11 best plugs for rc cars
Plugs for RC cars are a crucial component of the remote-controlled (RC) hobby, specifically in powering and connecting the batteries and electronics of these vehicles. RC cars come in various sizes and types, each with its own set of connectors and plugs. Here's what you need to know about plugs for RC cars:
Battery Connectors: RC cars typically use specific connectors for their batteries. Two of the most common types are:
Tamiya Connector: The Tamiya connector is a common choice for entry-level and older RC models. It's a simple plug with a positive and a negative lead, making it easy to connect and disconnect.However, it has limited power-handling capabilities and may not be suitable for high-performance RC vehicles.
Deans Connector: Deans connectors, also known as T-plugs, are popular in the RC community for their low resistance and ability to handle higher currents. They are often used in more powerful RC cars and are considered more reliable than Tamiya connectors.
Bullet Connectors: Bullet connectors are another option for connecting RC car batteries and electronics. They consist of cylindrical plugs with male and female ends, making them suitable for high-current applications. Bullet connectors come in different sizes to match the power requirements of the RC vehicle.
XT60 and XT90 Connectors: XT60 and XT90 connectors are becoming increasingly popular in the RC community due to their higher current-handling capacity and improved durability. XT60 connectors are suitable for smaller to mid-sized RC cars, while XT90 connectors are used for larger and more powerful models.
Balance Connectors: In addition to the main power connectors, RC car batteries often have balance connectors. These connectors are used to monitor and balance the individual cells within the battery pack, ensuring safe charging and extended battery life. Common balance connector types include JST-XH and JST-EH.
Connector Compatibility: It's essential to ensure that the connectors on your RC car's battery match those on the electronic speed controller (ESC) and motor. Mismatched connectors can lead to power loss, overheating, or even damage to your equipment.
Upgrading Connectors: If you want to upgrade the connectors on your RC car to improve performance or reliability, you can replace the existing connectors with ones that better suit your needs. However, this may require soldering skills and the proper tools.
Connector Safety: Always take safety precautions when working with connectors and batteries for RC cars. Ensure that connectors are securely plugged in to prevent intermittent power loss, and be cautious when handling LiPo (Lithium-Polymer) batteries, as they can be sensitive to mishandling.
In summary, plugs and connectors for RC cars play a crucial role in powering and connecting the various components of these vehicles. Choosing the right connectors based on your RC car's size, power requirements, and specific needs is essential for optimal performance and safety in the world of remote-controlled vehicles.
Below you can find our editor's choice of the best plugs for rc cars on the market- The Gens ace 2S 7.4v lipo battery 5000mah with 50C discharge rate hardcase offers you very high power and very long run time for your RC cars. The 100C max burst rate gives you enough power for acceleration. It enhances your driving experience no matter what type of driving you are into.
- Quickly Recharged: 1C-5C fast charge capable,1C suggested; long cycle life (150 times minimum), up to 200Wh/kg energy density
- Parameter: Weight, 304g, dimension - 138L x 47Wx 25H mm, connector: Deans plug
- Applications: specially designed for 1/8 and 1/10 rc car, Arrma, Losi, Slash, HPI Strada XB 1/10 RTR Electric Buggy, Team Associated, Axial, Tamiya, Duratrax, Jammin, Redcat Racing, Exceed RC, Electrix RC, Emaxx, Kyosho GP 4WD Racing Truck
- The Gens ace battery comes with 24 hours' friendly customer service. Please feel free to contact us if you have any questions.
User questions & answers
Question: | I only used this battery a couple times , and now my prophet sport li-po charger reports "no battery" when i connect it. can it be solved |
Answer: | Yes |
Question: | How long and wide is it |
Answer: | Yes, the strap is adjustable and can be comfortably worn as a cross body when the length is changed accordingly. |
Question: | what does the hard case #21 mean |
Answer: | I believe it would. I have in mine the following: Nikon Z6 with 24x70 lens attached, sb900 and sb400 flashes, 70x300 Nikon lens, 85 mm Nikon lens, Nikon fisheye, Nikon 24x120 lens and the adapter for older lens. |
Question: | will it work with the traxxas slash1/10 scale i know you will need an adapter but will it have enough power |
Answer: | The Tamrac website lists these dimensions, and you can measure your gear to see if it fits: External Dimensions - 47 x 23 x 26 cm (18.5 x 9 x 10 in)Internal Dimensions - 39 x 21 x 20 cm (15 x 8.25 x 8 in) |
Product features
GENS ACE THE ULTIMATE POWERFUL PERFORMANCE LIPO BATTERY
Gens ace is one of the top rank battery corporations with deep research and manufacturing on LiPo batteries by the effort of 200 professional engineers and technicians with 20 years exquisite battery technology. With superb pairing techs, safe and steady formula of raw material, smooth and steady discharge curve and rigorous scientific quality control system, Gens ace LiPo Batteries provide the punch and on-demand power for reaching the top speed, acceleration and power your rc models. Experience all the performance that's been engineered into your rc models!
