13 best toyota scissor lift jacks

Product description

The Lead Brand scissor jack is 1.5 Tons (about 3,307 lbs) .

It can be used when you need to repair the tire.

The compact size and small volume can be easily to preserve.

The raise of maximum height is 385mm(15.16") and it suits for most sedans.

Collocating with wrench can lift the car easily.

The thickness of steel is 3.1mm(0.12") and the net weight is 2.76kg(6.08 lbs) .

After testing the plant summed that the scissor jack can lift the car which is 1.5 Tons(3,307 lbs).

The utmost is 1.6 Tons(3,527 lbs).

Comparing with hydraulic jack, the scissor jack is conveniently and easily to operate.

The product highlight is our saving strength design,it can let you feel easy to operate the scissors jack.



Usage Method:

1. Fasten the rest three tires using pads or bricks

2. Turn the jack by hand until the jack elevate the vehicle botton.

3. Put the ratchet wrench into the jack, and then turn the wrench. After that we can elevate the jack.

4.Adding engine oil (not included) into screw of Jack, it can make the screw rotation more smoothly, and reduce the jack noise.

• Net weight :2.86kg(6.3 lbs), Lift range from 4.09 inches to 15.15 inches
• With the scissor jack you can easily and quickly adjust the height of your vehicles. Thanks to the handy ratchet handle and the smooth-running spindle, changing tires is child's play from now on.
• The solid base plate also ensures a secure footing, corrosion-resistant, Strong metal construction made of steel, withstands high pressure
• Ratchet handle Saving Strength and Stable Design

User questions & answers

Question:	Will this work for my 2008 Ford Edge
Answer:	eBay, their overseas sellers are setup to meet this type of demand.
Question:	Will this work for my Kia Sorento
Answer:	Check this URL: https://en.wikipedia.org/wiki/JST_connector It's Wikipedia and has specs for every JST connector available. This kit is the SM series.
Question:	Will this work for a Toyota Prius
Answer:	These are only connectors. as long as you don't exceed the connectors limit. its up to you on how or what circuit you are going to use it for. Hope i helped you out
Question:	Made in China
Answer:	Yes

Product description

Package included:

Scissor jack x 1

Handle x 1



Specification:

Condition: Brand new

Minimum height: about 105MM

Maximum height: approximately 385MM

Lifting: 2T

Color: Black

Material: Steel

Net weight: 2.1KG

Item Size: 41*8.8*9 CM



HEIGHT/CAPACITY CURVE

This device is designed to sustain the following loads at these specified heights. DO NOT EXCEED the rated capacity for each position.

Before Use

1. Check before each use for abnormal conditions such as cracked welds, leaks, damaged, loose or missing parts.

2. Inspect the jack immediately if lift is believed to have been subjected to an abnormal load or shock.

3. If the jack is found to be damaged, it should be removed from service until properly repaired.



OPERATING INSTRUCTIONS

1. Insert the jack handle into the hole of the handle socket.

2. Make sure that the saddle is correctly positioned. To prevent damage to the jack, do not move the jack while the handle is intact in the socket.

3. To raise load, use one hand to hold the front part of the handle and use the other hand to turn at the rear and of the handle clockwise.

4. To lower load, use one hand to hold the front part of the handle and use the other hand to turn at the rear and of the handle counterclockwise slowly.



CARE AND MAINTENANCE

1. When jack is not in use, lifting arm should be in full down position.

2. Always keep jack clean and keep the screw and bearings well lubricated.

3. Store the handle with care.

• 1. Lifting Range:4.2 inch - 15 inch (105mm - 385mm)
• 2. High Quality Material. Heavy duty construction rated to 2 tonne capacity.
• 3. Item Size (CM): 41 x 8.8 x 9. User can easily store it along with other tools in your car boot space.
• 4. Suitable for small and medium sized vehicles. Such as: cars, Toyota, Nissan, Kia, Buick, Santana, BMW, Honda, Motorcycle, and much more.
• 5. US Local Shipping. Fast & Free Delivery.

