14 best rc car battery chargers

Product description

RC car Battery Charger for 4.0V-9.6V NiMH/NiCd Battery Packs, 400mA Charging Current for 5-10 Cells Battery, 700mA Charging Current for 2-4 Cells Battery, AC Plug Charger w/ Standard Tamiya Connector, Mini Tamiya, JST Plug, SM Plug 2P, Barrel Plug, JR/Futaba Receiver Connector, Frsky X9D (Plus) QX7 QX7s X9E Battery Plug PH2.0 2-pin for RC Hobbies, Airsoft Battery Packs, also the barrel plug can connect to frsky x9d transmitter to charger stock battery



Charger Specifications:

Input: 100-240V AC

Output: 4-12V 400-700mA

Connector: Standard Tamiya Connector, Mini Tamiya, JST Female 2-pin Plug, SM Plug 2-Pin, Barrel Plug 5525, JR/Futaba Receiver Connector, Frsky X9D (Plus) QX7 QX7s Battery Plug PH 2.0 2-pin Applicable Battery Type: NiMH/NiCd

Compatible Battery Voltage: 4V-12.0V

Operating Temperature: 0 ~ 40°C

Storage Temperature: -20 ~ 85˚C

Dimensions: 78*45*27mm (L x W x H)

WARNING - DO NOT CHARGE LiPo Batteries



DO NOT CHARGE More than one battery at a time.

DO NOT CHARGE: if the label on your battery says: LiPO, LIPO, Li-Po, LI-PO, Li-Polymer, Li-Poly, Lithium Polymer, Li-ion, Lithium-Ion, Lithium.

Caution: LiPo battery packs may often have two sets of leads/connectors - do not charge if identified as LiPo battery. Failure to follow these warnings may result in fire or personal injury.

Contact our customer support team if you are unsure if your battery can be charged.



Package include:

1 x charger

1 x set of plug adapters (6 types)

• The 12V 400mA-700mA NiMH battery charger can charge NiMH/NiCd battery packs that are 4.8V, 6V, 7.2V, 8.4V, 9.6V 12.0v (2-8 cells). NOTE: This charger is only for recharging NiMH/NiCd batteries, do not charge LiPo batteries.
• RC Car Battery Charger for NimH NiCd battery pack from 2.4v to 12v - Cover 90% Rc Car Battery with Tamiya battery Plug, mini tamiya battery plug, JST battery plug, SM 2P battery plug, Futaba/JR Receiver Plug, Frsky X9D X9D Plus X9E QX7 QX7s Battery Plug, also barrel plug can connect to frsky x9d transmitter to charger stock battery
• AC to Dc power adapter charger with terminal barrel plug 55mm (outer diameter) x 25mm (inner diameter) can be used to charger FrSky Taranis X9DP/X9E transmitter battery and other device
• The simple LED indicators your battery charging status. Green light for fully charged and red light for charging Processing.
• ADVANCED PROTECTIONS - Charger has built-in safety protections against reverse polarity, short circuit, and over-current protection. The universal 100-240V AC input enables this charger to be used anywhere. Buy with confidence under 12-month warranty.

User questions & answers

Question:	Hello, i lost my instructions for this, can you link me a manual for this please
Answer:	Yes it can be. You will need a 50 amp breaker for a generator this size and make sure the power supply cord is rated for 50 amps also. I purchased the Conntech bundle package which includes a 15ft power cord along with the plug-in box for $169 here on Amazon along with the 50amp double pole breaker for about $20.
Question:	Does it auto sense full charge and shut off
Answer:	SC2000i has its engine made from Yamaha, SUA2000i has the engine built from less known Senci(but as reliable)
Question:	I plug charger into battery. light goes green in 10 minutes. batteries last for 5 minutes? do i need to charge longer even though charger light shows
Answer:	If I am not mistaken AI Power makes their own engines and got into the generator business in recent years.
Question:	Im replacing a charger for a rc dodge charger replica from the movie fast&furious, is this the right one
Answer:	Everything is made in China. Even my underpants

• One charger for many battery packs - Tenergy TB6-B balance charger/discharger is ideal for all hobby battery packs that are NiMH, NiCd, LiPO, Li-ion, LiFePO4, and SLA battery packs.
• Wide connector compatibility - With one multi-charging harness, this AC balance charger is compatible with battery packs with tamiya, mini tamiya, JST, HiTec, EC3, Deans, XT60, and bare leads connectors so that additional connectors can be added.
• Works with multiple voltages - Compatible with battery packs with voltages that ranges from 6 to 12 for nickel metal hydride or nickel–cadmium battery packs and Lithium-ion battery packs with voltages from 3.7 volts to 22.2 volts (1s-6s).
• Multiple functions - More than a regular digital balance charger, Tenergy TB6-B comes with features like Li-ion and LiPO balancing, fast charging, data storage, cyclic charging, discharging, and much more for all of your battery packs.
• Easy to read screen - View all charging statuses and settings on the electronic balance charger LCD screen as you navigate the modes and selections. Buy with confidence, your charger includes Tenergy a 12-month warranty.

