13 best husky scissor lift jacks

Product description

Husky scissor jacks stabilize and level your travel trailer or 5th wheel. Lifting capacity of 6,500 pounds per jack. Universal design of sturdy steel construction fits most RVs. Permanently mounted jacks are conveniently concealed when not in use. Attaching hardware, instructions and easy-to-use swivel handle are all included. Can be welded on. Easy installation. 35 sq. inch base plate. Black powder coated. 2 year limited manufacturer warranty.

• 6,500 pounds lifting capacity per jack and total lift of 24 inch
• 35 square inch base plate
• Sturdy Steel Construction
• Black Powder-Coated Finish
• Attaching hardware, instructions and easy-to-use swivel handle are all included

User questions & answers

Question:	Do these come with all bolts and screws and insturctions
Answer:	What you see in the picture is what you get. To mount them you have to drill your frame to match the holes in the jacks and bolt them to the frame. Or you can do as I do and just raise them against the frame when I need them. They are easy to use.
Question:	What is the approximate time to install them
Answer:	They come complete with mounting screws. My application was not a permanent mount. I cut two 2x4's and bolted them to the jacks. This provides a contact point for my boat trailer. I park my trailer in the yard, then put the jacks under the fram in the back. Crank them up and relieve the weight off the axle and tires some not all, then leave it there until I take the boat out. Simple crank down, leave the jacks where they sit, and reverse the process when I return. For leaving them on a trailer, I would imagine it would take 20 minutes to pre-drill the mounting holes and install them.
Question:	Looks like minimum (collapsed) height is 5"-6"...what is the maximum extended height
Answer:	They exrtend to 24".
Question:	are these jacks American made? also, when collapsed what is the overall long length so I will know how much it will stick out from my frame
Answer:	According to the stickers on the jacks they are American Made. They are extremely heavy duty. I have them on an 18,000lb fifth wheel and they will lift it. When collapsed they are about 6 inches high and about 24 inches in length. So 12 inches from the center. They should not stick out beyond the body of the camper. Hope this helps.

Product description

HUSKY TOWING 76862 Comes with full manufacturer warranty and usually leaves warehouse same day.

• 76862

User questions & answers

Question:	Is this a set of 2 or is it just 1 jack
Answer:	Its in the instruction manual. Press and hold the button. Make sure your bluetooth is on.
Question:	Why is this husky scissor jack claimed to be manufactured in the usa, but the part shows up in a box that says "made in china
Answer:	These earbuds are small and rechargeable. I don't see how you could change the batteries inside because the item is small and there is no place where it looks like you could open them up to replace batteries, which would have to be very small. There is no mention of changing the batteries in the instructions for use/care. I've had one set for years. They recharge as well as new and don't discharge any faster, either.

Product description

RPL SCISSOR JACK-24' Features:

72139

Product Details:

Weight: 5 pounds

Brand: HUSKY TOWING

Model: 72139

Item Weight: 5 pounds

Product Dimensions: 28 x 9 x 4 inches

Item model number: 72139

Manufacturer Part Number: 72139

Handling We will ship all orders within 3 business day of payment.

We Do Not Ship Outside of the Continental US.

Return Policy All items qualify for returns within 30 days of receipt. Buyer is responsible for return shipping on any item that is not damaged.

Feedback We take our reputation seriously, we buy and sell online, so we understand the value of trust. If you are unsatisfied with your order, please contact us and we will work with you to resolve it to your satisfaction.

Exported By ExportYourStore

• Product Type:Auto Accessory
• Item Package Dimensions:28.0 " L X 9.0 " W X 4.0 " H
• Item Package Weight:5.0 lbs
• Country Of Origin: China

User questions & answers

Question:	Is this scissor lift bolt or weld on
Answer:	Advertises 1 year.

