12 best rc battery chargers

• 👌Fast Charging: AC DC dual input, AC: 100-240V; DC: 11-18V. High power and high performance circuit - maximum output power 150W. Charge current: 0.1-10A; Discharge current: 0.1-2A; Max discharge power: 10W. Built-in cooling fan, it also has power switch and a 5V 2.1A USB output ports. Our charger's shell is made of fire-proof material.
• 👌Supports for Many Different Batteries: 1-6s LiPo LiFe LiHV Li-ion, 1-15s NiCd/NiMH, 2-20V PB and Smart Battery I/II/III. Automatic identification of lithium batteries cells counts. Multiple charging modes: Charge, Balance Charge, Discharge, etc. When the battery is full charged, the battery charger will automatically stop charging. Tips: Please choose the right type of battery when charge. When you charge the battery, please don't use the AC power cable and DC cord at the same time.
• 👌Multi-extra Function: 1.Battery meter- display lithium battery cell counts, total voltage, battery capacity percentage, and each cell's voltage; 2. Lithium battery internal resistance checking; 3.Battery balancer; 4.Digital DC power; 5.Supports for smart battery.
• 👌Terminal Voltage Control: This Charger allows user to set the charge/discharge end voltage of the battery. For an example: lipo battery end voltage is 4.2V /cell when charing, while on this charger, the end voltage is adjustable, rangs from 3.85V to 4.3V. Warning: this feature for expert only!
• 👌Max Safety: Low input voltage limit, automatic charge current limit, Delta-peak sensitivity, capacity limit, processing time limit, temperature threshold. Data storage and loading: 20 memory data. Allow firmware to update.

User questions & answers

Question:	Will this charger, charge up my hexfly hx403 battery
Answer:	Hi, is it lipo battery or nimh battery? The charger can charge 1-6s LiPo LiFe LiHV Li-ion battery, 1-15s NiCd/NiMH battery, etc.
Question:	Are the output to battery plugs 4mm? I need to get an adapter for ec
Answer:	Yes you should.
Question:	How do i charge a lipo yuneec q500 no lead battery
Answer:	You can't - you need a charge lead to safely charge.
Question:	v or only 4.3v my batts are recommended 4.35v
Answer:	Your question is a little confusing. Are you asking about the low voltage cutout for a 4.7v cell?

• [Wide Battery Type Compatibility]-Similar to our B6 V2, just better.It has the similar function, but is lighter and more cost-effective!The balance charger with high performance microprocessor can charge and discharge a variety of batteries such as 1.2V-18V NiMH/NiCD batteries (1-15 Cells), 3.7V-22.2V LiPo/Li-ion batteries (1-6 Cells), 3.2V-19.2V LiFePO4 batteries (1-6 Cells), and 2V-20V SLA batteries.Note: Do not choose the wrong type of battery when charging.
• [Multiple Practical Functions]-The lipo charger is built in an independent Lithium Battery Balancer to monitor and balance each battery cell, and it has Fast & Storage Charging function, Data Storage & Load function, Cyclic Charging & Discharging function
• [Easy To Operate]-Press the "Batt.Type" button to the user settings or select battery type or exit the program, press the "Start" button twice to the parameters setting, press the "Dec." or "Inc." button to switch over, press and hold the "Start" button to charge battery
• [High Quality & Safe]-Using superior chip and materials to deliver quality performance, and the charger is designed with Reverse Polarity Protection, Short Circuit Protection, Over-Charge Protection, Over-Current Protection and Over-Temperature Protection for safety.The charger shell is made of high-quality fireproof materials and has passed the experimental certification, so it can be used safely.
• [What you get]-The RC car lipo balance charger comes with a AC/DC adapter, a AC cable and a set of wires for all kinds of batteries. And your charger includes a 12 month warranty.

User questions & answers

Question:	Does it have deans type connector
Answer:	This charger is honestly junk. I bought one at the local hobby shop that lasted two weeks, I brought it back there and they couldn't do anything with it. I then purchased another one on here and that one never worked.
Question:	What is the output of the ac/dc adapter that it comes with? 3-4a output
Answer:	You might want to just consider purchasing the TRA2972 Dual ID Charger: http://smile.amazon.com/gp/product/B00XWBW2BO/ref=ox_sc_act_title_1?ie=UTF8&psc=1&smid=AT08HXV5GBPUZThis charger has a manual mode that will allow you to charge ANY Brand LiPo. You simply need to have a Traxxas connector on your battery, Or a simple adapter (For Example a Deans to Traxxas Female, XT60 to Traxxas Female adapter). Your battery must also have the JST-XH style balance plug, which 95% of batteries on the market DO have. This charger has a 2S and 3S JST-XH balance port hidden under a cover on the front of the charger. This allows you to balance charge ANY brand LiPo battery.Now, to answer the question of the Parallel charging board: Yes, it will work. Your board will need the following two things though in order to be able to connect to this charger. First is a Traxxas Plug. Second, you will need a 2S or 3S Balance wire. Most parallel boards come with a 6S wire. But this charger only has a 2S and a 3S balance port. So the 6S wire will be too large. If you have those two things, you're set to use a parallel board.
Question:	I bought this to charge li-ion batteries. how do i do this? there is no li-ion charge selection
Answer:	YES, Dual Voltage!
Question:	Can this charger store and load data
Answer:	I had the same problem, have to return the unit. Pretty ridiculous.

