10 best ac electric winches

Product description

The KAC1500 is Ideal for garage and workshop applications. It is packed with features essential for efficient and reliable operation.

1.0 HP 120V AC motor

Automatic full load holding brake

42’L x 3/16” diameter galvanized wire rope and hook with safety latch

3-stage planetary gear box with case hardened gears

Base plate with 4-way roller fairlead and cable tension plate

Handheld wired remote 12’ lead with resettable circuit breaker and resettable emergency stop switch

ETL approved for US and Canada

Plugs into any 110/120V AC 3-prong grounded GFI supported outlet

3-prong plug on 8' lead

Power In / Power Out operation

1,500 lbs. of pulling power (single line rated)

Full load capacity at less than 10 amps AC

• AC powered, ideal for workshop or garage Use
• Base plate with 4-way roller fairlead and cable tension plate included
• Quick change brush caps
• ETL approved for US and Canada, plugs into any 110/120v ac 3-prong GFI supported outlet
• 12' wired remote with emergency shut-off and thermal overload reset

User questions & answers

Question:	can this free spool? does it have a neutral
Answer:	yes it should
Question:	Does this lock or have a brake? Can it be used to hoist kayaks and trust it to hold them at ceiling height
Answer:	It holds very well. I use this as a hoist in my shop to lift items up and also down in a loft-storage area that I have. A kayak would be no problem for this hoist!
Question:	does this unit engage power while pulling the line in as well as when letting the line out
Answer:	Power In / Power Out operation
Question:	How long is the cable
Answer:	the controller is about 10 - 12 feet, the pull cable is 20' or 30', the battery cable is about 15'

Product features

Choose the Keeper winch that is right for you

The KWSL2000RM (rapid mount) is packed with features essential for efficient and reliable portable and marine operation.

Choose the Keeper winch that is right for you

The KW7.5RM (rapid mount) is packed with features essential for efficient and reliable portable operation.

Choose the Keeper winch that is right for you

The KW9.5 is ideal for recovery and heavy duty trailer applications.

Choose the Keeper winch that is right for you

The KW17.5 is ideal for the heaviest loads and packed with features essential for efficient and reliable operation.

Product description

Telecontrol F21-2S industrial nice radio remote control AC/DC universal wireless control for crane 1 transmitter and 1 receiver

A. Transmitter (Handheld)

1. Shell: reinforced nylon, Weight: about 200 grams

2. Protection grade: IP64

3. Frequency range: UHF 430 ~ 440MHz, Transmitting power: ≤10dBm

4. Battery: 2 alkaline batteries AA (AA), the battery is not in the package because of transport restrictions

5. Security code: 32 (4.3 billion group of unique identifier)

6. Ambient temperature: -35ºC ~ +80 ° C (regardless of the battery temperature)

B. Receiver (installed next to the crane)

1. Shell: reinforced nylon, Weight: about 870 grams

2. Protection class: IP65

3. Frequency range: UHF 430 ~ 440MHz, Receiving sensitivity: -110dBm

4. Security code: 32 (4.3 billion group of unique identifier)

5. Ambient temperature: -35ºC ~ + 80 ° C

6. Receiver power: AC110V / AC220V / AC380V / AC36V/ DC24V (according to customer requirements)

7. Control contact capacity: 5 amperes fully sealed relay (using AC 250V / 5A fuse)

C. Features:

1. The electric hoist crane switch with emergency stop function, plus two direction function keys.

2. Industrial lift controller has a strong voltage self-test function, when the transmitter voltage is less than 2.2V when the transmitter is slowly flashing red light tips, the voltage is less than 1.8V transmitter can not work.

3. The transmitters designed with key Up / Down, which can be set to normal, No jump, whether to suppress each other.

• This industrial remote controller includes 1piece transmitter and 1 piece receptor with high sensitivity, good accuracy, effective distance, signal persistence for a long time.
• More kinds of voltage of the wireless hoist switches for options: AC110V,AC220V,AC380V,AC36V,DC24V
• Control distance of hoist crane: 100 meters, and the transmitter and receiver for one-to-one encoding, has strong anti-interference ability.
• Lift transmitter is designed with 4 functions, including up, down, stop and start, can be set to normal, no jump.
• The appearance of the remote controller is made of glass fiber reinforced nylon material, has a strong acid corrosion, high and low temperature and water and dust resistance.

