• 8" SPEAKER DRIVER - Delivers powerful sound with highly accurate, distortion-free bass to provide you with a better listening experience.
• LOW PASS FILTER WITH FREQUENCY RESPONSE DOWN TO 38Hz - Ensures that your woofer only plays sounds too low for your speakers to properly output. Supplement your speakers great high and mid-range with bass you can really feel.
• THICK MDF WOODEN ENCLOSURE - We use high quality, dense fiberboard materials that offer reduced acoustic resonance for better audio quality.
• AUTOMATIC STANDBY - Save on electricity with an auto standby feature that ensures the woofer is not unnecessarily using up power when it's not being used.
• 2 YEAR WARRANTY - Edifier guarantees you'll have an amazing experience with our products. Buy with confidence, and enjoy our 2 year warranty.

User questions & answers

Question:	Can anyone provide me with the physical dimensions of this sub? It’s not even listed on their website
Answer:	How did you blow it Did you connect it to receiver subwoofer output. Take out the old speaker check Watts and get something higher.
Question:	Are these compatible with Edifier R1280Ts speakers
Answer:	Subwoofer don’t produce voices only bass
Question:	I have edifier home speakers and purchased this sub. Do I need an amp/receiver for it to work? Or can i hook it up to the speakers
Answer:	For sure! no issue at all.
Question:	Does it work with r1280t? Helppp
Answer:	IT does have a cord.

Product description

Earthquake's Supernova MKIV Series of powered subwoofers delivers an amazing combination of high performance and efficiency. Its brilliant design overcomes the limitations known from conventional closed and ported designs that prevent radical excursion, deep response and high dB. The active driver used in the MKIV is designed for accurate reproduction of bass and sub-bass frequencies. Its thermally pressed poly-ether foam surround allows high excursion without deformation. The Symmetrically Loaded Audio Passive System (SLAPS) lets one amplifier produce the output of two woofers, reducing your power consumption and electricity bill. The 450-watt amplifier has a multitude of user friendly features that put you in control. The MKIV has advanced technology that reproduces low recordings at high dB, putting you directly in the center of the movie set.

• Dual firing powered subwoofer
• SLAPS technology increases dB level and saves energy
• 450 watts class "A/B" power amplifier
• 12 dB/octave variable filter from 40 Hz to 180 Hz
• High level inputs and low level outputs with automatic signal detection

User questions & answers

Question:	is this dual driver sub
Answer:	These are garbage, don't waste your money. Not worth more than 5$
Question:	What would you recommend this subwoofer or a klipsh i already have a klipsh towers and large center, but have an onkyo woofer
Answer:	None, it will slip in certain style of shoe.
Question:	Does this sub come with a grill to cover the front
Answer:	Six pairs.
Question:	Is the rms 450 watts or the peak output?I want to know the rms of the sub
Answer:	Six pairs.
Question:	I'm connecting two18" Seismic powered subwoofers, but notice that one is playing at a much lower volume. Is there a way to rectify this
Answer:	Hello, she is poseable and can sit with her knees bent. Thanks so much for your inquiry.
Question:	Is this speaker self powered or do you need a amp
Answer:	Unfortunately it does not.
Question:	Can I run two 15s at 150 watts rms from the internal amp
Answer:	They stand about 12 inches tall
Question:	watts for sat speakers. . . Is that 150 peak or rms at 8 ohms or 4 ohms ? can it got down to 4hms? is this sat out mono or stereo
Answer:	A lot of YouTubers use monster high dolls as ooak dolls because of their joints. Personally I have not done it but I've seen a lot of beautiful dolls repainted from these

Product features

Seismic Audio 18" Powered Subwoofer Cabinet

Our powered 18-inch pro audio subwoofer cabinet delivers the low-end sounds loud and clear with a 18-inch woofer and 500 watts RMS. It doesn't matter if you are doing a DJ gig, a wedding, a church event, or a club gig, these subwoofers will deliver the deep bottom end you want! Great quality powered subs are very hard to find, especially affordably. The Seismic Audio brand was designed to make the professional musician, as well as the musician low on cash sound great. With your purchase, you will receive a powered 18" subwoofer cabinet pictured and described above. So, put it in your cart today and get ready for years of trouble-free, crystal clear sound!

Tremor 18

This listing is for an 18" pro audio powered subwoofer cabinet. You will receive one powered 18" pro audio subwoofer pictured and described above. This high-performance, active subwoofer speaker system was designed with larger PA or DJ settings in mind. The Tremor-18 powered subwoofer cabinet provides the power and performance you need. This powered subwoofer yields powerful deep bass reproduction and tight low end. The Seismic Audio brand was designed with the notion that every musician should have access to high-quality pro audio gear affordably.

