14 best obd ii scanners

• 😀【Vehicle CEL Doctor】The obd2 scanner can quickly help you read DTCs (engine fault codes), locate bad O2 sensor, access to emissions readiness status, turn off check engine light(CEL) or MIL(Malfunction Indicator Lamp) , reset monitor, read enhanced data and retrieve VIN of your vehicle.
• 😀【Accuracy】Live data in both graph and text forms. Accurately read vehicle error codes for most Worldwide cars, SUVs, light truck and 12V diesels equipped with Obd2. Besides, the car scanner also shows live vehicle sensors data in text and graph format and allows you to focus on any suspicious or symptom-specific data parameters.
• 😀【Worthy to Own】Recommended by Mechanic Scotty Kilmer on Youtube. Supports data logging and Printer compatible. Unique PATENTED design, clearly arranged keypad, 2.8" wide color screen with Life-Time Free software update and 1 year quality assurance, it deserves to own. Supported by EXCLUSIVE engineer and service team for product and service quality. (Please note currently the package does not include a CD. )
• 😀【Smog Check Helper】Read/Erase and I/M readiness hot keys make it easy to use this car computer reader right out of the package. Red-Yellow-Green Leds and build-in speaker indicate the readiness status for smog test. The obdii scan tool also help catch intermittent problems and confirm repairs during a drive cycle, so that help you quickly determine the health of the car.
• 😀【Home Necessity】NT301 car scanner is open to global customers. No battery required, it is charged directly from the OBDII interface in your vehicle (please turn your vehicle ignition on), making it convenient for Home and Autoshop Mechanics. It is recommended as a necessity in your toolbox and one of the best gifts for father. (Quick Start Guide is included in the package.)

Product features

FOXWELL NT301 OBD2 SCANNER

As everybody who has cars knows, people always spend hundreds of even thousands of dollars on their vehicles just because the engine light was on. However, most of them don't know they could make it off themselves with dozens of dollars - using NT301 obdii code scanner. This auto code reader could resolve most reasons which caused engine light on, and tell you what’s wrong with your car engine, and if it is necessary to be sent to workshop. Altogether, the Foxwell NT301 car diagnostic scan tool would save you much time and money. It is also a great choice if you are looking for an obd scanner well-built, easy-use with wide vehicle coverage. (Please note, UPDATE IS NOT NECESSARY before utilization, and NO NEED TO REGISTER on Foxwell website before update. The upgraded NT301 cable is long enough to use at the passenger seat. )

Product Features:

1. Supports multiple code requests: Generic, manufacturer specific and pending codes.

2. Clears codes, turns off Check Engine Light (CEL) and resets monitors.

3. DTC definition can be automatically displayed after reading, press "HELP" button with DTC guide for possible causes if codes show the small "?" icon.

4. Reads freeze frame data which shows engine conditions such as fuel trim, fuel pressure, engine coolant temp, etc. at the time the Malfunction Indicator Lamp(MIL) was set.

5. Reads, records, graphs & playbacks(data logging) live sensor data.

6. Reads live O2 sensor/on-board monitor test data.(Full OBD modes including Mode 6 and Mode 8)

(Beeping: means your NT301 has diagnosed faults codes in your car. If you do not wish to hear the noise, please enter Settings to set it.)

Full OBD Service Modes

The Foxwell NT301 OBD2 universal check engine light tool is made to easily read and erase engine codes. It is an enhanced OBD II and EOBD scanner that covers all obd2 protocols and all OBD diagnostic services, therefore it will work with virtually any vehicle equipped with obd2 and view more powertrain diagnostic data than other obd2 scan tool.

Specially Designed for Home Diagnostics

The code reader car diagnostic tool is specifically designed for car owners to identify problems with their vehicles before taking them to a mechanic. It is therefore ideal for use at home, and is very easy to use. Moreover, it will save lots of car maintenance costs for you. Simply plug it in and hit enter. It supports all OBD II functions, and will therefore work for all vehicles compatible with standard obdii protocols.

Enhanced OBD II functions

NT301 obd2 scan tool can not only read and clear engine fault codes, save money for you, but also have some enhanced functions which could help you find some deep problems so that makes your diagnosis easier.

LED Notifications: Red-Yellow-Green LEDs and build-in speaker indicate the readiness status for smog check. This engine diagnostic tool can also help catch intermittent problems or confirm repairs during a drive cycle.

Data Log: The NT301 engine code reader records PIDs for later use to help you diagnose intermittent driving performance problems which can not be determined by any other methods.

DTC Help: Press "HELP" button with DTC guide for possible causes if codes show the small "?" icon.

VIN Retrival: Automatic VIN acquisition and decoding make it much easier to read manufacturer specific codes and enhanced mode 6 data.

Print Data: If you are unable to determine the problem, you can print out the diagnostic data and send the data to your mechanic for help.

Save Time and Money

Perform a complete diagnosis of your car anytime, anywhere with Foxwell NT301 check engine light diagnostic tool. It is designed for fast use so you can get the results you want in the shortest time with one-click hot keys for reading/clearing DTCs. It enables you repair the problem yourself, or let you know exactly what needs replacement in case you need to take your car to a repair shop. This helps you avoid blind maintenance and repair costs that could amount to hundreds or thousands of dollars. You also avoid being pushed to buy parts that you do not need because you know exactly what is wrong with your vehicle.

To know if you are ready for a smog check, press I/M button(rubber) for 3 seconds.

User-friendly Design

Hand-held size, clearly arranged keypad, menu-driven navigation, hotkeys and 2.8'' color screen together make the engine tool extremely easy to use.

What live data can be read by this device?

How much data can be read depends on the vehicle, there are over 40 graphing live data (Download the Specification Sheet to get a whole list), to list some: FUELSYS(fuel system status), LOAD_PCT(Calculated load value),ECT(Engine Coolant Temperature), SHRTFT(Short term fuel trim-bank), LONGFT(Long term fuel trim-bank), Engine RPM, VSS(Vehicle Speed Sensor), SPARKADV(Ignition timing advance for cylinder 1), IAT(Intake air temperature), MAF(Mass Air Flow), TP(Absolute Throttle Position), O2SLOC(Location of Oxygen Sensors), O2B1S2(Oxygen sensor output voltage (B1-S2), SHRTFT(Short term fuel trim), OBDSUP(OBD requirements), MIL_DIST( Distance traveled while MIL activated), EQ_RATB1S1(Equivalence Ratio Bank 1, Sensor1), O2B1S1(Oxygen sensor output voltage), EVAP_PCT(Commanded Evaporative Purge), etc.

Optional Carrying Case

With this Foxwell NT301 protection carrying case, you can prevent it from being damaged whether you place it in a trunk, toolbox, or garage.

