13 best 6 pair speaker selectors
A 6-pair speaker selector is a device used in audio systems to manage and distribute audio signals to multiple pairs of speakers.Here's information related to 6-pair speaker selectors and their associated categories:
Selector Switch Boxes:
- Selector switch boxes are devices designed to route audio signals from a source (such as an amplifier) to multiple sets of speakers.
- They typically feature individual switches for each speaker pair, allowing users to control which speakers receive the audio signal.
Distribution:
- Distribution in this context refers to the systematic delivery of audio signals to different speaker pairs throughout a space.
- A 6-pair speaker selector facilitates the distribution of audio to multiple zones or rooms, providing flexibility in audio system setups.
Audio Video Accessories:
- Audio video accessories encompass a range of products that enhance the functionality and performance of audio and video systems.
- A 6-pair speaker selector is considered an accessory that aids in distributing audio signals to various speakers in a setup.
Accessories Supplies:
- Accessories and supplies related to audio systems include various cables, connectors, and devices like speaker selectors.
- The 6-pair speaker selector falls into the category of accessories that contribute to the overall functionality of an audio system.
Electronics:
- Speaker selectors are electronic devices that do not alter the audio signal but provide a means of controlling which speakers receive the signal.
- They are generally passive devices, meaning they don't require external power and work by routing the electrical signal.
Functionality:
- A 6-pair speaker selector allows users to connect multiple pairs of speakers to a single amplifier or audio source.
- Users can typically select which speakers are active or inactive, enabling them to play audio in specific rooms or zones.
Impedance Matching:
- Some advanced speaker selectors include impedance matching capabilities.
- Impedance matching helps in protecting the amplifier by ensuring that the total impedance seen by the amplifier remains within a safe range.
Installation:
- Installation involves connecting the speaker selector to the amplifier and then connecting each pair of speakers to the selector.
- Proper wiring and setup are crucial for optimal performance and to prevent any impedance mismatch issues.
In summary, a 6-pair speaker selector is an audio accessory used in the distribution of audio signals to multiple pairs of speakers. It provides users with control over which speakers are active at any given time, allowing for a flexible and customized audio setup. These devices are part of the broader category of audio video accessories and electronics used to enhance the performance of audio systems.
Below you can find our editor's choice of the best 6 pair speaker selectors on the market
Premium New and Improved 6 Zone Channel Speaker Switch Selector Volume Control Switch Box Hub Distribution Box for Multi Channel High Powered Amplifier Control 6 Pairs of Speakers - Pyle PSPVC6 Black
Pyle
Product description
Switch selector volume control switch box hub distribution box for multi channel high powered amplifier control 6 pairs of speakers
- Up to 6 Separate Speaker Pairs to your Stereo System
- Accepts Speaker Wires Up to 14- Gauge
- Handles 100Watts Per Channel with Speaker Systems that have a Minimum Impedance of 8 Ohms
- Up to 6 Separate Speaker Pairs to your Stereo System - Support Two Stereo Amplifiers
- Accepts Speaker Wires Up to 14- Gauge - Frequency Response: 20Hz-20KHz
- Handles 100Watts Per Channel with Speaker Systems that have a Minimum Impedance of 8 Ohms - Dimensions: 16.92- Inches(W) x 3.03- Inches(H) x 6.29- Inches(D)
- Protection Circuitry Keeps it Running Smoothly
- Individual Speaker Volume Control
User questions & answers
| Question: | can this replace my Pyle Pro PT |
| Answer: | No, not the devices have the same functions! |
| Question: | Ok, I bought the PT510 amplifier, and the PSPVC6 speaker selector, but not sure how to connect them together. Can anyone help |
