12 best oem tools steering wheels

Product description

The OEMTools Steering Wheel Puller is designed to pull the steering wheels on many major makes and automobiles. This Steering Wheel Puller includes: Yoke, Pressure Screw and Three Sets of Pulling Screws with Washers and Swivels. Also, this Puller comes in a sturdy blow-mold storage case.

From the Manufacturer

The OEM 27017 Steering Wheel Puller is designed to pull the steering wheels on all major makes of automobile. This set includes yoke, pressure screw and three sets of pulling screws with washers and swivel. Comes in convenient blow-molded case for easy storage. Sizes include 5/16-inch x 18, 5/16-inch x 24 and 3/8-inch x 16.

• Designed to fit many major makes and automobiles
• Bolt sizes include: 5/16 Inch x 18, 5/6 Inch x 24, and 3/8 Inch x 16
• Comes in a sturdy blow-mold storage case
• Steering wheel puller set
• Set includes yoke, pressure screw, 3 sets of pulling screws with washers and swivel sizes 5/16-Inch by 18, 5/16-Inch by 24, 3/8-Inch by 16
• Heat treated for strength
• Comes in sturdy blow mold storage case
• Applicable for professional auto mechanics as well as heavy duty applications

User questions & answers

Question:	Will this fit on a 2002 dodge dakota
Answer:	The set here is the 2019 version and will NEVER be made again. The set at Target is most likely the 2020 version, which is very common right now.
Question:	Will this work on a chevrolet pickup
Answer:	Cmon man, it’s a Hotwheel Car, they’re all basically the same size give or take a bit🙄
Question:	Will this puller work on mopars, specifically 1974 dusters? Thanks in advance
Answer:	No they do not. All doors and hoods are affixed.
Question:	Will this work on a 2008 Avalanche
Answer:	its on the back of the package. Pagani Huayra Roadster, Lamborghini Sesto Elemento, Lamborghini Gallardo LP 570-4 Superleggera, Lotus Esprit S1, and Aston Martin V8 Vantage. I bought these for my grandson.

Product description

The OEMTOOLS Steering Wheel Puller Leg Kit works on many General Motors when there are no threaded holes provided on the steering wheel.

• Steel Construction for Durability
• Package Dimensions: 3.3 L x 16.5 H x 4.1 W (centimeters)
• Package Weight : 0.499 kilograms
• Country of Origin : Taiwan, Province Of China

Product description

"When you’re working on a vehicle in your garage or shop, you need tools that are tough on the job but gentle on your car. The OEMTOOLS 25134 Steering Wheel Lock Plate Remover, Standard Yoke is an essential tool for compressing steering wheel lock plates. The reversible adapter includes 9/16"" - 18 and M14 - 1. 5 threads, so you have everything you need for the task at hand. The extended yoke services both tilt-wheel and telescoping columns. For longevity, this tool is crafted from durable steel that is heat-treated for extra strength.



OEMTOOLS has always created products with top quality, innovation, and value. This wheel lock plate remover is no different. However, if something happens to it during normal, everyday use, there’s no need to stress about it. This product is covered by the reliable OEMTOOLS Limited Lifetime warranty. Be sure to read the product manual for the complete warranty conditions and restrictions.



SPECIFICATIONS

- Reversible adapter includes 9/16"" - 18 and M14 - 1. 5 threads

- Heat-treated steel material "

From the Manufacturer

The Steering Wheel Lock Plate Remover is for easy removal and installation of lockplate snap rings when servicing steering wheel columns. The extended yoke services both tilt-wheel and telescoping columns. The adapter is reversible with 9/16-inch x 18 on one side and 14mm x 1.5 on the other.

• Steering wheel lock plate remover for easy removal and installation of lock plate snap rings
• Works on tilt and telescoping columns
• Metric and standard adapter
• Heat treated for strength
• Applicable for professional auto mechanics as well as heavy duty applications
• Steering wheel lock plate remover for easy removal and installation of lock plate snap rings when servicing steering wheel columns
• Works on tilt and telescoping columns

User questions & answers

Question:	Is there anything else he would need working on an S
Answer:	This will work on steering wheels that use a two bolt pattern. If yours is a three bolt pattern in the formation of a Y it will not work for you.
Question:	Will this tool work with standard steering wheel column with out tilt
Answer:	I purchased one for my 2009 Suburban and ended up not needing it. Once you remove the nuts or bolts (can't remember which) you can pull on the wheel until it pops off.
Question:	Will this work for non telescopic or non tilt steering wheel
Answer:	The body is plastic.
Question:	Will this work on 1994 camaro
Answer:	There is only the vehicle shown

Product description

OEM steering wheel holder and pedal depressor kit features two applications. 1) it holds the steering wheel in position for alignment adjustments. 2) it depresses the brake pedal for various brake checks, including brake lamp operation.

