13 best topeak bicycle repair kits

Product description

An award winning 21 functions multi-tool with updated design to store T15, T25, 8mm hex tool bits and side mounted tire levers securely. Includes self-tightening tool (T25 Torx bit) and Presta Core Tool to tighten or remove two-piece Presta valve cores. The Hexus X is an excellent choice for both road and mountain bike riders. The chain tool is compatible with single and multi-speed chains up to 12 speed, NOT including Campagnolo 11 speed hollow pin chains.

• An award winning 21 functions multi-tool with updated design to store T15, T25, 8mm hex tool bits and side mounted tire levers securely
• Includes self-tightening tool (T25 Torx bit) and Presta Core Tool to tighten or remove two-piece Presta valve cores
• The Hexus X is an excellent choice for both road and mountain bike riders
• COMPATIBILITY - The chain tool is compatible with single and multi-speed chains up to 12 speed, NOT including Campagnolo 11 speed hollow pin chains
• FUNCTIONS - 21
• TOOLS - Allen wrenches - 2 / 2.5 / 3 / 4 (2 pcs) / 5 / 6 mm tool bit - 8 mm hex Torx bits - T15 / T25 Torx wrench - T30 #2 Phillips screw driver, 14G / 15G spoke wrenches, steel wire chain hook, 2 engineering grade polymer tire levers, Presta Core Tool and CrMo steel chain tool
• TOOL MATERIAL - Chrome vanadium steel

User questions & answers

Question:	Does this seriously not have a flat head screwdriver
Answer:	Two inches from nozzle to nozzle.
Question:	Do you use a tire lever to drive the chain tool? I'm concerned it would break, does it the plastic feel sturdy enough for that torque
Answer:	Both the head and the hose as well.
Question:	Where is the presta valve core removal tool
Answer:	It should work. The head comes with a wide variety of adapters and can be used with almost any pump.

Product features

HEXUS X

An award winning 21 functions multi-tool with updated design to store T15, T25, 8mm hex tool bits and side mounted tire levers securely. Includes self-tightening tool (T25 Torx bit) and Presta Core Tool to tighten or remove two-piece Presta valve cores. The Hexus X is an excellent choice for both road and mountain bike riders. * The chain tool is compatible with single and multi-speed chains up to 12 speed, NOT including Campagnolo 11 speed hollow pin chains.

Compartments

Compartments for T15, T25 and 8mm hex tool bits

Presta Core Tool

Built-in Presta Core Tool to tighten or remove two-piece Presta valve cores

Tire Levers

Sides of Hexus body remove for use as tire levers

Tools

Allen wrenches - 2 / 2.5 / 3 / 4 (2 pcs) / 5 / 6 mm tool bit - 8 mm hex Torx bits - T15 / T25 Torx wrench - T30 #2 Phillips screw driver, 14G / 15G spoke wrenches, steel wire chain hook, 2 engineering grade polymer tire levers, Presta Core Tool and CrMo steel chain tool

FUNCTIONS 21

Product description

Upgrade any pump to the TwinHead pump head. Includes extra long hose and mounting hardware. Fits Presta / Schrader / Dunlop valves.

• Dual head adjusts to presta/Schrader
• Weighs 160-Grams

User questions & answers

Question:	I have a hurricane pump purchased at performance bike. the valve head leaks. can i upgrade upgrade using topeak twinhead bicycle floor pump upgrade
Answer:	All bikes being equal I believe that this tool will work on all bikes. I have an older Trek bike and it works perfectly.
Question:	how wide is the pump head - just the head part. need to use in a tight area
Answer:	Yes there is some resistance to keep the allen wrenches in place. The knife, screw driver and box wrenches lock in place when fully extended. I highly recommend this excellent tool.
Question:	Is this just the head or the hose as well
Answer:	No, it doesn't bend under normal use.
Question:	Does this head work with the Joe Blow Pro (which came with The Smarthead
Answer:	just look at the Topeak website, it has all the detailed specs you will need, and it's very easy to find:Tools26 total Allen Wrenches2-L/2.5/3/4/5/6/8/10mm Torx® WrenchT25 Box Wrenches8/9/10mm 2 each Spoke Wrenches15g/14g Chain ToolCast Cromoly Steel Chain HookStainless Steel Wire Tire LeversTwo Integrated In Body Screw Drivers#2 Phillips & Flat Head KnifeStainless Steel Bottle OpenerHardened Steel CompartmentsFor Two Chain Pins Pedal WrenchMini (For Field Repairs) Tool MaterialHardened Steel BodyEngineering Grade Plastic Bag MaterialHD Nylon Size (L x W x H)8.6 x 4.3 x 4.1 cm 3.4" x 1.7" x 1.6" Weight290 g / 10.21 oz Art.no.TT2353