| Answer: | Ok I'm going to try and keep it simple. Normally, once the amp is connected the 'sound' travels out of the red/white or left/right speaker connectors that are attached then to the speaker system. In your case, think of the speaker box as a 'conjunction' (like the words 'and/ but' in a sentence)..so just connect the 'speaker out' on your amp to the 'speaker in' on the speaker selector box...then connect the speaker box to the 6 speakers...be ready with a small flat head screw driver to open each the speaker connection ports...it's a bit more tedious but assures a professional non clip in/out connection...good luck...and make sure every thing is off to avoid 'blowing out' of the speakers and/or unit. |
| Question: | Does this have impedance protection - control against low ohms driving multiple speakers |
| Answer: | http://manuals.pyleusa.com/PDF/PSPVC4-6.pdf The last few pages of manual shows impedance of turning on combinations of speakers It is the amp that needs to be 4 ohm stable, I have a Denon AVR 3300 and AVR 2500. The more speakers active, the lower the impedance, (ohms Law) and the more power needed from the amp According to Crutchfield, we need a 4 ohm stable amp, and the Denon family provides overload protection, and the Denon amps have a 8 ohm (default) and a4 ohm setting I already fried an Onkyo amp, running all the speakers at once, for an extended period. |
| Question: | Is the Pyle PT510 240 Watt Amplifier a good receiver to use with this. I want to put sound in many rooms in my office |
| Answer: | I am by no means an AV expert. This amplifier was recommended to me by our AV guy in order to amplify the sound for distribution into several rooms in which we have speakers. We primarily use this amp in connection with an Apple TV device to play music from our iPhone or iPad in our kitchen, den, family room and outside speakers. Hope this response is helpful for you. Kind Regards, Robert |
Product features
Premium New and Improved 6 Zone Channel Speaker Switch
Features:
- Multi-Channel High Powered Amplifier
- Up to 6 Separate Speaker Pairs to your Stereo System
- Accepts Speaker Wires Up to 14- Gauge
- Protection Circuitry Keeps it Running Smoothly
- Individual Speaker Volume Control
- Support Two Stereo Amplifiers
- Rugged & Durable Housing Construction, Cabinet Heatsink
- Control Powered 6 Channel Amplifier
- Plug and Play Easy Install
Technical Specs:
- Power Output: 6 x 100 Watts, Power Supply: 120/240V Voltage Selector
- Amplifier Design: 6-Channel, Minimum Impedance: 8 Ohms
- Frequency Response: 20Hz - 20KHz, Signal to Noise Ratio: >81dB
- Channel Separation: 80 dB, Crosstalk between Channels: 50 dB
- Speaker Terminal Wire Size: 14-22 gauge
- Max. Amplifier Input: 100W RMS, 150W AVG
- Max. Output per Speaker: 18W RMS, 50W AVG
- Product Dimension (L x W x H): 6.29'' x 16.92'' x 3.03'' -inches
Premium New and Improved 6 Zone Channel Speaker Switch Selector Switch Box Hub Distribution Box for Multi Channel High Powered Stereo Amplifier A/B/C/D Switches | 6 Pairs Of speakers - Pyle (PSS6),Black
Pyle
Product description
PyleHome Model : PSS6
6-Ch. Stereo Speaker Selector
6 Channel High Power Stereo Speaker Selector
- Up to 6 Separate Speaker Pairs to Your Stereo System
- Accepts Speaker Wires up to 14-Gauge
- Handles 100Watts per Channel w/ Speaker Systems That Have Minimun Impedance of 8 Ohms
- Protection Circuitry Keeps It Running Smoothly
- Frequency Response: 20Hz-20KHz
- Dimensions: 9.05''(W) x 1.85''(H) x 5.90''(D)
This speaker selector box allows you to play audio to up to six different stereo speaker sets. It easily handles up to 100 watts per channel with speaker systems that have a minimum impedance of 8 ohms. Each input has an on/off switch. Protection circuitry keeps it running smoothly and prevents speaker burn-out. Accepts speaker wires up to 14 gauge.
- THE NUMBER 1 SELLER 6 ZONE SPEAKER SELECTOR:The New and Improved Multi Zone Speaker Selector Can Play 6 Sets of Speaker at the Same Time or What Ever Speaker You Want to Control or a Pair of Speaker from High Powered Amplifiers.
- CONTROL YOUR POWERED 6 CHANNEL AMPLIFIER:You Can Control Any Amplifier from Pyle Crown Denon Sony Panasonic Yamaha and Many More.also Control 4 10 4 6 8 Inch Speaker Box.
