14 best corner protector for babies
Corner protectors for babies, often referred to as edge corner guards or baby safety corner guards, are essential childproofing accessories designed to protect infants and toddlers from sharp edges and corners in the home. These products are commonly used in homes with furniture and fixtures that have hard, angular edges, such as tables, countertops, cabinets, and shelves.Here are some key points about corner protectors for babies:
Safety: The primary purpose of corner protectors is to prevent accidents and injuries caused by children bumping into or falling onto sharp edges and corners. These can result in cuts, bruises, or more severe injuries.
Design: Corner protectors are typically made from soft, cushioned materials like foam, rubber, or silicone. They are designed to fit securely over the edges and corners of furniture to create a protective barrier.
Easy Installation: Most corner protectors are easy to install and do not require any special tools. They often come with adhesive backing that allows you to stick them firmly to the edges and corners of furniture.
Variety of Shapes: Corner protectors come in various shapes and sizes to accommodate different types of furniture. Some are designed specifically for table corners, while others can be used on a wide range of surfaces.
Clear or Colored: Corner protectors are available in both clear and colored options, allowing you to choose a style that blends with your furniture or is less noticeable, depending on your preference.
Removability: Many corner protectors are designed to be easily removed without causing damage to the furniture. This is useful if you want to remove them once your child has outgrown the need for added protection.
Effectiveness: When properly installed, corner protectors create a soft barrier that absorbs the impact of a child's collision, reducing the risk of injury significantly.
Versatility: These protectors are not limited to home use. They can also be used in daycare centers, schools, and other places where young children may come into contact with sharp-edged furniture.
Cost-Effective: Corner protectors are an affordable and cost-effective way to enhance the safety of your home for your baby or toddler.
Maintenance: To ensure continued effectiveness, it's essential to periodically check and reattach corner protectors if they become loose or damaged.
In summary, corner protectors for babies are essential safety accessories for childproofing your home, helping to prevent accidents and injuries caused by sharp edges and corners on furniture and fixtures. They are easy to install, come in various styles, and are a cost-effective way to provide added safety for your little one.
Below you can find our editor's choice of the best corner protector for babies on the marketProduct description
CalMyotis
CalMyotis, a mom&baby brand from China
Focus on mother and baby products, and protect babies safety
Growing startups are hungry for consumer support and feedback
Features
✔Moderate thickness, surrounds the sharp corners, providing sufficient cushioning when collide.
✔Clear, does not hinder the appearance of the furniture and reduces the child's attention.
✔On the basis of the first generation, we listened to the opinions of customers and updated the viscosity of the adhesive after continuous improvement by technical staff.
Content
✔12 / 18 / 24 x corner protector
✔36 / 54 / 72 x Adhesive
Installation Tips
✔Before use, please clean the dust and grease on the table corner to avoid affecting the stickiness.
✔After installation, press for 30s to exhaust the internal air.
✔Adhesive is acrylic glue, which appears inert in winter. If the adhesiveness is not good, please use a hot air blower to soften the adhesive and increase the adhesiveness.
- ✅ AUTHENTIC CERTIFIED SAFETY PRODUCT - This product should be used under adult's supervision, all our products are tested under strict US regulations. There are no phthalates, BPA, chemicals or added toxic fire retardants (SCCPs).
- ✅ SPECIAL DESIGN AND 1 MINUTE INSTALLATION - Our protectors are designed by Mechanics expert to protect your baby from being hurt by the corners of coffee table,desk,TV cabinets and other sharp corners in the house. And under our instructions, you can easily finish the installation.
- ✅ CUSTOMIZED HIGH POWER ADHESIVE - Based on most of the feedback we received, we offer a custom 1mm high power adhesive on each side of the guard , covering the interior as a whole, to prevent the guard from being teared off by the child. And it can removes the residual trace without damaging the furniture.
- ✅ TRANSPARENT AND SOFT - Our totally transparent protector are like a part of the furniture to keep the original look of the furniture. The improved PVC material is more flexible and provides soft bumps at the corners to reduce the likelihood of injury.
- ✅ LIFETIME GUARANTEE - We strive for the highest quality and best services to 100% guarantee your shopping experience. If you receive a defective corner protectors, you can send it back without conditions and get a replacement for free.
- ✅ AUTHENTIC CERTIFIED SAFETY PRODUCT - This product should be used under adult's supervision, all our products are tested under strict US regulations. There are no phthalates, BPA, chemicals or added toxic fire retardants (SCCPs).
- ✅ SOFTER AND ODORLESS - Soft and transparent improved PVC material, which minimizes the taste of the protectors. has soft bulges at the corners and edges, which not only reduces the possibility of injury, but also seamlessly blends with your furniture to maintain the original look of the furniture.