Product description

The Torin BIG RED T10152 steel scissor lift jack car kit is a collapsible, compact jack can be used as a rugged replacement jack or as an extra utility jack that can be stored in the trunk of your car. Engineered using a drop forged alloyed steel construction for quality and durability and features a lifting range of 4-1/8" to 15-1/8" with a 1.5 ton (3,000 lb) capacity. It's equipped with an extra-wide base which adds stability and strength. The 1 piece handle delivers on-the-spot quick response and speed to get the job done quickly and safely. This unit is 100% factory tested for reliability and safety to meet and comply with ANSI/ASME PASE safety standards. Includes a limited 1 year manufacturer warranty.

• Collapsible, steel scissor lift jack has a compact design that can be used as a rugged replacement jack or as an extra utility jack that can be stored in the trunk of your car
• Features a lifting range of 4-1/8" to 15-1/8" with a 1.5 ton (3,000 lb) capacity
• Engineered using a drop forged alloyed steel construction for quality and durability
• Equipped with an extra-wide base which adds stability and strength; 1 piece handle delivers on-the-spot quick response and speed
• Meets ANSI/ASME PASE safety standards and includes a limited 1 year manufacturer warranty

User questions & answers

Question:	Can you tell me the width of the base on this jack? Thanks. RMW
Answer:	The base is 6&1/2" wide, is 4&1/2" deep at the ends, but narrower at the middle. Realize that made-in-China items can quickly change depending on their latest vendor, i.e., low-bidder. I'm happy with mine, although the picture for mine showed it had a flat top, and mine has two small bumps that protrude--although only a very little bit. These might provide stability in some situations, don't pose a problem in most, but I'd have peferred that the top be flat.
Question:	what is the fully collapsed height -- will it fit within a gap of 3-3/4 inches
Answer:	Yes. It will clear that distance. Its collapsed height is 3 1/2 inches.
Question:	Can you tell me about the length of the jack when it closed , I want to see if it match it's place in my car ( Toyota Camry
Answer:	When completely closed, as flat as can be, this item measures 5" high, 5" wide and 18" long.
Question:	Will this jack for toyota corolla le 2009 model
Answer:	I'm sure it will work for the 2009 Toyota Corolla. The limit on the Jack is 3,000 pounds. This jack should easily lift the weight from one side or one corner. Be sure the jack is firmly under a frame member. I would recommend a Jack stand or blocks to place under the frame in the event of a mishap.

Product features

Torin BIG RED Steel Scissor Lift Jack Car Kit, 1.5 Ton (3,000 lb) Capacity

Product description

Compact, Light Weight to Carry in Your Automotive

Pro-Lift T-9456 Grey Scissor Jack is the 3000 pound capacity scissor jack. It is a great light weight jack for the garage or to carry in your automobile.

The compact size and the light weight make it easy to position and the handle design makes it easy to lift.

With its built-in extra wide base, it provides you with the additional stability.

Pro-Lift T-9456 Grey Scissor Jack gives you the lifting range from 3-3/4 inches to 15-1/8 inches

- Extra Wide Base for Extra Stability

- Lifting Range from 3-3/4 inches to 15-1/8 inches

- 3,000 Pound Rated Weight Capacity Scissor Jack

- Meets or exceeds the latest ANSI/PALD standards

Specifications

- Capacity: 3000 Lbs

- Package Dimension: 17.2 x 3.9 x 4.7 inch

- Lifting Range: 4-1/8 to 15-1/8 inch

- Item Weight: 9 Lbs

Pro Lift T-9456 Scissor Jack is backed with SFA 90 Days Warranty from the Date of Purchase.

Grab one now to carry in your automobile.