- PLAY ANY COMBINATION SETS OF SPEAKERS AT ONCE.:The Pyle speaker switch box Is great help for controlling ceiling speakers Wall Speakers home theater rooms monitor speaker loud speakers from all sizes 4 6 8 12 inch
- PLUG AND PLAY EASY INSTALL.The Pyle speaker distribution hub Is passively powered by your stereo - only need to plug in the wires.Its a good idea to add labels on the buttons for the different speakers so you don't have to remember each zone is
- WORRY-FREE SHOPPING: With the Pyle multi speaker switch we are confident of the quality of our product, therefore, we offer a 30 day money back guarantee no questions asked
User questions & answers
| Question: | I am installing in-wall speakers in multiple rooms. My question is what is the best cheapest in-wall volume controller that would work with this speaker selector |
| Answer: | There is no difference in for the install if you mount speakers in the wall or ceiling. |
| Question: | Several questions, How do you hook it to your stereo, I am hard of hearing so I hooked 3speakers to my stereo system,this is hooked to my tv when I turn it up some times it turns off by it self I do not understand that I would like more speakers all the 5 star reviews makes this product sound real good. the receiver |
| Answer: | I think so. They mount with a screw and clamp. The screw is accessible behind the removable front grill. The speaker comes with a template so you know what size to cut out in the wall or ceiling. After you insert the speaker into the recess, as you turn the screw, it tightens the clamp onto drywall, securing it in place. Although it is designed for drywall, I think it will work on anything with approximately the same thickness (~3/4 inch thick). |
| Question: | How Do You Hook A PSS6 Speaker Selector To A Pyle PCAU46A |
| Answer: | I would recommend a 5.1 home audio receiver. |
| Question: | can i play all 6 speakers at the same time |
| Answer: | The pyle pta44bt would be a good amp for the speakers. |
Product features
Premium New and Improved 6 Zone Channel Speaker Switch Selector Switch Box Hub Distribution Box
This speaker selector box allows you to play audio to up to six different stereo speaker sets. It easily handles up to 100 watts per channel with speaker systems that have a minimum impedance of 8 ohms. Each input has an on/off switch. Protection circuitry keeps it running smoothly and prevents speaker burn-out. Accepts speaker wires up to 14 gauge.
Premium New and Improved 4 Zone Channel Speaker Switch Selector Switch Box Hub Distribution Box for Multi Channel High Powered Stereo Amplifier A/B/C/D Switches | 4 Pairs Of speakers - Pyle (PSS4), Black
Pyle
Product description
Premium New and Improved 4 Zone Channel Speaker Switch Selector Switch Box Hub Distribution Box for Multi Channel High Powered Stereo Amplifier A/B/C/D Switches 4 Pairs Of speakers - Pyle (PSS4) Product description (optional) : PyleHome Model : PSS44-Ch. Stereo Speaker Selector4 Channel High Power Stereo Speaker Selector Up to 4 Separate Speaker Pairs to Your Stereo System Accepts Speaker Wires up to 14-Gauge Handles 100Watts per Channel w/ Speaker Systems That Have Minimun Impedance of 8 Ohms Protection Circuitry Keeps It Running Smoothly Frequency Response: 20Hz-20KHz Dimensions: 7.48''(W) x 1.97''(H) x 4.72''(D) This speaker selector box allows you to play audio to up to four different stereo speaker sets. It easily handles up to 100 watts per channel with speaker systems that have a minimum impedance of 8 ohms. Each input has an on/off switch. Protection circuitry keeps it running smoothly and prevents speaker burn-out. Accepts speaker wires up to 14 gauge.
