13 best mat cutter michaels

Product description

4590 mount cutter use instructions:

Firstly:draw out-line on cutting material

Put cardboard under the cutting material to protect cutting surface

Hook”4590”on special guide rail ruler or against any straight -edge.. Slide blade out slightly move”4590”from side to side several times&Slowly increase cut depth in each time

4590 mount cutter Fro cutting:cardboard,leather,paper and vinyl...etc

45°&90° cutting should separately use to insure the perfect cutting,when use one side cutter,please store up the other side blade

• Cutter 45 & 90 degree bevel Mat Board Cutter, With 3pcs Free Replacement Blade
• Unique V Type Blade,Cut Material Up To 7mm Thick，For Cutting Cardboard,Leather,Paper and Vinyl...etc
• Cutting Material: Mat Board,Put Cardboard Under The Cutting Material To Protect Cutting Surface
• A Little Difficult To Use,Pls Hook It On Special Guide Rail Ruler Or Against Any Straight -Edge.. Slide Blade Out Slightly Move It From Side To Side Several Times&Slowly Increase Cut Depth In Each Time
• Good To Make Decorative Frames For Pictures And Photos, To Make Architectural Models, And To Frame Artwork, Etc.

User questions & answers

Question:	what guide rail ruler can i attach this to
Answer:	No. Rhodium model has no gold part anywhere and there is no difference between two models, they are exactly the same pen.
Question:	I'm not finding blades listed anywhere. Are they for sale somewhere
Answer:	The con-70 only fits the metal falcon pens, which run about 100$ more.
Question:	Is it possible for this to cut through basswood
Answer:	You want De Atramentis White Document ink, it's the only one I know safe for fountain pens. Just make sure you have some fountain pen flush on hand as it's a waterproof ink I believe and more likely to clog but you should be fine. Always use fountain pen inks. (If your pen clogs and flush isn't enough, the community recommends sonic cleaners. But you should be fine.)
Question:	Where do I buy replacement blades
Answer:	It comes with a metal pen case.

• The Nicapa cutting mat use for Silhouette Cameo 3/2/1 [Stronggrip,12x24 inch,3pack].
• The Nicapa stronggrip cut mat for Silhouette Cameo ioffers a strong adhesive surface perfect for securing heavyweight materials; including: thick cardstock,glitter cardstock,specialty cardstock, magnet material,chipboard,poster board,fabric with stiffener etc.
• Keep the clear film cover on the mat when storing to keep mat free from paper scraps and dust. Use the scraper to scrape away excess pieces and the spatula to carefully remove cut images.

Product features

Nicapa Cutting Mat for Silhouette Cameo 3/2/1

A.Please keep cutting mat clean and dry before use.

B.Can not be used in too cold or too hot environment,

Recommended for use at room temperature 32℉~86℉(0℃ ~30℃).

C.Please pay more attention to adjust the cutting depth when using.

D.Please keep the clear film cover on the mat when storing after use.

Nicapa Cutting Mat for Silhouette Cameo 3/2/1

• Three sizes of packaging.
• Perfect for a wide range of medium-weight materials, including: Cardstock,printable Iron-on,Glitter Cardstock,Pattern paper,Pearl Paper,Vellum,Printer Paper,Vinyl,Glitter Iron-on,Handmade papers,Washi Sheets,Craft paper,Thin fabrics,Embossed Cardstock,Light Cardstock,Printable Sticker Paper,Construction Paper,Window Cling,Printable Fabric etc.

LightGrip

• Light Cardstock
• Construction Paper
• Printable Fabric
• Printable Iron-on
• Pearl Paper
• Printer Paper
• Vellum
• Vinyl

StandardGrip

• Glitter Cardstock
• Heavy Cardstock
• Iron-on
• Glitter Iron-on
• Flocked Iron-on
• Patterned Paper
• Embossed Cardstock
• Printable Sticker Paper
• Window Cling

StrongGrip

• Acetate
• Adhesive Foil
• Chipboard
• Craft Foam
• Fabric
• Fabric with Stiffener
• Faux Leather
• Felt
• Magnet Sheets
• Poster Board

Product description

Anezus self healing cutting mat 18x24 inch is made of 5-layer PVC material, cutting mat for sewing is compatible with rotary cutter and blades knife, preventing from any hurt to blades. Cutting mat for crafting is provide more protection for your table and desk surface. Perfect for small, medium and large craft and sewing projects.