Product description

At Topeak, exciting new ideas for accessories are spinning at full speed and driving us ahead in a never ending cycle of innovation. From the dreams of our designers and engineers great cycling accessories are born - spun out from the ever turning gears of their collective imagination. From our humble beginning in 1991 our passion for cycling has evolved into the making of the worlds finest cycling accessories. In almost every category, our products set the standard of innovation, performance and durability. Products like our JoeBlow series floor pumps, Alien tools and RaceRocket mini pumps to our patented technologies like SmartHead, TwinHead, PressureRite, QuickTrack and QuickClick systems to the full service PrepStation and PanoBike App Topeak delivers the convenience and enjoyment your cycling customers deserve. Products

• Used by both professional and amateur riders alike
• Made using high quality materials and components
• Tested to ensure quality and durability
• 9 Tools Total
• Elegant One Piece Super Light Folding Tool
• Weight: 92 g / 0.20 lb
• Material: Hardened Steel (Tools),Extruded Aluminum (Body)
• Includes Neoprene Bag

User questions & answers

Question:	Does this unit have a spoke key
Answer:	This item (ASIN: B073HYXJPY) you mentioned does not come with the spoke wrench, please choose another type of bike repair kit (visit this product link: https://www.amazon.com/dp/B078X9SQZF ) which you can find the spoke wrench in it. For more questions, please contact us at [email protected] or via Amazon message
Question:	Does this tool have a common/flat blade screw driver, picture does not seem to show one, seems like you should have one
Answer:	The pump is made to fully extend to 12' and fully closed it is 7'.
Question:	I have a Trek Verve 3 and need a tool to handle all adjustments (not intended for chain, spokes, tires). Will this tool suit my needs? Thanks
Answer:	No, this bike repair kit does not come with the chain tool. For more questions, please contact us at [email protected] Thank you
Question:	Is there a 2.5/3mm hex wrench
Answer:	I believe UPS does allow that.

Product features

MINI 9

Big things from a small package. The Mini 9 is durable, super lightweight and comes with its own neoprene bag.

Bag

Includes neoprene bag

Ultra Light, Compact

Ultra light and compact for the minimalist roadie

Material, Tool Types

Extruded aluminum (Body)

Chrome vanadium steel (Tool)

TORX WRENCH T25

SCREW DRIVER #2 Phillips

ALLEN WRENCHES 2 / 2.5 / 3 / 4 /5 / 6 / 8 mm

FUNCTIONS 9

• Item name: Topeak SHUTTLE LEVER 1.2 TTL002 Engineering Grade Plastic Yellow& Black Pair
• Model: TTL002
• Color: Yellow& Black

Product features

SHUTTLE LEVER 1.2

Made from high strength matrix polymer and engineering grade reinforced plastic. Rigid, strong and durable.

TIRE LEVERS Engineering grade polymer

SIZE 15 x 2.6 x 1.65 cm / 5.9” x 1.0” x 0.6”

WEIGHT 45 g / 1.58 oz

Product description

The Topeak Alien II multi-tool is pretty incredible. It's an entire tool box that fits comfortably into your hydration pack or jersey pocket. There are 26 tools in all, and short of a cracked frame or complete fork overhaul, you should be able to fix just about anything with the Alien II. The Topeak Alien II combines pressed stainless steel with engineering-grade plastic for lightweight durability. It also splits apart for ease of use. The Alien II comes with a chain tool and a chain hook to assist with chain repairs. It also comes with a 15mm pedal wrench and two tire levers. As for Allen bits, this Alien has them covered from 2 to 10mm, with a T25 Torx also included. 8, 9, and 10mm box-end wrenches, along with 14, and 15-gauge spoke wrenches, and #2 Phillips/flat-head screwdrivers, round out the Alien II's features.