User questions & answers

Question:	Does this have a ec3 banana connector
Answer:	no manual for this dude plug the, part that goes in the outlet in find the size adapter and plug it in to your battery if none fit you need another type charger
Question:	Can this charge nimh packs that have a banana connector? If not, can you get me a link
Answer:	No it does not. It’s just a cheap simple thing. It doesn’t even tell u if it is fully charged or not
Question:	Can the tenergy tb6-b be used to discharge a battery in order to measure its capacity
Answer:	I'm not sure why the charger is indicating the battery is charged so soon! If I were you I'd buy a new battery! Because no battery charges in 5 minutes! Or last just 5 minutes! Buy, a new battery! I have this charger and when I charge my batteries it takes over night to charge! Hope this helps!
Question:	Can you give me an estimate how long this takes to charge batteries? Say a 7.2v 1600mAh NiMH or a 7.2v 3200mAh LiPO
Answer:	could be

• Battery Variety Charging: The battery charger can support many kind of batteries;Use with LiPO, Li-ion, LiFePO4, NiMH, NiCd,and SLA battery packs.
• Wide Voltage Compatibility: Use the battery pack balance charger on LiPo: 1-6 cell; NiMH: 1-15cell; NiCd: 1-15 cell; Li-ion: 1-6 cell; PB: 2-20V; LiFe: 1-6 cell; LiHv: 1-6 cell; Smart Battery: I,II,III. So it is very useful.
• Multiple Functions: Except charge, balance and discharge,this charger comes with features like Li-ion and LiPo balancing, fast charging, data storage, cyclic charging and discharging and much more for all of your battery packs;Terminal Voltage Control; Lithium Battery Capacity & Voltage Checking;
• Easy to Read: View all charging statuses and settings on the electronic balance charger LCD screen as you navigate the modes and selections.The charger shell is made of high-quality fireproof materials and has passed the experimental certification, so it can be used safely.
• What You Can Get--1×battery charger; 1×adapter; 1×AC power cable; 1×DC crocodile clip; 1×octopus multi-charging harness; 1×battery protective bag; 1×manual.

User questions & answers

Question:	Can this charge at .5 amps? My batteries are 450mah and a safe charge would be at .5A can this charger do that
Answer:	No xt90 connector can get one on Amazon for $6
Question:	Does this come with dean connectors
Answer:	yes it will , i have a ASSOCIATED 738 WolfPack LiPo 2S 7.4V 3800mAh 25C Shorty ASCC0739 .It will also charge the Team Associated 317 Reedy LiPo 5200mAh Square 7.4V 50C Competition Battery and any battery from there on down.
Question:	Does it come with an xt30 connector
Answer:	This is a $10-15 dollar item. When sold at this price range the seller makes 20-30% profit on the product. Now if you buy this same item for $60 your giving your hard earned cash away. I purchased 5 of these from the same factory directly from China 10-12 yrs ago. I see this item now being sold for an absurd price. How is this possible? So long as it sells do you think Amazon cares or the seller. If the buyer has no clue that a design is simply being repacked and labeled and praised as amazing that person unaware will buy. Now people if your lucky enough to be reading this look elsewhere and best wishes. I had to write this not to mess with Tenergy's bottom line but the markup is to extreme and I'm watching buyers flood in unaware or unknowing what there buying. This is a wide spread problem that I'm watching on Amazon not specific to this product. Great for sellers but buyers are getting hosed thinking they are getting a deal as they buy on trusted amazon for a good online deal yet they are now paying for many items a 50% markup. Good luck to you my friend. Where safety is concerned if your buying this item and are unaware then you need to buy an actual charger that has you best intentions at the price point $60 ^.
Question:	Will this ship to Alaska
Answer:	This charger's max charge rate is listed at 5.0 A (5000mA). From here you just do the math... mAh = milliAmphours. If your battery is a 1600mAh capacity, that means you can run an electronic device drawing 1600mAh for 1 hour before your battery is exhausted. The same thing applies to charging. If you want to charge your 1600mAh battery at the 5000mA rate, it would be 1600/5000 = 0.32 * 60 minutes = 19.2 minutes total charging time.For your 3200mAh battery, it would be 38.4 minutes.Hope that helps!

• [Universal Voltage Compatibility]- the battery balance charger support LiPo/Li-ion 3.7V-22.2V (1S-6S), with voltage capabilities such as 7.4V, 11.1V, 14.8V. LiFePO4 3.2V-19.2V (1S-6S), with popular options of 9.6V, 12.8V, 16V. LiHV 3.8V-22.8V(1S-6S). NiMH/NiCd 1.2V-18V (1S-15S), with popular options of 6V, 7.2V, 9.6V, 12V. PB 2-20V (1-10 Cells) and smart battery.Note: Do not choose the wrong type of battery when charging.
• [Multiple Functions]: Compare to a regular digital balance charger,C150 Battery Charger comes with features like Li-ion and LiPO balance charging, fast charging, data storage, battery meter, NiMH cyclic charging and discharging and much more for all of your battery packs
• [Terminal Voltage Control]- This Charger allows user to set the charge/discharge end voltage of the battery. For example:lipo battery end voltage is 4.2V /cell when charing, while on this charger, the end voltage is adjustable, rangs from 3.85v to 4.3v. Warning: this features for expert only!
• [Smart Protection]:Low input voltage limit, automatic charge current limit, Delta-peak sensitivity, capacity limit, processing time limit,temperature threshold. Data storage and loading: 20 memory data. Firmware update
• [What You Get] - The AC/DC balance charger comes with AC Power Cord,DC Cable,Balance Board,Explosion Proof Bag .Package also comes with octopus multi-charging harness with TAMIYA, TAMIYA mini, JST, T Plug, EC3,TRX,Deans connectors to be compatible with many charging connectors

User questions & answers

Question:	Can it check battery resistance
Answer:	Yes ,B6 V2 can , the max charger current is 600 mah . You can use it to charge your battery with confidence.
Question:	Can I use this with a multiple battery charging/balance plate to charge/balance two lipo batteries at the same time? If so which board should I buy
Answer:	Yes,it come with dean connectors.
Question:	Well this charge my traxxas lipo 3s battery
Answer:	no ,it comes with T plug,TRX,TAMTYA,TAMIYA MINI,FUTABA,XT60,JST,EC3...
Question:	Does it auto switch off when the battery is full
Answer:	I am so sorry ,it can not ship to Alaska.

Product features

Please Connect the Charger and Battery Correctly in the Order of Connection Before Starting Charging

1.About the positive electrode electrode and negative electrode interfaces,you need to connect correctly,otherwise,it will fail to charge.

2.About the connectors,you need to connect correctly,otherwise,it will fail to charge.

3.If you choose the balance mode ,about the balance ports,you need to connect correctly,otherwise,it will fail to charge.

4.After setting ,press the "ENTER" button for 3 seconds,then you can charge the battery.

Wide Voltage Available

Supported NiMh NiCd rechargeable batteries from 1.2v - 1.8v (1-15S), Lipo Li-ion rechargeable batteries from 3.7V to 22.2V (1-6S), lifepo4 rechargeable from 3.2v to 19.2V (1-6S), SLA rechargealbe batteries from 2V- 20V,and smart batteries Ⅰ、Ⅱ、Ⅲ.

Superior Safety

C150 Balance Charger adopted high tech support 100% safe charging with advanced over-current, over-discharge, over-voltage and short-circuit protection for your battery pack

Multi-working modes

C150 lipo charger with multi-woking modes:Fast charge,Balance charge,discharge,circle node,storage mode

• 【NiMH/NiCD Battery Charger】The charger is professionally designed for 2-8s NiMH/NiCD battery(2.4-9.6V) of drone, RC car, RC boat, airsoft gun, etc.Smart charging, with overcharge protection, free your time.
• 【Input and Ouput】 AC input voltage:100-240V. Output power：20W, charging current: 1A/2A. Charging current can be selected with a switch on the side of the charger.
• 【Easy to Use】This charger comes with standard tamiya connector and a free charging cable with mini Tamiya, so you can charge your NiMH/NiCD battery easily. Just need to plug the AC cord and connect your battery and the charger.
• 【Two-color Indicator】Steady red light indicates that charging is in progress, steady green light indicates that charging is completed, red and green flash alternately indicates that the battery is not connected.
• 【Note】This charger is only suitable for NiMH/NiCD batteries. Please do not charge when left unattended.The charger shell is made of high-quality fireproof materials and has passed the experimental certification, so it can be used safely.

User questions & answers

Question:	Will this work with 7.2v 1800 mah nimh battery
Answer:	yes,this charger has Resistance Meter
Question:	Will this charge my 7.2V battery
Answer:	No, in this case, you should choose a charger that supports dual-channel charging, such as the C240, T240 and T400 in our store. All three chargers support charging 2 different types of batteries at the same time.
Question:	what type of connectors does this nimh charger has
Answer:	Ofc it charges any batt as long as you have it hooked up right
Question:	Will the Battery automatically turn off or just turn green saying its filled
Answer:	yes,this charger will cutoff working when the safety time is up to the setting value

Product description

The Traxxas iD battery system is the easiest and safest way to charge your Traxxas batteries. The EZ-Peak Plus recognizes Traxxas iD batteries and in an instant automatically configures and optimizes the charger settings. There's no need to be a battery expert or learn how to navigate complex menus. Just plug in a Traxxas iD battery and EZ-Peak Plus (#2970) does all the work for you. The integrated balance connector on Traxxas LiPo iD batteries eliminates fragile balance wires and connectors, along with the need for external balance boards. At the press of a button, the EZ-Peak Plus' Storage Mode protects your LiPo battery investment by safely preparing the batteries for extended storage. 4-amp fast charging and advanced high-resolution peak detection deliver a perfect charge every time. The EZ-Peak Plus is backed by the Traxxas Lifetime Electronics Warranty for years of reliable service.

• Charger recognizes Traxxas iD batteries to automatically program and optimize charger settings. Charges 5-8-cell NiMH batteries and 2S and 3S LiPO batteries
• One button LiPO storage charge protects your battery investment and advanced high-resolution peak detection delivers a perfect charge
• Easy to use interface with charge progress indicator and integrated cooling fan
• Advanced Mode for full manual control of charger settings and integrated balance ports for conventional LiPO batteries
• Refer user manual for troubleshooting steps

User questions & answers

Question:	will this battery work with 1/10 e-revo
Answer:	Yes,this nimh charger can charge 7.2v 1800 mah nimh battery
Question:	Can I use a parallel wire harness with this and charge two lipos at once
Answer:	sure,it can charge your 7.2v nimh battery
Question:	Is this dual voltage ? 110V-220/240V
Answer:	This charger has standard tamiya connector ,mini Tamiya connector
Question:	I plug mine in with no battery connected, nothing happens. With the battery connected, nothing happens. Do you believe my unit is defective
Answer:	The green indicator light indicates that the battery is fully charged.

Product features

A Traxxas-Exclusive Innovation

Traxxas iD-equipped chargers are the only way to take full advantage of your iD-equipped batteries. The Traxxas iD battery system is the easier and safer way to charge your Traxxas batteries.

The Traxxas 2970 EZ-Peak charger instantly recognizes Traxxas iD batteries and automatically configures the charger settings for you. There's no need to be a battery expert or learn how to navigate complex menus. The Traxxas iD system helps to eliminate costly charging errors by removing the guesswork. Just plug in a Traxxas iD battery and EZ-Peak Plus does the rest. Battery charging is easier and safer than ever before.

One Button Simplicity

Other chargers require you remember formulas and battery-specific data to avoid costly battery damage. With the Traxxas iD system, all you do is plug in your iD-equipped battery and press the start button. The charger automatically detects which battery you are using and performs all necessary calculations instantly.

Multi-Chemistry Charging

The EZ-Peak Plus charges both NiMH and LiPo batteries. Charge 5-8 NiMH batteries or 2-cell or 3-cell LiPo batteries without the hassles of conventional chargers.

Three Charge Modes

The Traxxas 2970 charger features three charge modes for your LiPo batteries. Choose Storage Mode to protect your LiPo battery investment by properly setting up your batteries for extended storage periods. Choose Balance Mode to balance your LiPo batteries' individual cells or Fast Mode when time is limited.

LED Progress Bar

The easy-to-use progress bar keeps you informed on your battery's charging status. Just plug in your iD-equipped battery and press the start button. When the charge status light turns green, you're finished. Nothing could be easier.

Legacy Battery Support

Charge your non-iD equipped Traxxas batteries with ease. The EZ-Peak Plus features a port on the front for older Traxxas LiPo batteries with separate balance connectors. A separate Advanced Mode allows you to configure the charger manually. The 2970 charger is the only charger you will ever need.

Traxxas Customer Support

When you buy a Traxxas, you become part of the Traxxas family. Our customer support team is here to help you every step of the way. Call on weekdays from 8:30am to 9:00pm Central Time to speak to a friendly R/C expert. We also offer support anytime on our website or via email. Traxxas models are about experiencing total performance and satisfaction, not just in the products, but also with the company that stands behind them.

Quick Features On Ez-Peak Plus (#2970) Charger

• [Wide Battery Type Compatibility]-Similar to our B6 V2, just better.It has the similar function, but is lighter and more cost-effective!The balance charger with high performance microprocessor can charge and discharge a variety of batteries such as 1.2V-18V NiMH/NiCD batteries (1-15 Cells), 3.7V-22.2V LiPo/Li-ion batteries (1-6 Cells), 3.2V-19.2V LiFePO4 batteries (1-6 Cells), and 2V-20V SLA batteries.Note: Do not choose the wrong type of battery when charging.
• [Multiple Practical Functions]-The lipo charger is built in an independent Lithium Battery Balancer to monitor and balance each battery cell, and it has Fast & Storage Charging function, Data Storage & Load function, Cyclic Charging & Discharging function
• [Easy To Operate]-Press the "Batt.Type" button to the user settings or select battery type or exit the program, press the "Start" button twice to the parameters setting, press the "Dec." or "Inc." button to switch over, press and hold the "Start" button to charge battery
• [High Quality & Safe]-Using superior chip and materials to deliver quality performance, and the charger is designed with Reverse Polarity Protection, Short Circuit Protection, Over-Charge Protection, Over-Current Protection and Over-Temperature Protection for safety.The charger shell is made of high-quality fireproof materials and has passed the experimental certification, so it can be used safely.
• [What you get]-The RC car lipo balance charger comes with a AC/DC adapter, a AC cable and a set of wires for all kinds of batteries. And your charger includes a 12 month warranty.

User questions & answers

Question:	Does it have deans type connector
Answer:	This charger is honestly junk. I bought one at the local hobby shop that lasted two weeks, I brought it back there and they couldn't do anything with it. I then purchased another one on here and that one never worked.
Question:	What is the output of the ac/dc adapter that it comes with? 3-4a output
Answer:	You might want to just consider purchasing the TRA2972 Dual ID Charger: http://smile.amazon.com/gp/product/B00XWBW2BO/ref=ox_sc_act_title_1?ie=UTF8&psc=1&smid=AT08HXV5GBPUZThis charger has a manual mode that will allow you to charge ANY Brand LiPo. You simply need to have a Traxxas connector on your battery, Or a simple adapter (For Example a Deans to Traxxas Female, XT60 to Traxxas Female adapter). Your battery must also have the JST-XH style balance plug, which 95% of batteries on the market DO have. This charger has a 2S and 3S JST-XH balance port hidden under a cover on the front of the charger. This allows you to balance charge ANY brand LiPo battery.Now, to answer the question of the Parallel charging board: Yes, it will work. Your board will need the following two things though in order to be able to connect to this charger. First is a Traxxas Plug. Second, you will need a 2S or 3S Balance wire. Most parallel boards come with a 6S wire. But this charger only has a 2S and a 3S balance port. So the 6S wire will be too large. If you have those two things, you're set to use a parallel board.
Question:	I bought this to charge li-ion batteries. how do i do this? there is no li-ion charge selection
Answer:	YES, Dual Voltage!
Question:	Can this charger store and load data
Answer:	I had the same problem, have to return the unit. Pretty ridiculous.

Product features

Wide Battery Type Compatability

This RC battery balance charger with high performance microprocessor can charge and discharge a variety of batteries such as 1.2V-18V NiMH/NiCD batteries (1-15 Cells), 3.7V-22.2V LiPo/Li-ion batteries (1-6 Cells), 3.2V-19.2V LiFePO4 batteries (1-6 Cells), and 2V-20V SLA batteries

Multi Working Modes

• Cyclic Charging & Discharging: Perform 1-5 cycles continually to refresh and balance battery. The interval time between charge and discharge can be set.
• Data Storage & Load: There are 5 memories record for different batteries so you don't have to set everything again next time you charge.
• Fast & Storage Charging: Select between fast charging with current up to 6A or most efficient voltage for storing the batteries according to your needs.
• Lithium Battery Balancer: Internal cell voltage balancer built-in for LiPo,Li-ion and LiFe batteries so you don't need an extra balancer.

Multiple Protection Design

The charger is designed with Reverse Polarity Protection, Short Circuit Protection, Over-Charge Protection, Over-Current Protection and Over-Temperature Protection for maximum safety

Superior Chip

Using superior chip and materials to deliver quality performance

Standard Interfaces

The charger has standard ports for necessary connecting cables.

AC/DC adapter

It comes with a AC/DC adapter, so you don't need to buy a adapter again.

Additional Bonus

The package also includes a set of wires for all kinds of batteries.

• 【Wide Battery Type Compatability】-The 12V 500mA-800mA NiMH battery charger can charge NiMH/NiCd battery packs that are 3.6V,4.8V,6V,7.2V, 8.4V,9.6V,10.8V,12.0v (2-10 cells). NOTE: This charger is only for recharging NiMH/NiCd batteries, do not charge LiPo /Li-ion/LiFePO4 batteries.
• 【RC Car NimH NiCd Battery Charger】 - Cover 90% Rc Car Battery Range with different plugs.
• 【AC to Dc power adapter】-the NimH/NiCd charger with terminal barrel plug, and 5 more plug converters, inc. Standard Tamiya Connector, Mini Tamiya, JST Plug, SM Plug 2P, Barrel Plug,Rc Car Plugs
• 【LED Charging Indicator】-The simple LED indicator displays your battery charging status. Green light for fully charged and red light for charging Processing.
• 【Smart Protections】- Charger has built-in safety protections against reverse polarity, short circuit, and over-current protection. The universal 100-240V AC input enables this charger to be used anywhere.

User questions & answers

Question:	will it work on a 7.2 battery
Answer:	Yes. Also has a few other types.
Question:	Will this charger work on a ni-mh 8*sc3000mah 9.6v battery
Answer:	The label states 15 = 6A. So im assuming its 15 volts and 6 amps. The model number on charger is RC-218 but I couldn't find specs online after quick search.... Appears to be decent
Question:	This charger is so cheap and reliable in quality
Answer:	LIPO batteries are divided into three categories: LiFe, li-ion, and LIPO. So the first choice you have to choose the correct battery type is LIPO, and then choose li-ion if the voltage is 3.6V/cells, LiFe if the voltage is 3.3V/cells, and LIPO if the voltage is 3.7V/cells.
Question:	Will this charger work on geilienergy nimh battery pack 9.6v 1500mah high capacity rechargeable rc battery with standard tamiya connector
Answer:	This Battery Balance Charger has Data Storage & Load function

• 2-Pack High Capacity High Power SC*6 Rechargeable Battery Pack, Nickel Metal Hydride, 6-Cell: 7.2V 3600mAh. Battery Size: Length: 134mm (5.3"), Width: 47mm (1.9"), Height: 24mm (0.94")
• Battery Charger Mode: This NiCD/NiMh battery pack charger has two charger modes: 0.9Amp or 1.8Amp. 0.9A recommended for 900-1800 mAh battery Pack and 1.8A recommended for 1800-5400 mAh battery Pack.
• Versatile charging option: This quickly charger can charge the battery of NiCD/NiMh that Voltage range of 6V, 7.2V, 8.4V, 9.6V 10.8V, and 12V. (Do Not Charge: LiPo, Li-Polymer, Li-Poly, Lithium Polymer, Li-ion, Lithium-Lion, Lithium)
• 100% safety: This charger kit features over-charging, short-circuit, high-temperature and surge protection in a fire-resistant construction.
• What You Get: 2x 7.2V 3600mAh rechargeble battery, 1x standard Tamiya connector with Temperature Sensor, 1x adapter from standard Tamiya to Mini Tamiya, 1xadapter from standard Tamiya to a pair of alligator clip. We provide 1-Year Manufacturer's Warranty and 30 days return policy. Our friendly customer service team will always be happy to assist you.

User questions & answers

Question:	Will the light turn from red to green when charge is complete
Answer:	Yes,it can work on 2-10S nimh batteries.
Question:	What are the batterys dimensions
Answer:	At first, I placed the order with hesitation and doubt, but after receiving the goods, my hesitation and doubt were completely dispelled. This charger is definitely worth the more expensive price, and it is definitely worth the money! Not only can it meet the needs of battery charging, it has functions such as overcharge and short circuit protection, but it is safe and convenient!
Question:	Will these work with a Traxxas T-Maxx
Answer:	Yes, this charger is compatible with your battery pack. Typically for charger compatibility you will need to match chemistry, voltage, and connector. If this matches then it will generally work.

Product features

Product Features:

Battery Type: Ni-MH

Standard Dimension: 15.2*5.5*5.2 cm

Weight: 355g

Capacity: 3600 mAh

Voltage: 7.2V

Widely Compatibility:

Fits with popular standard 7.2V RC cars like RC Cars, RC Truck, RC Airplane, RC Helicopter, RC Boat

*Please Note*

if your car or battery uses Traxxas or any other connector, it will NOT BE a perfect replacement.The connectors that come with this battery are Stardard Tamiya Connector .

Powerextra Universal Smart RC 6V-12V Battery Charger: 6V, 7.2V, 8.4V, 9.6V 10.8V, 12V.

Specifications: Input: AC 100-240V Output: 6-12V, 0.9A or 1.8A

Quick ChargeCurrent 1A for battery packs with capacity from 1000mAh-1800mAh Current 2A for battery packs with capacity above 2000mAh. For 3000mAh pack, charging time is apprx. 1.5 hours

Notifications of LED Lights:

Battery Charging in Progress: Red

Battery is fully charged, trickle charging in progress: Green

Charging Powered on, no battery connected: Green

ONLY CHARGE NIMH/NICD BATTERY PACK, NOT SUPPORTS LIPO BATTERY.

Product description

TargetHobby RC car battery charger, smart universal charger for all RC Car, RC Airplane and Airsoft NiMH /NiCd battery packs 2.4V - 9.6V (2-9 cells pack). With easy to read indicator LED lights that will provide instant charging status.

WARNING - DO NOT CHARGE LiPO BATTERIES

- DO NOT CHARGE: if the label on your battery says: LiPO, LIPO, Li-Po, LI-PO, Li-Polymer, Li-Poly, Lithium Polymer, Li-ion, Lithium-Ion, Lithium.

- Caution: LiPO battery packs may often have two sets of leads/connectors - do not charge if identified as LiPO battery.

**Failure to follow these warnings may result in fire or personal injury.

Voltage Detection

A built in smart feature that will automatically detect battery voltage and charges accordingly.

Technical Specifications

Input: AC 100-240V  50/60Hz  0.2A

Output: 2-4s  700mA

              5-10s  400mA

Connector: Standard Tamiya Connector, Mini Tamiya, JST Plug, SM Plug 2P, Barrel Plug, Huanqi Rc Car Plug,Frsky QX7 XH Plug

Applicable Battery Type: NiMH/NiCd

Operating Temperature: 0 ~ 40°C

Storage Temperature: -20 ~ 85°C

Dimensions: 78*45*27mm (L x W x H)

*Please do not charge battery packs with voltage less than 2.4V or greater than 9.6V.

Safe Charging

With built in temperature sensor to protect battery pack from over heating

Use pulse and negative pulse technology to avoid battery overheating during fast charging, optimized for battery pack's cycle life

Automatically charging ending with negative delta 

Package include:

1 x charger

1 x set of plug converters (6 types，SM plug; Mini Tamiya;HuanQi;JST;Tamiya;Frsky QX7 Transmitter Battery XH Plug)

• MULTIFUNCTIONAL :The NiMH /NiCd battery charger with 5 charging adapters in one,Length: total 45cm; Input cable 30cm; output cable 15cm；INPUT CONNECTORS: 14 AWG 4mm banana plugs. OUTPUT CONNECTORS: SM plug, Mini Tamiya, HuanQi, JST, Tamiya.
• ADVANCED PROTECTIONS - The rc car battery charger has built-in safety protections against reverse polarity, short circuit, and over-current protection. The universal 100-240V AC input enables this charger to be used anywhere.
• HIGH QUALITY - RC Car NimH NiCd Battery Charger Cover 90% Rc Car Battery Range with different plugs. 2 volt battery Charger Cable used Silicone as External Insulation, with Excellent Properties such as High Temperature.
• NiCd/NiMH battery charger cable used silicone as outside insulation, which has excellent properties such as being able to endure high temperatures and flame retardant.
• Saved you time and money;Best multifunction charge adapter,every major connector you want is here so its easy to charge any of your different kinds of batteries.

• Ideal for popular 7.2V RCs - Use Tenergy replacement RC battery to deliver the best performance for your radio controlled brands and hobbies with RC cars, RC tanks, RC trucks, RC boats such as Traxxas, LOSI, Team Associated, HPI, Kyosho, Tamiya brands, RC10 cars, and turntables. Will also fit many other series and models, we recommend matching the connector and measuring the RC unit battery compartment for best fit.
• Trusted performance - The Tenergy 7.2V NiMH Battery Pack has a high capacity rating of 3000mAh that can run your RC car and related applications much longer than NiCd cells.
• Hobby battery charger - Tenergy universal charger is great for most RC hobbies and airsoft guns because it has a standard Tamiya connector, standard to mini Tamiya adapter and standard Tamiya to alligator clips adapter. Works great for any 7.2V, 8.4V, 9.6V 10.8V, and 12V NiMH/NiCd battery packs in RC cars, RC airplanes, RC helicopters, RC trucks, RC tanks, RC boats and airsoft that use a standard Tamiya/mini Tamiya/alligator clips.
• Quick charge - Select between 0.9 Amp (recommended for 900-1800mAh packs) or 1.8 Amps (recommended for packs 1800mAh-5000mAh) on the RC battery charger to quickly charge a battery pack. (Note: This charger only charge for NiMH/NiCd batteries, do not charge for LiPo batteries.)
• Perfectly designed - The RC racing battery made of Sub C NiMH battery cells, each replacement hobby battery dimensions are 5.39" (length), 1.87" (width), 0.95" (height) that can fit many RC cars with standard Tamiya connector. The RC car battery charger has a standard Tamiya connector and supports rapid charging for faster charge times. Buy with confidence, your charger includes a 12-month warranty.

User questions & answers

Question:	Will this fit electric starter mod hsp
Answer:	For a nitro tmaxx? Will it work for a rx batt...yup. Ideal rx batt....no. Too heavy. You can go lipo on the rx batt and see better overall performance and save half the weight.
Question:	Will this turn off automatically if the battery is full
Answer:	yes， it works with 3.6V,4.8V,6.0V,7.2V,8.4V,9.6V battery

• Stay charged up- The 12V 400mA NiMH battery charger can charge NiMH/NiCd battery packs that are 9.6V (8S). NOTE: This charger is only for recharging NiMH/NiCd batteries, DO NOT recharge LiPo batteries or Spike the Dinosaur.
• Hobby battery charger - Power many hobbies with this NiMH/NiCd 9.6V (8S) battery pack charger for your RC cars and or remote controlled toys. Includes a standard/large Tamiya connector. Before purchasing, we recommend finding the voltage and connector for best fit.
• Easy-to-use - The simple LED indicators on this 9.6V battery charger quickly know your battery charging status. Green light for fully charged and red light for charging.
• Advanced protections - This 9.6V RC battery charger has built-in safety protections against reverse polarity, short circuit, and over-current protection.
• 12 months warranty - The universal 100-240V AC input enables this charger to be used anywhere. Buy with confidence, this compact battery charger is compliant with the high standard set forth by CE certification and also includes 12-month warranty.

User questions & answers

Question:	i bought a crawler rc an the battery and charger came with it i ordered 2 extra batteries also an the charger will not charge any
Answer:	This is very good for RC car because they have long energy long life it's very good items very good battery thank you so much that I have own like this tenergy very nice thank you
Question:	Will this charger work for recharging the red spike dinosaur by fisher price
Answer:	If the battery pack is fully charged, the LED light on the charger will turn Green. To ensure that the battery pack will not over-charged, we always recommend that users unplug the battery pack once full charged.
Question:	Is the connector on the charger the female end or the male end? Just wondering because my battery has the female end on it and the picture looks like the male end. WIll this fit on my connector with one square hole and one arch shaped hole
Answer:	Yes it will turn green.
Question:	Will this charge a 6.4v
Answer:	Length: 134mm (5.3"), Width: 47mm (1.9"), Height: 24mm (0.94")

Product description

Our C240 battery charger is a new design dual balance charger,which can charge two different kinds of batteries simultaneously.

Input: AC 100-240V / DC 11-18V

Charge power: AC mode 150W (CH1+CH2=150Watt),DC mode 120W*2 =240W

Discharge power:Max 10W*2

Charge current range:0.1-10A *2

Discharge current range:0.1-2A*2

Lilon/LiPo/LiFe/LiHV cell count :1-6cells*2

NiCd/NiMH battery cell count:1-15cells*2

PB Battery voltage:2-20V*2

Smart battery:I/II/III*2

Current drain for balancing: 500mA/cell

Net Weight:0.48kg

Dimension:145*105*64mm

Gross weight:0.9kg

Package size:215*155*75mm



Package list:

1x C240 battery charger

2x XT-60 plug

2x 4mm to deans charge cable

2x balance board with pin cord

2x T-Tamiya

2x T-Crocodile clip

1x AC power cable

1x DC cable

1x Manual



Please check the battery and wires, and sure they are good before charging.

• ▶Dual Model--AC/DC dual input model. Twin-channel 2 in 1 charger, charge two different kinds of batteries simultaneously. High-power and high-performance circuit. Distributable circuit power in AC model: CH1+CH2=150W. In DC model each port circuit power can reach 120W. Please don't use the AC cable and DC cable at the same time.
• ▶Multi-extra Function--1.Battery meter- display lithium battery cell counts, total voltage, battery capacity percentage,each cell's voltage. 2. Lithium battery internal resistance checking. 3.Battery balance charge. 4.Adjustable digital DC power, 5.Smart battery.
• ▶Support Batteries--Supports charging, discharging and balance charging batteries: 1-6s LiPo LiFe LiHV Lilon,1-15s NiCd/NiMH, 2-20V PB and smart battery. Automatic identification of lithium batteries cells counts.Support multiple charging models. Please choose the right type of battery when charge.
• ▶Terminal Voltage Control--This battery charger is allowed to set the charge/discharge voltage. Full plastic shell, safe, compact, beautiful. The built-in cooling fan comes with a power switch. This battery charger's shell is made of fire-proof material.
• ▶Max Safety--Low input voltage limit, automatic charge current limit, Delta-peak sensitivity, capacity limit, processing time limit,temperature threshold. Data storage and loading: 20 memory data each channel. Support firmware upgrade. Note: This rc charger is sold by AorikaBeauty.

User questions & answers

Question:	Can i charge a battery with ic3 connector ( 3200mah / 3s /11.1v
Answer:	The Tenergy charger works fine. It takes a long time to charge economic batteries, about 6-8 hours. This is normal for chargers that are not computer controlled.
Question:	This unit will not discharge 1s batteries? they have a very small jst white plug with just two terminals. that's it, just that two wire connection
Answer:	Doubtful. This charger is 12V while the Red Spike Dinosaur appears to be 9.6V. Look at this one instead. http://www.amazon.com/Imaginext-Dinosaur-Replacement-Charger-adaptor/dp/B00AQO6QDK/ref=pd_sim_sbs_t_1
Question:	Will this charge 2 batteries both at 10 amps each at the same time? And can it charge 2 batteries of different capacities at the same time
Answer:	It's a male end, but the actual metal prongs inside are female. If the metal prongs on the battery are male, it will work. One side has a square hole and the other an arch like shape. I've uploaded a picture for you to review under "Product Images from Customers" in the review section of the page.
Question:	does this come with two sets of cables since it is a dual charger
Answer:	Sometimes when you use the incorrect voltage when charging a battery you get an explosion.

• Fast charge - NiCd/NiMH battery pack charger that provides 1Amp or 2Amp options. Quickly charge your battery packs; 1Amp is recommended for 1000-1800mAh packs, and 2Amp is recommended for any pack over 2000mAh.
• Universal smart charger - Charges battery packs based on automatic voltage detection. Charges your NiMH or NiCd battery packs that are 6V, 7.2V, 8.4V, 9.6V 10.8V, and 12V battery packs.
• Easy-to-use - A great airsoft battery charger or RC car battery charger with simple LED indicators for charging status. Green light for fully charged and red light for charging.
• Hobby battery charger - Power all your hobbies with one charger. Charge your NiMh/NiCd battery packs for Airsoft, RC Cars, and or remote controlled toys. Includes standard size Tamiya connector, standard to mini Tamiya adapter, standard Tamiya to Alligator Clips adapter.
• Tenergy safe - To give you peace of mind, Tenergy's chargers meet rigorous American UL 60950-1 safety standards. For added security, the charger also includes a temperature sensor to prevent over-heating while charging. Buy with confidence, your charger includes a 12-month warranty.

User questions & answers

Question:	what type of connectors does this have
Answer:	You will have to buy or make ends to convert to ic3 the charger does not come with ic3 plugs standard.
Question:	can this charge batteries with a mini connector
Answer:	Hi, it can discharge 1s battery.
Question:	I am getting a 12v cb radio, will i be able to hook this to the red and black (with the converter) and it will power the radio while i test it
Answer:	Yes, but it is better that you can set the parameter smaller than 10 amps, if the 10 amps is the full, because charging 10 amps in the long time, it won't be very good for your battery. And you can charge 2 different batteries at the same time, because dual battery charger.
Question:	Will this work for charging Fisher Price Spike the Ultimate Dinosaur battery pack? LH 130-2A51MC8HROT 9.6v, AA Size, 1300mAh
Answer:	Of course, it does.