User questions & answers

Question:	Is this jack suitable for a 2011 Camry
Answer:	flat single row 6 pin connector 15.36mm or 0.6045in or 77/128 in x 11/128in thick flat single row 5 pin connector 12.80mm or 0.5040in or 65/128in x 13/128in thick hope this answers your question Bruce

Product description

The scissor jack, with tooth gears, can extend from 90mm(close position) to 360mm, more than enough to lift most vehicles. Easy to operate using the chromed crank with speed handle.

Condition: Brand new

Minimum height: about 90MM

Maximum height: approximately 360MM

Lifting: 2.0T

Material: Steel

Net weight: 2.1KG

Item Size: 35*8.5*8.5 (L×W×T)

Scope: Suitable for small and medium sized vehicles. Such as: For cars/Buick/Santana/Vietnam and other vehicles.



Packing include:

Scissor jack * 1

Handle * 1



HEIGHT/CAPACITY CURVE

This device is designed to sustain the following loads at these specified heights. DO NOT EXCEED the rated capacity for each position.

Before Use:

1. Check before each use for abnormal conditions such as cracked welds, leaks, damaged, loose or missing parts.

2. Inspect the jack immediately if lift is believed to have been subjected to an abnormal load or shock.

3. If the jack is found to be damaged, it should be removed from service until properly repaired.



OPERATING INSTRUCTIONS

1. Insert the jack handle into the hole of the handle socket.

2. Make sure that the saddle is correctly positioned. To prevent damage to the jack, do not move the jack while the handle is intact in the socket.

3. To raise load, use one hand to hold the front part of the handle and use the other hand to turn at the rear and of the handle clockwise.

4. To lower load, use one hand to hold the front part of the handle and use the other hand to turn at the rear and of the handle counterclockwise slowly.



CARE AND MAINTENANCE:

1. When jack is not in use, lifting arm should be in full down position.

2. Always keep jack clean and keep the screw and bearings well lubricated.

3. Store the handle with care.

• The scissor jack, with tooth gears, can extend from 90mm (close position) to 360mm, more than enough to lift most vehicles. Easy to operate using the chromed crank with speed handle.
• Scope: Suitable for small and medium sized vehicles. Such as fits Buick/Santana/Vietnam/honda and other vehicles.
• Minimum height: about 90MM; Maximum height: approximately 360MM.
• Lifting: 2 tonne Color Black High Quality Rust-Proof Steel.
• We Are The Factory Who Specialize In Producing The Car Accesories Many Years! High Quality & Good Service!With 2 Years Warranty and Friendly, Easy-to-Reach Support. Buy with Confidence!

User questions & answers

Question:	Is the size in cm, mm, or what? need inch size! listed as; item size: 35*8.5*8.5 (l×w×t
Answer:	DO NOT BUY THIS PIECE OF CRAP!
Question:	Can I use for my 2012 Camaro please let me know thanks
Answer:	I don't think so. When it just arrived, it was not able to lift up my Altima for tire change. Also, the one I recieved has been used, and I got my refund for it. Good Luck!
Question:	Will this work on a 2007 chevy cobalt
Answer:	DO NOT BUY THIS PIECE OF CRAP!
Question:	Can I use this jack for 2005 ford f
Answer:	It fits 2005 ford f150. Please don't worry, this is the universal scissor jack, perfect suitable for small and medium sized vehicles. Such as: Ford/Buick/Santana/Vietnam and other vehicles.

Product description

Package included:

Scissor jack x 1

Handle x 1



Specification:

Condition: Brand new

Minimum height: about 105MM

Maximum height: approximately 385MM

Lifting: 2T

Color: Black

Material: Steel

Net weight: 2.1KG

Item Size: 35*8.5*8.5CM



HEIGHT/CAPACITY CURVE

This device is designed to sustain the following loads at these specified heights. DO NOT EXCEED the rated capacity for each position.