Product Information:



Self Healing Cutting Mat

Material: 5-layer PVC material,

Size: approx.24 x 18 inches (60 x 45 cm)

Color: green



Items Included:

-1 x A2 Rotary Mat

• Cutting Mat for Sewing and Crafts – Anezus self-healing cutting mat is compatible with rotary cutter and blades knife, preventing from any hurt to blades.
• Large Sewing Cutting Mat – Our fabric cutting mat is A2 size, measures approx. 24” x 18” (60 x 45 cm), provide more protection for your table and desk surface. Perfect for small, medium and large craft and sewing projects
• Versatile Sewing Craft Mat – This rotary mat is great for quilting, sewing, fabric, scrapbooking project cutting projects. Ideal for artists, crafters, quilters, engravers and hobbyists
• Premium Self–Healing Sewing Mat – Hobby cutting mat made of 5-layer PVC material, the white hardness PVC in the middle help to prevent cutting through. Special finish reseals surface cuts, providing a continually smooth surface for all cutting projects
• Double Side Quilting Cutting Mat–This sewing cutting board for fabric is printed clearly with both inches, metric grid lines measurement and angles help to cut precisely

User questions & answers

Question:	Does it work well
Answer:	I don't recall if it comes with cartridges. It does come with an ink filler insert. I strongly recommend purchasing Noodler's waterproof fountain pen ink and using the filler device. The ink flows well and really is waterproof.
Question:	Does this have a cutting slat for scissors
Answer:	All Lamy pens are tested with BLUE ink, and all genuine LAMY pens (regardless of the color of the pen itself) include a BLUE ink cartridge. If you got a different color cartridge with your pen, then you might have gotten a counterfeit one (there are a lot being sold). Check on Youtube for videos about how to spot the difference between real Lamy Safari pens and cheap knockoffs.
Question:	Does the cutting mat really self healing
Answer:	Probably because they put the incorrect picture. Who knows...
Question:	The self-healing mat is double printed side
Answer:	Mine worked out of the box. Nice smooth writer. I purchased this pen early on in my collecting phase. When I go back to it I am always amazed how well it writes.

Product description

Replacement blades for many Logan mat cutters including 250, 301, 401, 424, 440, 450, 500, 525, 700-S, 701, 750, 2000, 3000, 4000.

• Logan 270 blades
• For Logan mat cutters
• Strong and high quality blades
• Fits many Logan mat cutters
• For -250 -301 -401 -424 -440 -450 -500 -525 -700-S -701 -750 -2000 -3000 4000

User questions & answers

Question:	What is the difference single bevels and double bevels mat cutting blades
Answer:	The pen has a nice nib, a bold one for writing. I am not sure about drawing.
Question:	Do these fit all the Logan mat cutters? (The #270 is throwing me--want to make sure they don't just fit a #270 cutter
Answer:	Remove cover and write
Question:	What is the exact size of the blades
Answer:	Hello, it depends on how much you use it. I personally use it for taking notes almost every day and one cartridge lasts about 1-2 months. If you will be writing a lot, one cartridge will last maybe 1-2 weeks. You can give it a try and see how long it lasts based on your writing and then decide whether you want to get more cartridges or a bottle of ink and use it with the included converter as a cartridge. This pen comes with 1 blue cartridge inside the pen + 5 black cartridges and a converter as a gift.
Question:	Does anyone know if these are a proper substitute for c+h advantage 1200(se) and 1500 mat cutter blades? thanks
Answer:	the Lamy brand converter works great.

Product description

Cricut explore air 2 is a DIY Speed machine. This quick, smart cutting machine lets you make projects with over 100 different materials. Plus, save even more time with Cricut mobile Apps and predesigned projects.

• CREATE MORE: The Cricut Explore Air 2 is your personal DIY cutting machine. It will flawlessly cut over 100+ different types of materials including premium vinyl, iron on and htv vinyl, cardstock, faux leather, adhesive foils, specialty paper, poster board and more
• ENDLESS PROJECT POSSIBILITIES: The Cricut Explore Air 2 makes it so easy to create a wide arrange of DIY projects. Make custom stickers, personalized home decor, home-made gifts and party favors, unique greeting cards, custom designed apparel, and more
• INCLUDED WITH MACHINE: Each machine includes a Cricut Premium Fine Point Blade and Housing, a Cricut 12 inch x12 inch Light Grip Adhesive Cutting Mat (perfect for vinyl and htv projects), a Cricut Black Fine Point Pen, access to Cricut's design software Design Space, and a 2 week free trial to Cricut Access
• DESIGN FOR FREE: Upload or create and design your own images for free from your computer, tablet or mobile phone using Cricut's free design software design space. Enhance your design space experience by subscribing to Cricut Access, Cricut's vast library of over 100,000 images, fonts, and make it now projects and designs
• BECOME A PART OF A COMMUNITY: We know it can be intimidating to start creating your first DIY projects, so don’t do it alone. When you buy a Cricut you become part of a close-knit community of crafters, makers and DIYers. There are dozens of groups across all social media platforms that allow our members to share tips, ask for help and share their projects and inspiration with an amazing community