User questions & answers

Question:	can you have two side by side by side on different hoists
Answer:	Yes we have 10 in our shop they have different channels and were cheaper then buying new pendants.
Question:	anything else required to make this work
Answer:	It need two pieces of Battery. Please open the back cover of the remote control.
Question:	Hi is this something that can possibly be hooked up to a dumping trailer
Answer:	I think relays would be needed
Question:	Is this controller compatible with Pittsburg Automotive hoists
Answer:	I have two of these remotes and they work good so far. I use the on hoists from harbor freight, they are both Pittsburg hoists. I had to figure out how to wire them, my hoists only had 4 wires and the remote comes with 6 and the wire diagram that comes with the hoist is no help.
Question:	Will this fit tippmann tmc
Answer:	TMC doesn't have a 98 feedneck so no. Kinda would defeat the purpose of buying a magfed marker though...……… Internally a TMC is about identical to a 98 custom so if you want something cheap with the consistent feed of a cyclone hopper a 98 would be the way to go or just buy an A5/X7. They come with the cyclone built in.
Question:	will this fit a 68 carbine
Answer:	No this will not fit onto a 68 Carbine.
Question:	Would this fit a tippman cronus
Answer:	No, this product will not fit the Tippmann Cronus.
Question:	does this come with hopper
Answer:	Yes, this includes the Tippmann 200 Round Low Profile Hopper. Be sure to select Paintball Discounters as your Amazon fulfillment partner.

Product description

You think up the task and the WARN PullzAll can help you get more done in less time with less effort. Great for construction, pipe fitting, iron work, equipment/plant maintenance, auto shops, garages, and machine shops. Also ideal for farm and ranch use, home improvement, hunting, camping and more. Designed to move heavy machinery, hoist an engine block, or lift a load precisely into place, then nail it, weld it, and get the job done. The PullzAll has a variable-speed control trigger with a forward and reverse control button allowing for exact movements. At 15 lbs., PullzAll is easy to use and portable. Wire rope measures 15' of 7/32" and includes a swiveling anchor hook for a secure hold. An LED load indicator provides user feedback during lifting/pulling, and an electronic load limiter prevents overloading. Also available in a cordless model: WARN 885005.

• Manufactured in China
• Easy to use
• Highly durable
• Always remove any element or obstacle that may interfere with safe operation of the pulling tool
• No load line speed: 13.8 fpm
• Lifts or pulls up to 1,000 pounds
• Replaces old fashioned come-a-longs and chain falls

User questions & answers

Question:	can it spool a standard 50 feet cable if I install it, 15 ' is not enough for me
Answer:	I've never seen it damage a surface, although I suppose it could, since it contains distillates (like toluene?) that might dissolve some materials. More importantly, this stuff is VERY sticky, so on a rough surface you would never be able to completely remove it. For that matter once it gets a good grip, it's about impossible to pull apart anyway. For example, I glued just the red plastic cover from a small reflector (with no backing) to the rear of the seat post on my bike -- just for fun, and extra safety. I put one blob on each side where the reflector touched the post, and masking taped the reflector in place till the glue dried. Years later when I replaced the seat and had to pull off the reflector, first it hadn't fallen off in the meantime, and second it was nearly impossible to get loose, then I had to work at remaining blobs of glue, stuck to chromed steel, with needle nose pliers, to yank them off the metal.
Question:	Watched your video, looks great. Why don't you show the 110v power supply running across the pasture where you are installing the fence
Answer:	Yes, I had good luck doing that with this. It's good at bonding surfaces that are different. I'd use rubbing alcohol on the surfaces first to clean them.
Question:	What Amperage (amps) is this rated at
Answer:	Yes it's great stuff
Question:	How accurate can a person be with stopping a load at the correct height and/or lowering of a load
Answer:	Q-Bond is a two-part system utilizes liquid glue combined with powders to create reinforcing and filling capabilities that allows breaks, cracks, holes and gaps in plastics and metals to be repaired to regain original shape on a wide range of items. Use to fix fuse boxes, distributor caps, lugs and clips, waterpumps and casing, electronic devices and components, speedometers, kitchenware, toys and more. Can be ground down, filed, sanded, tapped and painted. Hardens once adhesive touches powder. Contains two 10ml adhesives, one 20g black filling powder and one 20g grey filling powder. Resistant up to 356 degrees, 1300 psi, 100% chemical resistant, works on all materials except polyethylene and polypropylene plastics, stainless steel, and silicone rubbers.

