13 best highland aluminum ramps

Product description

Highland Aluminum Center Fold Loading Ramp is designed for easier loading and unloading into the vehicle. Measuring 85 Inches long by 12 Inches wide; this ramp has a hold capacity of 700 lbs. The Smooth Rung design has 360 Degree anti-slip ribs providing front-to-back and side-to-side traction. The wide aluminum rungs provide a smooth transition into your truck or trailer and the close rung spacing supports wheels of all sizes. Rust and corrosion resistant, these ramps are backed by a one year warranty. Adjustable attachment straps are included. Highland is the leader in cargo management and vehicle protection products, dedicated to helping motorists safely load, anchor, secure, tow, carry, trailer and organize cargo. From Highland's aluminum ramps and cargo organizers to fat strap bungees and cargo securing products, Highland products are manufactured to quality standards designed to exceed every expectation. Highland continues to be the market leader in loading ramps because of its commitment to innovation, quality and reliability.

• 700 pounds capacity
• Center-Fold ramp for easy storage
• Smooth rolling rung design
• 360 degree anti-slip ribs provides enhanced traction
• One year limited warranty

User questions & answers

Question:	Do you have to remove your truck's bed gate? Or can you attach the ramp directly to the gate
Answer:	I have this helmet in a Large Orange and I have the outdoor tech chips as well. This helmet is a perfect fit for the chips. The liner has soft Styrofoam inserts in the place where audio devices would go as a place holder until you fill them with audio equipment. I have never been happier with my audio and helmet compatibility than I am right now.
Question:	so one UNIT is a pair?? Or just one ramp? I have seen others that state 1 ramp. Not unit
Answer:	GIRO HELMET SIZE CHART To determine the correct helmet size, wrap a measuring tape around your head, keeping the tape just above the ears and level front to back. Snow Helmets Bike Helmets SNOW HELMETS ADULT HELMET SIZING SIZE (CM) SIZE (IN) S 52 - 55.5 20.5 - 21.75 M 55.5 - 59 21.75 - 23 L 59 - 62.5 23 - 24.25 XL 62.5 - 65 24.5 - 25.5 YOUTH HELMET SIZING SIZE (CM) SIZE (IN) XS 48.5 - 52 19.25 - 20.5 S 52 - 55.5 20.5 - 21.75 M 55.5 - 59 21.75 - 23
Question:	Does this come with straps to prevent the ramp from sliding off the bed of the truck
Answer:	Just checked with my son.....He said "Yes it does"Hope that helps :D
Question:	How does the ramp actually fold? Do the sections need to be un-bolted? Doesn't appear to be any hinge mechanism for it to easily fold
Answer:	Hi. Does it come in youth or adult size? I am adult medium so I can fit into youth large often, sometimes even medium. Depends on the model. Thank you

Product description

Our MaxxHaul aluminum ramp top kit has a width of 8" for each ramp and maximum capacity of 1400 lbs (700 lbs each). This top kit features duty aluminum construction for durability. Each ramp is designed to turn 2" x 8" boards intol all-purpose ramps. Includes protective pads that will help prevent scratching your tailgate. Non-skid top surface is designed to prevent slipping and increase traction.

• Turns your 2" x 8" boards into a sturdy, all-purpose utility ramps for loading your trailer, truck, shed and more
• Constructed from heavy duty extruded aluminum that will provide years of service
• Equipped with protective pads to protect your tailgate
• Features non-skid top surface for improved traction
• Includes mounting hardware to make installation fast and easy

User questions & answers

Question:	I want to use these to make ramps to load my D130 on my trailer. Trailer is 22" high, how do iknow how long of 2x8s I need so mower deck clears top
Answer:	I have 285 width rear tires. They fit with a small amt of space left on both sides. 20mm wider is less than an inch. it may stick out slightly beyond the sides, but it would still be fine IMO.
Question:	Why does it take 1-2 months to ship
Answer:	USAExcellent RampsNot as fearful with these as other brandI bought these to replace another brand I bought from HF that scared me because the plastic was brittle and pieces of ramp would crack off.... Always use jack stands just in case
Question:	Why does it say ships in 1 to 2 months? I'm not going to wait 2 months
Answer:	As far as I can determine, the height is the same. The difference is the maximum weight each set can hold. J.D.
Question:	Do they specify a certain length for the 2X8 boards
Answer:	I just put a tape measure onto the ramps and came up with the following - 6.5 inches tall, 10 inches wide, 35 inches long. Note that the tall/wide measurements were taken to the actual area where the tire sits. There is about an additional 1 to 2 inches plastic lip on the sides and back that cradle the tire once it's firmly at the top of the ramp. Manufacturer may use the outside dimensions but those don't tell you the true usability. In all honesty, they don't raise the car as much as you might think but they are fine for light duty.

