12 best pac signal amplifiers
PAC VA-26 Video Amplifier
PAC
Product description
This video amplifier comes complete with 2 selectable inputs that amplify the signal to drive 6 individual monitors to show the same video source.
- Comes complete with 2 selectable inputs
- Amplify the signal to drive 6 individual monitors to show the same video source
- Video 2 is activated by a positive or negative latch
- Does not show input 1 and input 2 simultaneously
NETGEAR Wi-Fi Range Extender EX3700 - Coverage Up to 1000 Sq Ft and 15 Devices with AC750 Dual Band Wireless Signal Booster & Repeater (Up to 750Mbps Speed), and Compact Wall Plug Design
NETGEAR
Product description
NETGEAR AC750 WiFi Range Extender (EX3700-100NAS). System Requirements:2.4 and/or 5GHz, 802.11 a/b/g/n/ac wireless router or gateway, Microsoft. Internet Explorer. 8.0, Firefox. 20, Safari. 5.1, Google Chrome 25.0 browsers or higher. Troubleshooting tip- If you cannot get a WiFi connection working, you can use an Ethernet cable to connect your computer to the extender. Data throughput, signal range, and wireless coverage per sq. ft. may vary due to differences in operating environments of wireless networks, including without limitation building materials and wireless interference. Operating temperature: 32°to 104°F.
- Extended wireless coverage: Adds WiFi range coverage up to 1000 square feet, and connects up to 15 devices such as laptops, smartphones, speakers, IP cameras, tablets, IoT devices, and more
- AC750 WIFI speed: Provides up to 750Mbps performance using dual band and patented FastLane technology
- Universal compatibility: works with any wireless router, gateway, or cable modem with wifi. The product may not be compatible with routers or gateways with firmware that has been altered, is based on open source programs, or is non standard or outdated
- Wired Ethernet port: Simply plug in game consoles, streaming players, or other nearby wired devices using the one 10/100M port for maximum speed
- Safe & secure: Supports WEP and WPA/WPA2 wireless security protocols
- Simple to setup: Press the WPS button to connect to your router. Use the NETGEAR WiFi Analyzer app for optimal location
User questions & answers
| Question: | My family has two appartments next to each other, both separate electrical installations. Would this work if we wanted to split the internet bill |
| Answer: | Yes the EX8000 used as a wifi extender you have the option of having a guest network. You can use same SSID name as your main router or use a different SSID altogether. I did have issues with more than one extender on the same network using same SSID name as main router so I had to change one of the extenders to a different SSID. |
| Question: | Has anyone connected a ps4 of xbox one to the wifi from the range extender? if so, signal and game play any good |
| Answer: | If you mean an AT&T router signal, yes. If you mean cell tower signal, then no. |
| Question: | Does it create a new sid or does it exteneded your current sid, so one does not have to switch to differing networks when in range |
| Answer: | the input voltage is from 100 to 240 volts |
| Question: | I don't understand how some people give this 4-5 stars and others can't get it to work and give it 1 star |
| Answer: | there are 4 ports. I use multiple ones as this is the only system I can find that does not change the network name but once a year I also have one break and have to replace it or hard reset it myself. |
Product features
Discrete Wall Plug Design
Plug into a wall outlet for a sleek solution that extends your router's range and stays out of sight.
Smart Connect up to 15 Devices
Intelligently selects between dual bands to minimize interference and maximize speed for your smart wireless devices.
5-Minute Setup
Connect to your existing router with one button press, connect devices to your network, and you’re done.
Connect a Wired Device, Too
One 10/100M Ethernet port lets you easily connect a nearby wired device for faster transfer and uninterrupted connection.
Universally Compatible
Works with any WiFi router for hassle-free reliability.
PAC AA-GM44 Amplifier Integration Interface for Select 2010 and Up GM Vehicles,Black
PAC
Product description
The AA-GM44 T-harness plugs into the vehicle’s wiring behind the factory radio. It provides a 4-channel adjustable audio output via two sets of stereo RCA connectors. This allows simple and quick audio connection to an aftermarket amplifier, without effecting the performance of the stock speakers. Expand the factory sound sytem without replacing the factory radio, by adding an amplifier. Simplify the installation by using the AA-GM44 to provide the audio signal without havign to cut the factory wiring.
