8 best wood furnaces

Product description

This US Stove Replacement Blower Motor allows for easy do-it-yourself repair. For use with US Stove units: 24A, 30A, and the 1300, 1400 and 1500 series furnaces. Features the following specs: 120 volts, 60 Hz, 1620 RPM, 300 Watts, and 2.6 Amps. US Stove has been bringing warmth to homes across the nation for 140 years. US Stove has a wide range of Automatic Circulators, Plate Steel Heaters, Cast Iron Heaters, Pellet/Multi-Fuel Heaters and Gas Fireplaces from which to choose. The large selection of stoves and accessories will ensure warmth of your home with safe, quality products.

• Replacement blower motor for US Stove models: 24A, 30A, and the 1300, 1400 and 1500 series furnaces
• Heavy duty bearings
• Easy installation
• Increases efficiency
• Easy, do-it-yourself replacement for worn out or nonworking blowers

User questions & answers

Question:	Will it work on a1357 hotblast stove
Answer:	It should, it says that it is for the 1300, 1400, and 1500 series furnaces.
Question:	Does it have 2 Oilers on it? Are old one does
Answer:	This model has no oilers. It has sealed bearings.
Question:	Does this fit aps1100b
Answer:	no. you want to get the CB36 blower kit for that stove.
Question:	Does this fit us stove model 1602r
Answer:	I do believe it does
Question:	Will this fit a classic
Answer:	Yes it does and you will have a little extra of the rope
Question:	i have an older central boiler the circumference is approximately 10 feet. will this fit
Answer:	what is your model number (it should be on the front of your door). Then look up the number on Central Boiler that will tell what size seal you need.
Question:	Is this 1" rope
Answer:	7/8 in
Question:	can you install in when the door is hot during use
Answer:	Would personally recommend letting the fire die down and cleaning out the ashes. Let the boiler cool enough you won't get burned. Installing while warm would work, (not hot), with proper protective clothing and gloves.

Product description

This is an O.E.M. authorized part. Fits various Honeywell models . OEM Part Number L4064B2236. This product is manufactured in USA.

From the Manufacturer

For control of high limit and fan motor in all types of forced air heating systems

• Made in China
• Package height :34.544 cm
• Package length :8.128 cm
• Package width :8.89 cm

User questions & answers

Question:	Will this work on a HotBlast us stove model
Answer:	It sure does look similar to the one I see depicted in a search. Here's the nut of it: the Honeywell device, like any control device, measures its physical surroundings in some way to produce a piece of information used to affect a change of state in another system. In this case, a helical compound bar increases its length on one layer to push a lever which turns a dial to close a switch, turning on a fan. It ought to work, but, one would need to be confident with the electrical schematic included, and familiar with the internal workings. It might be that a different size of compound bar reads its surroundings differently given its specific surface area. This may have some effect on how the threshold dials are set. Proceed with informed caution, but the two devices appear to achieve the same general function. This design appears to have been manufactured for several decades, and has the character of a successful generic.
Question:	Will this item l4064b2236 replace my switch l4064b
Answer:	Yes, these switches are compatible.
Question:	Will this replace ac-1339 on mt englander wood furnace
Answer:	I truly do NOT know the answer related to your furnace. I would check with your manufacturer. We needed this part as related to our gas furnace. Good luck @
Question:	SHOW proper settings
Answer:	there are 2 setting bars and 3rd preset bar which is at 200. 1st bar I set mine at 70. for cool down 2nd bar set at 115.for fan start up.. you can set yours different if you like ,but when you set the bars use your finger to hold the dial from moving while you move the bars so you don't stetch the heating cold spring.
Question:	Would this be a to be used for a spray paint booth ventilation system
Answer:	Absolutely. I use my blower to pull micro-organic matter burned out during my kiln firings.
Question:	will this fit a E-classic 3250 boiler
Answer:	I’m not sure
Question:	Does this dayton 1tdp7 psc blower have sealed ball bearings or bushing which must be oiled occasionally
Answer:	They are sealed
Question:	Single speed
Answer:	Yes

Product description

Furnace Flue Exhaust Blower 0.8 amps, 115 volt Flange 2.25" x 2.25" With Variable Speed Control 1 Year Manufacture Warranty

