15 best pit bull car jacks

Product description

From the Manufacturer

Order up! This super dish set is just what the planet is hungry for. Made from 100% recycled plastic, the Green Toys™ Chef Set helps to reduce fossil fuel use and CO2 emissions. Meets FDA specs for food contact. Dishwasher safe. Comes with endless supply of Good Green Fun™ at no extra charge.

• Green Toys

User questions & answers

Question:	are these microwave safe
Answer:	Not sure about the calories. My daughter tried to eat one, but she said they were too hard.
Question:	How can i confirm this is approved by the fda? what's the registration number
Answer:	There are approximately 12 pieces per package.
Question:	Does food slide off the plates easily? Looking for play plates for kids, the plate don't look like they have much of an edge to keep play food on them
Answer:	Our finesse worms come in 20 and or 40 pieces. The sizes are 4.5”, 5” and 6”. Hopes this helps.
Question:	Are these somehow exclusively for play? I'm looking for bowls to feed baby her first solids from (rice cereal, veggies purees, etc
Answer:	I bought the fake earthworms. They are soft, flexible, and realistic. I think they are rubber. Good quality.

Product features

Green Toys Dish Set

Includes everything you need to serve a meal for four, and do something great for the planet. The Green Toys Dish Set is made in the U.S.A.This set gives new meaning to the term “clean plate.” 24-piece set includes: 4 Cups, 4 Plates, 4 Bowls, 4 Utensil Sets (Fork/Knife/Spoon)

• Manufactured in the USA
• No BPA, phthalates or PVC
• Easy to clean and dishwasher safe

Product description

TEA01R Features: -Tea set.-Dishwasher safe.-Made in the USA.-6" H x 6" W x 6" D, 2 lbs. Includes: -Includes 17 pieces; Tea Pot with Lid, Sugar Bowl with Lid, Creamer, 4 Cups, 4 Saucers, 4 Spoons.

• Green Toys Tea Set

User questions & answers

Question:	Is this bpa free
Answer:	Not sure. Had to have an electrician install a new breaker and run heavier wiring.
Question:	Are these set has punctured holes in them
Answer:	The temperature is in Celsius. It goes to 50* C
Question:	How many ounces of water will the teapot hold
Answer:	I bought them. They are soft, flexible, and realistic. I think they are rubber. Very good quality.
Question:	Can you put hot tea and really drink out of them
Answer:	Wiggly and soft.

Product features

Green Toys Tea Set

Talk about green tea! Young hosts can serve up a pot of tea while doing something really good for the earth. Like all Green Toys products, our Tea Set is helping to reduce fossil fuel use and CO2 emissions, all in the name of Good Green Fun! This 17-piece set includes tea pot and lid, sugar bowl with lid, creamer, 4 cups, 4 saucers, and 4 spoons.

Use the tea set to help your child learn more about recycling, helping the environment, saving energy, and reducing greenhouse gases while they serve tea to family and friends. Besides the environmental benefits, the set is brightly colored, lightweight, and durable - making it a tea set that will last for years to come.

Colorful and 100% Recycled

This authentically styled tea set comes in pastel colors with interchangeable lids for the pot and sugar bowl. The lightweight set is made out of a durable recycled material. Manufactured, assembled, and tested in the United States, the set is environmentally safe, non-toxic, and dishwasher friendly. Another highlight of this tea set is the recycled cardboard packaging it comes in, which you can also recycle when you're through with it. With no plastic or twisting ties -- or any of the other environmentally unfriendly annoyances that come with opening up toy packaging -- it's easy to open and.

About Green Toys

We say that to us, 'every day is Earth Day'. Our commitment to sustainability and playfulness is part of our DNA and we hope to inspire others to share in this passion.

From our 100% recycled materials to our US-based manufacturing, we’re raising awareness about sustainability while delivering unquestionably safe products. We believe that the best way to encourage environmental change is through goods people buy and use every day—and in our case that’s children’s products.

We care about your kids – how they play, what they play with, and what the future holds. We are constantly exploring and innovating to deliver the best products possible for a playful planet for all.

