12 best heated atv grips

Heated ATV grips are a popular accessory for all-terrain vehicles (ATVs) and are designed to provide warmth and comfort to the rider's hands during cold weather conditions. These grips are a valuable addition to the handlebars of an ATV, enhancing the overall riding experience by keeping the hands warm and preventing numbness in low temperatures. Here are some key features and information about heated ATV grips:

Heating Elements: Heated ATV grips are equipped with integrated heating elements that generate warmth when activated. These elements are typically made of materials like resistive wire or carbon fiber, which are known for their efficient heating properties.
Temperature Control: Most heated ATV grips come with adjustable temperature settings, allowing riders to select their preferred level of warmth.Some models offer multiple heat settings, enabling users to tailor the heat output to the prevailing weather conditions.
Easy Installation: These grips are designed for relatively easy installation, often requiring basic hand tools. They can be installed as an aftermarket accessory or come pre-installed on some ATV models.
Power Source: Heated grips require a power source to operate. They are typically connected to the ATV's electrical system, drawing power from the vehicle's battery. It's important to ensure that the ATV's electrical system can support the additional load.
Wiring and Controls: Heated grips usually have a control unit or switch that allows riders to turn the heating elements on and off. The control unit is often mounted on the handlebars for easy access while riding.
Safety: Heated ATV grips are designed with safety in mind. They are equipped with features such as overheat protection to prevent damage and ensure rider safety. Some models also have automatic shut-off timers.
Weatherproof Design: Quality heated grips are built to withstand the rigors of off-road riding and exposure to the elements. They are typically weatherproof or waterproof to prevent damage from moisture and dirt.
Compatibility: When purchasing heated ATV grips, it's important to ensure compatibility with your specific ATV model and handlebar size. Universal options are available, but some grips may be designed for specific ATV brands or models.
Benefits: Heated ATV grips offer several benefits, including improved comfort during cold rides, enhanced grip due to reduced hand fatigue, and increased safety by maintaining dexterity in the hands.
Maintenance: To ensure the longevity of heated grips, regular maintenance is recommended. This may include cleaning, inspecting wiring connections, and checking for any signs of wear or damage.

In conclusion, heated ATV grips are a valuable accessory for ATV enthusiasts who ride in cold or chilly conditions. They provide comfort, warmth, and safety benefits, allowing riders to enjoy their ATV adventures even in less-than-ideal weather. Proper installation and maintenance are essential to maximize the performance and lifespan of these grips.

Below you can find our editor's choice of the best heated atv grips on the market

Heat Demon 215049 High/Low ATV Clamp-On Heated Grip Kit with Round Rocker Switch

Heat Demon

Based on 232 reviews Check latest price

Product description

CLAMP-ON GRIP KIT

Fits all ATV makes and models with a 7/8" handlebar
Two heated clamp-on grips - no adhesive required for installation
Comes with a 3-position (off, low, high) round rocker switch
Maximum 40 watts (20 per grip) at 14 volts
Kit includes everything needed for simple installation

User questions & answers

Question:	will they fit on a Polaris sportsman atv
Answer:	Yes, I installed on a 2007 Sportsman 500 deluxe, worked great, you will have to drill hole in headlight housing for toggle switch, and use compressed air to get old grips off, works like magic. Put air nozzel in hole on end of old grips and they will come off very easy
Question:	is the heat good enough to warm my hands through gloves? hands still get cold with gloves on in colorado, was hoping its strong enough to heat through
Answer:	I am not sure, I am going to Colorado on a combo deer/elk hunt next month and have not used them in the cold weather yet. A friend has a set from a competitor brand and swears by them. I am thinking they will be plenty warm. I had them professionally installed to the ignition. Otherwise, they could drain the battery.
Question:	Can I get heated grips for non-battery machine
Answer:	Nope. Needs 12v power and a good ground
Question:	Is the switch on this weatherproof? Given only 40w, is it recommended to use a relay or just to use an ignition wire
Answer:	The wires do not have sealed connections but they sit under my ATV's panels so I'm not worried about water. You could seal off the wires with heat shrink tubing if you want a good seal. The instructions recommend just using an ignition wire. That's exactly what I did and I have not run into any problems.

Heat Demon 215047 Dual Zone ATV Clamp-On Heated Grip Kit

Heat Demon

Based on 293 reviews Check latest price

Product description

The Dual Zone ATV Clamp-On Heated Grip kit was designed to keep your hands and thumbs warm while riding or working in cold weather, with an easy-to-install grip and thumb warmer. Our innovative design let's you independently control the amount of heat you desire for the grips and thumb warmer with the Dual Zone controller. The control unit has multiple mounting options, adjustable LEDs for day or night operation and will shut off automatically after two hours to save your battery life.