Before Use

1. Check before each use for abnormal conditions such as cracked welds, leaks, damaged, loose or missing parts.

2. Inspect the jack immediately if lift is believed to have been subjected to an abnormal load or shock.

3. If the jack is found to be damaged, it should be removed from service until properly repaired.



OPERATING INSTRUCTIONS

1. Insert the jack handle into the hole of the handle socket.

2. Make sure that the saddle is correctly positioned. To prevent damage to the jack, do not move the jack while the handle is intact in the socket.

3. To raise load, use one hand to hold the front part of the handle and use the other hand to turn at the rear and of the handle clockwise.

4. To lower load, use one hand to hold the front part of the handle and use the other hand to turn at the rear and of the handle counterclockwise slowly.



CARE AND MAINTENANCE

1. When jack is not in use, lifting arm should be in full down position.

2. Always keep jack clean and keep the screw and bearings well lubricated.

3. Store the handle with care.

• 1. Lifting Range:4.2 inch - 15 inch (105mm - 385mm)
• 2. High Quality Material. Heavy duty construction rated to 2 tonne capacity.
• 3. Item Size (CM): 35 x 8.5 x 8.5. User can easily store it along with other tools in your car boot space.
• 4. Suitable for small and medium sized vehicles. Such as: cars, Toyota, Nissan, Kia, Buick, Santana, BMW, Honda, Motorcycle, and much more.
• 5. US Local Shipping. Fast & Free Delivery.

User questions & answers

Question:	Will it fit in the Honda Element jack compartment
Answer:	It fits in my 90 accord compartment.
Question:	Will this work for 2014 Chevy Malibu
Answer:	Zero, punch your self in the face for a better decision than to get this crap.
Question:	Does it fit a 2017 acura rdx
Answer:	Yes, as long as it is under 3 tons. I have a '92 Ford Bronco and lifted it no problem, the jack works great. Hope this helps.
Question:	Does it fit in the 98 Accord jack compartment
Answer:	I bought one, whcih is made of firm metal. It writes ""Updated Version"" in features, i think they have upgraded their products.

Product description

Condition: Brand new

Minimum height: about 90MM

Maximum height: approximately 360MM

Lifting: 2.0T

Material: Steel

Net weight: 2.1KG

Item Size: 35*8.5*8.5 (L×W×T)

Scope: Suitable for small and medium sized vehicles. Such as: For cars/Buick/Santana/Vietnam and other vehicles.



Packing include:

Scissor jack * 1

Handle * 1



HEIGHT/CAPACITY CURVE

This device is designed to sustain the following loads at these specified heights. DO NOT EXCEED the rated capacity for each position.

Before Use:

1. Check before each use for abnormal conditions such as cracked welds, leaks, damaged, loose or missing parts.

2. Inspect the jack immediately if lift is believed to have been subjected to an abnormal load or shock.

3. If the jack is found to be damaged, it should be removed from service until properly repaired.



OPERATING INSTRUCTIONS

1. Insert the jack handle into the hole of the handle socket.

2. Make sure that the saddle is correctly positioned. To prevent damage to the jack, do not move the jack while the handle is intact in the socket.

3. To raise load, use one hand to hold the front part of the handle and use the other hand to turn at the rear and of the handle clockwise.

4. To lower load, use one hand to hold the front part of the handle and use the other hand to turn at the rear and of the handle counterclockwise slowly.