COMPATIBLE RC MODELS
HIGH PERFORMANCE
LIPO BATTERY SAFETY FIRST
Initial Performance Tests
Production in the most strict single cell capacity, voltage, resistance, discharge curve matching process. Superior Japan and Korea Lithium Polymer raw materials.
- 【High Performance】- High capacity, Long Cycle Life (150 times at least), up to 235Wh/kg energy density. More run time, more fun time.
- 【Specification】- Cells Number: 2; Voltage: 7.4V; Capacity: 5000mAh; Discharge: 60C; Cell voltage: 3.2~4.2V; Discharge plug: Tr and Deans Connector.
- 【Parameter】- 2S Lipo Battery Dimension(±2mm): 139*47*25mm / 5.47*1.85*0.98inch (L*W*H); Approx Weight: 264g / 9.31oz.
- 【Application】- Suitable for models Like Align T-REX 250, Blade 200 SR X, 230s, Specially Designed for 200, 250 class heli, 800mm Warbirds, rc car, tuck, etc(Only if the voltage, dimension and the plug match, then it will fit).
- 【Professional and Reliable】 - With the most advanced production technology and strict QC teams, our Lipo batteries provide steady discharge curve, high discharge rate to reach the top speed with the most stability and power your RC hobbies. Please let us know if you have any questions about our product, and we will reply you within 24 hours.
User questions & answers
Question: | Will this fit a latrax Teton and will I need a new charger due to the smaller white plug |
Answer: | These will be too big to fit in the model. |
Question: | If I want to use the deans plug do I have to cut the wires and solder it or can I plug in the adapter and go |
Answer: | Hello, You can buy the Male TRX Traxxas to Female Deans T Connector Adapter, here is the ASIN: B07WGZPVZR Regards |
Question: | Will that's fit in the 1/16 scale E-Revo |
Answer: | Check your battery tray size |
Question: | what are the two red adapters for |
Answer: | For hooking Batts up to space ship |
Product features
Feature:
- Light weight, long cycle life, no "memory-effect".
- High power battery, high capacity provide your rc model more energy, more enjoyment.
- High Discharge rate and steady discharge curve make your rc vehicle work powerfully.
- Premium-grade material from Japan and Korea
Specification:
Chemistry: Lithium Polymer
Cell Number: 2S
Voltage(V): 7.4V
Capacity(mAh): 5000mAh
Discharge Rate (C): 60C
Charge Plug Type: JST-XH
Discharge plug: Tr and Deans Connector
Battery Dimension: 139*47*25mm / 5.47*1.85*0.98inch (L*W*H)
Approx Weight: 264g / 9.31oz
HOOVO 5000mAh 2S Lipo battery Compatible with:
for 1/8 and 1/10 rc car hobby such as: Losi, Tracxas Slash, HPI Strada XB 1/10 RTR Electric Buggy, Team Associated, Axial, Tamiya, Duratrax, Jammin', Redcat Racing, Exceed RC, ElectrixRC, Emaxx, Bandit, Rustler version, Kyosho GP 4WD Racing Truck etc.
Only if the voltage, dimension and the plug match, then it will fit.
Product description
Item: HobbyPark Hot Glow Plug N3 #3
Package Include:2x Hot Glow Plug (1 Washer Per Glow Plug Included)
Features:
-Replace OS #8 Glow Plug
-Platinum/Iridium Supper Glow plug
-Longer Lasting Element
-For 4c Engines
-Improves Idle and transition
-For 5% - 40% Nitro Fuels
HEX Size: 8mm
Application:HSP Himoto Redcat Traxxas Koysho HPI Cars Airplane and so on.
Compatibile with: SHOCKWAVE, TSUNAMI, VOLCANO STX, TORNADO S30, VOLCANO S30, AFTERSHOCK 21, HURRICANE XL, AFTERSHOCK 3.0, AFTERSHOCK 3.5, BACKDRAFT 3.5, CALDERA 3.0, EARTHQUAKE 3.0, EARTHQUAKE 3.5, HURRICANE XP, LANDSLIDE 21, LANDSLIDE LT, MAELSTROM LT, MONSOON XP, SANDSTORM 21, SANDSTORM LT, TWISTER LT, TYPHOON XP, REACTOR RS 3.3, VOLCANO MX, VOLCANO SV, VOLCANO T2, VORTEX SS, TORNADO BB and more.. for club racing and sport use
Note: This is a generic product;Check your specific model's manual for compatibility.
- Platinum/Iridium Super Glow plug Replace OS #8
- Longer Lasting Element, For 4c Engines 5% - 40% Nitro Fuels
- Improves Idle and transition
- Compatible with: tmaxx 3.3 EB-4 thunder tiger stock SHOCKWAVE, TSUNAMI, VOLCANO STX, TORNADO S30, VOLCANO S30, AFTERSHOCK 21, HURRICANE XL, AFTERSHOCK 3.0, AFTERSHOCK 3.5, BACKDRAFT 3.5, CALDERA 3.0, EARTHQUAKE 3.0, EARTHQUAKE 3.5, HURRICANE XP, LANDSLIDE 21, LANDSLIDE LT, MAELSTROM LT, MONSOON XP, SANDSTORM 21, SANDSTORM LT, TWISTER LT, TYPHOON XP, REACTOR RS 3.3, VOLCANO MX, VOLCANO SV, VOLCANO T2, VORTEX SS, TORNADO BB
- Pack of 2,100% New,Genuine HobbyPark RC Products
User questions & answers
Question: | How many volts are these |
Answer: | 1.5 volt |
Question: | Does this work with traxxas rustler |
Answer: | Yes, I actually ordered 2 and put one in my brother-in-laws Traxxas Nitro Rustler. |
Question: | Does this glow plug work with the exceed rc forza buggy |
Answer: | Yes it will they work with any nitro engine they are really good |
Question: | Does this fit a kyosho gxr |
Answer: | Yes |
Product description
Specification:
Item name: N3 Spark Glow Plug For: Nitro Engines Material: Steel Six corners: 8 mm Height: 17.2 mm Quantity: 4pcs Weight: 5g/1PCS The correct use of Hot Glow Plug: 1. After using for a period of time, check whether the Hot Glow Plug heating wire is too white or deformed, and replace it if necessary. 2. After the engine is started, unplug the igniter, the engine speed drops or stalls, eliminate the cause of rich oil, and replace it in time 3. Do not plug the igniter on the Hot Glow Plug for a long time when the engine is working, it will accelerate the aging of the Hot Glow Plug heating wire 4. The engine high temperature knock phenomenon will also make the Hot Glow Plug easy to damage- Hot 70117 Platinum/Iridium Super Spark Glow Plug N3 for RC Nitro Engines Car Truck Buggy
- Platinum/Iridium Super Glow plug Replace OS #3
- Longer Lasting Element, For 4c Engines 5% - 40% Nitro Fuels
- Improves idle and transition , Longer lasting element
- Compatible with:Traxxas tmaxx 3.3 EB-4 thunder tiger stock SHOCKWAVE, TSUNAMI, VOLCANO STX, TORNADO S30, VOLCANO S30, AFTERSHOCK 21, HURRICANE XL, AFTERSHOCK 3.0, AFTERSHOCK 3.5, BACKDRAFT 3.5, CALDERA 3.0, EARTHQUAKE 3.0, EARTHQUAKE 3.5, HURRICANE XP, LANDSLIDE 21, LANDSLIDE LT, MAELSTROM LT, MONSOON XP, SANDSTORM 21, SANDSTORM LT, TWISTER LT, TYPHOON XP, REACTOR RS 3.3, VOLCANO MX, VOLCANO SV, VOLCANO T2, VORTEX SS, TORNADO BB
Product description
USB Charge cable red light is flashing when charging, off after charge full.
Suitable for RC Truck with and 1/20 RC Tank with same voltage and dimensions and Standard Tamiya plug
Battery Specifications:
Voltage: 9.6V
Capacity: 2400mAh (Real about 1500mAh to 1800 mAh capacity)
Connector Type: Standard Tamiya
Dimensions:4.09"x 2.32"x 0.63"
Weight: 7.7 oz
Charge time: 5-10 Hours
Package Contains:
1 x Blomiky 9.6V 2400mAh NiMH Battery Packs w/ Tamiya Connector
1 x USB Charge cable
1 x Blomiky clean wipe
- Battery connector is Standard Tamiya Plug. 9.6V rechargeable NiMH 8 Cell AA battery pack,a high capacity rating of 2000mAh(real about 1500mAh-1800mAh)). fit for Robots and OTC Genisys 239180 & EVO Scan Scanner
- Connector plug cross-section dimensions 0.52*0.28 in/1.34*1.0cm(LxW). 9.6V Ni-Mh Battery Suitable for various applications, the 9.6V RC battery pack will work with most hobby units such as RC monster trucks, olar express trains,ricochet RC trucks, RC beetles, RC Hummers, Traxx Tyco cars, radio shack RC cars,1/20 Tanks
- Battery dimensions:4.09"x 2.32"x 0.63" . The replacement NiMH 9.6V battery pack measures:L* W *H 4.09"* 2.32"*0.63" with built-in standard Tamiya connector.
- 9.6V Tamiya RC Battery Pack fit for 1/20 RC Tank, work time is 3-4 times than other 9.6V 700mAH Battery, charge time is 6-10 hours.
- Make sure your battery size same as this one, and plug is same as Tamiya standard plug, one hole is half circle,another hole is square,Just as product picture show.NiMH Battery Pack 9.6V 2000mAh High Capacity Rechargeable RC Battery with Standard Tamiya Connector for RC Car, Robots, Security
User questions & answers
Question: | Will the provided charger also support nicad 600mah 9.6v pack |
Answer: | Hello, it is factory label for different battery. Yours sincerely |
Question: | Will the provided charger also support nmhi 600mah 9.6v pack |
Answer: | Hi,Connie, this battery will perfectly work with your traxxas slash 1/10 scale with super power. Yours sincerely |
Question: | Will the charger work on the fisher price spike the dinosaur |
Answer: | I believe the 7s is slightly larger than the Mini 9, so the case would not fit properly. |
Question: | Does this work with Spike the Dinosaur from fisher price |
Answer: | No, it won't fit. For Fujifilm Instax Mini 90 Neo Classic Instant Film Camera, you can enter B075V1RD9Z directly into Amazon’s search bar for compatible case. |
- 【High Capacity】- A capacity of 3600mAh with 6 cells ensures a long life of your RC models. Zeee NiMH battery measures 135.5*45.5*22.6mm/5.33*1.79*0.88 inch(L*W*H), Approx Weight: 367.3g/0.8lb.
- 【High Power】- Zeee 7.2V NiMH battery provides 30 amps of discharge current, pushing your RC models to the top of its capabilities. Specifically designed for high performance RC hobby.
- 【Application】- Compatible with classic RC truggy, RC boat, RC tank, RC car like Tamiya, LOSI, Associated, HPI, Kyosho, etc.
- 【Easy and convenient use】- Zeee 7.2V NiMH battery has no memory effect, which allows you to recharge your batteries at any time.
- 【What you get】- 2 Pack of Zeee 7.2V 3600mAh NiMH Battery Hard case with Tamiya Plug. After-sales Service: Every Zeee Product has 30 Days Money Back Guarantee & 12 Months Warranty. Please contact us immediately if you have any problems, we will reply you within 24 hours.
User questions & answers
Question: | Isn't the "C" rating the limit to the power you can expect to draw from the battery in amps |
Answer: | C rating usually refers to the maximum safe discharge rate of a cell. In my experience it doesn’t usually play into Ni batteries for RC because they taper off during discharge. More important for LiPo setups |
Question: | Will it fit in a Tamiya Bullhead |
Answer: | If it takes a standard 6 cel 7.2 v then yes its basically 6 c cell batteries in 2 rows of 3 |
Question: | Do these work with la trax teton |
Answer: | No they do not. These are standard sub-c cell packs for use in traditional 1/10th scale vehicles. |
Question: | Does this battery connect to starter box |
Answer: | Not sure what you mean by starter box, it is a standard Tamiya plug. I use my batteries in a Torro tank. |
Product features
7.2V 3600mAh High Capacity 6-Cell NiMH Battery Pack with Tamiya Plug for RC Cars, RC Truck, RC Airplane, RC Helicopter, RC Boat
Zeee Power is one of the largest Lipo battery manufacturer around the world, which is focus on research, development and production of Li-Polymer batteries for over decades. We are committed to provide more professional and safer batteries for every consumer.
Our company import the most advanced production technology and strict QC teams to control the quality and security of batteries. Zeee Power Lipo batteries provide flat discharge curve, excellent performance at low temperature and high discharge rate, to reach the top speed with the most stability and power your rc models.
Friendly Service for all RC Battery from "Zeee":
- 30 days for no-reason return
- 6-Months for replacement if any issue occurred
- Email reply within 24 hours.
Wide Compatiblity
Zeee 7.2V NiMH Battery compatible with all models in the following:
- Redcat Volcano EPX
- All RC10 cars / Hornet
- Big "Monster Patrol" RC Truck
- Revo 3.3 / Redcat Volcano EPX
- Thunder Tiger Phoenix XB
- Hot Wheels / Tyco Dune Devil R/C car
- RC10T4 / Traxxas, LOSI, Associated
- HPI, Tamiya, Kyosho, etc. (NOT for Traxxas slash 1/16)
Tips for Charging
- NEVER over-charge or over-discharge it
- NEVER charge the battery unattended
Tamiya Plug Type
- Zeee 7.2V 3600mAh NiMH Battery comes with Tamiya Connector
- Please use professional NiMH battery charger
High Capacity 7.2V 3600mAh NiMH Battery
- For the RC battery, only if the voltage and the plug match, then it will fit.
- NiMH batteries are potentially hazardous. Improper usage can cause fire or explosion.
Product description
Specification
•Battery Chemistry: Lithium polymer
•Configuration: 2S
•Voltage(V): 7.4V
•Capacity(mAh): 5200mAh
•Discharge(C): 80C
•Dimension:(L*W*H):5.35x1.77x0.95 inch/136x45x24 mm (error 0-3mm ).
Battery Weight:9.9oz/281g.
•Connector Type: TR Plug •Balancer Connector Type: JST-XH
Charging Attention
•1. Please use Professional lipo battery charger.
•Please don’t Leave a Battery Charging Unattended!
•2.Please check carefully the battery condition about the battery surface and battery voltage before using or charging.
•3.Please read the instruction carefully before using or charging.
•4.Please recharge your batteries regularly, do not wait for the battery to run out before charging it.
•5. If the new battery won’t hold a full charge or loss the charge very quickly in a short time, please use Balance Charger to charge and recycle several times first.
Some Tips for you
•Easy way to check your lipo battery Capacity of currently status (for example 4.2V battery):
100%----4.20V
90%-----4.06V
80%-----3.98V
70%-----3.92V
60%-----3.87V
50%-----3.82V
40%-----3.79V
30%-----3.77V
20%-----3.74V
10%-----3.68V
5%------3.45V
0%------3.00V
•ATTATION
: Never to let the voltage below 3.7V or more than 4.2V
•Package List
•2x5200mAh Battery
•2x User manual
- 【SPECIFICATION】- Material: Li-polymer; Voltage:7.4V; Cell: 2S; Capacity: 5200mAh; Discharge: 80C; Discharge connector: TR plug .
- 【SAFETY &Quality GUARANTEE】- The lipo rc battery Built-in protection mechanism ensures safe charging and use.It comes with a balance lead protector, it can effectively prevent the plug from falling off.
- 【5200mAh BATTERY】- The 5200mAh battery increase the runtime for you RC device.The 80c burst rate gives you enough power for acceleration. Long cycle life (150 times minimum),Up to 200Wh/kg energy density.
- 【WIDE COMPATIBLE】- Useful for RC Car, RC Buggy, RC Truck, RC Truggy ect. Battery dimension:(L*W*H):5.35x1.77x0.95 inch/136x45x24 mm (error 0-3mm ). Battery Weight:9.9oz/281g Please check the dimension,voltage,T plug before you order it.It can works well in your RC devices if these three aspects are suitable.
User questions & answers
Question: | Will these fit in the Traxxas Summit |
Answer: | Please see another answer I just left on this page where I explain a process to make it work |
Question: | Will these fit/be good for a arrma kraton 4s |
Answer: | Yes, I see the toy use same 9.6V NIMH battery and same tamiya plug , this battery fit fish price spike the dinosaur,thanks. |
Question: | Would these fit in my e-revo 1/16 VXL |
Answer: | Dylan ,if it says no batt. try another batt. and if charges your batt might have a broken or loose wire try moving around the wires while its trying to charge. |
Question: | What lipo charger do you recommend for povway 5200mah 80c 7.4v 2s rc lipo battery hard case |
Answer: | Hello, the dimension - 139 L x 47 W x 25 H mm. Yours sincerely |
- 【Zeee 2S 8000mAh Battery Specification】- Material: Lithium polymer; Battery voltage: 7.4V; Configuration: 2S2P; Cell voltage: 3.2~4.2V; Capacity: 8000mAh; Discharge: 100C; Plug: Deans T Connector.
- 【Dimensions】- Zeee 2S 8000mAh lipo battery dimension is: 138*47*25mm/5.43*1.85*0.98inch(L*W*H); Approx Weight(±15g): 11.3oz / 320g.
- 【Application】- Zeee 8000mAh 2S lipo battery special designed for professional 1/8 scale and 1/18 scale RC car hobby models such as: Traxxas Slash, Emaxx, Bandit, Rustler version, Losi, Team Associated, etc.(Only if the voltage, dimension and the plug match, then it will fit for your model)
- 【High Performance】- Zeee 7.4V 8000mAh lipo battery with 100C discharge rate hardcase offers you very high power and very long run time for your RC cars.
- 【What You Get】- 1 Pack Zeee 2S 8000mAh lipo battery with Deans T connector. Ater-sales Service: Every Zeee Product has 30 Days Money Back Guarantee & 12 Months Warranty. Please contact us immediately if you have any problems, we will reply you within 24 hours.
User questions & answers
Question: | Can i use this battery in my JLB cheetah |
Answer: | No they are too big. These are for 1/10 and bigger |
Question: | Will this work fine with a wltoys a959b |
Answer: | A lipo charger is a lipo charger, it doesn't make much difference. I have four different kinds of chargers and I have used them all to charge this battery with no issues |
Question: | are these batteries ROAR legal |
Answer: | No, you will need a NiMH charger for a NiMH pack. |
Question: | Will this work with a Redcat blackout xte pro with brushless motor |
Answer: | Yes, USB Charger also work with 9.6V 600mAh NiCd or NiMH battery.thanks. |
Product features
Specification
Brand: Zeee Power
Capacity: 8000mAh
Voltage(V): 7.4V
Discharge Rate (C): 100C
Configuration: 2S2P
Connector Type: Deans Plug
Dimension: 138*47*25mm/5.43*1.85*0.98inch(L*W*H)
Approx Weight: 320g/11.3oz
Charging Attention
- Please use Professional lipo battery charger
- Never Over-charge or Over-discharge lipo battery
- Never charge lithium polymer battery unattended
Compatible RC Models
Zeee 8000mAh lipo battery special designed for professional 1/10 scale and 1/8 scale RC car hobby models such as Traxxas Slash, Emaxx, Bandit, Rustler version, Losi, Team Associated, etc.
Only if the voltage, dimension, and the plug match, then it will fit.
Deans Plug & High Quality Cells
Zeee 2S 7.4V 8000mAh rc lipo battery comes with Deans Plug & High-current, power Connector on Power Cell LiPo Battery.
Product description
⚠Please Note:
our lipo battery with Tracxas plug have not ID function,not suit for the new Tracxas RC models or chargers with Tracxas ID plug.You can buy a old Tracxas plug to new Tracxas ID plug adpter.
Tracxas lipo batteries Description:
Brand: Youme
Material: lithium polymer
Capacity: 5200mAh
Cells: 3s
Voltage: 11.1V
Discharge Rate: 50C
Voltage per cell: 3.7V
Max voltage per cell: 4.2V
Charge Plug:JST-XH
Discharge Plug: Tracxas plug
Silicone wire: 10awg
Suggest charge rate: 1C
Suggest charger: balance charger
Dimension:135*42*30(±0-3mm)/5.3*1.65*1.18inch
Weight: 376g/0.82lb/13.3oz
rc lipo batteries Packing list:
2pcs x Youme 3S 5200mAh 11.1v LiPo Battery 50C with Tracxas Plug
3s lipo battery Fits These RC Models
★Tracxas Slash VXL, Slash 4x4 VXL, 1/10 Rally, XO-1 Supercar, E-Maxx Brushless, E-Revo Brushless and Spartan models
★Tracxas Rustler VXL,Bandit VXL ,Stampede VXL ,Stampede 4x4 VXL
★Tracxas Aton Plus Quad Rotor Helicopter ,Tracxas Aton Quad Rotor Helicopter
About us
Youme is RC lipo battery manufacturer who only focus on supplying power for drones, UAV, UAS and FPV etc.
Please Notice:
❶Please stop charging immediately when the cell voltage been charged to 4.2v (Normal cell voltage is between 3.7v~4.2v,please don't overcharge and overdischarge).
❷To double make sure safety, please have a check first whether the battery surface is alright when you get it and whether the voltage is normal before using.
❸If the new battey won’t hold a full charge or loss the charge very quickly in short time, please use Balance Charger to charge and recycle several times
- 【WHAT DO YOU GET】shorty 3s lipo battery 5200mah 50c Tracxas plug lithium polymer battery pack,huge Capacity,high burst,quickly recharged,long cycle life(150times minimum),up to 200Wh/kg energy density
- 【SPECIFICATION】material: li-polymer; battery voltage: 11.1v; cell: 3s; cell voltage: 3. 7~4. 2v; capacity: 5200mah; discharge: 50c;discharge plug: Tracxas connector.Dimension:135*42*30cm/5.3*1.65*1.18inch ; net weight:376g/0.82lb/13.3oz.
- 【APPLICATION】3S 5200mah lipo battery suitable for RC helicopter,airplane,multirotor,Boat,Car,Truck,Tracxas models 1/10 scale vehicles or larger,Tracxas RC Cars, Slash VXL, Slash 4x4 VXL, E-Maxx Brushless, E-Revo Brushless and Spartan models(Only if the voltage, dimension and the plug match, then it will fit)
- 【VOLTAGE NOTE】 3S RC Lipo Battery Built-in protection mechanism ensures safe charging and use.Don't overcharge more than 4.2V and don't over discharge below 3.7V,Never leave battery unattended when charging.
User questions & answers
Question: | What amp rate should I charge my 5200mah 3s 50c 11.1v lipo at on a Traxxas ez-peak dual charger |
Answer: | General rule of thumb that I have always followed is dividing the MAH by 1000 so at 5200 I set it to 5.2 |
Question: | Will these work on a traxxas slash 4x |
Answer: | I am using these in that exact same truck. They work great. It’s been a while since we’ve used ours. I bought the adapters to go from the TRX plug on the truck to the plug on these batteries. Get yourself a good charger that can balance charge and also put them back into storage mode. |
Question: | Do these work in the traxxas trx |
Answer: | Yes |
Question: | Will these fit the Traxxas udr |
Answer: | Yes it will. They are very good batteries you |
Product description
Zeee is a professional brand specializing in the research, development, production and sales of Li-polymer batteries.
Features
- Light weight, long cycle life, no "memory-effect".
- High power battery, high capacity provide your rc model more energy, more enjoyment.
- High Discharge rate, make your rc vehicle work powerfully.
Specification
Brand: Zeee
Chemistry: Lithium Polymer
Cell Number: 3
Voltage(V): 11.1V
Capacity(mAh): 5200mAh
Discharge Rate (C): 80C
Charge Plug Type: JST-XH
Discharge Plug Type: Deans Plug
Battery Dimension: 139*47*37mm/5.47*1.85*1.46inch
Approx Weight: 380g/13.4oz
Compatible RC Models
- Zeee 3S 80C 5200mah Lipo Battery special designed for professional 1/10 scale and 1/8 scale RC car hobby models such as: Traxxas Slash, Emaxx, Bandit, Rustler version, Losi, Team Associated , etc.
- It also could be used for RC airplane, RC helicopter, RC boat, drone, FPV, only if the voltage, weight, dimension and plug match.
High Performance
- Zeee 11.1V lipo battery 5200mah with 80C discharge rate offers you very high power and very long run time for your RC cars.
- Zeee 11.1V 3S lipo battery 5200mah provides your batteries very solid protection, it comes with an equipped Deans plug. They are your ideal chooses for the RC car hobby.
Package Including
2 Pack of Zeee 11.1V 80C 5200mAh Lipo Battery with Deans plug
Attention
1) Lipo batteries are potentially hazardous. Improper usage can cause fire or explosion.
2) Charge only with a lithium polymer (LiPo) battery charger
3) Do not charge the battery to more than 4.2V per cell&Do not discharge below 3.2V per cell under load
4) If the new battery won’t hold a full charge or loss the charge very quickly in a short time, please use Balance Charger to charge and recycle several times first.
- 【Zeee 3S 5200mAh RC Lipos Specification】- Material: Lithium polymer; Battery voltage: 11.1V; Configuration: 3S1P; Cell voltage: 3.2~4.2V; Capacity: 5200mAh; Discharge: 80C; Connector type: Deans Plug.
- 【Dimensions】- Zeee 5200mAh 3S lipo dimension is: 139*47*37mm/5.47*1.85*1.46inch(L*W*H); Approx Weight: 380g/13.4oz.
- 【Application】 - Zeee 5200mAh 3S RC Lipo battery fit for Lipo Battery special designed for professional 1/10 scale and 1/8 scale RC car hobby models such as: Traxxas Slash, Emaxx, Bandit, Rustler version, Losi, Team Associated, etc(Only if the voltage, dimension and the plug match, then it will fit).
- 【High Performance】- Zeee 5200mAh 3S lipo battery with 80C discharge rate hardcase offers you very high power and very long run time for your RC cars. They are widely fit the 1/8 and 1/10 RC car model.
- 【What You Get】- 2 Pack of Zeee 11.1V 80C 5200mAh Lipo Battery with Deans Connector. After-sales Service: 30 Days Money Back Guarantee & 12 Months Warranty for Quality-related Issues. Please contact us immediately if you have any problems, we will reply you within 24 hours.
User questions & answers
Question: | Just recieved my 2-pack 80c 3s 5200mah and one of the batteries has a cell at 3.61. Can I charge and discharge to balance it out? Please advise |
Answer: | I have some batteries that will randomly do that to me and they usually always balance out just simply charging it. |
Question: | Will this fit in a traxxas rustler 4x |
Answer: | Yess, You will have to change the connectors on both the batterys and the Rc car but Yes, the Zeee battery should work |
Product features
Specification
Brand: Zeee
Capacity: 5200mAh
Voltage(V): 11.1V
Discharge Rate(C): 80C
Configuration: 3S1P
Connector Type: Deans Plug
Dimension: 139*47*37mm/5.47*1.85*1.46inch(L*W*H)
Approx Weight: 380g/13.4oz
Charging Attention
- Please use Professional lipo battery charger
- NEVER Over-charge or Over-discharge lipo battery
- Never charge lithium polymer battery unattended
Compatible RC Models
Zeee 3S 5200mAh lipo battery fit for Lipo Battery special designed for professional 1/10 scale and 1/8 scale RC car hobby models such as: Traxxas Slash, Emaxx, Bandit, Rustler version, Losi, Team Associated, etc.
Only if the voltage, dimension and the plug match, then it will fit.
Deans Plug & High Quality Cells
Zeee 11.1V 5200mAh lipo battery comes with Deans Plug and JST-XH Charge Balancing Connector & High-current, power Connector on Power Cell LiPo Battery.
Product description
Package inculde:
2 x 7.4V 500mAh Li-ion rechargeable battery
2 x USB Charger cable for 7.4V 2S lion or Lipo battery.
1 x Blomiky clean wipe
- Battery Capacity 7.4V 25C 500mAh Rechargeable Li-ion Battery. Battery plug:5500, Package include:2 Pack Battery and 2 Pack USB Charger Cable. Battery fit for Gxatt 1: 16 All Terrain Green Remote Control Truck.
- Battery dimensions:2.15*1.12*0.58 inch /55*28.5*14.8mm (L*W*H),one battery weight:38g/1.34oz. 7.4v 2S 500mAh rechargeable battery fit for 1/16 Scale Hosim 9130 9135 9136 9137 9138 9145 RC Truck and RC Cars
- 5500 Battery connector plug. 7.4v 2S 500mAh rechargeable battery fit for 1:16 Scale Blomiky and Xinlehong 9130 9135 9136 9137 9138 9145 RC Truck and RC Cars
- USB Charger cable Built in over charging, over discharging, over temperature protection. Ensure safe charging and using
- 9136 9137 9138 9145 RC Truck and RC Cars Replace Rechargeable Battery. Battery fit for Gxatt 1: 16 All Terrain Green Remote Control Truck
Latest Reviews
View all
Nyx New Lipsticks
- Updated: 10.01.2023
- Read reviews

Cap For Women Gucci
- Updated: 31.05.2023
- Read reviews

Domestic Sewing Machine
- Updated: 26.01.2023
- Read reviews

Survival Fire Starters
- Updated: 22.05.2023
- Read reviews

Microphone Headsets
- Updated: 25.06.2023
- Read reviews