13 best boat trailers

Product description

The Ironton Personal Watercraft and Boat Trailer Kit allows you to easily load, transport and unload your jet ski/personal watercraft. Rugged steel frame features 800-lb. GVWR, 610-lb. load capacity. Road ready and meets DOT requirements. Assembly required. Fenders: Yes, Assembly Required: Yes, Ramps Included: No, Bed Tilt: No, Lights: Yes, Side Rails Included: No, Frame Material: Steel, Wheel Size (in.): 4.80 - 12, Coupler Size (in.): 1 7/8, Load Capacity (lbs.): 610, Jack Type: No, Overall Dimensions L x W x H (in.): 126 3/4 x 52 1/2 x 16 1/4, Brakes: No, Deck Material: Steel, Rear Gate: No, Deck Size L x W (ft.): 77 1/4in. x 40 1/4in., Gross Vehicle Weight Rated (lbs.): 800

• Rolls on 12in. tires
• Roomy bed size is 77 1/4in.L x 40 1/4in.W
• Overall size is 126 3/4in.L x 52 1/2in.W
• White powder-coat finish adds durability
• Includes lights, protective fenders and 1 7/8in. coupler

User questions & answers

Question:	Can you haul 2 kayaks on this trailer
Answer:	On this Ironton Personal Watercraft and Boat Trailer Kit the angle of the bunk boards are adjustable. There are 2 bolts to fix each bunk to the bunk support. You can loosen the bolt and put the bunks flat or the desired angle, then fasten the bolt.
Question:	I have a 17 foot aluminum boat will it work
Answer:	I have converted the trailer to carry my 17 foot canoe by replacing the tongue with a longer one. The canoe hangs over the rear 3 feet which works with a canoe, but perhaps not with a boat. Also, the canoe only weighs 75 pounds.
Question:	I have a double sit kayak 13.5 ft. Does it fit
Answer:	It will fit, but it will definitely hang out over the back by 3 or 4 feet. I suppose that is no big deal, but you should be aware of that. I used mine for a 16 ft canoe, but it hung off the back by about 6 ft, even after moving the front stop bar as far forward as possible. So I bought a 10 ft piece of steel tube and used it instead of the 5 or 6 ft tongue that comes with it. That allowed me to adjust it so my 16 ft canoe did not hang 6 foot over the back. Also, notice the two carpet covered boards? They are flat and straight, so they don't fit the curvature of the hull very well . . . just contacting at arc point of the hull . . . again, no big deal, but when it sits in the hot sun all day, the weight of the canoe pushes the floor of the hull up to conform to the flat boards. I may make some modifications for that. Also note there is no front roller for the bow to rest on. I had to buy a roller and make a bracket to support the front of the canoe. I also put a rubber V stopper on the front vertical stop bar. Finally, I added two brackets to the back to hold a strap . . . painted the whole thing black with silver wheels and put two BMW logo's on the wheel bearings just for fun. Otherwise, very happy with the trailer. Good Luck!
Question:	Would this work for a 12 ft Jon boat, 130 lbs ? Thx
Answer:	We have a 10.2' and I belive it should work for a 12' no problem.

Product features

Features + Benefits

• Rolls on 12in. tires
• Roomy bed size is 77 1/4in.L x 40 1/4in.W
• Overall size is 126 3/4in.L x 52 1/2in.W
• White powder-coat finish adds durability
• Includes lights, protective fenders and 1 7/8in. coupler
• Certificate of origin will be mailed separately. Please allow time for processing

Product description

PVC Post Guide-On. Adjusts Out to 13" each Side Fits Frames up to 3"W x 4-1/4"H 1-1/2" sq. 16 ga Pre-Galvanized Steel post Extends 18" Into 2" PVC tube for strength

• Mounting Hardware included; Sold in Pairs
• Adjusts out to 13" each Side
• Fits Frames up to 3" W x 4-1/4" H 1-1/2" square, 16 gauge pre-galvanized steel uprights 18" high
• For larger trailer frames check out our Large Frame U-Bolt Kit (11416): Fits trailer frames up to 3 inch wide x 5-1/4 inch tall
• 2" schedule 40 white PVC posts (2-3/8" actual OD)