Can it be upgraded on MAC system?

Sorry, the NT301 scan tool can be updated on Windows systems only(including windows 10), please visit Foxwell official website and download NTWonder and update.

Will it read ABS/ airbag codes?

Sorry, NT301 obdii scanner is able to read and clear check engine information which is part of OBDII system, but it cannot work on non-OBDII systems(ABS/airbag/oil service light,ect.). While FOXWELL NT630 Plus can reset airbag/abs service light, FOXWELL NT614 Elite support transmission and can reset oil service light and EPB, and FOXWELL NT624 Elite can do a full-system diagnostics.

• Classic design, fast scan and clear trouble codes, even a beginner can use this unit to read the error code, find out what the problem is and perhaps fix it. Save money and time.
• Works on MOST 1996 US-Based, 2000 EU-Based and Asian cars, and newer OBD II & CAN domestic or import vehicles. Supports English, German, French, Spanish, Finnish, Dutch, Russian and Portuguese.
• Easily determines the cause of the check engine light. I/M monitor readiness test, turn off the MIL (check engine light) as well as view freeze frame data. Read hard (memory) / pending (intermittent) and historic codes and show definitions.
• The AD310 scanner is well built with a large LCD display (128 x 64 pixel) that has white backlight and contrast adjustment, indicates test results directly. No need any Batteries or Charger, gets the power directly from the OBDII Data Link Connector in your vehicle.
• It's equipped with a 2. 5 feet long cable and made of a very thick flexible insulator. There are 4 buttons on AD310. The Up and Down button for scrolling the menu, the Enter and Exit button allow for navigation back and entering menu.

Product features

Key Features

Code Definition

• Read and clear your Check Engine Light and all other vehicle systems. Get your unlimited free vehicle specific Repair Reports, generated from our database of millions of fixes verified by Professional Automotive Technicians
• As easy to use as a code reader with all the capabilities of an expensive handheld scan tool, plus the benefits of your smartphone or tablet (free app updates, portability, saving data, interactive graphing of live data)
• Officially licensed and certified for Apple and Android devices
• The BlueDriver App and BlueDriver Sensor work exclusively with each other to ensure quality
• BlueDriver is the Professional OBD2 Diagnostic Scan Tool trusted by mechanics and developed by Professional Engineers in North America

User questions & answers

Question:	Will the device display "short term and long term" fuel trim data
Answer:	Thank you for your question. This tool will have free future updates, but cannot be guaranteed for life. This tool was just released less than a year ago so tool is already up to date. The next available update will be sometime next year. The updates will always be free.
Question:	Will is run a abs bleeder test
Answer:	Thank you for your question. The 3160RS never needs to be charged so no charging cable is required. The 3160RS and all of our code readers link to a vehicle through that vehicle's 10-15 amp accessory fuses. If any of the vehicles accessory fuses are blown, tool will not link to vehicle. Batteries for this tool are not needed as well. Batteries are optional and are only used to pair tool to Bluetooth/Wifi without being linked to vehicle, and to look at stored information in tool if not connected to vehicle.
Question:	so the device is 100 and u have to buy more apps
Answer:	Thank you for your question. Yes, there is a light at the end of the DLC cable plug.
Question:	Do you only hook up to it when check engine is on or it stays plugged in
Answer:	Thank you for your question. The 3160RS will support TPMS, steering angle reset, EPB, ABS brake bleeding, transmission temperature, oil level, oil life, and brake pad life for most 1996 and newer vehicles. The 3160G doesn't offer any of these features. The 3160RS just came out less than a year ago and will have free, future updates. The 3160G has been out for almost 5 years now. The 3160RS uses are RS2 app which is only compatible with a smart phone or tablet. The 3160G uses our original RS software which is compatible on a computer, laptop, or smart phone.

Product features

The Right Fix. Always.

BlueDriver will match your vehicle's make, model, and trouble code to a specific fix from a database of millions of repairs. Your Repair Report will always contain fixes that have been verified by ASE Certified Technicians, so no more googling unreliable fixes that waste your time and money.

The BlueDriver Sensor, paired with the free BlueDriver App (iOS or Android), gives you a complete vehicle repair solution. No other scan tool or code reader offers this level of insight into how to fix your vehicle.

BlueDriver Offers More. Period.

BlueDriver reads (and clears) all the codes the other guys read and the ones they don't. BlueDriver's Enhanced Diagnostics give you complete access to information normally only accessible to professional mechanics on their most expensive scan tools.

What are ENHANCED diagnostics?

All vehicles with an OBD2 port are required to output basic information when the Check Engine Light comes on. However, a lot of important information (such as ABS, Airbag, Climate Control, etc.) is left behind by other scan tools and code readers. Only BlueDriver gives you the complete set of diagnostics on a wide range of manufacturers.

Get Enhanced Diagnostics On:

• NOT COMPATIBLE WITH iOS DEVICES - (iPhones, iPads etc); OUR BLUETOOTH OBD2 scanner IS ONLY COMPATIBLE WITH ANDROID OR WINDOWS DEVICES; For iOS devices, see our WiFi OBD Reader
• READ & RESET - Our OBD2 diagnostic scanner tool will work on all cars purchased in the USA model year 1996 or newer; Unlike other OBD2 scanners, ours works on ALL OBD2 protocols including J1850 and CAN; With our scan tool you can read & reset the check engine light on your car with ease
• REAL TIME - Monitor the diagnostic sensors in your vehicle in real time for things like O2 data, fuel pressure, EVAP system & more; Car reporting an EVAP code? Check your O2 readings to see which sensor is faulty and get it fixed; React quickly to problems like a professional mechanic
• HUGE APP SELECTION - 3rd party app must be downloaded to use; Choose from many OBDII apps such as Torque Pro, Piston, Dash Command, OBD Fusion & more; Some OBDII readers limit you in which apps you can use, not BAFX Products; Choose an app at a price that meets your needs
• This OBD2 scanner does not read ABS, SRS, TPMS or Oil Change lights; WARRANTY - 2 Year manufacturer warranty with USA based friendly support staff; Don't be left stranded by support

