10 best camco car jacks

Product description

Camco's RV Stabilizing Jack Pads help prevent jacks from sinking into the ground. They are compatible with stack jacks, fifth wheel stabilizers, swing down stabilizers and awning arms. Not intended for use with hydraulic jacks. Each pad features 6. 5 inches x 6. 5 inches of usable surface area. For convenient storage, they interlock and include a handy strap. Constructed of heavy duty, UV stabilized polypropylene. Includes a set of pads. Made in the USA.

• Helps prevent jacks from sinking into soft ground
• Interlocking design and handy storage strap for easy storage
• Built in handle for ease of use
• Measures 6.5" x 9" x 1"
• Set of 4

User questions & answers

Question:	will this fit the scissor stabilizing jacks for a small 21 ft jayco baha
Answer:	Do you mean dimension - or size?
Question:	That's the diminutions of these pads
Answer:	Yes they are big enough to for scissor jack feet. That is what I have on my travel trailer.
Question:	Are these pads big enough for scissor jack feet
Answer:	The description states it supports up to 6000 pounds (3 tons)
Question:	How many pounds will they hold
Answer:	Yes, this same cord but the packaging was updated. Sorry for the confusion, but it is still safe for outdoor use.

Product features

Stabilizer Jack Pad

Camco's RV Stabilizer Jack Pads are used to help prevent jacks from sinking into the ground. Use them with stack jacks, trailer tongues, 5th wheel jacks and swing arm supports. They have a built-in handle and a storage strap is included for easy storage. They are constructed of durable UV stabilized resin for years of use. Their heavy-duty construction and rib design are optimized for increased strength. Be sure to use with flat side down to help prevent slipping and sinking. Contains 4 jack pads.

Product description

Camco's Leveling Scissor Jack Drill Socket reduces the time and effort it takes to raise and lower your scissor jacks. The adapter fits 3/8" or 1/2" power drills and works with all 3/4"Hex drive jacks.

• Reduces time and effort to raise or lower Scissor jacks
• Fits 3/8 inch or 1/2 inch power drills
• Works with all 3/4 inch hex drive jacks

User questions & answers

Question:	Why aren't people just using a 3/4 socket and a socket adapter, found in many toolboxes? Is there some advantage to this versus that
Answer:	This 3/4” drill adapters works great, I used an 18v battery Roybi drill worked really well. You could use a 3/4” socket if you use a deep well socket.
Question:	Socket with a slot at end for ldveling rv
Answer:	I use it on my 20' travel trailer
Question:	would this by chance work on a harbor freight scissor jack
Answer:	If they are 3/4" it should work
Question:	I'm curious to know what size cordless drills most people are using. I have a Dewalt 14.4 volt & it won't turn the screw drive
Answer:	I have 18v driver, but I would think a 14.4 should work fine as long as your screw drives for the trailers jacks aren't so rusty that they won't spin. Hit them with some WD-40.

Product features

Adjust in seconds

Significantly reduce the amount of time it takes to raise and lower scissor jacks with Camco’s Scissor Jack Socket. There is no more back strain using time-consuming hand cranks, simply attach the socket to your 3/8" or 1/2" power drill and let the power drill do all the work. It is especially convenient in inclement weather when you just want to get back inside.

The Scissor Jack Socket works with all 3/4" hex drive jacks and uses the torque from the power drill to raise and lower jacks. Simply insert the Scissor Jack Socket into your power drill, connect it to the scissor jack, and press the trigger on the drill to raise or lower the scissor jack.

The Camco Leveling Scissor Jack Socket is made of chrome plated carbon steel, so it is meant to last a lifetime. It has a one-piece construction for added durability and chrome plating that provides protection against corrosion.

Durable one piece construction

Attaches to your power drill

Adjusts scissor jacks in seconds

No more hand cranking

About Camco Manufacturing

Camco started in 1966 with one employee and one product. Today, over 40 years later, we have more than 350 employees, over 3,000 products and multiple manufacturing facilities in the USA and across the globe.

Competitive pricing, superior service, quality products and customer satisfaction are the foundations upon which Camco operates. Our friendly, knowledgeable customer service staff stands ready to assist our customers with any questions. At Camco, we take pride in meeting the ever changing demands of a challenging marketplace while serving you, our most valuable asset.

Product description

EAZ- 24' SCISSOR JACK 2PK

User questions & answers

Question:	Those who have bought these, are they still working well
Answer:	Yes 8 mounts now. Holds 6423 lbs trailer moved every 10 days and re set up. We keep them greased and there work like day one.
Question:	Will these lift my Winnebago class A 15,000 pounds
Answer:	Not sure. We bought these for our Imagine 2500RL 30’ TT

Product description

The Ear-Lift J-Hook Drill Attachment aids in raising and lowering your RV's scissor jacks. Quick and easy to use, it eliminates hand cranking and is for manual scissor jacks only. The J Hook fits all 3/8-inch drills and is zinc-plated.