• Used by both professional and amateur riders alike
• Made using high quality materials and components
• Tested to ensure quality and durability
• 31 Tools Total
• 2 Piece Body
• 270g / 0.60 lb
• Hardened Steel (Tools), Engineering Grade Plastic (Body)
• Includes HD Nylon Bag With Clip

User questions & answers

Question:	does this work on schwinn bikes
Answer:	The strap is 2.5" wide.
Question:	Do the tools have some resistance when opening them? As in do the other tools stay put when using
Answer:	No, it does not. I bought a Martin headstock tie strap that works perfectly with strap.
Question:	Does the plastic body bend when tightening larger nuts/bolts
Answer:	Hello - the entire strap is genuine suede leather
Question:	Can you guys include all the sizes and specs? That's the only thing holding I'm sure millions of bike users from purchasing any product
Answer:	No, that's not accurate. There's two parts to this strap. The wide part, that is about 34" from tip to tip, and then there is the narrow strap part that you can adjust the overall length of the strap. If you make it as short as possible it looks to be about 41" from hole to hole. If you want to use this strap at 33" you would need to use only the wide part. Take off the second narrow strap extension (which is easy to do). But you would have to punch a hole into one end of the wide strap and make it 33" between the holes. It is a great strap that doesn't slip at all on your shoulders.

Product features

ALIEN II

The award winning, do-it-all tool. 31 function tool folds into a lightweight two piece body - the perfect cycling tool. Includes self-tightening tool and a nylon bag. ＊The chain tool is compatible with single and multi-speed chains up to 12 speed, NOT including Campagnolo 11 speed hollow pin chains.

• ☆ HIGH STRENGTH 10-IN-1 TOOL. Bike repair tool kits is made of high-quality carbon steel with harder steel version. Fine and professional workmanship, fashion design, durable, stronger and more effective，include Universal Hex Wrench (Allen keys)-2, 2.5, 3, 4, 5, 6, 8mm/ Flat Head Screwdriver/Philips Screwdriver&Bicycle chain separator(Additional chain hook and 5mm spare wrench).
• ☆ 3-IN-1 IMPROVED TIRE LEVER VERSION. Tire levers + sticky patches + Frustration three-in-one function, Our fish-type crowbars are bigger, more sturdy and not easy to break, The frustration can be dismounted and installed on the crowbar more convenient. It can accommodate multiple tire patches, can be disassembled and stored when not in use.
• ☆ SMALL HAND PUSH PUMP. The tire pressure can reach 210 PSI, accurate to 2.5,comes with a compact pump with both Schrader and Presta valve attachment , a ball adaptor and 2 air nozzles for swim rings balls and other inflatables. detail (The valve can be switched by unscrewing at the hose (S) & (P) mark).
• ☆ EASY-TO-ATTACH PATCHES. can repair the punctured tyre without any extra glue: just apply the rasp to burnish the tyre and then paste the patch firmly onto the punctured area (only for emergency use). Multi-function bone wrench 10 kinds of uses (6-15). All accessories can be placed in a Portable tool bag for easy carrying.
• ☆ QUALITY GUARANTEE,6 MONTH WARRANTY. If for any reason you are not completely satisfied with the purchase you have made, do not hesitate to email us, We will prepare you as soon as possible to solve any problems for you until you are satisfied. Or you only have to return the product for a full refund.