User questions & answers

Question:	Will it read ABS codes
Answer:	I do not know...if you have a security light flashing I would go to an Auto Zone they will do a free scan to tell you what is wrong with it and if it can be fixed or you may have to go to a dealership to have it fixed ....
Question:	Does this work with Windows Phone
Answer:	The Maxiscan MS300 is also an Autel product. It is a legacy product that has been superseded by the Autel AutoLink AL301¹. As is customary for these entry-level devices, it only reads / reports the generic OBD II codes. To move up to manufacturer specific codes one must move up to the Autel AutoLink AL319². Keep in mind that not ALL manufacturer specific codes are possible to read / report on. Some are kept secret by the vehicle manufacturer to ensure the dealer techs get a shot at your wallet once in a while. ^_^¹ http://www.auteltech.com/autelcms/Code%20Readers&Code%20Scanners/357.jhtml² http://www.auteltech.com/autelcms/Code%20Readers&Code%20Scanners/358.jhtml
Question:	can i leave it plugged in
Answer:	Yes.It has an I/M Readiness mode that is able to show you the details of the readiness of each major emission monitor. There is even a button on the device that can select this directly without having to navigate through the menus.There is also a lamp on the device that indicates if any emission monitor is not ready.It is my understanding that the requirements for I/M readiness for each vehicle may differ from state to state.I had a problem with an air monitor coming ready after I identified, resolved, and cleared the underlying code. It took miles of specific type of driving to clear this monitor status (which cannot be cleared by the device.)When I returned to the inspection station I was informed that all monitors are not required to be ready to pass New York state inspection, and that my extra driving for this situation was unnecessary.
Question:	does it pick up abs codes
Answer:	It gives a text explanation of the code (eg. Nissan code P1135 = 'Intake Valve Timing Control Bank 2'). Beyond that, you're having to look online or in service manuals to determine what the message actually means and how to resolve it.

Product features

Quickly Diagnose and Analyze Car Problems

Warning lights flashing up like an airport runway? Tear your eyes from that depressing dashboard and connect your BAFX Products Diagnostic Car Scanner & Reader Tool.

See what the issue with your car is within moments, and depending on your model you can -

•Read and clear your ‘Check Engine' light

•Identify those annoying car troubles before they become serious

•Get readings on your emissions to ensure you’ll pass any tests

•Check you air/fuel ratio •Confirm your O2 sensors are working properly

•Obtain info on a variety of other car readings

Reliable and Consistent

It’s no secret that many diagnostic car scanners on the market aren’t very dependable.

Either they only work on a limited number of car models, don’t pick up on important issues, or simply suffer from bad connectivity which makes them inconsistent and difficult to use.

At BAFX Products we’ve made it our mission to bring you a diagnostic scanner with solid Bluetooth connectivity that works on the broadest range of car models.

Put simply, at this cost it cannot be beat.

Works on Most Car Models After 1996

While most competitor’s products only work on a limited selection of vehicles, ours works across a broader range of protocols.

The result is that ours are far more likely to work on your car. And your wife’s car. And your friends’ cars…

Android and Windows Compatible

Who says iOS users get to have all the fun?

This product is specially constructed to work exclusively with Android and Windows devices,

Simply install a suitable third-party app (we recommend ‘Torque Pro’) and get to work!

Can Be Used Internationally

Think this diagnostic scanner can only be used in the good old US of A?

Think again, because it can be put to use on a wide selection of cars in a broad range of countries.

If you want to know if it will work on your car model and in your country then simply send us a message to find out.

• Turn your iPhone, Android device, or Windows PC into a professional-grade diagnostic scan tool
• Recommended adapter for FORScan, Torque, BimmerCode, Dashcommand, AlfaOBD, Carista and many more
• Enhanced OEM support for Ford, GM, Mazda, Nissan/Infinity, Toyota/Lexus/Scion, Honda, Hyundai, Kia
• Clear Check Engine Light and get more live parameters (ABS, SRS, TPMS, etc) than any other scanner
• Over-voltage and battery drain protection, firmware updates

User questions & answers

Question:	Will this read enhanced codes for 2008 silverado? srs,abs,tpis
Answer:	Yes. Enhanced support, including ABS/SRS codes for GM vehicles is available through a free add-on in the OBDLink app for MX+ users.
Question:	Will this work with my 2001 Ford Taurus
Answer:	Yes, MX+ will work with your 2001 Ford Taurus and all other 1996 and newer cars and light trucks sold in the United States to read generic OBD-II information. Using the Ford add-on you can also read and clear OEM trouble codes, such as ABS and SRS, along with viewing dozens of live parameters.
Question:	What version of Bluetooth does this new MX+ model use
Answer:	Hello, The OBDLink MX+ uses BT version v3.0 + EDR + iAP2
Question:	Will this do abs and srs codes
Answer:	Yes. Currently, enhanced diagnostic support (including ABS) is available for Ford, Lincoln, Mercury, Mazda, Toyota, Lexus, Scion, Nissan, Infiniti, GMC, Buick, Cadillac, and Chevrolet, with support for other makes coming soon. See the “Manufacturer-Specific Enhanced Diagnostics Support” document for supported model years and supported modules.

Product features

OBDLink MX+, Bluetooth OBD2 Scanner and Vehicle Performance Monitor

This pocket-size adapter won't obstruct driver legroom and features unmatched performance, intelligent sleep mode, hacker-proof security, exceptional third party app support, and free lifetime firmware and software updates.

The free OBDLink app offers outstanding features that makes it easy to access, graph, log and export real-time engine data. Plus, your car's data can be directly downloaded or instantaneously uploaded and shared with others using DropBox.

OBDLink MX+ provides wireless connectivity for all OBD-II protocols, plus advanced automotive networks commonly used in many late-model GM, Ford, Mazda, Nissan and Toyota vehicles. For supported GM models, you can control windows, door locks, and even remotely start your engine with the 3rd-party obdCANex Android app.

More Coverage

OBDLink MX+ works with all 1996 and newer cars and light trucks sold in the United States (except hybrid or electric vehicles). The OBDLink proprietary connection algorithm enables MX+ to connect to more makes and models than any other scan tool. It also supports EOBD, JOBD, and all other international variants of OBD-II. Read and clear codes on all OBD-compliant vehicles, NO EXCEPTIONS.

More Features

OBDLink MX+'s functionality is limited only by the imagination of the programmers that write the apps. Apps that exist on the market today, can be used to:

• Measure and display fuel economy
• Remote start your car (on select vehicles)
• Create a digital dashboard or a heads-up display
• Buy a used car with confidence
• Lock/unlock doors (on select vehicles)
• Clear the ‘Check Engine’ light, and investigate its cause
• Display, graph, and log hundreds of real-time parameters

More Secure

Unlike other OBD adapters, MX+ does not use an easy-to-guess PIN and requires physical access for the initial pairing. It doesn't broadcast its presence and employs strong encryption — sensible precautions to keep hackers out of your vehicle's network.

More Apps

OBDLink MX+ works with dozens of popular third-party apps like Torque, Dash, FORScan, DashCommand, obdCANex and Harry's Lap Timer to unlock enhanced performance, save fuel, change vehicle settings and even control door locks and remotely start the engine on select vehicles.

Note: many apps are currently available exclusively on Android; check with app provider to confirm compatibility.