User questions & answers

Question:	Can i use with a window based computer or does it have to be a MAC
Answer:	We just got out of a Cricut class tonight, 10/14/2019) at a local Michaels. We (my wife and I) both downloaded the DesignSpace software in class from the Cricut website to our Windows 10 laptops and after downloading a small Windows add-in, were able to launch DesignSpace, create and cut projects successfully from out laptops. We also had out Apple iPads and downloaded the Apple Store DesignSpace app and had no problem using them to design and cut. Can’t speak about the Mac though...
Question:	I am looking to get my first Cricut machine. Will the faster speed matter or should I save some money and get the previous version to learn on
Answer:	The only difference between the air1 and air2 is the speed of the cut and the color options for the machines. I have the air2 and I honestly haven't even tried the faster cutting option because I've been cutting really delicate things and I was afraid that it would rip the material at a faster speed. I guess this question depends on how much you would use it and for what. I don't, by any means, think the air1 is "slow".
Question:	I want a machine to cut out my own designs from photoshop/illustrator, I'm not interested in any of the library images etc. Can this do this, well
Answer:	Through personal experience, the Cricut Design Space software let’s you upload svg files, but not ai or eps. The best advice for cutting images from Illustrator is to use a USCutter instead, it uses a software called Sure Cuts A Lot and works with alot of file types (ai, eps, svg)
Question:	what are included in the box in addition to the mashineeverything you need to get started (what’s included in the box) • cricut explore air™ 2 machine
Answer:	here is whats included.....Cricut Explore Air 2 machineCricut Design Space software and appGerman carbide premium bladeUSB cord and power cordAccessory adapter100+ free images50+ free projectsGetting Started guidePen and cardstock sampleCricut 12″ x 12″ StandardGrip cutting mat

Product features

Cut

Cut intricate details with ultimate precision, from lace stationery designs to fine snowflakes and spider webs for holiday decor.

Write

Use Cricut Pens to make 'handwritten' cards and projects. Choose from over 370 fonts, or use a favorite font from your computer for free. Then sit back and watch Cricut Explore write away!

Score

With the Scoring Stylus, Cricut Explore machines create perfect fold lines for cards, envelopes, boxes, 3D paper crafts, acetate pinwheels, and much more.

Cut And Write Up to 2x Faster.

Make the most of every minute with the new Fast Mode – up to 2x faster cutting and writing for vinyl, iron-on, and cardstock. Get it exclusively with the Cricut Explore Air 2.

Cut 100+ Different Materials.

This machine cuts everything–from thin vellum to thick leather. The Smart Set dial and custom material selection in Design Space put more than 80 different material settings at your fingertips.

Design Anytime. Anywhere.

Are you a designer? Then this one’s for you! Upload and cut out your own artwork absolutely free. Upload files, and turn your masterpieces into home decor, cards, gifts, fashion, and more. Design on your computer, iPad, or iPhone with Design Space–free, cloud-based, easy-to-use software that lets you edit, customize, and preview projects. Choose from ready-to-make projects and thousands of Cricut images, or upload your own designs. Download the Design Space app for iOS to craft on the go, and try our new offline feature to design without an Internet connection!

Your Designs. Our Tools. Endless Possibilities.

Are you a designer? Then this one’s for you! Upload and cut out your own artwork absolutely free. Upload files, and turn your masterpieces into home decor, cards, gifts, fashion, and more.

Go Wireless.

The Cricut Explore Air and Cricut Explore Air 2 offer wireless cutting, writing, and scoring with built-in Bluetooth.

Choose Your Image.

Find images for every project, holiday, and style in the Cricut Image Library! We offer more than 60,000 images.

Print Then Cut. Simple As That.

Print full-color images and patterns, then watch your Cricut Explore machine cut them out for you! There are more than 50,000 printable images and 920 printable patterns in Design Space. Or you can simply upload your own!

Product description

Cricut Cutting mats have been customized to match commonly used crafting materials. Each has just the right level of grip to not only hold your material firmly in place during Cutting, but to also allow you to easily remove the material from the adhesive surface.

• The standard grip mat is a multipurpose mat that is perfect for a wide range of medium weight materials, including patterned paper, vinyl, iron on, and cardstock
• Includes 3 12x12 Cricut standard grip mats
• Use with Cricut maker and Cricut explore smart cutting machines

User questions & answers

Question:	What are the different colors used for
Answer:	Yes, these cutting mat can be used on clothing, and I uesd this green mat for HTV to make some t-shirt for my kids, they love it.
Question:	What cutting mat is for Cricut Expression, 6x
Answer:	I used on my cricut maker, they worked well with vinyl , they are easy to get the vinyl off.
Question:	Does it work with scan n cut
Answer:	of course, they are also able to be cleaned.they can use many times if you clean it probably.
Question:	What are they used for
Answer:	yes, they indicate the grip/strength. Blue is light grip , it fit lightweight materials such as card stock, printer paper, wrapping paper, washi paper, etc. The Green is Standard Grip for iron on/HTV, vinyl, heavy cardstock, glitter vinyl or htv,pattern paper, pearl paper, vellum,etc The purple is Strong Grip for thick material, glitter cardstock, poster board, faux leather, foam, fabric, etc

Product features

LightGrip Machine Mat

Perfect for lightweight materials, including standard paper, light cardstock, vellum, and more.