- THE NUMBER 1 SELLER 4 ZONE SPEAKER SELECTOR:The New and Improved Multi Zone Speaker Selector Can Play 4 Sets of Speaker at the Same Time or What Ever Speaker You Want to Control or a Pair of Speaker from High Powered Amplifiers
- CONTROL YOUR POWERED 4 CHANNEL AMPLIFIER:You Can Control Any Amplifier from Pyle Crown Denon Sony Panasonic Yamaha and Many More.also Control 4 10 4 6 8 Inch Speaker Box
- PLAY ANY COMBINATION SETS OF SPEAKERS AT ONCE.:The Pyle speaker switch box Is great help for controlling ceiling speakers Wall Speakers home theater rooms monitor speaker loud speakers from all sizes 4 6 8 12 inch
- PLUG AND PLAY EASY INSTALL.The Pyle speaker distribution hub Is passively powered by your stereo - only need to plug in the wires.Its a good idea to add labels on the buttons for the different speakers so you don't have to remember each zone is
- WORRY-FREE SHOPPING: With the Pyle multi speaker switch we are confident of the quality of our product, therefore, we offer a 30 day money back guarantee no questions asked
User questions & answers
| Question: | I want to use this on two sets of speakers, one set for front height & second set for side surrounds and switch between the two. Is it possible |
| Answer: | I have speakers throughout my house. The Pyle Six-zone box allows me to have music in most every room. Hook each speaker you have to the Pyle and hook the Pyle to your receiver, speaker A or B. I have mine on B. Connect your receiver audio to your TV audio. There is a separate button on the Pyle that you should always keep positioned to on (button in). That is the easiest I can make it for you. This box works perfect for me and has never shut off. Good luck to you. |
| Question: | Does this switch allow me to control sets of speakers independently |
| Answer: | I am running an older Technics amp 2x100 6 pairs of speakers at times so I would say yes. Just remember you are putting this amp to a lot of work if you're running 6 pairs of speakers so watch the temps on the amp. |
| Question: | One person indicated what they believed the protection button was. Does anybody know? Pyle technical support apparently doesn't exist |
| Answer: | Maybe. The more speakers that you connect the lower their effective impedance as seen by the amplifier. And the lower the effective impedance the higher the current that the amplifier must generate in order to drive the speakers to a specific listening level without distortion.Most speakers, particularly the less costly ones, have a nominal 8 ohm impedance. So if you are driving one set of such speakers the amplifier will be seeing an 8 ohm load. But if your amplifier is driving 2 sets of such speakers the amplifier will be seeing 1/(1/8 + 1/8) = a 4 ohm load; if your amplifier is driving 3 sets of such speakers the amplifier will be seeing a 1/(1/8 + 1/8 + 1/8) = 2.7 ohm load, etc. With 6 speakers your amplifier will be seeing a 1.3 ohm load. And this would be a nominal and typically maximum load; in practice the load fluctuates depending on frequency and is effectively lower for short periods of time.Some amplifiers are designed to drive such low loads but many are not. If you try to do that with such a low current amplifier for a long period of time you will burn up the amplifier. That is why speaker selectors like this one have a protection button which basically adds a resistance in series with the speakers in order to increase the impedance seen by the amplifier. This will reduce the overall efficiency and you will notice that you have to increase the volume to get the same amount of sound as with the protection button off.So, if your amplifier has a sufficient current capability to drive those 6 speakers to your desired listening levels, great. If it doesn't, and if the listening level is too low for your tastes with the protection button on, you will need to either settle for lower volume or get a more powerful amplifier. |
| Question: | How do I hook this up to my 5.1 receiver |
| Answer: | The sound is great there is no distortion. |
Product features
Premium New and Improved 4 Zone Channel Speaker Switch Selector Switch Box Hub Distribution Box
This speaker selector box allows you to play audio to up to eight different stereo speaker sets. It easily handles up to 100 watts per channel with speaker systems that have a minimum impedance of 8 ohms. Each input has an on/off switch. Protection circuitry keeps it running smoothly and prevents speaker burn-out. Accepts speaker wires up to 14 gauge.
Premium New and Improved 8 Zone Channel Speaker Switch Selector Switch Box Hub Distribution Box for Multi Channel High Powered Stereo Amplifier A/B/C/D Switches | 6 Pairs Of speakers - Pyle (PSS8)
Pyle
Product description
PyleHome Model : PSS8
8-Ch. Stereo Speaker Selector
8 Channel High Power Stereo Speaker Selector
This speaker selector box allows you to play audio to up to eight different stereo speaker sets. It easily handles up to 100 watts per channel with speaker systems that have a minimum impedance of 8 ohms. Each input has an on/off switch. Protection circuitry keeps it running smoothly and prevents speaker burn-out. Accepts speaker wires up to 14 gauge.