More Data

OBDLink MX+ supports GM-LAN and Ford-MSC proprietary vehicle networks that provide access to thousands of additional parameters that are off-limits to all other wireless OBD scanners, including BlueDriver and FIXD.

With third party apps, you can enable convenience features (including remote start and door lock/unlock) and change configuration on select models.

More Reliable

When you turn off your engine, OBDLink MX+ goes to sleep and won't drain your automobile's battery. Its sophisticated triggers will wake up MX+ when you connect via Bluetooth, unlock doors, or crank the engine.

MX+ includes overvoltage/load dump protection, a feature critical for any OBD device that is designed to be powered from the vehicle's 12-volt system.

• TURN OFF CHECK ENGINE LIGHT: Autel MS309 OBDII scanner is an easy-to-use plug-n-play check engine code reader that read and clear codes. This little code scanner retrieves generic (P0, P2, P3, and U0), manufacturer specific (P1, P3, and U1) codes, and pending codes and displays DTC definitions on the TFT color screen. It can check engine related fault codes, easily find out what caused the check engine light comes on, turn off MIL light(Malfunction Indicator Light).
• FREEZE FRAME DATA FOR ACCURATE DIAGNOSIS: This MS309 check engine code reader comes with viewing freeze frame function that enables you to retrieve data recorded in the ECU of the condition under which the fault occurs to figure out why the check engine light is on and cut down test drive cycle verification time. It includes important engine parameters such as RPM, vehicle speed, mass airflow, engine load, fuel pressure, short/long term fuel trim, engine coolant temperature and etc.
• READINESS STATUS TO PASS SMOG CHECK: The Autel MS309 car diagnostic scanner tool comes with I/M Readiness function to check the operations of the Emission System on OBD2 compliant vehicles. It includes vehicle-specific number of monitors like misfire monitor, fuel system monitor, comprehensive components monitor, O2 sensors, EVAP system and etc, making this OBD2 scan tool an excellent scan tool to help get your vehicle ready to pass the annual smog check.
• UNMATCHED COMPATIBILITY: Autel MS309 compact pocket code reader supports all OBD2 protocols: KWP2000, ISO2000, ISO9141, J1850 VPW, J1850 PWM and CAN. This OBD2 code scanner is compatible with all OBDII-Compliant vehicles, passenger cars or light trucks, post 1996 in US, post 2000 for EU-based and Asian cars.
• RETRIEVE VEHICLE INFO: The Autel MS309 automotive OBD2 scanner enables retrieval of the Vehicle Identification No. (VIN), Calibration ID(s), Calibration Verification Nos. (CVNs). This function is most useful to check whether the ECU matches your car when you are buying a used car. The MS309 auto car scanner comes with LIFETIME FREE software updates and is backed by 45 Day Money Back and 12 Months US Seller . Purchase now and go fix something!

User questions & answers

Question:	will this work on my 2000 Toyota Prado dieselwith 1KZ engine
Answer:	Hi there, I am with BAFX Products. Sadly it will not read any ABS/SRS?VSC or any other codes. The only codes it is able to read are those which cause your vehicles "check engine" light to illuminate. Any other lights require more specialized tools for reading. Best regards, BAFX Products
Question:	Will this work on a Nissan X trail T
Answer:	yes, I'm using Windows Phone 8 on Nokia 920 with OBDAutoDoctor application. You need to connect the PIC18F2480 via Bluetooth, before starting an OBD2 scan tool application. On Windows Phone 8 only a few OBD2 app are available. OBDAutoDoctor is free but get only some information from the car. I just found how to unlock the pro version...It's a in-app purchase...click "..." at the bottom of the app to upgrade. The Pro version is available for $7.99.
Question:	i used this tool and all is said was manufacturer control. no code number with it? what does that mean? 1998 ford explorer sport
Answer:	Hi Christopher - I am with BAFX Products Support.In MOST vehicles you will be ok leaving the adapter plugged in as long as the vehicle is driven every few days. However we make the following recommendations:1) Do not leave the adapter plugged in if it will not be driven for 24-48 hours2) If your area is to be experiencing extreme cold unplug the adapter as the combination of cold and the adapter will drain it faster3) If your battery is more than a 1-2 years old you will want to be very careful about leaving it plugged in, older batteries do not hold the same juice as the newer ones4) If you have an electronics heavy vehicle such as BMWs tend to be we do not recommend leaving it plugged in as the vehicles electronics do not always fully power down either5) If you have any other device plugged into the vehicle while it is off via cigarette ports or whatever we then also recommend removing the adapterI hope that these tips and information are found helpful. If you have any further questions you may always reach out to us through the Amazon messaging system at any time!Best regards,BAFX Products Support
Question:	Can you use this to diagnosis why check engine light is on and figure out why car wont start? even of car wont start
Answer:	I can confirm that this adapter WILL read (I haven't tried to clear yet) ABS codes on Ford (2001 Ranger 4.0L), using FordSysFree or MotorDataOBD Free (both Android). ABS codes are in the Cxxxx range. Mine picked up, correctly, C0034 - Front Right Wheel Speed Sensor Failure. While other adapters may be able to read these codes with other Android Apps, this ELM327 BAFX adapter does capture ABS codes for Ford. That is the only one I can confirm. Yes, FORScan for PC should also pick up these codes with this adapter. I have not tested Torque PRO, but I don't believe it will read ABS codes with this adapter.

Product features

MaxiScan MS309

Quickly scan and define vehicle Diagnostic Trouble Codes (DTCs) with this easy-to-use, compact code reader with the ability to view Freeze Frame Data, check I/M Readiness (Emissions) and monitor status. The MS309 is a go-to tool for quick vehicle health status.

View Freeze Frame

The Autel MS309 auto code reader is most useful while diagnosing continuous monitor faults like engine misfire and fuel control concerns.

When an emissions related fault occurs, the OBD II system not only sets a code but also records a snapshot of the vehicle operating parameters to help in identifying the problem. This set of values is referred to as Freeze Frame Data and may include important engine parameters such as engine RPM, vehicle speed, mass airflow, engine load, fuel pressure, fuel trim value, engine coolant temperature, ignition timing advance, or closed loop status.

Smog Check

MS309 engine scanner code reader comes with I/M readiness status check function that shows you whether all the emission related systems and components are operating within allowable limits to help you pass the annual Smog Check.

The engine scanner shows readiness status with series of readiness monitors: continuous monitors like misfire, fuel system and comprehensive components monitor and non-continuous monitors like EGR system, O2 sensors, Catalyst, Evaporative System, O2 Sensor Heater, Secondary air, Heated Catalyst and A/C system.

