14 best holder mounts for iphones

• 3 in 1 Universal Car Mount: VICSEED car cell phone holder made with airliner PTFE material, can be universally mounted to your dashboard, windshield or vent to meet your demand at your convenience and requirements. Good choice to most of the cars, pickup trucks, SUV, trucks, taxis; good assistant for Uber, Lyft drivers.
• Perfect Protection: Say goodbye to the easy-scratched plastic panel car mount. VICSEED Upgrade 3 in 1 mobile phone holder for car adds a high-density silicone material with excellent resilience. The car phone holder is covered in a thick layer of silicone that will ensure your mobile device is safe from wear and tear. The unprecedented design makes leaves zero scratches on mobile devices.
• Secure Stable Install: The VICSEED car cell phone mount features an extra strong suction cup with super sticky gel pad. It easily sticks securely on the dashboard or most flat surfaces. Remove the car vent phone mount easily by pulling the suction pad without leaving any nasty marks. (Note: use warm water to wash the car holder's suction cup if the surfaces are dirty or it can not stick well, then let it air dry.)
• Long Arm Design & Multiple Viewing Angle: The car mount for iPhone 11 has a telescopic arm that extends from 4.84" - 9.05" and can pivot up or down for a variety of angles which optimizes viewing capabilities. This car holder for cell phone has a highly flexible ball-joint 360° rotation that provides infinite viewing angles. Position your phone at the perfect angle to enjoy a more relaxed and safer drive.
• One-Hand Operation: The car mobile phone holder also features a One-button release system that enables you to lock or release your phone with just one hand operation.Fit well for all mobile phones between 4''-7''in width and most thick case.

Product features

Reusable Suction Cup Car Phone Holder Mount

• We off the extra dashboard pad, provides smooth surface. So the car holder can stay more firmly and securely.
• Use warm water to wash the car holder's suction cup if the surfaces are dirty or it can not stick well, then let it air dry.After that, and the car mount will work like new one.

Compatible Devices

iPhone 11 / 11 Pro / 11 Pro Max / XS / XR / XS Max / X / 8 / 8 Plus / 7 / 7 Plus / SE / 6s / 6 Plus / 6 / SE / 5s / 5 / 4s / 4

Samsung Galaxy S20 / S20+ / S20 Ultra 5G / Note10 / Note10+ / S10 / S10+ / S10E / S9 / S9+ / S8 / S8+ / Note 8 S7 / S7 Edge / S6 S6 Edge / S5 / S4 /A70s / A20s / M30s / M10s / A90 5G / A30s / A50s

LG V50S ThinQ 5G / G8X ThinQ / Q70 / K30(2019) / K20(2019) / K40S / K50S / W30 Pro / W30 / W10 / Stylo 5 / V50 ThinQ 5G / G8S ThinQ / G8 ThinQ / Q60 / K50 / K40 / Q9 / V40 ThinQ

Google Pixel 4 XL / 4 / 3a XL / 3a / 3 XL / 3 / 2 / 2 XL / XL / Pixel

Nexus OnePlus 3 / 2 / X; Blackberry Q10 / Z10; Sony; Nokia; XiaoM; Huawei and all phones.

What's in Box

• 1xSuction cup base
• 1xCar Air Vent Clip
• 1x Car Phone Holder
• 1xUser Guide

Product description

Kindly Note:

1. Not recommended to install the car phone mount on too rough or curved dashboard surfaces.

2. Peel the protective film from the suction cup bottom before use.

3. The preferable installation area for the stabilizer base should be close to the phone holder for maximum stability.

4. Let it sit for 24H after installation.

• FREE INSTALLATION & UNOBSTRUCTED SIGHT: Mpow focuses on the innovative and smarter mounting solution and blazes past other traditional dashboard car mounts. Up to 15cm/5.9in aluminum long gooseneck sends the dashboard Phone mount much closer to you without blocking your sight, giving you the freedom to position it on multiple locations on the dashboard or windshield. Most importantly, it can be bent to avoid obstructing display and irregular vents
• STRONG SUCTION CUP WITH STICKY GEL: super strong vacuum suction cup features a layer of sticky gel and a locking lever which can maximize the stability and keep the mount in place. Comes with an anti-shake stabilizer, it safely hold the device without vibrating and wobbling even on rough roads. The suction cup is reusable and washable, Simply rinse in water and let air dry to restore the stickiness.
• HOLDS PHONE AND CASE COMBINATIONS: the adjustable side clamps extend from 1.8in to 3.7in, compatible with most smartphones with screens up to 6.5” and even worn its case. (Galaxy S10/S9/S8/S7/S6/J5/J3/A5/A6/A7, Huawei P20/Mate10/Mate20/honor 8X, iPhone 11 Pro/ 11 Pro Max/ X/XS/XR/8Plus/8/7Plus/7/6Plus/6S/6, Sony Xperia Xz3/Xperia Xz2/Xperia Xz2 compact, Xiaomi Redmi Note 6 Pro/Redmi Note 5 Pro/Redmi Note 5/mi 8 Pro/mi 8/Mi8 Lite/mi A2/MI A2 Lite/mi A1, LG G5/G6/V30/V20 und MP3 )
• VIEW YOUR PHONE AT ANY ANGLE: The flexible and durable gooseneck can be bent to the shape you like, allowing for flexible adjustment for easy positioning and access to device controls. Thanks to the 360 degrees ball-head, the dashboard mount can be flexibly tuned to display at an optimal viewing angle, either in landscape or portrait mode for convenient navigating, calling, and music in the vehicle
• BUILT TO LAST AND PROTECT: the polished surface makes the mount look sleek in your car. The heat-resistant PC and ABS materials make Mpow dashboard Phone holder sturdier than other Pure ABS mounts. The foldable holding feet allow hassle-free charging on the go. The Sponge-Padded surface and grips of the cradle prevent slipping and scratches. Note: Please avoid the car mount if you use a pop grip. It cannot hold phones with your Pop Mount/Pop out stand/expanding stands