- THE NUMBER 1 SELLER 6 ZONE SPEAKER SELECTOR:The New and Improved Multi Zone Speaker Selector Can Play 8 Sets of Speaker at the Same Time or What Ever Speaker You Want to Control or a Pair of Speaker from High Powered Amplifiers.
- CONTROL YOUR POWERED 6 CHANNEL AMPLIFIER:You Can Control Any Amplifier from Pyle Crown Denon Sony Panasonic Yamaha and Many More.also Control 4 10 4 6 8 Inch Speaker Box.
- PLAY ANY COMBINATION SETS OF SPEAKERS AT ONCE.:The Pyle Speaker Switch Box Is Great Help For Controlling Ceiling Speakers Wall Speakers Home Theater Rooms Monitor Speaker Loud Speakers From All Sizes 4 6 8 12 Inch
- PLUG AND PLAY EASY INSTALL.The Pyle Speaker Distribution Hub Is Passively Powered By Your Stereo - Only Need To Plug In The Wires.Its A Good Idea To Add Labels On The Buttons For The Different Speakers So You Don't Have To Remember Each Zone Is
- WORRY-FREE SHOPPING: With the Pyle multi speaker switch we are confident of the quality of our product, therefore, we offer a 30 day money back guarantee no questions asked
- Up To 8 Separate Speakers Pair To Your Stereo System
- Accepts Speaker Wires Up To 14-Gauge
User questions & answers
| Question: | Does this unit have impedance matching transformer feature |
| Answer: | Hi, yes the unit has an impedance matching transformer feature. You may check other details of the unit by visiting our website pyleaudio.com. Type the model number on the search box PSS8 for more details. Thank you. |
| Question: | I currently have.l a system set up with 16 gauge speaker wires. What would happen if I used the existing speaker wires in this device |
| Answer: | I think you will be fine, depending on how long your wire runs are. |
| Question: | Can you use it the opposite way....multiple recievers to one set of speakers |
| Answer: | No the only way you could do that is to biamp the reciever you could get a reciever with zone 2 or zone 3 and have different sound in different aera |
| Question: | How can it be both new and improved |
| Answer: | Increase connectivity range |
Product features
Premium New and Improved 8 Zone Channel Speaker Switch Selector Switch Box Hub Distribution Box
This speaker selector box allows you to play audio to up to eight different stereo speaker sets. It easily handles up to 100 watts per channel with speaker systems that have a minimum impedance of 8 ohms. Each input has an on/off switch. Protection circuitry keeps it running smoothly and prevents speaker burn-out. Accepts speaker wires up to 14 gauge.
THE NUMBER 1 SELLER 6 ZONE SPEAKER SELECTOR
The New and Improved Multi Zone Speaker Selector Can Play 8 Sets of Speaker at the Same Time or What Ever Speaker You Want to Control or a Pair of Speaker from High Powered Amplifiers.
PLAY ANY COMBINATION SETS OF SPEAKERS AT ONCE
The Pyle Speaker Switch Box Is Great Help For Controlling Ceiling Speakers Wall Speakers Home Theater Rooms Monitor Speaker Loud Speakers From All Sizes 4 6 8 12 Inch.
PLUG AND PLAY EASY INSTALL
The Pyle Speaker Distribution Hub Is Passively Powered By Your Stereo - Only Need To Plug In The Wires.Its A Good Idea To Add Labels On The Buttons For The Different Speakers So You Don't Have To Remember Each Zone Is.
OSD 6 Zones Speaker Selector w/Volume Control 300W Impedance Matching Dual Input On/Off SSVC6
OSD Audio
- SOUND QUALITY: The audio stays at a consistent quality with the SSVC6D to manage your speakers with volume controls to raise or lower the volume of each listening zone for perfect sound.
