12 best pi heatsink for raspberries

Product description

anodized black aluminum heat sink set for Raspberry Pi models A, B, B+, 2, 3 , 3 B+ and 4 boards. These pure aluminum heatsink include heat conductive adhesive tape for optimum heat transfer. These heat sinks have profiles which are short enough to fit within standard Raspberry Pi cases. These heat sinks kit can be applied in other devices to cool processor, regulators, VRAM VGA RAM, IC Chips, MOSFET SCR, Southbridge, Northbridge etc.

• Suitable for the 2019 Latest Version Raspberry Pi 4 Model B
• Set of 6 Aluminum heat sinks
• Thermal conductive adhesive tape backing
• Can be applied with other devices such as BeagleBone,VRAM VGA RAM, IC Chips, MOSFET SCR, Southbridge , Northbridge etc
• Reduce chip hot-spots and increase thermal dissipation surface area for Cooling Cooler Raspberry Pi 4, Raspberry Pi 3 B+

User questions & answers

Question:	Do they come with electrical isolators
Answer:	Hello, they are just separate heat sink cooling kits. Hope can help you
Question:	will the thermal tape stay attached if the IC is vertical, or even upside-down
Answer:	Yes. I often clean the heatsink and the device tab with an alcohol prep and let it dry before attaching the tape just to make sure

Product description

Included Parts:

• Large Straight-Fin Heatsink with 3M adhesive for SoC
• Small Straight-Fin Heatsink with 3M adhesive for LAN Chipset

Supported Boards:

• Raspberry Pi 4 Model B
• Raspberry Pi 3 Model B+
• Raspberry Pi 3 Model B
• Raspberry Pi 2 Model B

Additional Boards supported by Large Heatsink:

• Libre Computer Board ALL-H3-CC
• Libre Computer Board AML-S905X-CC
• Libre Computer Board ROC-RK3328-CC
• Banana Pi M3 (Allwinner A83T)
• Orange Pi Boards with Allwinner H2+/H3/H5

• EXTREME PERFORMANCE: Straight-fin design with twice the height of other heatsinks for extra heat dissipation performance whether actively or passively cooled. Mandatory for applications in high temperature, sealed, or overclocked applications.
• LONG LASTING EXACT FIT: CPU and LAN chipset heatsinks are fabricated specifically for the Raspberry Pi 3 Model B+ and B. Double-sided 3M thermal transfer tape offers high thermal conductivity and long lasting adhesion in all mounting scenarios.
• QUICK AND SIMPLE INSTALLATION: Peel and stick in the orientation with the most airflow. Most effective solution for reliable performance and longevity. No more messy thermal paste and compatible with LoveRPi Power over Ethernet HAT for Raspberry Pi 3 Model B+.
• NO MORE THROTTLING: Reduce chip hot-spots and increase thermal dissipation surface area by 10x. For Raspberry Pi 3 Model B, cooling amplification for CPU die area is over 100x! Say goodbye to temperature based performance throttling and maintain consistent maximum performance.
• MUST HAVE FOR RASPBERRY PI 3: At full load, BCM2837 SoC will reach 100°C. That is hot enough to boil water! Together with active cooling an active cooling case like the LoveRPi Active Cooling Media Center PC Case, the heatsink will keep temperatures below 20°C above ambient.

User questions & answers

Question:	Will these work for the Pi 3 B
Answer:	Absolutely. I have them on a Pi 3 B+ myself.
Question:	Ram heatsink included in this too
Answer:	The heatsink included only cover the LAN chip and SoC. The LPDDR2 on the back side does not get warm enough to warrant a heatsink.
Question:	Does it use actual thermal tape, and is the tape electrically conductive
Answer:	It does, and no, the tape is not conductive.
Question:	What kind of 3M adhesive is used? What is the model number of the tape
Answer:	3M 8810

Product description

IMPORTANT NOTE: If you see a rainbow splash screen with a lightning bolt symbol, this indicates you are NOT using B+ compatible software. NOOBS 2.7.0 or later is required for operation of the B+.



An exclusive kit from CanaKit that includes the fastest model of the Raspberry Pi family - the Raspberry Pi 3 Model B+ (B Plus)!



The Raspberry Pi 3 Model B+ is the latest production Raspberry Pi 3 featuring a 64-bit quad core processor running at 1.4 Ghz. It incorporates built-in WiFi and Bluetooth connectivity with enhanced dual-band 2.4 GHz and 5 GHz WiFi, Bluetooth 4.2/BLE and faster Ethernet.