Fits all ATV makes and models with a 7/8" handlebar
Two heated clamp-on grips and one adhesive-backed silicone thumb warmer
Dual-Zone Controller - select your thumb and grip heat levels separately
Maximum 45 watts (20 per grip, 5 per thumb warmer) at 14 volts
Kit includes everything needed for simple installation

User questions & answers

Question:	Will these work on a snowmobile
Answer:	Yes. They would work but the heated mittens/bar warmers maybe better
Question:	I see "push on" or "clamp on" versions of these heated grips. Does one work better than the other
Answer:	Hi, I went for the clamp on version, being an engineer I like the option to remove/reposition etc. It's a good tight fit and I simply couldn't be happier with the grips a season later. The only negative being the flimsy plastic bracket that hold the little control box to the bars, although it hasn't broken, it's just a cheap part on an otherwise excellent set up.
Question:	Is heat shrink tubing included for the thumb warmer
Answer:	Yes. heat shrink tubing is included for the thumb warmer.
Question:	Will these fit a arctic cat 650 v twin automatic 4x4 atv cat green
Answer:	Yes

BikeMaster Heated Grips (7/8)

BikeMaster

Based on 419 reviews Check latest price

Product description

At BikeMaster, they understand the quality and performance that motorcycle owners demand.

For twist throttle applications
This new elegant grip design with revolutionary heating structure delivers heat faster than ever. The new five-level temperature controller allows you to accurately adjust the grip temperature. You no longer need to tolerate uncomfortable temperatures.
Elegant, open-end grip design make the heated grip both functional and stylish
Specially-selected rubber material resists outdoor environments and provides a secure and comfortable grip
Suitable for 12V DC application only

User questions & answers

Question:	can I hook these up directly to the controller switch on my Moto Guzzi California 1400 and use that as the controller
Answer:	No. That will not work.
Question:	Do these grips have an off switch
Answer:	It has a temperature selector with 6 positions. Off plus 5 different warming temperatures. The switch has a button that works sequentially, and 5 led indicator. So you have to press the button for the first time for the 1st warming position and continue pressing it for the next ones. The amount of led turned on indicates the temperature level. It also comes with the fuse box. The box is pretty complete, even including the materials to fix the temperature selector box to the handle bar.
Question:	Do these fit fine over the throttle piece? The throttle side on my bike has a plastic piece which this would have to fit over
Answer:	It fit over mine. It was VERY tight and I worried about damaging the grip when I put it on. I tried to slide it on dry and wasn't able to get it on. I then put a very thin coat of dish soap inside the grip and was able to work it on. These grips are great. I won't have another bike without them.
Question:	What is the max current this grip set draws? If I missed that in the specs..my apologies. Thanks
Answer:	my pleasure. for what it's worth i've installed probably 15 sets of these bikemaster grips on various buells and other bikes and for the money they are the best i've ever used. heat regulator very accurate, grips very comfy and well designed and the wiring connections are robust and top quality. draw is from 1.5 amps on low to 3 amps on high. you'll love them if you buy them

Kolpin 50-0360 Hot Thermal Grip

Based on 106 reviews Check latest price

Product description

Keep your hands warm during those cold winter activities - plowing, hunting, fishing and riding your ATV.

Plug & Play connectors
Comfortable rubber grips
Handlebar mounted dial switch
Compatible with vehicle type: all-terrain-vehicles

User questions & answers

Question:	do these fit the VTX 1300 r
Answer:	We put ours on a honda foreman
Question:	will these fit my 2008 Kawasaki ZG1400 Concours
Answer:	Measure the diameter of your handlebars. The following was taken from Koplin website: Easy to install with fully assembled, plug-n-play electrical connectors to any standard ATV or snowmobile with 7/8" handlebars. If you do not have 7/8 inch handlebars they will not fit!
Question:	Do they shut off when the machine is shut off or do you have the remember to hit a switch each time
Answer:	If you wire them direct to the battery you have to shut them off manually with the switch. If you wire them to a spot that is only hot when the key is on they will shut off when you stop the motor.
Question:	How many amps of power do I need
Answer:	The paperwork says " 0.68 amp on low and 2.57 amp on high ". I hope that helps. It has 3amp fuse.