CARE AND MAINTENANCE:

1. When jack is not in use, lifting arm should be in full down position.

2. Always keep jack clean and keep the screw and bearings well lubricated.

3. Store the handle with care.

• The scissor jack, with tooth gears, can extend from 90mm (close position) to 360mm, more than enough to lift most vehicles. Easy to operate using the chromed crank with speed handle.
• Suitable for small and medium sized vehicles. Such as: For cars/Buick/Santana/Vietnam and other vehicles.
• NOTICE: Study, understand and follow all instructions before operating this device; Do not exceed rated capacity as designated by the height/capacity curve.
• Lift only on areas of the vehicle as specified by the vehicle manufacturer; Follow tire changing procedure as per the vehicle manufacturer's owner's manual; No alterations shall be made to this product; Failure to heed these messages may result in personal injury and/or property damage.
• We Are The Factory Who Specialize In Producing The Car Accesories Many Years! High Quality & Good Service!With 2 Years Warranty and Friendly, Easy-to-Reach Support. Buy with Confidence!

User questions & answers

Question:	I need this for a 99 toyota tacoma 4x4 with a 1.5” lift. will it work? a stock f-150 jack did? this looks similar
Answer:	Works with Professional 600
Question:	can this also work for older Toyota Camrys
Answer:	Hi. Yeah, it works as advertised. It's kind of a two person operation sometimes with larger pastas, one to feed it from the top while the other catches it. But it's fun making homemade pasta, solo or as a team.
Question:	would this work well for a 2016 Nissan Frontier extended cab, 4 door pickup (not 4 wheel drive
Answer:	Yes it worked very well and the pasta turned out great. The drying rack was a great addition.

Product description

Before Use:

1. Check before each use for abnormal conditions such as cracked welds, leaks, damaged, loose or missing parts.

2. Inspect the jack immediately if lift is believed to have been subjected to an abnormal load or shock.

3. If the jack is found to be damaged, it should be removed from service until properly repaired.



Attention:

1. Study, understand and follow all instructions before operating this device.

2. Do not exceed rated capacity as designated by the height/capacity curve.(Sea below)

3. Use only on hard level surface.

4. Use for emergency tire changing only.

5. Never get beneath the vehicle when it is supported by the jack.

6. Activate the hazard warning flasher,turn off ignition, set parking brake, move automatic shift selector to park position. In case of a manual transmission, move gear selector into reverse position. In addition, the wheel diagonally opposite from the wheel being lifted shall be chocked in both directions.

7. Lift only on areas of the vehicle as specified by the vehicle manufacturer.

8. Follow tire changing procedure as per the vehicle manufacturer's owner's manual.

9. No alterations shall be made to this product.

10. Failure to heed these messages may result in personal injury and/or property damage.



OPERATING INSTRUCTIONS

1. Insert the jack handle into the hole of the handle socket.

2. Make sure that the saddle is correctly positioned. To prevent damage to the jack, do not move the jack while the handle is intact in the socket.

3. To raise load, use one hand to hold the front part of the handle and use the other hand to turn at the rear and of the handle clockwise.

4. To lower load, use one hand to hold the front part of the handle and use the other hand to turn at the rear and of the handle counterclockwise slowly.

• The scissor jack, with tooth gears, can extend from 105mm(close position) to 385mm, more than enough to lift most vehicles. Easy to operate using the chromed crank with speed handle.
• Minimum height: about 105MM, Maximum height: about 385MM. Lifting: 2.0T
• Color: Black. Material: Steel. Net weight: 2.1KG. Item Size: 35*8.5*8.5 (L×W×T).
• Scope: Suitable for small and medium sized vehicles. Such as: cars, Buick, Santana, Vietnam and other vehicles.
• One package includes Scissor jack * 1 and Handle * 1. With 2 Year Warranty.

Product description

CARE AND MAINTENANCE:

1. When jack is not in use, lifting arm should be in full down position.

2. Always keep jack clean and keep the screw and bearings well lubricated.

3. Store the handle with care.



Specifications:

Minimum height: about 90MM

Maximum height: approximately 360MM

Lifting: 2.0T

Color: Black

Material: Steel

Surface Finish: Coated/Chrome

Net weight: 2.1KG

Item Size: 35*8.5*8.5cm (L×W×T)



Packing include:

Scissor jack * 1

Speed Crank Handle * 1



OPERATING INSTRUCTIONS

1. Insert the jack handle into the hole of the handle socket.

2. Make sure that the saddle is correctly positioned. To prevent damage to the jack, do not move the jack while the handle is intact in the socket.