• Holds steering wheel in position for alignment adjustments
• Depresses Brake pedal for various Brake checks including Brake Lamp operation
• Rod easily slides in actuator for fast easy installation of tool on Brake pedal or steering wheel
• Simply hand squeeze the actuator to accomplish fine adjustments
• Kit Includes actuator assembly extension rod for actuator hook assembly and flat pad

Product description

The OEMTOOLS Steering Wheel Puller is designed to pull steering wheels on all major makes of automobiles. The set includes puller, puller screws, puller nut, and washers.

From the Manufacturer

This Steering Wheel Puller is for use on all major makes of automobile. This set includes yoke, pressure screw and three sets of pulling screws with washers and swivel. Sizes include 5/16-inch x 18.5, 5/16-inch x 24, and 3/8-inch x 16

• Set Includes: Yoke, Pressure Screw, 3 Sets of Pulling Screws with Washers and Swivel
• Includes Sizes: 5/16 in. x 8, 15/16 in. x 24, and 3/8 in. x 16
• Comes in Sturdy Blow-Mold Storage Case
• Designed to pull steering wheels on all major makes of automobiles
• Durable and long lasting

Product description

The OEMTools Harmonic Balancer Puller Kit is used to remove many harmonic balancers, vibration dampers, pulleys and gears. This Kit has all of the features and benefits of the OEM No.27019 Harmonic Balancer set with additional bolts. Kit includes: three black oxide plated 3/8-Inch by 2-Inch fine 24-pitch bolts, three nickel plated 5/16-Inch by 2-Inch 18-coarse pitch bolts, three zinc chromate plated M8-1.25 by 80 mm metric bolts and three black oxide plated 3/8-Inch-16 by 4-Inch coarse bolts. Kit also includes Bolts for GM 3300 and 3800 V6 engines. Note: Before removing the harmonic balancer it may be necessary to remove the radiator. Comes in a sturdy blow-mold storage case.

• Includes special sholder bolts for GM 3300 & 3800 V6 engines
• Fits many automotive applications where a thread hole puller is needed
• Two way slotted yolk
• Comes in a sturdy molded plastic storage case
• Used to remove many harmonic balancers, vibration dampers, pulleys, or gears
• Includes bolts for GM 3300 & 3800 V6 Engines
• Comes in a sturdy blow-mold storage case

User questions & answers

Question:	Would this work to pull flywheel on lawn mower engines
Answer:	Yes I don't see why not
Question:	What grade bolts are these? Are they hardened
Answer:	yes it should. Used mine on 85 C10. The collar can flip which has different thread pattern. Collar is the part at the end of the threaded shaft.
Question:	work on chevy
Answer:	Pop off your horn switch and make sure it has 2 holes to screw into. If it does, odds are it will or you could probably rig it to work. I bought this for a 76 land cruiser and that was a long shot but it works. Comes with a couple different adapters
Question:	will this work on a 1991 yamaha VMAX flywheel
Answer:	It should. It worked perfectly on my 1965 Chevrolet Corvair.

Product description

The OEM TOOLS 27213 Master Wheel Hub and Bearing Remover and Installer Kit is a universal hub and bearing removal tool kit and installer for front, rear, and all-wheel drive vehicles. This wheel bearing press kit has been thoughtfully designed to be easy to use, even on seized wheel hub and bearing assemblies and internal bearings. With the innovative self-centering mechanism, and a heavy duty roller thrust bearing that extends the life and power of the center screw, there’s no easier way to remove and replace wheel hubs than with this wheel hub and bushing removal tool kit. And because there’s no hammer or slide hammer required, this wheel hub kit is much safer for your car than the old way of doing things. If you own a BMW, Porsche, Mercedes Benz, or Volkswagen, there’s basically no other wheel hub tool set out there that can remove and replace all four of your vehicle’s wheel hubs. The OEMTOOLS 27213 Master Wheel Hub and Front Wheel Bearing Removal Kit and is useful for all makes and models, and is an absolute lifesaver for German cars. This is the most heavy duty front hub puller bearing removal kit. This hub assembly puller kit is designed to last. Whenever you need a bearing extractor or a bearing installer, you'll find yourself reaching for this wheel bearing adapter kit. HUB BEARING PULLER KIT INCLUDES: Hub puller tool and wheel bearing remover tool. Adapter shoes. Pusher washers. Receiver sleeves. Nut-bolt. Heavy Duty Bearing.

