Product description

The Fusion signature Series marine amplifiers are purpose built for the marine environment, boasting some of the most impressive environmental protection available, to deliver a signature performance on the water like never before. The true-marine ms-da12250 will resist corrosion and the incredible 2250 Watt Output (peak) is configurable for 1 ohm impedance, delivering enough power to bring your signature Series subwoofer components to life. The ms-da12250 is a high efficiency 2250 Watt monoblock amplifier design ensures low current draw from the battery. This delivers increased power to the connected subwoofer, taking your audio entertainment experience to new levels. The ms-da12250 incorporates heat-tempered and conformal Coated pcb's for maximum product life Plus the amplifier chassis is a heat Sink; reducing component Core temperature and increasing efficiency. Undeniably a Stand out piece; the stunning stainless steel mirror install panel offers practical confinement of all cable connections and tuning controls, while delivering good looks that complement any installation. Connections include single Channel Output and RCA line-level inputs allow for easy connection to new or existing systems.

• Powerful mono block, specifically for customers that want the sub(s) to hit loud and proud
• Mono block, 1600 Watt, class-d amplifier
• 2250W of peak power to drive up to 2 Fusion signature subwoofers, 2-ohm stable
• 1-Piece heavy-duty die cast chassis, 5-way circuitry protection - thermal/reversed power polarity/DC offset protection/high + low voltage
• FLFC low frequency control-accurate fine tuning of frequency response

Product description

The FUSION AM Series marine amplifiers are purpose-built for the marine environment. Boasting some of the most impressive environmental protection available, they deliver performance on the water like never before. The MS-AM806 is a 24V amplifier, with 6 channels and an impressive 1600 Watt peak power output to ensure clean and powerful amplification of the input signal. Many configuration options are available with the MS-AM806 to help spread the sound around your vessel. Incorporating heat-tempered and conformal coated PCBs for maximum product life, and gold-plated connectors for improved signal flow, the MS-AM806 reproduces clean and powerful audio with enough power to rock the boat. Configuration options available: 3 pairs of speakers (6 speakers) 6 pairs of speakers (12 speakers) wired in parallel at 2 Ohms (2 x 4 Ohm speakers per channel) 1 subwoofer (bridged) and 2 pairs of speakers (4 speakers) 2 subwoofers (4 bridged channels) and a pair of speakers (2 speakers) Features: 24V amplifier 1600 Watts peak power – with multiple configuration options available Class-D amplifier – for high output with low battery drain Conformal coated PCBs – water resistant protection from salt air and moisture FUTRANZ heat sink technology – transfers heat more efficiently and provides more thermal stability with maximum component reliability F.R.A.T (Fusion Regulated Amplifier Technology) – provides enormous power output at low voltage F.I.S.T (Fusion Intercooled Semi-Conductor Technology) – clamps down internal power switching to rapidly remove heat from all associated semi-conductors 1 year limited Consumer Warranty The Fusion AM Series marine amplifiers are the perfect complement to any Fusion marine stereo system.

• This powerful amplifier built for 24V systems will give new life to your music. Its high efficiency 1600W construction ensures low battery drain and excellent sound.
• Provides added protection from salt air and moisture to the PCB ensuring extended product life.
• Thermal / Reversed Power Polarity / DC offset and High and Low voltage protection incorporated into the amplifier design ensures sustained performance.
• Engineered to support a 24 Volt DC voltage usually found in larger vessels.
• Unlimited configuration options are available: 3 pairs of speakers (6 speakers); 6 pairs of speakers (12 speakers) wired in parallel at 2 Ohms (2 x 4 Ohm speakers per channel) ; 1 Subwoofer (bridged) and 2 pairs of speakers ( 4 speakers) ; 2 Subwoofers (4 bridged channels) and a pair of speakers (2 speakers)

User questions & answers

Question:	How should you set the level adjustments
Answer:	You can set it to middle or 3/4 high then adjust the amp's gain from there.
Question:	cant find one of these that has a remote wire. Do they exist on amazon or do i need to go to different site? if they do you dont happen to know the pa
Answer:	I'm wondering the same thing , I'm thinking of using a key hot fuse on the panel .. would work well and only on when key is ..
Question:	My 2013 f150 has the small display radio but what does it mean where it says 2013-2014 F-150 (excluding CD radio/no color screen
Answer:	I have the same truck. Had to move one of the rca wires cause they had it screwed up so it was hooked to one of the front and one rear channels. They need to be both rear.
Question:	When plugging this into my factory radio and hook up an amp does the amp power door speakers as well
Answer:	No, all this adapter does is give you 2 line outputs for an amp or subwoofer. Whether the amp powers the door speakers is going to depend on the amp you have and how you wire it to the car.