User questions & answers

Question:	Is this good for bmx bikes
Answer:	What I would buy to remedy SG neck dive is a Strat or a Tele or a 335, but that being said, I have some acoustics that are a little neck heavy that these straps work well on. The webbing on the back, while it is textured, is shiny and slick and might not grip well enough to hold a notorious neck diver like an SG. I'd try something made of non-synthetic fabric like cotton, but I don't know what's out there. Maybe a leather strap with an unfinished suedey back side? There's always Velcro.
Question:	Does the ybeki bike tyre repair took kit attach to the back of the seat? if not, where do you attach it
Answer:	Hello, This is actually not a question of Color Scheme, but instead confusion caused to improper labeling. The "Standard Black" is a standard length Strap, the MSSC8-BLK, but the "Black" strap is actually an Extra Long Strap, the MSSC8-XL-BLK. Essentially the same strap, just different lengths. If you have any other questions, please feel free to reach out to us at [email protected]. Thanks!
Question:	Does the bag fit under the seat or on the rails
Answer:	38” is at the shorter pin hole. It wouldn’t go to 36” without some modifications. I will say that this is a really nice strap tho. If you have the means to make it work for you, I recommend it.
Question:	Is the seat bag included
Answer:	This is a rather large strap measuring, 2.5" wide and is adjustable from 38"-53" long. It is made for guitar and bass, so it would be a larger than what you'd need for a uke. Levy's does make some very nice straps for ukuleles, you can find them here, https://www.amazon.com/s/ref=nb_sb_noss_2?url=search-alias%3Dmi&field-keywords=levy%27s+ukulele&rh=n%3A11091801%2Ck%3Alevy%27s+ukulele Thanks for your interest! y2PLAY Stores 1-800-695-4808

Product features

Portable mini pump

This is a complete and versatile mini pump. Equipped with a mini pump with Schrader and Presta valve attachments, a ball adapter and two air nozzles for swimming ring balls and other inflation devices, so it can be used not only for bicycle tire inflation, but also for household inflation products. We also equipped this mini pump with mounting brackets and screws, so it can be installed in the position of the bicycle bottle cage or other easy-to-install positions, making it easier to carry.

Multi tool & accessories

The multifunctional folding tool has 10 functions. We also equip this tool with a chain hook, which can provide a good help when you disassemble the chain. There is also an auxiliary hex wrench for the chain tool and a spare thimble.

3 in 1 Tire Lever & Bone Wrench

The 3-in-1 tire lever has three purposes. The crowbar can be used to remove the tire and the file needed to polish the punctured tire. and the remaining patches can be stored between the two tire levers when not in use, so that the patches can be better stored. The multi-purpose bone wrench has 10 functions (6-15), and the small and exquisite design makes it easy to carry and is the best helper when traveling.

Large capacity saddle bag

The large-capacity saddle bag can put all products in it and has extra space. Although it can hold a lot of things, we recommend not to store heavy objects, because during riding, the overloaded weight will greatly reduce the service life of the saddle bag. After binding the saddle bag to the bicycle, check whether the binding is tight, because too loose will cause the saddle bag fixing strap to be damaged as the bicycle jumps during driving.

Product description

Traditional triple nylon/Velcro strap mount with snap-buckles . Made from 1200 denier Cordura with PTFE coating. 3M reflective strip and rear light attachment location.

• Pack is convenient gear-toting solution that clips instantly to the back of your bike's saddle and seat post
• Constructed of rugged 1,200-denier Cordura material with DuPont coating for weather resistance
• Pack attaches with Velcro strap mount and snap-on buckles
• Large main opening offers room for essential road gear; 3M reflective strip and rear light attachment offer safety-minded touches
• 130-gram (0.29-pound) weight; 60-to-80-cubic-inch capacity; measures 4.1-by-4.7-by-7.9 inches (W x H x D)