• NO SHOP PRESS NEEDED: The OEMTOOLS 27213 Master Wheel Hub and Bearing Remover and Installer Kit saves time removing even seized-up wheel hub and bearing assemblies, and allows mechanics to install inner wheel bearings without a shop press
• FOR PROFESSIONAL AND DIY MECHANICS: This wheel bearing puller/installer is one of the only tools for servicing front and rear wheel hubs and bearing on German cars, and makes installing wheel hubs and bearings on most vehicles much easier
• UNIVERSAL APPLICATION: This wheel bearing removal tool features all the adapters needed to service a number of foreign and domestic vehicles, remove and replace wheel hub and bearing assemblies, and internal wheel bearings—BMW, Porsche, VW, and more
• SLIDE-HAMMER-FREE REMOVAL: This wheel bearing tool and hub press makes it simple to remove and install wheel hub and bearing assemblies as well as inner bearings without the use of a hammer or a shop press; Widely compatible wheel bearing tool kit
• WHEEL HUB PULLER KIT INCLUDES: Hub removal tool, Front wheel bearing adapters, Pusher Washers, Receiver Sleeves, Nut-Bolt, and Heavy Duty Bearing

User questions & answers

Question:	Does it come with a warranty
Answer:	yes it will
Question:	How does this compare to the sir b-90 master kit? and does it come with an instruction manual for rr procedures
Answer:	This puller will not work on that type of flywheel. Check with your local Yamaha dealer.
Question:	I bought this item and will receive it soon. anyone know if this will work on my 1996 porsche 993 to r&r the hub and bearings on the rear without remo
Answer:	It should work on most GM products
Question:	What are the driver disk sizes
Answer:	Again...depending on what your doing? It's not a wheel puller...

Product features

OEMTOOLS 27213

The OEMTOOLS 27213 Master Wheel Hub and Bearing Remover and Installer Kit is an easy-to-use universal hub and bearing removal tool kit and installer for front, rear, and all-wheel drive vehicles.

Works on Front, Rear and All-Wheel Drive Vehicles

Application: Most make and models of domestic, European and Asian vehicles where the hub and or bearing are pressed.

Comes in Plastic Blow Mold Case

Includes: Adapter shoes, pusher washers, receiver sleeves, nut-bolt, and heavy-duty bearing.

Easiest and Safest Way to Remove and Re-Install Wheel Hub and Bearings

With its self centering design and powerful pressure screw, our Wheel Hub and Bearing Remover and Installer Kit is the easiest and safest way to remove and re-install wheel hubs and bearings. No need to use a slide hammer or a shop press.

Product description

Automotive power steering and brake systems have a tendency to trap air in components and lines, causing erratic steering, braking, screaming pump noise, and potential damage to critical parts. It makes sense; any hydraulic system will rely on powerful vacuums to move large amounts of fluids very quickly, and if there are any parts that aren’t air tight, that strong vacuum will simply suck more and more outside air into the system. When coupled with a hand vacuum pump the OEMTOOLS Power Steering and Bleeder Kit will allow user to help remove trapped air in Power Steering and Brake System components and lines. The hand pump acts as a gentle second vacuum in the system. As you pump the fluid powerfully through your lines—either by pumping your breaks or turning your wheel from lock to lock—the hand pump gently removes trapped air from your lines as the fluid rushes past. FULL SPECIFICATIONS: - Works with a hand vacuum pump that can be coupled to the adapter to exert a vacuum on the fluid’s surface in the reservoir - 2 EPDM tapered rubber adapters to fit most power steering pumps and reservoirs - Reservoir bottle to protect hand vacuum pumps from pulling through fluid - 3 sizes of brake bleeder adapters - Detailed power steering and brake system fluid bleeding instructions - Blow mold carrying case