Product features

Warn Corded and Cordless PullzAll electric pulling tools

The Warn Red PullzAll is the latest addition to the Warn portable utility winch lineup. The Red PullzAll is a powerful lifting and pulling tool and is available in both corded and cordless models. Powered by a 120 volt AC power source, this compact tool has a pulling capacity of 1000 pounds (454 kilogram). The unit has an electronic load limiter with LED indicator, and a variable speed trigger for power in and power-out operation. The unit is also equipped with a versatile swivel anchor hook, 15 feet (4.6 meter) of durable wire rope, and an industrial-grade front hook. When work takes you to more remote locations, bring the mechanical muscle of the portable, cordless PullzAll with you. From tough tasks like pulling pipe to stretching wire fence, you'll come to count on PullzAll to get the job done quickly and effortlessly.

The PullzAll will help get the job done easier, faster, and with less manual labor than a come-a-long or chain fall, making workers more productive. The Red PullzAll is great for pulling big game out of the field, hoisting gear up into a deer stand, and pulling an ATV up into a truck bed. It’s also great for the tradesperson, farmer/rancher, or anyone that needs to lift or pull up to 1,000 pounds It can be used for construction, pipe fitting, iron work, equipment and plant maintenance, farm and ranch use, auto shops, garages, machine shops, home improvement, and more. Applications could include lifting an I-beam and holding it in place for welding, pulling heavy machinery at the plant, pulling fence in the field, or lifting an engine out of a vehicle. Plus, the PullzAll is lightweight so you can take it to your cabin, your hunting locations, or jobsites.

This PullzAll model features a 110V AC power cord, perfect for use in shops or anywhere power is available.

The Red PullzAll, like all PullzAll tools, have features such as the ability to change from forward to reverse motion at the push of a button to allow for easy positioning, and a brake that’ll securely hold your item in place where you want it. You’ll work with confidence because the PullzAll also has an electronic load limiter with LED indicator that provides feedback during the lifting or pulling process.

Operating the PullzAll is simple. First, secure the tool using the swiveling anchor hook. Next, power out up to 15 feet of strong 7/32 inches wire rope and rig it to the item you want to move using the industrial- grade rigging hook. Press the directional switch into to the desired position, and squeeze the trigger to begin movement and to control line speed.

Available accessories

The PullzAll winch sling is constructed of high grade nylon and can lift loads up to 1,000 pounds and is the perfect compliment to your Warn PullzAll. The winch sling makes lifting large and bulky items a breeze.

Available accessories

The Warn PullzAll Rigging Kit includes two 1 inch x 48 feet rigging straps, rated to 5,000 pounds and two D shackles, 1,000 pounds capacity, all in a durable carry bag. The bag holds not only the rigging kit contents but also the PullzAll and its accessories as well. The right tools and space you need to have everything in one convenient portable location.

Available accessories

Replacement steel rope for the Warn PullzAll. Constructed of steel wire rope, galvanized to help resist corrosion and has a swag loop at one end. This is a replacement rope for the Warn PullzAll. Measures 15 feet by 7/32 inches and includes new hawse fairlead.

Available accessories

The Warn PullzAll Car Charger is designed for use with the cordless PullzAll electric pulling tool. Plugs into the accessory or cigarette lighter of the automobile and will charge the 24 volt NiMH battery. Never run out of power again when you're out in the field.

Product description

120 volt AC winches are perfect for indoor or fixed applications, with access to a power outlet. Potential uses includes: shop cranes, boat lifts, boat davits, light towers, ventilation systems, dumb waiters, opening and closing of large horizontal sliding doors.

All D-L StrongArm; electric winches are built for multipurpose hauling and pulling operations. They are not to be used as hoists for lifting, supporting, or transporting people, or for handling loads over areas where people could be present.

• 2700 pounds (dead weight) single line load capacity
• Double line operation (using pulley block and second hook) increases capacity to 4000 pounds
• Factory installed remote control with 10 foot cord
• Includes 7/32 inch x 50 feet aircraft cable and hook, plus pulley block and hook, installed and ready to use
• 3 minute run time requires 15 minute cool down

User questions & answers

Question:	Can this be mounted to a davit arm
Answer:	I mounted mine to Hewlett cantilever boatlift. I removed all the gears and chain for the interior and cut a hole in the center cabinet and mounted the winch to the back wall with four hardened bolts Cable was fastened just like the original. I've had no issues for over three years.
Question:	Is there an adapter with a hook on the back so I could easily attach this to a tree sling, or a chain
Answer:	Yes. There is. Thanks
Question:	Can this be mounted to a davit arm
Answer:	Per the manufacturer, the winch is able to be mounted on a davit arm. The model number SA12015AC is not recommended to be used in this type of application.
Question:	Is there an adapter to convert a 12vdc wench to 120vdc
Answer:	Thanks for your question, but no- we do not offer an adaptor to convert a 12 volt winch to a 120 volt winch, and we do not recommend that you install any parts, accessories, or adaptors not made by us on a StrongArm winch.