• Helps Raise and Lower Scissor Jacks: Aids in raising and lowering your RV's scissor jacks
• Compatibility: For use with manual scissor jacks
• Fits: Fits all 3/8-inch drills
• Durable Construction: Zinc-plated construction
• Time Saver: Eliminates hand cranking

Product description

Camco Olympian RV Aluminum Stack Jack Stands are designed to get secure and level RV positioning and stability. They are made from durable cast aluminum and each can support up to 6000 lb. These Jack Stands extend from 11" - 17" and are easy to use. Comes with a set of stack jacks.

• Stabilizes and Levels your RV: Designed to get secure and level RV positioning and stability
• Superior Strength: Each jack supports up to 6000 pound
• Durable Construction: Made of cast aluminum
• Adjustable: Extends from 11 inch to 17 inch
• Includes: Comes with a set of stack jacks

User questions & answers

Question:	Does anyone know the size of the hex nuts that come with these jacks? I need a spare and Home Depot is useless for anything larger than
Answer:	Per Camco customer service on July 6, 2018: "I’m sorry we do not sell that nut by itself. The nut size is M20 x 2.5. Thank you."
Question:	I see at-least two people used these to make a standing desk. To those people: how stable is the desk?(how far did you lift it
Answer:	Very stable, would buy them again, a very good deal
Question:	What's the difference between these and car jack stands? Can you use these for cars
Answer:	These are NOT car jack stands - (that are designed to hold cars off of the ground). These are RV jack stands that are designed to stabilize and level a parked RV with the tires on the ground. Big difference. No way is "one stand" rated for 6000lbs (3 tons). The base is light-duty aluminum. DP NOT USE THESE AS CAR JSCK STANDS.
Question:	for 4 of these which are each rated at 6000lbs each, free two day shipping (prime) and it's aluminum. Why shouldn't I get these for my car
Answer:	These are maybe 1/10th as tough as car jack stands. The capacity rating is ONLY true when shared with the wheels, NOT for lifting that amount of weight fully off the ground, which is how car jack stands are rated. They are also only designed for PERECTLY level loads, the slightest angle and your vehicle will either slide off, or these tiny things will fall over sideways. There are two reviewers here who provided pictures of these failing. In short, don't do it... get proper automotive jack stands. Too many people die while working under their vehicles each year.

Product features

How It Works

Without proper stabilization, your RV will rock with any little movement. Camco's Olympian Aluminum Stack Jacks are designed to stabilize and level your RV. Made of durable cast aluminum, they can support up to 6000 lb. each and are adjustable from 11-inches to 17-inches. Easy to use, simply position each stack jack underneath your RV, and raise to the proper height to reach appropriate leveling and stabilization. When finished, they are easy to pack up and store. The stack jacks come in a pack of .

Product description

Replacement scissor jack speed crank handle. Use with any of Camco's leveling scissor jacks.

• Replacement crank handle for Camco's leveling scissor jacks
• Heavy duty
• Padded handle for comfortable grip
• Quickly and easily raise and lower your RV

User questions & answers

Question:	Will this work with an 11/16 inch bolt head? Need it for an old school jack. Thanks
Answer:	The handle fits a 3/4 inch hex head exactly. It is hexagonal so would probably fit sloppy on a 11/16 hex bolt head
Question:	do all sissor jacks have same size for wrench
Answer:	NO. The one I ordered was the wrong size for my jack. They should list the size in the info section of the item description.
Question:	Will fit on my Chevrolet Traverse jack
Answer:	This has a 3/4" socket so it will work with any 3/4" hex drive jack.
Question:	If I cut it off, will it fit in a 1/2 inch drill
Answer:	Really don't know; are you talking about just the hex socket, or are you talking about cutting off the shank (so the shank fits a 1/2 inch drill?) Don't think the diameter of the shaft will fit a 1/2 inch drill (Trailer is in RV storage, so I can't measure the diameter of the shaft.) Personally, I use my impact driver with a long extension and a 3/4' socket to loosen the jacks, then I use this to tool to crank the jack to the retracted position. To extend the jacks, I use this to crank the jacks down, then I use my impact driver for final leveling. (The pin that holds that socket on the cranking bar broke after I tried to wrench up the second jack; it just won't handle the torque applied when it's cranking under a heavy load.)

Product description

Heavy duty blocks are safe and easy to use. They offer many options for leveling single wheels, dual wheels, hydraulic jacks, tongue jacks, stabilizer jacks, 5th wheel jacks and tandem axles. Customize your levels: Stack interlocking blocks to desired height. Strong and durable blocks. Patent pending. Each set comes in a convenient storage bag.