Back Panel

The Tremor-18 rear panel is outfitted with two input/output XLR and 1/4" (monobalanced TRS) combo jacks as well as two power speakon and banana-clip outputs. This sub also has a low-pass filter and separate sub and satellite volume and balance controls, two-channel satellite power output (150 watts peak x2), a clip light and a power light.

Protective Hardware

Heavy-duty, rugged hardware protect our Tremor-18 sub cabs with a fully metal grill on front, heavy-duty metal corners, and thick, durable rubber feet. Also, the Tremor-18 comes with a pole mount in order to mount main speaker cabs elevated above.

Heavy-Duty Recessed Handles

In order to transport your subwoofers easily, our durable recessed handles on either side do the job. The fact that they're recessed ensure a tight profile and alignment with the sides of each cabinet.

Earthquake Sound Supernova MKIV-12 Powered Subwoofer

The Supernova MKIV Series of powered subwoofers delivers an amazing combination of high performance and efficiency. Its brilliant design overcomes the limitations known from conventional closed and ported designs that prevent radical excursion, deep response and high dB.

The MKIV has advanced technology that reproduces low recording at high dB, putting you directly in the center of the movie set.

Accurate Reproduction

The active driver used in the MKIV is designed for accurate reproduction of bass and sub-bass frequencies.

High Excursion

Its thermally pressed poly-ether foam surround allows high excursion without deformation.

Power Reduction

The Symmetrically Loaded Audio Passive System (SLAPS) lets one amplifier produce the output of the woofers.

• BUILT-IN AMPLIFIER: A built-in 1200 Max watt amplifier powers the subwoofer
• PULSE WIDTH MODULATED: This design controls the output voltage and current precisely by not only removing the output current sensing loss, but also eliminating all secondary feedback circuitry. It increases efficiency, is lighter, smaller reliable
• VARIABLE LOW-PASS FILTER: A low-pass filter is an electronic circuit that removes all the notes below the filter's frequency setting. You will use the Low-pass filter to primarily keep high notes out of your subwoofer(s)
• HIGH LEVEL INPUTS: Speaker level inputs are commonly referred to as high-level inputs. It will be used to connect the BAB10 to your factory radio or an aftermarket radio that does not have low-level (RCA) inputs
• LOW LEVEL INPUTS: Line level inputs, also known as RCA inputs or low-level inputs, use RCA interconnect cables to link the BAB10 with the source unit. Most aftermarket radios have multiple pairs of RCA outputs that can connect to multiple amplifiers
• VARIABLE BASS BOOST: Variable Bass Boost allows you to adjust the low bass within the boost range to just the way you like it
• DIMENSIONS: 14 inches in Depth, 12. 3 inches in Width and 3. 3 inches in Height. If you are short on space, this is a great solution for you. The combination of amplifier and subwoofer all into one, makes this ideal for spatially challenged vehicles
• : BOSS Audio Systems provides a Powerful 3 Year Platinum Online Dealer so long as the purchase is made through . We strongly encourage professional installation of this product to ensure proper and safe functionality

User questions & answers

Question:	I have a boss 1100 riot mono amp, will the bass gain control knob work with this
Answer:	Yes, it will. But there is one included as well.
Question:	Is this good for the 2019 rav
Answer:	Yes it will fit in your rave 4 as amplifiers are universal.
Question:	I have a bronco with a kenwood stereo and kenwood speakers(4) will this enhance my sound and i am not looking for overpowering bass, is this the right
Answer:	They are not overpowering but they do add bass you can feel with proper placement. under drivers seat and one under pass seat. I would try 2 of the BAB10`s they just sound better and will still barely fit ....check the size specs first. either way you cant go wrong they both sound great! Thanks, Adam
Question:	Can you link two together with one remote
Answer:	WHEN YOU SAY REMOTE DO YOU MEAN 1 REMOTE VOLUME CONTROLLER . I HAVE 2 BAB10'S I WONDERED THAT MYSELF. NOT WANTING TO HURT EITHER UNIT I JUST PUT THE VOLUME CONTROLS SIDE BY SIDE. I'D LIKE TO KNOW WHAT BOSS SAYS.

Product features

Amplified Space Saver

A built-in amplifier powers the 10-inch subwoofer. No need to have a subwoofer housed in a box AND a separate amplifier. If you have a small cabin to work with, the BAB10 will provide the rich bass that every sound system cannot do without.