• Signature Series Marine amplifiers are designed and engineered for the harsh Marine environment
• A high efficiency 1400 Watt amplifier design which ensures low battery drain with a high output
• This delivers increased power to the connected speakers and/or subwoofers, extending your audio entertainment experience to a whole new level
• 1-piece heavy-duty die cast chassis, 5-way circuitry protection - thermal/reversed power polarity/DC offset protection/high + low voltage

User questions & answers

Question:	Is this a 24 volt amp, or 12 volt
Answer:	I connected this amp to a 12 volt circuit.
Question:	What RMS does it run per channel
Answer:	Don’t waste your money on this, only last me a month, bad customer service, warranty isn’t what it claims, buy quality such as jl or wetsounds
Question:	Can you hook up 2 subs to this amp? No speakers, just 2 subs
Answer:	Yes you can bridge the 4 channels into 2 for subs

Product description

Increase the bass level of your music, or improve all-round sound quality by incorporating a marine subwoofer into your audio system. Engineered for the marine environment and the perfect complement to your Fusion marine audio system. The MS-SW10 has a water resistant design and complies with ASTM standards for UV stability and Salt/fog resistance, ensuring sustained high performance during prolonged exposure to the elements. With 400-watts peak Output, the MS-SW10 will produce crisp and Accurate bass. We recommend you install a Fusion AM402 amplifier to drive our marine 10” subwoofer.

• Magnet structure - 60 oz
• 2" voice coil - 4 ohms - 30hz-2.0Khz - 88Db
• Min. Mounting depth - 4.5" mounting diameter - 8.75"
• Free space resonance: 28Hz, frequency response: 30Hz - 2Khz

User questions & answers

Question:	what is the cut out diameter for this speaker
Answer:	If you click on the manufacturer's specifications, the template and dimensions are specified there. I didn't do the installation so I don't know off the top of my head.
Question:	What is the warranty on this speaker
Answer:	To my understanding Fusion offers 1 year; although I never had any of the 5 speakers last a year. Amazon replaced them no questions asked; very impressive. I grew tired of them going out & having to change them out so I shelled out the extra $ & got the best marine speaker made, JL.
Question:	How much does the protude from from the surface it is mounted to onto into the boat
Answer:	Min. Mounting depth : 4.5"
Question:	how Does an subwoofer work on an work boat
Answer:	Excellent speak for your boat. Sounds great with no vibration.

Product description

The Fusion signature Series marine amplifiers are purpose built for the marine environment, boasting some of the most impressive environmental protection available, to deliver a signature performance on the water like never before. Introducing our most efficient, stunning and powerful marine amplifier. The true-marine sg-da51600 will resist corrosion and the incredible 1600 Watt Output (peak) will power 4 speakers and 1 subwoofer with ease. The sg-da51600 is Fusion's first 5 Channel Class-D Hi-Fi marine amplifier; the key benefit of a Class-D amplifier is low battery drain with a high Output, making this the perfect amplifier for the marine environment. The sd-da51600 has conformal Coated pcb's for maximum product life and performance Plus the amplifier chassis is a heat Sink; reducing component Core temperature and increasing efficiency. Undeniably a Stand out piece; the stunning stainless steel mirror install panel offers practical confinement of all cable connections and tuning controls, while delivering good looks that complement any installation. Outputs include subwoofer Plus four speaker channels for zone 1 and zone 2. RCA line-level inputs allow for easy connection to new or existing systems.

• Powerful, rock-the-boat sound! 1600 watts of class D output run the speakers and sub off of One powerful amp
• 5-Channel, 1600 Watt, class D amplifier and frequency response is 10Hz - 50kHz
• Can amplify up to 4 pairs on Fusion speakers (speakers run in parallel on channels) and the ms-sw10 Fusion subwoofer
• 1-Piece heavy-duty die cast chassis, 5-way circuitry protection - thermal/reversed power polarity/DC offset protection/high + low voltage

Product description

Dual variable high/low electronic crossover & bass boost. Power on LED indicator. LED protection indicator. Blue LED level display. Tri-mode configurable. Dim: 2.7"H x 12"W x 10.9"D. 4 channel. 1,000W. 250W x 4 @ 4_. The Waterproof Marine Bridgeable MOSFET amplifiers extends the Pyle tradition into a totally new series of amps, designed from the ground up to deliver the power, performance and flexibility the modern car audio enthusiast demands. The PLMRA420 features 4 channels and 1000 watts of power.