User questions & answers

Question:	I have a SelleRoyal Manhattan comfort seat with two rear springs. Behind these are two brackets with .5 in slots. Does anyone have a similar mount
Answer:	With the size of the seat you have, there are other choices. This bag is good, and you will be able to mount it, but it is a very slim profile. this is why I bought it for a tiny racing seat. The straps are adjustable velcro, and easily adaptable to any seat. But if you have a choice go larger.
Question:	What are the dimensions of the pack? I'm trying to compare it to the medium
Answer:	The large is 120 cubic inches expanded vs 80 ci expanded for the medium.
Question:	what mini pump will fit in it
Answer:	I use a Topeak RaceRocket hand pump and it fits in there perfectly (by unzipping the extension part): http://www.amazon.com/Topeak-RaceRocket-Mini-Pump-Black/dp/B00320OJAW/ref=sr_1_2?ie=UTF8&qid=1411675919&sr=8-2&keywords=topeak+hand+pump**Note** If your pump doesn't fit inside of it, there are elastic bands on the bottom of the bag that can easily hold any small hand pump.Along with the pump, I have:Emergency Tools1 spare tube (can fit 2 if necessary)1 Rema TipTop patch kit (the full box, didn't even bother taking out the contents)2 tire levers2 surgical glovesZip tiesI can keep my phone/keys in there if i want as wellthere really is a lot of room to spare, buy this bag, it's pretty great!
Question:	Will this fit an iphone 6 plus, a wallet and a set of keys
Answer:	yes, will fit in the small bag.

Product features

Expands

Medium & large expand to add 20-30% more volume

Light Clip

Features a light clip for extra safety

Large Opening

Large openings swallow up all of your gear

Reflective Strip

3M reflective strip adds safety at night

Product description

Upgrade any existing pump to the SmartHead pump head. Includes extra long hose and mounting hardware.

Upgrade any existing bicycle pump by adding this SmartHead kit, which replaces your old or worn-out pump hose and head. SmartHead technology ensures that the adapter will work on both Presta and Schrader valves without requiring you to change any parts or buy two separate adapters. Plus, it's easy to install, with an aluminum thumb-lock lever that creates an airtight seal over the valve. The SmartHead measures 41.7 by 1.1 by 1.9 inches and 0.3 pounds.

• HEAD - SmartHead Fits Presta / Schrader valves
• WEIGHT - 140 g / 4.93 oz
• SIZE - 106.5 x 5 x 2.9 cm / 41.7” x 1.9” x 1.1”
• Upgrade your bike floor pump

User questions & answers

Question:	What is the thread size? I have to replace a hose that has a 5/16 inch thread size
Answer:	This hose head is the push-on type. Thread size shouldn't matter. It works with both Presta and Schrader valves.
Question:	I have a Bontrager Charger floor pump and the head blew out. Will this replacement fit? The picture suggests it comes with hose adapters
Answer:	Works great with Bontranger Charger. None of the included adapters were needed. Unscrew the plastic boot at the base of the old hose, and pull the hose off. On the new hose, unscrew its boot from the adapter plug that comes installed on it and pull out the adapter plug. Push the new hose onto the pump, and screw on the new plastic boot. Perfect fit.
Question:	I have a hurricane pump purchased at performance bike. the valve head leaks. can i upgrade upgrade using topeak smarthead
Answer:	The SmartHead hose diameters are: 27/64 O.D. 5/32 I.D. I just used my old connector and cut the old hose off. It fit fine (I have a Topeak Joe Blow, not your pump). I believe the kit comes with a few adaptors, so I expect you can make it work. The smarthead is great...much better than what my pump came with. You won't be sorry. Cheers, Gary
Question:	Would like to use it on the Astro 3018 Digital Tire Inflator It has a 3/8" male hose. Anyway to do that
Answer:	I had a fit issue on my Silca Floor Pump. I bought the Topeak Smarthead and their hose and connected it using a brass Universal Pipe Thread reducer at the pump with a small hose clamp. I thought it might blow off someday, but it's still holding after five years.