User questions & answers

Question:	How wide do they adjust out to the side
Answer:	I just measured it. The bar will extend out to 17 inches.
Question:	are these strong enough to guide 18 foot bass boat in strong cross current
Answer:	I have an 18 foot deck boat. They have been quite helpful in cross winds and cross currents. I used to have to stand hip-deep in water as I pushed sideways to get us lined up on the bunks while my wife cranked the winch. Now I just pull it right in.
Question:	My trailer is wider than my boat by about 8 inches. Can the post installation be reversed so the post actually go inward instead of out
Answer:	The upright posts can be adjusted in and out to about ten inches or so. ,so shou!dn't be a problem for you.
Question:	how long is the horizontal leg that goes under the boat and connects to the trailer
Answer:	My boat is stored, so not handy right now. I have a Bennington 22' Pontoon boat and it was sufficient in length. Please note the horizontal portion of the leg is adjustable, not shown on the pic. It didn't even come close to maxing out on my boat. If putting on a Pontoon boat get the highest plastic tube avaiailable. Once the boat comes off the trailer, you can still see these when approaching, but once over the trailer they are below the sight line. Good luck.

Product description

Carpeted bunkboards provide proper center loading even in wind or side current conditions. 2'' x 4'' X 24" boards tilt to hug the hull and are covered with high grade marine carpet. Height of 21'' with adjustment out to 13" from frame on each side. Can be mounted on top of frame for extra height. Complete with mounting hardware to fit frames up to 3'' wide x 4-1/4'' high.

• precision metal stampings, fabrications and assemblies
• 2'' x 4'' x 24" boards tilt to hug the hull and are covered with high grade marine carpet; boards are untreated Southern yellow pine
• Height of 21'' with adjustment out to 13" from frame on each side
• Can be mounted on top of frame for extra height

User questions & answers

Question:	What color is the carpet black or charcoal
Answer:	Black
Question:	Is this the pair or one side of the guide
Answer:	Two guides... one for each side of the trailer... come in the oackage
Question:	Is the $72 price for one or two sides of the 2’ bunks
Answer:	both sides
Question:	What is better for boat loading? Carpeted 2' bunks or roller guides
Answer:	If you have a Pontoon style boat - carpet with 2 bunk boards on both side... and make sure they are tall enough to be seen when loading the boat out of the water. If you have a V-haul, no matter what size, rollers with bunk boards make life easier!

Product features

Guide-ON BUNKBOARD 2'

• 1-1/2" square pre-galvanized uprights, angled out at 75°
• 2'' x 4'' x 24" boards tilt to hug the hull and are covered with high grade marine carpet boards are untreated Southern yellow pine
• Height of 21'' with adjustment out to 13" from frame on each side
• Can be mounted on top of frame for extra height
• Complete with mounting hardware to fit frames up to 3'' wide x 4-1/4'' high

About Us

C. E. Smith Company, Inc. was established as a manufacturing firm producing precision metal stampings, fabrications and assemblies for a broad variety of industries. We are committed to providing precision stampings, innovative products. The entire team in our 85,000 sq. ft. manufacturing facility and our 60,000 sq. ft. distribution center is dedicated to providing the high quality products.

Stainless steel boating and fishing products includes an adjustable, completely stainless steel t-top, fiberglass electronic boxes, t-top storage bags navigation lights and antenna bracket. The line of stainless steel rod holders includes 2 way clamp models, adjustable clamp models, outrigger and flush mount models.

Product description

When looking for the best, get something Sturdy Built. Ideal for saltwater or freshwater use, this galvanized kit contains everything you need to mount your bunk boards (not included). These bunk brackets mount with the flat surface facing your boat trailers cross braces. The galvanized u bolt wraps around the brace, and the washers and nut secure the bracket in place. The slotted holes in the bunk support allow for height adjustment. Includes: swivel top brackets, slotted bunk brackets, zinc plated bunk bracket bolts, galvanized mounting U-bolts for the brackets and galvanized lag screws to secure boat trailer bunk boards.

