13 best arris drones fpvs

Product description

The Explorer 280 drone's settings software is INAV not Betaflight.The INAVversion is 2.5.0,and firmware name is OMNIBUSF4 and firmware verison is 2.5.0.

ARRIS Explorer280 aims at long range and long flight time for drone fpv lovers, to explore the funny things through this drone.. It is compatible with GoPro and sports camera on top. With the GPS, it can realize the height fixed, one key return to home function. With 600w stock video transmitter, the transmission range can reach to 2km. With the Frsky receiver, the control range can reach to 10km. With 3s 5000mah lipo battery, the hovering time can reach to 24minutes.

Specifications:

Diagonal Wheelbase: 280mm

Flight Controller: F4 Pro V3 flight Controller

Motor: X2206 1500KV

ESC: BLHeli_S 30A

Frame Material: Pure Carbon Fiber

BNF weight: About 356g

Camera: Foxeer HS1177 V2 camera

FPV TX: 5.8G 48CH (0mw/25mw/100mw/200mw/400mw/600mw Switchable)

Antenna: 5.8G pagoda Antenna

Package Included:

ARRIS Explorer280 280MM Fpv racing drone frame x 1

ARRIS X2206 1500KV Brushless motor x 4

ARRIS BLHeli_S 30A ESC x 4

Gemfan 7042 Propeller x 4

F4 V3 Pro flight controller x 1

BN-880 Flight Control GPS Module x1

ARRIS VT5804 Switchable video transmitter x 1

Foxeer Pagoda pro antenna x 1

Frsky Q X7 radio with R9M Module with dR9MM receiver x 1

Note: Battery for QX7 is not included.

• ARRIS Explorer280 long range drone comes with X280 frame, arris x2206 1500kv high efficiency motor, 3-4S simo BLHeli_S ESC, Gemfan 7045 two blade propeller,popular Foxeer HS1177V2 fpv camera, ARRIS VT5804V2 power switchable long range Video transmitter, Foxeer pagoda pro antenna and Frsky Q X7 radio and receiver. It is fully assembled and tested, plug and fly.
• Gemfan Flash 7042 7 Inches 2 Blade Propeller..With light blade and less moment of inertia, Gemfan flash series propellers have smooth turning performance and fast response.The polycarbonate material is dash-and-bending-resistant and leads to the best efficiency and durability.
• ARRIS 30A 2-4S BLHeli_S brushless esc is specially designed for fpv racing drones. It support oneshot, multishot and dshot300 protocals. Fast response to the throttle during the flight. Omnibus F4 PRO V3 flight controller adopts STM32F405 MCU,which increase teh operation frequency, faster response than F3. it comes with built in OSD and barometer, you can adjust the OSD in BF software, more convenient.
• BN-880 Flight Control GPS Module Dual Module Compass. With it,you can switch the mode to one key return to home. Foxeer Pagoda Pro 5.8G mini antenna. The body adopts imported PC+ABS material, can withstand high strenghth impact. Double-jacket semi-rigid cable for heavy impact resistance. Lower feeder loss, easy to install, can be bent at any angle and maintain.
• Foxeer HS1177 V2 2.8MM Mini FPV Camera.It is one of the most popular mini camera all over the world.Foxeer HS1177 V2 has compact size, vivid color ultra-low latency, as well as excellent performance under complicated conditions（great changes in brightness） due to good WDR. This FPV camera greatly improve the playability of racing drone.

User questions & answers

Question:	Drones is ready to flight
Answer:	Yes, this drone is ready to fly. Package includes battery and radio set.
Question:	Am i wrong but, in the ad it states- with 3s 5000mah lipo battery, but below we are pointed to a 4s-battery- diff voltage? correct? which one is it
Answer:	3s 5000mah lipo battery
Question:	Will this controller work with tbs crossfire micro
Answer:	The drone would need a crossfire receiver installed and your radio would need a crossfire transmitter.
Question:	Reply from gary c say 3s 5000 mah lipo battery--reply from seller hobby-wing says 4s 1500mah lipo battery?? 11volt system or 14 volt system
Answer:	4s 1500mah https://www.amazon.com/dp/B01I37E3BS?ref=myi_title_dp

Product description

p>ARRIS X220 V2 220mm FPV racig drone BNF is one of the best racing quad for freestyling. ARRIS X220 BNF comes with ARRIS X2205 2300kv high quality brushless motor,Flycolor Raptor S-Tower BHeli-S 2-4S 4-in-1 40A ESC + F4 + PDB + OSD board,Dalprop T5045C high efficiency propeller, FOXEER Razer MINI 1200TVL FPV Camera ,5.8G 48CH long range mini video TX.The receiver is optional. Before leaving the factory, the BNF is tuned and tested by the technician.