Product description

From the Manufacturer

Reduce fossil fuel use and CO2 emissions...it’s all part of the recipe for aspiring gourmets who use the Green Toys™ Chef Set. Every bit as green as the rest of our products, this classic collection of kitchen essentials is made from 100% recycled milk jugs. It meets FDA specs for food contact, is dishwasher safe, and is guaranteed to produce hours of Good Green Fun™! No BPA or phthalates.

• Set includes stock pot with lid, skillet, ladle and spatula
• Made of recycled milk jugs
• Milk jugs recycled and cookware set made all in California
• Dishwasher safe

User questions & answers

Question:	Are these Biodegradable or recyclable
Answer:	*I do not own this product*According to the photo and the description, the water level window and the inside top of the lid is plastic. So YES, there are plastic parts touching water.
Question:	Can my baby eat from them
Answer:	The hose is about the same size as a dryer vent hose and extends about 6'. The window needs to open between 4-6".
Question:	What is the size of the stock pot and fry pan
Answer:	Yes
Question:	Im going to a 2 week camping session. Can i use these to cook food in it? I will be cooking all sorts of stuff.eggs, bacon, squirells
Answer:	There are 2 drains located on the back panel of unit - one in middle and one at bottom.

Product description

Talk about flower power. With the Green Toys build-a-bouquet, budding florists can create countless floral arrangements while saving energy and reducing greenhouse gas emissions. Made in the United States from 100% recycled plastic milk jugs, this brightly colored 44 piece set includes 4 bases, 16 STEM and leaf pieces, and 24 flower pieces. The vibrant lilies, petunias, and daisies stack interchangeably in the Assorted stems for limitless fun that blossoms in all seasons. It's no secret that this garden is as safe as it is fun, with no BPA, phthalates, PVC or external coatings. Packaged using recycled and recyclable materials and printed with soy inks. Bases: 4-1/2" x 1-1/2", stems: 1-1/2" to 2-1/4", flowers: 2-1/2" to 3-1/4". for ages 2+ years. Perfect for little hands to zoom along uses kid energy for an endless supply of fun. No BPA, phthalates or PVC printed with soy inks packaged with recycled materials.

• Made in the USA from 100% recycled plastic
• No BPA, phthalates, PVC, or external paints or coatings
• Dishwasher safe for easy cleaning

User questions & answers

Question:	What’s the difference between the new version and older version
Answer:	3 bottles in a box
Question:	What’s the difference between the new version and older version
Answer:	I lifted mine off the base to weigh it; it weighs 1 lb., 12.20 oz.We use ours every morning.
Question:	Why don’t toys come in packaging
Answer:	120V - 60Hz, 1500w
Question:	Did this item come loose inside the box? My box rattles
Answer:	The kettle itself has no cord. It sits on a base which has a cord that plugs in to an electric outlet. No batteries.

Product features

Green Toys Build-a-Bouquet

Talk about flower power! With the Green Toys Build-a-Bouquet, budding florists can create countless floral arrangements while saving energy and reducing greenhouse gas emissions. Made in the USA from 100% recycled plastic milk jugs that save energy and reduce greenhouse gas emissions, this brightly colored 44 piece set includes 4 dark green bases, 16 spring green stem and leaf pieces, and 24 pink, purple, and yellow flower pieces.

Classic play with a Green Toys twist

The vibrant lilies, petunias, and daisies stack interchangeably in the assorted stems for limitless fun that blossoms in all seasons. This set is great for developing fine motor skills and finger strength, while also encouraging creative, imaginative play. It's no secret that this garden is as safe as it is fun, with no BPA, phthalates, PVC or external coatings.

Made safe in the USA from recycled materials

Like all Green Toys products, the Build-a-Bouquet is manufactured in the USA with a tight, local supply chain that minimizes transportation emissions and supports the domestic economy. Packaged using recycled and recyclable materials and printed with soy inks. Bases: 4-1/2" x 1-1/2", Stems: 1-1/2" to 2-1/4", Flowers: 2-1/2" to 3-1/4". For ages 3+ years.