• Heritage & Nordica Diamond Wall Furnace Blower
• Newmac Wood Furnace 2040001

User questions & answers

Question:	The part number on my original fan is 7017011. Is this equivalent
Answer:	I have a Newmac 150,000 BTU oil/wood hot air furnace and replaced my blower with the one I thought I bought on Ebay which might have been a secretly Amazon offering. I much prefer the new blower as it has a rheostat for fan speed which will hopefully cut down on creosote since it CAN run faster. I've been having increasing buildup last few years so added to my change to dry wood instead of wood cut the previous winter and late Spring I'm hoping to get rid of this problem. I think the original rattletrap blower had been going for some time-so much for lifetime bearings!
Question:	What is cfm,&what is max rpms
Answer:	The blower is rated at 100 CFM, 1/65hp, .7 amps
Question:	how far apart are the mounting holes, and what is the diameter of the opening, finally how loud is it
Answer:	The holes are 2 1/2 in apart. My old fan was 3. I took the mount face of the old one, and mounted the new one to it with metal screws. The fan works perfect, and isn't to noisy. Saved me a lot of money over buying a replacement from a fireplace store. I have a older Blaze Queen.

Product description

A Vent Cover That Stays In Place… Finally!



If you need to cover your vents and don’t want to use paper thin vent protectors that fall from the ceiling, look no further than the Extra Magnetic 3-Pack by NextClimb.



The Benefits Of Improved Magnetic Materials And Design Include…



- Extra strong magnetic grip



- Lightweight design to lock vents in place on the wall or ceiling.



- Still flexible enough to contours itself around your vents to seal off airflow completely.







Normally priced at $29.99, we’re currently discounting this 3-pack so buy yours and start saving on energy bills today!

• Sit, Stay, Good Cover! - Double Thick magnetized material grips your floor vents with twice the strength. Double weight keeps the cover securely in place.
• Save Money On Heating! Flexible material contours itself around your vents to seal off airflow completely
• A Perfect Fit! 5.5”x 12” is designed to match most standard air registers and fireplace vents.
• Looks Great In Your Home! Woodgrain veneer looks great on the floors in your kitchen, bathroom, or living room.
• Easily Cut To Any Size! Even at twice normal thickness, these covers can be adjusted to fit your specific vents.

User questions & answers

Question:	Can these be cut to size? I have smaller floor vents that I no longer need to use
Answer:	They are 1/8" thick. With the proper tool, they can be cut.
Question:	Note states not for ceiling vents. Could you please explain why it could not be used on a ceiling vent
Answer:	IDK, I use mine on a wall vent. But it sticks very well so I imagine it could work for a ceiling vent.
Question:	Has anyone had success using these on a ceiling vent? Why can’t these be used on ceiling vents? If they’re extra strong I can’t see why not
Answer:	Only use them on floor vents but magnets seem to be strong, will try on top vent and see if hold....did not hold on my top vents
Question:	Is the magnet strong enough to work on wall registers
Answer:	No this is strictly for floor vents. The weight of the extra magnetic material is to much to hold in place on the wall

Product description

This has been the benchmark Furnace Cement for over 90 years. Rutland Furnace Cement is a pre-mixed silicate cement that withstands temperatures over 2000° Fahrenheit without failure. The smooth consistency feathers very thin to make metal-to-metal joints smoke and gas tight. For installation and service of furnaces and oil burners. Seals flues and coal or ash pit doors. Also for small woodstove repairs.

• Great cement for small repairs or big rebuilds, easy to use and clean up
• Smooth consistency cement bonds and seals metal to metal or metal to masonry joints
• Repair stove cracks and seals, reset firebrick, attach your stove collar, glue ceramic logs
• Rated to withstand up to 2000° F (1090° C)

User questions & answers

Question:	Can it be used with Ceramic or Porcelin tiles to surround a wood burning stove
Answer:	If you are speaking of a "wall surround" behind the stove, I would say no. I would use the typical cement that is designed for ceramic tile installation. This furnace cement is a product designed to be used on the stove itself or on stovepipes. It is fast drying as well. I would not use it on your surround.
Question:	Is this rated for exterior use or interior only
Answer:	I believe it is for interior use only.
Question:	Can this be used to glue soft insulating firebricks together? Like for a mini forge
Answer:	Just my opinion, but I think it would be ideal. The furnace cement I bought was used to bond the stovepipe metal to the stove and the masonry chimney, and it worked well. Instructions on the jar indicated the masonry needs to be damp for proper adherence and then allowed to dry for a day or so before use. Get the gray cement if your bricks are gray, if possible, becaust the black gets EVERYWHERE.