StandardGrip Machine Mat

Designed to handle heavy cardstock, patterned paper, vinyl, iron-on, and a wide range of medium-weight materials.

StrongGrip Machine Mat

Your go-to for heavyweight materials, like specialty cardstock, chipboard, matboard, and backed fabric.

FabricGrip Machine Mat

Combines increased strength and density plus a light adhesive to create beautifully cut fabrics with the Rotary Blade or Bonded-Fabric Blade.

• The Nicapa blue cutting mat Lightgrip,12 x 12 inch,3pack
• The Nicapa lightgrip cut mat for specially formulated for lightweight materials, the long-lasting LightGrip mat allows you to easily cut and cleanly remove materials; including: common office paper,Cardstock,Light Cardstock,Construction Paper,Printable Fabric,Printable Iron-on,Pearl Paper,Printer Paper,Vellum,Vinyl,Washi Sheets etc.
• Keep the clear film cover on the mat when storing to keep mat free from paper scraps and dust. Use the scraper to scrape away excess pieces and the spatula to carefully remove cut images.
• *Nicapa Ltd. and the Nicapa brand have no affiliation with Cricut, Inc.

User questions & answers

Question:	how many cuts can you get from one mat before the stickiness fades
Answer:	No, but you can remove the legs with a click of a button. It's a pretty nice chair!
Question:	how many cuts can you get from one mat before the stickiness fades
Answer:	The bottom does not fold. It stays open.
Question:	What kind of material is the mat made from
Answer:	Yes! this is a very functional high chair.
Question:	Can these mats be cut into a smaller size? Like 8x
Answer:	Charcoal / plastic

Product description

Cricut cutting mats have been customized to match commonly used crafting materials. Each has just the right level of grip to not only hold your material firmly in place during cutting, but to also allow you to easily remove the material from the adhesive surface. The StandardGrip mat is a multi purpose mat that is perfect for a wide range of medium weight materials, including patterned paper, vinyl, iron on and cardstock. Two mats are included in each package. Using both mats allows you to cut one image while working on another.

• Compatible with cricut machines
• Works with the Cricut Explore machine, Cricut Expression machine, and Cricut Expression 2 machine
• Includes two 12 inches x 24 inches Standard Grip adhesive cutting mats
• To ensure best performance, use the recommended material types on the mats: Cardstock, Pattern Paper, Embossed Cardstock, Iron on and Vinyl
• Keep the clear film cover on the mat when storing to keep mat free from paper scraps and dust
• Use the scraper to scrape away excess pieces and the spatula to carefully remove cut images

User questions & answers

Question:	Will these work with the large cricut cake machine, i plan to use it to cut paper not fondant
Answer:	39" = 36"+3" where 36" is 3'
Question:	does the awful chemical smell go away? it's either the plastic or the adhesive used, but something smells terrible on these mats
Answer:	I have this chain and the Kryptonite Fahgetaboutit mini lock and the lock will not fit through the links, it is just a tad bit too thick. However I used a knife to cut away about an inch of the rubber around the end of the lock and I can fit the link just on the edge of the lock
Question:	How often do the mats need to be replaced or how many uses do you get out of single mat (while replacing the clear cover after each use as suggested
Answer:	Yes. Sort of. You can put the end length thru the Cinch Ring and then attach the Abus 37/80 lock on any one length you want. The end, once you attach the abus to a length of chain that is all you can do since the shackle is only 22mm clearance. I tried to fit 2 links in the shackle. It doesn't work with 12mm chain.
Question:	Can I use this mat for my Silhouette Cameo cutting machine
Answer:	To my knowledge no! We just pop the pins in and take the legs off to transport the chair...no big deal... We really like the chair and its options!

Product features

Cricut Cutting Mat Variety 3-Pack

Specially formulated for lightweight materials, the LightGrip mat allows you to easily cut and remove office printer paper, vellum, light cardstock, and more.

StandardGrip mat

The StandardGrip mat is a multipurpose mat that is perfect for a wide range of medium-weight materials, including patterned paper, vinyl, iron-on, and cardstock.

StrongGrip mat

The StrongGrip mat securely holds heavyweight materials such as specialty cardstock, glitter cardstock, chipboard, and fabric with stiffener. It's our longest-lasting mat featuring double-life adhesive technology.

LightGrip

Cardstock

Light Cardstock

Construction Paper

Printable Fabric

Printable Iron-on

Pearl Paper

Printer Paper

Vellum

Vinyl

Washi Sheets

StandardGrip

Glitter Cardstock

Heavy Cardstock

Iron-on

Glitter Iron-on

Flocked Iron-on

Patterned Paper

Embossed Cardstock

Printable Sticker Paper

Window Cling

StrongGrip

Acetate

Adhesive Foil

Chipboard

Craft Foam

Fabric

Fabric with Stiffener

Faux Leather

Felt

Magnet Sheets

Poster Board

Product description

The Cameo cutting mat is intended for use with the silhouette cameo to hold materials in place when sending jobs to The silhouette machine. The mat has a regular adhesive level to hold most cardstock and general material types in place. This mat replaces is the regular cutting mat that is initially included with the cameo machine. Please Note it has come to the attention of silhouette that several sellers do not offer authentic silhouette cutting mats. These sellers include Warwick's sincerity, Pamela Bell, Debbie Alexander, gzqvip, konradina, ibestbrain and Nanette Peterson. If you have purchased from an unauthorized seller, Please return he item to . Authorized retailers include: , swing design, craft direct, craft corner and savings. ****.