DTC Definitions

Autel MS309 supprots DTC definitions. The definitons will be displayed bellow the codes. It provides you an easier way to read and a quick understanding of what's the meaning of the fault codes that was detected.No need to search online for what's the codes meaning.

Retrieve Vehicle Information

MS309 automotive scanner retrieves the Vehicle Identification No. (VIN), Calibration ID(s), Calibration Verification Nos. (CVNs). This function is especially useful while you take this little pocket OBD2 code reader with you while buying a used car to check whether the VIN matches and make sure the ECU has not been replaced with a garbage car.

Turn Off Check Engine Light & Erase Codes

Autel MS309 scanner not only read and clear normal codes, but also retrieves generic (P0, P2, P3 and U0), manufacturer-specific (P1, P3 and U1), and pending codes

Vehicle Coverage

Autel MS309 car OBD2 scanner is Compatible with domestic, Asian and European vehicles, 1996 and newer. And the auto scanner supports all 5 OBDII protocols: KWP2000, ISO2000, ISO9141, J1850 VPW, J1850 PWM and CAN.

Product description

Have you ever experienced a car break down on the way?

Are you bothered by the frequent lights on your car?

Are you worried that it is too expensive to go to a 4s shop to have your car repaired?

If you Choose our OBD II Scanner, it can help you solv these troubles, you can automatically diagnose your car failure through our products. Compared to Bluetooth OBDII scanner, it's more stable and more convenient, you don't need to worry about signal loss.



Specification:

Display： Badit, 128 * 64 pixel display

Working voltage: DC 12V

Working current: 70mA

Working temperature: 0 ~ 65 ° C

Storage temperature: -20~ 70°C

Port Type: 16 pin OBD Male

Size: Length: 156mm, width: 88mm, height: 24mm



Supported vehicle data:

--Read code

--Delete the code

--Read Freeze Frame data

--Retrieve I / M ready state

--Read the vehicle information

--Diagnostic menu

--Vehicle ID Number

--Battery detection function(BAT)

--Diagnostic code query(DTC)

--The number of diagnostic functions supported by different vehicle makes and models may vary.



Features:

--Powerful diagnosis utility.

--With "DTC" button, you can check the fault code with a single click.

--With "BAT" button, One-click battery check function allows you to detect car battery voltage.

--Handheld OBD2 scanner for cars is charged directly by the OBDII car scanner interface in your vehicle, no extra battery required.

--large screen with white backlight and contrast adjustment allows for easy viewing of diagnostic test results and DTC.

--Support multiple languages.

--Applied to all the vehicles that accorded with OBD II standard since 1996.



Note:

--This product is incompatible with Hybrid Electric Vehicle(HEV), Electric Vehicles(EV) and vehicles not under the OBD2 protocol.

--Does not work on vehicles with 24V batteries, and not support some diesel vehicles.

• Powerful Diagnostic Tool: OBD2 code reader features built-in OBD2 DTC lookup library, help you to determine the cause of the engine light, read code, erase code, view freeze frame, I/M Readiness, vehicle information, Data Stream, DTC lookup, Battery detection function(BAT), real-time curve like Car Speed, Calculate Load Value, Engine Coolant Temp, Engine RPM. Convenient and practical, great for the car owners.
• Handheld Diagnostic Scanner: Display view area: 60.78(W) × 32.94(H) mm, with white backlight and contrast adjustment, from which you can read test results clearly. Besides, scanner for cars is charged directly by the OBDII car scanner interface in your vehicle, no extra battery required, compared to Bluetooth OBDII scanner, it's more stable and more convenient, you don't need to worry about signal loss.
• One-click Design: With "DTC" button, you can check the fault code with a single click; with "BAT" button, One-click battery check function allows you to detect car battery voltage. Support multiple languages: Deutsch, Dutch, English, Italiano, Español, Français, Chinese.
• Economical: Our OBD2 scanner plug and play, fast scan and clear trouble codes, very easy to use, even a beginner can use this unit to read the error code, with what displayed on screen. You can find out what the problem is and fix the easy ones yourself but don't worry about going to the 4S shop for too expensive repairs. This device will help to reduce maintenance costs and solve many automotive problems that might arise.
• Application: Our OBD2 scan tool is compatible with all 1996 and newer model cars, SUVs, and light trucks sold in the US, Europe, and Asia. Supports all OBD2 protocols: SAE J1850 PWM, SAE J1850 VPW, ISO 9141-2, ISO 14230-4 (KWP2000), and ISO 15765-4(CAN). Note: This car code reader is incompatible with new energy vehicles, hybrid vehicles.

User questions & answers

Question:	Is this OBD2 car code reader need an app downloaded for using it
Answer:	Don’t need to download app, just plug in the OBD interface to start diagnosis, you must have the ignition on though!
Question:	Will it reset check engine light codes
Answer:	Yes, it worked on my 2011 Ford, In my case I've been able to read the code, diagnose and fix the issue (bad exhaust O2 sensors) and then reset the code. Note: if the underlying issue isn't repaired the engine light/code will eventually throw again
Question:	Will this do a battery test on a bmw
Answer:	Yes it can do a battery test on a bmw
Question:	Will it diagnose abs system
Answer:	Sorry, it can not diagnose ABS system. this scanner is detecting the Engine System, read and clear the error codes.

Product description

Car diagnostic scanner

OS601 is a cost-effective upgraded version of OBDII scanner for determining the cause of the Check Engine Light. Equips with a 2.4-inch color screen and shows live vehicle sensors data in text and graph format. Support all the 10 OBDII test modes, enhanced Mode 6, read&erase codes, code definitions and playback data from the car ECU. It enables you to inspect monitor before Smog check, and switch off the MIL.

How to get started?

Simply plug into the OBD2 port on your car and turn ignition on and you ready to go.

No matter where you are, let this gadget accompanies with you. Let you decide if it's something you can fix or need more advanced help. Save money and time.

Where's the OBDII interface?

It is often under the dash, or under a panel below the handbrake in the center console.

What is OBD-II?

On-board diagnostics (OBD) is an automotive term referring to a vehicle's self-diagnostic and reporting capability. Vehicles produced after 1996 use OBD-II, which is a standardized system that simplifies the process a whole lot. These vehicles all use a common diagnostic connector and a set of universal trouble codes. Though only emission-related codes and data are required to be transmitted through it according to U.S. legislation, most manufacturers have made the OBD-II Data Link Connector the main connector in the vehicle through which all systems are diagnosed and reprogrammed.

At the most basic level, the check engine light indicates that some sensor, somewhere in your engine, exhaust, or transmission, has provided unexpected data to computer. That could indicate a problem with the system the sensor is responsible for monitoring, a bad sensor, or even a wiring issue.

Why I can't erase the fault code?