Product description

Right This way, your table awaits! The green toys classroom Cafe set is a one-stop-shop to outfit any play area or kitchen. The set encourages open, narrative pretend play, and helps develop language and communication as well as fine motor skills and coordination. The expansive set is made in the USA from 100% recycled plastic that's Safe to use with real food, and dishwasher safe for easy cleaning. 61 pieces, including: 2 stock pots with lids, 2 skillets, 1 ladle, 1 spatula, 1 tea pot with lid, 1 sugar bowl with lid, 1 creamer, 8 cups, 8 plates, 8 bowls, 8 utensil sets (fork/knife/spoon). no BPA, phthalates, PVC, or external coatings. Packaged with recycled and recyclable materials. Ages 2 and up.

• Made in USA
• 100% Recycled plastic
• Dishwasher safe
• Safe to use with real food

User questions & answers

Question:	How big are the plates
Answer:	24 fl. Oz.

Product description

Die cut from Premium Vinyl with a 7+ year exterior life. Sticker has no background. Will not fade like printed decals. Place on any smooth/clean surface. Easy to Install, Easy to remove.

• 2.7"x8"
• Easy to Install
• Non Permanent
• Will not fade like printed decals

Product description

Exclusively designed by Tshirt Rocket. Will not find elsewhere. Cutest pitbull decal! If your pup loves going on car rides and loves looking out the window, then this certainly should be on your window! Just a little head tilt with a smile to show he's a happy pit! Express yourself with designs that fit your sense of humor, personality or promotes your cause, your loves or beliefs. They can be placed on car windows, body of car, laptops, cell phones, video game hardware, glass, tile, flat metal, painted wood or any other smooth surface. Permanent adhesive, can be removed, but is not re usable. This is a die-cut vinyl material and there is no background. If you need a custom decal or different size of the above, please let me know and we can create a new listing for you.

• FREE GIFT with purchase during checkout!!
• Cutest pitbull decal! If your pup loves going on car rides and loves looking out the window, then this certainly should be on your window! Just a little head tilt with a smile to show he's a happy pit!
• All decals in our shop are waterproof! Outdoor applications such as windows, cars, boats, etc last 6-7 years. Indoor applications will last forever.
• Size shown is for illustration purpose only and to show detail of design. Please use the drop down menu to choose which size you want. Easy Instructions included
• Exclusively made by Tshirt Rocket, Inc. Makes a great gift!

• Perfect Gift for Pit Bull Parents!
• Set includes 1 vinyl sticker
• Multi Use! Stick anywhere from car to laptops
• Features the Eye Catching Artwork of Dean Russo
• Officially licensed product

User questions & answers

Question:	Are there any corgi variations available
Answer:	Unfortunately we do not currently have any Rottweiler stickers available from our Dean Russo line. I am happy to let you know that we are going to be adding a Dean Russo Rottweiler sticker in the very near future, hopefully within 2 weeks!
Question:	Is it decal or just sticker
Answer:	I don’t know. I haven’t applied it yet. I’ve been looking for a sheet of magnet material so I can apply it to that instead of putting it directly on my car.
Question:	can you put it on a water bottle
Answer:	Not sure. I live in Nevada. The sun hasn't affected it at all. It's been almost a year since I bought it. It still looks great
Question:	Looking for Rottweiler sticker
Answer:	Hey there, thanks for the question! These are around 7 inches across by about 2 inches in height. Hope this helps, Matt

Product features

Dean Russo Pop Art Pit Bull Sticker

• Express your love for dogs wherever you go; A great gift for pet lovers!
• Constructed from outdoor rated vinyl, ink and adhesive; this sticker will last for years in all temperatures and conditions, including sun, rain, snow and sleet
• Apply durable sticker decal to car windows, guitar cases, refrigerators, bumpers, regular house windows, mirrors, laptops or paper for scrap booking and crafts
• Sticker is easy to apply and remove; Made in the USA
• Measures approximately 4.42" wide x 6.72" high