Product features

Rutland Black Furnace Cement - 16 fl. oz. Tub

Rutland Furnace Cement is premixed and ready to use, making it one of the easiest cements to apply. Use this smooth consistency cement to bond and seal metal to metal or metal to masonry joints less than 1/8″. Fix a crack, seal the collar to the top of a wood stove, or seal between firebricks and prefabricated fireplace. Use this cement anywhere a quality high-temperature adhesive is required for furnaces, firebrick repair, filling gaps, sealing joints, or gluing ceramic logs. Adheres to metal, stone, and firebricks, creating a permanent smoke- and gas-tight seal.

• Rated to withstand up to 2000°F (1090°C)
• Indoor use only
• Requires heat cure
• Made in the USA

Rutland Black Furnace Cement - 32 fl. oz. Tub

Rutland Furnace Cement is premixed and ready to use, making it one of the easiest cements to apply. Use this smooth consistency cement to bond and seal metal to metal or metal to masonry joints less than 1/8″. Fix a crack, seal the collar to the top of a wood stove, or seal between firebricks and prefabricated fireplace. Use this cement anywhere a quality high-temperature adhesive is required for furnaces, firebrick repair, filling gaps, sealing joints, or gluing ceramic logs. Adheres to metal, stone, and firebricks, creating a permanent smoke- and gas-tight seal.

• Rated to withstand up to 2000°F (1090°C)
• Indoor use only
• Requires heat cure
• Made in the USA

Rutland Black Furnace Cement - 8 fl. oz. Tub

Rutland Furnace Cement is premixed and ready to use, making it one of the easiest cements to apply. Use this smooth consistency cement to bond and seal metal to metal or metal to masonry joints less than 1/8″. Fix a crack, seal the collar to the top of a wood stove, or seal between firebricks and prefabricated fireplace. Use this cement anywhere a quality high-temperature adhesive is required for furnaces, firebrick repair, filling gaps, sealing joints, or gluing ceramic logs. Adheres to metal, stone, and firebricks, creating a permanent smoke- and gas-tight seal.

• Rated to withstand up to 2000°F (1090°C)
• Indoor use only
• Requires heat cure
• Made in the USA

Rutland Black Furnace Cement - 10.3 fl. oz Cartridge

Rutland Furnace Cement is premixed and ready to use, making it one of the easiest cements to apply. Use this smooth consistency cement to bond and seal metal to metal or metal to masonry joints less than 1/8″. Fix a crack, seal the collar to the top of a wood stove, or seal between firebricks and prefabricated fireplace. Use this cement anywhere a quality high-temperature adhesive is required for furnaces, firebrick repair, filling gaps, sealing joints, or gluing ceramic logs. Adheres to metal, stone, and firebricks, creating a permanent smoke- and gas-tight seal.

• Rated to withstand up to 2000°F (1090°C)
• Indoor use only
• Requires heat cure
• Made in the USA

Rutland Products Fit Your Lifestyle!

Rutland Fire Clay Company, also known as Rutland Products, has been the leading manufacturer of stove and fireplace maintenance products since 1883. Over the last 130+ years, Rutland Products has grown from a small, family-owned business in Rutland, Vermont to a leading manufacturer within the industry. Whether your lifestyle is fast, furious, and stressful or laid back and care-free, Rutland Products offers you the opportunity to enjoy life just a bit more with our line of quality fireplace, chimney, and hearth lifestyle products, maintenance products, and accessories. Serving the needs of homeowners and professionals alike, our product line includes fire starters, creosote, and soot removers, high temperature silicone sealants, cements and mortars, stove door replacement gaskets, chimney cleaning rods and brushes, and more!

Rutland Products Make Life Fun

Enhance the ambiance of your next wood fire by adding beautiful blue and green flames with Rutland Rainbow Flame Crystals! Simply shake about 1/2 cup of crystals onto a hot bed of coals or toss one of our convenient Rainbow Flame Sticks into the fire and watch the flames change colors. Use indoors or outdoors. Fun for the whole family!