Specifications:

Diagonal Wheelbase: 220mm

Flight Controller: F4 flight Controller

Frame Material: Pure Carbon Fiber

BNF weight:329.5g

Camera:  FOXEER Razer MINI 1200TVL FPV Camera

FPV TX: 5.8G 48CH switchable VTX

Antenna: Foxeer Pagoda Pro antennaa

Flying Time: About 12 minutes (hovering)

Package Include:

1xARRIS X220 FPV Racing Quad Frame (ASIN: B071RC5LQ7)

4xARRIS X2206 2450KV V2 Brushless Motors (2CW+2CCW) (ASIN: B07PP1Y9GQ)

1xFlycolor Raptor S-Tower BHeli-S 2-4S 4-in-1 40A ESC + F4 + PDB + OSD

4xDalprop T5045C High Effiency Propeller

1xFOXEER Razer MINI 1200TVL FPV Camera

1xARRIS VT5804 48CH VTX

1xFoxeer Pagoda pro mini antenna (ASIN: B07C91QVM2)

1xBattery straps

Note: Radio, receiver, battery and Battery Charger is sold separately.

Other equipment required (not included):

Radio Set: Suggest Jumper T8SG V2 Plus (B07C181HRN)

Battery: Suggest ARRIS 4S (B01I37E3BS)

Battery Charger: Suggest Skyrc Imax B6AC V2 (B01MZ1ZZ7Z)

Goggle: Suggest Aomway Commander V1 (B0779Q3T6L)

• This is BNF version, remote controller, battery, battery charger are not include and need to be purchased separately.
• The "X" symmetrical design makes the X220 be light in weight, simple in structure, durable and agile.
• ARRIS X2205 V2 2300KV brsushless motor is upgrade to ARRIS X2206 2450KV Brushless now. It is high end brushless motor specially designed for high performance fpv racing drones.It adopts brand new M5 steel shaft, improving the structure strength. It had been upgraded to centrifugal fan design, optimizing the heat dissipation.It also adopts original Japan NSK bearing and N52 tile-shape magnets to ensure the power and quality of the motor.
• ARRIS VT5804 48CH 0mw/25mw/100mw/200mw/400mw/600mw Switchable Video Transmitter.It has stable output power, long transmission range (0.5KM+@25mW; 1KM@200mW; 2KM+@600mW with stock antenna), 6 power switchable,Output power and frequency setting can be done in OSD interface through remote controller and it weighs only 6g, perfect for fpv racing quads.
• Foxeer Pagoda Pro 5.8G mini antenna. The body adopts imported PC+ABS material, can withstand high strenghth impact. Double-jacket semi-rigid cable for heavy impact resistance. Lower feeder loss, easy to install, can be bent at any angle and maintain.

User questions & answers

Question:	If I already have the tarranis remote what else would I need to buy
Answer:	You need to have a receiver which could be compatible with Tarranis transmitter. As far as I know all the frsky receiver could work.
Question:	Can this quad take a 5s battery? Or only 4s? Thank you
Answer:	Both the ESC and motors are rated 3s and 4s.. not 5s.. Get a good battery with a high C rating.. An aggressive prop can also increase your speed.. TBS and Kiss both provide quality ESC that can take a 5s.... But you need to get ESC, Flight Controller and Motor that are rated for the higher voltage. The Arris X220 is great quad..The Arris motors are awesome.. The only thing that I have broken are the props.. They are nice aggressive props but that means they are stiff and break...Ive been using Azure props lately and they are aggressive and tuff...
Question:	How do I bind this to an eachine i6 transmitter? The transmitter is also a flysky i
Answer:	Hey there, it depends on which receiver you buy. THIS DRONE DOES NOT COME WITH A RECEIVER. My advice would be to buy a receiver that is compatible with your transmitter. The Flysky i6 is PPM (PPM (aka CPPM) is an old, analogue signal.) The most common RX (Receiver) for PPM is the Frsky D4R-II (~$25). The Frsky D4R-II is a fairly small Receiver and you'll be able to tuck it under the top plate and secure it with a zip tie. Hope this helps!
Question:	I purchased this, but when I plug in the battery, all it does is beep loudly. Do I have a bad one
Answer:	No you need to get betaflight on a computer. Once installed plug the drone into the computer with the cable that came with it. If betaflight has issues reading the drone, go on YouTube and look up a video. Also you will need to buy a reciver for it as it does not come with one.

• ARRIS Dazzle is a 5" fpv racing drone specially designed for freestyle flying.With the low gravity center design, 4mm double lower plate, 5mm arm design, it is super durable and agile for freestyle.
• The RTF drone includeds ARRIS X2206 2450KV high efficiency brushless motor, Diatone Mamba F405 with 30A 4in1 ESC Stack, T-motor T5143S 5" propeller, Rush Tank racing edition video transmitter,Arris 2.1mm 1200TVLcamera and Foxeer lollipop antenna, Frsky Q X7 radio and receiver.
• Classic True "X" symmetrical design, great flight feel for freestyle, High strength carbon fiber frame, 5mm thickness arms, super stable and durable
• Comaptible with 19x19mm and 16x16mm camera, Rush Tank VTX with Foxeer lollipop antenna gives you long fpv range.
• The drone is fully asembled and tuned by our professional technician team and bind and fly.