• EASY TO USE BLEEDER TOOL: Works with a hand vacuum pump (OEMTOOLS 27010) that can be coupled to the adapter to exert a vacuum on the fluid’s surface in the reservoir
• ADAPTERS FOR MULTIPLE POWER STEERING SYSTEMS: 2 adapters form an airtight seal in the neck of a vehicle’s power steering pump
• REMOVE AIR FROM AUTO FLUIDS: Help to eliminate trapped air following repairs or fluid changes
• ADAPTERS FOR BRAKE SYSTEMS: Includes 3 sizes of brake bleeder adapters
• EASY INSTRUCTIONS INCLUDED: OEMTOOLS 27311 Power Steering and Brake Bleed Kit comes packed in a blow mold organizational carrying case and includes easy to follow instructions for both power steering and brake system bleeding
• Fit Type: Universal Fit

User questions & answers

Question:	So. the o-ring fell out of the cup and got lost the second time i used it. where can i get another one
Answer:	Go to your local auto parts store such as O’Reilly’s and being the container. Ask for the box of assorted o rings and you’ll be able to go through them and pick which one best suites your needs.
Question:	Can I get close up pics of the black rubber pieces to see if will work with my 2001 dodge Durango
Answer:	The skinny rubber piece measures about 3/4 of an inch on the bottom and a little bit over 1 1/2 inch on the top. The big rubber piece measures 1 5/8 inches on the bottom and just about 2 inches on the top. Hope that helps since you can’t post pictures in these answers.
Question:	Will this fit on a 1993 mustang lx with a 2.3l engine? do you sell the hand vacuum pump as well
Answer:	Fit of tool adaptor to the pump filler hole not known for this car. However, physical filler bung adapter supplied with my purchase was not soft enough to seal the filler hole. Had to buy a filler cap and modify for vacuum hose fitting....
Question:	Does this come with the hard storage case
Answer:	Yes.

Product description

"Ball joint replacement is a very common job, especially as the average age of cars on the road today is increasing. While this is a common job, most traditional methods require a pickle fork and a lot of manual labor. The OEMTOOLS Hydraulic Ram Ball Joint Separator makes the job easier and safer. By utilizing a hydraulic ram, this tool provides even and constant pressure until the ball joint separates. The hydraulic ram provides constant, even pressure to the ball joint until separation. Using this tool, the user reduces the risk of projectiles, hammer strikes or pinch points. No pickle fork means no damage to existing components, saving you money on replacement parts.



OEMTOOLS provides products with top innovation, quality, and value. However, if anything happens to your ball joint replacement tool during normal, everyday use, then there’s no need to stress out about it. It should be covered by normal, everyday use. However, be sure to read the product manual for the complete warranty conditions and restrictions.



SPECIFICATIONS

- 22mm jaw width

- Capacity of 56mm

- Applies up to 8 tons of pressure "

• NO MORE PICKLE FORKS, NO AIR TOOLS NEEDED, MINIMAL EFFORT: Simply rotate the large forcing screw until the jaws are seated on the ball joint. Then, rotate the small hydraulic forcing screw using a ratchet or wrench until separation
• RATED TO 8 TONS: Designed for power and efficiency, the small hydraulic forcing screw displaces fluid in the large forcing screw, applying up to 8 tons of pressure on the ball joint
• UNIVERSAL APPLICATION: Jaw width of 22mm and capacity of 56mm allows for use on most passenger vehicles on the road today
• NONDAMAGING—SAVE MONEY ON REPLACEMENT PARTS: Unlike pickle forks or other ball joint separators, this tool will separate ball joints without damaging the dust boot or ball joint, allowing reuse of components
• SAFER FOR THE TECHNICIAN: The hydraulic ram provides constant, even pressure to the ball joint until separation. Using this tool, the user reduces the risk of projectiles, hammer strikes or pinch points
• Fit type: Universal Fit

User questions & answers

Question:	What size socket is required for the manual version
Answer:	I think the odds are good, but can't confirm 100%. It's a very complete kit and had the parts/sizes I needed to do the rear bearings on 986 S model. There are a lot of varied sizes to choose from when doing the job. It was a HUGE time saver.
Question:	Unfortunately the opening of this one is too small for my Gen 3 Outback. Are there similar tools with wider or adjustable opening
Answer:	Don't know the exact sizes of the disks. They are all identified by letters. I had to match up disks to the bearing i was trying to remove which took a few minutes and than I was off to getting a bearing and wheel hub removed and new one installed in about an hour.
Question:	what is the fork opening
Answer:	It might work if the flywheel has threaded puller holes 2-4” apart (approximately). It is not made to hook on the outside of anything to pull it off.
Question:	Will this work on larger vehicles? Trucks and suv
Answer:	I think their grade 5 but they worked fine.

