14 best mpow vent mounts

Product description

The role of the car phone holder is mainly to provide a carrier for the mobile phone. By fixing the mobile phone to the car phone holder, you can use mobile phone navigation, video and voice calls, etc.



Product features of this car phone holder:



1. Upgrade the car mount arm, change the curved clamp arm to the rectangular clamp arm, change the center of gravity of the clamp arm, and better hold the mobile phone



2.The car phone mount is compatible with phones up to 6.8 inches, including iPhone 11 Pro Max, XS Max, XR, X, 8/7/6 Plus; Samsung Galaxy S10, S9, S8, Note 9/8/7 and more



3. Upgrade the clip of the car phone mount, the 3-level adjustable clip is easy to install and disassemble, the clamping force is stronger, and it can be better fixed in the vent



4. Ball joint design, you can rotate 360 degrees through the ball joint until the comfortable angle of view



5. We have reserved enough space for the charging cable between the two car phone mount feet to ensure that the phone can be charged normally.



6. On the surface of the product, the inside of the clamp arm and the car phone mount foot are attached with a sponge pad and a silicone pad to reduce the friction of the mobile phone and the mount, and protect the mobile phone.

• Adaptable to Most Phone Sizes: The phone holder expands up to 95mm/3.7in wide, holds most phones with screen sizes between 4.7’’ and 6.8’’, including iPhone Xs Max/XR/XS/X/8 Plus/8/7 Plus/7/6 Plus/6/6s Plus/6s; Galaxy S10/S10 Plus/ S9 Plus/S9/Note 9/Note 8/S8/S7/S7 Edge/S6 Plus/S6; Pixel/Pixel 3 XL/3/2XL/2/XL; LG; BLU; Xiaomi; Moto and more. TIPS: Supports phone case thickness up to 13 mm / 0.5 inch.
• Upgraded Arms for Secure Hold: The side arms have been upgraded for stronger stability. Compared with the old version, the center of gravity of the arms has been shifted up so that your phone stays put without wobbling. There are sponge pads on side arms, which will protect your device from falling out and scratching.
• Stays Put Without Falling Off: Featuring inner Manganese Steel plates and durable PC material, the extended vent clip will stay in place regardless of the road conditions. The spring-loaded vent clip is equipped with an adjusting lever, providing you with 3 different tightness. 1st level: 2.5 - 3.5mm; 2nd level: 1.8 - 2.5mm; 3rd level: ＜1.8mm, fits most vertical or horizontal vent louvers.
• Easy One-Handed Operation: The car phone mount has a quick-release button on the back. There is no need to expand the arms with your hands, just place your phone in the holder and squeeze the arms to hug your devices. Also, you are allowed to remove your phone without hassle. There is space between the bottom feet for you to attach a phone charger.
• Keep Your Phone in Sight: The 360 degrees ball joint ensures that you hit the sweet spot every time you place your phone in the car phone holder. You can get the comfortable viewing angle by adjusting the mount up/down or vertical/horizontal. The air vent-mounted car mount enables you to access your GPS, music and all controls easily without blocking your vision while driving.

Product features

Mpow universal air vent car phone mount

Mpow air vent car phone holder has been designed to fit most car air vents due to its three-level thickness settings. With Mpow car mount, you will free your hands from holding smartphones and improve driving safety without blocking your sight.

Reserved Charging Port

At the bottom of the cradle, there’s a reserved space. It is the perfect size for a phone charger to go through. Don’t have to take your phone out of the cradle.

Fits the vast majority of smartphones easily

The stretchable clamp can hold devices with a size of 4.0 - 6.8 inches, perfect for iPhone, Galaxy, Google Pixel, BLU, OnePlus, Motorola, LG and so on.

Adjustable Angles

Fully adjustable with 360-degree rotation for viewing your device at the right position. Change your perspective with a simple ball-and-socket joint.

Product description

WHY CHOOSE MPOW AIR VENT PHONE MOUNT?



Upgraded Air Vent Clip



-Twist-lock Mechanism: Adjust and lock with a twist of the knob, adapting to air vent blades of different thickness;



-Premium Materials: Made of high-temperature resistant PC and glass fiber material, which is not easy to deform even after long-term use.



-Stronger and More Stable: With triangular support and anti-falling design, it is 20X steadier than the dual-sized clips on the market;



Thick Case Friendly



The 2cm (0.8in) deep clamp of this cell phone holder is not only compatible with various phones, but also can work well with otterbox, wallet case and most thick phone cases.



Note: The total thickness of the phone and the case should be less than 20mm (0.8in).



Get Both Quality and Aesthetics



The car phone holder features a solid PC construction. In addition to durability, the air vent phone holder also boasts an elegant appearance and polished mirror surface, this means it can perfectly blend into your car interior.



Kindly Note:



1. The car phone holder does not work with the pop holder and phone ring holder.



2. The vent clip is suitable for vertical or horizontal air vent blades, not for non-intensive, arc-shaped, or retraction type air vents.



Package Content:



1 X Car Phone Mount for Air Vent



1 x Air Vent Clip



1 x User Manual

• Compatible with Phones up to 6.9'': Works with almost all smartphones from 4.0'' screens to 6.9'' screens, including but not limited to all iPhone Series and Galaxy Series. It also has the ability to be compatible with otterbox, leather case, wallet case and more cases up to 20mm (0.8in) thick
• Never Fall off: Featuring a screw-lock system and heat-resistant material, the vent clip is 20X more stable than other dual-sized clips, you don’t have to worry about the phone shaking and falling whenever you are driving across rough roads. The car mount fits 99% of the air vent slats (horizontal and vertical).
• Adjustable Bottom Feet: The car phone mount has 2 adjustable feet at the bottom, you can move them up and down to find the perfect position for small or large phones. Also, the side buttons of your phone will not be blocked. The 27mm reserved charging port allows you to charge your phone with ease.
• Dual Release Button: The air vent car mount has 2 quick-release buttons for easy operation with both right and left hands. You can mount and remove your phone in just 0.1 second by simply tapping the button on either side, you don’t need to fumble for the button on the back.
• 360° Viewing Angle: The air vent mount features a 360° ball joint that assists in adjusting the viewing angle for a clear screen view, whether in landscape or portrait mode. The adjustment can as well guarantee safe driving while navigating, talking, listening to music, etc

User questions & answers

Question:	can it hold a LG flip phone ??? They are narrow....about 2 inches. thanks
Answer:	It's wider than 2"
Question:	Will it hold a galaxy s20 and s20 plus both have a ub pro supcase case
Answer:	The product expands. So I say it should. I have a iPhone.
Question:	How does this phone holder perform/hold up while driving in vertical vents? Does it fall out
Answer:	I have not had an issue with the phone holder falling out. There is a twist mechanism that stays tight ince you fit it onto the vent.
Question:	How about the quality of this phone holder
Answer:	I bought more than three car phone mounts, this is the best one. It can hold my iPhone 12 with a thick case securely on the bumpy road.

