10 best buffalo tools motorcycle jacks

• 【STRONG SUPPORT】 - Lift Mechanism: Hydraulic; Lift Capacity: 1500 lb; Working Height Range: 5.12-13.39 inches. The motorcycle lift jack is made of heavy-duty steel. The finish is coated red and oil-resistant.
• 【EASE OF USE】 - Foot paddles activate the motorcycle lift stand. An easy step helps lift or lower the vehicle. You don't have to consider leaning over a bike in an awkward position.
• 【NON-SLIP RUBBER MAT】 - The motorcycle stand lift features rubber coating on it to stop the bike from slipping. Also, it will protect your paintwork from damage.
• 【SECURE FIXATION】 - To ensure your safety when working on the bike, a locking bar will get the scissor lift stuck even though the hydraulic pressure is gone.
• 【GREAT MOBILITY】 - The dirt bike stand is designed with two lockable wheels, allowing you to move it around and position it with ease.

Product features

Stable Structure

The heavy-duty steel and the scissor frame of the motorcycle stand will provide strong support, a maximum lift capacity of 1500 lb, to most bikes and even all-terrain vehicles.

Easy to Use

The dirtbike stand features a lifting pedal and a lowering one controlling the hydraulic pressure. By stepping them, you can easily adjust the height of the vehicle.

Non-Slip Plate

The motorcycle lift has a rubber padding on its top that ensures the bike's secure grip and protection for the paintwork on its finish.

Safe Locking Bar

The hydraulic lift has three possible locking positions where the locking bar should be stuck. It will keep the frame still in case the pressure is somehow released.

Fastening Hook

The motorcycle jack is designed with two buckles in the front and at the back where a fastening strap (not included in the package) can be placed.

Lockable Casters

The two front wheels of the motorcycle scissor jack are lockable. So they allow you to move your workplace and settle it down when you start working.

Motorcycle Scissor Jack

Maintenance of your bike is an important part of owning it. The motorcycle jack, whose working height range is 5.12-13.39 inches, will save you many hassles and a lot of aches and pains. Meanwhile, the non-slip padding, a locking bar, and fastening straps ensure your safety during work.

Product description

Features:

1. Suitable for street bikes, cruisers and adventure travel, not suitable for off-road vehicles, ATV & UTV and snowmobiles.

2. The large platform can cover larger area, can easily span the gap between the frame slide rails, or can reach more abdominal areas.

3. Heavy-duty steel is the main component of jack construction, can prevent bending, breaking and warping to keep it consistent.

4. Park the motorcycle, slide the jack into the lower position, and then lift it up.

5. The top surface is designed with a durable rubber pad with striped veins to help prevent slipping and scratching.

6. Heavy-duty solid steel structure, maximum load-bearing 1100LBS.

Specification:

Material: steel

Adjustable height: yes

Color: red

Function: manual hank crank

Product size: about 14.6 inches x 9 inches x 4.5 inches (37 x 22.9 x 11.4 cm) (length x width x height)

Platform size: about 14.6 inches x 9 inches (37 x 22.9cm)

Minimum height: about 3.25 inches (8.3cm)

Maximum height: about 13.25 inches (33.7cm)

Bearing weight: about 1100 pounds

Packing List:

1*Lifts

• ✔【Strong Load-bearing Capacity】: Heavy-duty solid steel structure, maximum load-bearing 1100LBS.✔Usually arrive in 6-11 days.
• ✔【Wide Application】: Suitable for street bikes, cruisers and adventure travel, not suitable for off-road vehicles, ATV&UTV and snowmobiles.✔
• ✔【Anti-slip and Scratch-resistant】: The top surface is designed with a durable rubber pad with striped veins to help prevent slipping and scratching.✔
• ✔【Heavy-duty Steel Material】: Heavy-duty steel is the main component of the jack structure, which can prevent bending, breaking and warping and keep it consistent.✔
• ✔【How to Use】: When parking the motorcycle, slide the jack into the lower position and then lift it up.✔