- ✅ ADVANCED HIGH-POWER ADHESIVE - We offer a custom 1mm high power adhesive on each side of the corner protector with no gaps in the inside of the corner protector. And it can remove the sticker without damaging the furniture.
- ✅ SPECIAL DESIGN AND 1 MINUTE INSTALLATION - Our protectors are designed by Mechanics expert to protect your baby from being hurt by the corners of coffee table,desk,TV cabinets and other sharp corners in the house. And under our instructions, you can easily finish the installation.
- ✅ DEVOTED CUSTOMER SERVICE - This product comes with 1-MONTH full refund trial period. If you receive a defective corner guards within 30 days, you can send it back without conditions and get a replacement for free.
User questions & answers
Question: | What should I pay attention when I install it |
Answer: | There is a 2 sided tape to put on the corner protector first. Take your time with this part! The neater you put that tape on, the easier it is to install the protector. |
Question: | Are these corner protectors as transparent as the picture depicts |
Answer: | Yes. The corner protector is transparent, and it will not affect the furniture after installation. Moreover, the adhesive is also transparent. There is a protective layer on the surface of the adhesive, and it is transparent after removing the protective layer. |
Question: | Will they stick to a marble countertop |
Answer: | Yes. For the large number, my wooden dresser and glass table are installed in them, and they work well. |
Question: | Will it damage the desktop when removed |
Answer: | Normally, it will not damage your furniture. But if your furniture is with a paper laminate cover or those tend to lose paint, I don't suggest you install it on these furniture because the adhesive is super sticky and it is possible for you to damage the furniture. |
- ALWAYS KEEP YOUR CHILD SAFE! You love your baby more than anything, and you want to prevent head and knee injuries from sharp corners. That's why you'll love our Sure Basics Impact Absorbing Corner Protector.
- QUICK INSTALLATION IN 1 MINUTE - Comes Pre-Taped - Install your table corner protectors for baby in seconds without any hassle! Simply peel back the tape backing, and place edge guard on the desired surface.
- PEACE OF MIND PARENTING - Completely childproof the sharp edges and corners in your home without damaging your beautiful furniture. Our safe baby safety corner guards use long-lasting double sided adhesive tape that sticks on Wood, Glass, Steel, and Ceramic surfaces.
- THE PERFECT GIFT FOR SMART MOMS! The best solution is always prevention! If you are looking for a thoughtful gift for parents and grandparents, then you have found a winner with our 8-Pack of baby corner guards! It's a gift that keeps on giving!
- SAFETY PRECAUTIONS FOR THE WIN - Did you know sharp edges on tables, shelves, chairs, and furniture can cause nasty injuries for children? Now you can prevent unnecessary accidents while your child plays with our Extra-Cushioned furniture corner protectors! Click the yellow "Add to Cart" button today, and start enjoying greater safety in your home!
User questions & answers
Question: | Do you sell matching table edge bumpers |
Answer: | We do not sell the matching table edge bumpers at this moment. |
Question: | Can these be cut to fit? My bed frame base board sticks out and is only about two inches wide but I need corners on both sides to be protected |
Answer: | Yes they can be cut to fit. I used a utility knife to adjust the length on a corner of a book cabinet. These work well . |
Question: | Can you purchase more tape for these |
Answer: | Any authentic double sided 3M adhesive tape would work with it. Unfortunately we do not sell the tape separately. Thank you. |
Question: | What is the actual size (length x depth) of the protector - large and small? Description only provides package size |
Answer: | Greetings, The size of the small corner guard: Length: 50mm by 50mm Height Section: 24mm by 24mm Thickness: 8mm The large baby proofing corner protector is: Length: 50mm by 50mm Height Section: 32mm by 32mm Thickness: 11mm |
Product features
Sure Basics Baby Safety Corner Guards (8 Pack)
Babies fall countless times while learning to walk. Any experienced parent knows a hard fall against a coffee table corner can result in a painful bruise or cut, even a trip to the hospital. Padding the sharp corners in your home is a great way to keep your baby safe when they're most fragile.
Sure Basics Baby Proofing Corner Protector are designed and tested for use with children of all ages. Simply peel the adhesive backing and stick to the corners of tables, desks and other furniture.
Thick, Soft and Durable Rubber Corner Guards
Protect Sharp Corners
Use Anywhere
8 Pack of Corner Guards
Trust Your Home to Sure Basics
Sure Basics is a producer of child-proofing and baby safety products. We’re dedicated to protecting children from bumps, bruises and cuts, and parents from the inevitable worry that comes with raising a child. Our company was founded in 2014 and our goal from the beginning has been to offer a wide selection of quality child-proofing products at the most affordable prices to families around the globe.