Product features

Wide Battery Type Compatability

This RC battery balance charger with high performance microprocessor can charge and discharge a variety of batteries such as 1.2V-18V NiMH/NiCD batteries (1-15 Cells), 3.7V-22.2V LiPo/Li-ion batteries (1-6 Cells), 3.2V-19.2V LiFePO4 batteries (1-6 Cells), and 2V-20V SLA batteries

Multi Working Modes

• Cyclic Charging & Discharging: Perform 1-5 cycles continually to refresh and balance battery. The interval time between charge and discharge can be set.
• Data Storage & Load: There are 5 memories record for different batteries so you don't have to set everything again next time you charge.
• Fast & Storage Charging: Select between fast charging with current up to 6A or most efficient voltage for storing the batteries according to your needs.
• Lithium Battery Balancer: Internal cell voltage balancer built-in for LiPo,Li-ion and LiFe batteries so you don't need an extra balancer.

Multiple Protection Design

The charger is designed with Reverse Polarity Protection, Short Circuit Protection, Over-Charge Protection, Over-Current Protection and Over-Temperature Protection for maximum safety

Superior Chip

Using superior chip and materials to deliver quality performance

Standard Interfaces

The charger has standard ports for necessary connecting cables.

AC/DC adapter

It comes with a AC/DC adapter, so you don't need to buy a adapter again.

Additional Bonus

The package also includes a set of wires for all kinds of batteries.

• One charger for many battery packs - Tenergy TB6-B balance charger/discharger is ideal for all hobby battery packs that are NiMH, NiCd, LiPO, Li-ion, LiFePO4, and SLA battery packs.
• Wide connector compatibility - With one multi-charging harness, this AC balance charger is compatible with battery packs with tamiya, mini tamiya, JST, HiTec, EC3, Deans, XT60, and bare leads connectors so that additional connectors can be added.
• Works with multiple voltages - Compatible with battery packs with voltages that ranges from 6 to 12 for nickel metal hydride or nickel–cadmium battery packs and Lithium-ion battery packs with voltages from 3.7 volts to 22.2 volts (1s-6s).
• Multiple functions - More than a regular digital balance charger, Tenergy TB6-B comes with features like Li-ion and LiPO balancing, fast charging, data storage, cyclic charging, discharging, and much more for all of your battery packs.
• Easy to read screen - View all charging statuses and settings on the electronic balance charger LCD screen as you navigate the modes and selections. Buy with confidence, your charger includes Tenergy a 12-month warranty.

User questions & answers

Question:	Does this have a ec3 banana connector
Answer:	no manual for this dude plug the, part that goes in the outlet in find the size adapter and plug it in to your battery if none fit you need another type charger
Question:	Can this charge nimh packs that have a banana connector? If not, can you get me a link
Answer:	No it does not. It’s just a cheap simple thing. It doesn’t even tell u if it is fully charged or not
Question:	Can the tenergy tb6-b be used to discharge a battery in order to measure its capacity
Answer:	I'm not sure why the charger is indicating the battery is charged so soon! If I were you I'd buy a new battery! Because no battery charges in 5 minutes! Or last just 5 minutes! Buy, a new battery! I have this charger and when I charge my batteries it takes over night to charge! Hope this helps!
Question:	Can you give me an estimate how long this takes to charge batteries? Say a 7.2v 1600mAh NiMH or a 7.2v 3200mAh LiPO
Answer:	could be

Product description

RC car Battery Charger for 4.0V-9.6V NiMH/NiCd Battery Packs, 400mA Charging Current for 5-10 Cells Battery, 700mA Charging Current for 2-4 Cells Battery, AC Plug Charger w/ Standard Tamiya Connector, Mini Tamiya, JST Plug, SM Plug 2P, Barrel Plug, JR/Futaba Receiver Connector, Frsky X9D (Plus) QX7 QX7s X9E Battery Plug PH2.0 2-pin for RC Hobbies, Airsoft Battery Packs, also the barrel plug can connect to frsky x9d transmitter to charger stock battery



Charger Specifications:

Input: 100-240V AC

Output: 4-12V 400-700mA

Connector: Standard Tamiya Connector, Mini Tamiya, JST Female 2-pin Plug, SM Plug 2-Pin, Barrel Plug 5525, JR/Futaba Receiver Connector, Frsky X9D (Plus) QX7 QX7s Battery Plug PH 2.0 2-pin Applicable Battery Type: NiMH/NiCd

Compatible Battery Voltage: 4V-12.0V

Operating Temperature: 0 ~ 40°C

Storage Temperature: -20 ~ 85˚C

Dimensions: 78*45*27mm (L x W x H)

WARNING - DO NOT CHARGE LiPo Batteries



DO NOT CHARGE More than one battery at a time.