• Heavy duty 11 gauge galvanized bracket construction. Ideal for freshwater and saltwater boat trailers
• Complete Kit: Includes galvanized and zinc plated mounting hardware as pictured. This kit is put together to be ready to assemble out of the box on your trailer cross members and secure your bunk boards to the swiveling tops
• Fits 3x3 boat trailer crossmember. The Included U Bolts fit around a 3 inch wide by 3 inch tall cross member.
• This Swivel Top style bunk bracket is the industry standard 12" height with slotted holes for multiple height adjustments
• The adjustable top bracket on this style bolster support allows you to align the angle to contour to your boats hull; whether angled or flat.

User questions & answers

Question:	What material are the u-bolts
Answer:	This kit contains Galvanized steel U-bolts and hardware
Question:	How much weight will these accommodate? Thanks
Answer:	Put these on a 16-foot v bottom with an 85 horse Evinrude and they seem to be holding up quite well I'm not sure on the weight
Question:	What are the U-bolt bracket hole diameters? 1/5", 7/16", 5/8" or
Answer:	Both the hole for the swivel top bracket and the u bolt slotted holes are 1/2".
Question:	Is this for the bottom and side bunks for the trailer
Answer:	Yes, this product, 12" Swivel Top Bunk Bracket Kit, has the function of supporting the Bunk Boards on your boat trailer. The included hardware will mount, as stated to a 3" x 3" cross member, and you will use the included Lag Screws to secure your bunk boards. Typically this type of bunk bracket supports 2 x 4's for the hull (bottom) of the boat, not generally the "sides". By Sides, you are probably referring to side guide boards, which have a different mounting application. Hope this helps!

Product description

When looking for the best, get something Sturdy Built. Ideal for saltwater or freshwater use, this galvanized kit contains everything you need to mount your bunk boards (not included). These bunk brackets mount with the flat surface facing your boat trailers cross braces. The galvanized u bolt wraps around the brace, and the washers and nut secure the bracket in place. The slotted holes in the bunk support allow for height adjustment. Includes: swivel top brackets, slotted bunk brackets, zinc plated bunk bracket bolts, galvanized mounting U-bolts for the brackets and galvanized lag screws to secure boat trailer bunk boards.

• Heavy duty 11 gauge galvanized bracket construction. Ideal for freshwater and saltwater boat trailers
• Complete Kit: Includes galvanized and zinc plated mounting hardware as pictured. This kit is put together to be ready to assemble out of the box on your trailer cross members and secure your bunk boards to the swiveling tops
• Fits 3x3 boat trailer crossmember. The Included U Bolts fit around a 3 inch wide by 3 inch tall cross member.
• This Swivel Top style bunk bracket is the industry standard 8" height with slotted holes for multiple height adjustments
• The adjustable top bracket on this style bolster support allows you to align the angle to contour to your boats hull; whether angled or flat.

User questions & answers

Question:	It looks like your 4 pack of 2x3 just sold out. Will these 3x3 work on a 2x3 crossmember? Won't the bolts just stick out farther
Answer:	I believe the bolts would just stick out farther. If it’s too long, you can just cut them off
Question:	It looks like your 4 pack of 2x3 just sold out. Will these 3x3 work on a 2x3 crossmember
Answer:	I can’t be 100% sure but the thread should be long enough to be able to fit. The length is just an 1” longer.
Question:	I’m looking to fix my jet ski trailer. How do i figure out if this is the right hardware for my job
Answer:	I used this on a jet ski trailer. I think these were actually larger than what I needed. Instead of 8" maybe I needed 6 or something, but they work great anyways. Measure the part of the trailer that you want to secure these around and that gives you the depth that you're looking for. I literally used these to mount extra bunks on my jet ski trailer.
Question:	Are these u bolts 1/2 inch and are brackets double dipped galvanized
Answer:	This kit features 1/2" diameter u-bolts, with hot dipped galvanized hardware and brackets.

Product description

Trailer Wiring Clips made of high duty metal,very durable and stable.