• 4 interlocking blocks stack to the desired height for safe and easy leveling
• Strong and durable construction
• Solid bottom to help keep them from sinking in soft ground
• Includes zippered storage bag with handle
• Made in the USA

User questions & answers

Question:	How do you get these from sliding on blacktop
Answer:	I don't know. Havenever camped on blacktop.
Question:	Will these work for a wooden swing set
Answer:	pretty sure if they can hold my 15,000 pound trailer they can handle a wooden swing set.
Question:	How many blocks is minimum for a small stack? 2,3,4? I just need to lift the front end of my class b rv a tiny bit
Answer:	One.
Question:	Could these be used to help level an above ground pool (put under legs
Answer:	I believe they could. I use them to hold my 3500 camper. I would be careful about them cracking over time though it's cheap plastic.

Product features

Interlocking Leveling Blocks

The Camco Leveling Block 4-pack allows you to stack the interlocking blocks to the desired height for safe and easy leveling. These blocks can be used with single wheels, double wheels, hydraulic jacks, tongue jacks, stabilizer jacks, 5th wheel jacks and tandem axles.

Camco’s RV Leveling Blocks make it easy to customize your levels. Simply stack the interlocking blocks together to your desired height. They have a strong, durable construction and a solid bottom to help keep them from sinking into the ground. Engineered with a patented design to optimize both strength and weight, resin is UV stabilized and built to last even when exposed to sunlight for extended periods of time. Bright, visible yellow color helps you see them so you don’t leave them behind. They can also be used to help prevent your stabilizers from sinking in soft ground. Camco's RV Leveling Blocks measure 8.5 inch x 8.5 inch and can be used with stack jacks, trailer tongues, 5th wheel jacks and swing arm supports. If dirt or debris build up in the leveling blocks, just knock it off and hose it out before storage. Product includes a zippered storage bag with handle to keep them all together when not being used.

How it Works

Once you have parked in your camp spot, use levels to determine whether or not your vehicle needs to be leveled. Determine the stack height needed and arrange the leveling blocks in front of the wheel in one of the approved configurations. Do not stack leveling blocks more than 4 inches high. Drive very carefully onto the blocks; it may be helpful to have a passenger step outside to guide. Once the vehicle is on the blocks and level, make sure to set the parking brake. When you’re ready to leave, simply drive off the blocks, park the vehicle, collect the blocks and place them back in the carrying bag.

About Camco Manufacturing

Camco started in 1966 with one employee and one product. Today, over 40 years later, we have more than 350 employees, over 3,000 products and multiple manufacturing facilities in the USA and across the globe.

Competitive pricing, superior service, quality products and customer satisfaction are the foundations upon which Camco operates. Our friendly, knowledgeable customer service staff stands ready to assist our customers with any questions. At Camco, we take pride in meeting the ever changing demands of a challenging marketplace while serving you, our most valuable asset.

Product description

Eaz-Lift's Olympian 24" Scissor Jacks fit pop-ups and trailers and allow for either bolt-on or weld-on installation. It has a certified 5000 lb. load capacity and is powder coated for maximum rust protection. Measures 4-3/8” high when fully collapsed and 23-3/4” when fully extended.

• Bolt-on or weld-on installation
• 5000 lb. load capacity
• Includes one scissor jack
• Fits pop-ups and trailers
• Powder coated for maximum rust protection

User questions & answers

Question:	Can anyone tell me about the life of this lift? I want to make a standup desk and i will be constantly cranking it
Answer:	only had 2 months but have used them to on a travel trailer about 20 times and it ways 2500ilbs and i use a cordless drill to do it
Question:	how much weight can they hold
Answer:	I'm using both of mine under 3k pounds of load, they are rated for 7500 pounds a piece
Question:	Does the socket or a handle come with the jacks
Answer:	Purchased in July 2018. Did NOT come with a handle or socket.
Question:	will a 3/4 inch socket fit the crank nut
Answer:	yes it will fit 3/4 inch.

Product features

Eaz-Lift 24" Heavy Duty RV Stabilizing Scissor Jack by Camco

Eaz-Lift's Heavy Duty Stabilizing Scissor Jack by Camco is a necessity for campers and RVers. This jack is constructed with heavy duty steel and is powder coated for maximum rust protection. Its compact size and simple to use design, can be easily stored in confined spaces for later use. It effortlessly stabilizes heavy vehicles and RVs with 5000 lb capacity and expands from 4" to 24" with infinitely adjustable height feature. Designed with a sturdy base that offers easy positioning and increased stability.