DO NOT CHARGE: if the label on your battery says: LiPO, LIPO, Li-Po, LI-PO, Li-Polymer, Li-Poly, Lithium Polymer, Li-ion, Lithium-Ion, Lithium.

Caution: LiPo battery packs may often have two sets of leads/connectors - do not charge if identified as LiPo battery. Failure to follow these warnings may result in fire or personal injury.

Contact our customer support team if you are unsure if your battery can be charged.



Package include:

1 x charger

1 x set of plug adapters (6 types)

• The 12V 400mA-700mA NiMH battery charger can charge NiMH/NiCd battery packs that are 4.8V, 6V, 7.2V, 8.4V, 9.6V 12.0v (2-8 cells). NOTE: This charger is only for recharging NiMH/NiCd batteries, do not charge LiPo batteries.
• RC Car Battery Charger for NimH NiCd battery pack from 2.4v to 12v - Cover 90% Rc Car Battery with Tamiya battery Plug, mini tamiya battery plug, JST battery plug, SM 2P battery plug, Futaba/JR Receiver Plug, Frsky X9D X9D Plus X9E QX7 QX7s Battery Plug, also barrel plug can connect to frsky x9d transmitter to charger stock battery
• AC to Dc power adapter charger with terminal barrel plug 55mm (outer diameter) x 25mm (inner diameter) can be used to charger FrSky Taranis X9DP/X9E transmitter battery and other device
• The simple LED indicators your battery charging status. Green light for fully charged and red light for charging Processing.
• ADVANCED PROTECTIONS - Charger has built-in safety protections against reverse polarity, short circuit, and over-current protection. The universal 100-240V AC input enables this charger to be used anywhere. Buy with confidence under 12-month warranty.

User questions & answers

Question:	Hello, i lost my instructions for this, can you link me a manual for this please
Answer:	Yes it can be. You will need a 50 amp breaker for a generator this size and make sure the power supply cord is rated for 50 amps also. I purchased the Conntech bundle package which includes a 15ft power cord along with the plug-in box for $169 here on Amazon along with the 50amp double pole breaker for about $20.
Question:	Does it auto sense full charge and shut off
Answer:	SC2000i has its engine made from Yamaha, SUA2000i has the engine built from less known Senci(but as reliable)
Question:	I plug charger into battery. light goes green in 10 minutes. batteries last for 5 minutes? do i need to charge longer even though charger light shows
Answer:	If I am not mistaken AI Power makes their own engines and got into the generator business in recent years.
Question:	Im replacing a charger for a rc dodge charger replica from the movie fast&furious, is this the right one
Answer:	Everything is made in China. Even my underpants

• 【NiMH/NiCD Battery Charger】The charger is professionally designed for 2-8s NiMH/NiCD battery(2.4-9.6V) of drone, RC car, RC boat, airsoft gun, etc.Smart charging, with overcharge protection, free your time.
• 【Input and Ouput】 AC input voltage:100-240V. Output power：20W, charging current: 1A/2A. Charging current can be selected with a switch on the side of the charger.
• 【Easy to Use】This charger comes with standard tamiya connector and a free charging cable with mini Tamiya, so you can charge your NiMH/NiCD battery easily. Just need to plug the AC cord and connect your battery and the charger.
• 【Two-color Indicator】Steady red light indicates that charging is in progress, steady green light indicates that charging is completed, red and green flash alternately indicates that the battery is not connected.
• 【Note】This charger is only suitable for NiMH/NiCD batteries. Please do not charge when left unattended.The charger shell is made of high-quality fireproof materials and has passed the experimental certification, so it can be used safely.

User questions & answers

Question:	Will this work with 7.2v 1800 mah nimh battery
Answer:	yes,this charger has Resistance Meter
Question:	Will this charge my 7.2V battery
Answer:	No, in this case, you should choose a charger that supports dual-channel charging, such as the C240, T240 and T400 in our store. All three chargers support charging 2 different types of batteries at the same time.
Question:	what type of connectors does this nimh charger has
Answer:	Ofc it charges any batt as long as you have it hooked up right
Question:	Will the Battery automatically turn off or just turn green saying its filled
Answer:	yes,this charger will cutoff working when the safety time is up to the setting value

Product description

Our C240 battery charger is a new design dual balance charger,which can charge two different kinds of batteries simultaneously.