To take full advantage of the improved power management on the Raspberry Pi 3 B+ and provide even support for even more powerful devices on the USB ports, a 2.5A adapter is recommended.



The power supply included in this kit incorporates a noise filter to provide the highest stability and comes with a 5-foot cable. This power supply can power the Raspberry Pi 3 B+ and other USB accessories (such as most portable hard drives) without requiring an external powered USB hub.



Kit Includes:

Raspberry Pi 3 Model B+ (B Plus) with 1.4GHz 64-bit quad-core ARMv8 CPU (BCM2837B0) 1 GB LPDDR2 SDRAM

CanaKit 2.5A Micro USB Power Supply with Noise Filter (UL Listed) specially designed for the Raspberry Pi 3 B+ (5-foot cable)

Set of 2 Aluminum Heat Sinks

CanaKit Quick-Start Guide

• Includes Raspberry Pi 3 B+ (B Plus) with 1.4 GHz 64-bit Quad-Core Processor, 1 GB RAM
• CanaKit 2.5A USB Power Supply with Micro USB Cable and Noise Filter - Specially designed for the Raspberry Pi 3 B+ (UL Listed)
• Dual Band 2.4GHz and 5GHz IEEE 802.11.b/g/n/ac Wireless LAN, Enhanced Ethernet Performance
• Set of 2 Aluminum Heat Sinks
• CanaKit Quick-Start Guide

User questions & answers

Question:	Does the pi3 case fit this model
Answer:	It depends on the case. My pimoroni case no longer fit the B+, but I was able to snap off a piece and drill a hole to make it work. There's a new POE (Power-over-Ethernet) component, as well as a pair of jumpers that may get in the way.
Question:	Is the power supply the same for the 3B+ the same as the previous 3 version that canakit supplied
Answer:	Yes, as far as I can tell. However, you must update and have the most current operating system (OS) or you will get a power supply message in the form of a lightning bolt in the corner of your screen.
Question:	Can i take the micro card out of my rpi3 b and use it in the b+ model without having to reinstall anything
Answer:	No, you'll have to run "sudo apt update & sudo apt upgrade" from your old pi or reinstall from a fresh image. Otherwise, it will just boot to a rainbow and hang.
Question:	Does this kit come with any thermal adhesive to attach the Heat Sinks with
Answer:	It does not come with thermal tape or adhesive. It comes with foam tape, which is not what you want for heat sinks.

• Unique Removable Top Cover Design, you can get in touch with the GPIO or Camera Connector Very Simple
• With 40mm Quiet Cooling Fan, it can drop the temps for your Pi
• Include Raspberry Pi 4 Heatsink, Better Cooling Experience
• Awesome Looking, it can make your Pi looks Cooler than others
• NOTICE: Updated version can compatible with Pi 4 Model B

User questions & answers

Question:	Do the fans make a lot of noise
Answer:	No this is very quiet, mine does not make any noise at all
Question:	Will this fit the Asus tinker board
Answer:	sorry, it cant
Question:	Why not b
Answer:	Because of the position of the Chip, the B+ version will be listed soon
Question:	Will this case be released for the B
Answer:	It will be listed very soon.

Product description

For Dual Fan:

- Low Power Consumption Design

- Dual Cooling Expericnce, No More Overheating Problem

- Very Quiet Cooling Fan, You Can Hear Even Nothing

- All of the Fans were Tested by Our Engineer, Very Nice Quality Control

- Update Thermal Tape Can Make Sure Best Heat Conduction Effect



For Aluminium Alloy Case and Heatsink:

- Perfect Size for Raspberry Pi 4 Model B

- Big Size Heatsink and Cooling Fan Can Make Sure: No More Overheating Problem

- High Quality CNC Aluminium Alloy Case Can Protect your Pi Safe

- Open Design Can Make Sure Our CNC Case will not effect Wifi Signal



Package Included:

1x CNC Aluminium Alloy Case With Dual Fan

1x Screw Set

1x Thermal Tape



Notice: Raspberry Pi is NOT Included

• Updated Manufacturing Process with Improved CNC Aluminium Alloy Quality
• Cool Design and Nice Looking Raspberry Pi Case With Dual Fan
• GPIO and all Main Connectors are easily access to use
• Comes with MazerPi Dual Cooling Fan; No More Overheating Problem
• Comes With High Quality Thermal Tape