Our products are suitable for children of all ages and a variety of spaces in the home. Each product is designed and made with the highest calibre, trustworthy, non-toxic materials, is rigorously tested for safety and durability. At Sure Basics, we always value your time and money, but most importantly, we value your peace of mind, and the health and happiness of your family. Join us in our journey of parenthood and make your home safer today!
- 16 L-SHAPED+ 8 BALL-SHAPED: THE BALL-SHAPED CORNER BUMPER are applicable for furniture with UPPER CORNERS. It can protect the baby from getting injured by colliding with the furniture when lower his/her head, crouch down or fall. THE L-SHAPED ONES are suitable for furniture with both UPPER AND LOWER CORNERS. It can cover the upper and lower corners at the same time, which ensures that your baby won’t get hurt when playing under tables.
- NEWLY UPGRADED ADHESIVE: Thickened adhesive provides a stronger adhesive. When you are not using it, you can remove stickers without damaging your furniture, leaving no residues on the surface. 8 extra adhesive set are included as free gift.
- PVC MATERIAL AND INSTALLATION: Baby corner guards are highly transparent, can completely match your home decor style without changing the appearance of your furniture. Non-toxic and odorless PVC material serves well and safely. Easy installation, no extra tools needed. Just simply peel off the protective film on the adhesive and apply rubber corner guards onto your furniture, then press it for about 1 minute, done!
- SUITABLE FOR ALL KINDS OF FURNITURE: Edge protector is soft and elastic, can protect your baby from getting hurt by sharp corners of tables, nightstands, chairs, desks and basins. Besides, you can choose glass corner guards that can better fit your furniture according to its shape.
User questions & answers
Question: | Where are they made |
Answer: | They are clear plastic |
Question: | How many are there in one package |
Answer: | There are 24 of them in total, including 16 L shaped ones, 8 round ones and many extra adhesive pads. |
Question: | What is the heigh |
Answer: | The Ball-shaped corner protectors is 0.79 inches high, and the L-shaped corner protectors is 0.59 inches high. |
Question: | Would they work on a tile shower bench |
Answer: | They will probably adhere to the tile with no problem, but they may need to be replaced when they get wet because they could loosen or fall off. |
Product features
Funtion
The baby proof corner protectors not only prevent your baby head from being scratched by sharp corners, but also protect your walls when moving furniture.
16 l shaped+8 ball shaped
The ball shaped corner bumper are applicable for furniture with upper corners. it can protect the baby from getting injured by colliding with the furniture when lower his/her head, crouch down or fall. the l shaped ones are suitable for furniture with both upper and lower corners.
Upgraded thickened adhesive and 8 extra sets of tapes
Newly upgraded thickened adhesive provides a stronger adhesive. Each package contains 8 extra sets of tapes, which can be replaced in time if you accidentally break it or stick it in the wrong place.
Non-toxic and odorless PVC material
Baby corner guards are highly transparent, can completely match your home decor style without changing the appearance of your furniture. non-toxic and odorless pvc material serves well and safely.
Features&Specification
1. Non-toxic and odorless PVC material.
2. Upgraded and thickened adhesives, strong and long-lasting. 8 extra sets of adhesives included as free gift.
3. Easy to install, 100% tool free.
4. High transparency, cause no influence to the furniture’s appearance.
5. Combination set of different types of clear edge protector can suit your need better and is more applicable to different furniture.
Weight: 281.2g/pack 9.92oz/pack
Material: PVC
Pack: 24(16L shaped +8 ball shaped)
Adhesive: 24+8 sets
- ❗ TASTELESS AND SAFETY - Our UXU corner protector is made of PVC, Silicon and BPA Free. They are produced under a strict standard and come out to be excellent quality. So the corner guard does not have a severe irritating odor, ensuring the safety of you and your family, especially the babies.
- ❗ UPDATED CLEAR TRANSPARENCY - Based on the first generation, we introduced an upgraded transparent corner guard. The furniture corner can be clearly displayed, even the details of the texture. So it wouldn’t affect the appearance of your furniture.
- ❗ WIDELY USE - Do you always consider the table corner protector which is suitable for your furniture or not? Don't worry about that. Our baby safety protectors can widely use in different materials and furniture, such as wood, glass, table, cabinet, refrigerator and so on.
- ❗ STRONG ADHESION AND NO STAIN REMOVAL - The powerful adhesion can support kilograms of force. Even adults can not easy to peel it off. And corner guard can be removed without residue. A hair dryer would remove it easier. So your furniture would not be damaged.