Securely and safely attaches wiring harness to trailer frames

Zinc plated steel clips, 3/8 inch wide

Dimensions: 3/4" x 3/8" x 1/2" (19.5 x 9.5 x 13mm), Package:25PCS Trailer Wiring Clips.

Package Include: 25Pcs Trailer Frame Wiring Wire Clips. Easy to Install: No cutting, Install directly.

If you encounter any problems while purchasing, please don't hesitate to tell us, we will try our best to help you solve.

• Trailer Wiring Clips made of high duty metal,very durable and stable.
• Securely and safely attaches wiring harness to trailer frames.
• Zinc plated steel clips, 3/8 inch wide.
• Dimensions: 3/4" x 3/8" x 1/2" (19.5 x 9.5 x 13mm), Package:25PCS Trailer Wiring Clips.
• Package Include: 25Pcs Trailer Frame Wiring Wire Clips. Easy to Install: No cutting, Install directly.

Product description

Smith's Multi-Sport Trailer ships to your door and is designed for easy assembly using common tools. Includes everything you need to carry a small boat, inflatable or PWC up to about 12' long. Its galvanized steel frame is built strong and has an ample 800lb. carrying capacity. Includes DOT approved lights, a pair of 5' adjustable carpeted bunk boards with dual supports, winch stand, winch, hook and strap, 4. 80x8" tires, and hitch coupler with safety chains. Rated for use at highway speeds. Winch stand can be mounted anywhere along the tongue to balance the load.  Proper load balancing is always critical for safe trailering!

• Unloaded Weight: 200lbs.
• Max Capacity: 800lbs.
• Gross Vehicle Capacity: 1000lbs.
• Overall Length: 140"
• Overall Width: 54"

User questions & answers

Question:	What is the top maximum speed for this trailer
Answer:	The Multi-Sport trailer is rated for highway speed, not exceed the posted limit.
Question:	What is max traveling speed
Answer:	I go a consistent 65 to 70 with two kayaks
Question:	Would it hold a fairly light 15 ft boat ?About 600 pounds
Answer:	You would have to see the manufacturing specs
Question:	I want to purchase a hobie angler 12, I am partially disabled and cannot put kayak on roof, will this work with a kayak
Answer:	The trailer can be used for a Kayak.

Product description

KUAFU Boat Trailer Guide Pole 1 1/2" Square 1/8" Thick Aluminum Square Guide On Poles Guide-On



Boat Trailer Guide on Poles do more than help you get your boat on your trailer; they help prevent a multitude of loading problems. They'll help you load faster and safer, keep you from loading too deep, keep your trailer position true.



Made of 1 1/2" square aluminum tubing with 1/8" wall thickness. They measures 46" tall and have 24.5" long legs for easy width adjustment to fit the sides of your boat as is goes onto your trailer.



Guide Pole is pre-bent at 90 Degrees to make contact with the side of your boat.



No instruction and professional installation is always highly recommended.



Shipping policy

Items will be shipped within 1 business day, does not include expedited service.



Return policy

If the product has any defects, please contact us for replacement within one month after receiving the goods.



Contact us

Your satisfaction is our greatest concern.

Technical support is available at any time.

Please contact us to resolve any issue before leaving any neutral or negative feedback, we will reply within one business day.

If you do not receive our response more than one working day, please check your spam or log in to your Amazon account to check if you have received our response.

• Boat Trailer Guide on Poles do more than help you get your boat on your trailer; they help prevent a multitude of loading problems. They'll help you load faster and safer, keep you from loading too deep, keep your trailer position true.
• Made of 1 1/2" square aluminum tubing with 1/8" wall thickness. They measures 46" tall and have 24.5" long legs for easy width adjustment to fit the sides of your boat as is goes onto your trailer.
• Guide Pole is pre-bent at 90 Degrees to make contact with the side of your boat.
• No instruction and professional installation is always highly recommended.
• BUY WITH CONFIDENCE. 100% SATISFACTION GUARANTEE: We are sure you will love our high quality products. However, if you are unsatisfied with either way, you have No-Questions-Asked, 30-DAY Money-Back Guarantee.