Product features

OEMTOOLS 25219 Hydraulic Ball Joint Separator

Hammering away at ball joints is a technique of the past—the OEMTOOLS 25219 Hydraulic Ball Joint Separator provides the professional with a safe and effective system to separate ball joints. Equipped with a hydraulic ram rated to 8 tons, this tool will stand up to the toughest jobs. Still working hard on ball joint jobs? Work smarter with OEMTOOLS.

Product description

Easily install most truck wheel studs. OEMTOOLS is the leading manufacturer of specialty tools, equipment, and shop lighting - designed for the professional and DIY mechanic. Before working in the garage or under the hood, remember one word: OEMTOOLS.

• Designed to work on truck wheel studs up to 22 mm (7/8") in diameter
• Equipped with a heavy duty thrust bearing to easily pull the new wheel stud into place
• Use with an impact wrench or ratchet
• Great value

User questions & answers

Question:	Will it work on a 2001 Town and Country
Answer:	The opening is 7/8"
Question:	Will this work on a Bobcat Skidsteer
Answer:	It wasn't big enough for my Subaru, so it's unlikely it'll work on a truck.
Question:	What is the Biggest Stud size they will fit? Thank you
Answer:	Lifetime
Question:	will this work on a 04 trailblazer ext
Answer:	I can not attest to whether or not the sir b-90 is as good, better, or worse. I can tell you this tool did the job on my 98 328i bmw like a breeze. And the half shafts took a sledge to get out, so stuff was well set and rusted. 340000k plus miles. Id say i did each side in 15 to 20 min. It does have an instruction manual as well, and shows how you can use the tool multiple ways for the same job. So incase one wat is to tight tolerance or something you have options! Hope this was helpful!

Product description

A must for every shop. The OEMTOOLS Professional 6 Wheel Creeper has a concave design and ultra-low ground clearance that allows you to roll under your vehicle comfortably. The concave design, along with the comfortable shoulder rest, gives your shoulders ample clearance and cushioning to keep you comfortable and allow you full range of motion while you’re working beneath a vehicle. It’s molded from a durable solvent-resistant plastic and designed to last, job after job. In every way, we’ve built this 6 Wheel Creeper to be a powerhouse work tool for professional mechanics. Take it for a spin, and we’re positive it’ll be your go-to daily rolling creeper. You spend a lot of your time underneath vehicles—you might as well be comfortable. FULL SPECIFICATIONS: - Durable solvent resistant plastic build - Ergonomic design - 4 Tool storage trays - 6 Heavy duty TPU casters - Low ground clearance - 3D Streamline design for shoulder clearance - Foam shoulder pad and headrest - Slot in base for easy carrying and hanging for storage - Weight capacity: 300 Lb. - Dimensions: 41 inch x 20 inch

• COMFORTABLE AND USEFUL: Ergonomic concave design for comfort, clearance, and mobility; Foam shoulder pad and headrest for added comfort
• DESIGNED TO HELP GET WORK DONE: Four tool storage trays—one on each side of the creeper and one on each side of the headrest; Low ground clearance allows for greater mobility and clearance while you’re under a vehicle; 3D streamline design for shoulder clearance; Slot in base for easy carrying and hanging for storage
• SMOOTH MOVEMENT: 6 heavy duty TPU casters roll easily and are resistant to oil, grease, and abrasion; Built with a low profile to easily fit under nearly any vehicle
• HEAVY DUTY: 41 inches x 20 inches, with a weight capacity of 300lbs; Durable plastic build; Designed for work
• FULL SPECIFICATIONS: Durable plastic build; Ergonomic design; 4 Tool storage trays; 6 Heavy duty TPU casters; Low ground clearance; 3D Streamline design for shoulder clearance; Foam shoulder pad and headrest; Slot in base for easy carrying and hanging for storage; Weight capacity: 300 Lb. ; Dimensions: 41 inch x 20 inch

User questions & answers

Question:	How do I contact the seller
Answer:	Yes it should
Question:	How much weight can it hold
Answer:	3/4
Question:	What is the warranty on this made-in-China thing
Answer:	Technically, yes, but not on Amazon. Also, the bigger ones won't work on your outback, because they are too big. I suspect you are using it wrong - I've never found any car it won't work on, even stuff with much larger u-joints than yours.