- ❗ GOOD CUSTOMER SERVICE - We aim to provide good quality product and sincere service for our customers. If you are not satisfied with our corner protector or service, we are grateful to solve your problem.
User questions & answers
Question: | Is the adhesive strong enough to hold these corners in place when mounted upside down on the underside of a desk drawer box corner? For ones knees |
Answer: | If adhesives are added on all 3 side of the protector I don’t see it coming off, although hitting your knee on the corner of your desk drawer might still hurt. It’ll only take away the sharpness off the corner. I installed mine 3 months ago and still going strong ! And will not move at all. |
Question: | Does it look the same as the picture |
Answer: | Yes looks just like the picture. I really like these. |
Question: | How to install the corner protector |
Answer: | Clean the furniture first. Next, apply the adhesive to 3 internal sides of the corner protector. And then remove the white protective layer. At last, stick it to the corner. |
Question: | What to do if the glue sticks to the table |
Answer: | You can take the glue off with some “goof off” or adhesive remover. If it’s glass you can use glass cleaner and a small blade to scrape it off carefully. Hope this helps |
Product features
Corner protector and edge protector
Our products are protective products that every family should have. A corner protector can provide safety for the family to avoid injuries.
The baby proofing corner protector is suitable for most materials and furniture. This is a convenient baby proofing corner protectors and easy install.
Tasteless
Our table corner protection is made of PVC, Silicon and BPA Free. It has no strong smell. It is a qualified product of baby safety.
Transparent
Our UXU corner protector is more transparent and shiny, does not interfere with the appearance of furniture, and reduces the attention of the child.
Strong adhesion
Based on the first generation, We are based on market needs and opinions and updated the viscosity of the adhesive after continuous improvement by the technical staff.
Clean the surface
Clean the surface of the furniture without stains and dust
Apply Acrylic adhesive
After removing the protective layer, do not touch the surface of the adhesive with your hand.
Press firmly
Stand at the corner and press hard, Make sure the protector is stable enough for 24 hours.
- HEAVY-DUTY PREMIUM RUBBER FOAM: Shore A 20-N density / 0.4-inch thick - maximum impact absorbent.
- CLEAN SAFETY: Roving Cove uses safe and pure raw material and was the first brand to make foam safety bumpers without the use of toxic flame-retardant chemicals (SCCPs). Our edge corner guards contain no BPA, no phthalates, no heavy metals, no latex, no SCCPs. Inherently flame-resistant; passed flammability tests under US regulations.
- DENSEST: Density is more important than thickness when it comes to softening impact. Our edge and corner guard measure Shore A 20-N density, much more dense than the industry standard of 13. Soft, high-density premium cushions absorb impact and protect your loved one from the sharp corners and edges in your home (nursery, kitchen, fireplace, coffee table), school, daycare, preschool, hospital, assisted living facility, senior housing, nursing home, factory, office, museum, restaurant and more.
- JUMBO PACK: Covers 20.4 feet (245 inches) of surface area: 18 feet (5.5 meters) edge guards + 8 corner guards. Fits all standard size tables (round table up to 69" diameter, square table up to 56" square and rectangle table up to 36" x 78"). L-Shaped safety bumpers. Industrial strength.
- SECURE ADHESION: Includes authentic easy-to-peel 3M double-sided tape (36 feet of tape for the edge guard), with 8 corner guards pre-taped. Coffee Brown color matches with oak, walnut, mahogany, cherry, or dark brown-colored wood, brick, stone, glass; such as coffee tables, chairs, chests, shelves, stairs and fireplaces/hearths. All text and photos/images in this product listing are copyrighted materials. Copyright: 2012-2020 Mayapple Baby LLC, Brooklyn NY, USA. Designed in USA.
User questions & answers
Question: | Will this work on non-right angles? My tv table is 3 glass shelves and 1/2 an octagon with obtuse angles |
Answer: | Sticks to my brick fireplace well |
Question: | Will this work on a round marble table |
Answer: | it has 2 and it is so very comfortable to float around in. |
Question: | does it leave anything behing when removed |
Answer: | I've had me, my wife, both kids and the dog on it without sinking it. |
Question: | is it stick to brick fireplace |
Answer: | The is a chance the valve isn't completely sealed. If you still have issues, I suggest contacting the Airhead Sports Group customer care team at 800-624-1297 or [email protected]. Thank you. |
Product description
Clear thickened design corner protector & corner guard & Edge Bumpers
(1)Clear and Thickened
Thickened design,High elasticity and Super transparent,our corner guards can help you to protect baby and adults very well,and no need to affect the furniture's appearance.