Compact Size and Heavy Duty Steel Construction

Eaz-Lift's stabilizing scissor jack is built with heavy duty anti corrosion steel. This jack is designed for supporting large vehicles such as rvs, campers and trucks up to 5,000 lbs. Coated with a powder finish resistant to corrosion and rust, makes this jack weather proof and long lasting.

Available in Multiple Sizes and Two Pack Bundles for Convenience

Eaz-Lift Scissor Jacks are available in 20", 24", and 30" heights to allow for different uses. Can be used as a rv or trailer jack, car jack, and most vehicles small or large. Also comes in a set of two!

Adjustable Height with Simple Collapsible Frame

The lifting height can be adjusted from 4'' to 24". Eaz-Lift's scissor jack is compact and user-friendly! Simple to use and easy to store.

Product description

The Camco Stabilizer Jack Support provides a strong, stable surface for stabilizer jacks when they don’t reach the ground, offering 7" of lift.

• Provides a strong, stable surface for stabilizer jacks when they don’t reach the ground
• Offers 7" of lift
• Constructed of durable, UV-stabilized polypropylene

User questions & answers

Question:	Can these be used under the leveling jacks on a class a motorhome when the site has a slight incline and rear tires are off the ground
Answer:	No
Question:	How much weight can these support each
Answer:	This is designed mare as a storage cover, I do trailer with mine but it tends to balloon up. So I put 3 bungees over it (front middle & rear) & then it stays put and No problems.
Question:	pack
Answer:	Up to 100" lengthThanks,Chris DeWaneMad Dog Products800-934-0840
Question:	If i stack 2 peices will it take the tongue load
Answer:	The storage bag is 18" L x 9" diameter.

Product features

Camco Yellow Stabilizer Jack Support - Provides a Sturdy

Description:

The Camco Stabilizer Jack Support is an 7-inch tall leveler that is great for use with stabilizer jacks that don't reach the ground. It can also be used with tongue jacks equipped with a footpad. The Stabilizer Jack Support is constructed of durable UV-stabilized polypropylene, and nests for storage if you own more than one.

• Provides a strong, stable surface for stabilizer jacks when they don't reach the ground
• Can also be used with tongue jacks equipped with a footpad
• Provides 7 inches of lift
• Nests for storage if you have more than one
• Constructed of durable, UV-stabilized polypropylene

Product description

Significantly reduce the amount of time it takes to raise and lower scissor jacks with Camco’s Quick Connect Scissor Jack Socket. There is no more back strain using time-consuming hand cranks, simply snap the socket into the 1/4" hex chuck of your drill and let the power drill do all the work. You can also common 1/4" hex extensions for extra reach. It is especially convenient in inclement weather when you just want to get back inside. The Camco Leveling Scissor Jack Socket is forged in one piece from carbon steel, so it is durable and meant to last a lifetime. It is zinc plated to provide protection against corrosion.

• Reduces time and effort to raise or lower scissor jacks; No need for hand cranks
• ¾ hex socket x 1/4 inch hex quick connect shank
• Designed to work with 1/4 inch hex quick connect chucks
• Works with all 3/4" hex drive jacks
• Heavy duty forged construction

User questions & answers

Question:	Do these have a warranty? First time to use and it broke
Answer:	3/4 = 19mm 7/8 = 22mm
Question:	How do I contact the manufacturer? It snapped during the third use
Answer:	The item number for the slotted jack drive is 48862 https://www.amazon.com/EAZ-LIFT-Drive-Assists-Anti-Corrosion-48862/dp/B07QRMPTYN/ref=sr_1_9?dchild=1&keywords=Camco+48862&qid=1608047769&sr=8-9
Question:	Is this 22mm
Answer:	Yes. But depends on who snug the shirt or jacket is.
Question:	Do you have the sloted one
Answer:	Yes it does help with continuous use of the brace but gradually. The size should match your shirt size. Please find the size chart in the product images

Product features

Camco RV Leveling Scissor Jack Socket Drill Adapter

Significantly reduce the amount of time it takes to raise and lower scissor jacks with Camco’s Quick Connect Scissor Jack Socket. There is no more back strain using time-consuming hand cranks, simply snap the socket into the 1/4" quick connect hex chuck of your drill and let the power drill do all the work. You can also common 1/4" hex extensions for extra reach. It is especially convenient in inclement weather when you just want to get back inside. The Camco Leveling Scissor Jack Socket is forged in one piece from carbon steel, so it is durable and meant to last a lifetime. It is zinc plated to provide protection against corrosion.

• Reduces time and effort to raise or lower scissor jacks. No need for hand cranks.
• ¾ Hex Socket X 1/4-inch hex quick connect shank
• Designed to work with a 1/4-inch hex quick connect chuck
• Works with all 3/4" Hex drive jacks
• Heavy-duty forged construction