14 best awg cars

• Made with pure copper, our 12ga wire contains 100' red and 100' black wires bonded together
• Our 12 gauge copper wire pulls apart easily and is unmarked for a solid & sharp black/red wire look
• Resistant to oil and gas, our automotive wire 12 gauge has GPT/PVC insulation (-40deg F to 176deg F)
• Built to last, our 12 awg wire is made with 100% premium stranded copper auto wire
• Our 12 awg power wire is perfect for your home theater audio, amplifier, car radio, robotics & R/C

User questions & answers

Question:	Is the jacket/insulator marked 12AWG along its full length
Answer:	Dear Customer, The voltage of the fryer oven is 120V, hope this info could help you. Thank you for your question.
Question:	What is the od of the wire with insulation in mm? i need some that is 4.5mm
Answer:	Dear customer, the temperature adjusts from 101℉-428℉ allowing you to fry multiple foods.
Question:	what is the voltage rating on this wire
Answer:	I thought the same thing but my recipe book and instructions were hiding in the box between the styrofoam and the box. Be sure to remove everything from the box, there are other parts I found on the bottom of the styrofoam. I also purchased an accessories pack that had more recipes. To change the temperature and cook time on the unit, press the set button and the plus/minus buttons. There are presets which are explained in the instructions, but honesty the instruction book was not much help.
Question:	Can this wire be buried directly or would it need conduit
Answer:	Call the manufacturer, although your best bet is too call Amazon customer care. They’ve been a great help to me.

Product description

Why Choose QLOUNI Battery Terminal Connector?



Premium Zinc Alloy material for excellent signal transfer and high electrical conductivity. Also protect battery post against corrosion.



There are four different sizes of a wiring outlet to work with 2/4/8/10 AWG gauge input.



Positive & Negative Terminal

Positive (19mm) Battery Terminal Connector + Negative (17mm) Battery Terminal Connector.



Clamp Cables

The clamps are designed to hook up multiple cable together, cables are held in with a screw and make a super connection.



Bonus spacer shims&covers



Package Included:

1x Negative Terminal

1x Positive Terminal

2x Spacer Shims

2x Car Battery Terminal Covers

2x Allen Wrench



NOTE:

The Hole of The Positive Terminal is 19mm, The Negative is 17mm, The Positive is Bigger than The Negative

• 【Clamp Wire Tightly】These Car Battery Terminal Connectors are actually a tight fit and multiple ways to hold the wires. Look great and handy when connecting multiple size wires to the same terminal
• 【High Quality】Zinc Alloy Material for Strong Electrical Conductivity, Super Corrosion Resistance, Reduce Current Transmission Loss. Also protect battery post against corrosion for long battery life time.
• 【Easy To Install】2/4/8/10 Gauge Inputs. Gold Screws Terminals Hold Cables Securely in Place. Easy to replace, fast installation, good conductivity.
• 【Positive Negative Terminal】Positive (19mm) Battery Terminal Connector + Negative (17mm) Battery Terminal Connector. 2 copper spacer shims provided in case the posts aren't big enough, also the copper material is more conductive and flexible
• 【What you get】Package Include 2 x Battery Terminals Connectors, 2 x Adjustable Shims, 2 x Protective cover, 2 x Wrench.

• Use selection tabs above to select cable gauge size and cable length and insulation color. Available in 8 Gauge through 4/0 Gauge. Please refer to the photo gallery for a technical specification chart (amperage, voltage, stranding, insulation and copper thickness, etc.)
• WindyNation Power-Flex Cable is fully annealed PURE copper, flexible (high copper strand count), with a tough, solvent resistant EPDM insulation jacket. REFER TO THE PHOTO GALLERY FOR A DETAILED SPECIFICATION CHART
• Copper cable is fully annealed per ASTM standards. Complies with SAE J1127.
• Rated up to 600 volts, -50°C to +105°C (-58°F to +221°F).
• IEC and RoHS compliant

User questions & answers

Question:	iam looking for #8 awg fine stranded super flexable wire in 50' rolls black in color
Answer:	Yes
Question:	I would like to connect two 12v lithium batteries in parallel. Each battery is 125 ah and they are about 6-8 feet apart. What gage wire should I buy
Answer:	The wire comes in a zipcord format that is about 4.1mm thick by 9.8mm wide. The individual conductors with insulation are slightly oval and about 4.6mm at their widest dimension.
Question:	Could you bend this into a type of "cage" with hooks on it to hold a big jug
Answer:	It is automotive hookup wire for 13.8 volt DC applications at 20 amp capacity. I am successfully using it on my 24 volt solar panels with excellent results.
Question:	Can I use for 400 ah battery bank and 3000 watt inverter
Answer:	No, it would need conduit but this type of wire is also not designed for conduit. Check with your local hardware store for something that meets your needs.