• The product is 3000lb scissor jack
• Easy and simple use kit
• The product is manufactured in china
• Extra wide base for extra capacity and stability
• Lifting range from 3-3/4 inches to 15-1/8 inches
• 3,000 pound rated weight capacity scissor jack
• Meets or exceeds the latest ANSI/PALD standards

User questions & answers

Question:	Is there any kind of warranty
Answer:	China. All the products sold in OESS store are made in China.
Question:	Can i use if for cars
Answer:	Hasta el momento no tiene ningun problema, esta plataforma tiene cuatro soportes de hule que ayudan a que no se desplace ni oscile.
Question:	I have a Dodge 2500 truck..Do you think it will work for changing 1 wheel at a time
Answer:	There is some side-to-side mechanical play when fully extended which is about 0.5 to 1.0cm. Also, when fully extended there is some play in the tilt of about 3 degrees. It is not rock solid so it will depend on your application whether or not the mechanical play is an issue or not.
Question:	does it come with handle
Answer:	The maximum loading capacity up to 110lb(50kg)

Product features

Pro-Lift T-9456 Grey Scissor Jack - 3000 lb. Capacity

Features:

• 3,000 lb capacity scissor jack
• Extra wide base for extra capacity
• Lifting range: 4 1/8” to 15 1/8”

Product description

The 24" Scissor Jack keeps your RV level and stable. Expands from 4" (collapsed) to 24" (extended) height and features a bowtie base that sits well on hard or soft surfaces. Holds up to 5000 lbs. per jack.



Product Options:



Model JSC-24 (24″ Scissor Jacks – set of two with a crank handle)

Model JSC-24-IND (24″ Scissor Jack – one jack only, no crank handle)

Model JCH-1 (manual crank handle for 24″ and 30″ scissor jacks)

• Keeps your RV level and stable
• Expands from 4" to 24" in height
• Bowtie base sits well on hard or soft surfaces
• Holds up to 5000 lbs. per jack
• One jack only, no handle included

User questions & answers

Question:	How many jacks for
Answer:	Not sure which measurement your looking for. All I can say is that this was the exact replacement for my 32 foot fifth wheel with the exception of the top plate that bolts to the camper frame. The bolt pattern didn’t match and I had to switch it with the one from the damaged jack.
Question:	Can this be used to change tires on a Yukon
Answer:	Yes, just be careful to use jack stands with this jack, do NOT rely on it, solely, to hold your vehicle in position while you bang on a bolt, etc. I was under my 2017 civic doing an oil change and banged the handle of my wrench to loosen the oil drain plug and the jack came off the lift point. Fortunately, I had two jacks for safety, ready to support the front at the lower control arms and they caught the car from falling on me!
Question:	Will this be able to lift a truck for a tire change
Answer:	I wouldn’t risk it. It isn’t able to lift very much. Read the reviews.
Question:	How wide is it
Answer:	I don't know if it will fit explorer, I would recommend searching for one with your explorer make

Product description

Fit Under Low Ground Clearance Vehicle

Pro-Lift F-767 Grey Low Profile Floor Jack is a 2 Ton floor jack that give you better access to low ground clearance vehicle. And,give you the lifting range from 3-1/2 inches to 14 inches.

The Jack can be fit under a clearance of 3-1/2 inches and maneuvered easily into position.

Pro Lift F-767 floor jack also features the heavy duty steel construction that provides the long lasting durability.

Pro Lift unique patented bypass device protects against over pumping. Its built-in safety valve provides overload protection.

- Extra Low Profile

- Lifting Range from 3-1/2 inches to 14 inches

- Patented bypass device protect over pumping

- Built-In Safty Valve Provides overload protection

Pro Lift F-767 floor jack is backed with SFA 90 Days Warranty from the Date of Purchase.

Take one now to access to the areas you never access before.

• Extra low profile
• Lifting range of 3-1/2 inches to 14 inches
• Patented bypass device protects against over pumping for safe operations
• Built-in safety valve provides overload protection. Rust Resistant
• Heavy duty steel construction provides long term durability