Product features

MPOW Universal Dashboard Car Phone Mount

The quick-release button allows you to release and install your phone with one hand motion in seconds.

The side arms expand up to 94mm/3.7in wide, fits most phones such as:

Reusable & Washable Sticky Gel

The car mount’s suction cup has a coating of sticky gel that prevents air gaps from forming. To renew the gel adhesive, just rinse with water and let air dry

Assemble the Car Mount

• Step 1. Unscrew the knob;
• Step 2. Pass the knob through the ball head;
• Step 3. Tightly push the ball head into the socket of the cradle, then tighten the knob.

Package Contents

• 1 x Car Phone Holder
• 1 x Suction Cup Base
• 1 x Anti-shake Stabilizer
• 1 x Manual
• 2 x Spare Sticky Adhesives for Stabilizer

• 【One Car Holder For Multiple Purposes】This clip car mount more convenient, can be used in car dashboard, sun visor, rearview mirror. Multiple purposes can provide you with more convenience and more use needs in the car.
• 【360°Rotation & 180°Tilt】The upgrade car phone mount not only support 360-degree rotatable switch between horizontal and vertical screens at your will, but also can be 180° tilt will provide you with the best viewing angle, , so you could see the phone screen clearly and keep secure driving rather than limited by view angle.
• 【Curved Base Design】Made with a soft, non-slip silicon pad and curved base. The phone holder can be attached to the car dashboard or curved surface and firmly hold your device to prevent them from scratching and dropping. Spring buckle base cannot be shaken off, strong and sturdy.
• 【Folding Car Bracket】When not in use the car phone stand can folds flat and easily fits in a center console, glove box, or door pocket to keep it out of the way, but make you conveniently in reach when you need it.
• 【Broad Compatibility】Designed with a spring buckle, which can be adjusted to fit mobile phones from 4 to 6.8 inches, Compatible with iPhone 12 11 pro/11 pro max/XS/XR/X/8/7,Galaxy, Moto and More other smartphone.

Product description

The iOttie Easy One Touch 4 Dashboard & Windshield Mount is a universal smartphone solution that is engineered to safely enhance your driving experience. U.S. patent protected, the one of a kind easy one touch mechanism allows you to easily mount and remove your smartphone with one simple hand motion. Utilize the increased range, strength, and stability of the telescopic arm to find the perfect position for your smartphone on either dashboard or windshield. Securely mount on your dashboard, windshield, or desk with iOttie’s super strong suction cup. The easy one touch dashboard and windshield mount is universally compatible with all smartphones sizes to hold your device securely so you can drive safely.

• Easy One Touch Lock/Release: Patented easy one touch mechanism allows quick one hand open and close operation
• Adjustable Viewing: The newly re-designed telescopic arm extends from 4 – 6.5 inch and pivots on 225 degree arc for a variety of optimal positions
• Universal Mounting: Holds all phone and case combinations from 2.3 Inches 3.5 Inches
• STRONG SUCTION: One time use dashboard disc and reusable suction cup combo offers superior stick strength
• Bottom Foot: Foot on the bottom of mount cradle can be adjusted side to side, up and down, or removed to hold smartphones and cases of all sizes