• Perfect Gift for Pit Bull Parents!
• Set includes 1 vinyl sticker
• Multi Use! Stick anywhere from car to laptops
• Features the Eye Catching Artwork of Dean Russo
• Officially licensed product

User questions & answers

Question:	Do these come off easily
Answer:	Yes, our stainless steel rust remover and cleaner should work well on carbon steel. Any issues, please reach out to us. Thank you

Product features

Dean Russo Pop Art Pit Bull Sticker

• Express your love for dogs wherever you go; A great gift for pet lovers!
• Constructed from outdoor rated vinyl, ink and adhesive; this sticker will last for years in all temperatures and conditions, including sun, rain, snow and sleet
• Apply durable sticker decal to car windows, guitar cases, refrigerators, bumpers, regular house windows, mirrors, laptops or paper for scrap booking and crafts
• Sticker is easy to apply and remove; Made in the USA
• Measures approximately 4.42" wide x 6.72" high

Product description

Designed of durable and solid structure the hydraulic jack lift not only provides a reliable support during the operation but also for a long-term use. The lift table comes with non-slip hard rubber plate with strong locking springs to insure safe and sturdy stand when the loads are lifted and released. The hoist center stand with foot pedal lift makes it a great tool for motorcycle atv's lawn tractors dirt bikes mopeds and more.

• 300Lbs of Bearing Capacity: Lifting up to 300 lbs, the hydraulic scissor floor jack is perfect for tinkering on your dirt bike or small motorcycle.
• Enough Lifting Height: Lift height from 15 inches (min height) to 38 inches (max height), the lift table eliminates the need to stoop or kneel while working on your motorcycle.
• Rubber Padded Platform to Prevent Damage: The wide top platform provides a safe, stable surface for your motorcycle while using the jack. And the rubber padding prevents any metal on metal contact, protecting your ride from scratching, scuffing and scraping.
• Safety Design: Lift table comes with non-slip hard rubber (gum) plate with strong locking springs to insure safe and sturdy stand. As well as when the platform has been raised to the working height, ensure the locking bar is engaged to prevent accidental lowering.
• Easy Operation: Easy to use foot pedal operation for raising and lowering, compared with the traditional lifting method, it is more labor-saving. As well as include all hardware to mount bike to stand securely

User questions & answers

Question:	what is the size of the platform
Answer:	I lifted a Volkswagen with it. In order to lift an large SUV , you probably need a platform for it to get the right height. I have a F150 & haven't tried to lift it yet
Question:	What is the weight capacity
Answer:	I used it to lift my Chevy C10 66 All Steel way over its weight Factor it works pretty good you're only lifting 1/4 of the truck
Question:	How do the foot peg hooks work/ how well do they work
Answer:	I own a 2016 Chevy Traverse. I was able to get the tires off the ground in order to change the tire.
Question:	It really takes 70 strokes to lift it fully
Answer:	Used once this week, seems like a good quality build, not for constant use (like a garage repair tool) but smoothly operated and lug nut wrench works well about 90 to 100 foot pounds of torque. Bought for my wife she loves it no wrestling with a clunky jack or spinner thingy. Lol

• This is highly durable
• Patented design features both a removable Lift saddle and padded Lift rails
• Lifting capacity of 4, 000 pounds
• Locking safety bar holds jack in place once raised
• Easily lifts cars, trucks, atvs or removing/replacing transmissions or differentials.Handle Length:40 inches
• Patented design features both a removable lift saddle and padded lift rails
• Flexible design allows the Triple Lift to adapt to multiple types of vehicle frames