Product features

Reliable Protection

The stable structure of the air vent car phone mount can hold your device securely in place during a bumpy ride. Mpow pays great attention to details. The side arms and bottom feet of the car phone holder are thoughtfully designed with soft thick silicone pads, which can not only prevent the phone from falling, but also protect your expansive phone from being scratched.

Adjustable Fit

The car phone holder is equipped with adjustable feet and preset calibration, just move the feet up and down, you can find the sweet spot to place your phone. The intention behind this design is to adapt to different sizes of phones (4.7‘’~6.9’’) to get the optimal installation stability.

Durable Vent Clip

Made of high temperature-resistant PC and glass fiber material, the vent clip is not easy to deform and fall off during a long-time clamping process, and is 20 times more durable than ordinary ABS material; The width of the clip is adjusted by turning the knob to get wider compatibility

Easy Assembly

Unscrew the nut;

Pass the nut through the ball head;

Tightly push the ball head into the joint;

Tighten the nut.

Product description

Mini Size



The magnetic car phone holder is cradle-less, so it takes up less space in your car. Its pocket size keeps your car uncluttered and tidy while allowing easy access to your phone, no more blockage of your windshield and dashboard.



3 Options for attaching the Metal Plate



Option 1: Without Phone Case: Attach it directly to the back of the phone.



Option 2: With Thick Case (>2mm): Attach it to the back of the phone case (Use the square metal plate).



Option 3: With Thin Case (≤2mm): Place it between the phone and the case - either with or without using the adhesive.



The Proper Position to Attach the Metal Plates



Wireless Charging Phones:



- Place the metal plate at the bottom of the phone/case to prevent blocking the Qi charging coil.



-When charging wirelessly, remove the case with the metal sheet attached.



Non-wireless Charging Phones:



Place the metal plate at the center of the phone.



Kindly Note:



1. If your phone case is too thick (>2mm), please stick the metal plate on the back of the case.



2. If your phone has Qi wireless charging or NFC functionality, please stick the metal plate on the phone case, and then remove the case when using these functions.



3. Before attaching the metal sheet directly to the device, the transparent protective film provided should be used to prevent scratches or residues.



4. If your phone is large or heavy, please use the square metal plate to enhance the magnetic force.



5. The vent clip is suitable for vertical or horizontal air vent blades, not for non-intensive, arc-shaped, or retraction type air vents.



Package Contents



2 x Magnetic Car Phone Mount Holders



2 x Air Vent Clips



4 x Adhesive Metal Plates



4 x Protective Films

• Powerful Magnets & Secure Hold: The magnetic phone car mount features 4 inbuilt powerful neodymium magnets, which can hold phones securely in various road conditions. The closed magnetic field is 100% safe for the phone and will not cause interference to the signal.
• Compatible with Phones of All Sizes: The cradle-free design works with almost all phones with or without a case, including iPhone 11/11 Pro/11 Pro Max/Xs/ Xs Max/XR/X/8/8 Plus/7/6; Galaxy S20+/S20/Note 10+/Note 10 and more. Note: Does not work with Tablets.
• Easiest Mounting Solution Ever: The magnetic mounting system is 10 times easier to use than any other mount. Just place your device on the magnetic surface and it instantly locks securely in place. You can easily rotate your smartphone for a portrait or landscape view.
• Stable Clip and Firm Grip: Thanks to the built-in steel core and silicone coating, the air vent clip boasts a strong clamping force to prevent your phone from sagging and falling during bumps and turns. The long clip fits most horizontal and vertical air vent blades.
• Value Pack: The kit comes with 2 magnetic car mounts (for 2 cars and family) and 4 metal plates which can be attached on the back of the phone directly, or between the phone and case, or on the back of the case. Note: Wireless charging won’t be disturbed when you place the plate at the bottom of the phone.

User questions & answers

Question:	Does it hold the Iphone 12 pro with or without that sticky part on the back
Answer:	If u have a case u can put it in between case and phone without peeling off sticker and works just the same!
Question:	Does this product actually work
Answer:	It works for my phone case. It comes with a circular and rectangular magnet. I used the circular one. It has a strong grip.

Product features

Compatible Phones

- iPhone 11 / 11 Pro /11 Pro Max / XS / X /8 Plus / 8 / 7 Plus / 7 / 6 Plus / 6 / 6s Plus / 6s / SE / 5S / 5C / 5;

- Galaxy S20+ / S20 / Note 10+ / Note 10/ S10+ / S10 / S10e / S9+ / S9 / S8 / S8+ / S7 / S7 Edge Plus / S6 / S6 Edge / A9 / A8 2018 / A7 / A6 / A5 / A4 / J7 / J6 / J5 / J4+ / J4 / J3;

-For Google Pixel 4 / Pixel 4 XL / Pixel 3 XL/ Pixel 3 / Pixel 2 XL / Pixel 2 / Pixel / Nexus 6P / Nexus 4 / Nexus 5;

- For LG G6/G6 Plus/V30/V30 Plus;

- For Sony, HTC, Nokia, Motorola, Blackberry and more smartphones

Incompatible Devices and Cases

It is recommended to use a thin case (≤ 2mm). If the case exceeds 2mm, please attach the metal plate directly to the back of the case.

Not compatible with tablets, ultra-thick/heavy cases, rugged cases, pop holders, wallet cases, battery cases, phone ring holders.

Powerful Magnetic Force

The 4 magnets create an incredibly strong force of attraction, ensuring that many smartphones can be easily secured onto this car mount. Due to this magnetic strength, your device will be steady all the way regardless of potholes and speed-bumps.