• 【STRONG SUPPORT】 - Lift Mechanism: Hydraulic; Lift Capacity: 300 lb; Working Height Range: 13.78-34.25 inches. The motorcycle lift jack is made of heavy-duty steel. The finish is coated blue, and oil-resistant.
• 【EASE OF USE】 - Foot paddles activate the motorcycle lift stand. An easy step helps lift or lower the vehicle. You don't have to consider leaning over a bike in an awkward position.
• 【NON-SLIP RUBBER MAT】 - The motorcycle stand lift features rubber coating on it to stop the bike from slipping. Also, it will protect your paintwork from damage.
• 【SECURE FIXATION】 - To ensure your safety when you are working on the bike, a locking bar will get the scissor lift stuck even though the hydraulic pressure is gone.
• 【GREAT MOBILITY】 - The dirt bike stand is designed with two lockable wheels, allowing you to move it around and position it with ease.

User questions & answers

Question:	If this is rated for only 300lbs. I can tell you the street bike in the picture is over 300lbs. So what’s the truth
Answer:	It’s safe up to 300lbs..

Product features

Stable Structure

The heavy-duty steel and the scissor frame of the motorcycle stand will provide strong support, a maximum lift capacity of 300 lb, to your bike.

Easy to Use

The dirtbike stand features a lifting pedal and a lowering one controlling the hydraulic pressure. By stepping them, you can easily adjust the height of the vehicle.

Non-Slip Plate

The motorcycle lift has a rubber padding on its top that ensures the bike's secure grip and protection for the paintwork on its finish.

Safe Locking Bar

The hydraulic lift has several holes drilled on its sides where the locking bar should be placed. It will keep the frame still in case the pressure is somehow released.

Fastening Strap

The motorcycle jack will come with fastening straps used to tie your motorcycle and hook the buckle on the sides to give additional stability.

Lockable Casters

The two front wheels of the motorcycle scissor jack are lockable. So they allow you to move your workplace and settle it down when you start working.

Motorcycle Scissor Jack

Maintenance of your bike is an important part of owning it. The motorcycle jack whose working height range is 13.78-34.25 inches will save you a lot of hassle and a lot of aches and pains. Meanwhile, the non-slip padding, a locking bar, and fastening straps ensure your safety during work.

• 【STRONG SUPPORT】 - Lift Mechanism: Hydraulic; Lift Capacity: 1700 lb; Working Height Range: 5.51-13.78 inches. The motorcycle lift jack is made of heavy-duty steel. The finish is coated red and black, and oil-resistant.
• 【EASE OF USE】 - Foot paddles activate the motorcycle lift stand. An easy step helps lift or lower the vehicle. You don't have to consider leaning over a bike in an awkward position.
• 【NON-SLIP RUBBER MAT】 - The motorcycle stand lift features rubber coating on it to stop the bike from slipping. Also, it will protect your paintwork from damage.
• 【SECURE FIXATION】 - To ensure your safety when you are working on the bike, a locking bar will get the scissor lift stuck even though the hydraulic pressure is gone.
• 【GREAT MOBILITY】 - The dirt bike stand is designed with two lockable wheels, allowing you to move it around and position it with ease.

Product features

Stable Structure

The heavy-duty steel and the scissor frame of the motorcycle stand will provide strong support, a maximum lift capacity of 1700 lb, to most bikes and even all-terrain vehicles.

Easy to Use

The dirtbike stand features a lifting pedal and a lowering one controlling the hydraulic pressure. By stepping them, you can easily adjust the height of the vehicle.

Non-Slip Plate

The motorcycle lift has a rubber padding on its top that ensures the bike's secure grip and protection for the paintwork on its finish.

Safe Locking Bar

The hydraulic lift has three possible locking positions where the locking bar should be stuck. It will keep the frame still in case the pressure is somehow released.

Fastening Hook

The motorcycle jack is designed with two buckles in the front and at the back where a fastening strap (not included in the package) can be placed.

Lockable Casters

The two front wheels of the motorcycle scissor jack are lockable. So they allow you to move your workplace and settle it down when you start working.

Motorcycle Scissor Jack

Maintenance of your bike is an important part of owning it. The motorcycle jack whose working height range is 5.51-13.78 inches will save you a lot of hassle and a lot of aches and pains. Meanwhile, the non-slip padding, a locking bar, and fastening straps ensure your safety during work.

Product description

The Tirox Snapjack V2 is a lightweight (1.5lb) compact motorcycle jack that is easily portable and fits in most saddle bags.