User questions & answers

Question:	Does it work on 3 ton jack stand too
Answer:	Yes, I used it to raise an air conditioning unit out of the windowsill.
Question:	how high does that jack go off the ground? I need
Answer:	Yes it should work with a 650. Really any motorcycle, scooter. You would slide it in between the front and rear wheel not centered but balanced. I welded tabs and bolted to my table. Then I welded a ring on both sides for a ratchet strap. It is very strong, reliable and sturdy. Use a 7/8 socket to lift and lower the scissor jack it works better than the hand crank that comes with it. Definitely a good buy. Hoping this helps- Mickey
Question:	I was curious with the jack fully extended, what is the height of the jack? I have a Toyota FJ with a 3 inch lift which puts it at 11 inches
Answer:	I like the jack my Harley limited loaded weight at least 900 lb picks it up but no problem good Jack just don't use a air gun on it you got to use a hand ratchet
Question:	what is the minimum height required for this jack to slide under? I need to determine if it will fit under my car
Answer:	Dear customer, our lift is mainly used to lift motorcycles for maintenance. And the weight capacity is 1100 lbs. For safety reasons, we do not recommend that you use it to lift your pool table.

Product features

Powerbuilt 2 Ton Triple Lift Floor Jack

Get rid of your floor jacks, transmission jacks and ATV jacks. The 2 Ton Triple Lift jack is three jacks in one! This innovative jack has a patented design that lets you lift cars, trucks, motorcycles or ATVs with ease.

The Triple Lift slashes the expense and hassle of purchasing, maintaining and storing multiple jacks and jackstands. It's the one jack that easily lifts almost anything with wheels, and works on vehicle transmissions and differentials too.

The secret to the Triple Lift is the patented design that features both a removable lift saddle and padded lift rails. This flexible design allows the Triple Lift to adapt to multiple types of vehicle frames.

A locking safety bar holds the jack in place once the vehicle is raised, which eliminates the hassle of supporting a lifted vehicle with jack stands. Built-in tie-down loops make it easy to secure motorcycles in place for added stability.

• Perfect Gift for Pit Bull Parents!
• Set includes 1 vinyl sticker
• Multi Use! Stick anywhere from car to laptops
• Features the Eye Catching Artwork of Dean Russo
• Officially licensed product

User questions & answers

Question:	How easy does it peel off the window? I only have my leased car another year. I'll need to take the sticker off by then
Answer:	I should work. I did find this recommendation on the web: "Suggested replacement reference for: RF59N ValuePlus Roof Fan, RF69, RF69N Deluxe Roof Fan, 89747000, 89747-000, DA2E123, DA2E123N, DA2E062N, DA2E062, DB2E005N". Notice your number/letter combination is in the list.

Product features

Perfect For Any Color Car

The full color spectrum of this sticker makes sure it matches any color car!

Perfect Bumper Sticker For Artistic Dog Lovers

Designed by artist Dean Russo, these colorful pit bull stickers are ideal for dog lovers who who want to share their love of their furry friends with a splash of color.

Perfect Bumper Sticker For Artistic Dog Lovers

Designed by artist Dean Russo, these colorful pit bull stickers are ideal for dog lovers who who want to share their love of their furry friends with a splash of color.

Perfect Bumper Sticker For Artistic Dog Lovers

Designed by artist Dean Russo, these colorful pit bull stickers are ideal for dog lovers who who want to share their love of their furry friends with a splash of color.

Dean Russo Pop Art Pit Bull Sticker

• Express your love for dogs wherever you go; A great gift for pet lovers!
• Constructed from outdoor rated vinyl, ink and adhesive; this sticker will last for years in all temperatures and conditions, including sun, rain, snow and sleet
• Apply durable sticker decal to car windows, guitar cases, refrigerators, bumpers, regular house windows, mirrors, laptops or paper for scrap booking and crafts
• Sticker is easy to apply and remove; Made in the USA
• Measures approximately 4.42" wide x 6.72" high

Product description

The center-lift design of the Extreme Max Wide Motorcycle Scissor Jack is perfect for most motorcycle maintenance needs. Without the optional dolly, the jack lifts to an extended reach of 14” while the 15-1/8” x 9” platform holds your bike with a rubber padding that prevents scratching and adds stability. The jack is operated manually by using a 7/8” socket or wrench (sold separately). Measurements: Extended height: 14”; Collapsed height: 3-3/8”; Base: 15-1/8” x 9”; Lifting platform: 15-1/8” x 9”. *Do not use an impact-style wrench to raise or lower the jack.