Remote Subwoofer Control

A wired remote subwoofer control at your fingertips gives you control, so when the need hits… so does your BASS

Product description

A step-up from our Reference Series subwoofers, The SPL Series have best-in-class MAX output levels making them high-performance subwoofers at affordable prices.

• Bass reflex via exclusive front firing internal flare port for placement flexibility
• High efficiency class d amplifier with 400W RMS and 800W peak
• Compatible with Klipsch wa 2 wireless kit
• Premium scratch resistant finish in Ebony
• Shock absorbing rubber feet, steel grille posts and a woven cloth grille for a premium look and feel

User questions & answers

Question:	Does it have international warranty
Answer:	Our subwoofers carry a warranty shown at klipsch.com/warranty-subwoofers. The warranty service if needed would be provided in the country where the item is purchased.
Question:	how does it compare to the R-115sw? What are the differences
Answer:	These two models are the same in spec and technology. R-115SW being the older model and SPL-150 being the newer model in the same position in our subwoofer line up. The main differences are the finish and that the SPL-150 has feet instead of the plinth used on the older model R-115SW.
Question:	china? or Hope Arkansas
Answer:	Klipsch designs and engineers all of our products in the United States. For more than 70 years, we have continued to proudly build many of our speakers lines at our factory in Hope, Arkansas This particular product was assembled in China. We assure you – it rocks!
Question:	I have a klipsch r-110sw subwoofer - can i add this sub next to it, or should i simply replace it with this sub
Answer:	If your amp has 2 subwoofer outputs......you certainly could have one on the left and one on the right......but the spl15 is a powerhouse......I have a dennon receiver And my basement is 2700 sq ft with a solid 1500sq ft of open space and the spl15 literally rocks the whole basement and shakes everything in my 2800 sq ft upstairs...... including the window blinds. This is at about half volume!!! I would go with one spl15 or 2 spl10 subs.

Product features

Klipsch SPL Subs

The built-in, high-efficiency amplifier features an analog preamp design, which maintains the original signal path for cleaner, true-to-source reproduction. The Class D output stage ensures maximum efficiency for maximum output, detail, and low-frequency power.

WOOFER ANATOMY

Klipsch Cerametallic cones are matted to a dual-layer, copper-wound voice coil for exceptional conductivity. Reference Premiere woofers are housed in a non-resonating, stamped-steel basket that’s secured to a large magnet motor for exceptional efficiency and low distortion, and matched to our horn-loaded tweeters for optimal acoustic execution.

YOU CONTROL IT ALL

Low Pass Crossover and Variable Phase control allows you to tune the subwoofer to your Klipsch speakers and to your room, establishing the ideal level of bass. Line Level / LFE RCA inputs ensure compatibility with home theater receivers.

Both the RCA and wireless inputs can be utilized, giving you the ability to use a single subwoofer with multiple systems in the same room. For example, you can use the wireless input for your home theater set up and the RCA input for your 2-channel system, without needing to switch inputs when changing between systems.

Product description

Power: 250W rms@4ohm@100hz, 600W max

bass boost: 0-12db

lpf filter: 30-150hz

phase switch: 0 or 180 degrees

pwm MOSFET power supply/ thermal protection circuit

adjustable input sensitivity

remote subwoofer control included

rca and high-level inputs

passive radiator design

slim 12 4 Ohm subwoofer

dimensions: 13.6 x 11.1 x 3.15(L x w x h)

remote bass knob included

• VPAS12 - Cerwin Vega 12" 250W RMS low profile amplified subwoofer
• Rms power: 250W | max power: 600W
• Bass Boost: 0-12dB
• Lpf filter: 30-150hz
• Dimensions: (L x W x H) 13.6" X 11.1" X 3.15"

Product description

Introducing the Rockville RTB12A Powered Subwoofer Tube. We at Rockville just had to manufacture a high quality powered tube. Growing up one of my best friends bought a car and it had a powered tube in it. The sound that it produced was just amazing and I will never forget it. Tubes push out some of the punchiest bass available. I personally love punchy bass that is deep and clean. Bass is an integral part of any good audio system, and the Rockville Bass Blaster amplified subwoofer tubes will add power and impact to your car audio system. The cylindrical shape of the enclosure helps focus the motion of the bass pressure so it maximizes that punchy output from both the woofers face and the tuned rear aero port. Strong deep bass will fire through your vehicle for astounding results.



Since this is a powered tube, you get everything you need! This is your entire bass system. The built in power amplifier will push this tube to the max. The amp, sub and enclosure are perfectly tuned and matched to sound perfect together.