• 12-inch by 12-inch cutting area
• Also compatible with: Silhouette Cameo (original), Silhouette Cameo 2, Silhouette Cameo 3

User questions & answers

Question:	Can I use the 12 x 24 cutting mat made for the Cameo machine, with my old Silhouette QuicKuts & What's the diff between Silhouette mat & Cameo mat
Answer:	Hi,I don't think the Cameo and the Silhouette are two different machines. I see only references to the Silhouette Cameo. The Silhouette program I have shows only a 12 x 12 mat but I believe you can cut roll vinyl with the machine. The program lets you scroll way past the mat. It goes to 35 inches. I have the fancier Studio Designer version which has side rulers. I see on Amazon there is a 12 by 24 mat available. I also have a Blackcat Cougar and it has a place to set mat size. The Silhouette mats are rather thin. My Blackcat mats are a lot thicker and more forgiving. My Silhouette now lives at our factory and my Blackcat is at my home. I haven't tried a Black cat mat in the Silhouette. I can't resist in telling you I found a way to redo the stick on the mats. I think the sticky on the Silhouette mat is waterbased so it can be cleaned off with soap and water. When it is clean, dry it off and spray a thin layer of Sprayway (name of manuf) No. 82 mist spray adhesive. Spray it outside or wear a mask. Make sure to let it dry as it can be gooey when wet. Amazon sells this spray stuff. I am absolutely thrilled to be able to keep my mats at perfect stickiness. I can easily remove buildup of the spray adhesive with paint thinner.
Question:	How do you avoid thin paper from sticking to this and tearing
Answer:	I bought 2; 1 was kept very sticky for using with vinyl, etc. The other a crafter shared with me--which worked well, but is up to your discretion. I sprayed the mat down w/ Windex, let sit 5 minutes, rinsed it, & let dry thoroughly and it makes it just mildly tacky. Works great with paper and no lint from the other techniques.
Question:	does this come with one or two mats
Answer:	Just one mat but it lasts for months of cutting. I adore my Silhouette Cameo!
Question:	How do you store you cutting mat? I threw away the blue film that was on it
Answer:	I always keep that mat! But, maybe you could try a piece of parchment paper or get a cheapy plastic placemat from the dollar store to protect the sticky layer of the cutting may.

• Best Value Set - Nothing beats this great value knife set! With a durable 9”x12” cutting mat, a precision knife with 6 unique blade types & 10 replacement blades, this is the most practical knife set you can get. A great gift for any amateur or professional crafter!
• Long-Lasting Craft Cutting Mat - Our 2-sided mat measures 9.5"x12.5" giving you a FULL 9”x12” surface, with precise grid & angle lines. Its 5-ply PVC design can withstand sharp X-Acto knife cuts without losing form
• Versatile Craft Knife Set - Our knife set has 6 unique types of blades for a wide range of cutting needs, be it leathercrafting, carving, stenciling and a lot more. 10 replacement blades ensure you have enough for many projects to come, and each blade fits most X Acto knives for total versatility!
• Precise Cuts For Perfection - This craft knife’s durable yet lightweight rubber-grip handle makes it easy to control every slice, and the cutting mat’s visible & accurate grid lines help deliver perfection in every cut!
• Satisfaction Guaranteed - We've built our products to last. If the quality of our product falls below your expectation, contact us and we'll make things right for you

Product features

THE WA PORTMAN CUTTING MAT & CRAFT KNIFE SET: The Best Crafting Tool Kit Ever

The WA Portman Cutting Mat & Hobby Knife Set is the ultimate duo for all your leathercrafting, stenciling, carving, wallpapering, general cutting needs around the home or office, and a lot more.

VERSATILE FOR A WIDE RANGE OF APPLICATIONS

Our precision 7-piece craft knife set has 6 unique types of blades for a wide range of cutting needs, be it leathercrafting, stenciling, carving, wallpapering, general cutting needs around the home or office, and a lot more.

MAXIMUM PRECISION & CONTROL

Our craft knife handles are made with premium lightweight aluminum and comes with a comfortable rubber grip. Giving you precision and control for all your delicate knife arts and crafts.

INCLUDES 10 REPLACEMENT BLADES

Lots of crafting projects lined up? This reliable hobby knife comes with 10 replacement blades to see you through many great creations down the line.

