8 best etching supplies

Etching supplies are essential tools and materials used in various artistic and crafting processes, particularly in the field of printmaking and metalworking. These supplies enable artists and craftsmen to create intricate designs, patterns, and textures on various surfaces like paper, glass, metal, and more. Here are some common etching supplies and their uses:

Etching Plates: Etching plates are typically made of metal, such as copper or zinc.Artists use these plates as the base surface for their etching designs. Copper plates are commonly used in traditional intaglio printmaking, while zinc plates are preferred for some specific techniques.
Etching Needles and Tools: Etching needles and various specialized tools are used to incise or scratch the design onto the etching plate. The type of tool depends on the desired effect and the material of the plate.
Acid: Acid, such as nitric acid or ferric chloride, is used to bite into the metal plate, creating the actual etching. It eats away at the exposed areas of the plate that have been scratched or protected by an etching ground.
Etching Ground: Etching ground is a protective coating applied to the metal plate to protect the areas that the artist wants to keep untouched by the acid. There are different types of etching grounds, including hard ground and soft ground, each with unique properties.
Inking Supplies: Inks and brayers (rollers) are used to apply ink to the etched plate once the design is complete. The ink is worked into the incised lines and wiped off the surface, leaving ink only in the etched grooves.
Presses: For printmaking, a printing press is required to transfer the inked image from the etched plate onto paper or another material. Printing presses vary in size and complexity, but their primary function is to apply consistent pressure to achieve a high-quality print.
Safety Equipment: Working with acids and certain chemicals requires safety precautions. Artists should use protective gear like gloves and goggles to ensure their safety.
Paper and Printmaking Supplies: Depending on the type of etching, different types of paper may be used, along with various printmaking supplies like blankets, felts, and press boards to achieve the desired print quality.
Cleaners and Solvents: Solvents and cleaning agents are used to remove the etching ground and ink residue from the plate after printing, preparing it for the next print.
Resins and Aquatint: Resins and aquatint powders are used to create tonal effects in etchings. These materials are dusted onto the plate and melted to create a textured surface that holds ink.

These etching supplies are crucial for artists and craftsmen to experiment with different techniques and create unique works of art. The choice of supplies and techniques can vary depending on the artist's style, preferences, and the type of etching they wish to create.

Below you can find our editor's choice of the best etching supplies on the market

Glass Etching Kit with Cream, Reusable Stencils, Brush, Applicator, Cutter, Gloves + Free How to Etch CD

Based on 74 reviews Check latest price

Product description

GET A BETTER GLASS ETCHING EXPERIENCE!

Now you can make elegant etched glass projects with the our "STATE OF THE ART" GLASS ETCHING CREAM. Use the included assortment of reusable and intricate glass etching stencils or make your own for a more personalized look.

GREAT ETCHED GLASS RESULTS: DIY & FEEL CRAFTY

Imagine you now being able to etch elegant designs into nearly any type of glass.

Etch into cups, mugs, wine glasses & bottles, jars, windows, candles and more! Discover the quick & easy process of our glass etching cream and kit. Enjoy etching with both types of stencils and get everything included for etching designs into glass for a lower price.

ULTIMATE GLASS ETCHING KIT WITH EVERYTHING INCLUDED

You can now feel satisfied having everything you need to get started in one package. Includes:

- 2.8 oz of our powerful glass etching cream

- 60+ glass etching stencils (reusable & one-time use types)

- Brush

- Applicator

- Hobby knife

- Cut Your Own Stencil Sheet

- Practice GLASS

- Reusable Gloves

- Illustrated instructions with free ebooks on CD-ROM

100% SATISFACTION GUARANTEE:

We offer a 90 days money back guarantee.

ULTIMATE GLASS ETCHING KIT: Includes everything you need to make perfectly etched & personalized glasses yourself! get started quickly & easily now with reusable stencils!
REUSABLE & INTRICATE GLASS ETCHING STENCILS: Containing over 60 glass etching stencils, you can now learn how to use both of our self-stick stencil types: 17 reusable adhesive-backed Over n' Over stencils (red) and 45 of the more intricate Rub N' Etch stencils (blue).
EVERYTHING INCLUDED: Includes 2.8oz glass etching cream, instructions, a piece of 3" x 3" glass square for practicing, reusable protective gloves, applicator Stick, blank vinyl stencil 3" x 3" sheet for cutting your own designs, stencil cutter hobby razor knife, & a camel hair brush.
Detailed Instructions + Free How to Etch ebook & Patterns on CD-ROM. Feel Creative & have fun by exploring project ideas in our free ebooks.
100% SATISFACTION GUARANTEE - please contact us if you are not satisfied or if there is anything wrong.