• Used by both professional and amateur riders alike
• Made using high quality materials and components
• Tested to ensure quality and durability
• Head Smart Head/Gauge Digital - PSI, Bar, kg/cm2
• Battery CR2032 x 1 (included)
• Capacity Reads 250 psi/17 bar
• Size (L x W x H) 10.2 x 4.5 x 3.5 cm/4" x 1.8" x 1.4"

User questions & answers

Question:	Does this work correctly with presta valves? i know the description says so, but other gauges also claim that and do not perform well with them
Answer:	I found that removing the spring from the nozzle makes this very easy (i.e. no leakage) to use with presta valves. It also still works on Schrader valves without the spring.
Question:	How big is this? Is it small enough to fit comfortably in a seatpack on a road bike
Answer:	Don't buy a gauge that goes up to 60 if you need to measure less than 5. That's just common sense. If you need to measure 3-5 psi, buy an 8-10 psi gauge, which sounds like a specialty tool.
Question:	How does the air release reading work on this?! i press the release button and air is escaping but the psi doesn't lower on the readout
Answer:	Contact Joes Racing to obtain a Spec & Data Sheet. 1-877-267-1525. Best,
Question:	Will this work on Presta and Shrader valves
Answer:	I think it is +/- 3% of full scale deflection. So on a 60 PSI max Gauge it would be +/- 1.8 PSI throughout the entire scale. Besides being able to read the gauge more accurately and buy one in the range your working with like for me its regular car tires so 60 PSI is best and the dial has 1 PSI markings if you get a 120 PSI Gauge with 2 PSI markings 3% of that is now +/- 3.6 PSI which is not good for standard tire measurements which are in the 30 PSI range. Overkill is not good with gauges

Product features

SmartGauge D2

The SmartGauge D2 is an precision, lightweight, all-purpose air pressure gauge. Packed with features, it is an essential tool whether you are fine-tuning the pressure on your tires, your suspension, or just to keep in the glove box of your car for when you need it.

Body: Engineering grade plastic

Size: 4"x1.8"x1.4"

Weight: 65 gr

ART#: TSG-02

Product description

Blast through repairs on the fly and get back to riding. The Ratchet Rocket multi-tool by Top Peak has 10 functions packed in to one place for much needed convenience. A few of these include metal tire levers, a #2 Phillips screw driver, 8mm box wrench, Allen bits, a chain tool, a ratchet tool, a secondary chain link fence, a chain pin breaker, a magnetic bit holder, a band clamp mount, and a QR clamp water bottle boss mount.Features: 10 functions Allen bits 2, 2.5, 3, 4 (2 pieces), 5, and 6mm 8mm box wrench CrMo steel chain tool #2 Phillips screw driver Ratchet tool 2 aluminum tire levers for emergency use only Secondary chain link fence Chain pin breaker Magnetic bit holder QR clamp water bottle boss mount, Band clamp mount (F55-L)

• 10 Tools Total
• Mini Tools Convenience w/ the speed of a reversing ratchet.
• 192 g / 0.42 lb (w/ storage
• Material: Hardened Steel Bits (Tools), Cast Aluminum (Body)
• QR Clamp Water bottle Boss Mount Incuded

User questions & answers

Question:	Can you set the torque
Answer:	Yes, it doesn't have a flat head screwdriver.
Question:	Where is this product made
Answer:	There's a metal hex key inside one of the tire levers. I've used it several times and it's plenty strong. You're more likely to break the platforms that hold the chain links than you are the tire lever.
Question:	How good is the included chain tool to break 9 and 10 speed chains
Answer:	While the valve core remover notch exists on a tire lever, in practice it’s nearly useless. In order to screw on/off a valve core the spokes prevent you from unwinding given the position of the notch on the tire lever. In my view it’s totally impractical to use as a proper valve core remover
Question:	What is the length of the ratchet
Answer:	Hi, Unfortunately, I've only used the Joe Blow Sport II pumps and so couldn't say. I would contact Topeak and ask them directly. Hope that helps. Best JM

Product description

30 function multi-tool packed into a custom protective case that mounts to any round tube or seatpost (ø25 mm - ø33 mm) with a secure quick release strap.