FLEXIBLE, SAFE & PORTABLE

Each of our blades in this craft knife kit also fits most X-Acto and #1 style knives for extreme flexibility. Moreover, you can organize and easily bring this kit anywhere as it comes in a hinged, container with compartments for safe storTHINGS TO LOVE ABOUT OUR SELF HEALING CUTTING MATS:age and transport

PROVIDES A FULL 9x12-INCH SURFACE

Our cutting mat measures 9.5”x12.5” giving you a FULL 9”x12” grid surface, with ACCURATE 1" and 1/2" grid with 1/8" ruler marks for precise alignment and 45° and 60° angle guides to meet your cutting needs.

DURABILITY THAT PROTECTS

Long lasting, cut after cut because of its 5-ply PVC that’s thick enough to withstand knife cuts and rotary cutter slices. Plus its non-slip bottom ensures protection for your cutting table or workstation.

REVERSIBLE SIDES

The green and black sides are reversible and come with easy to read grid lines in angles, inches and metric measurements on both sides. You can use one side for precise cutting and the other side for free-hand work. Truly the versatile choice for your sewing, crafting, scrapbooking, or quilting projects!

Product description

Silhouette Cameo 4

• The silhouette Cameo 4 is the evolution in desktop cutting. The sleek Backlit touch panel lets you load, unload, and pause your projects in style. Conveniently stored in the machine's compact pull-out drawer is a new built in roll feeder for quickly cutting vinyl and heat transfer material directly from a roll. On the back of the Cameo 4 You will find a built in cross cutter allowing for a clean straight edge cut on your vinyl roll for your next project.
• The Cameo unique dual carriage allows for tool Type detection. The machine's ultra-smart system uses tool sensor technology that detects what tool you are using which then triggers the silhouette Studio software to adjust cut settings automatically.
• The Cameo 4 stands apart from previous models with the new dual motor system, which allows you to cut in two distinct ways. Carriage one provides the Cameo 4 with unparalleled speed. It is operated from a solenoid motor that gives makers smooth and intricate cuts. Cameo 4 can cut or sketch up to 3x faster than previous models without sacrificing accuracy. Carriage two is operated by an entirely different style of motor that allows for unprecedented power.
• The Cameo 4 carriage 2 boasts additional cutting force! With the increased downforce of the Cameo 4, we now offer a new rotary and Kraft blade (Sold separately) that have been specifically designed to operate with the Cameo smart tangential technology. With smart tangential technology the Cameo 4 cuts thicker material without sacrificing quality with each cut. The Cameo 4 offers true mat-less cutting which allows cutting cardstock, paper, and other materials without using a mat.
• The autoblade has been reconfigured especially for the Cameo 4. This second generation autoblade will have a single-tap reset which will reduce the time needed for the Cameo 4 to automatically adjust the blade setting for your project.

User questions & answers

Question:	Can this cut into balsa wood and Mat boards? What blade would I need to use
Answer:	It can only cut 3mm thick materials., so it would have to be very thin balsa wood and mat boards. These materials should be cut using the Kraft blade.
Question:	can i use my own 2mm thick felt? 2) uplaod my own designs? 3) will this require a monthly subscription? 4) is cutting bade i'd need available now
Answer:	Hi Patricia, Here are the answers to each of your questions. (1) The Cameo 4 can cut up to 3mm thick, so your 2mm thick felt should be cut without any problems. (2) There are several file types that Silhouette Studio can import. If you have the basic version of Studio you can import STUDIO/STUDIO3 files, GSD/GST and DXF files. The software can also import image file types (JPG, PNG, BMP, GIF and TIF Files) and then trace the image using an auto-trade function to create cut lines. Upgraded version of Studio software can import additional file types. Silhouette Studio Designer edition can import SVG and PDF files. Silhouette Studio Plus can import embroidery file types, such as PES, DST, EXP, JEF, and XXX files. Our Studio Business Edition add the ability to open Adobe Illustrator and CorelDRAW native files, AI, EPS and CDR. (3) No monthly subscription is required to use and operate the Cameo 4. In the Silhouette Design store you can subscribe to a monthly subscription, we offer many subscription options that best suits your needs. If you choose to not renew the subscription, you will still have access to the designs you previously downloaded. The free 1-month Subscription comes with the purchase of the Cameo 4. Any designs or fonts downloaded during that time are yours to use forever. (4) Yes the blade you would need is available. We would recommend the Rotary blade for cutting felt. Retailers are just receiving them now. We hope you enjoy your new Cameo 4. If you have any additional questions please let us know. The Silhouette Team
Question:	How does this compare to Cricut Maker
Answer:	There are many differences from the Silhouette Cameo 4 that set it apart from other cutting machines on the market. The biggest difference is the power of the Silhouette Studio software. The software is available 24/7 on your computer. It is very easy to use yet very powerful! The basic version comes free with your Cameo 4. The Cameo 4 now comes with a built in roll feeder, which allows you to cut rolled material such a vinyl and heat transfer material. The Cameo can accommodate material 12 inches wide and 10 feet in length. The Cameo, unlike other machines, can cut paperbacked materials without the use of a cutting mat. There is also a built in cross cutter that allows for cutting your rolled materials with a straight edge. The new Cameo 4 now boasts the ability to accommodate the new Silhouette Rotary blade and Kraft blade. With the increased downforce available, the rotary blade and Kraft blade can cut materials that were not previously available to cut with a Cameo cutter. The Rotary Blade for Cameo 4 provides an alternate method of cutting by having the blade roll across your material. This enables you to cut a variety of specialty material—including cotton fabrics, leather, felt, wool, and more—without a special stabilizer backing. The 3mm Kraft Blade for the Cameo 4 allows you to cut specialty craft materials, such as acetate, craft foam, burlap, and leather. The 3 mm depth is designed specifically to take advantage of the increased clearance the Cameo 4 has to cut even thicker materials. Please note the Kraft Blade and the Rotary Blade are sold separately. With the new carriage the Cameo is now on the same level as the Maker. The Cameo 4 is also cheaper by $100 in comparison. The Cameo 4 has a clearance of 3mm, which allows for thicker materials to be cut. The Cameo 4 also has an industry first of cutting many materials without a cutting mat this new feature allows for cutting paper, card stock and other materials without a cutting mat. Overall the Cameo 4 has set the bar higher than any other cutting machine on the market!
Question:	What is in the box
Answer:	Contains: Silhouette CAMEO® 4 Power cable & USB cable 12-inch Cutting Mat AutoBlade Silhouette Studio® software (download) 100 exclusive designs (download) 1-month Silhouette Design Store subscription (available with tool registration)