User questions & answers

Question:	Does it come with a portable case
Answer:	No, but the box it comes in is pretty sturdy. If you remove the cardboard packing the jack easily slides back into the box. The inside bottom of the box is reinforced. Not sure how long it will hold up, but it’s better than nothing.
Question:	Will this raise a 2011 cadillac cts enough to get jack stands underneath it? i want to change transmission oil ... thanks
Answer:	A Cadillac CTS is roughly 4,300 pounds. Which is a little over the capacity of this jack. As long as you're placing it on jack stands and you don't leave the jack holding it too long, it should be okay. Although all the armchair experts on this site will implore you to buy a 3 or 4 ton jack. Just remember to always put the car on jack stands and do your work on a flat, level surface.
Question:	Can anyone tell me the outside diameter of the lifting cup? Thanks
Answer:	The cup itself is 2 1/4 inches, with the inner portion (The part that spins freely, with the 4 tabs) 1 7/8ths, and the tabs extend about 1/4 inch up from the cup. Hope this helps.
Question:	What kind of oil does this take? The screw was loose when it was shipped to me and some oil had poured out into the box. I just want to top it off
Answer:	hydraulic jack oil. The screw IS loose upon arrival. If you read the SHORT instructions....this (grey) screw is HOW TO LOWER the jack when you are done lifting and have supported the weight/vehicle with jack stands. Turning just a bit using the handle you used to pump up the vehicle - you will notice it lower ever so gently. ONCE it is fully lowered - it is best to immediately turn the screw clockwise until it stops - this prepares the jack for its next use. Do this so you will not forget it is closed. IMO - some people with oil spewing - did not 'get it' how important it is to assure the valve is closed BEFORE raising the vehicle.

Product features

Pro-Lift F-767 Grey Low Profile Floor Jack - 2 Ton Capacity

About Us:

Our ProLift hydraulic automotive jacks, lifts and garage equipment range will cater to many 'do it yourself' enthusiast. The product line includes bottle jacks, floor jacks, garage jacks, aluminum jacks. scissor jack, lawn mower lifts, utility lifts, chokes, dirt bike lift, creepers, mechanic seats and more! Explore our range on the products page.

ProLift has become a global presence in the go to automotive garage maintenance equipment with locations in the United States, The Netherlands, Taiwan and Australia. We create dependable and reliable performance hydraulic equipment.

Product description

The Lead Brand scissor jack is 1.5 Tons (about 3,307 lbs) .

It can be used when you need to repair the tire.

The compact size and small volume can be easily to preserve.

The raise of maximum height is 385mm(15.16") and it suits for most sedans.

Collocating with wrench can lift the car easily.

The thickness of steel is 3.1mm(0.12") and the net weight is 2.76kg(6.08 lbs) .

After testing the plant summed that the scissor jack can lift the car which is 1.5 Tons(3,307 lbs).

The utmost is 1.6 Tons(3,527 lbs).

Comparing with hydraulic jack, the scissor jack is conveniently and easily to operate.

The product highlight is our saving strength design,it can let you feel easy to operate the scissors jack.



Usage Method:

1. Fasten the rest three tires using pads or bricks

2. Turn the jack by hand until the jack elevate the vehicle botton.

3. Put the ratchet wrench into the jack, and then turn the wrench. After that we can elevate the jack.

4.Adding engine oil (not included) into screw of Jack, it can make the screw rotation more smoothly, and reduce the jack noise.

• Net weight :2.86kg(6.3 lbs), Lift range from 4.09 inches to 15.15 inches
• With the scissor jack you can easily and quickly adjust the height of your vehicles. Thanks to the handy ratchet handle and the smooth-running spindle, changing tires is child's play from now on.
• The solid base plate also ensures a secure footing, corrosion-resistant, Strong metal construction made of steel, withstands high pressure
• Ratchet handle Saving Strength and Stable Design

User questions & answers

Question:	Will this work for my 2008 Ford Edge
Answer:	eBay, their overseas sellers are setup to meet this type of demand.
Question:	Will this work for my Kia Sorento
Answer:	Check this URL: https://en.wikipedia.org/wiki/JST_connector It's Wikipedia and has specs for every JST connector available. This kit is the SM series.
Question:	Will this work for a Toyota Prius
Answer:	These are only connectors. as long as you don't exceed the connectors limit. its up to you on how or what circuit you are going to use it for. Hope i helped you out
Question:	Made in China
Answer:	Yes

Product description

Dr.Roc Helps You To Proceed Without Hindrance

Most trusted auto accessories expert,millions buyers' choice.