- IMPEDANCE PROTECTION: Impedance-matching frequency protection circuitry allows one amplifier to safely power multiple pairs of speakers without your amp or receiver overheating or damaging to the equipment.
- POWER: This speaker selector allows you to distribute an amplified signal for up to six zones throughout the house, letting you choose which source is playing in each designated zone.
- DESIGN: Front mounted master a/b switches are dual source for each separate zone to conveniently input and switch from one music source to another with on and off buttons.
- EASY INSTALLATION: The SSVC6D includes a removable phoenix connectors that accept up to a 14 gauge speaker cable to avoid frustration when connecting multiple speakers.
User questions & answers
| Question: | Can you tell me what the warranty is on this product |
| Answer: | This is just a simple switch - there are no delay elements in it. If you are experiencing echo, reverb, or feedback, the problem must be somewhere else in your setup. |
| Question: | Can I connect this to my receiver via bluetooth |
| Answer: | This won’t do what you’re trying to accomplish. This is a brilliant, yet simple, A/B switch. I use A for my PC audio out and B for my cell audio out to one set of headphones. |
| Question: | what is the maximum continuous amplifier power for which this product is compatible? The SSVC6 says 300W, but I can't find a spec for this one. THXS |
| Answer: | Short answer: Yes. Longer answer: You had me curious as to the answer, so I just hooked mine up the way you describe. I connected one PC going INTO the front headphones-out port, and another PC going INTO the speaker-out in the rear. Then I hooked up my speakers to INPUT B, and my headphones to INPUT A. That turned the A/B switch into an output selector and the front switch into an input selector. Everything worked fine, but for the completeness of the answer, I have to point out that the first time I connected things this way I got a 60Hz hum in my speakers, but disconnecting and reconnecting fixed that problem. I tested the speaker, volume, mic, and mute functionality, and they all worked well. Again, for the completeness of this answer, if I connect my Dell G7 laptop to a Type-C docking station (handling the audio, too), and the docking station connects to the Nobsound, and my headphones (with mic) are plugged into the Nobsound's headphones-out, then the laptop doesn't detect my headphones' mic. But that doesn't really bear on the answer you are looking for ( it's probably just a config I haven't sussed out yet); it's just something to be aware of. |
| Question: | What do I need to look for in a receiver to pair with this volume control selectors |
| Answer: | While you can connect up to four pairs of speakers, this device will not work as a surround sound device like having front, rear, center channels like a Dolby or DTS system. This only splits a stereo signal to multiple pairs of the same exact stereo signal.Hopefully this helps. |
Product features
Dual sourcec
The dual source allows you to have 2 different music sources connected, with some units offering the ability to select source per zone.
Volume Control
Using the same technology as our in-wall volume controls, most units offer volume control per zone.
Impedance Protection
Impedance protection allows a single amplifier to safely power several pairs of speakers without going below the amp’s impedance rating.
Easy to Install
Removable input/output phoenix connectors accept up to 14g wire and provide hassle-free hook-up.
OSD Audio 6-Zone Dual Source Speaker Selector
The SSVC6 speaker selector lets you add up to six speaker pairs around your house with individual volume controls for each speaker pair. Features removable input-output connector blocks for easy, yet secure wiring. Full impedance protection to protect your amplifier from low impedance when multiple speaker pairs are selected.
Niles SSVC-6 Speaker Selector, Color
Niles
Product description
The Niles name is synonymous with premier whole home audio solutions. For nearly four decades, Niles has delivered innovative products that enable simple and easy access to home entertainment, and we are now creating audio solutions that seamlessly integrate with lighting and climate control.