Product features

Durable and Sturdy

Sturdy aluminum construction with traction surface to reduce or minimize slippage.

Easy To Install

Pre-drilled holes for easy installation.

Versatile

Safely load your equipment by converting your 2" x 8" to a pair of portable ramp.

Product description

bROK 8 inch Aluminum Ramp Kit 700 lb capacity are the perfect solution for you to Command-The-Task at hand. These Ramp Kits enable you to create custom ramps for all your loading needs. The full width ultra-ribbed plates provide maximum traction with a strong, stable surface. Made with high grade aluminum and plated hardware, these ramp ends resist corrosion and provide years of service. The included full width scratch proof pads protect surface finishes. WARNING: This product can expose you to chemicals which is [are] known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

• Aluminum Ramp Kit to COMMAND the task of loading your essentials
• CONFIDENTLY turn your 2" x 8" planks into ramps to transport up to 700 lbs of your essentials with full width slip resistant traction ribs
• PROTECT your paint finish with the included scratch proof pads
• QUICKLY create ideal length ramps with the included hardware and your wood planks
• PROTECT your investment with high quality solid aluminum ends, scratch proof pads and steel hardware.

User questions & answers

Question:	Does brok (or anyone) make anti-slip rubber pads for the opposite end to avoid having to miter the bottom? can't find them in the 12-inch
Answer:	The ramp attaches to the top edge of the gate after it is open. It rests on the edge and is secure. It works very well.
Question:	What is the actual width of these brackets
Answer:	I bought mine through Amazon from Naples. Ramps were sold separately but at $30 each and $30 shipping I still bought two nice ramps for under $100.
Question:	Can the ends be bent to set flat on the surface the ramps set on
Answer:	Yes make sure you put another bolt on the ramp that just has 1
Question:	How much max weight will these hold. Motorcycle
Answer:	There is a set of hinge bars you bolt the two pieces together with, so it folds up very easily without the need to unbolt anything

• BUILD YOUR OWN RAMPS: Use the BISupply Aluminum Truck Ramps Loading Ramp Kit to turn simple 2 by 12-inch (5.1 by 30.5 cm) boards into sturdy, all-purpose utility trailer ramps; Each package of ramp parts includes 2 aluminum loading ramps, 2 rubber anti-slip loading ramp ends, and installation hardware to assist in constructing a total of ramps; 2-inch by 12-inch ramp boards required (not included); Kit weighs just under 9 pounds for easy storage, installation, and handling
• DURABLE ALUMINUM RAMP PLATES: Constructed of quality aluminum material ensures that these load ramps are designed for maximum strength and durability; Loading ramp brackets provide reliable stability and resistance to rust and corrosion; Features a 1.37-inch (3.5 cm) board insert space, non-skid threads on the 5.4 by 11-inch (13.7 by 27.9 cm) faceplate, and pre-screwed bolt holes
• ANTI-SLIP FEET: Forget about cutting angles to make your ramps sit flat, simply slide one of these 4 by 11-inch (10.2 by 27.9 cm) rubber ramp ends for boards on the end of the board and you are ready to load up anything; Anti-slip rubber feet help to hold your ramp in place while loading up your toys
• MAXIMUM CAPACITY MEETS YOUR NEEDS: Each set of truck ramp kits has a maximum load capacity of 700 lbs. (317 kg) each, while combined these ATV ramps can handle up to 1400 lbs. (635 kg); With this much support, you can quickly and safely load, secure, tow, and organize your motorcycles, motocross bikes, wagons, wheel barrels, bicycles, snowmobiles, four wheelers, and ATVs into a storage shed, truck bed, or trailer
• EASY TO INSTALL: Using the included hardware, attach the 2 aluminum top plates to one end of your 2x12 lumber board; Slide the anti-slip rubber feet to the other end; Place the top plates on the edge of the tailgate and adjust the distance between the ramps based on your load size; Extra holes in the top plate allows you to drill the ramp into place on your tailgate for a more secure hold

User questions & answers

Question:	Can you use these with a 2 x 10? Rod J
Answer:	They are pretty thick. They should hold most any motorcycle no problem. The board will give away before the metal part does if it’s to heavy.