• 4 CHANNEL BRIDGEABLE AMPLIFIER: Pyle’s PLMRA420 is engineered as a 4 Channel bridgeable marine amplifier that powers up your speaker and is universally compatible. It also has high and low electronic crossover network or pass filters
• PREMIUM RCA INPUT: For an easier use of this hydra marine amplifier, it comes with premium RCA inputs. If your marine receiver lacks RCA output jacks, you can connect speaker output leads to the high level inputs
• SHORT PROTECTION: Built with a heavy duty Aluminum Alloy heatsink, thermal overload speaker short protection and LED light indicator. These are to protect the amp and your vehicle's electrical system from short circuit conditions
• POWERFUL 1000 WATT: This amplifier is powerful with its 1000 WATT maximum and dual MOFSET power supply. Comes with dual adjustable input GAIN level controls of 10k Ohm (Low) and 100 Ohm (High) speaker impedance
• MARINE GRADE: With its Marine rating of IP-01, it is waterproof ready. It’s constructed with gold plated speaker output terminal connectors as well to combat corrosion with long term use
• Waterproof four-channel, bridgeable MOSFET power amplifier with 4 x 250 Watts maximum output
• Variable high- and low-pass filters with crossover mode selector

User questions & answers

Question:	Can you tune every channel or does it tune both channels in the bridgeable channels
Answer:	Yes just press FN+ESC To switch modes/turn off.
Question:	Does this 1000 watt unit comes with 4 RCA plugs, to plug a radio/tuner into this amp
Answer:	K1 pink has 7 colors backlight: blue, red, green, pink, cyan, yellow and white. If the product you received is defective, please contact us to solve your problems and we would like to send you a replacement or refund.
Question:	Can I push 6 speakers and a 8" subwoofer with this amp
Answer:	It depends on the color of the product you choose. K1 white / K1 black stays rainbow color. K1 pink has 7 colors backlight ( not rainbow), and pressing Fn + tab can change it to solid color.
Question:	Is this amp good for a 2 ohm load when bridged
Answer:	Hold down the FN key then hit the ESC key to cycle through the options. There’s 4 bright, dim, pulse, and off

Product description

Shift your audio experience up a gear with the Boss Audio Riot R1100M Class A/B Monoblock Amplifier. This powerful 2-Ohm stable amplifier features 1100 Watts Max Power with a MOSFET power supply to rock your tunes. Customize the sound with Variable Low Pass Crossover and Bass Boost. Tweak the Bass and feel the vibes with the Remote Subwoofer Control. Amplifiers in the Riot Series are perfect for first time car audio buyers looking to add Bass, enhanced sound and performance to their system at an affordable price. Drive up the beat with the Boss Audio R1100M.

For further product details, please scroll down.

• Installation - Connect Power/ground to the closest point of chassis of the vehicle. Keep ground wire less than 39” (100 cm) in length. Use 8 gauge or heavier wire. A Mobile Electronics Certified Professional is recommended for installation & safety
• Power - Maximum Power Output of 1100 Watts at 2 Ohms into one channel. Max power output of 550 Watts at 4 Ohms into one Channel. This amplifier is designed to run your subwoofer(s) giving them the power that they need to perform as they were meant to
• High Level Inputs - Speaker level inputs are commonly referred to as high-level inputs. Speaker level inputs will be used to connect the R1100M to your factory radio or an aftermarket radio that does not have low-level (RCA) inputs
• Low Level Inputs - Line level inputs, also known as RCA inputs or low-level inputs, use RCA interconnect cables to link the R1100M with the source unit. Most aftermarket radios have multiple pairs of RCA outputs that can connect to multiple amplifiers
• Low Pass Crossover - A low-pass filter is an electronic circuit that removes all the notes below the filter's frequency setting. You will use the Low-pass filter to primarily keep high notes out of your subwoofer(s)
• Variable Bass Boost - Variable Bass Boost allows you to adjust the low bass within the boost range to just the way you like it
• Specs - Dimensions: 9.1” x 0.4” x 2.3”, It can be installed in a variety of different places due to its’ slim and compact design, Weight: 4.43 Lbs. Amplifier Car Audio. Monoblock amplifier
• Warranty - BOSS Audio Systems provides a powerful 3-year Platinum Online Dealer Warranty so long as the purchase is made through Amazon.com. We strongly encourage professional installation of this product to ensure proper and safe functionality