User questions & answers

Question:	How thick are the thermal pads? I think I'm going to replace them
Answer:	The pads are not very thick. Maybe 1-2mm.
Question:	How thick is the thermal tape? My pads ended up tearing... The stickers on the backside of the pad were so hard to take off it ruined my pads
Answer:	I tore mine a little, it is more like molding putty than a pad, so i laid it down on the chip and brought the tear back together. I ended up using a box cutter blade to separate it from the backing.
Question:	what temperature range does this extend the device to
Answer:	This information regards only the cpu: Idles at around 40c, using synthetic stress test it maxes out at 50c, with overclocking to 1.75ghz it maxes out at 53c
Question:	what are the dimensions of the fans
Answer:	The fans are flush relative to the top of the heatsink. If you're trying to replace the fans, they're approx 1" square and 3/8" high. They are held in place by 4 machine screws (provided). I like the heatsink as it doubles as a case. With the Pi 4 you MUST use a heatsink, a fan is good. The postage stamp stick-on heatsinks that you could use on a Pi 3 are not sufficient to remove the heat.

• Geekworm Raspberry Pi 4 armor case, aluminum alloy metal case specially designed for the Raspberry Pi 4 Computer Model B (1GB/2GB/4GB/8GB)
• All ports and slots of the aluminum alloy case can match with Raspberry Pi 4 Model B computer perfectly; Add 2pcs 2x20 Female Headers to extend the GPIO pin and insert GPIO cable.
• Open case design, don't need to worry about affect wifi signal, it is a good raspberry pi 4 heatsink case with good heat dissaption
• Reinforced aluminum material, lightweight and durable, long-lasting stainless
• With 3 pieces thermal pads (the thickness is only 0.5mm) to touch the shell body to dissipate heat. You can also use the CPU grease (not included) to get better heat dissipation. Note: If you think the blue Thermal Tape is not good enough for heat dissaption, you can replce it with thin 0.5mm cooper heatsink match with silicone grease (recommend Shin-Etsu Shin-tsu X-23-7921-5) for better heat dissaption.

User questions & answers

Question:	Where is this product made
Answer:	Hi, it is made in China.
Question:	Can anyone tell me the screw head height and diameter
Answer:	Hi friend, You can use M2.5x10mm screws. Best regards, Cindy/Geekworm
Question:	The advert says "wifi signal is well accepted." with top and bottom metal casing, wifi must be affected. has anyone tested wifi case on and off
Answer:	I have a Raspberry Pi 4 1GB without this case on it sitting approximately 5 feet away from my Amplifi router. Link Quality=58/70 (±3) Signal level=-52 (±5) dBm. I have a Raspberry Pi 4 4GB WITH this case on it sitting approximately 10 feet away from my Amplifi router. Link Quality=61/70 (± 3) Signal level=-49 (± 5) dBm. I ran 50 tests on each one. It seems that the differences are negligible. I am not in the position to increase the distance between the Wifi router and these test devices, as they are both mounted in fixed locations.
Question:	The advert says "wifi signal is well accepted." with top and bottom metal casing, wifi must be affected. has anyone tested wifi case on and off
Answer:	wifi was severely affected with this case on my Raspberry Pi 4. I also have a small router nearby on my desktop and the RPi4 struggled with its signal as well.

Product description

This set of raspberry pi 4 heatsink kit, includes 15pcs anodized black aluminum + 5pcs copper cooling heat sink. These pure aluminum (15 pcs) and copper (5pcs) heatsink include heat conductive adhesive tape for optimum thermal transfer. These heat sinks have profiles which are short enough to fit within standard Raspberry Pi cases. These heat sinks kit can be applied in other devices to cool processor, regulators, VRM VRAM VGA RAM, small IC Chips, MOSFET SCR, Southbridge, Northbridge etc. Package includes: 5pcs aluminum large heatsink: 0.56 x 0.56 x 0.27 inch (14mm x 14mm x 7mm) (L*W*H); 5pcs aluminum small heatsink: 0.35 x 0.35 x 0.19 inch (8.8mm x 8.8mm x 5mm) (L*W*H); 5pcs aluminum heatsink 0.56 x 0.39 x 0.27 inch (14mm x 10mm x 7mm); 5pcs copper pad shim heat sink: 0.59 x 0.59 x 0.02 inch (15mm x 15mm x 0.5mm) (L*W*H).