• BUILD YOUR OWN RAMPS: Use the BISupply Aluminum Truck Ramps Loading Ramp Kit to turn simple 2 by 8-inch (5.1 by 20.3 cm) boards into sturdy, all-purpose utility trailer ramps; Each package of ramp parts includes 2 aluminum loading ramps, 2 rubber anti-slip loading ramp ends, and installation hardware to assist in constructing a total of ramps; 2-inch by 8-inch ramp boards required (not included); Kit weighs just under 6 pounds for easy storage, installation, and handling
• DURABLE ALUMINUM RAMP PLATES: Constructed of quality aluminum material ensures that these load ramps are designed for maximum strength and durability; Loading ramp brackets provide reliable stability and resistance to rust and corrosion; Features a 1.37-inch (3.5 cm) board insert space, non-skid threads on the 5 by 7.25-inch (12.7 by 18.4 cm) faceplate, and pre-screwed bolt holes
• ANTI-SLIP FEET: Forget about cutting angles to make your ramps sit flat, simply slide one of these 4 by 7.5-inch (10.2 by 19.1 cm) rubber ramp ends for boards on the end of the board and you are ready to load up anything; Anti-slip rubber feet help to hold your ramp in place while loading up your toys
• MAXIMUM CAPACITY MEETS YOUR NEEDS: Each set of truck ramp kits has a maximum load capacity of 700 lbs. (317 kg) each, while combined these ATV ramps can handle up to 1400 lbs. (635 kg); With this much support, you can quickly and safely load, secure, tow, and organize your motorcycles, motocross bikes, wagons, wheel barrels, and bicycles into a storage shed, truck bed, or trailer
• EASY TO INSTALL: Using the included hardware, attach the 2 aluminum top plates to one end of your 2x8 lumber board; Slide the anti-slip rubber feet to the other end; Place the top plates on the edge of the tailgate and adjust the distance between the ramps based on your load size; Extra holes in the top plate allows you to drill the ramp into place on your tailgate for a more secure hold

User questions & answers

Question:	What size drill bit is needed for the tailgate
Answer:	If 10" is enough for your load, I don't see why not although you may have some overhang of the ramp plates.
Question:	x8 lumber from homedepot/lowes is acturally 1.5x7.25, does it fit this 2x8 ramp kit? OR should I buy 2x10 lumber ? How long for best ramp angle
Answer:	The ramps work fine without mitering bottom of 2x6 boards, I’ve loaded and unloaded large snow blower eassaly without any trimming of boards.
Question:	Could I use this kit to make a ramp to get in and out of a shed? The elevation is only about 16-18 inches
Answer:	The brackets are scaled to fit the actual dimensions of a finished 2 x 12 board. 1-1/2" x 11-1/4". These are good brackets that are easily attached to the board. Buy them. You will be pleased with our purchase.
Question:	What lenght board is recommended to use with this kit? Thank you
Answer:	There is no need to bend the aluminum ramp ends. The ends will lay flat on the supporting surface if the wood ramps are cut to the correct length. The instructions supplied with the kit specify how long the wood ramps need to be dependent on the height from the ground that the ramps will be placed on. Additionally, there are pins in the kit that can be installed on the ledge that the ramp sits on. The pins slip into holes in the ramp ends securing the ramps in place while the ramps are in use.

Product description

The Black Widow 48.5" Black Steel ATV Trailer ramps have a maximum 1,600-pound capacity. Includes two safety tie-down straps to prevent ramp kick-outs during loading. The mesh surface allows water and debris to filter through while providing added loading traction. Features integrated carrying handles for portability. Stores inside the trailer between uses. Made with heavy-duty steel construction, finished with a black for long lasting durability.