-Allows you to raise the rear tire off the ground to spin the tire for easier chain cleaning/lubricating/adjustments and tire/rim cleaning.

-The adjustable build allows it to work for most bikes other than cruisers.

-Includes the Jack, 2 Anti Skid Rubber Pads, Break Locking Strap, and an EVA Case.

-Works best on non-smooth surface.

-Base and cradle pivot to help accommodate for different angles of the rear swing arm and ground.

• Lifts Rear Wheel For Easier Chain And Tire Maintenance
• Compact And Fits In Most Saddle Bags
• Works With Most Bikes Other Than Cruisers
• Cradle And Base Pivot To Accommodate For Different Angles
• Includes Anti Skid Rubber Pads And A Break Locking Strap

Product description

The center-lift design of the Extreme Max Wide Motorcycle Scissor Jack is perfect for most motorcycle maintenance needs. Equipped with an optional dolly tray for easier mobility, the jack lifts to an extended reach of 14-1/4” while the 15-1/8” x 9” platform holds your bike with a rubber padding that prevents scratching and adds stability. The jack is operated manually by using a 7/8” socket or wrench (sold separately). Measurements with dolly: Extended height: 14-1/4”; Collapsed height: 4-1/4”; Base: 15-1/2” x 16-1/2”; Lifting platform: 15-1/8” x 9”; Measurements without dolly: Extended height: 14”; Collapsed height: 3-3/8”; Base: 15-1/8” x 9”; Lifting platform: 15-1/8” x 9”. *Do not use an impact-style wrench to raise or lower the jack.

• Extends up to 14. 25" height
• Easily hand-operated using 7/8" socket or wrench (sold separately) - *Do not use an impact wrench or powered drill to operate the lift
• Durable rubber padding on platform
• Dolly tray provides easier mobility
• 1100 lbs. weight capacity; will not lift trikes

User questions & answers

Question:	Will this allow me to remove my rear wheel on a Honda Shadow Spirit
Answer:	Sorry, I did not purchase the dolly with the stand.
Question:	Will this work for a 2013 harley davidson road king
Answer:	Dear Customer, Thank you for your question. It is the 22mm diameter hexagon bolt. Please do not hesitate to contact us if you have any other questions. Best wishes, VIVOHOME Customer Care
Question:	Will this work for a 2008 Goldwing
Answer:	I just measured mine: 3 9/16". Get a buddy to lift the Harley just a tad and you should be able to get this under it. There's also a rubber no-slide pad on the bottom. You could maybe pull that off to gain a bit. Or put a bit more air in the tires.
Question:	Does it roll well? And is it stable when on the dolly? Looking to use it for storage and maintenance
Answer:	Dear Valued Customer, Thank you for asking. The maximum lift height is 14.5 Inch. For any other question or inquiry, please feel free to contact us via Amazon's direct messaging service We will provide you with a satisfaction-guaranteed solution within 24 hours. Best wishes, VIVOHOME Customer Care

Product features

Extreme Max Wide Motorcycle Scissor Jack with Dolly

When it's time to get your motorcycle's wheels off the ground for maintenance or cleaning, look no further than the Extreme Max Wide Motorcycle Scissor Jack! Specifically designed to be one of the strongest and most stable scissor jacks available, the high strength worm drive and heavy-duty steel construction pair together to lift nearly any road bike, touring bike, or cruiser up to 1,100 lbs. Included the jack is a durable dolly designed to fit the exact measurements of the jack's base, allowing an unprecedented mobility while positioning the jack underneath your motorcycle.

The lift is operated manually by using a wrench on the 7/8" worm drive. Do not use an impact wrench or powered drill to operate the lift.

Strength

When lifting your motorcycle, you want something strong, something you can rely on time and time again. That's why our engineers put in the effort to create a scissor jack with unparalleled strength and ease-of-use. Heavy-duty steel is the main component in the construction of the jack, preventing bending, breaking, and warping – keeping it consistent from it's first use through it's 100,000th use.

Stability

Stability shouldn't be a question when you're lifting anything, especially something as precious as your motorcycle. Designed with this in mind, the wide platform covers a large area, easily spanning gaps between frame rails or contacting more surface area on belly pans. The more flat surface you contact, the more stable the motorcycle. Textured rubber padding prevents any metal on metal contact, protecting your ride from scratching, scuffing and scraping.