Rutland Products Make Life Safe

Rutland Safe Lite Fire Starter Squares are easy to light, even when wet! These fire starters are nontoxic and made of recycled wood materials and wax. No more dangerous flare-ups! Only 1 – 2 squares are needed to start a fire. These economical fire starters are great for indoor or outdoor fireplaces, wood stoves, and fire pits!

Rutland Products Make Life Easy

Rutland Stove, Grill & Hearth Conditioning Glass Cleaner is a versatile cleaner that easily removes baked-on soot, creosote, carbon, and other mineral residues from glass doors of fireplace inserts and stoves. It also has countless uses around the house, including ceramic cook tops, stainless steel, chrome, porcelain, tile, fiberglass shower doors, and more! Leaves behind a thin, protective silicone layer to make the next cleaning even easier!

Product description

This has been the benchmark Furnace Cement for over 90 years. Rutland Furnace Cement is a pre-mixed silicate cement that withstands temperatures over 2000° Fahrenheit without failure. The smooth consistency feathers very thin to make metal-to-metal joints smoke and gas tight. For installation and service of furnaces and oil burners. Seals flues and coal or ash pit doors. Also for small woodstove repairs.

• Great cement for small repairs or big rebuilds, easy to use and clean up
• Smooth consistency cement bonds and seals metal to metal or metal to masonry joints
• Repair stove cracks and seals, reset firebrick, attach your stove collar, glue ceramic logs
• Approximate Coverage: 99 feet (10.3 oz.) with 1/8" bead
• Rated to withstand up to 2000° F (1090° C)

User questions & answers

Question:	Can I use this to seal an ash dump
Answer:	As long as you can properly perform a heat=cure in that area, then yes you can use this to seal the ash dump. If you are unable to reach the temperatures necessary to heat-cure this product (500-degrees F) then your best bet would be to use one of our High Temp RTV Silicone Sealants to seal around that area.
Question:	Can I use this on a gasket for my Harman pellet stove
Answer:	Yes, if a heat cure is performed.
Question:	I have a fire pit and this says for use on metal surfaces but will it hold bricks together
Answer:	I don't know. I used it on metal and so far so good.
Question:	Can this be used to fill a crack in a Big Green Egg and if so would it stand up to the heat of the grill
Answer:	We do not recommend using this product to repair a crack in a Big Green Egg as this is designed for metal-to-metal or metal-to-masonry applications. You can use Rutland Products Castable Refractory Cement to make repairs to the cracks, once allowed to dry for 24 hours, this Castable Refractory Cement can be exposed to temperatures up to 2,200-degrees F.

Product features

Rutland Black Furnace Cement - 16 fl. oz. Tub

Rutland Furnace Cement is premixed and ready to use, making it one of the easiest cements to apply. Use this smooth consistency cement to bond and seal metal to metal or metal to masonry joints less than 1/8″. Fix a crack, seal the collar to the top of a wood stove, or seal between firebricks and prefabricated fireplace. Use this cement anywhere a quality high-temperature adhesive is required for furnaces, firebrick repair, filling gaps, sealing joints, or gluing ceramic logs. Adheres to metal, stone, and firebricks, creating a permanent smoke- and gas-tight seal.

• Rated to withstand up to 2000°F (1090°C)
• Indoor use only
• Requires heat cure
• Made in the USA

Rutland Black Furnace Cement - 32 fl. oz. Tub

Rutland Furnace Cement is premixed and ready to use, making it one of the easiest cements to apply. Use this smooth consistency cement to bond and seal metal to metal or metal to masonry joints less than 1/8″. Fix a crack, seal the collar to the top of a wood stove, or seal between firebricks and prefabricated fireplace. Use this cement anywhere a quality high-temperature adhesive is required for furnaces, firebrick repair, filling gaps, sealing joints, or gluing ceramic logs. Adheres to metal, stone, and firebricks, creating a permanent smoke- and gas-tight seal.

