10 best car amplifier fuse holders

• High quality: It is made of solid brass, with high conductivity, flame retardant, insulating transparent shell, and high-temperature PC base.
• Easy install: Because the fuse will be damaged during transportation, the fuse and fuse box are packed separately and can be used after simple installation after receiving the goods.
• Universal Compatibility: It is widely used in cars, ships, RV and other vehicles to protect your audio system. It is used for wire gauge 0, 2, and 4 AWG Cable
• 100% GUARANTEE! all Ancable products come 100% No Questions Asked Guarantee for either a replacement or refund. We care about only putting out high-quality products that satisfy your needs.

User questions & answers

Question:	Will this work for a 4 gauge
Answer:	I have never seen a replacement pilot bit for these hole saws. As far as I know you can not purchase a replacement pilot bit. I have worn out the teeth on the hole saw before needing to replace the pilot bit. I hope this might answer your question.
Question:	Is it waterproof
Answer:	Thanks for contacting Northside Electrical. Here's what's included:(1) 7/8" Thin Wall Hole Saw (49-56-9810)(1) 1-1/8" Thin Wall Hole Saw (49-56-9820)(1) 1-3/8" Thin Wall Hole Saw (49-56-9830)
Question:	Whats the diffrwncw between agu and agc amps
Answer:	No, these will not work on wood cabinet. They are more for drywall/ceilings.
Question:	could I use 6awg wire how does wire connect inside
Answer:	Yes. I have used it on that. I also do a lot of remodeling where I have to go through the old lath and plaster ceiling. It just keeps going hole after hole

Product features

Rockford Fosgate Single In-Line AGU Fuse Holder for 4 AWG or 8 AWG Wire

AGU waterproof inline fuse for 4 AWG or 8 AWG cable.Platinum plated fuse holder, flexibility of multiple wire size inputs. Inline AGU fuse holder, platinum finish.

• Custom tooled solid brass
• HPP plating for superior corrosion resistance
• Flexible for use with multiple wire sizes

Product description

Work between solar array and charge controller.



Package Included:

1 x in-line Waterproof Fuse Holder

2 x 60A AGU Type Fuse

• Current Rating: 60A.
• Two 60A AGU Type Fuses Included.
• Damp proof and Water-resistant ideal for automotive use.
• An in-line automotive fuse holder with a water and impact resistant crystal clear polycarbonate housing, wire terminals that accept up to 8 gauge wires.
• Ideal for custom protection circuits or to replace an existing defective one.

User questions & answers

Question:	Will this work with 6 gauge wire
Answer:	Mint (light green), not blue.
Question:	Is this a crimp style connection to the wire? Do you use wire crimp pliers to crimp the wire in each end of the fuse holder
Answer:	Long ACCURATE ANSWER and TIPS: Why? I imagine some lids fail to seat properly. I've posted similar tips before, but this is accurate and a correction for liquids, after I had a spill... A few lids in your set MAY have tabs that are somewhat difficult, very difficult, or impossible to lock down. I have 3 large sets that I bought used on Amazon. I had the 3 impossible to close lids replaced free, see OXO's guarantee on this product page/their website. It did take a few weeks for the package to arrive and I did not have to return the lids that did not fit properly. OXO's customer service is great, and I think many/all products carry a lifetime guarantee against defects. (See details for your product to verify.) TIPS: My troubleshooting/usage techniques... * Check the seal inside the lid rim to be sure it is fully seated. If not, push it down fully to properly seat it. (I use the tip of a spoon) Try again. * Turn the lid around and try again. * Try the lid on a different container or two to verify it is the lid that is malfunctioning. * This often works for me... If the contents do not contain liquid and 2 or 3 tabs lock, flip the container upside down with the open tab facing away from you and press down hard and attempt to lock the lid fully. * If there is liquid in the container, and a tab doesn't lock... Try pressing the tab toward the side of your countertop for leverage while holding the container securely and pressing down on the lid with your thumbs. I really like these because they're air-tight. I store all my dry-goods in these containers and label it with its contents using a label maker. The label stays on in the dishwasher! I refill the clean, dry container with the same bulk dry-goods, if not, I relabel with new contents. I'm ready to buy my used 4th set (huge di$count!). I also use these in my fridge, freezer, emergency kit, and for packed lunches. I hope this was helpful!
Question:	will this work for 4 gage wire
Answer:	Half inch 3/4 and 1 in but in reality these are inner diameter of pipe the ones that I bought for for electrical so the half inch hole saw would actually be a little bit bigger then a true half inch that's why they're in millimeters you kind of confusing but they fit electrical fittings perfectly
Question:	will this work for 4 gage wire
Answer:	As an electrician/Ac Controls installer These last cutting thru panels for my pipe..Ive had 2 sets over 3 years..the sizes are perfect for 1/2",3/4",1" pipe !!! The spring will break off after the 5th holecut but they stay sharp with no oil!!