Slim Fit

What good would a jack be if it couldn't fit under your ride? Many low riders and cruisers offer extremely low ground clearance, making it impossible to use a center-lift jack. However, with a fully-collapsed height of just 4.25", this should never be a problem! Park your motorcycle, slide your jack into position underneath, then lift away!

Reach

Starting at the fully-collapsed height of 4.25", the Extreme Max Wide Motorcycle Jack offers a tremendous 10" vertical travel, topping out at a fully-extended height of 14.5". This height provides plenty of clearance for tire changes, drive chain maintenance, cleanings, tune-ups, and more. While extended, the worm drive acts as a brake, holding the jack at the height you set without needing any clumsy locking bars or brake levers.

Also Available from Extreme Max:

Extreme Max 5001.5044 Motorcycle Scissor Jack

Don't need a dolly? Don't get the dolly. Also available from Extreme Max, the Wide Motorcycle Scissor Jack features the exact same jack without the dolly included. The same effort and quality have gone into this jack, leaving you with the bare-bones, industry-proven 1,100 lbs. scissor jack you crave.

• COMPACT HALF-TON JACK: This powerful little motorcycle lift by Orion Motor Tech easily jacks up and lowers your standard, cruiser, touring, or sport bike up to 1100 pounds with no more assembly required than fitting in the easy-to-use T-handle
• HIGHLY STABLE: Our center stand's 15x9 inch platform holds your vehicle firmly thanks to rubber padding that prevents slips or turn-overs; the wide threading on the central shaft also keeps things nice and steady going up or coming down
• SLIM-FIT DESIGN: The 3.7-inch minimum height on this compact bike jack slips right under any motorcycle, even those with sunken chassis; the 13.8-inch maximum height still gives you plenty of room for working on your vehicle's undercarriage
• RUGGED CONSTRUCTION: Our scissor jack offers long term performance under even punishing use thanks to its heavy-duty steel engineered for large payloads and powder coating for superior corrosion resistance
• SATISFACTION GUARANTEED: OMT backs this motorcycle center stand with our usual strong warranty and friendly 24/7 customer service, ensuring that it will serve you well for years to come!

Product features

Orion Motor Tech Motorcycle Scissor Jack Stand

• Solid alloy steel construction in black powder coated finish which is for oil-resistant, grease-resiatant and dirt-resistant. Galvanized treatment accessories to prevent rust. 3" wing design on each side of base strengthens and stabilizes.
• Come with 2 screw adapters for variable height adjustment. Easy and flexible.
• Attached with a free Galvanized Crank Handle which is very easy to operate. Just rotating the metal sleeve to lift your motorcycle easily, a really excellent helper for motorcycle repair.
• The lift fits most motorcycle models including cruiser, street bike, adventure touring, etc.
• Lift range(With detachable saddle): 6.88'' to 20.65''. Platform dimensions: 17.7'' x 5.9''. Weight Capacity: 1200 lbs.

User questions & answers

Question:	What are the dimensions of the top platform
Answer:	17.7 in x 5.9 in.
Question:	Will this work on HD Ultra
Answer:	Yes, I have one and it works on it very well.
Question:	Does it shake during use
Answer:	No, it doesn’t shake. You need to find the balance point when putting your motorcycle on.
Question:	What is the lowest height
Answer:	6.88''.

Product features

Donext 1200LB Motorcycle Center Scissor Lift Jack

Designed for motorcycle maintainance. Made from sturdy materials, super heavy duty. Suitable for most motorcycle models including cruiser bikes, street bikes, adventure touring motorcycles, etc. Very easy to use. It can reduce your workload and ensure your safety.

Removable Handle

Quickly adjust the height with this easy-to-use handle.

Reinforced Lifting Arms

Sturdy lifting arms provide stronger support.

Safety Pin

Six-position safety locking system enhances safety during use.

Product description

Ideal for bikes with higher suspension.