It's difficult to lift your car with the scissor jack? 

This adapter make it very easy to use your scissor jack,when it is used with wrenches,especially with power drill or impact wrench.

Specifications: 

Material:Chrome Vanadium Steel(50BV30 Steel) + Composite Steel Material

Exterior:Black oxide finish 

Item Weight: 135 g(4.86 ounces) 

Product Dimensions: 50.7*41.4*24 mm (2.0 x 1.63 x 0.95 inches) 

Slot Size: 8.8 mm(0.35 inch) wide; 23.90 mm (0.94 inch) deep 

Bolt Length: 4.1 cm(1.6 inches) 

Bolt Dimensions: 9.7 mm(0.38 inch) 

( enough to fit most of scissor jacks ,to ensure this ,you can check the oval's size on your jacks)

Easy to use with the following tools: 

A.1/2" drive/impact drills/ratchet or standard drive sockets.    

B.13/16" lug wrench/tire iron or socket or easily add a half inch adapter to any drill.

Note: 

1.If you don't have a 1/2 inch hex or impact wrench,you can very easily get a standard drill bit to 1/2" adapter and use any cordless or corded drill with this tool and those difficult scissor jacks;

2.This adapter fits most of the scissor jacks in the market, including loop type(hole diameter>9.7 mm) or double eyelet type(hole diameter>9.7 mm, eyelet distance<16.5 mm);

3.There are rare cases some 1/2" drives can't fit this adapter,it is most likely the drive is not strict 1/2",Pls change another drive or contact us to return it.

• If you are worry about compatibility, please check the oval's size on your jacks.Product Dimensions: 50.7*41.4*24 mm (2.0 x 1.63 x 0.95 inches); Slot Size: 8.8 mm(0.35 inch) wide; 23.90 mm (0.94 inch) deep; Bolt Length: 4.1 cm(1.6 inches); Bolt Dimensions: 9.7 mm(0.38 inch).
• Sturdy: Power Saving Scissor Jack Adapter-Made of very solid chrome vanadium steel and new composite steel material. No more worrying during use.
• Compatibility: After we adopted standardized production, scissor jack adapter is suitable for most of loop type or double eyelet type scissor jacks in the market .
• Easy to use with the following tools: ▶1/2" drive/impact drills/ratchet or standard drive sockets; ▶13/16" lug wrench/tire iron or socket or easily add a half inch adapter to any drill; ▶ If you don't have a 1/2 inch hex or impact wrench, you can very easily get a standard drill bit to 1/2" adapter and use any cordless or corded drill with this tool and those difficult scissor jacks.
• Dr.Roc-Most trusted auto accessories expert,millions buyers' choice, excellent customer service.

User questions & answers

Question:	Will this work with wagan el2257 12v dc mighty impact wrench, 1/2 inch 12 volt electric impact wrench kit, 271 ft-lbs, tire repair tools with sockets
Answer:	The 1/2 drive will work. My impact wrench has beating motion that appears to me to hard on the adapter. In a pinch I would use an impact wrench.
Question:	will it work with a 20 volt 2 speed drill
Answer:	Don't know....I do not have a 20 volt 2 speed drill. But my cheap 120 vac drill does not have enough torque to turn it. Still I kept this item because it is easier to use on my scissor jack using a socket/socket wrench combination than the bent rod tool on a hole on the "tongue" of the jack. A 1/2 inch drive variable speed impact wrench would be best.. Also, I got this at much lower price after discount due to late delivery.
Question:	Can this be used to replace the handle on a Topwind tubular tongue Jack
Answer:	Not sure. It seems to be designed for a scissor jack only.
Question:	Is this product made in the USA
Answer:	There are no markings that indicate so. Probably like so many other things it is made in ...AS PRESIDENT TRUMP WOULD SAY... CHINAH !