- Upgrades factory GM sound system without replacing factory radio by adding an amp
- Provides audio signal without having to cut factory wiring
- Provides 4-channel audio output with included RCA or speaker wire harness
- Not compatible in vehicles with premium factory amplified systems
- Includes each of 44-PIN General Motors connection T- harness, SOEM-4 line output converter, RCA level harness and speaker level harness
- Add-an-amplifier interface for select 2010 GM Vehicles with 44-PIN harness like Chevrolet Camaro
- Compatibility: 2010 - 2011 Chevrolet Camaro, 2010 - 2011 Buick LaCrosse, 2011 Buick Regal, 2010 - 2011 Cadillac SRX, 2010 - 2011 Chevrolet Equinox and 2010 - 2011 GMC Terrain
- Not compatible with vehicles equipped with factory amplifier
User questions & answers
| Question: | Will this fit in a 2014 Chevy Sonic |
| Answer: | Maybe it's OK,as long as it has an input for an outboard antenna. See the photos for a picture. |
| Question: | Will this work on a 2016 chevy cruze my link |
| Answer: | It will probably work anywhere there is an HD TV signal. |
| Question: | Will this work with a 2011 Chevy Cruz |
| Answer: | No,It cannot receive radio signals. |
| Question: | will this work in a 2014 chevy cruze with mylink |
| Answer: | The antenna is connected to the TV tower signal and cannot connect to the network signal. You don't need to have wifi to use it |
PAC LC-1 Remote Amplifier Level Controller,Black,Small
PAC
Product description
The PAC-LC-1 remote amplifier level control, used to adjust an amplifier's power level, stereo, equalizer or crossover volume form the dashboard or other remote locations. It adds sub-woofer level controls or balances a multiple amplifier installation. Fine tunes the volume of any RCA line level signal you wish to control. Compact housing allows the unit to be mounted virtually anywhere so control is at the user’s fingertips. Simple in and out connections, no additional wiring needed. Great for a sub amp volume control.
- Remote amplifier level controller
- Enables volume balance in any part of an amplified system
- Adds subwoofer level controls to any head unit
- Stereo RCA input and output
User questions & answers
| Question: | Does the label on the front of the unit (pac, level, etc.) come off easily, or is it painted on? looking to intstall this in a "clean" project |
| Answer: | Yes |
| Question: | The description says that it is a remote level controller. Does it work with an infrared remote control? If not, do you know of one that does |
| Answer: | Did this work on ur 2016 cruze. I have same year (new body). Crutchfield (big home and car audio dealer), does not have this available for this year as of yet (6-2-17). Want to change stereo but i trust crutchfield to have these things first. Still curious if u tried it or not. |
| Question: | are rca jacks both a line in and line out |
| Answer: | I am not 100% sure, but it does work on my 2011 lacrosse, same connectors. |
| Question: | Does the knob come off so that the unit can be flush mounted behind a panel |
| Answer: | Not sure about the mylink system. My son purchased this and had the local shop install it in his 2012 Sonic LT with the 6-speaker system. His biggest concern was retaining the steering wheel controls and Bluetooth microphone which seem to be the most common trade-offs. Worked perfectly to add an amp/sub without loosing any factory operations. I would suggest getting with your local install shop and talking with the experts but I will say this. I drive a Mazdaspeed3 with the factory touch/NAV and bose 9-speaker system. PAC said the similar adapter would not work on my car but I installed it 10 days ago and it works perfectly. I believe it is because it plugs in line between the head unit and the factory amplifier/Bluetooth/Sirius/etc... controllers. For the cost/benefit I would go for it. |
PAC AOEM-FRD24 Add-On Amplifier Interface with 24-Pin Connector for 2005-Up Ford Vehicles
PAC
Product description
This adapter is a plug and play add-an-amplifier kit for factory Ford/Lincoln/Mercury stereo systems. Easy and simple installation without having to cut up or splice the factory stereo wiring. Use this adapter to add an aftermarket amplifier to your existing stereo system. 4 channel adapter that is linear from 20 to 20k hz. Adjustable, independant gain controls for each channel. An amplifier turn on wire is provided.