Product features

Boost your Bass

Ramp up the bass with the Boss Audio Riot R1100M Class A/B Monoblock Amplifier. With 1100 Watts Max Power and MOSFET power supply, this amplifier takes your vehicle's audio system to the next level. Customize the sound with Variable Low Pass Crossover, Bass Boost and Remote Subwoofer Control. Amplifiers in the Riot Series are perfect for first time car audio buyers looking to add bass, enhanced sound and performance to their system at an affordable price.

MOSFET and Class A/B

Metal Oxide Semiconductor Field-Effect Transistors quickly switch from full to non-conduction for high-efficiency output.

Our Class-A/B amplifiers feature specific linear circuitry that increases sound quality and power output while reducing distortion and improving efficiency.

2 Ohm Stable and High and Low Level Inputs

2-Ohm stable comfortably powers speakers or subwoofers when in use at 2-Ohms, resulting in more power and volume.

High-level inputs accept speaker output signals and low-level inputs accept pre-amp output signals to allow for the addition of amps and processors to standard factory or aftermarket source units.

Variable Low Pass Filter

Variable low-pass filter gives you control over the frequencies that pass through to the subwoofer.

Switchable Bass Boost

Switchable Bass Boost allows you to boost the low bass +18db.

Subwoofer Level Control

A wired remote lets you easily control the subwoofer level for customized output and superior sound.

Short Protection

Automatic shut-off protects the amplifier if it gets too hot or if speakers fail causing a short.

Variable Input Control

The Variable Input Control allows the amplifier input to match the output signal from the head unit to achieve optimum performance when adjusted properly.

Illuminated BOSS Logo

The BOSS logo is backlit in a cool blue on this Riot Series Amplifier.

Product description

Introducing an impressive new addition to Fusion’s Signature Series marine amplifier range: the SG-DA82000. Our most efficient, stunning and powerful marine amplifier, the SG-DA82000 also features a True-Marine design that will resist corrosion. Its incredible 2000 Watt peak power will power up to 8 pairs of speakers at 2 Ohms (2 x 4 Ohm speakers per channel in parallel) or up to 4 pairs of speakers at 2 Ohms (2 x 4 Ohm speakers per channel in parallel) and 2 subwoofers. The SG-DA82000 is Fusion's first 8 channel, Class-D Hi-Fi marine amplifier. The key benefit of a Class-D amplifier is that it has a low battery drain with high output, making this the perfect amplifier for the marine environment. The SG-DA82000 also has conformal coated PCBs for maximum product life and performance, plus the amplifier chassis is a heat sink, to reduce component core temperature and increase efficiency. Specifications: Frequency Response 10 Hz to 40 kHz (-3 dB @ 4 Ohm rated power) Peak Power Output 2000 W Rated Power Output (4 Ohm) 100 W rms x 8 @ 14.4 V input < 1% THD+N (EIA/CEA-490A) Rated Power Output (2 Ohm) 140 W rms x 8 @ 14.4 V input < 1% THD+N (EIA/CEA-490A) Rated Power Output (4 Ohm Bridged) 280 W rms x 4 @ 14.4 V input < 1% THD+N (EIA/CEA-490A) Input Sensitivity 0.3 V to 8 V rms, user adjustable Input Impedance 7k Ohm nominal High-Pass/Low-Pass Full Range Filter Yes, user selectable Filter Cross-Over Frequency 32 Hz to 320 Hz, user adjustable Filter Cross-Over Slope 12 db/octave Bass-Boost 0 to 9 dB, user adjustable (zone 2/4 only) Current Consumption (Standby) < 1 mA @ 14.4 V input Current Consumption (Idle) < 2.5 A @ 14.4 V input Current Consumption (Max) 100 A @ 14.4 V input Fuse Rating 4 x 40 A ATC Blade-Type (SAE J1171 Compliant) Operating Temperature Range 0 to 50°C (32 to 122°F) Ingress Protection Rating Dry area installation only Weight 5.20 kg with cover or 11.5 lb with cover