• Dual runner loading ramps for loading and unloading ATVs and other off-road vehicles into pickup truck beds or trailers; package includes 2 ramps
• Each ramp measures 4' 0.5" L x 11" W; 1,600 lb weight capacity
• Integrated carrying handles make it easy to transport
• Mesh surface filters debris and provides traction; rubber-coated finger-style attachment points provide sturdy grip without scratching your truck bed or trailer; 2 included safety straps secure the ramp to your vehicle
• Durable, powder-coated steel construction

User questions & answers

Question:	I'd need them to load a Four wheeler into a truck. All the comments say trailer so I wanted to check, would it work to load into a truck
Answer:	It's not the longest of its kind; depending on how high above the ground the floor of your truck is, it may be a steep slope to load your four wheeler. I would advise to gauge the angle with a stick of same length before ordering, or to order a longer item if your four wheeler is heavy. Besides that this item is well buit and sturdy, also comes with a retainer system to avoid the ramp to slip from the truck and fall down under strain. A very good item overall, but check the length with your own truck.
Question:	How do these hook to the back of your trailer? Do you need to buy some extra hardware
Answer:	The ramps rest on the back of the trailer with rubber coated fingers and come with red straps that hook to the back of the trailer To help of the ramps steady for loading and off-loading. No extra hardware is needed.
Question:	What is the weight rating per ramp? Looking to load a fully dressed Harley davidson on a trailer
Answer:	My husband uses them to load a John Deere gator tractor onto a trailer with no problem. Don't know the weight but would think it weighs more than a Harley. Hope this helps you.
Question:	how wide is each ramp
Answer:	Not sure how wide they were,I return them they were to short for my f-150 ford truck good luck sorry I couldn't help you more.

Product description

Ultra-Tow heavy-duty aluminum ramp top converts an 8ft. wood plank into a quick and inexpensive loading ramp to load your ATV, motorcycle or lawn mower into your pickup truck or onto a trailer. Ramp Length in. 96, Bracket Width in. 12, Fastening Hardware Included Yes, Load Capacity lbs. 750, Product Type Ramp top plate, Load Capacity per Ramp lbs. 750, Material Type Aluminum, Recommended Lumber Size 12 in.W. Top plate quickly converts an 12in.W x 8ft.L wood plank into a loading ramp 750-lb. capacity Extruded aluminum Includes 2 plates and installation hardware

• Top plate quickly converts an 12in.W x 8ft.L wood plank into a loading ramp
• 750-lb. capacity
• Extruded aluminum
• Includes 2 plates and installation hardware

Product description

Turn any 2x8 or 2x12 board into a convenient custom ramp with the Keeper Ramp Kit. The kit contains two 2" x 8" heavy duty aluminum ramp ends and hardware. Just bolt these ramp ends to the boards and create a smooth transition into any truck bed. Eliminates the instability of using boards alone to load your truck. Use your custom ramps to load ATV's , motorcycles or snowmobiles. Boards not included.

• Ramp kit pair, with hardware
• 2" x 8" heavy duty aluminum ramp ends
• Use with 2 X 8 or 2 X 12 lumber
• Can be used on all trucks
• Lumber not included

User questions & answers

Question:	How thick is the steel used in these? I actually like that they're made out of steel
Answer:	The ramp kit I ordered was used to drive a mower into a storage unit. I never intended to use the ramp on my truck tailgate, so I cannot answer the question! Sorry!
Question:	What is the size of the bolts, and are these lock nuts
Answer:	Yes, a board of 1.5x7.25 will work with the kit. No worries. You can also use 2x10 lumber with the kit, but you should consider the extra weight this would add. A board of 8 feet is about the right length.
Question:	I have aluminum ramps probably 8-10 feet that I bough a while ago. Now I lost the ramp kit that came with it. Can I use this for the ramp kit instead
Answer:	Yes you could I used mine to make ramps for my truck
Question:	What is the load capacity
Answer:	I used 48” and they’re a little short for my Hyundai Santa Fe; makes the ramp a bit steep. My guess is 60” (5 feet) would be better.

Product description

Red Hound Auto Premium Bottom Ramp Set. Experts in the automotive and RV industries, Red Hound Auto manufactures premium products. Heavy duty commercial grade ramp ends, designed tough and made from the highest quality aluminum. Product is backed by a no-hassle 1 year Guarantee against workmanship and defects (for the original owner). Constructed of industrial grade aluminum that will not rust. Included: 2 piece heavy duty aluminum ramp bottom set with mounting hardware. Size/Dimensions: Approximately 7-1/4" Wide - Fits 2x8 Board - 700 lb. per ramp.