Ways to Install

Directly to Device: Attach the metal plate to the back of the phone.

Directly to Case: Attach the metal plate to the back of the case.

Between the Device and the Case - Either with or without using the adhesive

Extended and Stable Clip

Features a steel-cored and silicone-coated clip, the magnetic car mount can firmly grip the air vent and protect your phone from falling off. Regardless of the road conditions, it will hold your phone steadily without damage to the vent blades

No Falling Off

Just hover your phone near the magnetic surface and it instantly locks stably. The magnetic surface is coated with silicone to eliminate shocks and scratches, you don’t have to worry about your phone falling off, even if you are driving on a bumpy road.

Mounting Kit Included

The magnetic car phone mount includes 4 metal plates and 4 protective films. The protective film is recommended to be used when you apply the metal plate directly to your device. ​Doing this will aid in the ease of removal of the plate in the future.

Safe and Interference-free

The strong magnets form a closed magnetic field to make the car phone holder safe to use, so that the phone and signal of GPS and communication will not be affected. The car mount is the effective ways to keep your device safe while you are driving

Product description

2 pack car phone mount you can get two car phone mount, and you can use one as backup.



mpow car phone mount Holder were sold after repeated tests, so it has good performance, can be perfectly fixed in the air vent, the cell phone will NOT fall off from the magnetic mount, the product is designed to rely on strong Magnetic force, so the design is relatively simple, without other fixtures, you can rotate the mobile phone on the car mount Magnetic surface.



effortless installation. Insert the mount in the air vent mount in your car;

2. Place the magnet metal plate in your case between the cover and the phone, or stick on the round magnet metal on your phone or gps



dual setting clip

mpow car mount holder offers two thickness settings to ensure a Secure fit onto your air vent. One is for thin air vent blade, The other is for thick air vent blade.



360 degree swivel allows you to quickly adjust to optimal angle in 360 degrees. No blind Side.1. This car mount may not fit in with AC vent;

2. This car mount can hold phones (with cases) that weigh under 7. 05 ounces;

3. Thick cases such as Otter boxes, and unsmooth cases may not work well with this car mount

• Good compatibility: Magnetic car phone mount holder products rely on magnetic fixed smartphones, wide compatibility, including iPhone 11 Pro MAX/XS MAX/XS/XR/X/8/7/6 Plus, Samsung Galaxy S10/S9/S8/S7 /S6, Note10/9/8/7/5, Motorola G6/G6 Plus/G5, Google Pixel 3 XL/Pixel 2 XL and more smartphone
• Strong adsorption capacity: Mpow car phone mount holder has four powerful magnets, magnetic car mount produces an intensive force of attraction that will hold any smartphone, ensure your phone stay securely when you are driving.
• Easy to install and remove: Use one of the provided protection film on your phone before placing the metal plate, then, place the metal plate, finally, put the phone on the surface of the car phone mount. No sticky marks on the back of the phone.
• Good stability: Mpow magnetic mount holder is designed with a sturdy rubber base, and the cruciform slot on the tail of the mount can meet different thickness of blades. This mount material not only has good stability, but also does not scratch the vent.
• Warranty: Every Mpow car phone mount includes a 45 days money back & 24-month.

User questions & answers

Question:	Does this product affect wireless charging
Answer:	No, it has not affected my wireless charging.
Question:	How can the base stay on the vent when you remove phone from magnet? Whole unit comes off vent when i remove phone
Answer:	I do not have that issue. Try adjusting the vent so the rubber prong are snug. I place my phone so the Mpow circle is in the middle of my phone. I have an Apple 6.
Question:	does anyone proof read these ? "keep your phone stay securely
Answer:	You shouldn't be asking me this question
Question:	Does this work with mophie charging case with magnet inside case
Answer:	I can't guarantee that it will since I haven't tested one out yet but I don't know if you read my review but i used two plates within my case and two magnetic vent holders. I did this because the weight of my phone and magnetic grip was great for my iPhone 7 Plus in the apple leather case. Not because one wouldn't hold it but because i wanted that extra strong grip. I would recommend you doing the same even if your using the iPhone 7+ and the mophie charging case. (you didn't specify wich phone you had) Just because charging cases thicker than most common cases. I did test just 1 holder with my iPod touch in an otter box with the metal plate in between the 1st layer (soft rubber exterior) and 2nd layer (hard plastic) of the case and it worked really good. I am 99% confident that if you have the iPhone 7+ in a mophie case and use the two holder technique that I used it will hold it. I hope this information helps you and if you do choose to try it let me know how it goes.

Product features

Mpow Magnetic Air Vent Car Phone Mount

This is the Mpow magnetic Mount, Stick the metal plate directly on the phone or on the phone case. Mpow's loading capacity is less than 300g (10.6OZ)

two jaws can be selected

Our mount have two jaws for your choice, depending on the thickness of your air vent blades.

One step installation

The advantage of the magnetic bracket is that it is easier to operate, without any buttons, just put a protective film and a metal plate and put the phone on it.

Packing list

The advantage of the magnetic bracket is that it is easier to operate, without any buttons, just put a protective film and a metal plate and put the phone on it.

Product description

About MPOW As a leading car mount producer, Mpow stays attention on creating innovative products to provide the best experience for global customers. More than 5,000,000 customers chose Mpow and the number is growing up. Effortless Installation Press button on back of unit to slide open and then take out mobile phone. Press the arms on both sides to clamp mobile phone again, simple of operation. Double Security The clamp also comes with 2 support feet to stabilize your device--- three direction to clamp mobile phone, 360 degree rotation. 360 Degree Swivel Innovative ball head construction allows you to quickly adjust to optimal angle in 360 degrees. Anti-Scratch Material Any parts that get in touch with the phone have been attached with a soft silicone material to prevent scratching issue. NOTE 1.This car mount may not fit some retractile type, arc-shaped or non-intensive air vent. 2.Please be careful when installing the mount to the air vent blade as the powerful clamping force may damage the air vent if you push with violence. 3.For any inquiries or comments concerning our products, please send an email. we will respond to you as soon as possible.