• Extends up to a 14" height
• Easily hand-operated using 7/8" socket or wrench (sold separately) - *Do not use an impact wrench or powered drill to operate the lift
• Durable rubber padding on platform
• Heavy-duty steel frame
• 1100 lb. weight capacity; will not lift trikes

User questions & answers

Question:	what is the jack height when lowered
Answer:	I mean if the floor is level, then I’d say it’s very stable. Can’t attest to only 25 pounds. I’m on average only lifting 800-1000 lb bikes.
Question:	will this work for my harley trike
Answer:	I have an 83 FLHT on mine and we used a couple of thin pieces of wood under the bike. If you could put a couple of pieces underneath to take up the space. I wouldn't rest my engine on the lift.
Question:	With the dolly, amazon indicated apr 24-may 17 delivery timeframe. does that sound right? that's over a month out. thx
Answer:	I used it on Harleys only. But when I do. I use a flat aluminum disposable baking pan. I also have a large lift that I put my bike on.
Question:	Has anyone attempted using this lift with a late model Indian
Answer:	I don't have an exact answer, you'd probably be better off just getting a dirt bike stand though. I don't think the goes much past a foot. Works great for my Vl800 cruiser. But it's only got 6 in or so of clearance

Product features

Extreme Max Wide Motorcycle Scissor Jack

When it's time to get your motorcycle's wheels off the ground for maintenance or cleaning, look no further than the Extreme Max Wide Motorcycle Scissor Jack! Specifically designed to be one of the strongest and most stable scissor jacks available, the high strength worm drive and heavy-duty steel construction pair together to lift nearly any road bike, touring bike, or cruiser up to 1,100 lbs.

The lift is operated manually by using a wrench on the 7/8" worm drive. Do not use an impact wrench or powered drill to operate the lift.

Strength

When lifting your motorcycle, you want something strong, something you can rely on time and time again. That's why our engineers put in the effort to create a scissor jack with unparalleled strength and ease-of-use. Heavy-duty steel is the main component in the construction of the jack, preventing bending, breaking, and warping – keeping it consistent from it's first use through it's 100,000th use.

Stability

Stability shouldn't be a question when you're lifting anything, especially something as precious as your motorcycle. Designed with this in mind, the wide platform covers a large area, easily spanning gaps between frame rails or contacting more surface area on belly pans. The more flat surface you contact, the more stable the motorcycle. Textured rubber padding prevents any metal on metal contact, protecting your ride from scratching, scuffing and scraping.

Slim Fit

What good would a jack be if it couldn't fit under your ride? Many low riders and cruisers offer extremely low ground clearance, making it impossible to use a center-lift jack. However, with a fully-collapsed height of just 3-3/8", this should never be a problem! Park your motorcycle, slide your jack into position underneath, then lift away!

Reach

Starting at the fully-collapsed height of 3-3/8", the Extreme Max Wide Motorcycle Jack offers a tremendous 10-5/8" vertical travel, topping out at a fully-extended height of 14". This height provides plenty of clearance for tire changes, drive chain maintenance, cleanings, tune-ups, and more. While extended, the worm drive acts as a brake, holding the jack at the height you set without needing any clumsy locking bars or brake levers.

Also available from Extreme Max:

Extreme Max 5001.5059 Motorcycle Scissor Jack with Dolly

Also available from Extreme Max, the Motorcycle Scissor Jack with Dolly features the exact same jack, but adds the addition of a dolly tray to increase its versatility. Sliding your jack into place underneath your bike has never been easier.