User questions & answers

Question:	Will it hold the iPhone 5S
Answer:	Yes it should. The iPhone 5 is listed at 2.31 inches wide and this mount is listed as supporting phones from 2.3 inches wide so it should fit fine. There are two small feet at the bottom of the mount to keep your phone from sliding through as well. It is a very nice phone mount, one of the best I've ever used in a decade. The suction pad holds extremely well and fastens to the front plate of a pro-clip nicely for a great pro installation.
Question:	Does anyone even bother to read the previous questions before adding another one that has been asked 6 times already
Answer:	So many of these reviews are paid/fake endorsements. Click the reviewer and read their other reviews. So sad reviews are becoming useless. Read the 1 and 2 star reviews from real people.
Question:	Will it work with a thick phone case
Answer:	I have an otter case and a pop socket and it’s too thick for it to stay on. Had to return. Without the pop socket it’d be a fantastic product that’d hold my phone.
Question:	Is this worth the full $25? Does the sticky stuff hold well for a heavy Iphone X
Answer:	Bought this for my daughter January 2017. (Wisconsin). She loves it. However it broke after 18 months. She wants another and I’ll be ordering the newest version for her. She uses it with an iPhone 8 Plus with a case that holds 4-5 credit card-type cards. So it’s bulky, yet I t held the phone securely. So I think it is worth $25. I’m hoping that whatever broke has been improved. But even if it didn’t, if it lasts another 18 months she’ll be happy. She has a 2016 CRV and she placed the pad on the flat surface in front of the secondary screen.

Product features

Easy One Touch Lock & Release

The one of a kind Easy One Touch mechanism allows you to easily mount and remove your smartphone with one simple hand motion. This product or its use may be covered by U.S. Patents: 8,627,953

Mount Foot

Foot on the bottom of Mount Cradle can be adjusted side-to-side, up and down, or removed to hold smartphones and cases of all sizes.

Suction Cup

Suction Cup can be restored by simply rinsing under warm water and air drying.

Exploring

Learn the names of each part included on the Easy One Touch 4 Car Mount.

Compatibility

Universally holds all phone and case combinations from 2.3” -3.5'” includes Easy One Touch mount locks and release system.

DriveSmarter App

Download the iOttie DriveSmarter app with a GPS location system to help you find the location of where you last parked.

Windshield Mounting

Landscape Orientation

Desk Mounting

• Ultra Sticky Suction Pad:Firm suction pad sticks tightly on the dashboard or most surfaces. Remove easily by pulling the suction pad without leaving any nasty mark on your dash.(NOTE:We DO NOT recommend to apply the dashboard car mount on leather, wall or filmed glass surfaces as the suction cup is designed with strong viscosity and attraction)
• Extendable Arm:Telescopic arm can extend from 4.6in to 6.6in and pivot up or down for optimal viewing height. Prevent from blocking your view while driving.
• 360°Rotations:Swivel ball head ensures 360° free rotations to your desired viewing angle. Quick to adjust for a safe and effortless drive. As summer approaches and days are getting hotter, please avoid direct exposure to the sun as this may affect the function of your car mount
• Flexible Arm Lock: Simply press the button to adjust arm width that ranges from 1.6-3.5in (4-8.8cm). Our car mount holder is compatible with most smart phones up to 6 inches.
• All-Around Protection:There are sponge cushions on the car phone mount for secure and wobble-free fit for your cell phone. Foldable holding feet allow hassle-free charging for your cellphone. Note: Please avoid the car mount if you use a pop grip. It cannot hold phones with your Pop Mount/Pop out stand/expanding stands.

Product features

Broad Compatibility

Works with most smartphones and cases. The arms present a firm grip to hold the latest iPhone series, Galaxy series, phones from Motorola, Sony, and any other mobile phone brands with width in a range of 1.8in/4.5cm and 3.7in/9.3cm.

Sticky Suction Cup

The suction cup has a coating of sticky gel that prevents air gaps and ensures a secure hold on the dashboard, windshield, or desktop. Note: Works on smooth and flat surfaces. Do not attach it to the windshield in hot summer.

Anti-fall Adjusting Knob

You can easily adjust the length of the arm by turning the knob, and customize the distance between your phone and you as needed. The knob has been upgraded and uses an anti-fall design, it will not fall off during the adjustment process.

Anti-skid and Anti-scratch

There are sponge pads on the arms, bottom feet and surface, which can protect your device from being scratched. Also. The cushioned car mount absorbs the vibration during bumps, and holds the phone securely in place.

Rinse and Reuse

If the sticky suction cup gets dirty or loses its stickiness, simply rinse it with water and let it air dry, it will stick like new. You can easily remove the car phone mount holder from vehicle to vehicle and re-attach it as you want.

Warm Prompt

The total thickness of the combination of phone and phone case should not exceed 13mm/0.5in. To ensure a firm grip, please remove the ultra-thick phone case, pop grip, and phone ring holder when using this car phone holder.