Product description

Extreme Max Post Trailer Guide-Ons do more than help you get your boat on your trailer; they help prevent a multitude of loading problems. They'll help you load faster and safer, keep you from loading too deep, keep your trailer position true and are especially helpful at night. Tall, easily visible, PVC-covered 40" steel posts work on bunk or roller-style trailer frames up to 3" wide x 4. 25" tall*. Extreme Max Post Trailer Guide-Ons are zinc-coated and intended for freshwater use only. Use in saltwater or brackish water will corrode and deteriorate the finish. *7" bolt kit available for trailer frames up to 5. 25" tall (Extreme Max 3005. 4050). 8" bolt kit available for trailer frames up to 6. 25" tall (Extreme Max 3005. 4053). 9" bolt kit available for trailer frames up to 7. 5" tall (Extreme Max 3005. 4056). 10" bolt kit available for trailer frames up to 8. 5" tall (Extreme Max 3005. 4059).

• One pair of Guide-Ons; 40” steel support beams with slip-on PVC guards total 45” height
• Easy, bolt-on installation
• Zinc-coated for freshwater corrosion-resistance, not intended for use in saltwater or brackish water
• Fits bunk or roller-style trailer frames up to 3" wide x 4. 25" tall
• Hardware to fit taller trailer frames (5. 25", 6. 25", 7. 5" and 8. 5") is available, see long description

User questions & answers

Question:	From the outside of my trailer frame to the outside of my pontoon boat is 22 inches. Will this work on my boat
Answer:	I don't think so. You need to let it overlap the frame a few inches to bolt it down. This may have it up against the pontoons. The bottom of the guide on post is 20.5'' to a small brace but 24'' over all. Hope this helps.
Question:	how far does the metal actually extend into the pvc? review said 60" but add states the guides are only 45". is viberation a problem
Answer:	I believe there are two sizes of the post you can buy. the 45" for smaller boats and the 60" for larger boats. I bought the 60" for my searay 260 sundancer. THe metal goes about half way or more up the middle of the PVC.. They are very sterdy with some flex to them. They work very well for me when driving my boat onto the trailer. The post keep the boat centered on the trailer very well. There is some vibration but not really a problem. The post vibrate more when the boat is not on the trailer while being towed but with the boat on the trailer they are either agaisnt the rub rail of the boat or within an inch which cuts down the vibration. I am very happy with the posts..
Question:	How big is tube part of the bracket that connects to the trailer frame? Thinking about adding a piece to our trailer that we can insert rail into
Answer:	About 1/4 inch.
Question:	My trailer frame is 5 inches tall, can you
Answer:	is there an extra charge for the longer u-bolts on the 5 inch trailer frame ?

Product features

Extreme Max Post Trailer Guide-On System - 45"

The Post Trailer Guide-On Systems contain Extreme Max's tallest guide-ons, paring perfectly with tall sided boats and deep boat launches. Attached to the trailer frame, the guide-ons helps center the boat on the trailer, preventing wind and currents from derailing your loading attempts. White PVC posts help provide excellent visibility through dark and murkier waters, or during darker hours when light is low.

Post Guide-On System

At the heart of each post guide-on, you'll find a steel frame strong enough to take anything you can through at it while keeping your boat lined up with your trailer. Over the the frame sits a sturdy PVC tube, providing a softer and more forgiving touch against you boat's hull. The whole system is adjustable width-wise to create a truly custom fit for your boat.

Direct-to-Frame Mounting

The guide-ons attach directly to the frame of roller and bunk style trailers with no drilling or cutting required, making them easy to move or reposition if needed. The standard hardware kit is included, allowing mounting on trailer frames up to 3" wide x 4.25" tall. Additional hardware kits are available for larger-framed trailers if required.

See hardware kit 3005.4050 for trailer frames up to 5.25" tall.

See hardware kit 3005.4053 for trailer frames up to 6.25" tall.

See hardware kit 3005.4056 for trailer frames up to 7.5" tall.

See hardware kit 3005.4059 for trailer frames up to 8.5" tall.