• COMPACT AND FUNCTIONAL - This compact hydraulic jack makes it safe and easy to service your motorcycle or ATV through a simple lifting mechanism which is able to hoist up to 1500 lbs
• HIGH-QUALITY MATERIALS - Made with a durable steel frame and high-quality, non-slip rubber lift pads, this jack is able to lift your machine without damaging itself
• SAFETY FIRST - Comes with a 3-position safety lock mechanism, fix your vehicle without worry
• EASY TRANSPORT - Built with a handle and swivel casters, the jack is easy to transport and simple to stow
• MANUALLY OPERATED - The jack can be operated manually by foot pedal ; Comes with two tie-down straps, two adapter bars, and a detachable handle

User questions & answers

Question:	Will this work for a vucan
Answer:	Hi Kermit, sorry it's been a while since I logged on to Amazon. I'll start by saying that I used a 62 doing surveys as a contractor with DHS. It was a fine unit and did its job. In my work I never had to push any of its features to their limit so for us, it was very adequate. Having said that, when it came time for me to purchase a GPS for myself, I wanted the newer model, so therefore I went with the model 64. Keep in mind, both are base models for their respective series, so they do not have the fancier features of the s and st. As far as comparison, the 64, being newer has a bit more, but not that you'll necessarily notice. It depends on your use 64 62Built in Memory: 4GB vs. 1.7GBWaypoints: 5000 vs. 2000Data cards: Accepts microSD vs. Does not acceptGeocaching: 250,000 preloaded vs. paperlessHigh SensitivityReceiver: GLONASS AND GPS vs. NoneThere are complete lists on the internet as to which does what. I believe they are both pretty good units but the 64, being newer, is updated with a few more features and a bit more memory. the only drawback I can think of is that it lists the battery capacity at 16 hours vs 20 for the 62. In addition, I don't know if you can even get the 62 anymore. Once again, having used both, I see not major difference if you're just going to use it for some hiking, biking, getting your position, bearing, etc. Unless you're a scientist or you're going to load all kinds of data or save copious amounts of data or the like, I doubt you'll even notice the difference. I do believe the GLONASS does make a big difference in speedy acquisition of satellites, though. Sometimes it's acquired a fix even seconds after I turn it on. Is it a big deal? Not really, but hey, that might speak to the sensitivity of the unit in the field. So far, I'm happy with it. I hope this helps answer some of your questions.
Question:	What is the height of this jack in it's compressed possion
Answer:	Hi Eric! Thanks for the great question! The Spot X 2-Way Satellite GPS Messenger requires a subscription to use the device. A major advantage is that you can commit to a service plan that is a Month to Month commitment and only costs $14.95 Per Month. If you decide that your willing to sign up for the year, the rate drops to $11.95 per month. If you have any other questions, feel free to reach out!
Question:	Jack doesnt work with motorcycle
Answer:	Hi Brian! The Spot X GPS Satellite SOS Messenger requires that you have a service plan to utilize all of the unit's capabilities. Features such as the Waypoint you mentioned; will only work once you have set this up. The good news is that you do not have to commit to an annual service agreement. Instead, you can pay month to month without the long term commitment. So, for example, If you locked in a time to travel or hike and have advance notice, you can time the monthly service plan to suit your needs and turn off the subscription at your discretion. I hope that helps!
Question:	How log are the lift pads and what is the width of the lift cradle
Answer:	Yes, SPOT GEN4 provides 2-way satellite messaging when you’re off the grid or beyond reliable cellular coverage.

Product features

VIVOHOME 1500 LB Motorcycle Hoist Jack

VIVOHOME’S Motorcycle and ATV lift is made from high-quality steel designed to be easy-to-use, portable, and strong enough to handle small personal vehicles like dirt bikes, motorcycles, jet skis, snow mobiles, and ATVs. After the machine has been loaded onto the jack adjustable locking screws secure the wheels in place to provide stability and safety. Along with a three-position safety lock, this jack will secure any machine you might need to repair.