Product description

The main advantages of the windshield car phone holder:



1. Washable suction cup: When the suction cup is covered with dust and affects the adsorption performance, you can restore the adsorption performance by washing with water



2. High-quality gooseneck: the gooseneck is 9 inches long and can be bent to adjust the viewing angle



3. Ball joint design: You can adjust the viewing angle by rotating the ball head, and then tighten the nut to fix it



4. One-click release button: the clamp arm can be opened by pressing the side button, and the clamp arm can be extended to 3.7 inches, which is compatible with large-size mobile phones



5. Sponge pad protection: we attach a sponge pad inside the car phone holder to protect the phone



6. Foldable car phone holder feet: If you want to place the phone horizontally, you can fold up the car phone holder feet, so that you can adjust the phone left and right to change the center of gravity and better hold the phone

• High Quality Aluminum Gooseneck: The aluminum gooseneck of the high-quality car phone holder is 9 inches long. You can adjust the viewing angle by bending the gooseneck. We have included a stabilizing device in the package to fix the gooseneck to prevent shaking
• Upgrading the Suction Cup of Car Phone Holder: We upgraded the material of the suction cup of the car phone mount from PVC to TPU, thereby greatly improving the heat resistance and stability of the suction cup, at the same time, we increase the hardness of TPU from 70 to 75, so that the suction cup is not easy to deform
• Washable Suction Cup: When the suction cup is covered with dust and affects the adsorption performance, you can restore the adsorption performance by washing with water
• Compatible with 4-6.9 inch Mobile Phones: You can press the button on the left to open the clamp arm. The clamp arm can be extended to 3.7 inches to hold larger phones. With a powerful suction cup, you can easily hold 4-6.9 inch phones, such as iPhone 11 Pro Max , Xs Max, Xr, X/8/7/6 Plus etc
• Flexible Adjustment of Viewing Angle：You can adjust the viewing angle of the car phone holder in two places, one is to bend the gooseneck, the other is to rotate the ball joint, the ball joint can rotate 360 degrees, and finally tighten the nut to fix the position.

Product features

MPOW Windshield Long Arm Car Phone Mount

• Fits any cellphones with screen between 4.0’’ & 6.5’’ perfectly even with protective cases (Case should be within 5mm). Save your trouble of taking off the phone case.
• Made of high-quality aluminum, the long flexible arm makes the device closer to your sight for more comfortable and safer driving. The car mount will not block your view whilst driving as you can adjust it to any desired angle.

Not Only Works in Car

You can not only use it in your car for holding phone but also at your office or at home for Facetime with others, hands-free call, and watching movie, etc

Upgraded Strong Suction Cup

Upgraded to TPU material, now the strong suction cup has better heatproof performance and more stable installation even during hot Summer. Simply toggle the switch up/down to install/uninstall the long arm

Washable & Reusable

When the suction cup become non-sticky and dirty, you can rinse it with water then air dry. By doing so, it will adsorb tighter to the windshield or other smooth surfaces.

Product description

Wide Compatibility

iPhone: 11 Pro Max / 11 Pro / 11 / Xs / Xs Max / XR / X / 8 Plus / 8 / 7 Plus / 7 / 6s Plus / 6s / 6 Plus / 6 / SE / 5s / 5c / 5/J7/J6/J5/J3;

Galaxy: Note 10/ Note 10+/ S10 / S10+/ Note 9 / S9+ / S9 / Note 8 / Note 5 / S8+ / S8 / S7 / S7 Edge / S6+ / S6 / S5;

Google: Pixel 4 XL/4/ 3 XL / 3/ 2XL/ 2/ XL/ Pixel, Nexus 6P/ Nexus 5x;

LG: G7/ G6/ G6 Plus/ V30/ V30 Plus/ V20;