Product features

Power-Flex Welding and Battery Cable

WindyNation's Power-Flex welding and battery cable is a highly flexible industrial grade electrical cable. A high strand cable count combined with a soft, pliable EPDM insulation results in a flexible cable every time. Our cable is resistant to tears, cuts, abrasion, water moisture, and oil based solvents.

Whatever your project may be, WindyNation has the cable for it.

Manufactured In The USA

WindyNation's Power-Flex welding and battery cable is manufactured in the USA. Each cable that leaves our warehouse is precisely cut on an automated robotic cable processing machine and double checked for quality and accuracy before it is shipped out to our customers.

Product description

WindyNation's battery cables are manufactured using our Power-Flex Welding cable, which is a highly flexible industrial grade electrical copper cable. WindyNation's battery cables are excellent for battery bank wiring, inverter cables, grounding cables, RV & car wiring applications, golf cart wiring, and any other application where a highly flexible pure copper conductor is required. Our battery cables are available with pre-attached cable lugs with 5/16" or 3/8" diameter mounting holes. Polyolefin heat shrink tubing is applied at the cable lug attachment point to form a protective seal.

• Manufactured with ultra-flexible WindyNation Power-Flex Cable
• 100% fine stranded PURE COPPER cable for high amperage applications
• Copper cable lugs are tinned coated and utilize a closed end design for corrosion protection
• Polyolefin heat shrink tubing applied to form a protective seal.
• Includes one black cable and one red cable. Simply select cable length and cable lug mounting hole diameter for cable ends.

User questions & answers

Question:	Are the lugs crimped or soldered? Thanks for your time
Answer:	No, for battery interconnects you need 2/0 AWG For a 3000 watt inverter ~10 feet you need 4/0 AWG

Product features

Power-Flex Battery Cable

WindyNation's Power-Flex welding battery cable is a highly flexible industrial grade electrical cable manufactured to the highest standards right here in the USA! A high strand cable count combined with a soft, pliable EPDM insulation results in a flexible cable every time. Our cable is resistant to tears, cuts, abrasion, water moisture, and oil based solvents.

Pure Copper Tin Coated Cable Lugs

WindyNation's pure copper tin coated cable lugs are heavy duty, pure copper, and meet the standard for UL486 WIRE CONNECTORS AND SOLDERING LUGS. Our cable lugs are ideal for marine and humid environments because the tin coating protects the copper cable lug from corrosion and oxidation. If you need cable lugs for an outdoor installation on your RV, boat, car, truck, golf cart, off-grid wind or solar installation, then WindyNation's tinned lugs are your go to choice!

Splice

Cables are precisely cut and stripped on automated robotic cable processing machines.

Crimp

Cable lugs are attached using a 6 ton pneumatic crimper with custom dies, resulting in an ultra-strong, non-removable crimp.

Insulate

After crimping, polyolefin heat shrink tubing is applied to eliminate the possibility of moisture or chemicals penetrating into the lug/cable interface.

Made In The USA

WindyNation is one of the nation’s largest manufacturers of assembled inverter cables in the USA. We manufacture hundreds of thousands of inverter cables every year at our headquarters in Ventura, CA.

• HEAVY-DUTY AMERICAN DESIGN: Unlike all those cheaply-made battery cables, the Spartan Power Made-in-USA 4 gauge battery cables are PVC insulated and professionally cut, crimped & heat shrunk in Reno, NV!
• FOR A LIFETIME OF SERVICE: Your inverter 4 AWG battery cables are not only sturdy & flexible, but they also feature 420 strands of 100% pure copper cable and 5/16" lugs pre-assembled on both ends.
• ONE SET OF BATTERY WIRES, UNLIMITED USES: The Spartan Power 2ft positive and negative cables are ideal for car automotive, solar, marine, RV, motorcycle, lawn/garden equipment or power inverter batteries.
• FIND A CUSTOM SOLUTION: Don't need two cables? Need only a positive or ground wire? Find exactly what you need in our huge collection of premium-quality automotive battery cables and accessories.
• LIFETIME CRIMP WARRANTY: We believe these are the best 4 AWG battery cables on the market today, if you ever experience a crimp failure, Spartan Power will gladly repair or replace your cables for free!