Also Available from Extreme Max:

Extreme Max 3005.2178 Post Guide-On System - 65"

Looking for something even taller? Look no further. The Extreme Max 3005.2178 Post Guide-On System - 65" offers the exact same benefits as the 45" model, but increases the frame and post height to a whopping 65" from the trailer to the end cap.

• ▽The material is premium metal, sturdy and solid. Wrapped high quality carpet, held on very securely.
• ▽With good clamping force, no flexing or twisting.
• ▽Make loading boat a breeze, keep your boat in line when loading.
• ▽Save your time and energy when fishing or drifting alone, in the company of this tool.
• ▽BUY WITH CONFIDENCE. 100% SATISFACTION GUARANTEE：We are sure you will love our high quality products. However, if you are unsatisfied with either way, you have No-Questions-Asked, 30-DAY Money-Back Guarantee.

User questions & answers

Question:	Why are staples in carpet facing the boat surface
Answer:	Haven't seen that.
Question:	What kind of wood is the bunk
Answer:	usually 2x4
Question:	does it comes in two with order
Answer:	Yes. One for each side of the trailer.
Question:	What size pipe will this clamp onto
Answer:	Pretty sure 2". I sent mine back. Didn't fit. I have a 4"

Product description

Maxxtow trailer light kits are built to meet or exceed DOT standards. Light kits are for trailers under 80 inches in width. Light kits (non magnetic) include 2 stop/tail/turn lights, 2 side marker lights, wiring harness and mounting hardware.

• Kit includes stop, tail and turn signal lights, two amber clearance lights and wiring harness
• Includes 23 and 4 foot 4-pole color coded wiring harness. Product Type: Lighting and Electrical
• High visibility LED taillights last longer than standard incandescent lights
• Complies with DOT standards; Side lens are with standard bulb. Corrosion resistant housing. For trailers less than 80 Inch wide
• Includes 23-foot wiring harness with UV coated jackets

User questions & answers

Question:	How do the main light assemblies mount to the trailer (i.e. there is no picture showing the back of the main housings
Answer:	The wires are included but are of the lowest quality. Mine turned to powder before the season ended.
Question:	Do tail lights have lights behind the small side red lens
Answer:	Yeah
Question:	Is a ground wire included in the 4 wire
Answer:	Not sure on your truck. My truck is a 2005 dodge 1500 and clears with no problem. Lights the back great!!
Question:	Does the wiring harness come with a 4-prong electrical hookup on one end? The pics just show wire with no hookup on the end
Answer:	Mine broke and they were so much trouble to deal with I had to file a claim. To answer your question both Amber turn signals work as the 4 ways. Good luck

Product features

MaxxHaul 70205 12V LED Trailer Light Kit

MaxxHaul trailer light kits are manufactured to comply with federal standards. Light kits are for trailers under 80 inches in width. Light kits include 2 stop/tail/turn lights, 2 side marker lights, wiring harness and mounting hardware.

Compliant With Federal Standards

MaxxHaul's High visibility LED lights are federally compliant and include LED side marker lamps.

High visibility LED taillights

MaxxHaul's High visibility LED taillights provide better performance, last longer, and uses less energy than traditional standard incandescent lights.

Harness

MaxxHaul's Improved wiring harness with UV coated jackets are more durable than traditional copper coated aluminum wires. Also includes 23 and 4 foot 4-pole color coded wiring harness for easy installation.

Ideal for

MaxxHaul's High visibility LED taillights are great for trailers, boats, and campers.

For the long haul

See it and try it for yourself as we guarantee customer satisfaction on our MaxxHaul products. Feel free to give us your honest review as we strive to achieve the best quality and pricing in all our products.