User questions & answers

Question:	Does it include letters as part of the stencils? If so, what font
Answer:	USA. Thanks!
Question:	Where is this product made
Answer:	You will receive a pack of 100 Door Knob bags.
Question:	how many do you get
Answer:	I don’t know what an A4 is sorry
Question:	Would it fit an A4 paper folded in half
Answer:	Hi, Those bags are not acid free. Thank you
Question:	Is this bag acid free
Answer:	1.0 mil thickness :)
Question:	what is the thickness of the bags
Answer:	Works great with my joy mangano slimline hangers. Not loose at all fits well.

Jack Richeson Clear Carve 36 Pack Etching Plate 5" x 7"

Jack Richeson

Based on 3 reviews Check latest price

Product description

Clear Carve Etching Plates are .030"/.75mm thick clear PETG. These non-porous, transparent printmaking plates are excellent for dry point, monotype, and calligraphy. Smaller sizes come in packs of three with the 22" X 30" sold as eaches. For convenience we have a 36 pack in the 5" X 7" size.

Non-porous, transparent printmaking plates
Excellent for dry point, monotype, and calligraphy
Clear carve etching plates are .030/.75mm thick clear PETG

User questions & answers

Question:	Can you carve on them
Answer:	Yes

OMTech 150W Digital Laser Power Supply with Real-Time Data for CO2 Laser Engravers and Laser Cutters Substitute Replacement 150W Power Supply for Laser Engraving Cutting and Etching Machines

Based on 9 reviews Check latest price

HIGH PERFORMANCE: OMTech's 150W laser power supply delivers excellent performance with greater than 90% efficiency and fast sub-1ms response times. Get the most out of your laser tube with our safe, stable, and capable power supply!
REAL-TIME LCD DISPLAY: The built-in LCD conveniently provides the output current's amperage as well as the status of the laser and its water protection system, so you can easily monitor your laser engraver. The separate TEST button also speeds fault detection, so you can troubleshoot any system problems with ease.
SIMPLE INSTALLATION: Each connection port is clearly labeled to facilitate quick and easy installation, and the connector boxes from similar models easily plug in directly.
OPEN-CIRCUIT PROTECTION: A protection circuit combined with a well-grounded enclosure ensure our power supply properly handles open-circuit faults and increases the service life of our power supply and your laser tube.
SATISFACTION GUARANTEED: OMTech's laser power supplies have been rigorously tested to provide the highest quality and efficiency on the market. We further back this retrofit laser engraver accessory with our usual strong warranty and friendly 24/7 customer service, ensuring that you’ll enjoy its use for years to come!

User questions & answers

Question:	Im looking for a 50 watt laser to go with omt power supply
Answer:	No
Question:	will you need usb key
Answer:	Yes.
Question:	Will this power supply alow for a seperate test fire button to be wired in.? (From my control panel
Answer:	Hello, at the moment it included only capital letters of an Old English type font.

Product features

Your Laser Power Supply Expert!

OMTech is a long-time leader in the laser engraver industry thanks to our dependable, high-performance, and cost-effective engravers and accessories. Provide reliable and efficient power to your machines with this 150W digital laser power supply: Enjoy quick response times, the built-in LCD display, and easy dependable use thanks to the simple TTL control and open-circuit protection.

LCD Display

Receive real-time feedback on your laser's power and protection systems from the built-in LCD display. Increase your laser's service life and get the most out of it with our safe, stable, and capable power supply.

Simple Installation

Each connection port is clearly labeled to facilitate quick and easy installation. The power supply also comes with a physical TEST button for fault detection, so you can troubleshoot with ease.

Wide Application

This laser power supply is compatible with most 150W and lower laser tubes on the market, so your machine can enjoy better and more efficient engraving and cutting than ever before!