(2)High Power Adhesive
Each corner guard comes with NITTO strong adhesives.It is stronger than ordinary adhesives。
(3)Size
Size:1.7 inchs(4.32cm)provides more protection,NO CHOKING HAZARDS & FOOD GRADE PVC helps make your home much safer。
Attention:
1. Please do not apply the product on weak or soft ends.
2. Please ensure the inside of corner guards and furniture corners clean and dry before use.
3.This is NOT a toy or teether.To be used by adults only.
- 1,KEEP SAFE:Thickened design baby Proof Corner Guards,Stop Child Head Injuries from Tables, Furniture and Sharp Corners.
- 2,CLEAR AND CLEAN: Since these corner protector are clear & transparent, once you put them on you won’t even notice that they are there! They blend seamless with your furniture, maintaining that original look and feel of your furniture.
- 3,EASY INSTALLATION: All the pieces you need, including extra hold adhesives, pre-applied directly at factory, you only need to remove covering then stick on your table corners and press for one minute!,It’s that simple! (There is also a spare strong adhesive in the package.)
- 4,TIPS:Clean the surface before installation to ensure that there are no dust, water, oil, and do not attempt to move the corner protector within 24 hours of installation.
- 5,Every corner protector you ordered from us enjoy a free replacement or full refund in 30 days.
User questions & answers
Question: | Will this work on a 1/4 inch shelf depth with an uneven surface |
Answer: | Based on my use with half inch thickness, having a smooth surface will probably be best for optimum adhesion unless you also use a supplemental adhesive to make up for the uneven surface. |
Question: | Is it easy to get pulled by a toddler |
Answer: | Got the plastic protectors because my granddaughter she always like to run around the table and soon as I put those on I know that if she runs into it or hit it by accident she say they were very well and I'm very happy to Havel anyone with children grandchildren young children should get these if they have Corner tables or sharp edges in their home feeling very very good to have |
Question: | Will these leave a residue when removed |
Answer: | Well, I actually tried to take one off after several days just to check how strong it was, and it did not leave any residue on. I don’t know for a long period of time. So far so good. It was placed on a white chest so I would see it right away I guess, just because is white. Hope this helps. |
Question: | Is it suited for outdoor use |
Answer: | Although the adhesive seems to be durable, it’s life would probably be shortened by the outdoor variables. I enjoy their utility indoors, but would not recommend for outside for long-term. |
- FIRST & FOREMOST - SAFETY FOR BABIES AND KIDS: Don't risk it when it comes to safety!
- EASY: Securing sharp corners is simple! Perfect for protecting both you and your baby from sharp edges of the table.
- CLEAR, TRANSPARENT, AND CLEAN: Skyla's clear furniture cover - corner protector blends seamlessly!
- FOREVER AT PEACE: Never again feel fearful and anxious about your child being at risk! Childproof.
- BUY NOW: Our premium edge guards have three times more hold and cushion than what's in the market.
User questions & answers
Question: | Would this work for corner of tvs so they don’t hit walls when on a swivel tv mount |
Answer: | not sure but don’t see why not- good for all sharp corners |
Question: | What material are these? Is it more hard plastic or rubberized? Looking for something protective but also sound reducing if it hits a wall |
Answer: | Relatively soft rubber. I'm not sure in what you mean by sound reducing, but it should deaden the noise of whatever you are putting it on. |
Question: | Do they come in a smaller size |
Answer: | Hello, Thank you for your question. This is the only size they come in. |
Question: | Do these work on beveled edges |
Answer: | Hello, Yes, they do, depending on how beveled your edges are. The best thing about our corner guards is that you can try it risk-free. This means if you are not 100% satisfied, you are covered by our no hassle 100% refund policy. Thank you |
Product features
Never feel anxious that baby's at risk of serious cut injury
Just mount them! You & little ones won’t even notice them. Fewer chances of determination to removing them or taking them off!
- HEAVY-DUTY PREMIUM RUBBER FOAM: Thick, dense and soft - maximum impact absorbent.
- CLEAN SAFETY: Roving Cove uses safe and pure raw material and was the first brand to make foam safety bumpers without the use of toxic flame-retardant chemicals (SCCPs). Our corner guards contain no BPA, no phthalates, no heavy metals, no latex, no SCCPs. Inherently flame-resistant; passed flammability tests under US regulations.
- DENSEST: Density is more important than thickness; when it comes to softening impact. Roving Cove corner guards measure Shore A 20-N density, much more than the industry standard of 13. Soft, high-density, premium corner cushions absorb impact and protect your loved ones from the sharp corners and edges in your home (nursery, kitchen, fireplace, coffee table), school, daycare, preschool, hospital, senior facility, nursing home, factory, office, museum, restaurant, hotel and more.