- Power Handling: 100 Watts Per Channel RMS; 200 Watts Peak
- Selectable Impedance Magnification For 1, 2, 3/4, 5/6 Pairs Of Speakers
- Individual Room On/off Selector Switches
- 12-step Controls; 54dB Maximum Attenuation
- Removable screwless connectors accommodate up to 12-gauge wire
- Accommodates 6 pairs of speakers
- Power handling - 100 watts per channel RMS; 200 watts peak
User questions & answers
| Question: | Can this selectror control volume |
| Answer: | Hi, Each speaker will have its own volume control independently. Will ship right away. Please order. Thanks. |
| Question: | Is this speaker switch temperature sensitive i.e. can I set one up in my attic and would possible temperature fluctuations affect its functionality |
| Answer: | The unit isn't much more than switches and potentiometers, so I don't think it would be sensitive to ambient temperature unless the temperatures encountered were EXTREME. As the other reviewer noted, your primary concern with an attic set-up would be accessibility. The whole point of the selector is to control a distributed audio system, so if you couldn't get to it easily it would be a waste of effort. I am very pleased with my selector. It works as advertised in my system and has never given me any trouble. |
| Question: | I have receiver ( sony strdh750 7.2 channel 4k av receiver) by what channel should i go to this speaker selector, i have center, front a, etc |
| Answer: | Hi,Unless you have speaker A and B selection on your Sony. Otherwise i wouldn't suggest you taking the main channel to speaker switcher. Thx. |
| Question: | Could this be used for 3 different speaker zones inside and 3 more outside with volume control for each zone? Using a Sonos amp |
| Answer: | I have to disagree with this answer. I have two of these units and they do control 6 pairs of speakers, this equals 12 total, not 6. Again the Niles SSVC 6 will control 12 speakers in pairs of two for right and left channel. It does have volume control as well as on/off control for each of the 6 pairs. This unit includes labels for each zone. It does send equal signal to each speaker set to balance out the ohm load on your amp or receiver to prevent over load. |
Niles SS-6 Speaker Selector
Niles
Product description
Niles SS-6 speaker selector
- Niles SS-6 speaker selector
- Protection circuit safeguards receiver/amplifier
- Separate left and right ground paths for compatibility with all amplifiers
- Removable connectors accommodate up to 14-gauge wire
- 10 year limited
- Handles up to 100 watts per channel RMS
- Protection circuit safeguards receiver / amplifier
User questions & answers
| Question: | Can this model handle 8-ohm speakers? Niles' website states that 4-ohm speakers should be used |
| Answer: | i used 8 ohm speakers. didn't realize there was a recommendation. |
| Question: | Could I run 5 surround sound speakers from my living room plus 4-6 other speakers throughout the house through this selector and my receiver |
| Answer: | If you are talking about using the Zone 2 on your receiver to power 4-6 other speakers you could but it would not be the best thing to do. one thing you have to make sure is that your speakers all have the same Ohm rating and that your receiver is capable with that that certain resistance. You would probably be safe with running 2 pairs of speakers but I would definitely not do 3 pairs. I would look into a 4 zone amplifier for that. Hope this helps! |
| Question: | I have a sonos amp and 8 ceiling speakers. Dont know the ohms of the speaker. Will this work |
| Answer: | It should work,range of ohms for niles 2-16 ohms it will match your 4 sets of speakers fine. |
| Question: | How does it connect from the receiver if your "outs" are only plugs |
| Answer: | The plugs (1-zone Each) have (4-each) set-screws with holes for 2 Pos & 2 Neg each speaker wires from receiver, or Amp SPEAKER output |
Xantech XSS26100W 6-Zone Speaker Selector (Discontinued by Manufacturer)
-Xantech:General Information-Product Model-XSS26100W:General Information-Product Name-XSS26100W 6-Zone Speaker Selector:General Information-Product Type-Speaker Selector:Miscellaneous-Package Contents-XSS26100W 6-Zone Speaker Selector Screw terminal WECO connector :Product Information-Compatible Devices-Speaker, Amplifier:Product Information-Features-Power handling: 50 watts per channel RMS; 150 watts peak Selectable impedance matching for 1, 2, 3/4, or 5/6 speaker pairs Compatible with 4-Ohm or 8-Ohm speaker systems Allows switching between two amplified source inputs 12-step volume control; 42dB maximum attenuation Isolated inputs for compatibility with all amplifiers :Physical Characteristics-Height-2.5":Physical Characteristics-Width-17.5":Physical Characteristics-Depth-6.3":