Product features

Rotary Blade for Cameo 4

The Rotary Blade for Cameo 4 provides an alternate method of cutting by having the blade roll across your material. This enables you to cut a variety of specialty material—including cotton fabrics, leather, felt, wool, and more—without a special stabilizer backing.

The Strong Tack Cutting Mat may be recommended for use with some materials when using the Rotary Blade for Cameo 4.

Product Details:

• Blade Material: Tungsten carbide
• Adjustment Method: None
• Blade Length Range: 1 mm

*Sold Separately

Kraft Blade for Cameo 4

The 3mm Kraft Blade for the Cameo 4 allows you to cut specialty craft materials, such as acetate, craft foam, burlap, and leather. The 3 mm depth is designed specifically to take advantage of the increased clearance the Cameo 4 has to cut even thicker materials.

Product Details:

• Blade Material: Stainless steel
• Adjustment Method: Manual adjustment (turned by hand)
• Blade Length Range: 0.1 mm - 3 mm

*Sold Separately

AutoBlade for Cameo 4

This Silhouette AutoBlade 2 is available exclusively for the Cameo 4. With the AutoBlade, you don’t have to manually adjust your blade! Simply let your machine do all the work for you. The Silhouette Studio software program will provide recommended cut settings for common material types, and you can adjust them in the software as desired. Then, when you send your design to your Silhouette, your machine will automatically adjust your AutoBlade to the blade setting you chose in the software.

Product Details:

• Blade Material: Sintered Tungsten Alloy
• Adjustment Method: Automated adjustment (controlled by software setting and adjusted by machine)
• Blade Length Range: 0.1 mm – 1 mm

Punch Tool for Cameo 4

With the Punch Tool for Cameo 4, you can have the Cameo 4 create weeding points for your vinyl and heat transfer projects. When you insert the Punch Tool into the Cameo 4, the software will prompt you to choose whether you want to weed the negative space (like for a vinyl decal) or the positive space (like for a stencil). Your Punch Tool (Cameo 4) will then go and create weeding points to make weeding vinyl or heat transfer easier and faster.

Product Details:

• Blade Material: Tungsten carbide
• Adjustment Method: None
• Punch Depth: 0.8 mm
• Only compatible with the Silhouette Cameo 4

*Sold Separately

CAMEO 4 with Built In Roll Feeder

The all new CAMEO 4 now features a built in roll feeder. Since select rolled materials (such as vinyl and heat transfer material) have their own backing, they generally do not require a cutting mat and can be fed directly into the Silhouette cutting machine. The Roll Feeder provides an easy and convenient way to hold rolled material as it is being fed into the Silhouette cutting machine, thus allowing you the convenience of cutting longer jobs while properly aligning your material so that it is straight as it feeds through the machine.

Roll Feeder Settings:

• Material Width Settings: 9 inch, 12 inch
• Maximum Roll Diameter: 4.5 inches
• Maximum Material Core Size: 3 inch

Built In Cross Cutter

On the back of the Cameo 4 You will find a built in cross cutter allowing for a clean straight edge cut on your vinyl roll for your next project.

The new built in cross cutter features a rotary style cutter. This new cutter lasts longer and creates the perfect cut each time.

Powerful Software Whenever You Need It

Silhouette Studio software is the most robust and powerful design software for any cutting system on the market. This innovative software is highlighted with features normally found in high-end illustrating software, yet is amazingly simple, easy to use, and absolutely free to Silhouette users. Silhouette Studio gives you countless ways to customize your project.