User questions & answers

Question:	Can I use this to take straight down pictures with a GoPro
Answer:	yes you canif you can fly in acro mode
Question:	Can i bind this radio to other drones
Answer:	If your other rc drones come with a Radiolink receiver, then it can be worked.
Question:	Does it come with the controller
Answer:	Yes awesome set up so fast you will love it invest in a good battery charger
Question:	How long is the flight time
Answer:	The flight time of ARRIS X220 220mm RC Quadcopter FPV Racing Drone RTF is about 10 minutes.

Product features

F405 Betaflight Controller with 40A 4IN1 ESC Stack

With the stack on the ARRIS Dazzle drone, the wires are tidy and concise. And it is more convenient to maintain in the future.

Specifications: Input power: 12.6-25V (3-6S) BEC: 5V/1.5A MCU: STM32F405 Gyro: MPU6000 Flash: 16MB OSD: AT7456 Continue current: 40A×4 Burst current: 40/50A (6S) Mounting hole: 30.5*30.5mm

T-Motor T5143S propeller

T-Motor T5143S propeller optimized the design of prop tip, make it more durable and smooth. One of the great choice for freestlye racing drones.

Can install gopro

GoPro 4/5/6/7 can install on the ARRIS Dazzle 5 easily on top plate. The 3D print TPU parts is optional, you can buy from here.

Product description

This is an upgraded version goggles (Updated on 2020.01.01)

Main Features:

Small size and light weight.

Low power consumption, Working current 360~400mA.

Double antenna reception to make the signal more stable.

RaceBand 40 channel, Auto-Searching.

3.0 Inch 480*320 dot high brightness LCD screen.

Built-in super sensitiveness 5.8GHz 40ch receiver, especially with RaceBand.

Built-in 3.7V/1200mAh high-capacity Li-ion polymer Battery.

Universal USB charging interface.

Real-time video return, Very low time-delay.

Support external video signal input.

Support AV signal output (Connect external DVR).

Specification:

Screen size: 3.0 Inch

Resolution: 480*320

Display Ratio: 16:9

View Angle: 6 o'clock

Brightness: 350cd/m² with high brightness backlight LED

Video delay: video time-delay less than 20ms

Lens: 4X Fresnel Lens, 92% transparent rate no distort of light

Antenna: 2 X RP-SMA male

USB Port: To charge the battery

AV Jack: External video signals input or internals AV signal output

Languages: English and Chinese

Power adapter: DC5V/1A (USB interface)

Battery: 3.7V/1200mAh,Each full charge revive around 2.5hr working time

Power Consumption:

*The device operating current of 360~400mA at 3.7~4.2V

*Built-in battery maximum charge current of 500mA

Dimension: 13.5cm * 13.2cm * 6.5cm

Weight: 183g(with headband, not included antennas)

• Small size and light weight, only 183g, easy to carry and more comfortable to wear.
• Double antenna reception to make the signal more stable.
• Built-in 3.7V/1200mAh high-capacity Li-ion polymer battery, and the longer time to enjoy your flying.
• Built-in super sensitiveness 5.8GHz 40ch receiver, especially with raceband. It’s more convenient, easier and faster under auto-searching.
• Real-time video return, Very low time-delay.

User questions & answers

Question:	Can i put a better antenna on these? also, does it have a dvr
Answer:	Yes,you put a better antenna on this 5.8Ghz FPV Goggles, and it have the DVR.
Question:	will this work with a mavic pro
Answer:	It can't work with a mavic pro.
Question:	A male sma is non standard. did it come with a male-female adapter
Answer:	Mine have rp-sma. No adapter just two chopsticks
Question:	Will goggles work with the dji spark
Answer:	No, they are incompatible.They have different frequencies.

Product description

ARRIS X-Speed 280 V2 is the upgrade version of X-Speed 280. On this version, we upgrade the motor to ARRIS S2205 2300KV,and adopts the Flycolor Raptor S-Tower BHeli-S 2-4S 4-in-1 30A ESC + F3 + PDB + OSD to instead of the separate esc and flight controller. This not only decreases the weigt of the drone, but also makes it more convenient in future maintainance. In the meanwhile, we added the 5.8G 40CH video tx and antenna on the drone. The radio is upgraded from Radiolink AT9 to AT9S 10CH radio.