As far as power is concerned the RTB12A is a powerhouse. The compact package features a high power 12” woofer and 600-Watt amplifier that will literally shoot deep bass waves throughout your car. You can fine-tune the subwoofer with the built-in electronic low pass crossover so that your subwoofer meshes perfectly with the rest of your audio system. The built-in bass equalizer allows you to set in the exact amount of bass boost of up to 18dB’s @ 45Hz for real ground pounding bass while the included dashboard bass control knob allows you dial in all the bass directly and conveniently from the drivers seat.



Installation is a breeze! No need for building and wiring enclosures to amplifiers. Simply power, ground remote and send signal to the tube and you are ready to enjoy the most incredible bass you have ever heard.

• Rockville RTB12A 12“ 600w Powered Subwoofer Bass Tube With Bass Remote. 600 Watts Peak/300 Watts RMS.
• 12“ High power woofer in vented tubular enclosure. Integrated, built-in 300 Watts RMS Rated amplifier.
• Rear aero vent bass system. Speaker level and RCA line-level input. Frequency response: 30Hz-200Hz. Sensitivity: 111 dB.
• Adjustable bass crossover. Dashboard adjustable bass remote control. Molded steel woofer grill.
• Four steel mounting brackets + two canvas straps with Velcro fasteners. Tube is covered in durable aviation grade tweed with embroidered logo. Dimensions: 12.75” x 22.83“.
• Rockville RTB12A 12“ 600w Powered Subwoofer Bass Tube With Bass Remote. 600 Watts Peak/300 Watts RMS.
• Rear aero vent bass system. Speaker level and RCA line-level input. Frequency response: 30Hz-200Hz. Sensitivity: 111 dB.

User questions & answers

Question:	Why can’t I return this item ,it was wrong one
Answer:	Ask the seller, there customer service isn't the best
Question:	Is it waterproof
Answer:	I really don't think so.
Question:	Anyone know the cubic/ft volume of the tube itself
Answer:	600 watts
Question:	Why does it say 500 watts on the subwoofer? But you say 600 watts
Answer:	It's neither. Your lucky if you get 200 watts out of it but depends on which input you use and the radios output. I opened mind to see what the audio chips looks like and they are only rated at 150 to 200 watts max.

Product features

Rockville RTB12A 12" 600w Powered Subwoofer Bass Tube + Bass Remote

Introducing the Rockville RTB12A Powered Subwoofer Tube. We at Rockville just had to manufacture a high quality powered bass tube. Growing up one of my best friends bought a car and it had a powered bass tube in it. The sound that it produced was just amazing and I will never forget it. Bass tubes push out some of the punchiest bass available. I personally love punchy bass that is deep and clean. Bass is an integral part of any good audio system, and the Rockville Bass Blaster amplified subwoofer tubes will add power and impact to your car audio system. The cylindrical shape of the enclosure helps focus the motion of the bass pressure so it maximizes that punchy output from both the woofers face and the tuned rear aero port. Strong deep bass will fire through your vehicle for astounding results.

Since this is a powered bass tube, you get everything you need! This is your entire bass system. The built in power amplifier will push this tube to the max. The amp, sub and enclosure are perfectly tuned and matched to sound perfect together.

As far as power is concerned the RTB12A is a powerhouse. The compact package features a high power 12” woofer and 600-Watt amplifier that will literally shoot deep bass waves throughout your car. You can fine-tune the subwoofer with the built-in electronic low pass crossover so that your subwoofer meshes perfectly with the rest of your audio system. The built-in bass equalizer allows you to set in the exact amount of bass boost of up to 18dB’s @ 45Hz for real ground pounding bass while the included dashboard bass control knob allows you dial in all the bass directly and conveniently from the drivers seat.

Installation is a breeze! No need for building and wiring enclosures to amplifiers. Simply power, ground remote and send signal to the bass tube and you are ready to enjoy the most incredible bass you have ever heard.

'Good things do come in small packages' Rockville Bass Tubes will fit every vehicle without taking up valuable space and provide super low-end bass response. No permanent installation is necessary, the tubes come complete with 4 mounting legs and Velcro mounting straps so your bass tube will stay put where you place it.

Rockville Bass Blaster Tubes are the ultimate in functionality, just take aim experiment with different placement positions, corner load, rear load or front load the bass tube and you will experience incredible bass response in any vehicle configuration.

Product description

Since day one, we have spearheaded the car audio revolution. Nothing has changed. Rockford Fosgate is still the global leader in audio innovation and your passion is our purpose. We engineer the best audio systems for your lifestyle!