Xiaomi: Redmi Note 8/ Note8 Pro/ Note 7

One Plus: 7T/ 7T Pro/ 7 Pro/ 7/6T

Motorola: P50/ P30/ G7/ G7 Plus/ G7 Power/ G6

Huawei: P30/P30 Pro/P20/Mate 20 Pro/P20 Lite/P10/P9/Nova/Honor 10；

Sony, HTC, Nokia, Motorola, Blackberry and more smartphones



Warm Prompts

1. Make sure there is a CD slot in your car before purchase.

2. Not suitable for ultra-wide, closed-type, or irregular CD slots.

3. It is recommended to remove the thick/bulky phone stand holder on the back of the phone/case.

4. When inserting or ejecting a CD, you have to remove the CD slot phone holder first.

• CONVENIENT FOR GPS NAVIGATION AND CALL- MPOW car phone mounts are essential to keep car drivers safe on the road by allowing drivers to keep both hands on the wheel and keep an eye on GPS navigation. The cell phone car mounts reduce the likelihood of accidents that can harm you and your passengers.
• PHONE COMPATIBILITY-The arms extend from 1. 8in. /4. 5cm to 3. 8in. /10cm. The 0. 6in. (1. 5cm) deep arms work well to hold models from 4. 7’’~6. 8’’, even with a thin case on, including but not limited to the new iPhone 12/12Mini/12Pro/12Pro Max/11 Pro Max/11 Pro/11/Xs Max/XR/XS/X/8 Plus/8/7 Plus/7; Galaxy Note10+/Note10/S10/S10e/S10+/S9+/S9/Note 9/Note 8/S8; Pixel/Nexus; LG; OnePlus; Xiaomi; Moto and more.
• CD SLOT MOUNTS-Does your car CD player go unused? Make it functional again with MPOW phone holder. The base slips into your CD slot; then, it expands and locks into place, so your phone is always safe and stable. NOTE: Flip over to install for wider compatibility with different cars.
• THREE SIDES GRIP DESIGN- MPOW car phone mount has three side grips to hold your device in place. A little button along the sides can be pushed which prompts the phone to pop out of the mount. What’s more, you get a 360-degree rotation for great viewing angles.
• FITS 99% OF THE CD SLOTS: The car mount base won’t damage your CD slot, and can have its width customized for a secure fit by turning the knob, making the CD slot mount suitable for most vehicles with a standard CD player. You can still listen to CDs with the mount installed.

Product features

Foldable Supporting Feet

In the bottom of the clamp, you can see two supporting feet, which is designed as foldable for various situations. The distance between the feet is widened to 1.8 inches, allowing a convenient access to charging port and home button.

Reliable Mount Stability

To ensure the maximum security of your phone and the stability of the phone holder, there are 3 anti-skid rubber pads come with the phone mount. Please make sure of sticking the rubber pads on the CD connector before using it.

Compatible with More Cars

Thanks to the 360° rotatable ball joint, not only the clamp but also the base are rotatable. Some cars have the screen or buttons above the CD player, others have them below the CD slot. You can install either side up or down to fit your car.

• 🏆[Upgrade More Adaptable Phone Holder]: More DEEPER phone holder (up to 0.9") with WIDER space (up to 4"). Featuring one-button release curved arm and extendable feet, they all with soft silicone pad. Let your phone without scratch first. Secondly, hold your phone securely without shaking or wobbling.
• 🏆[Unique Infinitely Adjustable Base]: UP to 4" diameter, after attached rubber extender. You could adjust different sizes to fit your various cup holders in car, truck, RV, boat, golf cart, etc. The most adaptable base with modern design knob, made with durable plastic. Just little twist, not like open bottle caps.
• 🏆[Flexible Adjustable Gooseneck]: Up to 8-inch long neck. You will get the best angle, the best position through adjusting the flexible gooseneck. The phone mount part can be rotated 360-degree. You could easily adjust the view you want, not just only vertical mode.
• 🏆[Drive Now Text Later] Safety first! Keep your hands on the steering wheel and your eyes on the road while conveniently using your phones GPS navigation and hands-free features. You will worth try it if you have a car. It is the most reassuring choice to give this as a holiday christmas gift to someone you care about.
• 🏆[Broad Compatibility]: Suitable for all types of 2.2” - 4” wide devices, such as iPhone 11 Pro/XS Mas/XR/8/7 Plus/6s, Samsung S10/S9+/S8 Plus/S7 Edge/Note9, Huawei, HTC, LG, MOTO, GPS, Google Pixel, Nexus, Nikia, etc. Note: You might not need to remove phone case, socket mount or something attached your phone when using this product. It will max support totally 0.8" thick device.

Product features

Easy to Install - Step 1

Hold the phone holder upright. Insert 4 pins from the gooseneck bracket into 4 holes in the back of the phone holder.

Easy to Install - Step 2

Push the bracket up until you feel it “click”.

Easy to Install - Step 3

Place base of phone holder assembly in the vehicle cup holder. Twist knob on top of base clockwise to tighten and counter clockwise to loosen.

Easy to Install - Step 4

Press the top button on the back of the phone holder to expand the clips. Position bottom clip on the bottom of the phone. Squeeze side clips to hold the phone.

Product description

Vansky 3-in-1 Car Phone Mount - 3 ways for your choose, whatever you want! Multi functional, Rotatable, Convenient, Steady3-in-1 Smart design Vansky car mount not only has the 3-in-1 usage in dashboard, windshield or air vent, but it is also equipped with 3 holders in one package: one holder one mount. Users can use three of them without any disassembly at the same time and can service multiple devices and vehicles for your needs. Features: Multifunctional, Convenient, Steady, Safety Over current and over voltage protection Full 360-degree adjustable rotation for optimal viewing angle Adjustable holder to view your device at any angle or orientation while driving Easy install- Easy one press button releases the device with just a push of a finger Compatible with most smartphones, GPS, pad, MP3/MP4 players, etc Package Included: 1 x Vansky Universal Bracket1 x Windshield Mount1 x Dashboard Mount1 x Air Vent Holder1 x User Manual: At Vansky, we stand strongly behind the craftsmanship of our products. That's why we them with 45 Days Money Back & One Year Hassle Free and provide Friendly, Easy-to-reach Support.