User questions & answers

Question:	Will these work to replace the cables on a 2007 h-d fxd super glide
Answer:	Yes, these would be a good replacement battery cable for a harley davidson super glide motorcycle.
Question:	Can i just bolt these to my existing ones to extend them, instead of slicing
Answer:	Yes, it is possible but not recommended. Better to just have the correct length cables. You don't want an openly expose positive cable connection that may accidentally grounded causing a electrical short.
Question:	I’d it 2 ft each or 1 ft each
Answer:	the 2 foot 4 AWG cable set would be QTY 1 2ft red and QTY 1 2ft black.
Question:	My powerpole connectors are 10 guage for my goal zero 400. How can i get these connectors in 10 guage wire ? If not, what guage would work properly
Answer:	In wire sizes the smaller the wire number the larger the size of the wire. Any size wire # 10, 3 8, # 6, # 4 wire size will work fine in your application. The larger the wire, the more current it will carry.

Product features

Congratulations, you've finally found great battery cables!

Spartan Power 1 foot 4 AWG battery cable sets come professionally assembled with 5/16" ring terminals or alligator clamps and are perfect for connecting up to a 1500 watt power inverter to a battery bank or tieing batteries together. You can also use Spartan Power battery cables for replacement automotive, motorcycle, RV, camper, travel trailer & other vehicle wiring applications, grounding cables, golf carts, car audio stereo amplifiers, solar and many other DC applications. These 100% pure copper cable sets come with adhesive lined irradiated polyolefin (PO) heat shrink, which is exceptionally resistant to water, fungus, and UV light.

All Spartan Power battery cables are Made in America by workers who take pride in their work every day.

Need a different size or just a single red or black cable?

Great battery cables start & end with great materials! Do your homework before you buy, you get what you pay for!

Battery Cable & Wire Features:

• Made in the USA
• Polyvinyl-chloride (PVC) insulation
• 90°C MTW - UL & CSA 105°C
• Voltage rating: 600 volts
• VW-1 & moisture resistant

 

• ★【12 AWG Silicone Wire】Premium 12 Gauge Wire 10ft Red & 10ft Black (Separated) All gauge silicone wire available in Shonsin amazon store from 6 gauge to 26 gauge.
• ★【Extra Flexible】 The combination of 680 strands 0.08mm copper conductor (3.41mm2) & silicone insulator yields the most flexible wire construction.
• ★【High Temp Wire】Temperature Rating: -76℉~ +392℉(-60℃~+200℃), Voltage Rating: 600Vac, Current Rating: 36 Amp
• ★【Silicone Insulator】 Resists high & low temperature, water, oil, chemicals and abrasion. Silicone insulation will not melt when exposed to high temperatures.
• ★【Silicone Insulator】 Resists high & low temperature, water, oil, chemicals and abrasion. Silicone insulation will not melt when exposed to high temperatures.

User questions & answers

Question:	Is the 50' spool one 50' piece or two 25' pieces
Answer:	You know that is a Good Question not sure they are well done though quality cable. i will have to look if its a Crimp or soldered.
Question:	Can this wire be used for speaker wirer for a 10 inch subwoofer
Answer:	Here you go: https://www.amazon.com/dp/B01MTAMIWT?th=1
Question:	This wire diameter is 8 mm as listed on the package. this corresponds to 0 awg, not 6 awg. i'm looking for actual 6 awg gauge wire
Answer:	You can find some online calculators that will help you out, but first, you have to figure out how much amperage you need to supply. Then you calculate the "drop-off" and match that up with the resistance of the wire. Just like that, bobs your uncle.
Question:	Is this the correct wire to wire a ceiling fan? TIA
Answer:	I can, make a jig.

Product features

Why SHONSIN Silicone Wire？

• 6 gauge to 26 gauge silicone wire available in SHONSIN store.
• 100% Copper Conductor: Oxygen Free Copper conductor features wonderful conductivity.
• Silicone Insulator: As a Thermoset material, silicone will not melt when exposed to high temperatures.
• Ultra Flexible: The combination of many strands 0.08mm OFC copper conductor & silicone insulator yields the most flexible wire construction.
• Resistant High & Low Temperature: -76℉ to 392℉ ( -60℃ to 200℃ )
• Voltage Rating: 600V
• RoHS Compliant

Why Silicone Insulator ?

• SHONSIN Silicone Wire standard temperature range is -76℉ to 392℉ ( -60℃ to 200℃ ). In most applications, it may be heated from 180 to 200°C for a year and is also very flexible at extremely low temperatures (stiffening temperature of approximately -115°C).
• Compared to Thermoplastic material (like PVC), silicone insulation will not melt when exposed to high temperatures. If the insulation melts, this may cause a short circuit which is very dangerous. Shonsin high temperature silicone cable is resistant to high temperatures and will not melt.

• Sky High Car Audio 10 ga AWG CCA speaker wire.
• 100 ft length
• Comes cut from spool and does not include the spool itself.
• -All items ship same to next business day priority mail and will be to your door in 1-3 days.
• -If you have any questions feel free to ask.

User questions & answers

Question:	Is this solid copper wire strand
Answer:	You are confusing outer diameter with that of the conductor.
Question:	Can I use this wire to connect a 100 watt solar panel to my rv battery
Answer:	No! Use building wire like you're supposed to. There's no reason to jeopardize the safety of your living space by using something inappropriate- especially something as cheap as a length of the proper wire.

Product description

4 GAUGE BLACK & 4 GAUGE RED COPPER CLAD ALUMINUM - 25FT EACH COLOR (50FT TOTAL) - HAND ROLLEDNOT AMERICAN GAUGE, SLIGHTLY UNDER AWGVERY LOW RESISTANCEHEAVY AND FLEXIBLE INSULATION JACKETUSE FOR POWER OR GROUND WIRE TO CONNECT YOUR 6 TO 80 VOLT APPLICATIONSGAUGE: 4 (SLIGHTLY UNDER AWG)LENGTH: 25FT BLACK + 25FT RED (50FT TOTAL)WIRE COLOR: BLACK & REDBRAND: AUDIOPIPETHIS IS NOT AWG AMERICAN WIRE GAUGE Click here for more available information regarding wire specs

• 4 GAUGE BLACK & 4 GAUGE RED COPPER CLAD ALUMINUM - 25FT EACH COLOR (50FT TOTAL) - HAND ROLLED
• NOT AMERICAN GAUGE, SLIGHTLY UNDER AWG
• VERY LOW RESISTANCE
• HEAVY AND FLEXIBLE INSULATION JACKET
• USE FOR POWER OR GROUND WIRE TO CONNECT YOUR 6 TO 80 VOLT APPLICATIONS

User questions & answers

Question:	Is this real thick stuff like jumper cables are made of ? I need to wire a winch to my battery & wondering if this will work
Answer:	Its about the same thickness as a jumper cable but the copper inside is not the same. There will be many more smaller strands than in Jumper cables. This wire will conduct better than jumper cables. To be more confident go to the link below. You should be able to cross reference the power draw from the winch and the length of wire you need to get the preferred combination.http://www.crutchfield.com/S-Hc0dwXT6rq8/learn/learningcenter/car/cable_gauge_chart.html
Question:	Is the wire coated in more of a rubber or a plastic coating
Answer:	plastic PVC
Question:	how many strand total is this wire
Answer:	816 copper strands
Question:	Is this 4 ga. wire ok to use for upgrading the pos & neg battery connections on my 96 chevy truck
Answer:	No, get proper automobile battery cables. This is designed for car stereo amplifiers. The heavy load put on a battery cable when starting will risk melting the cables and possibly a fire.

Product description

When your car or truck needs a boost, the Cartman Extra Heavy-Duty Booster Cables are the safest way to transfer power from a 12/24-volt automobile battery. The easy-to-use, no-tangle cables have T-Prene coating for flexibility and easy storage. They feature special clamps with triple-polarity identification that is color-coded. The clamps also have an ergonomic design that is easy to use on top-post and side-terminal batteries.

Extra Heavy-Duty

Booster Cables

At a Glance:

T-Prene coating keeps cables flexible down to -25C/-13F

Cables work with top-post and side-terminal 12/24-volt batteries

2-gauge, heavy-duty, no-tangle cable construction

Ergonomically designed with shielded surfaces for safety

UL listed; RoHS compliant

The 2-gauge, heavy-duty cables are the strongest consumer grade available.