Armour Etch 15-0200 Etching Cream, White

Armour Etch

Based on 7 reviews Check latest price

Product description

Armour Etch is a fast acting specially formulated glass etching compound that lets you create permanently etched designs on windows, mirrors and household glassware. Create your own custom glass etching stencil or use a pre made stencil like Rub N Etch, Over N Over or Peel N Etch. This unique glass etching system allows anyone to personalize and decorate glass or mirrors in minutes with no previous experience. Try it, you will love it. Not intended for use by children. Will NOT etch Pyrex or plastics. NOT recommended for etching large solid areas of glass.

PLEASE NOTE: Armour Etch Cream is sold by Net Weight. Your bottle contains the 10 ounces of product that is listed. You will find an empty space at the top of the bottle. The bottle is factory filled that way with 1.5 inches at the top of the bottle empty.

Package length :2.47"
Package width :2.47"
Package height :4.82"
Made in United States

User questions & answers

Question:	Does this work on piedrafina marble
Answer:	I've used it on dark grey slate with good results and also a ceramic mug. The mug was black so it produced a nice effect. If your marble is light colored, it might etch, but probably won't show well.
Question:	What could I use to print on to create my own stencil that will stick strong enough to glass to avoid bleed but can be removed easily after etching
Answer:	If you are good with a fine paintbrush here's what I did. Before I went into teaching I made a pretty good living etching on glasses and bottles. I drew the pictures on scraps of paper, then attached the paper to the inside of the glass with removable glue (like rubber cement or school stick glue) and painted the etching solution onto the glass where I wanted it to etch. I really liked the effect because the deeper etches were put on first and then I built out to thin layers. It was a great shading effect.
Question:	will this work on Pyrex? I know the description said it won't but I am wondering if anyone has tried it. thanks in advance
Answer:	Pyrex 9x13 was one of my first projects and it's beautiful...which created my addiction to glass etching. I have used the two kinds of pie plates, and several different casserole dishes. It does state that the etching cream does not work on Pyrex, but so far everything has come out great! I actually watched YouTube videos on it.
Question:	how much area does a 10 oz bottle cover
Answer:	Dear Kiatin,I have two bottles each 10 ounces. For the past six months, I opened one, and used this for etching many bottles and glasses. I see the level of the content in the opened bottle barely dropping. I can only assume, that one bottle goes a long, long way!

Armour Etch 15-0250 Etching Cream, White

Armour Etch

Based on 1 reviews Check latest price

Product description

Armour etch is a Fast acting specially formulated glass etching compound that lets you create permanent etched designs on windows
mirrors and household glassware. Create your own custom glass etching stencil or use one of our pre-cut stencils. This unique glass etching system enables anyone to personalize and decorate glass or mirrors in minutes with no previous experience.
Designs are permanent
Etched designs are dishwasher safe
Not intended for use by children
Will not etch Plastics or some Pyrex

User questions & answers

Question:	Can you use vynal to make you templates, or does it need to be a certain matreial
Answer:	Yes, but if you are trying to etch large areas of glass, or are frosting the glass, etching solution will leave a splotchy look. Use window film in frosted to achieve a uniform look.
Question:	Is this 22-ounce enough to sketch an entire glass window the size of a door
Answer:	It says on their website that it's not recommended for etching large, solid areas of glass. I think you may be better off looking into frosted spray paint.
Question:	I want to etch whole pieces of glass 2'x1.5' about 8 pieces. Will this bottle work? Any suggestions
Answer:	You can reuse the cream over and over, so one should do it. I put the cream heavy on the stencil, and when the time is up, I brush it back up and scrape it back into the container. I don't think I will ever use this whole bottle!
Question:	I will be etching around 300 glasses with one letter on each glass will I need one or two bottles of cream
Answer:	No
Question:	is assembly difficult
Answer:	Yes it includes the metal plate.
Question:	Hello, does this product includes the metal bed plate? thanks in advance
Answer:	This is a small machine for printing small plates. Some of the reviews show that users are not familiar with pressing machines. Printing needs experience. Since this is a small machine, one should not expect too much.
Question:	I've been trying to find a used one like this, but after reading reviews I'm not so sure... is this not capable of printing even small plates
Answer:	According to the description, Max separation of rollers is 1"
Question:	Hi, what is the max clearance when the top roller is highest? Thank you
Answer:	Here is the machine: https://www.amazon.com/dp/B07CCYLV8L?ref=myi_title_dp