• ☑️ [3-In-1 Car Mount Solution] - Vansky car phone mount can be wall-mounted or clipped to your car's air vent / dashboard mount / windshield phone mount for convenience.
• ☑️ [Easy & Quick Installation] - No tools required. Easy one press button to releases the clamps on your phone with just a push of a finger.
• ☑️ [360 Rotation] - The 360 degree rotatable phone holder for car lets you find the perfect angle to view your smartphone at a quick glance.
• ☑️ [Strong Suction Cup] - Features strong suction cup that will hold your device steady so you can keep your focus on the road and your hands on the steering wheel.
• ☑️ [Compatibility] - The car mount can securely attach your smartphone between 3.5 inches and 7 inches. Extendable grip accommodates phone between 6.7-9.7cm width, not limited for iPhone 12 11 Pro X XR 7 6 6s Plus, Samsung series, LG series and others 3.5-7 inches smartphone and with soft padding, securely holds your device.

User questions & answers

Question:	Can a charging cable be used while phone is in the mount
Answer:	Yes, the two adjustable bars that hold the bottom of the phone are wide apart.
Question:	Will it accommodate the iPhone X
Answer:	I have the IPhone 8 Plus and only the main larger car mount piece that has the bendable arm and attaches to your windshield fits my phone (with & without cases on). The other 2 car mount attachments are to weak to hold it so it always will either tilt down or my phone just will fall off altogether. Not to mention the smaller wind shield attachment (the one without the bendable arm) my iPhone 8 Plus can’t even be used with it because the phone is too tall so it hits the windshield & dashboard causing it to just hang down so you can’t see your screen. I’ve attached pix in my review if you want to check it out.
Question:	The bottom supports dont seem to come out on mine? anyone else? am i missing somethihg?thanks
Answer:	It took me a second but they fold from the middle out. The hinge is on the out part and the hook is tucked into the middle. Once you figure that out it's easy.
Question:	How long is the flexible gooseneck, starting from the center of the base with it bent at 90 degrees? Thanks
Answer:	It's about 9". I left it in my RV so I don't have it here to measure. You can bend it 180 degrees if you wanted to. Very flexible.

Product features

Vansky 3-in-1 Car Phone Mount - 3 Ways for Your Choose, Whatever You Want

Our Vansky 3-in-1 Design phone holder for car offers you 3-way mounting, it can be wall-mounted or clipped to your car's air vent / dashboard mount / windshield phone mount for your needs. Vansky phone holder for car is multi functional, rotatable, convenient and steady. 360 Rotation fully adjustable with 360-degree rotation for quick portrait and landscape views, you can always find the perfect angle to view your smartphone at a quick glance.

Main Feature

Flexible gooseneck and 360 degree rotating holder allow you to position your phone or GPS horizontally, vertically, or tilt in any direction, provide the optimal viewing angle, view your device at any angle or orientation while driving.

Hands Free

Comes with easy-to-assemble parts that no tools required. Strong suction cups secure firmly to your vehicle. To adjust the position of the car mount, simply lift the lever at the base of the mount and adjust the position before reattaching and then press down to lock it.

Compatible With Most Phones

With its soft padding, it securely holds your device between 67mm and 97mm, including but not limited for GPS, iPhone 7plus 7 6s 6s+ 6 6+ 5 4, iPod, Samsung Galaxy S7,S6, edge Note 5 4 ,LG G5 G4 Nexus 6P 5X,HTC One, Smartphone and GPS devices.

Super-Strong Suction Cup

Thanks to its super-strong suction cup, the car mount is able to adhere to smooth surface & attach itself firmly to some textured surface. You can keep your focus on the road and your hands on the steering wheel. Besides, it is easy to clean, rinse with water then air dry.

3-In-1 Smart Design

The car phone mount can be wall-mounted or clipped to your car's air vent / dashboard mount / windshield phone mount as for your convenience.