• Class-D Amplifier Technology - The highly efficient Class-D design provides 2000-Watts peak power whilst drawing less current than a standard Class-AB amplifier. This design provides increased efficiency and power output to your speakers, letting you enjoy your music for longer.
• 2000 Watts Peak Power – With a peak power of 2000 watts, you can easily power up to 8 pairs of speakers or up to 4 pairs of speakers with 2 subwoofers.
• Marine-Ready Design with Conformal Coated PCBs - Extending the life of your amplifiers, the Signature Series are designed specifically for marine use with conformal coated PCBs to provide extra protection from the marine elements.
• Rigid Aluminum Alloy Heat Sink - Molded to form a singular die-cast chassis, the fin layout is calculated with precision to increase the surface area of the heat sink and improve heat dissipation.
• Zone Designation - To align with the Fusion entertainment system zone philosophy, the input and output connections are labelled as zones.

Product description

8 Gauge amplifier installation kit includes:

• 20 Foot / 8 Gauge Red Power Cable, High Quality Competition Fuse Holder
• 3 Foot - 8 Gauge Black Ground Cable
• 16 Foot / 18 Gauge Blue Turn-On Wire, 30 Foot / 16 Gauge Speaker Wire
• 20 Foot High Performance RCA Interconnect, 6 Foot Split Loom Tubing
• (20) 4" Wire Ties, Rubber Grommets
• 5/16" Ring Terminals, 1/4" Ring Terminals, Speaker Terminals

User questions & answers

Question:	does the fuse holder come with a fuse installed or do i need to pick one up and if so what kind
Answer:	It comes with the fuse holder and the fuse you have to install it but that's simple to do just install it about 6inches from the battery :)
Question:	What gage is the speaker wire
Answer:	The speaker wire in my kit was 16 gauge, I was hoping for at least 12 gauge.
Question:	How long is the rca patch cable
Answer:	20 feet gold rca cable. It's long enough for me:)
Question:	how many watts
Answer:	8 Guage can only handle a few hundred watts or so RMS. You might be able to get a 5-channel system that uses 700W RMS to be properly powered BUT that's probably right around the peak for this gauge of wire. That being said, BOSS WILL NOT WORK FOR THAT. Boss uses garbage materials and typically only deliver 1/3 of what they say they are delivering. I've seen the tests with my own eyes with wiring and amps and they fall apart. Don't wire anything more than 100W RMS or so total with this kit or you might melt it.

Product features

KIT2 Includes

Product description

Pyle Model : PLMRMP4A

Waterproof Rated Marine 4-Ch. Amplifier

4-Ch. Waterproof Rated Marine Amplifier Kit, Marine Grade Amp, AUX/RCA/MP3 Audio Input (1200 Watt MAX)

Features:

4-Channel Marine Audio Amplifier

Marine Grade Rugged Construction

Waterproof Rated & Weather-Resistant Connectors

Integrated Power Wiring Harness

Perfect for Custom Installations & Applications

Ability to Connect & Stream Audio from External Devices

Wired RCA/AUX Audio Input

Speaker Wiring Connectivity

Anti-Thump Turn-On

Soft Turn On / Off

Overload & Power Protection Circuitry

Used for Watercraft & Portable Mobile Vehicle Sound Systems

What’s in the Box:

Compact Marine Amp

RCA-to-Aux (3.5mm) Cable

Aux (3.5mm) Audio Cable

Technical Specs:

Power Output: 1200 Watt MAX

4 x 150 Watts RMS 4 Ohm

4 x 300 Watts MAX 4 Ohm

4 x 300 Watts RMS 2 Ohm

Marine Grade IP-65 Rating

T.H.D: 0.1%

S/N Ratio : > 95 dB

Channel Separation : > 65 dB

Frequency Response : 10 - 40kHz

Fuse: 10A

Power: DC 12V

Amp Dimensions (L x W x H): 6.2’’ x 3.5’’ x 2.1’’ -inches

The Pyle Marine Amplifier Kit provides waterproof rated sound for all seasons! Compact amp size and high-power output allow for hassle-free audio processing in a wide variety of mobile applications -- including car, boat and marine watercraft sound systems. Integrated power and speaker wiring make this amplifier kit perfect for custom audio setup installations, while the marine grade IP-65 amp rating adds additional protection and water resistance. Once connected, you will have the ability to plug-in and stream audio from all of today’s latest devices (like smartphones, tablets and laptops). Enjoy convenient music streaming from a universal mount audio system with the Pyle Compact Marine Amplifier Kit.