3. To raise load, use one hand to hold the front part of the handle and use the other hand to turn at the rear and of the handle clockwise.

4. To lower load, use one hand to hold the front part of the handle and use the other hand to turn at the rear and of the handle counterclockwise slowly.

• Specification - Lifting Range: 3.5 inch - 14 inch (90mm - 360mm), Lifting Capability: 2 Ton (approx. 4400lb). Package comes with Scissor Jacks and Crank Handles.
• Done in Minutes - Scissor jack only takes about 2 minutes to reach a maximum height (36 cm) with a loading capacity of up to 2 tons. Whether men or women can easily replace the tire in any emergency.
• Easy to operate - Using the chromed crank with speed handle, use of high-quality solid steel, strong bearing gravity, resistance to pressure.
• User-friendly Jack - The use requires less energy than a normal car jack, takes up very little space in the car.prevents damage caused by overexertion.
• Universal Jack - Suitable for small and medium sized vehicles(Car/Truck/Vehicle/RV/Trailer): Use to fit Ford, Honda, Toyota, GMC, Chevrolet, Buick, Santana, Vietnam and other most cars.

Product description

The Torin BIG RED T10152 steel scissor lift jack car kit is a collapsible, compact jack can be used as a rugged replacement jack or as an extra utility jack that can be stored in the trunk of your car. Engineered using a drop forged alloyed steel construction for quality and durability and features a lifting range of 4-1/8" to 15-1/8" with a 1.5 ton (3,000 lb) capacity. It's equipped with an extra-wide base which adds stability and strength. The 1 piece handle delivers on-the-spot quick response and speed to get the job done quickly and safely. This unit is 100% factory tested for reliability and safety to meet and comply with ANSI/ASME PASE safety standards. Includes a limited 1 year manufacturer warranty.

• Collapsible, steel scissor lift jack has a compact design that can be used as a rugged replacement jack or as an extra utility jack that can be stored in the trunk of your car
• Features a lifting range of 4-1/8" to 15-1/8" with a 1.5 ton (3,000 lb) capacity
• Engineered using a drop forged alloyed steel construction for quality and durability
• Equipped with an extra-wide base which adds stability and strength; 1 piece handle delivers on-the-spot quick response and speed
• Meets ANSI/ASME PASE safety standards and includes a limited 1 year manufacturer warranty

User questions & answers

Question:	Can you tell me the width of the base on this jack? Thanks. RMW
Answer:	The base is 6&1/2" wide, is 4&1/2" deep at the ends, but narrower at the middle. Realize that made-in-China items can quickly change depending on their latest vendor, i.e., low-bidder. I'm happy with mine, although the picture for mine showed it had a flat top, and mine has two small bumps that protrude--although only a very little bit. These might provide stability in some situations, don't pose a problem in most, but I'd have peferred that the top be flat.
Question:	what is the fully collapsed height -- will it fit within a gap of 3-3/4 inches
Answer:	Yes. It will clear that distance. Its collapsed height is 3 1/2 inches.
Question:	Can you tell me about the length of the jack when it closed , I want to see if it match it's place in my car ( Toyota Camry
Answer:	When completely closed, as flat as can be, this item measures 5" high, 5" wide and 18" long.
Question:	Will this jack for toyota corolla le 2009 model
Answer:	I'm sure it will work for the 2009 Toyota Corolla. The limit on the Jack is 3,000 pounds. This jack should easily lift the weight from one side or one corner. Be sure the jack is firmly under a frame member. I would recommend a Jack stand or blocks to place under the frame in the event of a mishap.

Product features

Torin BIG RED Steel Scissor Lift Jack Car Kit, 1.5 Ton (3,000 lb) Capacity

Product description

With this scissor jack you can easily and safely lift your vehicle to the desired height.