Tusk ATV Lock-On Heated Grips

Based on 15 reviews Check latest price

Product description

The Tusk ATV Lock-On Heated Grips are the perfect accessory for anyone using their ATV in cold weather. This plug and play kit comes with 2 molded comfortable hand grips with locks, adjustable heat controller with 5 modes and an easy to connect wire harness with fuse. When in need of quality parts and accessories for your motorcycle, ATV or UTV think Tusk! -Compatible thumb warmer sold separately (Part# 1251940001).

Simple to use Lock-On heated ATV grips.
Designed for ATVs with thumb throttles; will not work with twist grip throttles.
Inner diameter 7/8".
Easy installation.
Contains 2 locking molded ATV grips, 5 mode heat controller and wire harness.

Heat Demon 215048 Quad Zone ATV Clamp-On Heated Grip Kit, Black

Heat Demon

Based on 122 reviews Check latest price

Product description

The Quad Zone ATV Clamp-On Heated Grip kit was designed to keep your hands and thumbs warm while riding or working in cold weather, with an easy-to-install grip and thumb warmer kit. Our innovative design let's you control the amount of heat you desire with the Quad Zone controller. The controller has multiple mounting options, adjustable LEDs for day or night operation and will shut off automatically after two hours to save your battery life. With the Quad Zone controller, you can power a heated seat, heated vest, or heated boot insole-inserts independently from the grips and thumb warmer. Image is for reference only, actual product may vary.

Fits all ATV makes and models with a 7/8" handlebar
Two heated clamp-on grips and one adhesive-backed silicone thumb warmer
Quad-Zone Controller - select your thumb and grip heat levels separately with additional zones for heated seat, vest, or insole heaters
Maximum 45 watts (20 per grip, 5 per thumb warmer) at 14 volts
Kit includes one zip tie and doesn't include wire taps

User questions & answers

Question:	Are replacement parts available
Answer:	Yes, you can reach out to Heat Demon (Symtec) for replacement parts
Question:	What size handlebars will these fit? I am purchasing a Moose dual gasser and was wondering if this would fit the twist throttle
Answer:	It won't fit with a twist throttle, you would have to get the heat element only.
Question:	Need a defrost for windshield
Answer:	The quad zone kit has 2 extra spots for additional heaters. I don’t see why you couldn’t have a windshield heater if it has the rca style plug in
Question:	Will the quad zone controller fit on the handle bar that has a windshield already attached? if not, where to attach on a grizzly
Answer:	I am not sure. I mounted the controller to my winch toggle switch with the bracket provided. I didn't care for the plastic handle bar mount bracket. I am not sure how much room the windshield restricts the handle bars but I still had plenty of room after mounting to the winch toggle bracket.

Heart Horse Heated Grips Motorcycle, heated grips with USB Switch Control 3 Gear Electric Handlebar Grips for 20-30mm Handle Diameter Motorcycle/Bike/ATV (2 pack)

Based on 30 reviews Check latest price

【Anti-slip, Wear-resistant and Flexible】Anti-slip bump design, increase anti-slip performance, reduce product wear and fix more firmly. The heated motorcycle grips pads fit under your grips without causing any loss of control cause they're flexible and aghesive. Perfectly fit any handle bar, Keep your hands warm in cold weather while riding.
【Strong Applicability】 The Motorcycle Electric Heating Handlebar Covers size is 4.25 inch * 5.63inch, and the USB cable length is 56.69inch. Suitable for electric vehicles and motorcycles with a handle diameter of 20-30MM ect.
【3 Position Switch】You can accurately adjust the grip temperature to make the heated grips work perfectly at different temperatures. (45 ℃ -Red/ 50 ℃-Green/ 55 ℃-Blue) Handlebar hand warmers designed with revolutionary heating structure delivers heat faster than ever and then can heat up faster and warm your hands.
【Can be Washed Repeatedly】The gloves are made of stretchable diving fabric, which can be washed repeatedly when they are dirty. The surface of the product has strong water resistance, and the internal heating element cannot be washed and waterproof.
【Non-destructive installation】Easy to install, just stick on handlebars and then connect this product to your car 5V USB charger or power bank. Atv hand warmers fast to heat within few seconds, perfectly meet all you demands as heated grips.

User questions & answers

Question:	Will this work if I just use one grip heating pad
Answer:	Probably. You just have to wire it correctly for the missing pad.
Question:	Can these be wired to any 12 power source or does the amperage need to at a certain value
Answer:	I have these wired to my 750 Kawasaki Brute Force 4 wheeler with a commercial truck battery so I can run sprayers and other direct draw electric tools and they work fine therefore I think any 12 volt DC electric system would be OK. Good luck.
Question:	what are the dimensions of the pads
Answer:	The heated grip pad size is 4" x 2.6" (L x W), perfect fit handlebars
Question:	Does it goes on top of your regular grip
Answer:	You can put on top but better to have this installed under your grip.