Heavy-Duty Cable Construction Resists the Elements

The booster cables are insulated with T-Prene coating, which is designed to remain flexible down to -25C/-13F. The 2-gauge, heavy-duty cables are the strongest consumer grade available, and they resist motor oil, rain, and chemicals for dependable use.

Available in 20 feet, will easily reach from one battery to another, whether you're working on a car, truck, or SUV.

What's in the Box

2-gauge booster cable

Woking gloves

Carry case

END

• 5 Year Warranty!
• Sufficient CCA (Copper coated Aluminium). For 600Amp use. Over 50% greater conductor than of a 4 Gauge.
• Ideal for use with full size pickup trucks, large recreational vehicles and freight hauling vehicles.
• Fits top and side post batteries; Luxurious carry bag for free. Patented design of inside tongue for double connection with battery terminal.
• TPR material of cable, low temperature immunity (-25C/-13F)

User questions & answers

Question:	Can anyone tell me the approximate dimensions when it's packed into the included carry bag? Want to know if it'll fit in the plastic bin in my trunk
Answer:	its packing size is 27*9*28cm
Question:	Where are these manufactured
Answer:	It's made in China. But approved at UL office.
Question:	Are the wires copper coated
Answer:	Most of the homes with aluminum wire had to have all their wiring replaced. It was a fire hazard disaster. If you are serious about getting a car to start, spend $10 more and get all copper wires for your jumper cables. Amazon has them right here. TOPDC - $26.99. Shorter is better too since power decreases the longer the cable. For most folks, 12' will be fine.
Question:	What is the eva case mentioned for the extra few dollars
Answer:	I'm not sure that option was available when I purchased mine. If you click on the link at the top which includes the EVA case, you can see a photo of it (and click on the photos at the left.) So instead of the nylon drawstring bag, you can get the upgraded zippered case for the cables instead. Note that the cables are easy to fit in to the drawstring bag. Having not seen the zippered case, I can't say anything about it.

Product description

2 Awg HD Golf Cart Battery Cable 7 pc Set Club Car 83 & UP COMPLETE U.S.A MADE BUILT AND MADE IN THE U.S.A EACH CABLE IS HYDRAULIC CRIMPED WITH 5/16" TINNED COPPER LUGS ON EACH END. BUILT FROM CENTER TO CENTER OF LUG HOLES. CABLE USED FOR BUILDING IS HEAVY DUTY EPDM 105C WELDING CABLE MADE IN U.S.A. EACH CRIMPED END IS COVERED IN 3:1 HEAT SHRINK STRANDING IS: 364 STRANDS OF BARE COPPER RESISTANCE TO (FLAME, OIL, GREASE SOLVENTS, OZONE AND ABRASION.(ROHS COMPLIANCE) 600 VOLTS. EACH KIT CONTAINS: 5-12" BLACK 1-21" BLACK 1-21" RED ALL ITEMS AND CUSTOM BUILT ITEMS ARE SHIPPED SAME DAY OR NEXT BUSINESS DAY. WE ACCEPT VISA,MASTERCARD AND DISCOVER. PAYPAL VERIFIED authorized AUTHORIZED.

• ✅EACH KIT CONTAINS: 5-14" BLACK 1-25" BLACK 1-25" RED
• ✅EACH CABLE IS SEALED WITH 3:1 GLUE LINED HEAT SHRINK.
• ✅EACH CABLE IS BUILT USING EPDM SAE J1127 RATED WELDING CABLE
• ✅RESISTANT TO FLAME, OIL, CUTS, ABRASION, OZONE
• ✅105C TEMP ON THE CABLE

User questions & answers

Question:	I have 6 batteries how many cables do I need
Answer:	This is stranded wire
Question:	Are these cables/connectors soldered as well as crimped
Answer:	Yes you should be able to assuming this is truly 10 AWG wire, it should be rated to 40 amps, and your 100 watt panel is not generating more than 5-6 amps if 12VDC.
Question:	Will these work on an ezgo rvx - 48 volt - 2014 model year
Answer:	Mine was one 50’ piece
Question:	Will this set fit a 2013 club car precedent 48 volt, 6 8volt batteries
Answer:	Yes, cause the wire is thick enough to handle the high current from the amp.

Product description

Feature:

-- 4 Pin 16 AWG male and female waterproof connectors with 10cm(3.94inch) wire.