- Interface that Allows the Replacement or Addition of an Amplifier in Select Ford Vehicles without Factory Amplified THX Sound System
- Interface is transformer isolated
- Provides 2:1 gain and infinite attenuation
- Linear from 20-20,000 Hz.Not compatible in vehicles equipped with the THX or Sony amplified systems
- Input connectors plug into factory stereo and vehicle harness
- Interface that allows the replacement or addition of an amplifier in select ford vehicles without factory amplified thx sound system
- Interface is transformer isolated
User questions & answers
| Question: | What the difference between pac ap4-fd11 amppro and this one |
| Answer: | Its painted on but its raised lettering and seems like it wouldn't be hard to remove. My remote is hid, so it's a nonissue for me, but I understand wanting it clean!! |
| Question: | Will this work for a 2017 Ford Fusion Hybrid |
| Answer: | IR controlled volume boxes are available, look up the MCM CUSTOM AUDIO 50-8394. |
| Question: | my truck have original subwoffer,but i wanna change. My question is this kit should be install in the back or i need to put in the radio |
| Answer: | Yes, there are two sets of RCA jacks. One set for "In", and one set for "Out". They are all female. |
| Question: | focus st |
| Answer: | Yup, in fact, that's what I did. I busted open the plastic housing and pulled out the circuitry, then drilled out a hole in the glovebox and mounted the knob. That way, I opened the glovebox and adjusted the levels if needed. |
PAC SNI-35 Variable LOC Line Out Converter
PAC
Product description
The SNI-35 Adjustable 2-Channel Line-Out Converter from PAC Audio is a line-out converter for factory radios with 2 to 50 watts per channel, accepts speaker level input and provides stereo RCA output signal for adding an aftermarket amplified audio system. It allows 50 watts maximum input per channel and has a linear 20Hz to 20,000Hz output based on input signal. The transformer isolated for optimal sound and performance. The unit maintains correct phasing and works with most factory-installed radios.
- Adjustable Line Output Converter
- Use the SNI-35 when adding an amplifier to a factory radio to convert the radio's speaker level output to the lower amplifier (RCA) level input
- Utilize Audio Transformer for Noise Isolation
- Phase Adjusted
- .5 dB Linearity from 20 - 20,000 Hz
User questions & answers
| Question: | is this the converter i get for the high output option on my amp |
| Answer: | This one is older |
| Question: | Want to connect to home audio, my level out can be up to 145w. Will it blow this? If I max volume |
| Answer: | no |
| Question: | So this doesn't affect the high-power feed going to the speakers it's leeching off of? They'll still be powered up |
| Answer: | Personal preference, if you don't plan on adjusting the pots on the unit then install with the radio. But if you want access to it, then obviously near your amp. |
| Question: | Does this have Power and Ground Wires |
| Answer: | No |
Product features
PAC SNI-35 Variable LOC Line Out Converter
The PAC Line Out Converter provides an additional set of pre-amp outputs from a head unit equipped with only 1 set. This Adjustable Line Out Converter is linear from 20Hz to 10KHz at +/-0.5 dB while maintaining signal phase. With the PAC SNI-35 2-Channel Line Out Converter, the input and output circuits are isolated to prevent ground loop noise. A PAC Line Out Converter can adjust the signal from 2W to 40W per channel with signals below 20Hz cut-off.
Qenker 2-Player LED Arcade DIY Kit for USB MAME PC Game DIY & Raspberry Pi Retro Controller DIY Including 2X Arcade Joystick, 20x LED Arcade Buttons, 2X Zero Delay USB Encoder (Blue & Red)
Product description
Qenker 2-Player LED Arcade DIY Kit for USB MAME PC Game DIY & Raspberry Pi Retro Controller DIY
Attention Buyers:
We update the diy kit into new version that will help you much easier to finish your diy projects.
All the LED Buttons will be bigger size (Drill Holes from 28mm to 30mm for the LED buttons)
1: Make sure the joystick have connected to the right 5Pin slot that the one opposite the USB-B slot.
2: About the Ball Top Handle.Please use a slotted screwdriver fixed the bottom of the Joystick Shaft to screw the ball top handle down and make sure it will not easy to loose.
We are trying to provide a high quality arcade diy parts. Trust us. The joystick not the best one but it's a good quality joystick if you installed it well.
The Joystick Gaming Experience will changed if you change another type restrictor. We can provide gt-8f (B07GDGLVKX) & gt-c round restrictor(B07GDH78K9).
Compatible model
Win8/Win7/Vista/XP/2000/98, Linux, MAC OS, Android. Raspberry Pi 1/2/3/3B Retropie Arcade DIY Projects,MAME DIY projects,USB MAME cabinet arcade DIY projects & PC controller computer game etc.
Package Included：
2x Zero Delay LED USB Encoder
2x USB Cable
2x 5Pin wires for Joystick
20x 3Pin wires for LED Push Buttons
10x Red 28mm LED Push Buttons
10x Blue 28mm LED Push Buttons
1x Red 5Pin 8 way joystick
1x Blue 5Pin 8 way joystick
1x Install Description
- Beautiful LED Arace Game DIY Parts for MAME JAMMA Project!
- 100% Zero Delay USB Encoders and Perfect work for all windows systems!
- Perfect Parts for 2 Player Arcade MAME DIY Project!
- Made with highest quality materials!Heat resistant plastic!
- Perfect LED Kit for Arcade PC Game DIY Project! Easy Install!
User questions & answers
| Question: | Will this work on an old school arcade machine |
| Answer: | No, the SIN-35 is used to convert the speaker outputs from a factory head unit or other higher powered head unit down to the lower RCA type output. You connect the convertor's speaker inputs to the head unit and then use an RCA cable to connect the RCA outputs to the RCA inputs of an amplifier or preamp/equalizer. |
| Question: | Will this kit work with pandora box |
| Answer: | Do NOT use it for home audio. Car audio is by default 4 ohms resistance. Home audio standards can very but are generally NOT 4 ohms resistance. It really depends so don’t take a chance unless you understand resistances. Why would you need it anyway for home audio? Makes no sense. It’s only meant to be used for car audio without RCA outputs for those wanting to add an amplifier. |
| Question: | Will they install into and work with a raspberry pi 3 b+/ modded arcade 1up street fighter ii cabinet? thanks |
| Answer: | The other speakers remain powered on and unaffected as far as I can tell in my application. My understanding is that it simply converts the high speaker-level out to a low-level for the RCA line out. |
| Question: | Can you use these joysticks for Xbox One |
| Answer: | This unit has positive and negative wires for speaker level. The additional wire (brown wire) is only to be tied into the ground wire in the event of a hum or hiss. So its really a built in ground loop isolator.The unit is passive and requires no additional power from an external power source.hope this helps. |
PAC LP7-2 L.O.C. PRO Series 2-Channel Line Output Converter with Remote Turn On
PAC
Product description
Engineered to optimize audio levels between radio and amplifier to achieve the best audio performance and avoid noise. PAC's L.O.C. PRO, redefines the line output converter. All feature full 20-20k +/-1.5db frequency response. Unique Stereo Gain controls and universal harness.
- PRO Series 2-Channel High Power Line Output Converter
- Designed to optimize audio levels between radio and amplifier to achieve the best audio quality
- Ideal for use when adding an amplifier to an OEM system
- Configurable for speaker level or RCA level input/output
- Single dial, precision matched stereo, level gain adjustment
User questions & answers
| Question: | Does this come with the wires for the line out converter, or is it just the box itself |
| Answer: | yes |
| Question: | which audio input wires are pos and neg? solid white and solid grey positive? stripe white and stripe grey neg |
| Answer: | Yes it will |
| Question: | Can this get connected to the stock sub if the sub is removed or would it have to go on left and right rears |
| Answer: | Yes they do, you need usb encoders for each player, To connect to the raspberry pi3. https://youtu.be/09DQCOr6zQM |
| Question: | Would i need one of these for an aftermarket head unit that has preamp outputs, or is it pretty much just an adapter |
| Answer: | What? Is this a serious question? |
PAC AOEM-MAZ2 Interface That Allows Replacement or Addition of an Amplifier in Select Mazda Vehicles Without a Factory Bose Sound System
PAC
Product description
Interface that allows the replacement or addition of an amplifier in select Mazda vehicles Without premium Bose sound system. Four female RCA Output jacks connect to amplifier. Not designed for use with Bose systems.