Product features

Advantage

High-end -55℃-Red/ Mid-range -50℃-Green/ Low-end -45℃-Blue
perfectly fit any handle bar, Keep your hands warm in cold weather while riding
Easy to install, just stick on handlebars
USB power supply mode, easier to use
High-strength waterproof: can be washed repeatedly
Three gear switch adjustment: temperature controllable
Anti-slip and wear-resistant
Non-destructive installation

Quadboss Heated Grips

Quadboss

Based on 38 reviews Check latest price

Product description

QuadBoss takes pride in scouring the world for the quality products that you need and want. With QuadBoss, you can pick and choose what works for you.The elegant, open-end grip design makes the heated grip both stylish and functional.The highly efficient

Chances are you're all too familiar with this question: What are you going to do with it? Whether it's your spouse, buddy, the powersport dealer, or even yourself that asked it, the number of answers are nearly limitless.
Your quad doesn't have to look like or perform like every other quad that came rolling off the assembly line.
You can MAKE IT YOURS.
Customize it to your specific needs.
Whatever your answer, QuadBoss is here to help.

User questions & answers

Question:	Has anyone ever tried putting them on a snow thrower? I'm concerned current draw will exceed available power
Answer:	i have done a few and if your blower has 7/8th bars the left will fit but the right will not as it is larger ID for twist grip applications. these only draw about 3 amps max on high so a normal blower alternator has enough power to do the job.
Question:	Will these fit a 1999 polaris
Answer:	if the handlebar or bar ends are 7/8th inch OD they will. and they're easy to wire and work really great. i do recommend you put a little cover or sandwich bag on the controller if you are going to ride in rain all day or thru streams, etc. they don't take well to repeated dousings.
Question:	Are both grips 7/8" or is one of them
Answer:	both grips are the same size (at least mine were?)
Question:	Will this fit on a Honda Rancher
Answer:	If your bars are 7/8 diameter then yes

NTHREEAUTO 7/8'' Handlebar Heated Grips Universal Motorcycle Handle Grip Heaters Compatible with Harley Honda Kawasaki Yamaha Dirt Bike ATV

Check latest price

Product description

Specifications:

Material: Rubber & Plastic

Color: Black

Voltage: 12V

Power: 15-35W Adjustable

Size: 122*32*22MM

Temperature of heating grip: Max. Temperature 35℃, Min. Temperature 75℃

Hole Diameter: 22mm

Fitment:

This warm grips fit for most 12V motorcycle or ATV with 22mm (7/8") diameter handlebar

Package Included:

1 x Pair of Handlebar Heated Grips

NOTE:

1. Please note that the temperature can not be adjusted if the wire connected wrong.

2. Since the electric heating handles use a rubber integral forming process, don‘t over twist the left handle when installation. Doing so will cause the electric heating wires to shift.

3. As to the model with the balancer, the balancer should be spaced out of the handle in order to avoid squeezing the handle when installing the balancer. If the position of the

balancer can’t be adjusted, use a shim between the balancer and handle. Being too close to the handle will lead to abnormal damages, such as making it difficult to toggle the switch, the

electric heating wires squeezed out of the handle and so on.

4. If the left handle slide on the steel tube, apply some glue to the inner bore of the left handle to fix it. Never apply the glue to the steel tube, because doing so will allow the glue to

penetrate into the switch, and make it unable to be toggled. Bear in mind that the glue will be pushed along the bar and may pool if you use too much.

【Compatibility】The heated motorcycle grips universal fit for most 12V motorcycle or ATV with 7/8"(22mm) handlebar.
【Adjustable Temperature】4 temperature mode selection: 35℃, 50℃, 60℃, 75℃. Fast heating, convenient, safe and energy-saving, select the optimum temperature as you need in cold weather conditions. Design with advanced electronic thermostat system, durable and protect the battery.
【High-Temperature Resistance】This grip heaters made of high temperature resistant rubber, waterproof, durable and corrosion-resistant. With anti-skid texture on the handlebar surface, both functional and stylish, provides a secure and comfortable grip touch feeling, safety for driving.
【Easy to Install】Easy installation, no modifications needed, just take off your stock grips and install the new replacement. Easy wiring, red -- positive, black -- negative.
【Buy with Confidence】You will get 1 set heated handle grips. You are backed by 180-Day warranty since the order purchase date. Please feel free to contact us if you have any questions, solutions will be offered regardless of the warranty period.