Once the monitors are reset, the MIL will either remain out because the DTC was corrected by the proper repair, or it will illuminate because it has again detected the problem.

• Universal Compatibility: Applicable to MOST US-based cars (made in 1996 or later), EU-based cars (made in 2001 or later), Asian cars (made in 2008 or later), and all OBD II/EOBD/CAN-compliant vehicles.
• Smog Check: Clearly shows whether the emission-related systems are operating properly or ready for inspection and maintenance testing; turns off check engine light and resets monitors; views freeze frame data, read live PCM data stream, EVAP system test data, On-Board Monitor test data and display live O2 sensor test data.
• Shows the code and what the code means directly. Able to retrieve generic (PO P2 P3 and UO) manufacturer specific (P1, P3, and U1) codes and pending codes, and vehicle information (VIN, CID and CVN). And can store the data you have viewed (DTCs, freeze Frame, live data, etc).
• Supports all OBDII protocols, including ISO9141, KWP2000, J1850 PWM, J1850 VPW and CAN (Controller Area Network).
• No battery needed, just plug it into the OBDII port and start diagnosis. Features a 2.5-foot flexible plug and a 7-button panel. Supports DTC look-up, and software upgrade. Supports multi-language display (English, German, Spanish, Dutch, Russian).

User questions & answers

Question:	Funciona para un Aveo
Answer:	No se
Question:	Why I can't erase the fault code
Answer:	Thank you for your question. At the most basic level, the check engine light indicates that some sensor, somewhere in your engine, exhaust, or transmission, has provided unexpected data to computer. That could indicate a problem with the system the sensor is responsible for monitoring, a bad sensor, or even a wiring issue. A fault code which provide a jumping off point in the diagnostic process. Then probably the vehicle still has a an issue. Codes only erase if the problem is repaired.
Question:	How can update os601? when do i need to upgrade it
Answer:	Contact the seller for an upgrade package. The upgrade is free. Anytime
Question:	How do you upgrade the software once it is out of date
Answer:	Thank you for your question. In most cases, the upgrade is to fix bugs in the software. In general, a six-month upgrade is sufficient (Because the support for the OBD-II protocol is stable). For other situations of upgrade or diagnosis, you can collect the corresponding model information and send it to us to provide more services. 【How to upgrade?】Connect scan tool with PC through Mini B connector(5 pin) at the bottom of the machine, migrate the upgrade data into it. For more detailed information, please email us via the station and we will send you the upgrade file. May you have a nice day! Warm Regards, Juta Auto

Product description

Retrieve generic and manufacturer specific diagnostic trouble codes(DTC), clear codes and turn off check engine light. Follow the correct order to use the OBD2 scanner: Engine off- Plug it in- Turn ignition on.

• TURN OFF CHECK ENGINE LIGHT: MS300 check engine code reader can read, clear generic, manufacturer-specific and pending codes. It enables you to figure out why CEL is on like a pro and turn off check engine light instantly after proper repair.
• MECHANIC APPROVED: MS300 OBD2 scanner works with most OBDII compliant(OBD2 protocols: KWP2000, ISO2000, ISO9141, J1850 VPW, J1850 PWM, and CAN) sedans, SUVs and light trucks post-1996 for US cars, post-2000 for EU-based and Asian cars.
• DIAGNOSE IN SECONDS: MS300 auto code reader features easy to use 2 button design to read, clear DTCs to help home mechanics locate car problems fast. With an intuitive interface and easy-to-read backlit screen, this diagnostic code reader is easy to use.
• SMOG CHECK: MS300 car code reader retrieves I/M Readiness status to check emission-related systems like misfire monitor, fuel system monitor, comprehensive components monitor, O2 sensors, EVAP to help your vehicle ready pass the annual smog check.
• NO BATTERY NEEDED: MS300 OBDII scan tool communicates with vehicles through standard 16-PIN OBD2 cable and it’s powered by vehicle directly- no battery needed. Please follow the correct usage order: Engine off- Plug MS300 in- Turn Ignition On.
• RETRIEVE VIN NUMBER: MS300 engine code readers can retrieve VIN (Vehicle Identification Number) on 2002 and newer vehicles supporting Mode 9 for quick vehicle identification and cut time spent locating the cause why the check engine light is on.
• Retrieves generic and manufacturer specific Diagnostic Trouble Codes (DTC), includes definitions lookup software on CD and displays DTC definitions on screen

Product features

Autel MaxiScan MS300 OBD2 Scanner Code Reader Turn Off Check Engine Light Smog Check

AUTEL STORY

Autel is one of the major manufacturers of professional diagnostic tools, equipment and accessories in the automotive aftermarket. Autel, with automotive experts of years of experiences in the industry, has been committed to creating maximum value to customer worldwide by providing quality-assured, user-friendly, cost-effective and innovative products since its foundation more than 15 years ago.

Autel MaxiScan MS300

The MaxiScan MS300 code reader supports all OBDII protocols, including KWP2000, ISO2000, ISO9141, J1850 VPW, J1850 PWM and CAN. Though small in size, the MS300 is able to retrieve the same emission related information as large expensive scanners. MS300 works with most post 1996 vehicles that are OBDII compliant (including CAN).

• For End User & DIYERS: This error code reader is ‘plug and play’ and comes with an easy interface. Even if you’re not familiar with vehicle repair, you can quickly take control of this code reader, and get the information you want
• Turn Off CEL: This car diagnostic tool supports reading DTCs, displaying Live Data, Freeze Frame & I/M Readiness etc to figure out the root cause of the Check Engine Light (CEL) and turning it off to help you detect any potential problems
• Patent Guarantee: AL319 Code Reader features a patented One-Click I/M Readiness Key for quick State Emissions readiness check and drive cycle verification. No batteries are needed as it will get the power directly from the OBDII Data Link Connector in your vehicle
• User-Friendly Design: This check engine code reader equipped with TFT color display which shows DTC definitions more clearly, built-in speaker provide audible indication, LED Indicator etc. 2. 5 feet long cable is long enough without getting in the way
• Extensive Application: Compatible with 7 languages and various post-1996 OBD II protocol vehicles, this OBD2 scanner provides accurate and fast diagnosis for worldwide car owners. 12 months warranty from the date of purchase and lifetime free update are offered by this Automobile OBDII scan tool

User questions & answers

Question:	Wiil it track security light flashing
Answer:	Dear customer, no batteries are needed, just plug and play.
Question:	What is the difference between this autolink and the maxiscan? does anyone know (besides price
Answer:	Because you only need to spend a little money to buy this OBD2 Scanner, you can save a lot of maintenance costs
Question:	Will this scanner indicate drive cycle readiness
Answer:	It has a live data stream option that is very detailed so it may. I know I was monitoring individual sensor voltages on my o2's and figured out which if the 4 needed to be replaced.
Question:	Do this reader tell you only code and you have look to on line for explanation of code or tell you what is problem >thank you
Answer:	Dear Customer, All OBD II Protocol Cars Since 1996.