• The Punch PS-8 is a self-contained amplified subwoofer system featuring a single Punch 8" shallow subwoofer in a custom sealed enclosure and a built-in 150 Watt Class D amplifier
• The system is all-inclusive, so you only need to run power, ground and a signal from the source to get this baby moving
• Featuring adjustable 12db/Octave low pass crossover, built-in adjustable bass boost EQ, hi-level/low-level inputs and built-in 0°/180° phase switch
• Includes Remote bass level control, all power, ground, turn-on wires and mounting hardware with dimensions of 14.4” x 9.4” x 3.3”
• Famous Rockford Fosgate build quality with a full 1-year warranty when purchased from an authorized Rockford Fosgate reseller

User questions & answers

Question:	I have a 2007 ford focus: the drivers seat's height is adjustable so it should fit there but will it fit under the passenger's seat
Answer:	Hi there, please contact Kingston Technical Support, 800-435-0640 or open a live chat (http://www.kingston.com/us/support), 6am - 6pm PST, Mon - Fri, if your DataTreaveler Vault Privacy USB flash drive has stopped working correctly. Have the product on hand and reference your Case # SR419611 when reaching out to us. We can validate product authenticity with Kingston part number and revision code etched on the drive exterior metal casing, and initiate warranty process as needed. Thank you.
Question:	How long is the warranty good for if i didn’t add the protection plan? the speaker blew at low volume . . . also who do i contact for the warranty
Answer:	Different level of encryption. This one is FIPS certified
Question:	What Ohm Ω is this setup running
Answer:	Yes. The width of the USB stick is no more than the width of the USB-C connectors on some cables.
Question:	Could someone give me good dimensions (lxwxh) as i want to put it into the back seat fold down arm rest hole
Answer:	Look at the 3rd photo on the item page...there are 2 connectors.

Product description

PylePro Model : PPHP1037UB

Pro Audio Active PA Speaker System

Bluetooth Loudspeaker PA Cabinet Speaker System, Powered 2-Way Full Range Sound, Recording Ability, USB/SD, AM/FM Radio, Aux Input, 10-Inch, 700 Watt

System Features:

Loudspeaker PA System

Rugged, Durable & Reliable Sound

Bluetooth Wireless Streaming Ability

Speaker System: 10'' Woofer, 1.0'' Tweeter

Compression Driver with Titanium Diaphragm

2-Way Full Range Audio Projection

Built-in Amplifier

Fully Featured 2-Channel Mixer

Aux-In (3.5mm) Input Connector Jack

RCA (L/R) Stereo Line Input Connectors

Ability to Connect External Devices

(Smartphones, MP3 Players, Tablets, etc.)

USB Flash & SD Memory Card Readers

USB Reader Doubles as Device Charging Port

AM/FM Radio

Digital LCD Display Screen

ID3 Tag Song Readout Info: LCD Displays Song Title/Song Time

Touch Button & Rotary Controls

Mic Level, Input Level & Volume Control

Master Volume, Treble, and Bass Adjustable

1/4'' Microphone Input

1/4'' Line Output Connector Jack

XLR Input Connector Jacks for Microphone/Guitar

Convenient Carry Handles

35mm Speaker Stand Mount

Engineered Heavy Duty ABS Housing

What's in the Box:

10'' Bluetooth PA Speaker

Remote Control

Power Cable

Bluetooth Wireless Streaming:

Instantly Stream Music from Your Bluetooth Devices

Works with All Your Favorite Bluetooth Devices

(iPhone, Android, Smartphone, iPad, Tablet, PC, etc.)

Bluetooth Version: 2.1+EDR

Bluetooth Wireless Range: 100'+ Feet

Bluetooth Network Name: 'Pyle Speaker'

MP3 Audio Recording Ability:

It's Easy: One Button Record Activation

Record Audio as Streamed through the Speaker System

Ability to Record Vocals via Microphone

Can Also Record Audio via Line & Aux Inputs

Records to USB Flash & SD Memory Card

Audio File Type Created: .WAV

Easy Transfer to PC & Mac

Subwoofer:

Size: 10'' -inch

Material: Stamped Steel Basket

Impendence: 8 Ohm

Magnet: 40 oz.