This product is equipped with a ratchet wrench and now changing tires is child's play.

In addition, the heavy base plate provides a secure footing.

This product has an excellent quality. It is made of strong steel metal construction.

Resistant to high pressure and corrosion resistant. Every vehicle should have such a jack.

Product Features:

Product type: Scissors Jack with Ratchet Wrench

Maximum load capacity: 1.5T (1500kg/3307lbs) 

Minimum lifting height: approx. 4.1inches(105 mm)

Maximum lifting height: approx. 15inches(385 mm)

Product dimensions:16x3.5x4.1inches (42.5x9x10.5cm)

Product weight gross: 5.2lbs(2.35kg)

Operation Manual:

1. Insert the handle into the hole of the grip

2. Make sure that the saddle is correctly positioned. To prevent damage to the jack, do not move the jack while the handle in the socket is intact.

3. To increase the load, use one hand to hold the front part of the handle and use the other hand to turn clockwise at the back of the handle.

4. To reduce the load, hold the front part of the handle with one hand and turn the other hand with the back of the handle and slowly with the handle counterclockwise.

Package Included:

1x 1.5Ton Scissors Jack

1x Ratchet wrench

• Load capacity: 1.5T (1500kg/3307lbs) Dimensions:16x3.5x4.1inches (42.5x9x10.5cm).Height height:4.1~15inches (105m~385mm); Net weight: 5.2lbs(2.35kg)
• The solid base plate also ensures a secure footing, the product can be quite comfortable and easy, folded, carried in the vehicle
• It is widely used for smaller to medium vehicles such. B. Pickups, Station Wagon, Van, SUV, Big Van, Mini Bus
• Especially when driving over long distances, this jack should not be missing in your car. In the event of a flat tire, you can quickly and easily make a change with it.
• Including: 1x 1.5T (1500kg/3307lbs) jack; 1x ratchet wrench

User questions & answers

Question:	The purpose of the blue towel in one of the pictures
Answer:	Hi, dear, thanks for your asking. The blue towel prevent scratches on the paint surface, but in our package include not this part.
Question:	i can used in ford explorer
Answer:	Oh yes you can!
Question:	What's the size of the hex head on the jack that the included ratchet wrench attaches too
Answer:	3/4inches(19mm)
Question:	Will this work with Tesla Model Y the close position should be
Answer:	Do not use this jack for anything. It is unsafe and dangerous. Bad design

• ★Lift range from 3.85 inches to 17.4 inches; Capacity of 2.5 Tons (5,511 lbs)
• ★Oversized base width for maximum support and stability
• ★Heavy-duty steel frame and saddle
• ★Ratchet handle, Saving strength design

User questions & answers

Question:	What country makes the Leadbrand black steel 2 .5 ton scissor jack
Answer:	I own the same exact stand without casters, to put casters on stand would take cutting and welding, but it could be done. Make sure you check height of stand before welding casters because it will make stand higher.
Question:	Can this be used for a Ford F
Answer:	What in the world do you need a manual for a jack? You tighten the knob and pump the pedal stand goes up loosen the knob and stand goes down
Question:	What the size of the Jack collapsed
Answer:	Not fast at all. Takes many pumps of the pedal
Question:	What size is the hex drive? 17mm? Thanks
Answer:	It's not to heavy, I would guess around 45 to 55 lbs . I know no one lists the weight ? Great lift though I use it on my KAWASAKI KLX 450R . I use it in my shed and store in basement for the winter, So it's not too heavy.

Product description

The LEAD BRAND scissor jack is a labor-saving design.

The package size of Jack is 18.5 *3.94*3.94 inches and net weight of the jack is 8.38 lbs.

The load of this scissor jack is 2.5 tons(5511lbs) and its bottom is bigger.

The threaded shaft of the jack is solid and the steel plate is thickened.