• 👍UPGRADED CLIP: This Car Phone Holder Mount is designed as “hook shape” and form “Three grasp points” which can vise the outlet blades tightly and ensure it never fall off in any situation. The Cell Phone Holder for Car iS BORNED FOR INNOVATION & PRACTICABILITY, it solving the market’s common problem of being easy to fall off over time.
• 👍LOCK YOUR PHONE FIRMLY: LISEN Magnetic Phone Car Mount with 6 built-in strong magnets, the maximum bearing up to weight of 4 cellphones. Powerful suction keep your cellphone stay stably even when drive on a bumpy road. PLEASE NOTE：It is recommend that use the “square pad” on the back of your phone/case. It is more stable than the round.
• 👍EASY INSTALLATION: Benefit from the special design of the clamp, this iphone car mount is quite easy to install, just need to put it on the car’s outlet blades and adjust the length of clamp by turning the knob to match the outlet. Then finish the installation.
• 👍UNIVERSAL COMPATIBILITY: Universal air vent car phone holder will firmly hold most smart phones and mini tablets compatible with iPhone 12 mini/12/12 pro/12 pro max/11/11 pro/11 pro max/XR/X/8/7/6/5, Note 9/ Galaxy S10/ S10+/ S10E/ S9/ S8 /S7 /S6 /Edge S6 /S5, iPad Air 2/Mini 3/ Pro 9.7 and more.
• 👍WHAT'S YOU GET: 1*LISEN magnetic phone car mount, 2*Round metal Pad, 1*Rectangular metal Pad, 2*Round PE Film , 1*Rectangular PE Film. NOTE: THIS PHONE HOLDER ONLY COMPATIBLE WITH HORITABLE AIR VENT AND NOT COMPATIBLE WITH VERTICAL OR ROUND AIR VENT.

• GIVE YOUR DASHBOARD THE LUXURIOUS LOOK YOU SEEK - Bestrix Magnetic Car Mount will give your dashboard the luxurious look you seek, an easy 360° rotation of your phone display and an arm you can adjust for your convenience, guaranteed not to block the driver’s viewer your phone charging ports.
• UPGRADED SUCTION CUP - Upgraded super strong stickiness suction cup with the extra dashboard pad fits all dashboards with smooth surfaces, leather/faux dashboards. It is very easy to install with the unique suction cup (Less than a minute!), just make sure to remove all air from underneath before locking the lever.
• SAFE & SECURE UNDER ANY ROAD CONDITION - Strong Magnetic Silicon surface holding your phone and keeping it safe through every bump on the road, giving you and your phone a smooth ride. In order to achieve it, you will receive 2 metal plates (1 Square & 1 Round) – just place one between your phone and your case and you are ready to go! Please note Wireless charging is not working when using the metal plate.
• SUPERIOR QUALITY - Bestrix magnetic car mount is made with the best and highest quality materials, superior quality ABS plastic that offers flexibility and durability, a strong gel base that will stabilize the product on your dashboard, securing your phone with super strong magnets under the silicon surface(Important note- the magnets can't harm your phone in any way).
• THICK CASE & BIG PHONES FRIENDLY - Bestrix magnetic phone holder for car is compatible with ANY smartphone with almost any Thick Case on the market - iPhone 12/ 12 mini/ 12 pro/ 12 pro max/ SE/ 11/ 11 Pro/ 11 Pro Max/ XS/ XR/ XS Max/ X/ 8/ 8 Plus/ 7/ 7 Plus/ SE/ 6s/ 6 Plus/ 6/ 5s/ 5/ 4s Samsung Galaxy Note20/ S20/ S20+/ S20 Ultra 5G/ Note10/ Note10+/ S10/ S10+/ S10e/ S9/ S9+/ S8/ S8+/ Note8/ S7/ S7 Edge/ S6/ S6 Edge, Sony, LG, Google, Sony, Nokia and all cellphones, GPS device.

User questions & answers

Question:	Can anyone use it
Answer:	Very nice product. Frequently bought together and well works with Guanda Bluetooth FM Transmitter for Car Bluetooth Adapter High-end Car Music Player.
Question:	Does this work for 6.6 inch phone? My phone is honor note 8 and I am afraid it's to heavy to be sucked in
Answer:	I have the iPhone 8 Plus and there is no problem with the weight of the phone and being properly held by the holder. Very pleased with this product.
Question:	I have a iPhone 7s plus will the magnet damage my phone or interfere with the gps function on my phone
Answer:	Use this with Samsung S8. Have not had interference with any functions. Use my GPS frequently and it's perfect. Great product.
Question:	Will this mount work with an I phone 7 plus in an otter box
Answer:	I have the otterbox defender case, and the magnetic mount works great. I attached the metal plate to the back of the hard plastic inner case/shell, and then just fit the rubber outer case over the plastic shell as nornal. The mount has held the phone great for over a year.

• CONVENIENT & SAFE: No more wrestling a cell phone out of a bear trap and being distracted while driving. The car phone holder mount provides a secure and accessible place for your phone. Fully rotational frame should you need to adjust for easy view.
• FITS ANY SMARTPHONE (AND CASE): This magnetic car mount for phone was designed to be universally compatible with any model or size smartphone (Iphone or Android), even while its nested in a protective case. These dashboard mounts can do it all.
• NO MORE TRAVEL ANXIETY: Get rid of the awkward phone stand for your car that is hard to see and always falls out. This magnetic phone holder for car was made with a ball axis capable of being angled to avoid glare or to turn it towards a passenger. 
• SECURE AND EASY TO INSTALL: Designed with an air-vent setup, these mobile devices secure right into place without any adhesive or taking up room. The magnetic phone car mount is very small and unobtrusive and will not be an eyesore.
• LOOKING FOR A GOOD GIFT IDEA?: Look no further! This air vent phone mount for car is sure to please any friend or family member by making their life easier. A practical device that serves a purpose and provides what very few gifts can... convenience.