Voice Coil: 50mm, 2'' -inch

Sensitivity: 96dB

Frequency Response: 40Hz-22kHz

Tweeter:

Size: 1.0'' -inch

Material: Titanium

Impendence: 8 Ohm

Sensitivity: 110dB

Voice Coil: Kapton

Frequency Response: 600Hz-20kHz

Technical Specs:

Max Power Output: 700 Watt

RMS Power Output: 350 Watt

Amplifier Class: AB

Digital Audio File Compatibility: MP3, WMA

Maximum SD/USB Flash Memory Support: 32GB

T.H.D.:1%

S/N Ratio: 72dB

Crossover Frequency: 2.2kHz

110/220 Voltage Selectable

Dimensions (L x W x H): 14.1'' x 11.4'' x 21.2"

This PA speaker is a wide-coverage, two-way loudspeaker that covers the complete audio spectrum. Pair with your favorite amplifier for powerful full-range, distortion-free sound. This speaker pushes everything from pounding bass to a chirpy high-end, all in one cabinet. It comes equipped with ¼' outputs to accommodate voice or any electronic instrument. This speaker has a 35mm pole mount socket for a multitude of applications. Ideal for bands and DJs to rock the audience anywhere, at the club or a party. And you'll always be ready for the next gig - these speakers are compact enough to be truly portable. The state-of-the-art titanium diaphragm compression drivers and subwoofer are protected by a metal grill, so you know your sound is secure. Enjoy additional features like a fully featured 3-Channel Mixer, XLR and ¼'' Mic Inputs, 3.5mm Aux-in compatible with all digital music players and smartphones, play & record audio files via USB flash connection and much more.

From the Manufacturer

Pyle Powered Active Loudspeaker System

• HIGH-QUALITY SOUND REPRODUCTION: Pyle PPHP1037UB pa system is fully equipped with a heavy-duty self-powered 10-inch subwoofer Packing a powerful 700 watts this self-powered speaker monitor effectively reproduces the entire studio audio spectrum and will not get drowned out in even the largest venues
• COMPATIBLE WITH ANY MEDIA: Easily connect all types of portable pa loudspeaker Bluetooth DJ system party or band equipment to the RCA input line in Works with all of your favorite Bluetooth enabled devices Apple iPod, iPod Touch or iPhones Play MP3 files from the USB input
• CHAIN LINK MULTIPLE SPEAKERS: Connect number of digital active powered speakers using standard XLR cable from monitor’s line out port to the next loudspeaker’s line into play mono or stereo amp music XLR input makes it easy to connect a mixer or use the microphone in port to add any instrument directly
• GREAT FOR ANY VENUE: The handle makes transporting these professional stage speakers from home to the concert simple Built-in port allows you to set up the compact DJ sound system speaker on a standard mount The high, mid and bass frequency knob allows adjustment for locations like outdoor or in a church
• BUILT TO LAST: Protected by a circuit and engineered abs box construction this amplifier is built to last Complete satisfaction guaranteed Contact us If the item shows any defect we will repair or exchange it for a new one

User questions & answers

Question:	Could I sync it to my PS·3/ PS
Answer:	The Bluetooth is a little tricky to work... Sometimes it's say connected but does not get the sound from your phone or other device. It also have limited range.
Question:	How is the Bluetooth? How much is its range
Answer:	yes you can
Question:	can you plug a guitar into this speaker
Answer:	This requires an electrical outlet to operate. There is no battery.
Question:	how long does the battery last
Answer:	Hi, the speaker Dimensions (L x W x H): 8" x 10" x 29.5" -inches. You may check other details of the unit by visiting our website pyleaudio.com. Type the model number on the search box PS65ACT for more details. Thank you.

Product features

About Us

Pyle was founded in the 1960s as a manufacturer of high-quality advanced woofers. Our reputation quickly grew as customers around the United States used our products and recognized the power of our scientifically-tuned woofers and drivers. Soon, the Pyle Driver, our original speakers, became a household name.

In the late 20th century, Pyle established itself as a premium source for replacement speakers and car audio. By the year 2000, Pyle had undergone a massive transformation, expanding into the nascent market spaces of car audio, home audio, marine audio, and professional audio & musical instruments - our Pyle Pro line.

Product description

Pyle Model : PSUFM1280B

Bluetooth PA Speaker & Mic Bundle Kit

Portable PA Speaker System Bundle Kit with Built-in LED Lights, Rechargeable Battery, Bluetooth Wireless Streaming, Handheld Microphone, MP3/USB/Micro SD/FM Radio (12’’ -inch, 700 Watt)

System Features:

PA Loudspeaker System

High-Powered Active Speaker Tower

Hassle-Free, Quick Setup Audio & Vocal Projection

Multi-Colored LED Flashing DJ Party Lights

Bluetooth Wireless Music Streaming

Built-in Rechargeable Battery for Portability

Includes Wireless Handheld Microphone

Mic Priority Control: Automatic Vocal Talkover over Music

FM Radio with Digital LED Display

Connect & Stream Audio from External Devices

USB Flash & Micro SD Memory Card Readers

1/4'' Microphone / Guitar Input

Aux (3.5mm) Jack

Treble Bass Echo Volume Controls

Full Range Stereo Sound Reproduction

Impressive Bass Response

Convenient Carry Handle & Wheels

External Battery/Power Supply Support: DC 12V

Perfect for Karaoke, Crowd Control, Public Even Gatherings

Bluetooth Connectivity:

Instant Wireless Music Streaming Ability

Simple & Hassle-Free Pairing

Works with All of Today’s Latest Devices

Smartphones, Tablets, Laptops, Computers, etc.