• ★Lift range from 3.85 inches to 17.4 inches; Capacity of 2.5 Tons (5,511 lbs)
• ★Oversized base width for maximum support and stability
• ★Heavy-duty steel frame and saddle
• ★Ratchet handle, Saving strength design

User questions & answers

Question:	What country makes the Leadbrand black steel 2 .5 ton scissor jack
Answer:	I own the same exact stand without casters, to put casters on stand would take cutting and welding, but it could be done. Make sure you check height of stand before welding casters because it will make stand higher.
Question:	Can this be used for a Ford F
Answer:	What in the world do you need a manual for a jack? You tighten the knob and pump the pedal stand goes up loosen the knob and stand goes down
Question:	What the size of the Jack collapsed
Answer:	Not fast at all. Takes many pumps of the pedal
Question:	What size is the hex drive? 17mm? Thanks
Answer:	It's not to heavy, I would guess around 45 to 55 lbs . I know no one lists the weight ? Great lift though I use it on my KAWASAKI KLX 450R . I use it in my shed and store in basement for the winter, So it's not too heavy.

Product description

This 2 ton scissor jack meets or exceeds ANSI standards and has a heavy duty steel construction. Insert the jack handle into the hole of the handle socket. Make sure that the saddle is correctly positioned. To prevent damage to the jack, do not move the jack while the handle is intact in the socket. To raise load, use one hand to hold the front part of the handle, and use the other hand to turn slowly at the rear end of the handle clockwise. To lower load, use one hand to hold the front part of the handle, and use the other hand to turn slowly at the rear end of the handle counter clockwise.

• Lifting range is 5 inches to 13 inches
• Wide base (7.25 inches x 4.25 inches) for load stability
• Heavy duty steel construction
• Meets or exceeds ANSI standards
• Maximum capacity: 2 tons (4,000 pounds)

User questions & answers

Question:	Will this unit work with a standard hook-type foldable wrench
Answer:	It won't work with capacitor start motors
Question:	Specs state a minimum lifting start point of 5 inches. Is this the minimum height at which the jack attains enough leverage to begin lifting
Answer:	Without a photo tachometer the exact speed of the router can not be determined. When the speed control rocker switch is set to the variable position and the controller knob is turned to the highest setting, the maximum rpm of the router motor is limited to approximately 80% of full speed.
Question:	how to turn this
Answer:	Pumps need muth power in the beginning of their operation, so be careful. Otherwise numbers of specifications seems alright.
Question:	What is the fully collapsed height of the jack
Answer:	Yes, I would say horsepower matters, but this is related to the amperage. I use this speed control on a router that is also 15 amps and it works great. I'm not sure why you would want to change the speed of a power miter saw, but this unit should work fine.

Product description

Pro lift T-6906D is a 6-ton double locking jack stands. It features a high quality cast ductile Iron Ratchet bar and sturdy stamped steel base provide durability and longevity which makes ideal for home, professional and farm use. Always used in pairs, counter weighted pawls serve as a safe secure locking device to prevent the load from accidental disengagement. An attached pin lock provides support, locking the ratchet bar in place for an additional carrying point. One piece, multi position ductile ratchet bar provides strength and durability as well as a quick adjustment mechanism that securely locks into the desired position.

• Sturdy stamped Steel Construction with 6 ton capacity
• High quality cast ductile iron ratchet bar
• Double locks mechanism with both handle locks and mobility pin
• Height adjustment mechanism allows smooth upward movement while release handle locks and mobility pin
• Meets or exceeds ANSI/PALD standards. Ideal for home, Auto, truck service, farm, and shop use
• Comes with 2 Adjustable Beam and a Single stand;It has both commercial and residential applications