Over 'n' Over Reusable Self-Stick Etching Stencil for Glass (or Stamping) - Bundle of Two Sets - Butterflies & Garden Friends

Over n Over

Based on 53 reviews Check latest price

Product description

Flexible, multi-use stencils easily adhere to various shaped objects, allowing you to etch, sand etch, or paint on glass, mirror, ceramics and other non-porous surfaces. (Can also be used for more traditional varieties of stamping)

Flexible, multi-use stencils easily adhere to various shaped objects
Use to etch, sand etch, or paint on glass, mirror, ceramics and other non-porous surfaces
Can also be used for more traditional varieties of stamping

User questions & answers

Question:	Are these reusable? What are the sizes
Answer:	We used contact paper. Which is basically vinyl with a sticky side to it, so yes, you should be able to use vinyl. If you want clean edges, the sides of your template will need to be pretty tight to your glass, otherwise you will get some bleeding around the edges.

Ramelson Intaglio Etching Twisted Scriber, Scraper/Burnisher, Hook & Carbide Scriber, Knife Kit

Based on 14 reviews Check latest price

Product description

Hook Style Sharpened points with knurled center. Length 7-1/2" 52.925 Chisel Type Scriber made of steel with one sharp point for scribing and a sharpened chisel end. Length 6 1/2" 52.928 Carbide Tipped Scriber can be used on hard jewels, metals, etc. Hexagonal aluminum handle prevents rolling on bench. Length 5-1/4". 52.954 Twisted Scriber Overall length: 6-1/2 Double End. For easy, precise engraving, scribing or marking on glass, metal, plastic and ceramic. Scraper/Burnisher Made of steel with one sharp point for scraping and a curved, rounded end for burnishing. Length 6".

User questions & answers

Question:	Would the snowman or christmas tree stencil fit on a 3.25 inch ornament
Answer:	Yes! They are reusable ~ just rinse off, let dry and you’re ready to go again😊 Sizes are dependent on which ones you purchase. From small to medium to larger ones and longer ones.

Variable Electro-Chemical Etching Machine"The Personalizer Plus"

Based on 13 reviews Check latest price

Product description

The Personalizer Plus allows you greater power and control when applying a custom engraving or mark into the metal of your knife, gun, medical tool, or jewelry. Using an electrolyte solution and AC or DC current instead of a drill bit allows for great speed and uniform repetition without the manual dexterity. Etching machine comes with two bottles of electrolyte fluid (SCE-1 and SCE-10), one bottle of cleaner, one applicator tool, one pack of applicator pads, one roll of stencil papers, one test stencil, and instructions.

Add your custom logo to your knives, guns, tools, and jewelry by etching or oxidizing the metal!
18 volt transformer, Etch/Mark switches between 120V direct current and 60Hz alternating current, but the knob allows you to control the electric flow, and lights brighten/dim with the change in intensity, allowing for precision etching/marking. Safety fuse installed to prevent blowout from accidental circuit completion.
Comes with power box, one cathode applicator, one pack of 15 applicator pads, one bottle of SCE-1 eletrolyte fluid, one bottle of SCE-10 electrolyte fluid, one bottle of AMCE cleaner, one roll of stencil paper, one practice stencil, and instructions. Each item (except box and applicator) also sold separately.
Etches and/or marks just about any metal, in only a few seconds!

User questions & answers

Question:	what types of metals does this work on? I imagine steel but will it do others such as aluminum
Answer:	SCE-10 is universal, and good when you don't know what kind of steel you have, but also works well on high carbon steels like 1095 and 1080. SCE-1 is preferred for aluminum, stainless, stellite, highly alloyed metals, tool steel like D2, and monel metals.
Question:	Sce-1 or sce-10, what is the difference
Answer:	I assume you mean the etching electrode - 1/2 x 1 1/2
Question:	What is the dementions
Answer:	The Personalizer has a 12V transformer, while the Plus has an 18V. The Personalizer has a switch to alternate between full direct and full alternating current, while the Plus also has a knob to lower the current (and dimming lights to indicate flow rate), allowing for precision control on depth/darkening of your etch/mark. These are the only differences; everything else about them is the same, including the accessories included in the box.
Question:	What is the difference between the standard and pluse model from a user's standpoint
Answer:	If the ornament is round, it might be hard to get the snowman to stick to it without puckering.