User questions & answers

Question:	It looks like this comes with a new throttle tube. Can a different one be used
Answer:	Dear friend, we are sorry, it can't
Question:	Is the right hand grip a twist throttle grip? I'm looking for one with out the twist throttle, as I use a thumb throttle
Answer:	Rright handgrip is twist throttle grip

Can-Am New OEM ATV Outlander Heated Hand Grips & Throttle Combo, 715003250

Can-Am

Based on 23 reviews Check latest price

Product description

LED dimmer facilitates reading temperature settings 4 temperature settings with individual controls for thumb and grips Returns to previous heat setting One-touch shutdown

LED dimmer facilitates reading temperature settings.
One-touch shutdown.
4 temperature settings with individual controls for thumb and grips.
Returns to previous heat setting.
Fits: G2, G2L, G2S (except 2020 models equipped with 850 engine, and 2019 & up models with 1000R engine models, 6x6 models, and European vehicles)

User questions & answers

Question:	Will this fit a 2016 can am outlander 850 Max Xt
Answer:	Yes it will
Question:	The description states requires wiring cable (710004567). does this heater come with this cable? i have a can-am g2 fit code
Answer:	I have a G2L model: 2017 Outlander Max 570, so where do you order this cable? I don't see it on Amazon or Ebay, etc.
Question:	Can anyone confirm this will fit a 2020 outlander 650XT
Answer:	Yes it will fit on a 2020 Outlander 650
Question:	Will this fit a 2006 Outlander 800 XT
Answer:	Never bought this item........card was hacked.........

E-Bro New Motorcycle 7/8" 22mm Electric Hand Heated Molded Grips Handle Handlebar

Based on 24 reviews Check latest price

Product description

Specifications:

Color: Black

Power: 12 V

The Highest Temperature: 75℃

The Lowest Temperature:50℃

Material:PVC + Metal

Length: 140mm

Diameter: 22mm / 7/8inch

Fitment: Fit for ATV's with thumb throttles,twist grip throttles

Note: The color of the item may vary slightly due to photography and your own computer

Handle is made of high temperature resistant NBR once forming

Energy-efficient, Ultra-thin electric hand dedicated switch

Advanced electronic thermostat system does not consume power, Helps to protect the battery

Package includes:

1 x Pair of Electric Heated Grips Handlebars

1 x Extended Anti-off Ring

Brand New Electric Heated Grips Handlebar
Corrosion-resistant PVC plastic, heat fast
Easy to install, wide range of application
Third gear switch, high and low temperature adjustable casually , very convenient, safe, energy saving
Extended anti-off circle, in use the handbar refueling door is more safer

User questions & answers

Question:	Are the ends opened or closed on these
Answer:	Closed
Question:	Will these fit 350 honda four wheel
Answer:	Yes - be careful how you put the wiring....
Question:	Will these fit a harley davidson softail
Answer:	They will if the bar is a 7/8" bar. Otherwise Harley also makes a set that will fit and match the bike.
Question:	Will this fit Kawasaki z
Answer:	Probably - but measure the diameter of the bar before you purchase. It is very accurate on the size.

Symtec 215047 Heated Push On Grip and Thumb Kit with 2 Zone Controller

Symtec

Based on 305 reviews Check latest price

Product description

Symtec Heat Demon ATV Winter Pak Dual Zone Heated Grip Kit

package height : 17.018 cm
package length : 5.588 cm
package width : 16.002 cm
Product type : AUTO ACCESSORY

User questions & answers

Question:	I have a 2007 polaris sportsman 700. Will these fit? Also, where does the controller mount and how big is it? Thanks
Answer:	If the handlebar is the same diameter it will fit. Most likely 2007 Sportsman handlebar is the same as my 2010. The controller clamps on to the right side of the handlebar, next to the throttle. It is about the size of a deck of cards.
Question:	Has anyone ordered these from kinney's cycles (through amazon) and is the controller grey as shown in the picture or black like the demon model
Answer:	I sell them in my Amazon store and they are black
Question:	My son races atvs. His fingers freeze due cold and wet conditions...so what happens if these get wet? He drives threw low streams
Answer:	There will not be an issue when they get wet. Ours still work fantastic. Just an fyi that his palms will get warm/hot and the top of his hands may still be cold. Best when paired with something to block the wind.
Question:	does any one know how many amp these use on the hightest setting
Answer:	According to Symtec's site: "Maximum 40 Watts (20 Watts per grip) at 14 Volts"This doesn't appear to include the thumb warmer, which I would assume would be around 10 watts (but that's a guess). If you want to know for certain, I'd suggest calling them at ( 8 8 8 ) 5 7 1 - 9 1 9 3.