• Bluetooth OBD2 adapter with support for extensive third-party apps (such as OBD Fusion, Torque Pro, Car Scanner ELM OBD2) can turn your iPhone, iPad or Android phone/tablet into a sophisticated car scan tool.
• Read diagnostic trouble codes and freeze frame data, reset check engine light, prepare smog test, view real-time sensor readings, create customized dashboard and estimate fuel economy.
• Works with OBD2 / EOBD compliant cars and light trucks (year 1996 or newer in the US, including pickup trucks, hybrid and many electric vehicles; may require special apps).
• Compatible with iOS (no Bluetooth pairing needed; connect in the app) & Android devices (head units not recommended). Easy to plug in and unplug. No complex settings or tricky connections plus much lower power consumption compared to WiFi, and it does not block internet access for other apps.
• A third-party App is required (check recommendations in the description below, some may require separate purchase). Comes with one-year replacement warranty.

Product features

Check why the Check Engine Light is on

The OBDCheck BLE helps you read the error codes causing the check engine light to come on. You may then find out what the possible causes are and fix simple problems by yourself and reset the light, potentially saving you a trip to a garage and hundreds of dollars. When you need to bring your car to a mechanic, it also gives you a peace of mind.

Powerful scan tool and more

With the proper app, you can do more:

· View real-time sensor readings,

· Monitor fuel economy,

· Create your own dashboard,

· Know whether your vehicle is ready for smog check,

· On specific vehicles, you can even have advanced features like enhanced PIDs, diagnostics and coding (requires capable App),

· And more to discover!

Universal Vehicle Compatibility

Works with 1996 and newer cars, SUVs, MPVs, mini vans and light trucks sold in the United States. Vehicles in other regions may also be supported:

Australia – 2006 (gas), 2007 (diesel)

Brazil – 2007 (gas)

Canada – 1998

European Union – 2001 (gas), 2004 (diesel)

Mexico – 2006, etc.

Specifications

Communication Method: Bluetooth LE for iOS, Classic Bluetooth for Android & Windows

Supported Devices: iOS with Bluetooth 4.0 or above, Android phone & tablet (Android car radios/head units may not be compatible), Windows, Mac

Operating Voltage: 9V~16V

Operating Current: Max 45mA

Operating Temperature: -40~185°F (-40~85°C)

Dimension: 1.61" x 1.97" x 0.87"

Package Includes:

1 x Veepeak OBDCheck BLE OBD2 Scanner

1 x Storage Pouch

1 x User Manual

• WIDE COMPATIBILITY - Recommended by YouTube Star Scotty Kilmer on his channel. Works on most vehicles sold in the USA with model year of 1996 or newer; Supports all OBDII protocols: KWP2000, ISO9141, J1850 VPW, J1850 PWM, and CAN (Controller Area Network); Displays in English, German, French, Spanish, Finnish, Dutch, Russian, and Portuguese; Requires no battery or charger as the unit gets power directly from the OBDII Data Link Connector in the vehicle.
• CRITICAL FUNCTIONALITY - Reads quickly and erases stored emission-related codes, pending codes, and shows code definitions. Turns off the MIL (check engine light), helps in resetting the monitor before taking it to Smog, and tells you what is going on before bringing the car in for repair.
• ENHANCED OBDII DIAGNOSTICS - Supports O2 Sensor and EVAP (Evaporative Control) System Test. AD410 code scanner can be used to initiate a leak test on a vehicle's EVAP system by monitoring the integrity of the fuel tank system. The O2 Sensor Test is designed to monitor and adjust air/fuel mixture, which will help identify and troubleshoot issues related to fuel efficiency and vehicle emission.
• QVGA DISPLAY & NEW UI - AD410 code reader is a greatly enhanced upgrade from more basic diagnostic scan tools. It has a 2. 4" TFT true color (262K) LCD display for clear test results showing. With an easy-to-read UI design, the user can easily access Setup, OBDII Diagnostics, I/M readiness, and DTC Look-up and Review. You don't need to read the manual to know what to do, even for a beginner.
• DIAGNOSTIC REPORTS & UPDATE - The "Review & Print" option can be used to save or print diagnostic reports as needed. ANCEL brand provides life-time free software updates for this unit to fix the latest bugs or add new parameters. Just download the software from the ANCEL website and then follow on-screen instructions to install.

Product features

ANCEL AD410 OBDII Scanner

Where's the OBDII interface?

• The OBD2 port is often under the dash, or under a panel below the handbrake in the centre console.

How to get started?

• Simply plug into the OBD II port on your car and turn the ignition on and you ready to go.

Why I can't erase the fault code?

• The fault causing the fault code to show will need to be repaired first then code can be erased.

NOTE:

• Works on vehicle with 12V battery ONLY
• Must be 16 PIN OBD II protocol

KEY FEATURES

• Reads and clears check engine light codes, both generic and manufacturer-specific, and resets monitor
• Built-in DTC look-up library for manual retrieval and code definition
• I/M Readiness to test misfire, fuel system and Comprehensive component
• Displays all data stream items or selects any item of live data for graphing
• Views freeze frame data and shows vehicle parameters recorded by ECU when an emission-related fault occurs

CODE DEFINITION

There is a built-in up-to-date OBD-II DTC look-up library in this device. Fault codes and their definitions can be found in the library. A 2.4" TFT true color (262K) LCD display is fitted to provide a clear reading of the information contained in it. After a fault code is detected, the definition of the code will be shown by directly clicking the fault code selected.

DATA STREAM

The scan tool lets you view "real-time" Live Data. This information includes values (volts, rpm, temperature, speed etc.) and system status information (open loop, closed loop, fuel system status, etc.) generated by the various vehicle sensors, switches and actuators. It supports detailed text display, and you can view all data stream items or select a certain item of live data with a graph.

I/M READINESS

I/M readiness is to test Misfire / Fuel system / Comprehensive component. Quickly monitor emissions readiness check and drive cycle verification. Let you know the comprehensive status of your car's engine system. Help you pass the Smog Check easily."N/A" means Not Available on this vehicle, "INC" means Incomplete or not ready, "OK" means Completed or Monitor Ok.

POWERFUL CPU

Unlike other Cheap and Old versions, ANCEL AD410 scanner goes with a more advanced STM 32-bit CPU has the specialty of high speed, compressed volume and steady performance.

LIFETIME FREE ONLINE UPGRADE

AD410 provides life-time free software update to fix the latest bugs and add newly DTC or parameters. Just download the software from ANCEL website, then follow instructions to update.