Features:

1. Simple structure frame installed with tower structure ESC/PDB, easy to assemble and easy to repair.

2. The tower comes with integrated OSD, no need to install it separately

3. Beautiful outer appearance, your best gift chooice.

4. 3mm thick arms, super strong and durable 

5. Newly released high efficiency S2205 2300KV motor provides you better performance and longer working life 

6. High safety 4S 1500mah 50C lipo battery

Package includes :

1 X ARRIS X-SPEED 280 V2 Racing Drone Kit w/ Canopy

1 X Flycolor Raptor S-Tower w/ BHeli-S 2-4S 4-in-1 30A ESC + F3 + PDB + OSD (ASIN: B01MT8TWXI)

4 X ARRIS S2205 2300KV Brushless Motor (ASIN: B01J9ZGK7I)

4 X 5042 3-blade propellers  (ASIN: B01N2QGH7J)

1 X Sony 700 line camera 

1 X RadioLink AT9S Transmitter + R9DS Receiver (ASIN: B0152VO92G)

1 X X-SPEED 280 Stickers

1 X ARRIS TS5832 5.8G 40CH video TX

1 X Foxeer 5.8g antenna

1 X ARRIS 4S 1500mah Lipo Battery (ASIN: B01I37E3BS)

Other Accessory Required (Not Include):

Charger: Imax B6AC V2 Charger (ASIN: B01MZ1ZZ7Z)

FPV Goggle: Fat Shark Dominator V3 (ASIN: B0158DGNBS)

• This RC drone is fully assembled, tuned and tested before leaving the factory. Plug the battery, then it can fly.
• It comes with Raptor S-Tower BHeli-S 2-4S 4-in-1 30A ESC + F3 + PDB + OSD, greatly reduce the wiring messing.
• It also comes with radiolink AT9S transmitter + 5.8G fpv video TX + 4S lipo battery + camera + antenna. 100% ready to fly.
• brand new ARRIS 2205 motor and 5042 propeller can work perfectly and offer highest performance.
• It flies very fast. You can enjoy the flying fun with this amazing fpv racing drone.

User questions & answers

Question:	Does this come with a remote
Answer:	Yes, it comes with a radiolink AT9S radio set.
Question:	Can you add gps to this drone
Answer:	We don't recommend you add GPS on this drone, since this quadcopter comes with F3 flight controller, and it can't support the GPS device well.
Question:	Ours quit working and fell from the sky. What can we do
Answer:	Make sure your settings are right in Betaflight .
Question:	does it have an acrobatic mode
Answer:	Yes, it has.

Product description

ARRIS X-Speed 250B V4 RTF (ready to fly)is the upgrade version of the V3. The remote controller upgrade to Radiolink AT9S, the flight controller upgrade to F4 and the camera upgrade to the ARRISHOBBY Cat FPV camera. It is one of the best fpv racing drone for fpv beginners. With the 4mm carbon fiber arms and resonable structure, it is super durable and consistant to crash. It is fully assembled, tuned and tested, plug the battery, it will fly.

Specifications:

Dimension: 7.88 x 9.35 x 2.63 (inches)

Diagonal Wheelbase: 268mm (10.55inches)

Flight Controller: F4 flight controller

Frame Material: Carbon/glass fiber composited sheet

BNF weight: 400g

Radio System: RadioLink AT9S radio with Receiver

Camera: Arrishobby Cat fpv camera

FPV TX: 5.8G 200mw 32CH

Antenna: 5.8G Antenna

Flying Time: 10min hovering

Battery: ARRIS 4S 1500mah lipo battery

Package Includes:

1 xARRIS X-Speed 250B V3 Racing Quad Frame

2 xARRIS S2205 2300KV Brushless Motors CW

2 xARRIS S2205 2300KV Brushless Motors CCW

4 xARRIS 5045 3-blade Propeller (2CW + 2CCW)

1 xFlycolor S-Tower w/30A 4 in 1 ESC + F4 + OSD + PDB

1 xFoxeer HS1177 V2 Fpv Camera

1 x5.8G 200mw 32CH FPV TX

1 xFPV Transmitter Antenna

1 xRadiolink AT9s Transmitter + Receiver

1 xLED

1 xARRIS 4S 1500mah Lipo Battery

 

Battery Charger is sold separately.

• Simple structure frame installed with tower structure ESC/PDB, easy to assemble and easy to repair. Big inner space, 268mm wheeabase, 6inches propeller and other equipements is compatible.
• The tower comes with integrated OSD, no need to install it separately. The angle of the FPV camera is adjustable from 0 to 45 degree. 4mm thick arms, super strong and durable
• Newly released high efficiency S2205 2300KV motor provides you better performance and longer working life. High safety 4S 1500mah 50C lipo battery

User questions & answers

Question:	I need to replace the pcb. i do not see one on amazon. we're can i get one
Answer:	Hobby-wing.com. I think I bought the last one on Amazon. Also arris-hobby.com. Expect about 20 days total. I would also buy 2 extra arms, extra screws and you should be good.
Question:	why do I need another TX antenna when this comes with one already for fpv
Answer:	You don't need more TX.If you want to finish FPV, you only need goggles(monitor) and receiver that is OK.
Question:	Downloading the manual is no help. I want to know how to arm the x-speed. Please do not tell me to download the manual again
Answer:	If you got the X-Speed 250B with the AT-9 controller, and you haven't used open flight or any other program to reconfigure from stock out of the box setup then all you need to do is: Power up the AT-9. Power up the X-Speed 250B. ARM by moving the three way switch G from safe (Up or Facing away from user) to center. ARM (Acro) move G from center to Down or Facing user. Hope this helps
Question:	Hey Hobby-Wing which drone do you recommend me if i want to use goggles? I know they are sold separately but which one is ready out of the box
Answer:	Hello,We rocommend ARRIS X-Speed 250B 250mm Quadcopter Racer FPV Racing Drone RTF With F3 Flight Controller + HD Camera + FPV TX + Radiolink AT9 Transmitter to you.Now the flight controller has updated F3 that has more function and faster arithmetic speed.