Bluetooth Version: 2.1

Bluetooth Network Name: 'PyleUSA’

Wireless Range: Up to 30’+ ft.

Audio Recording Mode:

It's Easy: One Button Record Activation

Record Audio as Streamed through the Speaker System

Ability to Record Vocals via Microphone

Records to USB Flash & SD Memory Card

Audio File Type Created: .MP3

What's in the Box:

PA Speaker with LED Lights

Wireless Handheld Microphone

Speaker Stand, 1.7’ ft.

Remote Control

Audio Connection Cable

Wall Power Cable

Technical Specs:

Model Number Reference: PSUFM1280B (SP3189-BKA)

Power Output: 700 Watt MAX

Sound System: 12” Woofer, Horn Treble

Wireless Microphone Type: VHF Band

Frequency Response: 120Hz-15KHz

Sensitivity (1w/1m): 650mV

Impedance: 4 Ohm

Maximum SPL: 128dB

Dispersion (@6dB): H90 V50

Crossover: 3kH LF: 120Hz-4kHz, HF: 4KHz-15KHz

LED Lights Power Switch: ON/OFF

Maximum USB Flash / Micro SD Memory Card Support: 32GB

Microphone Battery Operated: Requires x 'AA' Batteries, Included

Remote Control Battery Operated: Requires x 'AAA' Batteries, Included

Rechargeable Battery: 11.1V Li-ion Battery, 18000mAh - 19.98Wh

Power Supply: 110/220V

Unit Dimensions (L x W x H): 13.7’’ x 12.9’’ x 26.3’’ -inches

The Pyle Disco Jam 2 Stereo Speaker Systems were made to pump up the party. Play your favorite tracks as loud as you want and with wireless style. Built-in Bluetooth wireless streaming allows you to instantly play your music and it works with all your favorite devices like smartphones, tablets, laptops and computers. Listen to FM radio, or stream music via USB flash drive, SD memory card or connection via Aux (3.5mm) input. Disco Jam speakers feature impressive high-power output and flashing DJ lights that will add life to any occasion. Use them at home, on stage or in the auditorium. They're perfect for any get together and will make you feel like a true DJ once the music plays. The PSUFM1280B features 700 watt output, 12'' subwoofers, 120Hz-15KHz frequency response, treble bass echo volume controls and plenty more sound-pounding and party-pumping features. Get the party started with the Disco Jam Speaker Systems.

• POWERFUL 700 WATTS: Pyle portable 12-inch subwoofer speaker system is equipped with 700 watts power. It also features full range stereo sound reproduction and treble bass echo volume controls for impressive bass response
• FLASHING DJ LIGHTS: Pyle high-powered active speaker tower features multi-colored LED party lights. It has LED lights power switch ON/OFF. Built-in convenient carry handle, wheels and rechargeable battery for portability
• WIRELESS BLUETOOTH STREAMING: Pyle DJ dance speaker has an instant wireless music streaming ability. It features simple and hassle-free pairing that works with all of today’s latest devices such as smartphones, tablets, laptops, computers, and etc.
• AUDIO RECORDING MODE: Pyle portable PA speaker system features one button record activation. The product can record audio as streamed through the speaker system and via microphone. Perfect for karaoke, crowd control, and even public gatherings
• 4 MEDIA INPUTS: Pyle PA loudspeaker offers micro SD card, MP3 and flash USB connectivity. Simply load your card or flash drive and connect to your unit to get started. It also comes with FM Radio and wireless handheld microphone.

User questions & answers

Question:	What brand of wireless mike
Answer:	I only have the Sony SB 10 but I want to buy the Sony SB 12 What’s putting me off is people have told me that if you want to listen to both of speakers at the same time for stereo sound you have to go through the process to pair Them up again each time with the phone. Can somebody please answer this question is that the way this speaker supposed to be? Each time you turn them on Do you have to pair together in order to have Stereo sound? Or did my friend ended up having a defective pair of speakers?
Question:	can you turn the lights off
Answer:	Why in the world would you connect headphones to a speaker? Just connect your headphones to your ipod touch!
Question:	I purchased two of these, am I able to connect them so I can play music from one phone on both speakers at the same time
Answer:	Based on Laura M’s comment, I already had an XB10 and ordered the XB12 and have not been able to use it as a second speaker :( ... the manual says you need to have the same model # in order to use as second speaker. I wish I had thought to read the manual for XB-12 before I bought it. I will have to return it now.
Question:	Do the stand comes with this Bluetooth speaker for the
Answer:	a theater or a drive in fast food and where? More info please?