Product description

The OEMTOOLS 27031 Power Steering Pulley Puller and Installer is a professional-quality specialty automotive tool designed to pull small pulleys—and to do it better than any other power steering pulley puller installer out there. The power steering pump pulley puller works on most domestic power steering pulleys. Our pulley puller kit includes two screws for use on most Ford, Chrysler, GM, and VW power steering pulleys with Saginaw, Thompson, and Ford C111 and C2 power steering pumps. This power steering pulley puller kit also pulls pulleys on GM belt-driven vacuum pumps and pressed-on water pump pulleys of GM V6 engines. Our power steering pulley remover kit comes in a molded carrying case for easy transport and convenient storage. Mechanics who regularly perform power steering repairs will love the way the OEMTOOLS 27031 Pulley Power Steering Tool simplifies their work, making both pulley pulling and pulley installation much easier. The pulley removal tool’s all-steel construction makes it uniquely suited to remove stubborn or seized-up pulleys, holding up well against wear and tear. This is a pulley puller and installer kit that you can count on to be there every time you need it.

From the Manufacturer

The OEMTOOLS Tail Pipe Expander 1-1/2 Inch x 2-7/16 Inch used to expand tailpipes so that aftermarket mufflers and tailpipes can be fitted to the exhaust system. It features an alloy steel construction for strength and durability.

• POWER STEERING PULLEY INSTALLER AND REMOVER: Our power steering pulley tool is designed to remove and install power steering pump pulleys on most domestic vehicles; Power steering pulley remover pulls pressed-on water pump pulleys of GM V6 engines
• WORKS WITH MANY VEHICLES: This power steering pump pulley tool comes with two screws for use on most Ford, Chrysler, GM, and VW power steering pulleys with Saginaw, Thompson and Ford C111 and C2 pumps; Pulls pulleys on GM belt-driven vacuum pumps
• HEAVY-DUTY POWER PULLER: The pulley clamp and removal screws in this OEM pulley puller installer kit are composed of rugged steel for long-lasting strength and durability; Power steering pump pulley installer designed to tackle any small pulley job
• CONVENIENT STORAGE: Our power steering puller and installer set comes in a molded carrying case for safe storage and easy portability; Take this power steering pump puller/installer from job to job while keeping your puller kit organized
• PRODUCT SPECIFICATIONS: Pulls any pulley with hub diameters measuring 1-1/8, 1-1/4, 1-5/16, or 1-3/8 inches; Pulls pulleys on GM belt driven vacuum pumps; Pulls pressed-on water pump pulleys of GM V6 engines

User questions & answers

Question:	Will this work on a 1994 F150 power steering pump
Answer:	i didn’t buy one
Question:	Power steering pump pulley installation and removal 86 Chevy Monte Carlo
Answer:	Not sure, I used it on my 1993 dodge 150 pickup.
Question:	Does it come with a clamshell case? Top, bottom, and latch
Answer:	It is for heavy duty trucks and trailers with 7/8 diameter hub mount studs. The bore on this tool is 7/8" and both sides are flat so if you have tapered/beveled lug nuts it will not work.
Question:	I ordered 2 of these kits and both at missing part h (3/8 inch x 16 / 8mm x 1.25 bolt). is this no longer included in this kit
Answer:	Only work on vehicles up to one ton and they fit

Product features

A Sturdy Pulley Installer

If you are installing a pulley system, this tool set by OEMTOOLS fits pulleys with multiple hub diameters. The OEMTOOLS 27031 Pulley Puller/Installer comes with molded storage carrying case to keep all of the accessories safe and in one place. Made with top quality materials, the screws for pulleys are super durable and sturdy.

An Excellent Tool Kit

The OEMTOOLS 27031 Pulley Puller/Installer is well-made with an impressive case. Making all though jobs simple and easy, you will be able to install or remove pulleys in no time. Although, installing a pulley could be time consuming, you will be able to do that job faster with this tool set by OEMTOOLS.

Remove or Install Power Steering Pump Pulleys

With clear instructions on the case, you will easily be able to install or remove power steering pump pulleys on most domestic vehicles. You will also be able to follow the safety instructions on the case as there are clear and concise step by step points available.