Product description

What's new with the ARRIS X220 PRO V2 Version?

1. The fight controller is upgrade from F3 to X-Tower F4 flight controller.and arris  RS2306 2400KV motor replace to RCinpower GTS V2 2306 2750KV motor.

2. The ESC is upgrade from the 30A 4IN1 ESC to 40A 4IN1 ESC with BLHELI-S firmware, which supports Oneshot125 , Oneshot42 and Multishot,Dshot150, Dshot300 and Dshot600

3. The VTX is upgrade to ARRIS VT5804 48CH 0mw/25mw/100mw/200mw/400mw/600mw Switchable Video Transmitter with better signal and longer range.

4. Add the LED on the tear of the quad.

5. Antenna is upgrade from 4-leaf antenna to Pagoda one.

It is assembled and tested before leaving the factory. When you receive it, you need to install your own receiver (ARF)on it or bind with your own radio(BNF) and do some settings in Betaflight, then you can fly.

Specifications:

Diagonal Wheelbase: 220mm

Flight Controller: F4 flight Controller

Frame Material: Pure Carbon Fiber

BNF weight: About 356g

Camera: Runcam Swift 2 FPV camera

FPV TX: 5.8G 48CH (0mw/25mw/100mw/200mw/400mw/600mw Switchable)

Antenna: 5.8G pagoda Antenna

Flying Time:about 10 minutes hovering

Package Include:

1 x ARRIS X220 FPV Racing Quad Frame (ASIN: B071RC5LQ7)

4 x RCinpower GTS V2 2306 2750KV motor

1 x Flycolor X-Tower F4 Flight Controlle BHeli-S 2-4S 4-in-1 40A ESC + F4 + PDB + OSD

4 x ARRIS 5045C 3-blade Propeller

1 x Runcam Swift 2 FPV Mini Camera

1 x ARRIS VT5804 Switchable VTX (ASIN: B07BM24JLB)

1 x Foxeer 5.8G pagoda pro antenna (ASIN: B07C91QVM2)

1 x ARRIS Buzzer

2 x Battery straps

Note: Remote Controller,Battery and Battery Charger arsold separately.

• This is BNF version, remote controller, battery, battery charger are not include and need to be purchased separately. We have RTF, please seach ASIN: B074TDGSMQ or B071RM396H.
• It comes with Flycolor X-Tower F4 Tower comes with BLHei-S 4-in-1 40A ESC and F4,PDB and OSD board, and it's more convenient to maintain.
• The "X" symmetrical design makes the X220 be light in weight, simple in structure, durable and agile.
• Foxeer Pagoda Pro 5.8G mini antenna, lower feeder loss, easy to install, can be bent at any angle and maintain.
• ARRIS VT5804 48CH 0mw/25mw/100mw/200mw/400mw/600mw Switchable Video Transmitter with better signal and longer range.

User questions & answers

Question:	You specify bnf.....what receiver is included per your description
Answer:	The R6DSM receiver.
Question:	So if i have a radiolink remote already this quad can bind and fly
Answer:	put your radiolink reciver ON and go to beatflight set up failsafes { ARF]almost ready to fly
Question:	Can I use the frsky taranis x9 lite with this drone out of the box
Answer:	This drone doesn’t come with a receiver so you will need to buy one that is compatible with your Taranis
Question:	What is the model # for the rtf version? what receiver does is come with
Answer:	Here is the link for the RTF version: https://www.amazon.com/dp/B074TDGSMQ?ref=myi_title_dp It comes with the R6DSM receiver.

• Note: We have upgraded the ARRIS X2205 V2 2300kv brushless motors to ARRIS AR2206 2450KV brushless motors, since Amazon has mixed the two versions stocks, we do not accept orders for the specific version, hope you can understand. Please contact us freely if you have any further questions.
• This is an ssembled RTF version, with Radiolink AT9S radio set and high quality 4S lipo battery. Each drone has been well-calibrated and pre-flied.
• The "X" symmetrical design makes the X220 V2 be light in weight, simple in structure, durable and agile.
• It is assembled with the latest Flycolor Raptor S-Tower, which has built-in BLHei-S 4-in-1 40A ESC, F4 flight Controller, PDB and OSD.
• Pre-assembled Foxeer Arrow Mini Pro FPV camera is the most popular fpv camera in the market, which works well in the fast change of the dark and bright environment.