Product description

Cable assembly and base are sold separately. Lightweight and easily portable, the new COMPOZITE Davit Crane by OZ Lifting is bringing new technology and safe lifting together. This synergistic blend of strong lightweight composite materials and durable steel components is available now. Current all metal davit cranes are advertised as being portable even though they weigh around 150lbs (1,000lbs capacity models). By utilizing advanced fiber reinforced composite materials this new COMPOZITE davit crane weighs about half that of an all metal davit crane. The new COMPOZITE davit is truly portable. The COMPOZITE davit crane can also be disassembled in seconds without any tools. By breaking the COMPOZITE davit crane into even smaller pieces it becomes even more versatile and portable. Assembly is equally quick and can be accomplished by one person, making transporting the crane from site to site or even taking it up to an elevated structure an easy process.

• Price For: Each

Product description

Cable assembly and base are sold separately. The OZ Lifting Products Davit 1000 is our all steel davit crane with a 1000lb. capacity. The Davit 1000 is portable and has a zinc plated finish to prevent corrosion. It can rotate 360 degrees and features four different boom height adjustments for added versatility. Each Davit 1000 includes a manual DIN rated CE winch with brake and a drill drive adapter, but AC & DC winch options are available. Each Davit 1000 is individually tested and includes a test certificate. Cable assemblies, pedestal and socket bases sold separately. Lightweight and easily portable, the new COMPOZITE Davit Crane by OZ Lifting is bringing new technology and safe lifting together. This synergistic blend of strong lightweight composite materials and durable steel components is available now. Current all metal davit cranes are advertised as being portable even though they weigh around 150lbs (1,000lbs capacity models). By utilizing advanced fiber reinforced composite materials this new COMPOZITE davit crane weighs about half that of an all metal davit crane. The new COMPOZITE davit is truly portable. The COMPOZITE davit crane can also be disassembled in seconds without any tools. By breaking the COMPOZITE davit crane into even smaller pieces it becomes even more versatile and portable. Assembly is equally quick and can be accomplished by one person, making transporting the crane from site to site or even taking it up to an elevated structure an easy process.

• Davit Cranes
• Cranes and Festoon Equipment
• Material Handling
• HOIST/WINCH/RIGGING

User questions & answers

Question:	Cable assemblies, pedestal and socket bases sold separately. I find this odd. How much for the components that should be included
Answer:	The belt is made right in China to stringent standards and designed to perform as well as it looks. BTW it’s the ONLY belt on the market that proves its load rating via testing. It also features a Lifetime Replacment Warranty. Try that with the other guys! Not to mention EZ DIP is the worlds ONLY dumbbell dip belt. Nuff said and good Lifting! TEAM HYPER

Product description

120 volt AC winches are perfect for indoor or fixed applications, with access to a power outlet. Potential uses includes: shop cranes, boat lifts, boat davits, light towers, ventilation systems, dumb waiters, opening and closing of large horizontal sliding doors.

All D-L StrongArm; electric winches are built for multipurpose hauling and pulling operations. They are not to be used as hoists for lifting, supporting, or transporting people, or for handling loads over areas where people could be present.

• 1200 pounds (dead weight) load capacity
• Factory installed remote control with 10 foot cord
• Includes 3/16 inch x 20 feet aircraft cable and hook, installed and ready to use
• 10 foot, 3-wire grounded power cord
• 3 minute run time requires 15 minute cool down

User questions & answers

Question:	Can it be ordered with 40’ of cable
Answer:	This is not available with 40' of cable. A similar model with 50' of cable is model SA7015AC.
Question:	Can the clutch be removed
Answer:	The clutch should not be removed.
Question:	Can yo upgrade to a 50 ft cable in this model
Answer:	Thanks for your question! If you need 50' of cable on a winch the size and weight capacity of a SA5015AC, you should purchase a SA7015AC- https://www.dutton-lainson.com/proddetail.php?prod=25727. SA7015ACs are identical to SA5015ACs except that it has 50' of cable installed on it (instead of the 25' installed on SA5015ACs) and a pulley block and hook installed on the cable to allow you to double-line the cable if desired. Watch the "What's the Difference Between StrongArm Electric Winch Models?" video on this product page for more information on this topic.
Question:	how many amps does the 110v 1200lbs unit draw when under full load
Answer:	Thanks for your question! All StrongArm AC electric winches, including this SA5015AC, draw 8 amps under full load.