- SECURE ADHESION: Includes authentic, easy-to-peel, premium 9448A 3M double-sided tape on PRE-TAPED corner cushions. Oyster color goes well with maple, birch, alder, or light-colored furniture, such as beige, white, off-white and gray tables, chairs, chests, shelves, stairs and fireplaces/hearths.
- DESIGNED IN USA: Includes 8 premium, pre-taped, baby proofing corner protectors. All text and photos/images in this product listing are copyrighted materials. Copyright: 2012-2020 Mayapple Baby LLC, Brooklyn NY, USA.
User questions & answers
Question: | Where can I buy additional double sided tape for this |
Answer: | Any bookstore |
Question: | Will these work on counter tops |
Answer: | It will a depend on wide are your counter tops. It fit well on the corners of my daughter's desk.Hope this helps. |
Question: | Has anyone tried taking them off? Do they leave residue on wood tables |
Answer: | They use 2 sided 3M tape to stick them on. When you take them off they do leave some sticky residue, however it is relatively easy to remove with some acetone (nail polish remover). |
Question: | Will these pull the paint or finish off furniture upon removal |
Answer: | I've only used them on wooden, varnished coffee and dining tables. They did not pull the finish off those, despite being ripped off a number of times. The sticky tape is pretty strong, but not super strong so I doubt it would pull off paint unless the patin work was extremely delicate. |
- HEAVY-DUTY PREMIUM RUBBER FOAM: Thick, dense and soft - maximum impact absorbent.
- CLEAN SAFETY: Roving Cove uses safe and pure raw material and was the first brand to make foam safety bumpers without the use of toxic flame-retardant chemicals (SCCPs). Our corner protector contains no BPA, no phthalates, no heavy metals, no latex, no SCCPs. Inherently flame-resistant; passed flammability tests under US regulations.
- DENSEST: Density is more important than thickness; when it comes to softening impact. Roving Cove corner guards measure Shore A 20-N density, much more than the industry standard of 13. Soft, high-density, premium corner cushions absorb impact and protect your loved ones from the sharp corners and edges in your home (nursery, kitchen, fireplace, coffee table), school, daycare, preschool, hospital, senior facility, nursing home, factory, office, museum, restaurant, hotel and more.
- SECURE ADHESION: Includes authentic, easy-to-peel, premium 9448A 3M double-sided tape on PRE-TAPED corner cushions. Onyx color goes well with dark oak, dark walnut, ebony, mahogany, dark cherry, or black, granite or dark-colored furniture, such as tables, chairs, chests, shelves, stairs and fireplaces/hearths.
- DESIGNED IN USA: Includes 8 premium, pre-taped, baby proofing corner guards. All text and photos/images in this product listing are copyrighted materials. Copyright: 2012-2020 Mayapple Baby LLC, Brooklyn NY, USA.
User questions & answers
Question: | Can these be used on outdoor furniture? Handle rain or heat well |
Answer: | No indoor use only. You can but I’m in fla and they wouldn’t last 2 months here outdoors. The adhesive isn’t great to begin with . I had to use gorilla adhesive caulk to them on my wood bed frame. They are small 1 1/2 inch thick x 3 inch wide(length) |
Question: | Will this work for a hanging cupboard |
Answer: | if it has a corner then it will 100% work. |
Question: | Can they be used for the corner of a bed |
Answer: | Hi Carol, Yes, our Safe Corner Cushions can be used on the corner of a bed. Make sure you read the instructions and apply the double-sided tape along the very edges of the cushions before sticking the cushions onto your furniture. You can always email or call us for more information. Thank you,Mayapple Baby | Rovimg CoveBrooklyn, NY |
Question: | Does the sticky part every damage wood tables or leave residue when removed |
Answer: | No, at least not now. I have had it placed for three months and I had to remove it from one corner and the sticky part can be taken away without any damage to the table. And there was no residue. |
Product description
-Protects child from bumps on corners of glass table tops or shelves -Clear to blend into surface better -New Curve Design to improve the effect of protection -Soft, Durable, Transparent material -Easy to install -Adhesive tape included -These corner cushions are special designed with a special curve to improve efficiently in absorbing impacts and lessening chances of serious injuries -Round and L with 3M sticker
- ✅ Protect your child from bumps on corners of glass table tops or shelves. Stick our Baby Corner Guards on furniture tops' sharp edges so you can focus more on enjoying every happy moment you spend with your child. The transparent, tasteful and rectangular design is made to flawlessly fit every corner without ruining anything! Besides, a large size provides all-round coverage of sharp corners, it is impossible for babies to swallow and no risk of asphyxiation.
- ✅ New Curve Design to improve the effect of protection. Clear to blend into the surface better than before.