Have Corel Draw or Adobe Illustrator? For the lost price we have you covered with a Plug-in that allows you to design and cut directly from these programs using Silhouette Connect.

Tool Type Detection

The Cameo 4s unique dual carriage allows for tool Type detection. The machine's ultra-smart system uses tool sensor technology that detects what tool you are using which then triggers the Silhouette Studio software to adjust cut settings automatically.

The Perfect Design for Every Project

The Silhouette Design Store is a marketplace of ready-made shapes for use with your Silhouette. There you will find over 100,000 downloadable designs from dozens of talented artists. Once you’ve purchased a design it is yours to keep and use as much as you want. Build your own personal digital design library to use whenever you want. With the Silhouette Design Store you only pay for the designs you really want—no need for expensive cartridges or access to shapes you’ll never use.

Product description

Fiskars largest Cutting Mat is perfectly sized for cutting full widths of fabric right off the bolt, extra-large fabric squares and long fabric strips. A self-healing mat with measuring grids on both sides gives you a work surface that outlasts other mats. Included bias lines make shape cutting and cutting at angles a breeze.

• Extra-large mat provides ample space for all your fabric-cutting needs
• Self-healing mat provides a cutting surface that lasts longer than others
• Easy-to-read measuring grid on both sides means you can turn the mat over for double the usage
• 30-, 45- and 60-degree bias lines make creating triangle and star shapes easy
• Lifetime warranty

User questions & answers

Question:	I had an Olfa cutting mat and the smell of the mat was present after 1 week. How does this mat compare? Any special tricks used to fight this
Answer:	there wasn't a label that came with my mat, it came packaged in a plastic bag with a bar code on it. This mat isn't one of the gel top mats though, if that's the kind you're worried about.
Question:	Do you need to have a mat big enough for the whole piece you are cutting? If not, how do you deal with cutting larger items and not cut your table
Answer:	Yes, it smells much worse than other self-healing cutting mats that I have purchased. I would not buy these again.
Question:	How are these mats packaged for shipping? I have a delivery person in my area who is not always very careful
Answer:	I just got mine, and it has a very strong chemical odor. So much so I'm wondering if it will dissipate or if I need to return it.
Question:	how do you care for a self healing rotary cutting mat
Answer:	It definitely is! Olfa is way overpriced. I use mine all the time for quilting & love it!

Product features

Long-lasting Durability

Self-healing mat provides a cutting surface that outlasts others.

Stores Small, Cuts Big

Longer cutting surface is ideal for cutting full widths of fabric right off the bolt.

Mistake-free Cutting

Measuring grids on both sides allow for clear readability and doubles the life of the mat.

About Fiskars

Fiskars promotes achievement and self-expression by focusing on easy to use, innovative tools to make gardening, cooking and crafting more enjoyable. The Fiskars brand is part of Fiskars Group, which was founded in Finland in 1649 and has become a leading functional and living products company with a strong brand portfolio including Fiskars, Iittala, Gerber, Wedgewood and Waterford.

Product description

Package include:

3 Pieces cutting mats

Adhesive level:

Strong grip cutting mat

Adhesive area size:

12 inch x 12 inch

Intended for heavy material types:

✔thick cardstock 

✔faux leather

✔glitter cardstock

✔specialty cardstock

✔magnet material

✔chipboard

✔poster board

✔fabric with stiffener

• დ[CUTTING MAT FOR CRICUT]—DIYIT gridded adhesive cutting mat 12x12 is perfect for Cricut Maker, Cricut Explore Air 2, Cricut Explore Air and Cricut Explore One. This 3 pieces cutting mats stickiness area size:12 inch by 12 inch, the entire mat size is:12.99 inch width by 13.95 inch length.
• დ[HELD YOUR DESIGNS NICELY]—These adhesive cutting mat has just the right amount of sticky. When you paste the material on the cutting mats, they would held your designs nicely and released just as easy.
• დ[RECOMMENDED MATERIALS]—This stronggrip cutting mat offer a strong adhesive surface perfect for securing heavyweight materials. These cutting mats can be used for thick cardstock, faux leather, magnet material, chipboard, poster board, fabric with stiffener etc.
• დ[EXCELLENT QUALITY]—DIYIT cutting mats are made of durable non-toxic materials, these mats are durable enough which not easy to break off.
• დ[EXTEND THE LASTING TIME]—Use the scraper to scrape away excess pieces and the spatula to carefully remove cut images. Keep the transparent protective film covering on the cutting mat after use, which will keep stickiness of cutting mats free from scraps and dust.

User questions & answers

Question:	Can this be used for a Silhouette Cameo
Answer:	Mine was in great condition, no scratches, dents, or anything!!
Question:	Do these mats work on older models of cricut
Answer:	2019
Question:	Will this work with a silhouette cameo
Answer:	Regular APPLE software.... Safari, Photos, etc....
Question:	Can these be used with scan n cut
Answer:	Maybe you should contact Schlage. Looking for technical specs from Amazon consumers is a fool's task.