• The sleek 2-piece cast Carom chain tool is compatible with all single speed and most multi-speed chains, including 10 speed hollow pin chains(Not compatible with 11 speed chains) Tire levers and glue less patches round out this incredible kit
• Virtually every tool needed to repair a road or mountain bike is included in this mini take along toolbox There's also a special compartment to securely store two removable chain links and pins
• Chain pins and links compartment + Disc Brake Spacer (Chain pins and links are not included)
• Integrated chain hook holds links during assembly Chain Pin Breaker
• T15 / T25 Torx Wrenches, 14G / 15G / Mavic M7 / Shimano compatible Spoke Wrenches, 8 / 10 mm Open Wrenches, #2 Phillips Screw Driver, 8 mm Socket Hex, 1.5 / 2 / 2.5 / 3 / 4 / 5 / 6 mm Allen Wrenches

User questions & answers

Question:	Does it work on Shimano bikes
Answer:	yellow gold
Question:	Dose it have a 8mm alen wrench
Answer:	I purchased a brown (natural) strap from them. It was very high-quality and solid leather but not listed as reversible. I would think that there would be finished leather (hard surface) on both sides of this one. Good buy, nice strap.
Question:	Is this the 17 or 23 piece kit
Answer:	Can always be shortened but not lengthened beyond the specifications.
Question:	What are the dimensions of the box
Answer:	I just measured one from inventory and it will be 65 inches when FULLY extended. I suspect someone was just doing a "cut and paste" when listing and copied the wrong length.

Product features

SURVIVAL GEAR BOX

30 function multi-tool packed into a custom protective case that mounts to any round tube or seat post (ø25 mm - ø33 mm) with a secure quick release strap. ＊The chain tool is compatible with single and multi-speed chains up to 12 speed, NOT including Campagnolo 11 speed hollow pin chains.

Breaker

Chain pin breaker

Compartment

Chain pins & links compartment

Spacer

Disc brake spacer

Added Features

Secondary chain link fence, Chain pin breaker Air release button, Sand paper, Mini hammer 2 Chain pins & 2 links compartment Self-tightening tool

FUNCTIONS 30

Product description

Reversible ratcheting head and tool kit in a nylon bag..

Includes CV hardened-steel tools in 2, 2.5, 3, 4, 5, 6 and 8mm hex, T25 torx and #2 phillips bits.

Size 4.6in. x 2.2in. x 8in..

Weight: 3.62oz.

• Reversible ratcheting head and tool kit in a nylon bag.
• Includes CV hardened-steel tools in 2, 2.5, 3, 4, 5, 6 and 8mm hex, T25 torx and #2 phillips bits
• Size 4.6in. x 2.2in. x 8in.
• Weight: 3.62oz.

Product features

RATCHET ROCKET LITE DX

Features a fine tooth ratchet mechanism with reverse lever and thumb wheel for quick rotation and control in tight spots and includes hardened steel tools in 2, 2.5, 3, 4, 5, 6 and 8 mm hex, T10, T15, T25 Torx and #2 Phillips bits, two engineering grade polymer tire levers and magnetic bit holder.

Compatible

Ratchet driver is compatible with Topeak TorqBits

Added T15 Torx bit for installing Ninja accessory on Tri-Cage series with ease

Reversing Ratchet

Reversing ratchet with thumb wheel action

Magnetic Holder

Magnetic holder secures bits and adds leverage

Protective Case

Protective case keeps things organized and secure

Product description

Topeak Floor Pump Parts.

• Pump Model: Rebuild Kit for Joe Blow

User questions & answers

Question:	Has anyone used a lubricant on the O ring in the main cylinder? If so, what type of lubricant
Answer:	Yes, it includes a saddle bag, and all items can be placed in the saddle bag.
Question:	What is this topeak repair kit number? they recommend a trk-jb01 for the joeblow pro repair
Answer:	I have the leopard print strap with gold buckles, and I love it.
Question:	what's the O-ring size? (inside diameter, outside diameter and width
Answer:	It’s definitely red, and reminds me of a suspender. I never used it
Question:	Does this kit have a 'check valve' included ? Our Joe Blow pump won't hold pressure. (once pressure is in tire, handle pushes back up
Answer:	It looks like it is vegan.