• Raspberry Pi 4 Heatsink Kit, suitable for Raspberry Pi 4 B, 3 B+, 3, 2, A, B, B+ boards.
• Includes 15pcs black anodized aluminum + 5pcs copper heatsink.
• 3M 8810 Thermal conductive double side adhesive tape backing.
• Can be applied with other devices for cooling VRAM VGA RAM, IC Chips, MOSFET SCR, Southbridge , Northbridge etc
• Raspberry pi not included.

User questions & answers

Question:	how many raspberry pi 3b+ units will this kit cover
Answer:	Five. Three heatsinks per Pi.
Question:	Will these work with dual vnh2sp30 stepper motor driver module monster moto shield
Answer:	I haven't used that shield, so I can't say for sure. I have used them on a RPi with a Pi Sense HAT.
Question:	How long will the adhesive on the tape last? Will it degrade in a few short years or last decades
Answer:	I'm not sure, I've had them for a while, but not a year yet. Given that it is 3M 8810 (used in many heat conductive applications), I would expect them to stay stuck as long as I expect the Raspberry Pi to last. I think I will want to upgrade Pi before they come off.
Question:	copper heat sink goes on top of Pi 4 processor? Aluminum fin heat sink on top of copper
Answer:	On the pi4b the thin copper plate isn't used. You only use the three finned heatsinks for the three chips on top of the board.

Product description

Description:

The 52Pi New Colorful Ice Tower Cooler is inspired by the single-stack tower-style heatsink and fan (HSF) assemblies which dominate the desktop PC market. It includes thermal interface material (TIM) pads, mounting brackets and accessories for the Raspberry Pi 4 and Raspberry Pi 3 Model B/Model B+, a tiny screwdriver, and a small but full-color manual. new feature is using Compatible bracket and a color LED fan with automatic color change.



Features:

Color LED fan with automatic color change

Single-stack tower-style heatsink

DC 5V Power in (Can be powered by the Raspberry Pi)

5mm copper tube

Super heat dissipation

Rated power 0.4W @5V, 0.08A

Easy to setup

Acrylic protection panel

Plug and play



Package Includes

1 x Ice Tower Cooler

4 x M2.5x6+6 Copper Stick

4 x M2.5 Nuts

6 x M2.5x6 Screws

3 x Thermal Tape

1 x Screwdriver

1 x Mounting brackets pack (For 3B/3B+/4B)

1 x Acrylic protection panel

1 x Instructions

• Compatible with Raspberry Pi 4B and Raspberry Pi 3 Model B/Model B+
• DC 5V Power in (Can be powered by the Raspberry Pi)
• Color LED fan with automatic color change
• 5mm copper tube;Super heat dissipation;Rated power 0.4W @5V, 0.08A

User questions & answers

Question:	What is the thermal contact block made of? Is it a thermal paste-safe metal
Answer:	Aluminum with the copper pipes exposed in the middle. I'd suggest a thermal pad as the gap may be too wide for paste to adhere and make good contact. It comes with one but there are better ones out there.
Question:	Does this fan run continuously or just above a certain CPU temperature
Answer:	It runs continuously, but in all honesty, it's very quiet and not really noticeable...at least to me. It really does a great job at keeping the temp way down on my pi.
Question:	Is there another way of powering the fan other than the gpio ? i need to use the gpio for another itemized
Answer:	This is an old question but still think an answer is needed. You can use an external source. A usb hub or something similar. You can also use the Pi's usb port. Wiring the fan to a usb cable should be fairly easy.
Question:	What is the height of the heatsink with fan installed
Answer:	38mm from the pcb to the top of the fan.

• ❤ Raspberry Pi heatsink copper pad shims with Conductive Adhesive Tape.
• ❤ Fits for Raspberry Pi models A, B, B+, 2, 3 ,4 boards, compatible with most Raspberry Pi cases.
• ❤ Conductive adhesive tape backing, good performance on heat dissipation and long lasting.
• ❤ Package included : 80 pcs aluminum heatsink + 20 pcs copper heatsink( It Contains 8 different sizes of heat sink ).
• ❤ Also could be used for Cooling Development Board Laptop CPU GPU VGA RAM VRAM VRM IC Chips LED MOSFET Transistor SCR Southbridge Northbridge Voltage Regulator

Product features

Strip heat sink

Made of aluminum, high strength, good heat dissipation.

Honeycomb heat sink

Made of aluminum, high strength, good heat dissipation. Honeycomb shape, better heat dissipation.

Copper heat sink

The heat sink made of copper has good heat dissipation effect and the thin design is suitable for special scenes.