• Universal Phone Mount: Compatible with a variety of mobile phone models, including iPhone 11, XS, XR, X, 8, 8Plus, Samsung Galaxy S9, S8, S7, Google Pixel, Huawei, One Plus, LG and more smartphone under 6.5 inch
• Secure Base: The high quality rubber construction of the base guarantees the base will solidly hold the mount regardless of road vibrations.
• Installation suggestion: due to the characteristics of the vent, the weight of the phone may cause the stand to tilt downwards, you can insert the base into the uppermost vent slot, so the car phone holder will not tilt down.
• 360 Degree Rotation: The ball head is connected to the base, you can rotate freely. Whether you like vertical or horizontal screen, this Vent mount can meet your requirements. You can fasten the ball head by rotating the screw.
• One Button Release: Mpow car phone mount with quick release button the phone can be quick released, the mount telescopic arm can extend from 1.9in to 3.6in

Product description

car phone mount

• Super secure base: The high quality rubber construction of the base S the base will solidly hold the mount Regardless of road vibrations. Our air vent Car mount holder is much easier to use than others due to its simple and complementary design.
• All-around protection: There are sponge cushions on the car phone mount for secure and wobble-free fit for your cell phone. Foldable holding feet allow hassle-free charging for your cellphone.
• 360 degrees rotation: Mpow mount holder can fully adjustable with 360 degree rotation for viewing your device at the right position. Change your perspective With a simple spin.
• Universal fit: Mpow car mount be designed with one-button released function, The width of holder can be flexibly adjusted to hold phones of size from 4. 0’’-6. 9", Suitable for iPhone 7/7 Plus, Galaxy S7/S6, Google Nexus 5/4, HTC and GPS Device.
• One Button release: Mpow car phone mount with quick release button the phone can be Quick released. The mount telescopic arm can extend from 1. 9in to 3. 6in and pivot up or down for optimal viewing height. Prevent from blocking your view while driving.

Product description

Wide Phone Compatibility  Accommodates 4.0-6.8inches phones with or without case,including but not limited to iPhone 11 Pro Max/ 11 Pro/11/Xs Max /XS/X /XR/8/ 8 Plus/7/6/5; Galaxy S20+/S20/Note 10+/Note10 /S10+/S10/ S9/S8/S9+/Note8/8+/S7/S7edge/S6/S6edgePlus/Note5, OnePlus and more...  Tips: Thickness of phone + case:≤13mm It is recommended to remove the phone ring holder/Pop holder

Warm Tips: For Dashboard/Windshield Mounting 1. Do not install the suction cup on curved/rough/dirty surfaces. 2. When summer approaches or days are getting hotter, please avoid constant direct exposure to the sun as this may affect the performance of your phone holder for car. 3. Push the lock lever down to lock the suction cup after installation. 4. Please tighten the knob on the telescopic arm after adjusting the angle. For Air Vent Mounting: 

1.The vent clip is suitable for air conditioner vent with vertical or horizontal blades, not for non-intensive, arc-shaped, cross or retracted air vents. 2.Avoid the dial on the air vent blade when turning the screw.

Specification: Material: Suction Cup: TPU; Air Vent Clip: PC + Nylon + Fiber Length of the Telescopic Arm: 4.3~5.9in/10.8~15cm Width of the Phone Holder: 2.6in~3.5in/6.64cm~9cm The thickness of Vent Clip: Max. 0.8in/2.05cm Length of the Adjustable Foot: 0.7in/1.9cm

What’s in the Box? 1 x Phone Mount for Car 1 x Suction Cup Base 1 x Air Vent Clip

• Multiple Mounting Positions：The car phone mount holder includes an air vent clip and a suction cup that you can mount it on your air vent, windshield or dashboard. 2 types of bases provide different mounting options in different positions, so you can mount your device wherever you want it
• Secure Twist-lock Clip: This vent clip features a twist-lock system to adapt to thin or thick air vents. To install the car phone holder to your car's air vent, simply loosen the twist lock, push the clip onto the air vent blade, and then tighten the twist lock to secure. The mount is quite stable and is unlikely to move, even over bumpy roads.
• Universal Compatibility: The car phone mount fits phones with 4.0-6.8" displays and up to 3.5in/9cm wide, including Galaxy Series, iPhone Series, HTC, Nokia, etc. The bottom foot can be adjusted up and down to secure phones of various sizes. The Quick-release Button enables you to mount and remove your phone with one hand in seconds.
• Strong and Secure Suction Cup: The TPU vacuum suction cup features sticky gel that ensures a tight hold on flat surfaces to maximize stability. Plus, the 2-step locking lever provides additional mounting support for multiple surfaces - smooth or textured surfaces. If the gel loses its grip, simply wash, dry, and re-attach.
• No Angle Limit: The car mount has a telescopic arm that can extend from 4.3in/10.8cm to 5.9in/15cm and pivot 260° to reach your desired viewing angle. Also, the 360°rotatable ball joint enables you to swivel your phone for portrait and landscape view. For added convenience, the newly designed arm makes angle adjustment easy and smooth.

User questions & answers

Question:	Will this work with the mophie exta battery phone case on an iphone xr
Answer:	Sorry, not use in that kind of phone. But hold well with my motorola G power with case.
Question:	What is the diameter of the ball of the ball joint
Answer:	Dont know but its a little bigger than a marble
Question:	What is the difference between the normal and the 2 in
Answer:	It also moves easier, if you want to move it just pull out the extendable arm or push it back in, whereas the normal one you have to twist a knob. I don’t have one, I just read both descriptions to learn the differences. I think that I will spend the $3 not to have to turn the knob and have less of a chance that I could wreck. But honestly I guess our best bet is to not move it around while driving. So it just depends on which you would rather do. Lol 😂 now I don’t know which one I want again, it’s only $3 but I won’t be attaching it to my air vent and the normal one attaches to dash or windshield so that’s enough for me in that regard.
Question:	Does the ball joint allow the phone to be angled a little as well
Answer:	Dear Customer, Thanks for your message. The 360°rotatable ball joint enables you to swivel your phone for portrait and landscape view.

Product features

Adjustable Bottom Feet

The 19mm adjustable feet can not only adapt to different sizes of smartphones for better stability, but also prevent the arms from interfering with the side keys of the smartphone.

Easy Length Adjustment

The innovative bead structure makes length adjustment easier and faster. Just push and pull the arm to get the phone closer to you. No need for screws and manual fixation.

Secure Grip

The side arms are designed with serrated soft cushions, which can increase the friction and clamping force to prevent your phone from falling off due to bumps.