Input: AC 100-240V / DC 11-18V

Charge power: AC mode 150W (CH1+CH2=150Watt),DC mode 120W*2 =240W

Discharge power:Max 10W*2

Charge current range:0.1-10A *2

Discharge current range:0.1-2A*2

Lilon/LiPo/LiFe/LiHV cell count :1-6cells*2

NiCd/NiMH battery cell count:1-15cells*2

PB Battery voltage:2-20V*2

Smart battery:I/II/III*2

Current drain for balancing: 500mA/cell

Net Weight:0.48kg

Dimension:145*105*64mm

Gross weight:0.9kg

Package size:215*155*75mm



Package list:

1x C240 battery charger

2x XT-60 plug

2x 4mm to deans charge cable

2x balance board with pin cord

2x T-Tamiya

2x T-Crocodile clip

1x AC power cable

1x DC cable

1x Manual



Please check the battery and wires, and sure they are good before charging.

• ▶Dual Model--AC/DC dual input model. Twin-channel 2 in 1 charger, charge two different kinds of batteries simultaneously. High-power and high-performance circuit. Distributable circuit power in AC model: CH1+CH2=150W. In DC model each port circuit power can reach 120W. Please don't use the AC cable and DC cable at the same time.
• ▶Multi-extra Function--1.Battery meter- display lithium battery cell counts, total voltage, battery capacity percentage,each cell's voltage. 2. Lithium battery internal resistance checking. 3.Battery balance charge. 4.Adjustable digital DC power, 5.Smart battery.
• ▶Support Batteries--Supports charging, discharging and balance charging batteries: 1-6s LiPo LiFe LiHV Lilon,1-15s NiCd/NiMH, 2-20V PB and smart battery. Automatic identification of lithium batteries cells counts.Support multiple charging models. Please choose the right type of battery when charge.
• ▶Terminal Voltage Control--This battery charger is allowed to set the charge/discharge voltage. Full plastic shell, safe, compact, beautiful. The built-in cooling fan comes with a power switch. This battery charger's shell is made of fire-proof material.
• ▶Max Safety--Low input voltage limit, automatic charge current limit, Delta-peak sensitivity, capacity limit, processing time limit,temperature threshold. Data storage and loading: 20 memory data each channel. Support firmware upgrade. Note: This rc charger is sold by AorikaBeauty.

User questions & answers

Question:	Can i charge a battery with ic3 connector ( 3200mah / 3s /11.1v
Answer:	The Tenergy charger works fine. It takes a long time to charge economic batteries, about 6-8 hours. This is normal for chargers that are not computer controlled.
Question:	This unit will not discharge 1s batteries? they have a very small jst white plug with just two terminals. that's it, just that two wire connection
Answer:	Doubtful. This charger is 12V while the Red Spike Dinosaur appears to be 9.6V. Look at this one instead. http://www.amazon.com/Imaginext-Dinosaur-Replacement-Charger-adaptor/dp/B00AQO6QDK/ref=pd_sim_sbs_t_1
Question:	Will this charge 2 batteries both at 10 amps each at the same time? And can it charge 2 batteries of different capacities at the same time
Answer:	It's a male end, but the actual metal prongs inside are female. If the metal prongs on the battery are male, it will work. One side has a square hole and the other an arch like shape. I've uploaded a picture for you to review under "Product Images from Customers" in the review section of the page.
Question:	does this come with two sets of cables since it is a dual charger
Answer:	Sometimes when you use the incorrect voltage when charging a battery you get an explosion.

• Battery Variety Charging: The battery charger can support many kind of batteries;Use with LiPO, Li-ion, LiFePO4, NiMH, NiCd,and SLA battery packs.
• Wide Voltage Compatibility: Use the battery pack balance charger on LiPo: 1-6 cell; NiMH: 1-15cell; NiCd: 1-15 cell; Li-ion: 1-6 cell; PB: 2-20V; LiFe: 1-6 cell; LiHv: 1-6 cell; Smart Battery: I,II,III. So it is very useful.
• Multiple Functions: Except charge, balance and discharge,this charger comes with features like Li-ion and LiPo balancing, fast charging, data storage, cyclic charging and discharging and much more for all of your battery packs;Terminal Voltage Control; Lithium Battery Capacity & Voltage Checking;
• Easy to Read: View all charging statuses and settings on the electronic balance charger LCD screen as you navigate the modes and selections.The charger shell is made of high-quality fireproof materials and has passed the experimental certification, so it can be used safely.
• What You Can Get--1×battery charger; 1×adapter; 1×AC power cable; 1×DC crocodile clip; 1×octopus multi-charging harness; 1×battery protective bag; 1×manual.