Product description

Wherever there is a wall socket, you can now pull or drag just about anything anywhere with the versatile WARN 1000AC Utility Winch. The 1000AC winch delivers 1,000 lbs. of pulling capacity, 43' x 3/16" wire rope, a long duty cycle and legendary WARN durability make this a tool you can rely on to get the job done.

• Strong 1000 pounds (454 kilogram) pulling capacity
• Smooth and durable planetary gear train. Mounting Pattern Length- 3.1 Inch. Mounting Pattern Width- 2-1/2 Inch
• Powerful permanent magnet motor with serviceable brushes for long life
• Sealed, pendant-style remote with 8 feet (2.4 meter) lead
• Long 43 feet (13.1 meter) of 3/16 inch (4.8 millimeter) wire rope

User questions & answers

Question:	Does the control cord unplug from the housing
Answer:	No. Both the control and power cords are permanently attached.
Question:	would this winch be tolerable "noise wise" if used indoors
Answer:	Really the noise depends on how much it is pulling. I used it to pull a boat into the garage and it wasn't too loud but I was not inside.
Question:	does the motor have a recovery time after a period of use
Answer:	supposed to wait 2 times as long after use before using again. so for 20 seconds you wait 40 seconds before using again. it works well. we use it to load and unload an 800 pound cabinet into our toyhauler.
Question:	is it able to freewheel to take the cable outor is it power in/out. thanks
Answer:	Power in and out ... but I discovered that there is a handle at the cable-end of the winch that allows you to disengage the spool from the drive motor. I've never used this feature, but there are instructions printed on the unit showing how to use it.

Product description

U.S. made 12 volt DC electric winch works great for mobile applications or around water. Just connect to vehicle battery, and the StrongArm winch will make quick work of difficult loading and pulling jobs. Some of the uses include: Race car trailers; antique car trailers; boat trailers; mounted on ATVs; moving hay bales; pickup cranes; livestock feeding equipment; articulating conveyors.

All D-L StrongArm; electric winches are built for multipurpose hauling and pulling operations. They are not to be used as hoists for lifting, supporting, or transporting people, or for handling loads over areas where people could be present.

• 3000 lb. (dead weight) single line load capacity
• 570:1 gear ratio
• Includes 7/32" x 25 feet aircraft cable and hook, installed and ready to use
• Quickly connect to car battery
• 3-minute run time requires 15-minute cool down

User questions & answers

Question:	What is the difference between dutton lainson and goldenrod dutton lainson
Answer:	Hello Kunal, Yes! This EZ DIP model option includes EZ DIP Belt, 660# pound 30" Chain, and Patented 'Never Drop' Dumbbell Hook. Hope this helps! LPG Muscle
Question:	Does this have a clutch or not, as you list two similar models
Answer:	It fits up to 50" maximum and between 28" and 48" comfortably, thank you.

Product description

This WARN Winch has a 3,000 lbs. pulling capacity, a TEFC Induction AC motor for a long duty cycle and 100' of 5/16" wire rope, the 3000 ACI just what you need when you need a heavy-hauling AC powered winch. The perfect fixed-mount station winch.

• All metal gear housing
• 3 stage planetary gear design
• Sliding ring gear clutch
• Mechanical braking system
• Fan cooled motor
• Motor Horsepower - 0.7 Horsepower

User questions & answers

Question:	Is this winch made in USA
Answer:	With Bluetooth active on your device hold down the middle button and + button on the earphone volume selector for about five seconds. It should light up and your device should detect it.
Question:	What fairlead should I buy with this and what hardware/wiring should I buy
Answer:	That hook will hold more that u will ever pull Lol! It was tested to over 800# on an EZ DIP belt with zero deformation. Ur not gunna hurt it rest assured friend
Question:	Will this plug into a 110 outlet
Answer:	Hello, the width is 4” center to center!
Question:	Is there a comparable winch that will work with a wireless remote? I need this for a boathouse
Answer:	Hello, thanks for interest in the best belt out there! We pull tested the design to over 500 pounds. It's rated at 450. And warranted for life. As for hook it is 4.5 inches wide and will hold any dumbbell with handles up to 1 3/4" round. Good lifting!