• Capacity: 1100 lbs (500kgs)
• 2 screw adapters for variable height adjustment
• Lifting Range: 3.5"( 90mm) to 15 3/4"(400mm) without 2 saddles and adapters
• Simple crank operated jack
• Safety Pin with 6 locking positions to prevent accidental drops

User questions & answers

Question:	Where can you get parts at for lift my showed up and lift screw stripef out
Answer:	How do you contact lift master? phone number? need a bearing for my lift.
Question:	What are the jack dimensions? Length width and how low it seats with saddle
Answer:	As advertised
Question:	Just had this lift fail and almost cost me a hand. How do we contact for warranty. Not even 6 months old
Answer:	If you still have the paperwork for the lift, refer to the instructions. Not sure how much you were trying to lift, but I've NEAR MAXED mine out, and it still worked perfectly. You might have a factory defect..? If you don't have the paperwork.......contact Amazon. They are great, and will help you with your return/replacement.
Question:	what is the collapsed height (minimum height
Answer:	Collapsed height is 4 inches.

Product description

Are you looking for a reliable dirt bike stand to take with you on the go?

Are you tired of heavy, unreliable wobbly bike stands?

Pit Posse's bike stand is the right choice for you!

Why choose our bike stand lift jack??

?Foot lever is made from 6061 heavy duty extruded aluminum

?Two heights: Low- 11"-15", and high: 12"-17"

?Sturdy aluminum reinforced construction

?Colorful design available in silver, black, blue, red, and orange

?Wide feet surface for stability and workability

?Extra thick oil & gas resistant rubber pad

?5 Year warranty backed up by Pit Posse's 20 Years of excellent service

?Foot activated release trigger and a wide stable base

Your search is complete, our bike stand will allow you to service your bike efficiently on the go and carry anywhere. Easily lift your bike anywhere!

ADD TO CART TODAY, RISK-FREE! ENJOY 5 YEARS OF MANUFACTURE WARRANTY!

• ✅ UNIVERSAL OFF-ROAD BIKE STAND IDEAL FOR ON THE GO- Pit Posse's universal bike stand is a small stand you can easily take with you in your enclosed trailer or van. Use on the go for oil changes, checkups, and preparation. The stand will make it easier to apply chain lube or grease after washing your bike.
• ✅SAFE AND CONTROLLED BIKE LIFTING FOR EASE OF USE- Pit Posse's motorcycle stand easily lifts your bike by stepping on the lift lever. The stand has a foot activated release trigger and a wide stable base, you can customize the height of the stand by choosing one of the two heights from the floor: Low- 11"-15", and high: 12"-17". The fully adjustable deck height makes this stand a perfect fit for most bikes.
• ✅ STRONG ALUMINUM CONSTRUCTION FOR DURABILITY- Pit Posse's off-road bike stand is made of heavy-duty aluminum, and the foot lever is made from 6061 heavy duty extruded aluminum which gives this stand exceptional stability and durability. This stand is not flimsy, or wobbly, it's sturdy and reliable for your everyday use. No more struggling to get the bike up on a fixed lift.
• ✅ PERFECT FOR MAINTENANCE WORK AND OIL CHANGE- The bike stand will lift the bike off the ground and onto the reinforceable top that's made of extra thick oil & gas resistant rubber. The pad will keep your bike in place and allow for easy maintenance, repair, cleaning, and prevent bike slippage. This bike master stand lifts the whole bike without effort, so easy and quick, making your job easier.
• ✅ YOUR SATISFACTION IS OUR # 1 PRIORITY- Pit Posse takes pride in offering accessories, gear and maintenance tools for the everyday biker and mechanic. We know you're going to love this MX bike stand. If you're not 100% satisfied we will give you a full refund or a free exchange, no questions asked. We offer a 5-year warranty, contact us directly, and we will gladly assist.

User questions & answers

Question:	YZ 85 has 12" bottom height,will this work for it
Answer:	The stand is 12 3/4" in the down position.
Question:	This product came up as suitable for my Road King. With a list capacity rating of just 330 lbs. could it safely raise my 775 lb. bike
Answer:	I would say no it works fine for my grandsons dirt bike. While it would probably lift your bike I seriously doubt if the base is wide enough to safely balance a Road King.
Question:	What are the dimensions of the deck (the part that the bike rests on
Answer:	The rubber pad on top is 5 1/2 x 9 3/4
Question:	Can it support a Kawasaki 250 dirt bike
Answer:	Easily......