User questions & answers

Question:	What goggles work with this drone
Answer:	Eashine ev 800 goggles work well but any 5.8 ghz goggles will work
Question:	Whats the estimated battery time
Answer:	8-12 minutes. It depends on how you fly and the quality of battery you use.
Question:	Does it come with a battery and charger
Answer:	Battery only no charger
Question:	Can I get this quad by itself? I don't need the controller
Answer:	Yes, please contact us through Amazon Message directly.

Product features

Flycolor Raptor S-Tower comes with BLHei-S 4-in-1 30A ESC, F4 Flight Controller,PDB and OSD.

The ESC comes with EFM8BB21F16G MCU, support Dshot / Multishot / Oneshot,support high KV motor, can support at most 500k eRPM.Dshot is digital signal, anti-interference ability is stronger, and do not need throttle calibration.



The default firmware of the F4 is Betaflight_OMNIBUSF4SD,it supports PPM,SBUS,SPEKTRUM 1024/2048 etc. remote control / receiving mode. Built-in current meter, OSD directly display the real-time current without any additional connection.



With the tower on the ARRIS X220, the wires are tidy and concise. And it is more convenient to maintain in the future.

ARRIS X2205 V2 + Dalprop propeller

ARRIS X2205 V2 2300KV brsushless motor is high end brushless motor specially designed for high performance fpv racing drones.It adopts brand new M5 steel shaft, improving the structure strength. It had been upgraded to centrifugal fan design, optimizing the heat dissipation.It also adopts original Japan NSK bearing and N52 tile-shape magnets to ensure the power and quality of the motor.



DALPROP cyclones T5045C series propeller is newly released high end dynamic balanced prop for fpv racing drones.

The propeller is made of imported PC,the strength is high, and the root is thickened,which make the propeller is not easily broken. The smooth surface design on the prop decreased the windage resistance,increasing the efficiency of the propeller.

Foxeer Arrow Mini FPV Camera

The Foxeer Arrow Mini FPV Camera comes with excellent WDR, which works well in the fast change of the dark and bright environment, support 5-35V super wide voltage, and built-in microphone and FPV OSD.The angle of the camera is adjustable on the ARRIS X220.

ARRIS VT5804 Switchable VTX

ARRIS VT5804 48CH 0mw/25mw/100mw/200mw/400mw/600mw Switchable Video Transmitter.It has stable output power, long transmission range (0.5KM+@25mW; 1KM@200mW; 2KM+@600mW with stock antenna), 6 power switchable,Output power and frequency setting can be done in OSD interface through remote controller and it weighs only 6g, perfect for fpv racing quads.

Foxeer Pagoda Pro 5.8G Antenna

The body adopts imported PC+ABS material, can withstand high strenghth impact. Double-jacket semi-rigid cable for heavy impact resistance. Lower feeder loss, easy to install, can be bent at any angle and maintain.

Product description

ARRIS X220 V2 220mm FPV racing drone RTF is fully assembled and tuned, it is ready to fly. It is one of the best racing quad for free styling. ARRIS X220 RTF comes with ARRIS X2205 2300kv high quality brushless motor, Flycolor Raptor S-Tower BHeli-S 2-4S 4-in-1 30A ESC + F4 + PDB + OSD board, Dalprop T5045C high efficiency propeller, Foxeer ARROW Mini pro fpv camera,5.8G 48CH long range mini video TX, radio with receiver and 4S 1500mah 50C lipo battery. Before leaving the factory, the RTF is tuned and tested by the technician.

Specifications:

Diagonal Wheelbase: 220mm

Flight Controller: F4 flight Controller

Frame Material: Pure Carbon Fiber

BNF weight:329.5g

Radio System: QX7 radio

Camera: Foxeer ARROW Mini Pro FPV camera

FPV TX: 5.8G 48CH switchable VTX

Antenna: Foxeer Pagoda Pro antenna

Flying Time: About 12 minutes (hovering)

Battery: ARRIS 4S 1500mah 50C Lipo

Package Include:

1 x ARRIS X220 FPV Racing Quad Frame (ASIN: B071RC5LQ7)

4 x ARRIS X2205 2300KV V2 Brushless Motors (2CW+2CCW) (ASIN: B07C744598)

1 x Flycolor Raptor S-Tower BHeli-S 2-4S 4-in-1 30A ESC + F4 + PDB + OSD

4 x Dalprop T5045C High Efficiency Propeller

1 x Foxeer ARROW Mini Pro camera

1 x ARRIS VT5804 48CH VTX (ASIN: B07BM24JLB)

1 x Foxeer Pagoda pro mini antenna (ASIN: B07C91QVM2)

1 x Radio with XSR receiver

1 x ARRIS Buzzer

1 x ARRIS 4S 1500mah Lipo Battery (ASIN: B01I37E3BS)

2 x Battery straps

Note: Battery Charger is sold separately.