Please Note: After the unit is plugged into a computer via a USB cable, the LCD screen will display two vertical bars until the update is complete. The update software supports Windows 7/8/10.

FEEDBACK

Have problems working on your vehicle? Don't worry, just turn the "FEEDBACK" option on in the Settings and then send us the recorded issue file via PC, and our support team will contact you as quickly as we can.

SAVE MONEY AND TIME

Simple and super easy to use, this device is a must-have diagnostic tool for today’s technologically loaded vehicles. It is a car doctor, so to speak, that allows you to identify and troubleshoot any problem with your car engine, so you may try to fix it by yourself or know how much it costs you to have it fixed when a mechanic is involved. That’s time and money saved.

• ▲IMPROVED VERSION OBD2 SCANNER CAR DIAGNOSTIC TOOL - Pass EMC Certification, ROHS Certification and FCC Certification. Read & Clear diagnostic trouble codes for the check engine light, both generic & manufacturer specific codes, reset Check Engine light.
• ▲SUPPORT iOS & ANDROID - Recommend "OBD Fusion(9. 99USD)" and "inCarDoc(0~9. 99USD)" for iOS. Recommend (in-app purchase) "Torque Pro" for Android. Third-party apps may need to pay to get full function. Please wait wifi connection done in 10 seconds.
• ▲COMPATIBLE VEHICLES - Works with model year 1996 and newer vehicles sold in Unite States (except for cars with 24V voltage). Include VW Ford GM Dodge BMW Chevrolet Audi Subaru TOYOTA Honda Mazda Kia Benz and more OBDII vehicles.
• ▲DISPLAY REAL-TIME SENSOR DATA - Display data including Engine RPM, Calculated Load Value, Coolant Temperature, Fuel System Status, Vehicle Speed, Short Term Fuel Trim, Long Term Fuel Trim, Intake Manifold Pressure, Timing lights, Timing advance, Intake Air Temperature, Air Flow Rate, Absolute Throttle Position, Oxygen sensor voltages/associated short term fuel trims, and so on.
• ▲18-MONTH - 100% money back for quality problems. Any question with our WIFI OBD2 scanner, please contact us freely!

User questions & answers

Question:	Will this work on a 2003 7.3l f
Answer:	Yes, most cars have OBD2 "on board diagnostics 2", it is a standard.
Question:	Do you have to pay for an app upgrade to be able to clear codes
Answer:	No, our recommend free app in listing page will clear codes. The paid version needed if you want to get more real-time sensor data or more information of your engine.
Question:	Would you please tell me about the firmware version of this OBD tool? thanks in advance
Answer:	Dear Customer, this OBD2 scanner wifi uses ELM 327 firmware
Question:	Will this work with dash command on iOS
Answer:	Yes our obd2 scanner will work with dashcommand on iOS.

Product features

Support Protocols:

SAE J1850 PWM(41.6Kbaud)

SAE J1850 VPW(10.4Kbaud)

ISO9141-2(5 baud init,10.4Kbaud)

ISO14230-4 KWP(5 baud init,10.4 Kbaud)

ISO14230-4 KWP(fast init,10.4 Kbaud)

ISO15765-4 CAN(11bit ID,500 Kbaud)

ISO15765-4 CAN(29bit ID,500 Kbaud)

ISO15765-4 CAN(11bit ID,250 Kbaud)

ISO15765-4 CAN(29bit ID,250 Kbaud)

SAE J1939 CAN(29bit ID,250*Kbaud

A Must Have Scan Tool for Your Vehicle, Compatible with iOS and Android

Access Whole New World of Information about Your Vehicle

Practical Scan Tool You Deserved

• Provide you with the trouble code causing the Check Engine Light to turn on.
• Display real-time sensor data on your phone or tablet with the third-party App.
• Compatible with iOS and Android.

• FEATURES: Read or clear generic and manufacturer error codes, retrieve VIN (vehicle identification numbers) on 2002 or newer vehicles supporting mode 9, and reset the airbag light
• INCREDIBLY SIMPLE: Plug it into the 16-pin connector underneath the steering wheel, turn the ignition, and you're ready to go using only 2 simple buttons
• COMPATIBILITY: Works with most US vehicles 1996 and newer that are OBDII and CAN compliant and supports all OBDII protocols as these are required in all US vehicles after this date
• LCD SCREEN: Displays the meaning of over 3000 generic error code definitions in the database, it also clears trouble codes (DTC’s) and turns off the check engine light (MIL)
• HANDHELD: At 2.75" x 1" x 4.25" (26.25 inch cable) and only 8 ounces, it literally fits in the palm of your hand, plus it's powered by your vehicles, Data Link Connector so you don't even need batteries

User questions & answers

Question:	Will this fit on ford f150 2008 xlt
Answer:	Yes it should. Typically anything after 96 has an obd
Question:	Wich is better ms300 or ms309. what is a differance? thx
Answer:	The main difference I see is the ms309 can pull freeze frame data which is very helpful in determining what might have caused the DTC to get triggered. For that reason, I'd definitely choose ms309 over ms300. I assume this is just a rebranded Autel (the black ones).
Question:	Does it count misfires for each cylinder? (No code, but is occasionally skipping - I need to know which cylinder
Answer:	Unfortunately, the scanner does not count misfires for each cylinder.
Question:	is there any scanner that will check ABS
Answer:	Unfortunately, this scanner can not check for ABS.

Product features

SIMPLE SCAN

ONCE PLUGGED INTO YOUR VEHICLE’S 16 PIN OBDII DLC, THE UNIT WILL TURN ON AND PROMPT YOU TO START YOUR IGNITION. THIS DEVICE WILL BOTH READ & CLEAR GENERIC AND MANUFACTURER CODES. PLUS, IT’S POWERED BY THE OBDII DATA LINK CONNECTOR IN YOUR VEHICLE, SO THERE IS NO NEED FOR BATTERIES OR A CHARGER.

IN ADDITION

NOT ONLY DOES THE OBD II SCAN TOOL MS309 READ & CLEAR CODES, IT ALSO RETRIEVES THE VIN (VEHICLE IDENTIFICATION NUMBER) ON 2002 AND NEWER VEHICLES THAT SUPPORT MODE 9.

COMPATIBILITY

WORKS WITH MOST 1996 & NEWER US-BASED VEHICLES THAT ARE OBDII COMPLIANT (INCLUDING CAN) AND SUPPORTS ALL OBDII PROTOCOLS.

DISPLAYS OVER 3000 GENERIC ERROR CODES, CLEARS TROUBLE CODES (DTC’S), AND TURNS OFF THE CHECK ENGINE LIGHT (MIL).