• Rated to withstand up to 2000°F (1090°C)
• Indoor use only
• Requires heat cure
• Made in the USA

Rutland Black Furnace Cement - 8 fl. oz. Tub

Rutland Furnace Cement is premixed and ready to use, making it one of the easiest cements to apply. Use this smooth consistency cement to bond and seal metal to metal or metal to masonry joints less than 1/8″. Fix a crack, seal the collar to the top of a wood stove, or seal between firebricks and prefabricated fireplace. Use this cement anywhere a quality high-temperature adhesive is required for furnaces, firebrick repair, filling gaps, sealing joints, or gluing ceramic logs. Adheres to metal, stone, and firebricks, creating a permanent smoke- and gas-tight seal.

• Rated to withstand up to 2000°F (1090°C)
• Indoor use only
• Requires heat cure
• Made in the USA

Rutland Black Furnace Cement - 10.3 fl. oz Cartridge

Rutland Furnace Cement is premixed and ready to use, making it one of the easiest cements to apply. Use this smooth consistency cement to bond and seal metal to metal or metal to masonry joints less than 1/8″. Fix a crack, seal the collar to the top of a wood stove, or seal between firebricks and prefabricated fireplace. Use this cement anywhere a quality high-temperature adhesive is required for furnaces, firebrick repair, filling gaps, sealing joints, or gluing ceramic logs. Adheres to metal, stone, and firebricks, creating a permanent smoke- and gas-tight seal.

• Rated to withstand up to 2000°F (1090°C)
• Indoor use only
• Requires heat cure
• Made in the USA

Rutland Products Fit Your Lifestyle!

Rutland Fire Clay Company, also known as Rutland Products, has been the leading manufacturer of stove and fireplace maintenance products since 1883. Over the last 130+ years, Rutland Products has grown from a small, family-owned business in Rutland, Vermont to a leading manufacturer within the industry. Whether your lifestyle is fast, furious, and stressful or laid back and care-free, Rutland Products offers you the opportunity to enjoy life just a bit more with our line of quality fireplace, chimney, and hearth lifestyle products, maintenance products, and accessories. Serving the needs of homeowners and professionals alike, our product line includes fire starters, creosote, and soot removers, high temperature silicone sealants, cements and mortars, stove door replacement gaskets, chimney cleaning rods and brushes, and more!

Rutland Products Make Life Fun

Enhance the ambiance of your next wood fire by adding beautiful blue and green flames with Rutland Rainbow Flame Crystals! Simply shake about 1/2 cup of crystals onto a hot bed of coals or toss one of our convenient Rainbow Flame Sticks into the fire and watch the flames change colors. Use indoors or outdoors. Fun for the whole family!

Rutland Products Make Life Safe

Rutland Safe Lite Fire Starter Squares are easy to light, even when wet! These fire starters are nontoxic and made of recycled wood materials and wax. No more dangerous flare-ups! Only 1 – 2 squares are needed to start a fire. These economical fire starters are great for indoor or outdoor fireplaces, wood stoves, and fire pits!

Rutland Products Make Life Easy

Rutland Stove, Grill & Hearth Conditioning Glass Cleaner is a versatile cleaner that easily removes baked-on soot, creosote, carbon, and other mineral residues from glass doors of fireplace inserts and stoves. It also has countless uses around the house, including ceramic cook tops, stainless steel, chrome, porcelain, tile, fiberglass shower doors, and more! Leaves behind a thin, protective silicone layer to make the next cleaning even easier!