• LOW PROFILE SUBMERSIBLE - Our trailer light has everything you need to get your lighting system up and running. Each kit includes two 12V LED tail and turn signal lights and stainless steel hardware for easy fastening. All of our lights are built with corrosion resistant materials.
• LONG-TERM USE - Do you know that our trailer lights are completely sealed and submersible? Its acrylic len are engineered to block water out and ensure the circuits are protected. Super bright LED lights provide maximum visibility and safety. Fully operable in inclement weather, these heavy duty trailer lights are tough and durable for the long term.
• FULLY COMPLIANT - Our lights are 100% compliant with DOT FMVSS108 standards. This ensures that your lights are federally compliant for visibility, durability and reliability, which in turn secures the safety of others. Additionally, DOT compliant lights reduce the risk of liability in the event of property damage or personal injury.
• COST EFFECTIVE - Our premium LED lights are high quality and packed full with value for long lasting lighting. LED lights can last 30-40 times longer than standard incandescent bulbs, which saves you time AND money. Save yourself the headache of replacing bulbs more often than you need to and maneuver your trailer with confidence.
• FLEXIBLE SIZING - Our special LED trailer lights are outfitted for trailers measuring up to and over 80 inches wide. Our flexible sizing offers a one-size-fits all solution for trailers of different shapes and sizes.

User questions & answers

Question:	Are these red for tail , turn and brake? Pictures seem to show amber
Answer:	It does look amber in the pic but it is bright red. I'm very satisfied with mine.
Question:	Does this come with the wiring harness to plug it into a trailer hitch outlet
Answer:	Only pair of LED lights and mounting hardwares is included in this product.

Product features

Super Bright LEDs

- Replace your bulbs less often and maneuver your trailer with confidence.

High and Low Beam Feature

- LED lights last 30-40 times longer than standard incandescent bulbs.

LED License Bracket Light

- All of our lights are water proof and submersible.

Safety & Visibility

- Our premium LED lights are high quality and packed full with value for long lasting lighting. LED lights can last 30-40 times longer than standard incandescent bulbs, which saves you time and money. Save yourself the headache of replacing bulbs more often than you need to and maneuver your trailer with confidence.

Cost Effective

- Our special LED trailer lights are outfitted for trailers measuring up to 80 inches wide. Our flexible sizing offers a one-size-fits all solution for trailers of different shapes and sizes.

DOT Compliant

- Our lights are 100% compliant with DOT FMVSS108 standards. This ensures that your lights are federally compliant for visibility, durability and reliability, which in turn secures the safety of others.

Submersible

- Did you know our trailer lights are waterproof and submersible? That means you can maneuver your trailer into bodies of water, problem free. Please ensure wires connect correctly, with no risk of electric short before submersion. Fully operable in inclement weather, these heavy duty trailer lights are tough and durable for the long term.

Product description

Swivel Trailer Jack Double Wheel 2000 lb Tongue Twin Boat Towing 26" Length Lift



This 2,000 lbs Capacity A-Frame Trailer Jack With Dual Wheels Takes the Hassle Out of Hitching and Makes It Easy To Lift, Level, and Adjust

A-Frame Trailer Jack With Dual Wheels



Length Lift: 26"



Distance: 11"



14" screw travel and 8" drop leg travel



Height range: 15"-26''



Capacity: 2000 lbs



Lift Capacity: 4,000 lbs



Color: Zinc



Material: Steel



Back Mounting Hole Diameter: 2.25 inches



- Brand New

- Free Shipping within the Continental United States

- Same business day order processing before 12:30PM PDT

- Satisfaction Guaranteed

• This 2,000 lbs Capacity A-Frame Trailer Jack With Dual Wheels Takes the Hassle Out of Hitching and Makes It Easy to Lift, Level, and Adjust
• Length Lift: 26"
• Capacity: 2000 lbs - Height range: 15"-26''
• Free Shipping within the Continental United States
• NO installation instructions included

User questions & answers

Question:	How much does this jack weigh
Answer:	15 pounds
Question:	Will this bolt to a 6in trailer frame
Answer:	I use this on my 28 foot boat trailer and it works well
Question:	How has this jack held up
Answer:	The jack is very heavy duty and has held up well. Setup was versatile and double wheels give it better stability. A+
Question:	How "steer-able" is this trailer jack
Answer:	This jack is an absolute waste of money. Had it on a 21’ boat trailer and it didn’t last 2 months.