User questions & answers

Question:	Is the pin attached to the back so it doesn't get lost
Answer:	I took some measurements for you. Base weight 8.6 pounds Tongue weight 4.8 pounds Weight per stand 13.4 pounds each Total weight per set of 2 jack stands 26.8 pounds Tongue head contact size 1 inch x 3-31/32 inches Number of notches in tongue 11 Distance between notches in tongue: 3/4 inch steps Base stand dimensions 9 inches x 10-3/8 inches All height measurements are from floor to lowest U shaped contact point in tongue head (true resting point) Minimum lift height tongue base resting on floor: 14-3/16 inches Minimum height to first notch (non locking): 15-7/16 inches Minimum height to first locking notch: 16-1/8 inches Maximum lift height (locking) 22-7/8 inches. Note the lift is a little higher if you add the top of the saddle points, that is if the object is not resting in the U shaped saddle but at the top of the crown-ridges Weld quality-good/acceptable box and packing o.k. capacity as stated in literature: 6 tons per pair Country of manufacture: China Based on the above, I bought a second set, as I liked the first set.
Question:	Are these 6 tons each or 2 three ton stands that equal 6 tons
Answer:	Lifting range is 6-3/8" to 22".
Question:	How high they can extend and hold
Answer:	china
Question:	Please add some more info to your listing. What's the minimum and maximum clearance? What are the dimensions on the heads? Base
Answer:	These jacks will hold 3 tons or 6,000 pounds. Since you won’t be holding the entire weight of your vehicle you should be fine. These are great light weight jacks for tire changes and auto maintenance too.

Product features

Pro-LifT Double Pin Jack

Pin style jack stands offer the ultimate in security and safety. All Black-hawk Automotive pin style stands are offer some of the best values on the market today.

• Sturdy stamped steel construction
• Height adjustment mechanism allows smooth upward movement while release handle locks into position
• Ideal for auto, truck service, farm, and shop use

Product description

Camco's Leveling Scissor Jack Drill Socket reduces the time and effort it takes to raise and lower your scissor jacks. The adapter fits 3/8" or 1/2" power drills and works with all 3/4"Hex drive jacks.

• Reduces time and effort to raise or lower Scissor jacks
• Fits 3/8 inch or 1/2 inch power drills
• Works with all 3/4 inch hex drive jacks

User questions & answers

Question:	Why aren't people just using a 3/4 socket and a socket adapter, found in many toolboxes? Is there some advantage to this versus that
Answer:	This 3/4” drill adapters works great, I used an 18v battery Roybi drill worked really well. You could use a 3/4” socket if you use a deep well socket.
Question:	Socket with a slot at end for ldveling rv
Answer:	I use it on my 20' travel trailer
Question:	would this by chance work on a harbor freight scissor jack
Answer:	If they are 3/4" it should work
Question:	I'm curious to know what size cordless drills most people are using. I have a Dewalt 14.4 volt & it won't turn the screw drive
Answer:	I have 18v driver, but I would think a 14.4 should work fine as long as your screw drives for the trailers jacks aren't so rusty that they won't spin. Hit them with some WD-40.

Product features

Adjust in seconds

Significantly reduce the amount of time it takes to raise and lower scissor jacks with Camco’s Scissor Jack Socket. There is no more back strain using time-consuming hand cranks, simply attach the socket to your 3/8" or 1/2" power drill and let the power drill do all the work. It is especially convenient in inclement weather when you just want to get back inside.

The Scissor Jack Socket works with all 3/4" hex drive jacks and uses the torque from the power drill to raise and lower jacks. Simply insert the Scissor Jack Socket into your power drill, connect it to the scissor jack, and press the trigger on the drill to raise or lower the scissor jack.

The Camco Leveling Scissor Jack Socket is made of chrome plated carbon steel, so it is meant to last a lifetime. It has a one-piece construction for added durability and chrome plating that provides protection against corrosion.

Durable one piece construction

Attaches to your power drill

Adjusts scissor jacks in seconds

No more hand cranking

About Camco Manufacturing

Camco started in 1966 with one employee and one product. Today, over 40 years later, we have more than 350 employees, over 3,000 products and multiple manufacturing facilities in the USA and across the globe.

Competitive pricing, superior service, quality products and customer satisfaction are the foundations upon which Camco operates. Our friendly, knowledgeable customer service staff stands ready to assist our customers with any questions. At Camco, we take pride in meeting the ever changing demands of a challenging marketplace while serving you, our most valuable asset.