User questions & answers

Question:	Can this charge at .5 amps? My batteries are 450mah and a safe charge would be at .5A can this charger do that
Answer:	No xt90 connector can get one on Amazon for $6
Question:	Does this come with dean connectors
Answer:	yes it will , i have a ASSOCIATED 738 WolfPack LiPo 2S 7.4V 3800mAh 25C Shorty ASCC0739 .It will also charge the Team Associated 317 Reedy LiPo 5200mAh Square 7.4V 50C Competition Battery and any battery from there on down.
Question:	Does it come with an xt30 connector
Answer:	This is a $10-15 dollar item. When sold at this price range the seller makes 20-30% profit on the product. Now if you buy this same item for $60 your giving your hard earned cash away. I purchased 5 of these from the same factory directly from China 10-12 yrs ago. I see this item now being sold for an absurd price. How is this possible? So long as it sells do you think Amazon cares or the seller. If the buyer has no clue that a design is simply being repacked and labeled and praised as amazing that person unaware will buy. Now people if your lucky enough to be reading this look elsewhere and best wishes. I had to write this not to mess with Tenergy's bottom line but the markup is to extreme and I'm watching buyers flood in unaware or unknowing what there buying. This is a wide spread problem that I'm watching on Amazon not specific to this product. Great for sellers but buyers are getting hosed thinking they are getting a deal as they buy on trusted amazon for a good online deal yet they are now paying for many items a 50% markup. Good luck to you my friend. Where safety is concerned if your buying this item and are unaware then you need to buy an actual charger that has you best intentions at the price point $60 ^.
Question:	Will this ship to Alaska
Answer:	This charger's max charge rate is listed at 5.0 A (5000mA). From here you just do the math... mAh = milliAmphours. If your battery is a 1600mAh capacity, that means you can run an electronic device drawing 1600mAh for 1 hour before your battery is exhausted. The same thing applies to charging. If you want to charge your 1600mAh battery at the 5000mA rate, it would be 1600/5000 = 0.32 * 60 minutes = 19.2 minutes total charging time.For your 3200mAh battery, it would be 38.4 minutes.Hope that helps!

• [Universal Voltage Compatibility]- the battery balance charger support LiPo/Li-ion 3.7V-22.2V (1S-6S), with voltage capabilities such as 7.4V, 11.1V, 14.8V. LiFePO4 3.2V-19.2V (1S-6S), with popular options of 9.6V, 12.8V, 16V. LiHV 3.8V-22.8V(1S-6S). NiMH/NiCd 1.2V-18V (1S-15S), with popular options of 6V, 7.2V, 9.6V, 12V. PB 2-20V (1-10 Cells) and smart battery.Note: Do not choose the wrong type of battery when charging.
• [Multiple Functions]: Compare to a regular digital balance charger,C150 Battery Charger comes with features like Li-ion and LiPO balance charging, fast charging, data storage, battery meter, NiMH cyclic charging and discharging and much more for all of your battery packs
• [Terminal Voltage Control]- This Charger allows user to set the charge/discharge end voltage of the battery. For example:lipo battery end voltage is 4.2V /cell when charing, while on this charger, the end voltage is adjustable, rangs from 3.85v to 4.3v. Warning: this features for expert only!
• [Smart Protection]:Low input voltage limit, automatic charge current limit, Delta-peak sensitivity, capacity limit, processing time limit,temperature threshold. Data storage and loading: 20 memory data. Firmware update
• [What You Get] - The AC/DC balance charger comes with AC Power Cord,DC Cable,Balance Board,Explosion Proof Bag .Package also comes with octopus multi-charging harness with TAMIYA, TAMIYA mini, JST, T Plug, EC3,TRX,Deans connectors to be compatible with many charging connectors

User questions & answers

Question:	Can it check battery resistance
Answer:	Yes ,B6 V2 can , the max charger current is 600 mah . You can use it to charge your battery with confidence.
Question:	Can I use this with a multiple battery charging/balance plate to charge/balance two lipo batteries at the same time? If so which board should I buy
Answer:	Yes,it come with dean connectors.
Question:	Well this charge my traxxas lipo 3s battery
Answer:	no ,it comes with T plug,TRX,TAMTYA,TAMIYA MINI,FUTABA,XT60,JST,EC3...
Question:	Does it auto switch off when the battery is full
Answer:	I am so sorry ,it can not ship to Alaska.

Product features

Please Connect the Charger and Battery Correctly in the Order of Connection Before Starting Charging

1.About the positive electrode electrode and negative electrode interfaces,you need to connect correctly,otherwise,it will fail to charge.

2.About the connectors,you need to connect correctly,otherwise,it will fail to charge.

3.If you choose the balance mode ,about the balance ports,you need to connect correctly,otherwise,it will fail to charge.

4.After setting ,press the "ENTER" button for 3 seconds,then you can charge the battery.