-- 4 position rectangular housing connector black 0.24".

-- Electrical Connector Plug With Wire AWG Marine.

-- Easy to install under soldering and crimping.

-- Use for car, truck, boat, motorcycle, and other wire connections.



Package includes:

-- 5 x 4 Pin Waterproof Connector

• 4 Pin 16 AWG male and female waterproof connectors with 10cm(3.94inch) wire.
• 4 Pin connector was made of PA66 nylon, this material has a certain thermostability, and make the plugs durable wear-resisting.
• Operating temperature -10℃~+80℃.High pressure, reliable safe connection.
• Electrical Connector Plug With Wire AWG Marine.Easy to install under soldering and crimping.
• Use for motorcycle, scooter, car, truck, quad bike, trike, caravan, marine, jet ski, boats,and other wire connections.

Product description

Bullz Audio components are designed and manufactured for the ultimate in performance and function. From cables to fuses, the entire line is carefully thought out and orchestrates cutting edge design and innovation. Color: Clear Red & Black. Comes in different lengths: 150, 200, 300, 500 (Feet). Also available in: 10, 12, 14, 16 (Gauge)

• Bullz Audio Professional Platinum Edition Speaker Cable
• 10 Gauge AWG
• Comes in Spool of 25 ft.
• Oxygen Free Cable for maximum signal transfer
• Ultra Flexible and high current

User questions & answers

Question:	Is this good for a subwoofer
Answer:	Sorry, the model you provided cannot match our product correctly, could you please provide a more correct model --by Appliancemate（Romalon）
Question:	What would be the maximum wattage push thru this wire or volts ac
Answer:	Our compatible brands are Flame Sensor for Lennox, Armstrong, Ducane Furnaces.
Question:	I’m running 2 Rockford p3’s on a 3200w amp is this wire good
Answer:	Yes, if you have the L shape and single male plug it will work on most model
Question:	oxygen free" what? copper clad aluminum, solid copper, solid aluminum? also what circular mils or mm2, 10 gauge is not 10awg w/o same area
Answer:	Yes it does work with Xbox one.

Product description

4 AWG Power, Ground and Remote Quick Disconnect. Rated up to 120 Amps. Ideal for use with active bass enclosures. Anderson connectors. Makes it easy to remove amps, batteries and other equipment quickly. Includes male and female quick disconnects with surface mounts. Screw-locking terminals for a secure connection.

• 4 AWG High Current Power and Ground Quick Disconnect with Surface Mounts.
• Rated up to 120 Amps.
• Ideal for use with active bass enclosures.
• Includes male and female quick disconnects with surface mounts.
• Screw-locking terminals for a secure connection. Makes it easy to remove amps, batteries and other equipment quickly.

• 17 Feet 4 AWG 1862 Strands Ultra Flex Red CCA(Copper Clad Aluminum) Power Wire/3 Feet 4 AWG 1862 Strands Ultra Flex Black CCA Ground Wire
• 18 Feet 16 AWG CCA Speaker Wire/18 Ft.- 18 Gauge blue Remote Turn-On Wire
• One 17 Feet Black Bassik RCA Cable made from Oxygen Free Copper (OFC)
• Heat Tested, Water Resistent InLine Fuse Holder/ 80 Amp AGU fuse
• Connecting Terminals And Accessories

User questions & answers

Question:	Will this kit work for installing rockford fosgate pbr300x4 4 channel car amplifier
Answer:	Yes, everything is ready for installation.
Question:	Will this work on a 2000 watt amp
Answer:	12×18×4×6
Question:	Will this work on a 400watt marine amplifier
Answer:	Yes it will, I mount the amp on a side of the box. And it fit perfectly.
Question:	For how many watts is this kit good for
Answer:	I don’t really remember. Maybe like 12 or 15 feet.

Product features

POWER CABLE

17FT 4 AWG CCA POWER CABLE

ture awg second generation cca for maximum power delivery

3FT 4 AWG CCA GROUND CABLE

Completes circuit for unimpeded current flow

18FT 16AWG CCA SPEAKER CABLE

Transfer clear and powerful sound

17FT TWISTED OFC RCA CABLE

made from Oxygen Free Copper (OFC) rejects noise for clear sound

1 INLINE FUSE HOLDER WITH 80 AMP FUSE

For superior protection against electrical shorts

17FT 18 AWG TURN-ON WIRE

Remotely switches on amp

General Features: