12 best lipoly chargers
A lipoly charger, also known as a LiPo charger, is a specialized device used to charge lithium-polymer (LiPo) batteries commonly found in various remote-controlled (RC) vehicles and devices. These chargers are crucial for maintaining the performance and safety of LiPo batteries, which are popular in the RC hobby world. Here are some key points about lipoly chargers:
Compatibility: Lipoly chargers are designed specifically for LiPo batteries. LiPo batteries are widely used in RC cars, drones, airplanes, boats, and other remote-controlled vehicles and devices due to their high energy density.
Voltage and Cell Count: LiPo batteries come in various configurations, denoted by the number of cells (S) they have. Lipoly chargers are capable of charging batteries with different cell counts, such as 2S (two cells), 3S (three cells), and so on. It's essential to match the charger with the correct battery voltage.
Balance Charging: LiPo batteries require balanced charging to ensure that all cells within the battery pack are charged equally.Lipoly chargers often feature balance ports and support for balance charging, which helps prevent overcharging or undercharging individual cells.
Charge Rate and Capacity: Lipoly chargers allow users to select the charge rate, which is the rate at which the battery is charged. This rate is typically measured in amps (A) and should be set according to the battery's capacity (measured in milliampere-hours, mAh) and manufacturer's recommendations.
Safety Features: Many lipoly chargers incorporate safety features such as overcharge protection, overcurrent protection, and temperature monitoring to prevent accidents and damage to both the battery and the charger.
LCD Displays: Advanced lipoly chargers often come equipped with LCD displays that provide real-time information on the charging process, including voltage, current, and capacity.
Portable Chargers: Some lipoly chargers are designed to be portable, allowing RC enthusiasts to charge their batteries in the field using a portable power source, like a car battery or a generator.
Multi-Charging: High-end lipoly chargers may support multiple charging ports, enabling users to charge multiple LiPo batteries simultaneously. This feature can be a time-saver for those with multiple RC vehicles.
Software and Firmware Updates: Some lipoly chargers offer the ability to update their software or firmware, allowing users to access new features or improvements over time.
Storage Mode: Lipoly chargers often include a storage mode, which charges or discharges the battery to a safe voltage level for long-term storage, helping to prolong the battery's lifespan.
It's crucial to use a lipoly charger that is compatible with your LiPo batteries and follow safety guidelines when charging these batteries, as mishandling LiPo batteries can lead to fire or other safety hazards. Proper care and maintenance of LiPo batteries and the use of a suitable lipoly charger are essential for the safety and longevity of your RC devices.
Below you can find our editor's choice of the best lipoly chargers on the market
Adafruit Micro Lipo w/MicroUSB Jack - USB LiIon/LiPoly charger - v1 [ADA1904]
Adafruit
Product description
Adafruit Micro Lipo w/MicroUSB Jack - USB LiIon/LiPoly charger - v1 Adafruit Product ID: 1904. Battery not included.
- Battery not included
- For use with Adafruit LiPoly/LiIon batteries only. Other batteries may have different voltage, chemistry, polarity or pinout. Lipo/Lipoly/LiIon Batteries not included
- Comes assembled and tested with a JST cable, 5V input via Micro-B USB connector, For charging single Lithium Ion/Lithium Polymer 3.7/4.2v batteries (not for older 3.6/4.1v cells), 100mA charge current, adjustable to 500mA by soldering a jumper closed
- Dimensions: 21mm x 19mm x 2mm / 0.8" x 0.75" x 0.08"
User questions & answers
| Question: | Can someone please verify that this uses the mcp73831 component? it looks like it but i just want to be sure |
| Answer: | This rc toy tank is painted. If you would like to paint again, I think it is ok. Thank you for your question. |
| Question: | Can I use this to charge a 10,8V 6600mah battery? Thanks |
| Answer: | No. this RC tank does not come with batteries. Thank you for your question. |
| Question: | What led colors are illuminated to let you know your battery is fully charged up |
| Answer: | No, can not do like this because it will be fulfilled by Amazon who can not select them for you. |
| Question: | I tried plugging in a lipo battery with 2500 mAh capacity and the board immediately got so hot I could not handle it, what is the issue here |
| Answer: | Yes. To be honest I don't remember if they are AAA or AA. My boyfriend put all the batteries in the Christmas toys. However I do know the tank charges off the remote or to save battery life of the remote control you can charge the tank using a usb cable and your computer. I think the usb cable was included. There were several remote control toys between my grandchildren so I'm not 100% sure if it was included or not. |
Tenergy TN267 1-4 Cells Li-Po/Li-Fe Balance Charger for Airsoft & RC Car Battery Packs with 1S to 4S XH Type Balance Connector
Tenergy
- Hobby balance charger - Power many your hobbies with one Tenergy TN267 RC balance charger. Automatically ensure 1S to 4S Li-Po/Li-Fe cells are fully balance charged for airsoft guns, RC cars, RC helicopters, and RC quadcopters.
- Compact and user friendly - The simple LED indicators on this airsoft battery charger quickly alerts you to the battery status. Use this lightweight and compact charger anywhere with the worldwide voltage 100V-240V external AC adapter.
- Wide voltage compatibility - Choose between Li-Po and Li-Fe with a switch, and use this battery pack balance charger to recharge 1-4 cells on LiPo/Li-ion 3.7V-14.8V or LiFePO4 3.2V-12.8V batteries.
- Safety protections -TN267 LiPo battery charger has built-in safety protections against reverse polarity, short circuit, over-charge, and over-current protection.
- Tenergy warranty - Buy with confidence, Tenergy 11.1V battery charger for Airsoft includes a 12-month warranty. This charger has been certified based on international CE safety standards and the adapter includes UL certification.
User questions & answers
| Question: | Does thw charger indicates when the battery is fully charged |
| Answer: | Yep, you will get a light when each individual cell is charged, when they're all green you're ready to go. |
| Question: | Will it run off a 12v dc power supply |
| Answer: | Uae the dc adapter it comes with for best results. |
| Question: | Can it charge a 11.1v 2200mah 20c lipo battery and if it can how long would it take |
| Answer: | Yes, as long as the battery has a balancing plug, as most I have seen have. The charge rate is 1 amp (1000ma), so it will take 2.2 hours or less depending upon how much charge is left in the battery. If battery is half discharged, it will take approximately 1.1 hours to charge completely. |
| Question: | Is this a smart charger will it prevent overcharging |
| Answer: | Yes, it will prevent overcharging. Mine works great. I've used it about 20 times with a 3s 4000mah zippy lipo. |
Adafruit 259 , USB Li-Ion/LiPoly Charger, v1.2
Adafruit
Product description
This is a lithium ion and lithium polymer battery charger based on the MCP73833. It uses a USB mini-b for connection to any computer or 'USB wall adapter'. charging is done in three stages: first a preconditioning charge, then a constant-current fast charge and finally a constant-voltage trickle charge to keep the battery topped-up. The fast-charge current is 500MA by default, but is easily adjustable from 100MA up to 1000MA by soldering a through-hole resistor on-board. This board is great for DIY projects because it has 3 indicator LEDs - one for power, one for charging status and a third that indicates when charging is complete. You may also keep the battery connected to the charger and pass power through the additional jst connector using the included cable.
User questions & answers
| Question: | Will this work with a 3.7volt 2000mAh 7.4Wh Li-ion battery |
| Answer: | https://learn.adafruit.com/adafruit-microlipo-and-minilipo-battery-chargers/downloads Yes it does. |
| Question: | What is the STR 2-1 input for |
| Answer: | No this is meant for a 3.7 V battery. |
| Question: | On the board there are solder points for a dc in, does this mean i can connect another method of charging to the board such as qi charging |
| Answer: | Oh so handy, this little lipo charger is so small and easy to use you can keep it on your desk or mount it easily into any project! Simply plug it via any MicroUSB cable into a USB port and a 3.7V/4.2V lithium polymer or lithium ion rechargeable battery into the JST plug on the other end. There are two LEDs - one red and one green. While charging, the red LED is lit. When the battery is fully charged and ready for use, the green LED turns on. Seriously, it could not get more easy. |
| Question: | What do i solder to adjust from 500 to 1000 mAh |
| Answer: | Double check the polarity of the battery terminals. Not all manufacturers put the + and - on the same pins. |
HTRC LiPo Charger 2S-3S Balance Battery Charger 7.4-11.1V RC B3AC Pro Compact Charger(White)
- ★ Parameter: 2S & 3S charger, AC100-240V input, max charge current: 3*1000mA. Our charger's shell is made of fire-proof material.
- ★ Each cell is charged by independent line, which make sure each battery's cell is always fully charged, extending battery's life. Note: This balance compact charger is suitable for LiPo Battery ONLY.
- ★ LED to indicate: Double color LED can display the process of charging (RED: charging; GREEN: full).
- ★ This charger is compact and light, especially there is separated corresponding balance port for each battery pack.
- ★ What You can Get: Thank you for choosing HTRC balance charger, you can get a balance charger, an AC cable, a manual, and a color box.
User questions & answers
| Question: | Can this charge a 9.6v lipo battery |
| Answer: | Sorry, it only can charge 7.4V and 11.1V lipo battery. |
| Question: | Can it charge Flouren 2S batteries |
| Answer: | If your battery is 2s lipo battery, it can. |
| Question: | Is it suitable or good and safe for goldbat 2s 5200mah 7.4v 80c lipo rc battery hard case |
| Answer: | No, it will charge too slow, and will not be good for the life of this battery charging so slow. |
| Question: | I see a black charger that looks same, also , Is the white charger a newer improved model |
| Answer: | Honestly? ALL the chargers that look like this, regardless of color or "brand name" are literally the same thing. One manufacturer makes it and 3rd party vendors brand them. Much like Car Batteries, 80% of all car batteries are made by deka and the only difference is the 3rd party sticker on it lol. |
Adafruit Micro Lipo - USB LiIon/LiPoly Charger [ADA1304]
Adafruit
Product description
Oh so adorable, this is the tiniest little lipo charger, so handy you can keep it any project box! Its also easy to use. Simply plug in the gold plated contacts into any USB port and a 3.7V/4.2V lithium polymer or lithium ion rechargeable battery into the JST plug on the other end. There are two LEDs - one red and one green. While charging, the red LED is lit. When the battery is fully charged and ready for use, the green LED turns on. Seriously, it could not get more easy.
User questions & answers
| Question: | Can this be used to power a raspberry pi zero |
| Answer: | Did you mean STAT 2 1 ? These stands for the two Charge Status outputs. |
| Question: | jst" encompasses a lot of different connectors. does this unit have a jst-sh connector. i.e. 1mm contact spacing |
| Answer: | Yes, one would use the USB port for the charger to plug in, the port labled 'BATT' would connect to the battery needing charging and the port labled 'LOAD' connects to the device needing to be powered. |
| Question: | Looking for something that can charge a 3cell lipo and still fit in a project box |
| Answer: | The max charge rate of the USB charger is about 1000 mA. To achieve this charge rate, you can either solder a 2.0K resistor on top of R4 (default 2K) - this will make the total parallel resistance 1.0K or you can remove R4 by desoldering it or cutting the trace to it and solder a 1.0K resistor in its place. The max charge rate of the USB/DC charger is about 1200 mA. To achieve this charge rate, you should solder a wire (short) on top of RPROG (default 4.7K). You can also change the rate to a different value by either soldering a resistor on top of RPROG (and calculating the parallel resistance) or removing the resistor and soldering a different one in its place. See the schematic for what values result in what charge rates. Important Note! Never charge a battery faster than 1C (so a 1300mAh battery should be charged at under 1300 mA) and we suggest staying at or below 0.5C Check the datasheet of the battery for more information about your cell https://learn.adafruit.com/li-ion-and-lipoly-batteries/proper-charging |
Tenergy TB6-B Balance Charger Discharger 1S-6S Digital Battery Pack Charger for NiMH/NiCD/Li-PO/Li-Fe Packs LCD Hobby Battery Charger w/ Tamiya/JST/EC3/HiTec/Deans Connectors + Power Supply 01435
- One charger for many battery packs - Tenergy TB6-B balance charger/discharger is ideal for all hobby battery packs that are NiMH, NiCd, LiPO, Li-ion, LiFePO4, and SLA battery packs.
- Wide connector compatibility - With one multi-charging harness, this AC balance charger is compatible with battery packs with tamiya, mini tamiya, JST, HiTec, EC3, Deans, XT60, and bare leads connectors so that additional connectors can be added.
- Works with multiple voltages - Compatible with battery packs with voltages that ranges from 6 to 12 for nickel metal hydride or nickel–cadmium battery packs and Lithium-ion battery packs with voltages from 3.7 volts to 22.2 volts (1s-6s).
- Multiple functions - More than a regular digital balance charger, Tenergy TB6-B comes with features like Li-ion and LiPO balancing, fast charging, data storage, cyclic charging, discharging, and much more for all of your battery packs.
- Easy to read screen - View all charging statuses and settings on the electronic balance charger LCD screen as you navigate the modes and selections. Buy with confidence, your charger includes Tenergy a 12-month warranty.
User questions & answers
| Question: | Does this have a ec3 banana connector |
| Answer: | no manual for this dude plug the, part that goes in the outlet in find the size adapter and plug it in to your battery if none fit you need another type charger |
| Question: | Can this charge nimh packs that have a banana connector? If not, can you get me a link |
| Answer: | No it does not. It’s just a cheap simple thing. It doesn’t even tell u if it is fully charged or not |
| Question: | Can the tenergy tb6-b be used to discharge a battery in order to measure its capacity |
| Answer: | I'm not sure why the charger is indicating the battery is charged so soon! If I were you I'd buy a new battery! Because no battery charges in 5 minutes! Or last just 5 minutes! Buy, a new battery! I have this charger and when I charge my batteries it takes over night to charge! Hope this helps! |
| Question: | Can you give me an estimate how long this takes to charge batteries? Say a 7.2v 1600mAh NiMH or a 7.2v 3200mAh LiPO |
| Answer: | could be |
Tenergy Smart Charger for 8.4V-9.6V NiMH Battery Packs, NiMH Battery Charger for Airsoft Guns, RC Cars, RC Airplanes with Mini Tamiya/Standard Tamiya Connector
- Compact charger - A smart battery charger for NiMH battery packs of 8.4V-9.6V(7-8 cells) and capacity range of 600mAh-2500mAh. NOTE: This charger is only for recharging NiMH batteries, do not charge LiPo batteries.
- Hobby battery charger - Power many hobbies with one charger. Charge NiMH 8.4V-9.6V battery packs for your airsoft guns, RC cars, and or remote controlled toys. Includes a mini Tamiya connector, mini to standard Tamiya adapter.
- Easy-to-use - The LED indicators helps you quickly determine your battery status; green light for fully charged and red light for charging. This airsoft battery charger can activate over-discharged cells, detect malfunctions, and bad batteries.
- Advanced protections - This RC battery charger has built-in safety protections against reverse polarity, short circuit, and over-charge. It will also automatically stop charging when the battery pack is fully charged through Delta Peak detection.
- Tenergy warranty - The universal 100-240V AC input enables this charger to be used anywhere. Buy with confidence, this Ni-MH rechargeable battery charger features CE, UL certification and also includes 12-month warranty.
User questions & answers
| Question: | This will stoop charging when it’s done or will it keep going |
| Answer: | It will automatically stop charging when it is fully charged,which is why it is called a "smart charger ". |
| Question: | Will it work on a 9.6 volt battery for a airsoft gun |
| Answer: | The one my son used for airsoft gun too |
| Question: | will it work on a 9.2 battery |
| Answer: | Only if it fits the chemical NiMH. 9.2 seems not to be NiMH. 7.2 8.4 9.6 (1.2 steps) |
| Question: | How long does it take to charge a 9.6v battery |
| Answer: | For me it was 3 hours+ but that is typical standard for a battery of higher voltage and the charger still works like a charm, if you're worried about it just charge it overnight. |
Adafruit Mini Lipo w/Mini-B USB Jack - USB LiIon/LiPoly Charger - v1
Adafruit
Product description
Adafruit Mini Lipo w/Mini-B USB Jack - USB LiIon/LiPoly charger - v1 Adafruit Product ID: 1905. Battery not included.
User questions & answers
| Question: | Can you output power from breakouts |
| Answer: | It is a 2-pin JST-PH |
| Question: | Can I charge a 2000 mAh battery |
| Answer: | I'd looks at something else .. its a low amperage charger and if I remember correctly, meant for single cell lipo's. Even if you could adapt it, you may be looking at long charge times. |
| Question: | Is the battery connector a jst-sh (with 1mm contact spacing |
| Answer: | Yes it will definitely work. I've used this with an Adafruit 1500mAh, 2000mAh, and 2500mAh single cell Li-ion battery with no problems. It takes a long time to charge but that's to be expected. Yellow LED indicates charging, Green LED indicates your battery is fully conditioned and charged properly. Use this with multi-cell 18650's at your own risk, it's not recommended because there is no balance charge circuit for multiple cells. It's specifically designed for Adafruit's single cell Li-ion batteries. |
Adafruit 4410 Micro Lipo Charger for LiPoly Batt with USB Type C Jack
Adafruit
Product description
Oh so handy, this little lipo charger is so small and easy to use you can keep it on your desk or mount it easily into any project! Simply plug it via any USB C cable into a USB port and a 3.7V/4.2V lithium polymer or lithium ion rechargeable battery into the JST plug on the other end. There are two LEDs - one red and one green. While charging, the red LED is lit. When the battery is fully charged and ready for use, the green LED turns on. Seriously, it could not get more easy. For use with Adafruit LiPoly/LiIon batteries only! Other batteries may have different voltage, chemistry, polarity or pinout. Lipo/Lipoly/LiIon Batteries not included, but we've got tons in the shop. Charging is performed in three stages: first a preconditioning charge, then a constant-current fast charge and finally a constant-voltage trickle charge to keep the battery topped-up. The charge current is 100mA by default, so it will work with any size battery and USB port. If you want you can easily change it over to 500mA mode by soldering closed the jumper on the front, for when you'll only be charging batteries with 500mAh size or larger.
- Comes assembled and ready to rock out of the box
- 0.1" Breakout pads with 5V, D- and D+ data lines, GND and VBAT
- 5V input via USB Type C USB connector
- For charging single Lithium Ion/Lithium Polymer 3.7/4.2v batteries (not for older 3.6/4.1v cells)
- 100mA charge current, adjustable to 500mA by soldering a jumper closed
N/C YYHQQBAD 36V 2A Battery Power Supply Adapter Charger Output 42V 2A Charger Input 100-240 VAC Lithium Li-ion Li-Poly Charger for 10Series 36V Electric Bike DC5.52.5MM/2.1MM
N/C
Product description
Specifications:
- 100% Brand New and high quality Super strong protection.
- lnput : 100-240VAC,50/60Hz
- Output : 42V 2A
-Connector : DC5.5 x 2.5mm
- Charge indicator:Charging the red light is full of green light
- Security protection: OVP/OCP/ Overload protection/ Short-circuit protection
- Color: Black
- Power Max: 84W
Package included:
1Pcs 42V 2A Charger
1Pcs power power cable
Use and maintenance of the charger :
1. When charging, first connector to the battery, then connect to AC; after full, cut off AC, then pull the battery plug. If you pull the battery plug first while charging, especially when the charging current is large (red light), it is very easy to damage the charger.
2. When the LED light turns green, please continue charging for 2-3 hours.
3. Please do not run out of battery power, then charger. Otherwise the battery cannot be protected or even damaged.
4. long-term shallow discharge battery, about 3 months, for a deep discharge, is the so-called re-lighting, which is conducive to the activation of long-term immobile material in the deep part of the battery. Luminous means that riding the controller battery undervoltage protection action.
5.Please use the charger in a dry place in time.
6.When you do not use the charger, do not always connect the power supply.
7.Please confirm your battery, