13 best rc tires

Product description

Description:

- 4 Pieces 17mm Hub Wheel Rim&Tires 1:8 Off-road RC Car Buggy Tyre.

- High quality and brand new.

- Material: Rubber

- Color: Black

Specification:

- Wheel Hub: 17mm

Size Chart:

Diameter: Approx. 112mm/4.41inch

Width: Approx. 43mm/1.69inch

Package Includes:

4 Pieces 1/8 Scale RC Tires

Note:

Due to the difference between different monitors, the picture may not reflect the actual color of the item.

Due to manual measurement, there may be 1-2mm error in size.

• High quality and brand new.
• Color: Black
• 4 Pieces 17mm Hub Wheel Rim&Tires 1:8 Off-road RC Car Buggy Tyre.
• Material: Rubber

Product description

Duratrax SpeedTreads Speedhawk Tires Mounted : 1/10 Stadium/Monster Truck, DTXC2900

User questions & answers

Question:	Will these fit the arrma granite blx
Answer:	Haven't tried it, but if granite has 12mm or 14mm hex wheel hubs, they should fit.
Question:	Are these wheels rated for 3s lipo speed stampede vxl
Answer:	I am currently using them on a vxl rally and they are doing pretty good.
Question:	Would it fit a rustler
Answer:	These wheels will fit 12mm or14mm hex hubs. Looks like Rustler's stock hubs are only 10mm in diameter. (Correct me if I'm wrong).
Question:	Willie's tires go above 70 miles an hour and not blow out
Answer:	I have had them up to 69 and no issues.

Product description

1/10 RC Monster truck tires with foam inserts: C2 soft, mounted, 6-spoke front/rear wheels

• Six pack tread pattern offers superior off-road performance on loose (dry and loamy), hard packed (dry), pavement or grass track conditions
• 2.8 MT tires with foam inserts Pre-mounted on Black 6-spoke plastic Rims
• Tire outer diameter: 4.7 inch; tire width: 2.6 inch; wheel diameter: 2.8 inch; drive hex: 12mm; offset: 1/2 inch
• Fits front: Traxxas ep Stampede 2WD, Traxxas ep Rustler 2WD, Axial ep Monster Jam 2WD, Traxxas ep Stampede 4WD and HPI savage xs Flux
• Fits rear: Traxxas GP Jato 2WD, Traxxas GP Stampede 2WD, Traxxas GP Rustler 2WD, Traxxas ep Stampede 4WD and HPI savage xs Flux

User questions & answers

Question:	are these tires belted
Answer:	No —they are foam filled
Question:	So if i have the electric rustler vxl which wheels and tires do i need because i ordered the wrong ones last time ...they were for nitro not electric
Answer:	You need to buy the rear duratrax 2.8. The rear are 12mm hex like the traxxas.
Question:	Will the 1/2" offset be appropriate for arrma granite blx 3s
Answer:	I bought the 1/2 offset six pack once before and it was not 12mm hex. If the arrma is 12mm hex from my experince you shld buy the mounted rear and they will not be offset. Arrma dboots are another way to go but i dont know how good arrma tires are. Or proline if money is not a problem but my last proline tires were wobbly so i got the duratrax hatchet instead.
Question:	Do these wheels fit on the rear of a Traxxas Rustler
Answer:	Those are rather large. It’ll fit but they’re huge.

• It suitable for RC 1/10 climbing car, off-road vehicle and so on; The tire and wheel rim are separated, so you need to glue them together by yourself.
• Material: Plastic + Rubber
• Outer Diameter: 95mm/3.74"
• Wheel Diameter: 52 mm /2.05"
• Wheel Drive Hex: 12 mm/0.47"

User questions & answers

Question:	Will these fit front and rear on a Traxxas jato 3.3 since the front has round spindles instead of drive flanges
Answer:	I per a only would not buy them. They wound up breaking after 10 seconds
Question:	Can this be used on a traxxas raptor
Answer:	They should fit perfect
Question:	what is the wheel size on these? 1.9 or
Answer:	They are 1.9" tires and wheels.
Question:	Would they work on a redcat sandstorm
Answer:	They would fit. But seem small and narrow for 1/10 scales.

Product features

JIUWU Buggy Rubber Tires + 5 Spoke Wheel Rim for RC HSP 1/10 Off-Road Pack of 4

Note:

1. Please check the size caefully before buying it.

2. You need to screw tightly when intall the wheel to the model toy. The huge impact will make the drive hex broken easily when the toy car run fast.

100% New and Never Used.

It suitable for RC 1: 10 climbing car, off-road vehicle and so on.

Note:The tire and wheel rim are separated, so you need to glue them together by yourself.

Product description

Bullet Points:

1100% brand new and high quality.

It's suitable for 1/8 RC Buggy Off Road, with foam inserts

re-Mounted & Pre-Glue Just Bolt On & Go!

imensions: Diameter/Height: 120mm Width: 42mm Wheel Hex: 17mm

for 1/8 Off-Road RC Car Buggy Redcat Team Losi VRX HPI Kyosho HSP Carson Hobao



Feature:

100% brand new and high quality.

It's suitable for 1/8 RC Buggy Off Road, with foam inserts

Pre-Mounted & Pre-Glue Just Bolt On & Go!

Dimensions: Diameter/Height: 120mm Width: 42mm Wheel Hex: 17mm

for 1/8 Off-Road RC Car Buggy Redcat Team Losi VRX HPI Kyosho HSP Carson Hobao



Specification:

Material: Rubber/Plastic

Tire outer diameter: 120mm

Tire inner diameter: 80mm



Diameter: 90mm

Wide: 42mm

Hex: 17mm

Item weight:130g/PCS

 



Package Including

2 * RC Tries

• Product parameters: diameter 120MM, width: 42MM, hexagonal coupling 17MM.
• High Crush-resistant.
• Using rubber tire skin and sponge filler, high quality.
• High Wear-resistant.
• Suit for 1/8 1:8 Off-Road RC Car Buggy Redcat Team Losi VRX HPI Kyosho HSP Carson Hobao.

User questions & answers

Question:	Is 4 pieces right
Answer:	yes, 4 pieces.
Question:	Does it fit Traxxas slash 4x
Answer:	You need a 12mm to 17mm hex adapter.
Question:	Will these work on a erevo
Answer:	Hi sorry to tell you that it can't be work for your erevo 2.0 car.It ONLY fit the 1/8 scale rc car.
Question:	how many tires are included? the top says 4 pieces
Answer:	Is this 4 pieces

Product description

Features: 1.Tire Diameter: 110mm,Tire Width: 45mm. 2. Wheel Rim Drive Hex:12mm. 3. It is durable and waterproof, grip grain tires. 4.Made of high-quality material for a good grip on all types of terrain. 5.Suitable for Traxxas Slash HPI VKAR Redcat HSP LRP Description: 1. This is a high quality 1/10 RC car rubber tires. 2.Exceptional quality and performance. Specifications: Color: Black Tyre Diameter: 108mm Tyre Width:45mm Wheel Rim Diameter: 45mm Wheel Rim Drive Hex: 12mm Tire Material: Rubber Inner tank Material: Sponge Suit for: 1/10 Short Course RC Car Package information: Package size: 215x215x45mm Package Weight: 450g Package included: 4 x Tires

• 🔥🔥🔥RC Wheels and Tires Size: The size of our 1/10 RC Short Course Truck Tires, Inner Diameter: 1.77" (45mm) | Outer Diameter: 4.25" (108 mm) | Width: 1.77" (45mm) | Hex Size: 12mm. "Please make sure our RC tires and wheels are the correct sizes you are looking for, to avoid the returns products and save your time due to the inconsistent size."
• 🔥🔥🔥 Product use precautions：This 1/10 Scale RC Wheels and Tires with 12mm hex, it designed for almost all 1/10 Scale RC short course truck car with 12mm hex, like for Traxxas Slash HSP Tamiya HPI Kyosho VKAR Redcat LRP RC car, etc.
• 🔥🔥🔥 High-Quality Material: This is an Assembled 1/10 Scale RC Short Course Truck Tires with foam inserts, ready to use. The material of these tires are taking high-quality soft rubber, and the wheels are made of high-quality plastic. That has increased the tires and wheels durability, wear-resistant, practicality.
• 🔥🔥🔥 Easy to install: Easy to replace, small size, easy to disassemble and install, more convenient to use. Due to the special design surface texture, non-slipes, and stronger resistance.
• 🔥🔥🔥 Customer Services: Please feel free to get in touch with us if you have any question which related to our products, our team willing to help you to solve the problems that you have meets.

User questions & answers

Question:	Are these pre glued
Answer:	Yep
Question:	Will they fit the traxxas rustler 2wd
Answer:	I have a 2wd slash. Fit perfectly.
Question:	Will these fit a Slash 4x
Answer:	Yes

Product description

Important Note:

1.The tires and wheel rims are separated, you need to assemble and glue them together by yourself.

2.Note:Do not fit Rally / Off Road Truck / Truggy / Buggy

3.Compatible with Traxxas Redcat Hpi Tamiya Associated HSP ExceedRC 1/10 RC on-road Racing car,touring car.

4.Also work on Traxxas 1/16 E-Revo



Features:

Tire Outside diameter: 65mm

Inner diameter: 45mm

Hexagon coupling: 12mm

Tires wide: 26mm



Material:

Tire:Soft Rubber

Wheels:Plastic

With foam in the tire

Color:Black + Red

Weight: 120g/Set



Package includes:

4 x Wheel Rims and Tires

• Note: The tires and wheel rims are separated, you need to assemble and glue them together by yourself.
• Compatible with RC 1/10 on-road Racing car,touring car,for example,Compatible with Traxxas,Redcat Hpi, Tamiya, Associated, HSP,Exceed 1/10 RC on-road Racing car,touring car.
• Tire Outside diameter: 65mm,Tire Inner diameter: 45mm;Width:26mm
• Material of Tire:Soft Rubber;Material of Wheels:Plastic;With sponge inside.
• Hexagon coupling: 12mm (Not Included)

Product description

high quality 1/10 short course truck tires are suitable for any road conditions.

With its terrific quality and performance, it can satisfy the needs of the racers.

So come and take it home, excellent choice will let you enjoy more fun.

Specifications:

Brand: Austar

Item name: 1/10 Short Course Truck Tires with Wheel Rim

Model: AX-3009

Wheel rim material: Plastic

Wheel rim outer diameter: 60mm

Hexagon adapter: 12mm

Tire material: Rubber

Tire outer diameter: 108mm

Tire width: 46mm

Suitable for: 1/10 short truck RC car

Quantity: 4Pcs

Item weight: 119.7g/pcs

Package information:

Package size: 25 * 21.5 * 5cm / 9.9 * 8.5 * 2.0in

Package weight: 498g / 1.1lb

Polybag package

Package list:

4 * AX-3009 1/10 Short Course Truck Tires with Wheel Rim

• The Rc Tires100% brand new,High Wear-resistant, High Crush-resistant.
• The Rc Tires is Easy to install. There is no need to stick.
• Fine workmanship and perfect style, The tire and wheel can be dissembled separately.
• Made of high quality rubber and durable in use,High performance meet the challenges of any road conditions
• Suitable for Traxxas 1/10 Short Course Truck Scale Rock Crawler Hsp Redcat RC4wd Tamiya Axial SCX10 D90 Hpi Traxxas RC Car

User questions & answers

Question:	Will these fit a traxxis vxl ruslter
Answer:	Dear customer Not compatible have a good day
Question:	Would these fit my red cat raceing volcano RC truck
Answer:	Dear customer Compatible, but 12mm smaller than your original tire diameter

Product description

Note:The color of the item may vary slightly due to photography and your own computer /Phone

Please allow some little manual measurement error.

Customer Satisfaction Guarantee

If you are not 100% completely satisfied with our products, please do not hesitate to contact us to request a refund or exchange!



Note:Check your specific model's manual for compatibility,or Contact us.

• ✔Note:The tires NOT Glued on rims,mounted on rims ONLY. Tires made of Quality Rubber,With Foam Insert,High wear-resistant and excellent durability
• ✔Compatible with:Mostly Brands 1:10 Scale Off-Road Car,Monster Truck,Such as Redcat Volcano Epx /Pro,Volcano S30,Traxxas Stampede 1/10 2WD,Exceed RC Infinitive,ZD Thunder, HPI,HSP, etc.
• ✔Tire Material:Rubber; Wheel Rim Material : Quality Nylon Plastic (Standard Foam Inserts)
• ✔Tires OD 4.92" (125mm); ID 2.76" (70mm);Width:2.56" (65mm) Wheel Hub:12mm;Diameter of the Axle Hole :4mm
• ✔100% New,Genuine HobbyPark RC Products,Exquisite workmanship & Durable

User questions & answers

Question:	Will it fit traxxas rustler 2wd
Answer:	They should. I'm using them in an ecx circuit 2wd that has traxxas axles. Same 12mm hex hub. Only different is the hole for the axle stud. Might have to open it up a touch depending on your axle.
Question:	Will the tires fit a trxxax jato 3.3? do all tires have the 12 mm hub? your advertising they fit a 2wd, ant the front wheels do not have the 12mm
Answer:	They will not fit jato 3.3 front bc, jato 3.3 use wheel bearings in the front
Question:	What kind of glue should I use on this product
Answer:	Any R/C tire glue should be fine.
Question:	can these handle 6s on a modded 1/10 slash 4x4? I'm guessing they will explode instantly
Answer:	3S will spin the center just about out, I’d say no 6S should be used. They are nice tires, durable but not built for that kind of speed

Product description

Note: The color of the item may vary slightly due to photography and your own computer.



Feature:

1. Four pieces of tyres, made of rubber, perfect replacement for your kit.

2. These tyres fit normal RC 1:10 on-road racing car. Easy to install, you can get the perfect combination of looks and performance on your model kit.

3. Genuine quality spare part for easy maintenance and repairs.



Specification:

Suitable For RC 1:10 on-road racing car

Material: Rubber

Color: Black

OD: 65mm/2.56 inch

ID: 52mm/2.05 inch

Width: 26mm/1.02 inch

Weight: 82g



Pacakge Include:

4 x RC Tyres

• Made of rubber, perfect replacement for your kit, and easy to install.
• Suitable for RC 1:10 On Road Racing Car.
• OD: 65mm/2.56 inch
• ID: 52mm/2.05 inch
• Width: 26mm/1.02 inch

User questions & answers

Question:	would these tires work on Kyosho Fazer series? Kyosho Chevelle
Answer:	I installed these tires on RPM N2O Resto-Mod 26mm Sedan Wheels (PN: 8155) and they were a great fit. So far so good. The compound is somewhat soft so they do wear, but overall a solid value. The RPM wheels are designed with the proper offset (offered in black or chrome) for the Fazer Mk2. I give it a thumbs up.
Question:	Are foam inserts included with the tires
Answer:	Yes it comes with the foam inserts.
Question:	What is the inside diameter? (The diameter of the hole
Answer:	I’m sorry. It was given as a gift so i don’t have it any longer.
Question:	Will these tires fit traxxas 4tec stock wheels
Answer:	I put them on the stock wheels from a traxxas 4tec from about 1996, and they fit ok. They're a little too wide, which makes it hard to get the surface flat, but they're definitely the right diameter.

Product description

Please click the ''Miuezuth'' to contact us if you don't know will this tires and wheels fit on your RC truck.



Features

Color: Black

Wheel rim material: ABS

Material: rubber tyre

Quantity: 4 pcs

Item weight:110g/piece

Fit on Traxxas, Tamiya plasma eedge 2 and other 1:10 short course rc truck.



Specifications:

Wheel rim diameter: 47mm

Tire outside diameter: 110mm

The width of the tire. 46mm

Nut Fixed Hole: 5mm

Hex Diameter: 12mm



Package information:

Package size:23* 23 * 6 cm

Package weight: 458g



Packing List:

4 X AX-4006 Short Truck Tire.



Customer Service

3 Years Warranty Time and Life Limited Friendly Customer Service.



Note: there's some little error from human measuring.



More options for you:

1.9" 110mm Crawler Tires: B07PLLKHCT

2.2" 130mm Rubber Tires: B07PHFX8BH

1.9" 120mm Crawler Tires: B07PLJCD1W

• NOTE: If you have any problem please contact us feel free before nagative feedback or return, we provide technical support and satisfied customer service for you. Thanks! Fit on Traxxas, Tamiya plasma eedge 2 and other 1:10 short course rc truck. These tyres are made of super soft compound for a good grip on all types of terrain.
• Tire outside diameter: 110mm. Designed for 1 / 10 Off-road Truck Crawler Racing RC Car Model. Excellent workmanship and perfect style.
• Update solid wheel rim has made more durable.
• Increase the wheel tire greater stability. You need to glue them before use it.
• Packing List: 4 X AX-4006 Short Truck Wheel Tires. 3 Years Warranty Time and Life Limited Friendly Customer Service. Any Question, please click “Miuezuth” to contact us. Thank you.

User questions & answers

Question:	Will this fit a 1/16 slash
Answer:	If a 1/10 slash tire fits this will... They are slightly bigger than the stock 1/10 slash tires
Question:	Well these fit a losi baja rey ford raptor
Answer:	Yes just remove the front two calipers so t the ey dont rub
Question:	so these are bf goodrich tires ? as in pic
Answer:	Fantastic tire non the less.
Question:	Lol took my question off? what couldn't answer it? do they fit a losi baja rey
Answer:	Yes they do fit losi baja rey. I just actually checked to see. The front brake caliper rub on inside of rim on the front two wheels. I removed caliper and wheels fit great. They look good on my losi baja rey. Hope this helped

Product description

Designed for asphalt, concrete, hard and smooth surfaces, the Duratrax Bandito ST tires are ideal for high traction condtions. The C2 (soft) compound is comparible to Pro-Line M3 and AKA soft ratings. For the rear of the 2WD Traxxas Stampede, Rustler, and Monster Jam. Features white sidewall markings and one piece foam inserts.

• Wheel Diamter: 2.8 in (71 mm)
• Width: 1.9 in (49 mm)
• Hex Size: 12 mm

• Designed for asphalt, concrete, hard and smooth surfaces
• Ideal for high traction condtions
• For the rear of the 2WD Traxxas Stampede, Rustler, and Monster Jam
• C2 (soft) compound is comparible to Pro-Line M3 and AKA soft ratings
• Includes two each of Bandito ST 2.8 C2 tires, foam inserts and black wheels

User questions & answers

Question:	Will these fit my reacat blacout xte pro
Answer:	If it's 12mm hex
Question:	Can this fit a 1/16 erevo
Answer:	That depends on your wheel hex adapter size! These wheels are 12mm
Question:	Is this glued
Answer:	No, they're beadlocks.
Question:	Are these good for high speed runs
Answer:	They are good for high speeds if your running 2s lipo batteries I wouldn't go anything higher then 2s. The are very grippy and hold up very well. Highly recommend

Product description

Item: 1/10 Scale On-Road Tires & Wheel Rim

Package Include:

4x Tires & Wheels Rim Complete

​​4x Nylon Lock Nut M4

(Note: The tire is not glued on rim. It's mounted on rim with foam inserted)



Features:

Tire Material: Soft Rubber;

Wheel Rim Material : Plastic

Tires Outside Diameter: 2.48''(63mm)

Width: 1.02'' (26mm)



Drive Hex: 12mm (Not Included)

Wheel Rim Diameter:2.05"(52mm)

Wheel Rim Axle hole: 4mm

Standard Tire Sponge inserts Included



Tires and Wheel Not Glued, can be split



Compatibile with: 1/10 Scale On-Road Model Cars, such as HSP HPI Redcat,Himoto,Tamiya ,Exceed,AMAX and so on.Check the size in the features.



Note: Tires and Wheel Not Glued, can be split.Check your specific model's manual for compatibility,or Contact us.

• Note: The tire is not glued on rim. It's mounted on rim with foam inserted
• Compatible with: 1/10th Scale 12mm Hex On Road RC Car
• Tire Material:Rubber; Wheel Rim Material : Plastic
• Tires Outside Diameter: 2.48''(63mm) Width: 1.02'' (26mm)
• Drive Hub: 12mm (Not Included)

User questions & answers

Question:	Could you paint the rims
Answer:	Yes
Question:	Will they fit the redcat tornado
Answer:	Might be little small, I got them for a team associated ntc3 and the original were a bit bigger? I hope that’s a bit helpful.
Question:	Can the tires come off the rims
Answer:	The tires are very well secured to the rims from the manufacturer. I have had no issues
Question:	Will these work with 3s lipo and speeds around 45 mph
Answer:	Not sure but my rc tops out at 33mph and has no problems. My rc had drift tires and I also wanted some grip these are great. Fast and grippy for great control