Wide Voltage Available

Supported NiMh NiCd rechargeable batteries from 1.2v - 1.8v (1-15S), Lipo Li-ion rechargeable batteries from 3.7V to 22.2V (1-6S), lifepo4 rechargeable from 3.2v to 19.2V (1-6S), SLA rechargealbe batteries from 2V- 20V,and smart batteries Ⅰ、Ⅱ、Ⅲ.

Superior Safety

C150 Balance Charger adopted high tech support 100% safe charging with advanced over-current, over-discharge, over-voltage and short-circuit protection for your battery pack

Multi-working modes

C150 lipo charger with multi-woking modes:Fast charge,Balance charge,discharge,circle node,storage mode

Product description

The next evolution of the Venoms successful line of Pro chargers is here with the Venom Pro Duo dual 7.0A balance charger. Featuring a monolithic vertical stance, this charger saves valuable bench space by providing two complete charging circuits, each with its own dedicated 80W integrated power supply in a footprint equal to most single charger solutions. Having two dedicated power supplies in one compact package means both channels are able to receive 80W of power, ensuring you are not diluting your amp rate when charging a second pack. As an added bonus, you will not need to haul that separate power supply out to the track anymore. Menu navigation is easy using the five-button control interface and brightly backlit LCD screen. All the most common battery chemistries are supported: LiPo, LiHV LiFe, Li-Ion, NiMH, NiCD, and Pb (lead acid) with a complete assortment of charge leads included in the box with two extra long balance leads to make safe charging in a LiPo sack effortless. Get ready to upgrade to the newest addition to the Venom family of chargers, get your Venom Pro Duo 7.0A LiPo & NiMH charger today!Venom Limited Lifetime Warranty

We are certain of the quality of all Venom products. Therefore, all Venom products come with our Limited Lifetime Warranty, which covers defects in materials or workmanship for the life of the product. Venom will repair or, in its discretion, replace defective product free of charge for a period of 1 year from the original date of purchase. After that, for any defective product you will receive a credit equal to thirty percent (30%) of retail price (as shown on venompower.com) toward the purchase of a new Venom product of the same size and type. We reserve the right to substitute different sizes or types of replacement product for product sizes or types that have been discontinued.This is a non-transferable warranty and does not cover normal wear and tear, physical damage

• NOT YOUR AVERAGE BATTERY CHARGER | This isn’t your ordinary charger, it is a Venom Pro Duo Charger. It's easy to operate and comes fully loaded with features that balance charges individual cells of several types of battery fast and safe. Now, charging and balancing your RC batteries is no longer a worry. This battery charger comes complete with Charger, Bundle of Charge Leads (1 per type), 2 Balance Blocks, AC Power Cable, DC Power Cable, and Instruction Manual.
• BALANCE CHARGES ALL TYPES OF BATTERIES | The Venom Pro is a multi-chemistry battery charger for Lithium - LiPo, LiHV, Li-Ion and Lithium Iron LiFe, Nickel Metal Hydride NiMH, Nickel Cadmium NiCD, and Lead Acid Pb based chemistry batteries. This LiPo charger includes one of each of the following charge lead adapter types: Alligator, Deans, EC3, EC5, JST, Receiver (RX), Tamiya, and XT60.
• EASY TO USE, QUICK AND SAFE BALANCE CHARGING / DISCHARGING | Charging your 1S, 2S, 3S, 4S, 5S, or 6S LiPo batteries and other battery types has never been safer and easier. Two independent and dedicated charging circuits at 80 Watts each, totaling 160 Watts of power, reach a safe voltage to balance charge batteries again and again. Use it to charge your LiPo batteries fast and get back to racing.
• LOADED WITH ADVANCED FEATURES AND FUNCTIONS | Functions include Charge, Balance Charge, Fast Charge, Storage Charge, Discharge, Cycling, and Battery Meter. You can also save up to 5 battery profiles for rapid recall. It has an Input Voltage of 100V-240V AC, or 11.0V - 18.0V DC for use on the go or in the field. The Pro Duo's lightweight frame comes in at under 2 lbs. (.90 Kg) and its integrated carry handle makes it easy to transport.

User questions & answers

Question:	Will this charge lipo 3250 8s 29.6v battery pack if not what will
Answer:	Unfortunately not, 6S max. Off hand I'm not sure of a model that can charge 8S. I'm sure they exist but why not just go 2 4S?
Question:	Do I have to buy extra connections to charge 2 6s lioo batteries
Answer:	No. I have plenty of 6s lipo batteries that I charge at the same time. Everything is included in the box. This is a great charger.
Question:	With this unit, how long will it take to charge a 3s 5000Mah LiPo from empty to full on the regular charge rate
Answer:	It takes about about 45 minutes to an hour. My 7200 mah 3s batteries usually take an hour and a half to charge. And that's on a balance charge.
Question:	Will this charger work reaction lipo 2s 30c 350mah batteries w/ 3 pin jst plug
Answer:	Did you even read the description before asking this??? Seriously bro it says right above the picture of the thing " LiPo Balance Charger Discharger with Charger Adapter | LiPo 1S to 6S" --- so YES it will charge your 2s LiPo battery- and YES you 3 pin balance plug will fit just fine in the provided balance plug connection. Go back to the product picture of the rectangle thing and it will show 5 size balance adapter.