• This is an assembled RTF version, with Q X7 radio set and high quality 4S lipo battery. Each drone has been well-calibrated and pre-flied.
• The main feature of the ARRIS X220 is the "X" symmetrical design,light weight,simple structure,durable and agile.The ARRIS X220 comes with the chamfered edge design on the arm, which gives the quad a sleek look.It comes with 4mm pure carbon fiber plate arm, make the frame super strong.The ARRIS X220 is made of pure carbon fiber with alloy pats, the weight is quite light.The structure of the X220 is simple, it is easy to maintain.
• Flycolor Raptor S-Tower comes with BLHei-S 4-in-1 30A ESC and F4,PDB and OSD. The ESC comes with EFM8BB21F16G MCU, support Dshot / Multishot / Oneshot,support high KV motor, can support at most 500k eRPM.Dshot is digital signal, anti-interference ability is stronger, and do not need throttle calibration.
• ARRIS X2205 V2 2300KV brsushless motor is high end brushless motor specially designed for high performance fpv racing drones.It adopts brand new M5 steel shaft, improving the structure strength. It had been upgraded to centrifugal fan design, optimizing the heat dissipation.It also adopts original Japan NSK bearing and N52 tile-shape magnets to ensure the power and quality of the motor.
• ARRIS X220 has integrated with a remote controller battery warning buzzer, pilot can set the threshold (adjustable)according to betaflight parameter-adjustment software. In addition, you can also locate your racing drone through triggering the buzzer with the switch SC on the transmitter.

User questions & answers

Question:	What type of batteries do the transmitter use
Answer:	Please use 7.4V, size 74*44*14mm battery. The plug specification of thetransmitter is 2S balanced head
Question:	What is the controller mode? (left or right hand throttle
Answer:	it is left hand throttle.
Question:	do u have to pair this drone with transmitter an does it have a battery charger
Answer:	Dear Sir, Thanks for your inquiry. This drone does not include battery charger. You need to have to buy a charger separately. And you don`t need to pair it to transmitter anymore, because our technician had done this before shipped out. If you have any other concern, please feel free to contact us.
Question:	What is the little white plug hanging off the front of the quad? It came with a little board with 5 buttons, but no instructions, anyone
Answer:	That is your ODS board for setting up the camera.

Product description

Specification:

Diagonal Wheelbase: 220mm

Frame Material: Carbon Fiber

Weight of the Frame: 96.4g

Features:

ARRIS X220 is one "X" symmetrical design, with the 220mm wheelbase fpv racing drone, it is compatible with 5" propellers.

The ARRIS X220 comes with the chamfered edge design on the arm, which gives the quad a sleed look.

The ARRIS X220 comes with 4mm pure carbon fiber plate arm, make the frame super strong.

The ARRIS X220 is made of pure carbon fiber with alloy pats, the weight is quite light.

The structure of the X220 is quite simple, but it has high power compacity.

The battery can installed on top of the quad or below.

With optinal seat, you can mount the Gopro or other sports camera on top of the frame



Package Included:

ARRIS X220 220mm FPV Racing Drone Frame x 1

• The ARRIS X220 is made of pure carbon fiber material, which has very strong strength.
• "X" symmetrical design is the most popular structure in the market at this time.
• Simple structure makes it is very easy to be repaired after a crash.
• There are 2 methods to install the battery. Also customers can install gopro or other sport camera on the top of the frame.
• The structure of the X220 is quite simple, but it has high power compacity.

User questions & answers

Question:	How thick are the arms in milimeters
Answer:	It is 4mm.

Product description

The Explorer 280 drone's settings software is INAV not Betaflight.The INAVversion is 2.0.0,and firmware name is OMNIBUSF4 and firmware verison is 2.1.0.

ARRIS Explorer280 aims at long range and long flight time for drone fpv lovers, to explore the funny things through this drone.. It is compatible with GoPro and sports camera on top. With the GPS, it can realize the height fixed, one key return to home function. With 600w stock video transmitter, the transmission range can reach to 2km.

Package Included:

ARRIS Explorer280 280MM Fpv racing drone frame x 1

ARRIS X2206 1500KV Brushless motor x 4

ARRIS BLHeli_S 30A ESC x 4

Gemfan 7042 Propeller x 4

F4 V3 Pro flight controller x 1

BN-880 Flight Control GPS Module x1

ARRIS VT5804 Switchable video transmitter x 1

Foxeer Pagoda pro antenna x 1

Note: Radio, Receiver and battery are not included.