Product description

BRAND DESCRIPTION

* Magic source is for With"Lead the Fashion Taste Life" for the Brand Service Concept,Car Audio Modification Technology is of High Quality Product Makers.

* Magic source For You Producted High Quality Product of Car Audio Power Wire ,Speaker wire, Signal Lines ,Casing, Capacitance,Low and High Turn a insureance etc.,Fuse holder, Power/Ground Distribution Block and speaker grills cover...





Why Would You Buy a Fuse Holder

Fuse is also known as fuse, it is a kind of electrical component installed in the circuit

to ensure the safe operation of the circuit. Therefore, the function of automobile

audio fuse is: when the circuit breaks down or is abnormal, the current is

constantly rising, and the rising current may damage some important or valuable

components in the audio circuit. If the fuse is correctly placed in the circuit

the fuse will fuse itself to cut off the current, thus protecting the circuit safety





Magic sourcewill provide you with a high-perfprmace fuse holder to protect your car audio from the current

Product function:Used to distribute multiple power supplies to supply multiple power amplifiers and ground

Installation scope: car audio refitting

Material: Oxygen Free Copper Power Wire and Copper O-ring Terminal, Solid Brass-High Performance Copper Car Audio Fuse Holder with Clear Heat Resistant Housing

Product features: Mini design saves more space

• The Power Wire with O-ring Terminal can be Directly Connected to the Battery .Easy and Fast Installation
• The Interior Is Made of Copper, And The Cover is Made of High Strength, Nonperishable Industrial-grade Plastic.
• Applicable to auto, boat or other vehicles, protect your audio system
• Package Included:1ft Copper Power Wire with O-ring Terminal and Inline MANL Fuse Holder with 60A mini Fuse
• Compact space saving design

User questions & answers

Question:	Dose it come with additional fuses
Answer:	I believe if they come in different colors they would say,, beware the tabs in the tops break off,,

Product description

Used to connect audio power lines to prevent excessive current, protection appliances.

Damp proof and Water-resistant ideal for automotive use.

Check your original size of fuse before buying: body diameter, body length, rated current, rated voltage.

• Product type: Fuse box; Rated Current: 60A
• The fuse holder is widely applied to inverter, car audio amplifier and other high current applications.
• Ideal for custom protection circuits or to replace an existing defective one.
• An in-line automotive fuse holder with a water and impact resistant crystal clear housing.
• Note: Please shut down power before your replacement. ANL fuse is not include.

Product description

Description: 1. The voltage display is the insurance holder will stay energized 2. Digital diode emitting minimal power consumption 3. If you do not want long-term display, you can put the insurance seat ground is not connected, connected to the ground when you need to check the line signals can be displayed! 4.Car Audio fuse holder high quality, gold-plated, with voltage display! 5.Package weight:350g Package include: 1xDisplay Fuse Holder

• Car Audio Conversion Digital Voltage Display Fuse Holder Low Consumption.The Voltage Display isTthe Insurance Holder Will Stay Energized.
• Digital Diode Emitting Minimal Power Consumption
• If You Do Not Want Long-term Display, You Can Put the Insurance Seat Ground is Not Connected, Connected to The Ground When You Need to Check the Line Signals Can be Displayed!
• Car Audio Fuse Holder High Quality, Gold-plated, With Voltage Display!
• This Will Protect Your Stereo System and Will Make Your Install Look Great.

User questions & answers

Question:	If zero guage is going in how big should the ground wire be
Answer:	Water resistant is probably a better question. There will be minimal water climbing into the top of your engine bay when driving so water shouldn't be too much of a concern. However, the ends have rubber grommets that wrap around the wire so it in theory should keep the interior fuse nice and dry
Question:	What are the included fuses rated
Answer:	AGU Fuses13/32" X 1 1/2", Ratings from 1 to 60 amps.AGC Fuses1/4" X 1 1/4", Ratings from 1/20 to 30 amps.
Question:	can it be connected to the cars battery jump start or does it have to got to the battery
Answer:	It's recommended for 4 AWG & 8 AWG. 6 AWG is right in the middle so it shouldn't be an issue. One side should connect to the battery and the other side should connect to the power on the amp. All you have to do is unscrew the end caps, put your wires in and tighten down the allen bolts on both sides. THIS DOES NOT COME WITH A FUSE. So you'll need to buy an AGU fuse to complete the connection 40, 60, 80, or 100 depending on your amp. The fuse is placed in the center of the holder. Hope this helps.
Question:	What gage in, what gage out
Answer:	There isn’t any triangle on the plastic cover, just the OXO label. But I’m not sure it matters, as I don’t put it in the microwave or even the dishwasher (don’t want the seal to deteriorate).

• Car audio ANL fuse holder with 300A ANL fuse（2 pack）
• 1/ 0 or 4 Gauge Input （Diameter: 10mm）
• No mounted terminals need for making connection
• High Conductive Finish, Flame-retardant and tranparant PC Base and Cover.
• 2 Screw Holes for Secure Mounting

Product features

Car audio ANL fuse holders are mainly used for the connection of audio power lines to prevent excessive current and protect electrical appliances.