Product features

About Us

Pyle was founded in the 1960s as a manufacturer of high-quality advanced woofers. Our reputation quickly grew as customers around the United States used our products and recognized the power of our scientifically-tuned woofers and drivers. Soon, the Pyle Driver, our original speakers, became a household name.

In the late 20th century, Pyle established itself as a premium source for replacement speakers and car audio. By the year 2000, Pyle had undergone a massive transformation, expanding into the nascent market spaces of car audio, home audio, marine audio, and professional audio & musical instruments - our Pyle Pro line.

Product description

Take your car, marine, or ATV audio to new heights with the awesome power and performance of a subwoofer that isn't afraid to get a little wet the Polk Audio DB+ 12 Inch 1110 Watt 4 Ohm DVC Marine Subwoofer. This subwoofer features a low profile design for more bass in less space, as well as Dynamic Balance technology, a IP56 marine rated design, a UV resistant polypropylene cone, and a waterproof santoprene surround. Boasting 370 watts of RMS power, frequency response of 26Hz 200 kHz, impedance of 4 ohms, and sensitivity of 86 dB, you can count on this sub to deliver consistent, powerful bass every time.

• 12 inch high performance subwoofer for your boat, car, or ATV, with 370 watts of RMS power handling
• Put heart thumping bass in your vehicle by land or sea
• Low profile design saves space needed for sub enclosures
• Features Dynamic Balance technology for richer, cleaner, more full range sound
• IP56 marine rating makes this sub resistant to water, dirt, salt fog, UV, and humidity

User questions & answers

Question:	Specs says total impedance is 4 ohms
Answer:	Without a doubt, yes. I have the DB6501's and it powers them beautifully.
Question:	Is this also for home theater subwoofer replacement
Answer:	No it doesn't. But to be honest, I have been doing car/marine audio for a long time and i dont know any amp that comes with a amp kit. I have seen pricing bundles with the two together.
Question:	Does it require a sealed box or is it free air sub
Answer:	Depending on how you wire them, yes.
Question:	Can anyone confirm the full outside diameter of this 12 inch subwoofer including the metal mounting area
Answer:	Polk says in their information that it stands up to the elements however I just fried my PAD 1001.1 sub amp (sister to the 4 ch amp). Had the toon moored and it rained all night. Water was sitting on the sub amp, protection light was on. No water was on the 4 channel amp. The sub amp when I pulled it apart had corrosion or green/sludge in small amounts along the edges of the board. Both of these amps were new. I ended up pitching the sub amp but the 4 ch amp still plays on strong! In my opinion the amps MUST be installed in a dry place with ventilation especially if your dropping the ohms down to get more output. I installed this system based on the location of e battery's and the boat dealers advice. It's a much better Instalation that a professional shop and every detail was taken into consideration. So I am not totally confident that this brand is as marine environment proof as they say. I will be yanking it out and reinstalling this and the new sub amp in a place where there is zero chance for water. That said this amp rocks I would highly recommend based on clear clean power. It sounds a lot better than my alpine system in the motor home. My system- marine alpine single din, Polk 4 ch amp running 4 ohms with the senate speakers that are a step up from the 6.5 coax (the crossover in these speakers make a significant difference!!)! PAD 1001.1 sub amp running at 1ohm (1300) watts, and a single 12" wet sounds subwoofer. I have compared this system with some of the larger OE wetsound systems and mine blows it away. I done listen to it that loud but rather wanted a clean and clear system. So buy that amp but put it in a dry place with ventilation. It rocks! Boat is a 2013 Bennington GSR 2550 with ESP.Chris

Product description

Super high performance and professional car audio

Comes with AGU fuse ?60A? to protect amplifier

This Complete Amplifier Installation Kit includes all the necessary hardware and wire to power one amplifier.,

It is designed for car audio systems up to 800 watts.

The included premium cable is made from 100% oxygen-free copper

and is true-to-gauge for ultimate power transer.

• 14.7ft 10GA Red Power Cable,1.7ft 10GA BROWN Ground Cable
• 14.4ft 18GA Blue Remote Cable,14.7ft Gold RCA Interconnect Cable
• AGU Fuse Holser
• Connecting Terminals/ Wire Ties