• Kevlar Insulated Cotton with Air-isolated Aluminum Foil
• Imported
• 【REINFORCED DOUBLE LAYER KEVLAER PADDING ON FINGER,PALM,ELBOW & BACK】:RAPICCA is the only brand which offer Double Reinforced Kevlar Layer Pading on both Fingers, Palms, Elbow& Backs on our welding gloves, this excellent design make RAPICCA welding gloves being the most extreme heat resistant gloves on the market.
• 【EXTREME FOUR LAYER HEAT RESISTANT PROTECTION】 Outermost layer: Double layer kevlar padding leather. Intermediate layer: a composite product by laminating a kind of high temperature resistant Air-isolated Aluminum Foil and a flame retardant cotton cloth . Inner layer:a 100% soft insulated cotton lining. Flame retardant thread stitching for advanced heat and cold resistance, sweat absorbent, breathable, allergy free. These gloves are guaranteed to withstand extreme temperatures up to 932°F(500℃)
• 【SUPERIOR SECURITY FOR FORERAMS】 - The 16 inches extra long glove with 7.5 inches long sleeve protect your forearms from grinding debris, welding sparks, hot coals and open flames, hot kitchen ware and hot steam. Effective even in extreme environments. Recommended for Stick welding (SMAW), Mig welding (GMAW), Flux-Core welding (FCAW), forging or other high temperature applications, Provide the most extreme heat protection.
• 【EXTREME WEAR RESISTANT PROTECTION】- The Gloves are made from 1.5mm thick and soft shoulder split natural cowhide leather which is heat resistant, wear-resistant, puncture resistant, cut resistant, oil resistant. Reinforced double leather stitching and high strength sewing on the finger, palm, elbow & back of the hand which is not easy to fall off.
• 【SATISFACTION GUARANTEE】——We back up our claim that this glove is the best on the market. You can rest easy with your purchase. If there is any issue or advice for our products, please email us via Amazon email, we will offer 100% satisfactory service for you.

Product features

Traditional Stick/MIG Welding Gloves, Leather BBQ Gloves, Wood Stove Gloves

Made of heat resistant and flame resistant split leather, RAPICCA is the only brand which offer double reinforced Kevlar pading on both Fingers, Palms, Elbow & Backs,all sewed by Kevlar stitching, this excellent design make RAPICCA blue welding gloves being the most extreme heat resistant gloves on the market.They could provide extreme high heat protection up to 932°F(500℃) The 16 inches extra long gloves protect your hand as well as your forearms from high heat hazard!

Reinforced Kevlar Padding On Five Fingers

All sewed by Kevlar Stitching, the double reinforced Kavlar padding on five fingers provide an extreme heat resistant protection and a great grip.

Reinforced Kavlar Padding On Elbow

All sewed by Kevlar Stitching, the double reinforced Kavlar padding on elbow prevent tears and increase durability.

Reinforced Kavlar Padding On Back

All sewed by Kevlar Stitching, the double reinforced Kavlar padding on back protects the hands from spatter, flames and sparks while also providing heat resistance.

Flame Retardant Insulated Liner

Outermost layer: Double layer kevlar padding leather. Intermediate layer: a composite product by laminating a kind of high temperature resistant Air-isolated Aluminum Foil and a flame retardant cotton cloth . Inner layer:a 100% soft flame retardant insulated cotton liner.

Long Sleeve to Protect your Forearm

16 inches Long Sleeve protect your forearm and hands from heat spark and hot coals or open flames.

Notes & Maintenance:

Note:

These gloves are not meant for prolonged direct contact to a hot grill grate or hot metal cookware for a long time.(About 15 Secords)

Maintenance:

Wipe clean with a damp cloth; Hang to dry. Don't machine wash or wet.

Product description

US Stove has been bringing warmth to homes across the nation for 140-year. US Stove has a wide range of Automatic Circulators, Plate Steel Heaters, Cast Iron Heaters, Pellet/Multi-Fuel Heaters and Gas Fireplaces from which to choose. The large selection of stoves and accessories will ensure warmth of your home with safe, quality products.

• US Stove Company has been keeping America warm since 1869
• Made from heavy cast iron
• Genuine USSC parts
• Easy Do-it-yourself Repair
• Wood / coal shaker grate frame for models: 1300, 1500, 1537, 1557M, 22AF

User questions & answers

Question:	Will this fit Norseman
Answer:	It may depend on the age of the stove. Is it older than 2012?
Question:	Will this fit the 1537g
Answer:	U have to get your part number from your book,or the manufacturer,but yes it is for a US STOVE
Question:	How many do i need
Answer:	If this is the grate you need then the answer is two. Double check the owners booklet for your model number if you have two shaker grates then you will need two frames if replacing both. They seem to last longer if you reverse their position each year move front to back and back to front the fire is hotter near the air intake and that one seems to warp quicker. I have had my stove 12years and this is the first time I have replaced the frames the grates do not last as long.
Question:	What are the dimensions of the frame
Answer:	The outside measures 13 1/4" long, 9 1/2" wide and 1 7/8" deep. The grate opening is 5 3/4" by 11".