• WATERPROOF & WEATHERPROOF: The audio amplifier is waterproof with its marine grade rating of IP-65. It has a rugged construction and integrated power wiring harness to combat weather conditions
• POWERFUL 1200 WATT: This amplifier receiver is powerful with its 1200 watt max. It has an anti-thump turn on and soft turn on or off to save energy. Comes with 2 to 4 Ohm speaker impedance and adjustable volume control
• 4 CHANNEL AMPLIFIER: Pyle’s PLMRMP4A is engineered as a 4-channel marine amplifier that powers up any boat stereo speaker and is universally compatible too. It has wired RCA, AUX and MP3 audio input
• SHORT PROTECTION: Built with a heavy duty heatsink, thermal overload speaker short protection to protect the amp and your vehicle's electrical system from short circuit conditions. It has 12V DC and 10A fuse
• COMPACT AND LIGHTWEIGHT: The amp is compact with an exact dimension of 5.3’’ x 3.5’’ x 2.1’’ and lightweight with only 1.94 lbs. The T.H.D is 0.1%, S/N Ratio is > 95 dB, channel separation is > 65 dB and the frequency response is 10 - 40kHz

User questions & answers

Question:	The red power wire still draws current with blue wire turned off. Volume control is also all the way down. Is this supposed to be like that
Answer:	the red wire will always be hot. the blue wire acts as switch. in the absense of a blue wire(ant. on) wire the blue must be attached to power. leaving the unit on all the time.
Question:	Is this amp compatible with 2015 Street glide stereo
Answer:	Hi, it can be wired to any stereo that has line level RCA or 3.5mm audio outputs. Please check if your street glide has line-level stereo audio outputs. Thank you.
Question:	I have hooked my amp up through a toggle switch to terminate all power to this unit when not in use. It still drains my battery
Answer:	Maybe, you have not pass troigh the sicwht the blue wire, wich is the remote wire I hope to help you with this answer
Question:	I have a constant humming don't know where it's coming from, checked all wires
Answer:	what you are hearing is called harmonic distortion, you have mounted the amp to close to a electrical device and need to remount the amp elsewhere. the unit is picking up the electrical waves causing the "Humm" sound you hear.

Product features

4-CHANNEL WATERPROOF RATED MARINE AMPLIFIER

The Pyle Marine Amplifier Kit provides waterproof rated sound for all seasons! Compact amp size and high-power output allow for hassle-free audio processing in a wide variety of mobile applications - including car, boat and marine watercraft sound systems. Integrated power and speaker wiring make this amplifier kit perfect for custom audio setup installations, while the marine grade IP-65 amp rating adds additional protection and water resistance.

4 CHANNEL AMPLIFIER

Pyle’s PLMRMP4A is engineered as a 4-channel marine amplifier that powers up any boat stereo speaker and is universally compatible too. It has wired RCA, AUX and MP3 audio input

CONNECT & STREAM AUDIO FROM EXTERNAL DEVICES

A waterproof stereo 3.5mm to RCA adaptor for plugging in virtually any audio source, including your iPod or other MP3 player.

WATERPROOF & WEATHERPROOF

The audio amplifier is waterproof with its marine grade rating. It has a rugged construction and integrated power wiring harness to combat weather conditions

POWERFUL 1200 WATT

This amplifier receiver is powerful with its 1200 watt max. It has an anti-thump turn on and soft turn on or off to save energy.

COMPACT AND LIGHTWEIGHT

Lightweight marine amplifier with only 1.94 lbs.

DIMENSIONS

This Marine Amplifier has a 6.2 inches Length, 2.1 inches Width and 3.5 inches Height