• Red Hound Auto premium bottom ramp set perfect for 2X8 boards
• Included: 2 piece heavy duty aluminum ramp bottom set with mounting hardware (boards not included)
• Size: Approximately 7-1/4" wide - fits 2x8 board - with an incredible 700 lb capacity per ramp
• Constructed of premium top grade industrial rust free aluminum that is reliable and made to last a lifetime
• Product is backed by a staggering 1 year guarantee against defects

User questions & answers

Question:	My pickup is a shortbed. Will the length be too long to travel w/ them? Approx weight of 1 typical ramp
Answer:	The steel is around 1/8" thick or more - it is plenty heavy for making ramps. I used 2" X 10" for wood and I can drive my garden tractor on them while riding on it and they do not bend at all
Question:	Do these include protective pads
Answer:	Carriage Bolt Size: M8-1.25 x 2in. and Self-Locking Flange Nut: M8-1.25 provided.
Question:	Does this manufacturer say that the ramp brackets are not recommended if thr tailgate height exceeds 32"? Some manufacturers do
Answer:	I believe you could. This kit is only brackets with carriage bolts. You may have to drill holes in your aluminum ramps and purchase the correct size bolts with washers.
Question:	can you use a 12 inch wide board with this
Answer:	The motorcycle I use these brackets for is ~400Lbs. with a full tank of gas + another 160lbs. (my weight) while I'm walking the bike down. I use two 2x8's side by side as a ramp. Seems like the wood you choose to attach the brackets to would be the limiting factor for weight, not the brackets. They are bent/shaped in such a way that would make it difficult for them to fail.

Product description

The West 8ft. Utility Ramp Kit is designed to load anything that rolls or has wheels, to a maximum lift of 24in.-36in. You supply the decking material (3/4in. plywood recommended), cut it to your desired width (up to 48in.W), then attach the side guide rails that are supplied in the kit. The guide rails add strength and prevent you from rolling off the side of the ramp. Ideal for scooters, wheelchairs, strollers, walking, cargo and more. Includes two rubber-coated support fingers. Folding design allows for compact storage. Made of galvanized steel for strength and corrosion protection. Plywood not included. Recommended Lumber Size: 3/4-in. plywood up to 48 in.W, Material Type: Galvanized steel, rubber, Ramp Length (in.): 100, Load Capacity (lbs.): 600, Product Type: Ramp kit, Fastening Hardware Included: Yes

User questions & answers

Question:	When I ordered mine, a handrail kit was available, but don't see it now. Anybody know a source
Answer:	short-bed is app 6 feet 6 inches long . boards need to be at least 8 feet long . as for weight 2x8 x8 weighs about 35 to 40 lbs .
Question:	can you connect two of the ramps together to get six foot width? Is there any harware kit to attach it to a building
Answer:	No protective pads are included
Question:	Can two of these be linked together to make a 16 foot ramp
Answer:	While it's not known for this maker. The reason is it's generally best for pickups to remove the tailgate when using loading ramps. This is due to excessive weight on the hinge area can Warp it or the tailgate itself preventing proper closing or latching.
Question:	Can this be attached to a utility shed
Answer:	I did, I'm sure it would be better to use 12" ramp ends, but these worked fine.

Product description

Build your own ramps with BROK ramp end kits. Super strong, top quality extruded aluminum kits provide many years of service. For use with 2 in. x10 in. boards. Installation hardware included. Protective no scratch pads included to protect tailgate or surface. 700 lbs. capacity per ramp. PROTECT your paint finish with the included scratch proof pads QUICKLY create ideal length ramps with the included hardware and your wood planks PROTECT your investment with high quality solid aluminum ends, scratch proof pads and steel hardware.

• Aluminum Ramp Kit to COMMAND the task of loading your essentials
• Ramp Ends are very easy to install; CONFIDENTLY turn your 2" x 12" planks into ramps to transport up to 700 lbs of your essentials with full width slip resistant traction ribs
• Adjustable,No Additional Features,Tread, Car ramp; Aluminium
• Installation and no scratch pads included
• 700 lbs. per ramp; Top quality extruded aluminum ends; 1-year limited warranty

User questions & answers

Question:	What's the actual width
Answer:	I think you would have to rig something for that to work. It comes with these little handles that sit on the top stair. It moves a bit depending on how much it is used. I don't think your doors would clear unless you attached it lower than floor level?? I altered mine with a 3rd section and had to drill holes in the metal which was not a big deal. Good luck!