Product features

Venom Pro Duo Dual 7.0A Balance Charger

The next evolution of the Venoms successful line of Pro chargers is here with the Venom Pro Duo dual 7.0A balance charger.

Featuring a monolithic vertical stance, this charger saves valuable bench space by providing two complete charging circuits, each with its own dedicated 80W integrated power supply in a footprint equal to most single charger solutions.

Product description

Spektrum Smart S150 AC/DC RC Battery Charger (LiPo, LiIon, LiHV, NiMH), 1x50W: SPMXC1070

• Compact 50 watt charger with advanced Smart charging capabilities and simple, entry-level platform
• Recognizes unique Smart battery data for safe, easy charging - but also charges LiPo, Li-Ion, LiHV and NiMH RC batteries without Smart technology
• Quiet internal cooling fan maintains a safe, efficient operating temperature
• One-button interface and easy to read charging indicator
• INCLUDES: Spektrum S150 AC Mini Smart Charger and AC to 20V DC 3 Amp Power Supply

User questions & answers

Question:	Will this change 6s lippo batteries
Answer:	No it only goes to 4s
Question:	Will this work connected to a 12 volt battery to use as a field charger? the input says 19-24 volts
Answer:	I'm sure it will if you have the correct power adapter it comes with the 120 volt to DC adapter
Question:	does it have a storage charge program
Answer:	Nope.
Question:	Is this a ic5 charger or need a connector
Answer:	This has an IC3 jack, so you would need an IC5 adapter.

Product description

The Traxxas iD battery system is the easiest and safest way to charge your Traxxas batteries. The EZ-Peak Plus recognizes Traxxas iD batteries and in an instant automatically configures and optimizes the charger settings. There's no need to be a battery expert or learn how to navigate complex menus. Just plug in a Traxxas iD battery and EZ-Peak Plus (#2970) does all the work for you. The integrated balance connector on Traxxas LiPo iD batteries eliminates fragile balance wires and connectors, along with the need for external balance boards. At the press of a button, the EZ-Peak Plus' Storage Mode protects your LiPo battery investment by safely preparing the batteries for extended storage. 4-amp fast charging and advanced high-resolution peak detection deliver a perfect charge every time. The EZ-Peak Plus is backed by the Traxxas Lifetime Electronics Warranty for years of reliable service.

• Charger recognizes Traxxas iD batteries to automatically program and optimize charger settings. Charges 5-8-cell NiMH batteries and 2S and 3S LiPO batteries
• One button LiPO storage charge protects your battery investment and advanced high-resolution peak detection delivers a perfect charge
• Easy to use interface with charge progress indicator and integrated cooling fan
• Advanced Mode for full manual control of charger settings and integrated balance ports for conventional LiPO batteries
• Refer user manual for troubleshooting steps

User questions & answers

Question:	will this battery work with 1/10 e-revo
Answer:	Yes,this nimh charger can charge 7.2v 1800 mah nimh battery
Question:	Can I use a parallel wire harness with this and charge two lipos at once
Answer:	sure,it can charge your 7.2v nimh battery
Question:	Is this dual voltage ? 110V-220/240V
Answer:	This charger has standard tamiya connector ,mini Tamiya connector
Question:	I plug mine in with no battery connected, nothing happens. With the battery connected, nothing happens. Do you believe my unit is defective
Answer:	The green indicator light indicates that the battery is fully charged.

Product features

A Traxxas-Exclusive Innovation

Traxxas iD-equipped chargers are the only way to take full advantage of your iD-equipped batteries. The Traxxas iD battery system is the easier and safer way to charge your Traxxas batteries.

The Traxxas 2970 EZ-Peak charger instantly recognizes Traxxas iD batteries and automatically configures the charger settings for you. There's no need to be a battery expert or learn how to navigate complex menus. The Traxxas iD system helps to eliminate costly charging errors by removing the guesswork. Just plug in a Traxxas iD battery and EZ-Peak Plus does the rest. Battery charging is easier and safer than ever before.

One Button Simplicity

Other chargers require you remember formulas and battery-specific data to avoid costly battery damage. With the Traxxas iD system, all you do is plug in your iD-equipped battery and press the start button. The charger automatically detects which battery you are using and performs all necessary calculations instantly.

Multi-Chemistry Charging

The EZ-Peak Plus charges both NiMH and LiPo batteries. Charge 5-8 NiMH batteries or 2-cell or 3-cell LiPo batteries without the hassles of conventional chargers.

Three Charge Modes

The Traxxas 2970 charger features three charge modes for your LiPo batteries. Choose Storage Mode to protect your LiPo battery investment by properly setting up your batteries for extended storage periods. Choose Balance Mode to balance your LiPo batteries' individual cells or Fast Mode when time is limited.

LED Progress Bar

The easy-to-use progress bar keeps you informed on your battery's charging status. Just plug in your iD-equipped battery and press the start button. When the charge status light turns green, you're finished. Nothing could be easier.

Legacy Battery Support

Charge your non-iD equipped Traxxas batteries with ease. The EZ-Peak Plus features a port on the front for older Traxxas LiPo batteries with separate balance connectors. A separate Advanced Mode allows you to configure the charger manually. The 2970 charger is the only charger you will ever need.

Traxxas Customer Support

When you buy a Traxxas, you become part of the Traxxas family. Our customer support team is here to help you every step of the way. Call on weekdays from 8:30am to 9:00pm Central Time to speak to a friendly R/C expert. We also offer support anytime on our website or via email. Traxxas models are about experiencing total performance and satisfaction, not just in the products, but also with the company that stands behind them.

Quick Features On Ez-Peak Plus (#2970) Charger

• Easy to Operate-The dual lipo charger with the touch screen, it is very easy for you to operate the lipo battery charger.you can charge 2 different types of batteries simultaneously with different voltages.
• Multi-chemistry lipo charger- This Touch Screen dual rc lipo charger supports varieties of batteries: 1-6s LiIon/LiPo/LiFe/LiHV;1-15cell NiCd/NiMH; 2-20V PB battery; Smart Battery I,II,III 5-27V,0.1-6A.(When the battery is full charged, the battery charger will automatically stop charging. Tips: Please choose the right type of battery when charging.)
• Multi-Modes balance charger--This rc lipo battery charger is allowed to set the charge/discharge voltage. Full plastic shell, safe, compact, beautiful. The built-in cooling fan comes with a power switch. It also has small size, it is very portable, you can take it everywhere you want, such as model airplane competition , RC competition, etc
• Multi-functional lipo charger--Low input voltage limit, automatic charge current limit, Delta-peak sensitivity, capacity limit, processing time limit,temperature threshold. Data storage and loading: 20 memory data each channel. Support firmware upgrade.The charger shell is made of high-quality fireproof materials and has passed the experimental certification, so it can be used safely.
• Package-1* T240 charger, 2* Charge cable banana plug to T-Plug, 2* Extension charge cable T-Plug to XT60, 2* balance board with pin cord, 1* AC cord, 1* DC cord, 1* user's manual. Everything you need is right here in this package!

User questions & answers

Question:	Compatible with the intelligent batteries for the dji mavic 2 pro
Answer:	Thanks for your questions. One side is normal, the other side is 10x magnified. Great for overall makeup and partial enlarged makeup.
Question:	There seems to be no adapter in the package
Answer:	It uses batteries or plugs in. You can use rechargeable batteries but have to charge batteries separately.
Question:	Its large 3.2-inch color screen, besides being touch sensitive, does it have other functions
Answer:	Thanks for your question. It is about14" from top to bottom. It is ergonomic and ideal for placement on a make-up table.
Question:	Will it work for a traxxas x-maxx 4x4 6s with lipo batteries
Answer:	We received a lot of feedback from our customers saying that our mirrors are the least distorted. 10 times magnification, but no distortion. Please feel free to buy.

Product features

Please Connect the Charger and Battery Correctly in the Order of Connection Before Starting Charging

1.About the positive electrode electrode and negative electrode interfaces,you need to connect correctly,otherwise,it will fail to charge.

2.About the connectors,you need to connect correctly,otherwise,it will fail to charge.

3.If you choose the balance mode ,about the balance ports,you need to connect correctly,otherwise,it will fail to charge.

Settings interface

In this interface, public parameters can be set, including buzzer volume, low voltage input limit, balance speed, and power distribution. You can also set channel 1 and channel 2 independently of each other, including temperature threshold, capacity threshold, and processing time threshold. Use "RESET" to restore the default settings.

Storage data interface

Here you can select the 6 commonly used settings saved during charging to quickly start charging or discharging, and you can also modify the settings.

MONITOR ：

The "MONITOR" interface can display the voltage and capacity percentage of each cell of the lithium battery as a bar graph. You can also perform internal resistance detection and battery cell balance to always know the state of the battery and maintain its healthy state.

Calibration interface

This function can calibrate the voltage of each cell of the lithium battery（only suitable for 6-cell lithium batteries）.