Product description

Introducing an impressive new addition to Fusion’s Signature Series marine amplifier range: the SG-DA61500. One of our most efficient, stunning and powerful marine amplifiers, the SG-DA61500 also features a True-Marine design that will resist corrosion. Its incredible 1500 Watt peak power will power up to 6 pairs of speakers at 2 Ohms (2 x 4 Ohm speakers per channel in parallel) or up to 4 pairs of speakers at 2 Ohms (2 x 4 Ohm speakers per channel in parallel) and 1 subwoofer. The SG-DA61500 is Fusion's first 6 channel, Class-D Hi-Fi marine amplifier. The SG-DA61500 also has conformal coated PCBs for maximum product life and performance, plus the amplifier chassis is a heat sink, to reduce component core temperature and increase efficiency. Frequency Response 10 Hz to 40 kHz (-3dB @ 4 Ohm rated power) Peak Power Output 1500 W Rated Power Output (4 Ohm) 100 W rms x 6 @ 14.4 V input < 1% THD + N (EIA/CEA-490A) Rated Power Output (2 Ohm) 140 W rms x 6 @ 14.4 V input < 1% THD + N (EIA/CEA-490A) Rated Power Output (4 Ohm Bridged) 280 W rms x 3 @ 14.4 V input < 1% THD + N (EIA/CEA-490A) Input Sensitivity 0.3 V to 8 V rms, user adjustable Input Impedance 7k Ohm nominal High-Pass/Low-Pass Full Range Filter Yes, user selectable Filter Cross-Over Frequency 32 Hz to 320 Hz, user adjustable Bass-Boost 0 to 9 dB, user adjustable (zone 3 only) Operating Voltage 10.8 V to 16 V dc Remote Switch-On Yes - 6 V threshold Current Consumption (Standby) < 1 mA @ 14.4 V input Current Consumption (Idle) < 2.5 A @ 14.4 V input Current Consumption (Max) 75 A @ 14.4 V input Fuse Rating 3 x 40 A ATC Blade-Type (SAE J1171 Compliant) Operating Temperature Range 0 to 50°C (32 to 122°F) Ingress Protection Rating Dry area installation only Dimensions 420 mm (L) x 210 mm (W) x 57 mm (H) or 16-9-16" (L) x 8-1/4" (W) x 2-1/4" (H) Weight 5.15 kg or 11.35 lb with cover

• Class-D Amplifier Technology - The highly efficient Class-D design provides 1500-Watts peak power whilst drawing less current than a standard Class-AB amplifier. This design provides increased efficiency and power output to your speakers, letting you enjoy your music for longer.
• 1500 Watts Peak Power – With a peak power of 1500 watts, you can easily power up to 6 pairs of speakers or up to 4 pairs of speakers with a subwoofer.
• Marine-Ready Design with Conformal Coated PCBs - Extending the life of your amplifiers, the Signature Series are designed specifically for marine use with conformal coated PCBs to provide extra protection from the marine elements.
• Rigid Aluminum Alloy Heat Sink - Molded to form a singular die-cast chassis, the fin layout is calculated with precision to increase the surface area of the heat sink and improve heat dissipation.
• Stainless Mirror Finish - The polished stainless-steel control panel cover conceals and protects all cable connections and settings controls whilst providing an attractive finish to complement any installation.

User questions & answers

Question:	I have a 2015 F150 xlt with small screen original radio will this harness work
Answer:	Yes, remember it plugs in at the bottom behind the cd player
Question:	I have a 2016 f150 xlt with the touchscreen and sync 3. It is not a sony system. I really need to know if this will work for my truck
Answer:	I have a 2015 Xlt touch screen it worked for me basically plug and play. It’s bulky and takes a lil work getting it fit right behind the stock radio
Question:	Will this work in a 2016 ford focus st? Not sure if the st has a diff radio from other years
Answer:	I am not sure about you specific vehicle I put mine in a 2018 Ford F-150 xlt and it works great sorry I couldn’t answer your question.
Question:	Ford Edge with nav ( big touchscreen ) Yes or No
Answer:	There’s a compatibility list in the description but it should fit

Product description

Enjoy high-performance low-end frequencies and enhanced aesthetics with the Fusion® XS Series 10" sports marine subwoofer with RGB lighting. Incorporating high-quality materials and enhanced environmental protection – this subwoofer is designed to add another dimension to your on-water audio entertainment experience. The XS Series 10" sports marine subwoofer with RGB lighting features an injection-molded polypropylene cone, large diameter voice coil and an high-quality basket construction – producing 600-watts of peak power. True-Marine™ accredited, the XS Series subwoofers comes with a 3 year limited consumer warranty.

• Injection-molded polypropylene cone produces defined, high-resolution low frequencies from the excellent self-damping and bass reproduction
• Large diameter voice coil delivers an increase in real power and efficiency, providing a truly high-quality sound experience
• High-quality basket construction delivers enhanced durability when exposed to the harsh marine environment
• Experience multicolor RGB LED lighting to enhance your onboard entertainment experience
• IP65 rating for protection against dust and water ingress with True-Marine accreditation and a 3 year limited consumer warranty

User questions & answers

Question:	What color grill comes with the speaker
Answer:	White, black and silver