More About The Product:

Product Specification:

• Material: Steel
• Package Dimensions: 32.28”L*16.34”W*4.92H”
• Item Weight: 62lbs

Package Include:

• 1 x Lift Jack
• 1 x Handle
• 2 x Tie-Down Straps
• 2 x Adapter Bars
• 1 x Manual

Non-slip Rubber Pad

Prevent the projects slipping while lifting up

Swivel Casters

Easy To move, position And transport

Durable Footplate

Easy to operate, time saving and labor saving

• ✅SECURE ELEVATION: A must-have for sport or dirt bike enthusiasts. The large rubber top surface lifts the wheels off of the ground to allow for better access for maintenance and repairs, as well as improved storage.
• ✅SAFETY FOOT STEP LEVER: The large foot step lever design helps avoid pinched fingers and strained shoulders from lifting your bike. The hydraulic pump mechanism allows you to lift your bike with ease.
• ✅SOLID CONSTRUCTION: The solid high-grade steel frame creates a strong, stable platform for your motorbike during maintenance or storage. A gap in the platform provides access to your oil pan for home maintenance and oil changes.
• ✅PORTABLE CONVENIENCE: The compact size and manageable weight allow for this lift to be transported and moved whenever needed. Easily move this lift on the 4 sturdy rubber wheels, of which 2 are lockable for added stability.
• ✅NON-SLIP DESIGN: Non-skid rubber padding on the top surface will keep your bike from slipping during maintenance and storage. Safely holds up to 300 pounds.

User questions & answers

Question:	If you changed out the hydraulic jack would the Aussie lift rise any higher
Answer:	The devices which we are currently selling are October 2017.
Question:	What is the highest distance for that lift
Answer:	Unfortunately only US units are allowed to be sold in the US. Thank you
Question:	Can i use this to put the bike in my pickup truck if the truck bed height is lower than 36 inches
Answer:	The price is usually around 1/3 of the full price, but it will depend on the conditions of your beacon once it's sent to the battery replacement center. If you are in an emergency you can just notify the manufacturer and they should replace it for free.
Question:	Anyone have thoughts about using this as a transmission jack
Answer:	Unfortunately no. Every unit sold in the US is built with a US code.

Product features

Durhand 36” Foot Step Hydraulic Pump Lift for Small Motorcycles and Dirt Bikes

Bike maintenance and repair is a daily ritual for most riders, and knowing that your lift can keep up with your consistent schedule is important. Durhand’s adjustable lift features a non-slip rubber top, hydraulic foot step lever, and a portable 4- wheel design that will keep you riding. This portable lift is a convenient size, and the 4 easy to maneuver wheels help you take it from the garage to the track, the shop, or the trail. A sturdy steel frame, powder coated for rust and corrosion resistance, gives this lift strength, durability, and longevity. With a large surface area, topped with non-skid rubber padding, your bike will sit fully elevated with no slipping. We know you love your bike, so let us help take some of the stress out of your maintenance routine when you use our adjustable lift from Durhand.

Secure Elevation

A must-have for sport or dirt bike enthusiasts! The large rubber top surface lifts the wheels off of the ground to allow for better access for maintenance and repairs, as well as improved storage.

Safe and Sturdy

The large footstep lever design helps avoid pinched fingers and strained shoulders from lifting your bike. The hydraulic pump mechanism allows you to lift your bike with ease. Non-skid rubber padding on the top surface will keep your bike from slipping during maintenance and storage.

Solid Construction

The solid high-grade steel frame creates a strong, stable platform for your motorbike during maintenance or storage. A gap in the platform provides access to your oil pan for home maintenance and oil changes.

Portable Convenience

The compact size and manageable weight allow for this lift to be transported and moved whenever needed. Easily move this lift on the 4 sturdy rubber wheels, of which 2 are lockable for added stability.

Features

• Large top surface lifts your bike off of the ground for better access for maintenance and repair
• 4 wheels make this lift easily portable from the garage to the track, shop, or trail
• Constructed from durable steel
• Hold up to 300 lbs
• Large hydraulic foot step lever design promote safety
• Non-skid rubber padding on the top surface will keep your bike from slipping off

Specifications

• Material: Steel, Rubber
• Color: Blue
• Overall Size: 17.75" L x 15.75" W x 36.5" H
• Top Size: 16.5" L x 13.75" W
• Adjustable Height: 13.75" - 35.5"
• Net Weight: 60 lbs.
• Weight Capacity: 300 lbs.
• Accessories Included: 2 U-type hooks, foot step pedal lever, rubber foot pad, 2 hooks, long rod