• ARRIS Explorer280 long range drone comes with X280 frame, arris x2206 1500kv high efficiency motor, 3-4S simo BLHeli_S ESC, Gemfan 7045 two blade propeller,popular arris fpv camera, ARRIS VT5804V2 power switchable long range Video transmitter, Foxeer pagoda pro antenna. It is fully assembled and tested,install the receiver which is compatible with your radio, do some settings, it will fly.
• Gemfan Flash 7042 7 Inches 2 Blade Propeller..With light blade and less moment of inertia, Gemfan flash series propellers have smooth turning performance and fast response.The polycarbonate material is dash-and-bending-resistant and leads to the best efficiency and durability.
• ARRIS 30A 2-4S BLHeli_S brushless esc is specially designed for fpv racing drones. It support oneshot, multishot and dshot300 protocals. Fast response to the throttle during the flight.
• Omnibus F4 PRO V3 flight controller adopts STM32F405 MCU,which increase teh operation frequency, faster response than F3. it comes with built in OSD and barometer, you can adjust the OSD in BF software, more convenient.
• ARRIS FPV Camera has compact size, vivid color ultra-low latency, as well as excellent performance under complicated conditions（great changes in brightness） due to good WDR. This FPV camera greatly improve the playability of racing drone.

User questions & answers

Question:	What type of contoroller neede
Answer:	Radiolink works well with this product
Question:	What button woild you push on an at9s controller for the GPS return home function to work
Answer:	On the right hand side of transmitter would be the far-right switch one facing you not on top but the one facing you

Product description

ARRIS C250 V2 250mm FPV racing quadcopter adopts special tranfer printing technology on the basis of C250. The paintings are printed on the pure carbon frame.They are not easily falling off the carbon fiber.The main feature of this frame is low gravity center, durable and agile. It suitable for both beginners and experts.

ARRIS C250 V2 is made of pure carbon fiber material. The upper plate and side plate adopts 1.5mm pure carbon fiber material, decrease the weight of the whole frame. Meanwhile, the motor arm adopts 4mm carbon fiber material, ensure the strength of the frame. The total weight of the frame is about 137g.With the simplify one-piece design and lower gravity center design, all kinds of flight actions can be done with facility.

The layout design of the C250 V2 is reasonable, the standard flight controller and PDB board can install there.On the frame, there is reserved space for the XT60 female battery connector.The motor arm has holes for 220x series motors, and both 5 inches and 6 inches propellers can install on the C250 V2 frame.

ARRIS C250 also comes with the 3M foam damper which has good vibration-suppressing effect during the landing.

Specifications:

Item Name: ARRIS C250 V2 Frame

Diagonal Wheelbase: 250mm 

Frame Material: Pure Carbon Fiber 

Weight: 142g

Suitable Propeller: 5",6"



Pacakge Includes:

1 x ARRIS C250 V2 250MM FPV racing quadcopter frame

4 x 3M Foam Damper

• Camouflage color, makes your drone become outstanding while flying.
• Made of high quality carbon fiber,designed to sustain crash.
• Plenty of space to easily fit your FPV and reduce the wring messing.
• Weights only 142g.
• Suitable for both beginners and experts.

User questions & answers

Question:	Will this work eith 2204 motors
Answer:	yes, it can work with 2204 brushless motors.
Question:	Will a emax magnum f4 fit
Answer:	The emax stack will not fit you can put an all in one with esc's on the arms

Product description

ARRIS C250 250mm FPV racing quadcopter is the latest ARRIS 250 series racer. The main feature of this frame is light weight,low gravity center, durable and agile. It suitable for both beginners and experts.

ARRIS C250 is made of pure carbon fiber material. The upper plate and side plate adopts 1.5mm pure carbon fiber material, decrease the weight of the whole frame. Meanwhile, the motor arm adopts 4mm carbon fiber material, ensure the strength of the frame. The total weight of the frame is about 137g.With the simplify one-piece design and lower gravity center design, all kinds of flight actions can be done with facility.

The layout design of the C250 is reasonable, the standard flight controller and PDB board can install there.On the frame, there is reserved space for the XT60 female battery connector.The motor arm has holes for 220x series motors, and both 5 inches and 6 inches propellers can install on the C250 frame.

With the adjustable camera mount on the frame, you can adjust the angle of the camera freely.

ARRIS C250 also comes with the 3M foam damper which has good vibration-suppressing effect during the landing.

Pacakge Included:

1 x ARRIS C250 250MM FPV racing quadcopter frame

4 x 3M Foam Damper

• The total weight of the frame is about 137g.
• The main feature of this frame is light weight,low gravity center, durable and agile. It suitable for both beginners and experts.
• ARRIS C250 is made of pure carbon fiber material.
• ARRIS C250 also comes with the 3M foam damper which has good vibration-suppressing effect during the landing.
• With the adjustable camera mount on the frame, you can adjust the angle of the camera freely.

User questions & answers

Question:	Does this frame supports Holybro tekko 4in
Answer:	It can't support if your Holybro tekko 4in1 comes with a 5.8G 40CH VTX, and we'd like to suggest you another proper one, and you can search it with the link, https://www.amazon.com/dp/B071RC5LQ7
Question:	Time fly
Answer:	Depends on battery. I use 3s 2200mah 25c. Moderate flying. 7min+/-. Need higher C rated batteries.
Question:	Where does everything wilder into? I don’t see a power distribution board. Thanks
Answer:	no pdb. just bat connector with mini board to tie into pdb