The maximum height is 17.4 inches, it is suitable for cars and sports utility vehicles.

The jack is designed to be labor-saving. It is easy to lift the car when operating.



Usage Method:

First, park the car on a flat hard road and turn off the engine.

Second, fix the other three tires with tire pads or bricks.

Third, turn the screw shaft of the jack by hand to control the jack to rise until the top of the jack is against the underbody.

Fourth, when the car operates the jack, there is no need to install the steel column of the jack.

Fifth, put on the jack ratchet wrench and shake it back and forth to control the jack to rise, and stop the operation after the tire is off the ground.

Sixth, switch the ratchet wrench button and operate the control jack back and forth to lower.

• Load 2.5 tons(5511lbs).
• The bottom is bigger.
• Labor-saving design.
• Material: Thickened steel plate.
• It is suitable for cars and sports utility vehicles.

• 2 Ton capacity; High lift; Heavy duty. The max lift height is 385mm, about 15.4 inches.
• Superior, high quality steel construction.
• Simple and lightweight packed to car.
• All welded steel frame construction with rust resistant finish for longer tool life.
• Ideal for coupe, sedan, farm, and shop use. Designed to meet ANSI/ASME PALD 2014 standards.

User questions & answers

Question:	Will this accommodate a 2007 ford f150 XLT with a gross weight of 4000lbs
Answer:	Don’t buy this jack, it failed on me twice and damaged my car. I finally figured out that it is of poor design. It’s made sturdy but the gear like fingers that interlock as the jack is extended are thin and slip inside of each other causing the top plate ti tilt and slip off the frame.
Question:	Will it work for honda crv or any sub
Answer:	It looks like it should. I just used it to lift bed frames.
Question:	Will this scissor jack work for a 2015 kia soul
Answer:	This jack is a very good second jack. It will lift from about 2 inches (4cm ) up to 15 inches (16-18cm ) sometimes I have been stuck too low to use provided bottle jack. This style of jack will lift from very low. A well made jack. Good value
Question:	What is the exact height in inches when collapsed? Approximate or estimated measurements won't help. Thanks
Answer:	Thanks for your question, the min height is 23 inches when it collapsed.

Product features

Premium Material

• Threaded Bearing

Each joint is made of solid high-quality steel with high-precision grinding technology, which is exquisite and durable.

• Durable Revolving Shaft

Consistent with human mechanics, it's designed to save your effort ang improve work efficiency

Stable Base

• Bow-shaped base

Wide heavy-duty base provides stability and strength in case of dumping.

• Compact Construction

Use screws as fixing, it is not easy to deform and disperse, which is safer for you.

Lift Range

• Min Height: 105mm/4.13inch
• Max Height:385mm/15.16inch

Applicable Models

• Load Capacity: 2 Ton
• Suit for: Sedan, Coupe

Recommended Combination

• Scissor Jack Adapter
• 4-way Folding Lug Wrench

Premium Packaging

• Durable Corrugated Packaging
• Size: 18 x 6 x 5 inch

Product description

The Tusk UTV Scissor Jack Kit is a must-have accessory for your side-by-side. This kit includes the Tusk scissor jack and UTV mounting hardware. Whether you're changing a flat tire on the trail or pulling wheels in the shop, the Tusk scissor jack kit is a versatile tool to have. Two-ton lightweight portable jack equipped with a compact handle to make operation of the jack simple. The Tusk scissor jack mount provides a sturdy mounting system which will provide quick and easy access to your scissor jack. The jack mount is made with a high-quality, powder-coated steel and comes complete with a tough aluminum clamp to mount to your roll-cage.

• The kit includes the Tusk scissor jack and UTV mounting hardware.
• Two-ton lightweight portable jack equipped with a compact handle to make operation of the jack simple.
• Made with a high-quality, powder-coated steel and comes complete with tough aluminum roll cage clamps.
• Adjustable jack height between 3.75" and 18.25".
• Mounts in minutes!