- ✅ Secure & Eco-friendly Material - Baby proof corner guards are crafted with 100% non-toxic & odorless PVC materials, eco-friendly & free of heavy metals, sturdy & durable. Not easy to deform or tear even if repeatedly squeezed or pulled rubber corner guards.
- ✅ Easy 1 MINUTE Installation - No tools are required, and you can install child corner protectors in a short time. Just stick the adhesive to the baby corner protector and furniture, and then press for 1 minute. If you need to remove it, you can use a hair dryer to soften the adhesive so that it can be easily removed without sticky residue and will not damage the furniture
- ✅ LIFETIME GUARANTEE - We strive for the highest quality and best services to 100% guarantee your shopping experience. If you receive defective corner protectors, you can send it back without conditions and get a replacement for free.
- HEAVY-DUTY PREMIUM RUBBER FOAM: Thick, dense and soft. Maximum impact absorbent.
- CLEAN SAFETY: Roving Cove uses safe and pure raw material and was the first brand to make foam safety bumpers without the use of toxic flame-retardant chemicals (SCCPs). Our corner protector contains no BPA, no phthalates, no heavy metals, no latex, no SCCPs. Inherently flame-resistant; passed flammability tests under US regulations.
- DENSEST: Density is more important than thickness; when it comes to softening impact. Roving Cove corner guards measure Shore A 20-N density, much more than the industry standard of 13. Soft, high-density, premium corner cushions absorb impact and protect your loved ones from the sharp corners and edges in your home (nursery, kitchen, fireplace, coffee table), school, daycare, preschool, hospital, senior facility, nursing home, factory, office, museum, restaurant, hotel and more.
- SECURE ADHESION: Includes authentic easy-to-peel premium, 9448A 3M double-sided adhesive tape. Coffee Brown color goes well with oak, walnut, mahogany, cherry, or dark brown-colored furniture, such as tables, chairs, chests, shelves, stairs, bed frames and fireplaces/hearths.
- DESIGNED IN USA: Includes 4 premium, pre-taped, baby safety corner bumpers. All text and photos/images in this product listing are copyrighted materials. Copyright: 2012-2020 Mayapple Baby LLC, Brooklyn NY, USA.
User questions & answers
Question: | Our tables have a stone top. Will they adhere to the stone |
Answer: | They're not strong enough to adhere. They're made with poor quality. |
Question: | Are these suitable for exterior application? (UV, elements, etc |
Answer: | I do not believe they will withstand the sun, rain, or overall outdoor exposure to elements. The adhesive used to attach the corners may not continue to "stick". |
Question: | Are marks left behind when the tape is removed from the wooden furniture |
Answer: | I don't know because I won't be removing them for quite a while. However, they say not to affix this to things that have a weak finish. This indicates to me that the tape may not come off cleanly and may remove some of the finish that is on furniture that does not have a strong finish. I was concerned about this too and ultimately accepted that I was going to have to sacrifice some of the appearance on a few pieces of furniture. |
Question: | Is there a product you can recommend that would clean up the 3m tape residue when it's time to remove the protectors from furniture |
Answer: | Hi Katrina, This is from the blog post "How to Install and Remove Furniture Guards" on our website at www (dot) mayapplebaby (dot) com:If glue residue remains on the wood surface, use your finger tip to rub a few drops of vegetable oil, such as olive oil, onto the wood and work in circles until glue comes loose; use a paper towel to remove any remaining tape or glue. You may have to repeat this a few times. For surfaces other than wood, you could try using rubbing alcohol (first check the guidelines of that particular surface). We do not recommend using alcohol on wood surfaces.A shorter version of this is can be found in the instructions included in the Safe Corner Cushion pack.Thank you,Mayapple Baby / Roving Cove |
Product description
Corner guards Baby Proofing, Edge Corner Protector, Clear Furniture Edge Guard Child Safety Kit Soft Silicone Bumper Strip 10ft(3m) with Upgraded Pre-Taped Strong Adhesive Toddler Corner Protector(4 Pack)
Specifications
Color: Transparent
Material: soft PVC
Size of Edge protector stripbr> Length: 10feet (3 meters)or20 feet (6 meters)
Width: 0.4 inches (10 mm)
Size of Round Corner protector
Length: 1.65 inches (42 mm)
Width: 0.6 inches (15.3 mm)
Package includes
1 x 10ft(3m)/20ft (6m) edge protector strip (Pre-taped Adhesive)
4*Round corner protector /8* Round corner protector
1 x English Instruction
- 【UPGRADED PRE-TAPED ADHESIVE 10ft&20ft BUMPER STRIP】To save the installation time for customers, we have put the strong adhesive on bumper strip in advance. After the corners of the desk are wiped clean, simply peel off the double-sided tape and attach corner protector to the inside of the bumper corner, and then stick it to the corner of the desk until it is firmly pressed.