- Interface is Transformer isolated
- Maintains phase
- Linear from 20-20, 000 Hz
- Provides 2: 1 gain and infinite attenuation
- Input connectors plug into factory stereo and vehicle harness
- Interface that allows the replacement or addition of an amplifier in select Mazda vehicles without premium Bose sound system
- Interface is transformer isolated
User questions & answers
| Question: | Will this fit a 2010 mazda 3 grand touring sedan with bose 10-speaker |
| Answer: | The harness, box, and instructions are included. |
| Question: | I ordered this item and i was instead sent a used pac aoem-frd24 instead. if i order this again can you guarantee i'll get what i pay for this time |
| Answer: | Almost always the stripe wires will be negatives and the solid wires will be positive. |
| Question: | Will this fit in on a 2015 Mazda 6 Touring (Non-Bose |
| Answer: | Most likely it depends on what you are trying to do. If you care about having a left and right channel(for a LR 6x9 setup or something along those lines), I would tap into the LR rears. If you are just installing another sub, connecting this to the stock sub shouldn't be a problem |
| Question: | Is this unit only for adding a subwoofer amp, or can it also be used for adding a 4 channel amp for the door speakers (like the stock bose system |
| Answer: | this is an adapter to convert speaker output to rca. usually aftermarket head unit will have the rca output that you can plug straight to amplifier |
Pac Va26 2 In/6 Out Video Signal Distribution Amplifier Amp
Product description
Description:
VA26:
- Video signal amplifier and switching unit
- 6 Video outputs, each showing the same video source
- Select from Video 1 and Video 2 Output
- 2 Selectable video inputs
- Positive and negative triggers for selecting inputs
- Pac Va26 2 In/6 Out Video Signal Distribution Amplifier Amp
PAC AP4-CH41 (AP4CH41) Amppro power adapter Compatible with 2013-2017 Chrysler Dodge Jeep Vehicles
PAC
Product description
PAC AP4-CH41 AmpPRO Interface (For Chrysler(R), Dodge(R), Jeep(R) & RAM(R) 2013-2017). Good quality product and designed for easy use.
- Made of high quality material
- Good quality product
- Designed for easy use
User questions & answers
| Question: | need r.2 version of this. will this work on a 2020 jeep wrangler unlimited sport |
| Answer: | It should yes |
| Question: | Will this work for 2017 Dodge Ram 1500 with Alpine system |
| Answer: | Yes if you order from us I can guarantee it will be correct.Thanks |
| Question: | Does this work on a 2019 Dodge Charger scat pack |
| Answer: | Also this works without issues on the 2016 Mazda 6 NON-BOSE (Sport, Touring) including the REM (Remote Turn On Signal) which is contrary to some responses here actually wired on 2016 Non-Bose cars as well. |
| Question: | Can I run a line with remote wire and connect straight to the amplifier |
| Answer: | You can addering 2 amp wherever you wan to use. |
PAC TR-4 Remote Turn-on Module
PAC
Product description
Module senses voltages as low as 0.8v and provides a 12v output with a 1-second delay. Can be triggered off of speaker leads or +5 remote wires.
- Remote Turn-On Module
- Used to turn on remote amplifiers
- 2 Second delay to prevent turn-on noise
- Supplies 2 amps of current
- Can drive multiple amps or a power antenna
User questions & answers
| Question: | Will this work to pass 6v dc to a servo motor |
| Answer: | this is the r2, there are no more of the old modal. |
| Question: | How long does it output the trigger voltage after audio input source is off |
| Answer: | Yes |
| Question: | How is it installed specifically, I have a 2004 acura rl with a stock radio and i am confused on where I should hook these certains wires to |
| Answer: | Check their website!! It worked in a 2016 Scat! |
| Question: | what gauge are the wires |
| Answer: | Yes you can use a remote wire to turn amp on from pac |
Latest Reviews
View all
Colon Cleanse And Detoxes
- Updated: 19.01.2021
- Read reviews
Wood Floor Cleaner For Bucket
- Updated: 24.05.2021
- Read reviews
Epson Android Projectors
- Updated: 08.01.2021
- Read reviews
Thinning Hair Concealer
- Updated: 16.06.2021
- Read reviews
Next Personal Humidifiers
- Updated: 22.01.2021
- Read reviews