User questions & answers

Question:	My car has vertical vents with this work
Answer:	I have horizontal vents
Question:	Does this works with iPhone 12 with out the metal plate
Answer:	It only works with metal plate because it needs to stick to the magnet base.

• WIDER COMPATIBILITY: New larger Easy One Touch button and cradle allows for wider device & case compatibility.
• MAGNETIC CORD ORGANIZER: Keep charging cables neatly organized with the magnetic tab located on the bottom foot
• TELESCOPIC ARM: The improved telescopic arm now extends from 5” to 8” (as opposed to the Easy One Touch 4 which only extended to 6.5”) and pivots 225 degrees. This enables a myriad of customized viewing angles while you’re on the road.
• REDESIGNED BOTTOM FOOT: Easier to secure and adjust; simply squeeze the spring button and pull down.
• ENHANCED SUCTION CUP: Redesigned suction cup with an improved sticky gel formula that provides a stronger, lasting hold.

User questions & answers

Question:	Will the adhesive patch damage a leather dashboard
Answer:	I would assume so but it isn't very adhesive honestly I have to wet the sticky part for it to stick to my dash
Question:	Will this cradle hold iphone 11 pro? I have older version for my iPhone 6+, it's still functional & I luv it but my 11 pro does not fit it
Answer:	It fits my iPhone 12 Pro Max, easily
Question:	Is it applicable for windshield as well
Answer:	Yeap! I’ve had mine on my windshield since the day I got it and no issues at all. It’s very sturdy and hardly moves even on bumpy terrain. Hope this helps!
Question:	How wide is the cradle? (How wide can a phone be before it won't fit
Answer:	I used this for my iPhone 8 Plus with an Otterbox Defender on it (not a slim combo) and it was plenty wide enough.

Product features

Telescopic Arm

Arm pivots 225 degrees for custom viewing angles on the road

Suction Cup

Suction Cup can be restored by simply rinsing under warm water and air drying

Mount Foot & Magnetic Organizer

New Foot easily adjust to standard & large smartphones, and helps keep cords organized

What's Included

Includes Mount, Dashboard Pad and Cable Tag

• Secure Attachment: Securely hold your smartphone or GPS on an air vent in your car
• Flexible Fit: Fits most standard air vents and both horizontal & vertical vent blades. Features an adjustable air vent mounting grip to attach to thicker or thinner air vents
• Simple Setup: Easily place and remove your phone using the widely adjustable phone cradle with instant release button. A 360° rotating and pivoting ball joint gives you the ideal viewing angle and allows quick switching between portrait and landscape view
• Soft Surface: The mount is padded with soft silicone to ensure smooth contact with your device and prevent scratches
• Package Contents: AUKEY HD-C58 Car Phone Mount, User Manual

User questions & answers

Question:	Will it hold google pixel 3, with room for c cord through the bottom in a honda cr-z
Answer:	will work on google pixel 5
Question:	This holder is perhaps the cheapest one i have found? Is it reliable
Answer:	Very nice product. Frequently bought together and well works with Guanda Bluetooth FM Transmitter for Car Bluetooth Adapter High-end Car Music Player.
Question:	What if I turn my heat on? Does it make my phone 100 degrees in 5 minutes like my current one
Answer:	You should not have a problem with heat slowing the phone down. I had that happen to me once and I'm a field tech. I also point the vents at the roof of my car which evenly distributes the air and diverts away from the phone. These big mounts usually prevent the phone from getting too hot too. However, I'm in TX and I can't use a windshield mount. The mount will melt right off the suction cup in a matter of several months and I'm stuck buying another one.
Question:	Hi can this fit iPhone 5? Thanks
Answer:	Those grippers on the sides spread quite wide. It holds my iPhone6 in a Mophie battery case just fine. It is the first holder I've found that fits my iPhone6 inside of a Mophie battery case, and holds it snugly while driving. iPhone5 is about the same size as a 6, as I recall. I'm going to guess 99% chance you'll be happy with it.

Product features

Fits Wide Range of Air Vents

The grip can be set to fit different types of air vent, including those with narrow or wide gaps between the slats.

Open Charging Port

Easy access to your phone's charging port for fuss-free charging on the road.

Padded Support

Curved silicone padding provides additional support for your device.

Complete Adjustment

Easily adjust to the perfect viewing angle using the 360° rotating and pivoting ball joint. pivoting ball joint to get a clear & comfortable view.

Instant Release Button

Simply tap the touch-sensitive button to release your phone on arrival.

Keep Your Case On

No need to remove your phone case (up to 5mm thick).