• ANL fuse holder suitable for 0 2 4 gauge wire;
• With 2pcs ANL Fuse Holder and 2pcs ANL fuse;V
• oltage rating: 12V/24V
• Material: Zinc Alloy gold plated conductivity and Heat-resistant and transparent PC

Warning： Loose wiring may laed to excessive hot on the holder which melts the holder before the fuse blown！

Package:

2 x ANL fuse holder with ANL fuse

Product description

Work between solar array and charge controller.



Package Included:

1 x in-line Waterproof Fuse Holder

2 x 100A AGU Type Fuse

• Current Rating: 100A.
• Two 100A AGU Type Fuses Included.
• Damp proof and Water-resistant ideal for automotive use.
• An in-line automotive fuse holder with a water and impact resistant crystal clear polycarbonate housing, wire terminals that accept up to 8 gauge wires.
• Ideal for custom protection circuits or to replace an existing defective one.

User questions & answers

Question:	Will this accept 4 Gauge Wire
Answer:	Yes, it will work for either 8 gauge wire with the red insert or 4 gauge wire without the red insert.
Question:	Can i change the fuse amps to 40 amp fuse
Answer:	yes 4 will work. there is an insert that allows 4 or 8 gauge

Product description

Freajoin In-Line AGU Fuse Holder 2PCS 8/10 Gauge AWG with 4PCS 80Amp Fuses

• 8 or 10 Gauge AGU Fuse Holder
• Include 2PCS Fuse Holders and 4PCS 80Amp AGU Fuses
• High-Strength Clear Housing with Durable Base, Heat Resistant
• Satin Nickle and Gold Plated for Conductivity
• Easy Installation for Multiuse Combinations

Product description

1ft of 99.9% Oxygen-free Copper Wire

Soft Touch Jacket

Stranded Copper

AGU Fuse Holder with 60A Fuse

4 Gauge Crimp Ring Terminal with Rubber Boot

• 1ft of 99.9% Oxygen-free Copper Wire
• Soft Touch Jacket
• Stranded Copper
• AGU Fuse Holder with 60A Fuse
• 4 Gauge Crimp Ring Terminal with Rubber Boot

User questions & answers

Question:	Can i replace fuse to a 0.5 to 1 a (5mmx20mm)agu fuse to protect an arduino
Answer:	Yes,It is already installed with a 60A Mini ANL fuse.If you want to replace the fuse with different amperes, you can buy it and install it yourself.Thank you!
Question:	Is this the correct setup for adding a 5 switch light box to the my pickup camper
Answer:	Yes, it says between 4 to 8 gauge. It's great quality!
Question:	do you make one with a 10 amp fuse? or I have to buy the fuse separate
Answer:	The fuse holder itself has a set screw on each side. You unscrew the set screw enough to get the wire in, then tighten them down. What you do with the other side of the wire that goes from the battery to the stereo is up to you.
Question:	Can you replace the 60 amp fuse
Answer:	YES

Product description

-LEIGESAUDIO is the symbol of high-quality car audio.

-All of our innovative products are designed and engineered for high performance by the best industry experts from different countries.

-To fit your system needs,we offer a series of complementing connectors and accessories-all designed to work together precisely.

• Solid Brass-High Performance Copper Car Audio Power Fuse Distribution Block
• 0/4 Gauge In To 4/8 Gauge out
• Compact 2 Way Fuse Block With Mini ANL Fuses
• The Interior Is Made Of Copper, And The Cover Is Made Of High Strength, Nonperishable Industrial-grade Plastic  
• Applicable to auto, boat or other vehicles, protect your audio system.

User questions & answers

Question:	I have 2 Amps. One 2000w (70 amp) ,second 500w (30 amp) plus a 3 farad cap on sub side. My question is should I a use 25 amp fuse since it’s smaller
Answer:	Yes
Question:	Can I put different size fuses for each side in this block
Answer:	yes, you are right
Question:	Can you put this work for a 0 ga wire
Answer:	I just installed thick 4 AWG welding cable into mine. You have to take out the red cap ends and there is an additional removable sleeve where the cable inserts into the socket. Note, best to use ferrules on your wire ends before using an Allen head driver to crimp down on the ferrule with the wire inside vs tightening down with just the Allen head screw. Mine did not come with and Allen head wrench, but two fuses.
Question:	Is each side rater for 60 amps or is the entire block rated for 60 amps
Answer:	Yes
Question:	Do you have a cover? I keep triggering it while packing the vehicle for transport
Answer:	I used 4 gauge wire for power and ground. You want to make sure to have enough ground proportional to your power supply.
Question:	Do you have a 250a
Answer:	100a
Question:	will 2/0 awg wire fit
Answer:	You can have it where ever you want long as it runs to the amp
Question:	Will it fit 4 gauge wire
Answer:	0 guage in. 4 gauge X 2 out