- 【SAFETY MATERIAL】 - The Furniture Safety Bumper is made of an eco-friendly, Food-Grade Safety and soft PVC material that is nontoxic and odor-free. It can help babies and seniors avoid injury from sharp walls and tables. Make sure safety and health for your babies and seniors.
- 【EASY Installation & REMOVE】Our strips can be easily scissor-cut for mounting at right or acute angles.And under our instructions, you can easily finish the installation by yourself.Custom-made adhesives provide greater retention, keeping the protector stays in place and does not fall off. Best of all, it can removes the residual trace without damaging the furniture.
- 【Practical and Transparent】 - The edge with an anti-tear layer which provides strong toughness. The Gorgeous Transparent PVC Material not only does not affect the the look of furniture of different colors but also Can be squeezed or pulled repeatedly and will not easy to deformed or tear, prevent the baby from being injured because of eating or chewing it.
- 【Furniture & More】 - Our bumper can be used on the desk, table, wall, any place with unfriendly corner or edge. It can be used in wood, glass, aluminum alloys, ceramic tiles, marble, metal, cement, etc.
User questions & answers
Question: | Will this damage marble |
Answer: | I would not think so. Mine is installed on a brick fireplace and a metal coffee table(except the bow edge) . It sticks on with 3M double sided tape which i do not think will cause damage. |
Question: | Can this edge guard stick to the table edge firmly |
Answer: | As long as it is used properly, I think it can stick very firmly. I suggest that you wipe the edges of the table clean and dry before using it, and then use double-sided tape to make it non-sticky. This edge corner protectorcan be glued firmly to the edge of the table with the supplied double-sided adhesive tape. (except the bow edge) It lasts for a long time.It sticks well and I’ve had it for a month now and it works great. |
Question: | does it leave anything behing when removed |
Answer: | With most furniture, the 3M double-sided tape should not leave any residue after the cushions are removed. If, for some reason, there is glue residue remaining, we recommend rubbing a few drops of olive or vegetable oil and wiping with a cloth. This may have to be repeated once or twice. The oil shouldn't harm your furniture. We don't recommend using other solvents. |
Product description
Kmeivol Soft and Comfortable Corner Protector
The corner protector baby can prevent baby's head and eyes from being hit by any table corners.
Transparent material of corner protectors for furniture can maintain the original look of your furniture, and the rounded corner design makes the product smoother and softer.
The table corner protectors for baby should be used under adult's supervision, all of them are tested under strict US regulations, BPA free.
The baby proofing corner guards are suitable for different materials and easy to use. The powerful adhesion could prevent the baby from tearing it off.
How to Use It?
Clean the surface of the furniture without stains and dust.
Apply strong adhesive. After removing the protective layer, do not touch the surface of the adhesive.
Stick on the corner of the furniture and press firmly, make sure the protector is stable enough for 24 hours.
Tips
They are daily necessities, not toys.
Replace immediately after loosening.
Small parts -- To avoid choking hazard, please keep the unused products out of the reach of children, especially under 3 years old!
Specifications:
Color: Transparent
Material: PVC
Weight: 0.02 pounds
Dimensions: 1.14 * 0.98 * 0.98 inches
Package Included:
12 * Corner Protector
36 * Adhesive
- Premium Quality Material: The corner protector is made of high quality PVC material, BPA free. They are produced and tested under a strict standard, do not have a severe irritating odor, ensuring your comfort when using.
- Clear and Transparent: These corner protector baby are transparent, which can clearly show the texture of the furniture and make it more beautiful. The rounded corner design makes corner protector’s surface smoother and softer.
- Widely Use: Our corner protectors for furniture are also suitable for different materials, such as wood, glass, table, cabinet, refrigerator and so on.
- Easy Installation: The table corner protectors for baby are simple to install and no tool required. Just stick the attached adhesive tape, remove the covering and install it on the table corner.
- Strong Adhesion and No Stain Residue: The baby proofing corner guards have powerful adhesion, which can cover the interior as a whole and support kilograms of force. A hair dryer would remove it easier without leaving a residue.
Latest Reviews
View all
Non Skid Toddler Socks
- Updated: 09.07.2023
- Read reviews

Miyang Tag Bathing Suits
- Updated: 12.03.2023
- Read reviews

French Fry Blades
- Updated: 28.02.2023
- Read reviews

Kuzy Kb Covers Keyboard Cover
- Updated: 02.06.2023
- Read reviews

Tough 1 Fly Masks
- Updated: 31.05.2023
- Read reviews