Product description

Lund's Bi-Fold Loading Ramp has an extruded hole surface that provides traction, easy loading and accommodates all wheel sizes. The nylon safety straps secure ramps to vehicle to prevent shifting, and the angled foot provides smooth transition from ground to ramp. This Bi-fold ramp is constructed of aluminum for lightweight durability and is rust resistant.

• Ramp is 69" long and 30" wide (two panels, each 15" wide); 1500 pound total capacity (750 pounds per panel)
• Constructed of aluminum for lightweight durability and rust resistance
• Extruded hole surface provides traction for easy loading
• Nylon safety straps secure ramps to vehicle to prevent shifting; Rubber protector to protect tailgate
• Made in the USA and backed by a limited lifetime warranty

User questions & answers

Question:	how does it attach to a tailgate
Answer:	11 1/4 inches. Nice fit on dimensional 2x12 which is close to the same width
Question:	How much does it weight
Answer:	There is no additional rail kit available for the ramp.
Question:	is this item exactly 69" long? with tailgate up and bedliner in the bed, my truck only has 68 1/2" of clearance
Answer:	I bought 2 8 foot kits and drilled my own holes to attach half of one to the 8 foot section to give me 12 feet. You could use six foot width boards but I think it would sag in the middle. As it was, I put a wooden box underneath right in the middle to make it a little more solid. It did not come with hardware to attach it to the building. The handles that rest on the stairs do move a bit and you have to continue to push the ramp back but it wasn't a big deal. Overall it was a great option to wheel my mom in and out.
Question:	I'm confused by the picture. Is that 2 ramps side by side? The dimensions show 30" to center
Answer:	You can not put two ramps together to make a 16 foot ramp.

Product features

LUND 602004 Bi-Fold Loading Ramp

The LUND 602004 Bi-Fold Loading Ramp is the perfect accessory for loading heavy gear in and out of your truck bed. With a 1,500-pound weight capacity, 69-inch length and 30-inch width, this sturdy ramp can support even the heaviest ATVs and utility carts.

Truck beds are not just for show, make the most out of your truck with this ramp. Now you are able to load your truck without the hassle. The Lund Bi-Fold Loading Ramp is here to make your life easier.

Durable and Made for Easy Storage

Made of lightweight aluminum, this loading ramp is both durable and easy to carry. Each of the aluminum panels holds 750-pounds, combining for a total weight capacity of 1,500-pounds. The aluminum is also crafted in the USA and rust resistant for increased durability.

The bi-fold design of this loading ramp is innovative and created especially for easy storage. The loading ramp comes apart, folding down to a 15-inch width, so you can quickly store the 602004 in the tightest of spaces. The 30-inch assembled width fits most wheel sizes for easy loading and unloading of vehicles.

About Lund and Lund International

Lund International is an innovator and industry leader with the most functional, high-performance, protective and stylish automotive aftermarket accessories brands in the industry. The complete product offerings of Lund International fall under eight distinct brand names: AMP Research, AVS, Belmor, Bushwacker, LUND, Rampage Products, Stampede, and TonnoPro.. The LUND brand is a premium automotive accessories brand offering high performance and stylish accessories for trucks, SUVs, CUVs and passenger cars. LUND’s full product line includes hood shields, running boards, tonneau covers, floor coverings, storage boxes and more.

Product description

The Highland Ramp Carry Strap assembly has been designed to facilitate in carrying utility ramps up to 50 lbs. total weight. Use one strap to bundle and easily carry multiple ramps together, the secure buckle provides custom fit. Highland is the leader in cargo management and vehicle protection products, dedicated to helping motorists safely load, anchor, secure, tow, carry, trailer and organize cargo. From Highland's aluminum ramps and cargo organizers to fat strap bungees and cargo securing products, Highland products are manufactured to quality standards designed to exceed every expectation. Highland continues to be the market leader in loading ramps because of its commitment to innovation, quality and reliability.

• Bundle and carry multiple ramps
• For use on straight, arched or folded ramps
• Secure buckle provides custom fit
• Contoured handle allows for easy gripping
• Carry ramps up to 50 pounds