Product description

Mpow superhero car mount is not only unique in design, but also unparalleled in functions. It is the combination of car mount and wireless fast charger. It provides 10W, 7.5W and 5W charging powers to Qi-enabled phones and automatically switches charging powers according to phone models. During the charging process, Mpow fast charging car mount provides overheating protection, overcurrent protection, overvoltage protection, overpower protection, overcharge protection and short circuit protection to the phone.

Charging Modes

10W (A QC2.0/QC3.0 adapter is needed): for Samsung Galaxy S9/S8/ S8plus/S7/S7 edge/S6 edge plus/Note 5 series devices

7.5W (A QC2.0/QC3.0 adapter is needed): for iPhone 8/ iPhone 8 plus/ iPhone X

5W (A 5V/2A adapter is needed): for all Qi-enabled phones

Notes:

1. The thickness of the phone case should be less than 4mm while charging with case.

2. A QC 2.0/3.0 adapter is needed for Qi fast wireless charging. You are advised to use qualified adapter.

3. Align the smartphone with the charging center when set the phone. The Qi coil is generally in the middle of the phone.

4. Do not charge via computer’s USB port for the voltage is too low to support wireless charging.

5. Ensure that there is no metal object in the middle of the charging area.

Specification:

Color: black

Weight:140g/5oz

Length of cradle arms: 59cm/23in-90cm/35in

Charging modes: 10W; 7.5W; 5W

Thickness levels of the clamp: 1.8mm/0.07in; 1.8-2.5mm/0.07-0.1in; 2.5-3.5mm/0.1-0.14in

Package Contents

Air vent car mount x1

USB charging cable x1

User manual x1

• 2-In-1 Wireless Charging Car Phone Mount: The phone mount holder combines a stand and wireless charging technology, you can navigate while charging your phone, no messy data lines, no matter whether it is navigation or charging, it will bring you a better experience.
• Automatic Charging Mount: You only need to put the phone on the Mount, adjust the phone position, Mpow mount can automatically identify the phone model, choose the right charging mode, charge your Qi-enabled phone.
• Good Stability and Flexible Rotatable Performance: After repeated testing by us and the market, the mount can hold your phone tightly and fix it in the air vent, even if the road is bumpy. And because of the unique design, the flexible ball head ensures that you can freely rotate and adjust the angle of the phone, and the phone is always in the adjusted position.
• Fully Protection While Charging: This wireless car phone mount includes overheating protection, overcurrent protection, overvoltage protection, overpower protection, overcharge protection, short circuit protection and foreign body detection. Mpow Fast charging car mount intelligently manages the charging process and protects the phone.
• Note: 1. First of all, your cell phone should support wireless charging. It is a QI-certified cell phone. 2. In order to avoid the influence of phone case on wireless charging, we suggest removing phone case when charging. 3. If the size of the phone is too large, you can adjust the foot of the mount to move up and down, change the location of the phone, and finally achieve wireless charging.

User questions & answers

Question:	does it work with lg g
Answer:	Yes, this can be used to film as you drive. I have attached both my Samsung cell phone and my cam corder to the device an it has worked fine. I'm an investigator so it's important I have equipment that works for my needs, and this mount has worked great. I have 3 in my car. It's really a matter of having the right app on your cell, so you get the best quality filming.

Product features

Silicone padded cradle

Tightly hold the phone, anti-sliding and anti-scratching

360° Rotatable Ball Head

Adjust the angle and find the perfect view for watching

Package Contents

Product description

Product Description

What if You Have a Mpow 3-in-1 Car Phone Mount?

Own a dashboard mount + windshield mount + air vent mount

Own a car phone mount for safe and hassle-free driving

Own a desk phone holder for videoing, chatting and watching movies

Own a wall phone mount for timing and reminding

This is a phone holder for more situations than a single car holder.

Tips for dashboard mount

1. Remember to lock the gel pad after setting

2. Wash the gel pad and air dry after long time of use to regain stickiness

Tips for windshield mount

1. Clean the windshield before installation

2. The windshield suction cup only fits smooth surfaces like glass or tile

Tips for air vent mount

1. The air vent claw only fits horizontal or vertical vents

2. Crossed claw with 2 levels of tightness for different blades

Specification

Name: 3-in-1 Car Mount

Color: Black

Cradle Length: 58-100mm/2.3-4.0in

Gooseneck Length: 105mm/4.1in

Air Vent Claw Length: 22mm/0.9in

Package Contents

Cradle ×1

Air Vent Holder ×1

Windshield Holder ×1

Dashboard Holder ×1

• Mpow 3-in-1 Car Mount: Combining functions of dashboard mount, windshield mount and air vent mount together, Mpow 3-in-1 phone holder is applicable in more conditions than an ordinary car phone mount.
• Steadier and Safer: The lengthened and crossed air vent claw with 2 levels of tightness is suitable for both thick and thin blades. The sticky dashboard gel pad leaves no air gap in the cup after locking onto the dashboard, washing to regain stickiness after long time of use.
• No Scratch to Your Beloved Phone and Car: Both the cradle and the air vent claw are silicone-padded in order to increase stability and cause no scratch to the phone and air vent blade.
• Great Spot for Driver: Mpow car cradle offers a close site for the driver to easily watch and operate the phone. No need to hold the phone when navigating or having a call. Rotate the cradle to get the fine angle to watch.
• hand - press the release button to open the clamp and set the phone. Clamp length: 58-100mm/2.3-4.0in, widely compatible with models like iPhone 12 11 Pro MAX/XS MAX/XS/XR/8/7, Samsung Galaxy S10/S9/S8/S7/S6, Note 9/8/7, LG V30/20/10

Product description

Kindly Note:

1. Not recommended to install the car phone mount on too rough or curved dashboard surfaces.

2. Peel the protective film from the suction cup bottom before use.

3. The preferable installation area for the stabilizer base should be close to the phone holder for maximum stability.

4. Let it sit for 24H after installation.

• FREE INSTALLATION & UNOBSTRUCTED SIGHT: Mpow focuses on the innovative and smarter mounting solution and blazes past other traditional dashboard car mounts. Up to 15cm/5.9in aluminum long gooseneck sends the dashboard Phone mount much closer to you without blocking your sight, giving you the freedom to position it on multiple locations on the dashboard or windshield. Most importantly, it can be bent to avoid obstructing display and irregular vents
• STRONG SUCTION CUP WITH STICKY GEL: super strong vacuum suction cup features a layer of sticky gel and a locking lever which can maximize the stability and keep the mount in place. Comes with an anti-shake stabilizer, it safely hold the device without vibrating and wobbling even on rough roads. The suction cup is reusable and washable, Simply rinse in water and let air dry to restore the stickiness.
• HOLDS PHONE AND CASE COMBINATIONS: the adjustable side clamps extend from 1.8in to 3.7in, compatible with most smartphones with screens up to 6.5” and even worn its case. (Galaxy S10/S9/S8/S7/S6/J5/J3/A5/A6/A7, Huawei P20/Mate10/Mate20/honor 8X, iPhone 11 Pro/ 11 Pro Max/ X/XS/XR/8Plus/8/7Plus/7/6Plus/6S/6, Sony Xperia Xz3/Xperia Xz2/Xperia Xz2 compact, Xiaomi Redmi Note 6 Pro/Redmi Note 5 Pro/Redmi Note 5/mi 8 Pro/mi 8/Mi8 Lite/mi A2/MI A2 Lite/mi A1, LG G5/G6/V30/V20 und MP3 )
• VIEW YOUR PHONE AT ANY ANGLE: The flexible and durable gooseneck can be bent to the shape you like, allowing for flexible adjustment for easy positioning and access to device controls. Thanks to the 360 degrees ball-head, the dashboard mount can be flexibly tuned to display at an optimal viewing angle, either in landscape or portrait mode for convenient navigating, calling, and music in the vehicle
• BUILT TO LAST AND PROTECT: the polished surface makes the mount look sleek in your car. The heat-resistant PC and ABS materials make Mpow dashboard Phone holder sturdier than other Pure ABS mounts. The foldable holding feet allow hassle-free charging on the go. The Sponge-Padded surface and grips of the cradle prevent slipping and scratches. Note: Please avoid the car mount if you use a pop grip. It cannot hold phones with your Pop Mount/Pop out stand/expanding stands

Product features

MPOW Universal Dashboard Car Phone Mount

The quick-release button allows you to release and install your phone with one hand motion in seconds.

The side arms expand up to 94mm/3.7in wide, fits most phones such as:

Reusable & Washable Sticky Gel

The car mount’s suction cup has a coating of sticky gel that prevents air gaps from forming. To renew the gel adhesive, just rinse with water and let air dry

Assemble the Car Mount

• Step 1. Unscrew the knob;
• Step 2. Pass the knob through the ball head;
• Step 3. Tightly push the ball head into the socket of the cradle, then tighten the knob.

Package Contents

• 1 x Car Phone Holder
• 1 x Suction Cup Base
• 1 x Anti-shake Stabilizer
• 1 x Manual
• 2 x Spare Sticky Adhesives for Stabilizer

Product description

Wide Compatibility

iPhone: 11 Pro Max / 11 Pro / 11 / Xs / Xs Max / XR / X / 8 Plus / 8 / 7 Plus / 7 / 6s Plus / 6s / 6 Plus / 6 / SE / 5s / 5c / 5/J7/J6/J5/J3;

Galaxy: Note 10/ Note 10+/ S10 / S10+/ Note 9 / S9+ / S9 / Note 8 / Note 5 / S8+ / S8 / S7 / S7 Edge / S6+ / S6 / S5;

Google: Pixel 4 XL/4/ 3 XL / 3/ 2XL/ 2/ XL/ Pixel, Nexus 6P/ Nexus 5x;

LG: G7/ G6/ G6 Plus/ V30/ V30 Plus/ V20;

Xiaomi: Redmi Note 8/ Note8 Pro/ Note 7

One Plus: 7T/ 7T Pro/ 7 Pro/ 7/6T

Motorola: P50/ P30/ G7/ G7 Plus/ G7 Power/ G6

Huawei: P30/P30 Pro/P20/Mate 20 Pro/P20 Lite/P10/P9/Nova/Honor 10；

Sony, HTC, Nokia, Motorola, Blackberry and more smartphones



Warm Prompts

1. Make sure there is a CD slot in your car before purchase.

2. Not suitable for ultra-wide, closed-type, or irregular CD slots.

3. It is recommended to remove the thick/bulky phone stand holder on the back of the phone/case.

4. When inserting or ejecting a CD, you have to remove the CD slot phone holder first.

• CONVENIENT FOR GPS NAVIGATION AND CALL- MPOW car phone mounts are essential to keep car drivers safe on the road by allowing drivers to keep both hands on the wheel and keep an eye on GPS navigation. The cell phone car mounts reduce the likelihood of accidents that can harm you and your passengers.
• PHONE COMPATIBILITY-The arms extend from 1. 8in. /4. 5cm to 3. 8in. /10cm. The 0. 6in. (1. 5cm) deep arms work well to hold models from 4. 7’’~6. 8’’, even with a thin case on, including but not limited to the new iPhone 12/12Mini/12Pro/12Pro Max/11 Pro Max/11 Pro/11/Xs Max/XR/XS/X/8 Plus/8/7 Plus/7; Galaxy Note10+/Note10/S10/S10e/S10+/S9+/S9/Note 9/Note 8/S8; Pixel/Nexus; LG; OnePlus; Xiaomi; Moto and more.
• CD SLOT MOUNTS-Does your car CD player go unused? Make it functional again with MPOW phone holder. The base slips into your CD slot; then, it expands and locks into place, so your phone is always safe and stable. NOTE: Flip over to install for wider compatibility with different cars.
• THREE SIDES GRIP DESIGN- MPOW car phone mount has three side grips to hold your device in place. A little button along the sides can be pushed which prompts the phone to pop out of the mount. What’s more, you get a 360-degree rotation for great viewing angles.
• FITS 99% OF THE CD SLOTS: The car mount base won’t damage your CD slot, and can have its width customized for a secure fit by turning the knob, making the CD slot mount suitable for most vehicles with a standard CD player. You can still listen to CDs with the mount installed.

Product features

Foldable Supporting Feet

In the bottom of the clamp, you can see two supporting feet, which is designed as foldable for various situations. The distance between the feet is widened to 1.8 inches, allowing a convenient access to charging port and home button.

Reliable Mount Stability

To ensure the maximum security of your phone and the stability of the phone holder, there are 3 anti-skid rubber pads come with the phone mount. Please make sure of sticking the rubber pads on the CD connector before using it.

Compatible with More Cars

Thanks to the 360° rotatable ball joint, not only the clamp but also the base are rotatable. Some cars have the screen or buttons above the CD player, others have them below the CD slot. You can install either side up or down to fit your car.

• Ultra Sticky Suction Pad:Firm suction pad sticks tightly on the dashboard or most surfaces. Remove easily by pulling the suction pad without leaving any nasty mark on your dash.(NOTE:We DO NOT recommend to apply the dashboard car mount on leather, wall or filmed glass surfaces as the suction cup is designed with strong viscosity and attraction)
• Extendable Arm:Telescopic arm can extend from 4.6in to 6.6in and pivot up or down for optimal viewing height. Prevent from blocking your view while driving.
• 360°Rotations:Swivel ball head ensures 360° free rotations to your desired viewing angle. Quick to adjust for a safe and effortless drive. As summer approaches and days are getting hotter, please avoid direct exposure to the sun as this may affect the function of your car mount
• Flexible Arm Lock: Simply press the button to adjust arm width that ranges from 1.6-3.5in (4-8.8cm). Our car mount holder is compatible with most smart phones up to 6 inches.
• All-Around Protection:There are sponge cushions on the car phone mount for secure and wobble-free fit for your cell phone. Foldable holding feet allow hassle-free charging for your cellphone. Note: Please avoid the car mount if you use a pop grip. It cannot hold phones with your Pop Mount/Pop out stand/expanding stands.

Product features

Broad Compatibility

Works with most smartphones and cases. The arms present a firm grip to hold the latest iPhone series, Galaxy series, phones from Motorola, Sony, and any other mobile phone brands with width in a range of 1.8in/4.5cm and 3.7in/9.3cm.

Sticky Suction Cup

The suction cup has a coating of sticky gel that prevents air gaps and ensures a secure hold on the dashboard, windshield, or desktop. Note: Works on smooth and flat surfaces. Do not attach it to the windshield in hot summer.

Anti-fall Adjusting Knob

You can easily adjust the length of the arm by turning the knob, and customize the distance between your phone and you as needed. The knob has been upgraded and uses an anti-fall design, it will not fall off during the adjustment process.

Anti-skid and Anti-scratch

There are sponge pads on the arms, bottom feet and surface, which can protect your device from being scratched. Also. The cushioned car mount absorbs the vibration during bumps, and holds the phone securely in place.

Rinse and Reuse

If the sticky suction cup gets dirty or loses its stickiness, simply rinse it with water and let it air dry, it will stick like new. You can easily remove the car phone mount holder from vehicle to vehicle and re-attach it as you want.

Warm Prompt

The total thickness of the combination of phone and phone case should not exceed 13mm/0.5in. To ensure a firm grip, please remove the ultra-thick phone case, pop grip, and phone ring holder when using this car phone holder.

Product description

Quick release button: press button on back of unit to slide open and then take out mobile phone. Press the arms on both side to clamp mobile phone again, simple of operation, save time and power.360 degree rotation: The fully 360-degree rotation provide you with the best viewing angle.The holder ensures safe driving whether you are talking, navigating, listening to music or charging oad compatibility: passed a wide range of tests, fit for most cellphones, iPhone 7 7 Plus iPhone 6S Plus, 6S, 5S, 5C, Samsung Galaxy S6, HTC, LG, Nexus, Nokia, GPS Device. Sturdy, cradle-less and attractive device holding system.Suitable for width size from 1.9 inch to 3.7inch smart phone or electronic devices.1 year warranty. Not compatible with the pixel 5 Smartphone. Car mount, car mounts, cell phone holder, cell phone holders, car phone mount, car phone mounts, car holder, car holders, cell phone Car Mount, cell phone Car mounts, phone mount for CAR, phone mount for cars, phone mount, phone mounts, phone holder for car, phone Holder for cars, car phone Holder, car phone holders, phone Car Mount, phone Car mounts, car mount for phone, Car Mount for phones, cell phone mount, cell phone mounts, mount

• Quick Release Button: Press button on back of unit to slide open and then take out mobile phone. Press the arms on both side to clamp mobile phone again, simple of operation, save time and power.
• 360 Degree Rotation: The fully 360-degree rotation provide you with the best viewing angle.The holder ensures safe driving whether you are talking, navigating, listening to music or charging.
• Broad Compatibility: Passed a wide range of tests, fit for most cellphones, iPhone 7 7 Plus iPhone 6s Plus, 6s, 5s, 5c ,Samsung Galaxy S6, HTC,LG, Nexus, Nokia, GPS Device. Sturdy, cradle-less and attractive device holding system.suitable for width size from 1.9 inch to 3.7inch smart phone or electronic devices.
• Single-handed Operation: Simple installation and removal of smart phones. Simplistic Installation, Single-handed Operation, No Tools Needed.
• This car phone mount holder is compatible with most all cell phone devices

User questions & answers

Question:	the air vent directional controls on my 2010 Scion xB are thicker than most, anyone have experience with this fitting/not fitting
Answer:	I have a 2009 Saab 9-3 with air vents that form a grid pattern, this does not fit within the space of the grids, so I cannot use it.
Question:	Are those reviews really real ? seems so fake
Answer:	I dk what reviews are fake or real, but I do know this product works very well! There is a convenient release button on the back that springs open the sides and allows an easy removal of the phone, which (when squeezed) has a ratchet system to hug the phone when you are ready to use it again. The clamp that holds it to the vent is fully adjustable and the switch is easy to operate which locks it in place. I think you will be very pleased.
Question:	I have an otter box on my iphone 6s plus. Will the mount still fit
Answer:	I have an iPhone 8 plus with a Spigen Herringbone case and Ring holder on the back and have been using this holder for a year now with no issues. Yes, the phone does not fit perfectly in to the holder and does stick out but there is still enough grip from the sides and with it tilted up to my view point in my car, Mazda CX5, the phone has never fallen out. At least not yet. I have tried a LOT of holders and this has been the best one I have found to date. I am buying 2 right now for my parents. My dad was driving my car while I was out of the country last month and the holder mysteriously disappeared when I went to get the car back. :)
Question:	Will it hold a Galaxy S
Answer:	It can hold S8 but not Note8 or Note9 (Note series are too heavy). Even with S8, overtime it will just get loose.. We had to put in a plastic piece to make it clam stronger on the air vent. Personally I think the design can be improved

Product features

Universal Design to Accommodate Most Any Cell Phone

Designed to hold any phone size between 1.9 inches to 3.7 inches wide. Simply press the button on the back to open the sides of the mount to fit your size phone. Close the sides to secure your phone in the mount.

Clips to your air vent and keeps your windshield clear of any obstructed view.

Superior in Quality

Made to withstand any condition, hot or cold. Designed to secure your phone on smooth roads and bumpy roads. Made with high quality materials to withstand everyday use.

Soft padded interior to protect your phone while in the mount. Tough Plastic exterior to withstand rough conditions.

Ease of Use Design

360 Degree Rotation, a one-click release button, and adjustable side grips to accommodate your size device from 1.9 to 3.7 inches wide.

Quick Release Button

Press the button on the back of the mount to quickly release your phone from the mount and to expand the sides for use with larger phones

Eye Level Safe Viewing

Keep your windshield clear of obstructions with this mount. Create a safe, eye level viewing of your device while mounted.

Use for Horizontal or Vertical Vents

This mount performs best on horizontal and vertical vents only. It is not advised to use this product on circular vents.

Installation Instrustions

1. Hold the car mount with your hands and unscrew the lock washer on the back. (Do not throw away this washer) Place circular ball on lever through lock washer.

2. Insert the ball into the slot in the back of the mount.

3. Tighten the lock washer back onto the mount.

4. The unit is now assembled.

5. Use the bi-directional lever to clamp the mount to your air vent. One way will be tighter than the other.

6. Adjust your mount to the desired position and you are ready to go!

7. Simply open the sides with the button on the back of the mount and place your cell phone or device in the mount and close the sides to secure it. Then use the quick release button on the back to remove your device.

Product description

Strong Suction Cup



This TPU suction cup has been upgraded,thickened and enlarged to ensure more stable adsorption. Plus, the materialalso uses high-temperature resistant TPU, which is not easy to deform and falloff during long-term use.



Holds Your Phone Firmly



The side arms and bottom feet of themount are equipped with non-slip silicone pads, which can ensure that the phoneis kept in place at all times and there is no chance of slipping out, even ifyou drive over speed bumps or make sharp turns.



Washable and reusable



If you remove the dashboardcar phone holder andwant to reinstall it, or the suction cup gets dirty or loses its stickiness,just rinse it with warm water and let it air dry, and the suction cup willrestore its viscosity and stability.



Sleek and Stylish



When it comes to aesthetics andfunctionality, this dashboard phone holder for car is the top pick. The polished mirrorsurface makes the car mount look elegant and fit perfectly well in yourvehicle.



Kindly Note



1. Wipe dry and clean the windshieldbefore installation.



2. Not recommended to install the suctioncup on curved/rough/uneven/dirty surfaces.



3. Before use. please peel off theprotective film from the suction cup



4. After installation, push the leverdown to lock the suction cup



5. When removing the suction cup, pleaseunlock the lock lever first, and then pull up the small tab. Do not pull itdirectly.



Package Included



1 x Phone Mount for Car



1 x Suction Cup Base



1 x User Manual

• Unobstructed Vision, Safe Driving: Curving from the top of the dashboard down, this dashboard car phone mount holder allows you to view your phone without worrying about blockage to your sight of the road, so you can drive home safely.
• Powerful Suction Cup: The suction cup has a coating of sticky gel that prevents air gaps from forming. This way, the dashboard mount stays in place even as you drive over bumpy roads. If the gel loses its grip, just rinse it with water and let it air dry to stick like new
• Fits Most Phones and Cases: Holds phones with 4.0-6.9" displays and up to 103mm/4.1in wide, even with an otterbox case, including but not limited to iPhone 12 SE 2020/11/11 Pro/11 Pro Max/XS/XR; Galaxy Note 20/Note 20 Ultra/S20 Ultra/S20+/S20.
• No Angle Limit: The arm can be adjusted 140° through the security lock instead of the adjusting knob, which allows fast operation and anti-shake protection. The dashboard phone mount also features a swivel ball that provides 360-degree viewing angles.
• Dual Release Button & Adjustable Feet: The car phone holder has 2 release buttons for easy operation with left and right hands. The feet at the bottom are designed to be adjustable to hold phone models of various sizes and enhance stability

User questions & answers

Question:	How does the mount perform when the car is running through bumpy road
Answer:	This goes on the back of a car headrest. Not meant for a bike.
Question:	I put the suction part too close to the gearshift, how do I take it off and readjust it
Answer:	Yes, these will fit most ALL vehicle cup holders.
Question:	Does the unit leave marks on the dashboard
Answer:	These are standard size coasters for car cup holders. They should fit. Measure the circumference of the opening of the car’s cup holder.
Question:	Can you charge your phone while it’s being held
Answer:	They should!

Product features

Unobstructed Side Buttons

The telescopic bottom feet are designed for smartphones ranging from standard sizes to plus sizes, thereby avoiding blocking the phone's volume/power button. Besides, stability can be optimized by adjusting the feet.

Case-friendly Design

The clamps of the cell phone holder are compatible with various phone cases, such as otterbox cases, wallet cases, leather cases and most phone cases. Note: The total thickness of the phone and the case should be less than 15mm (0.6in)

All-Around Protection

There are silicone cushions on the side arms and bottom feet, which can keep your phone stable and secure. You don’t have to worry about your phone falling out whenever you are driving across uneven roads.

Unique Safety Lock

Featuring a quick flip lock instead of adjusting knob, which not only saves time and effort, but also minimizes the vibration of the gooseneck while driving, so that the suction cup can hold more firmly

140° Adjustable Arm

The arm can pivot up or down for 140 degrees for a variety of viewing angles, which allows you to readily see and reach the screen, and keep your phone at a comfortable position while you drive

Landscape or Portrait Mode

The mount can be flexibly tuned to display at an optimal viewing angle, either in landscape or portrait mode. It’s much easier and safer for you to get directions, play music, or take phone calls.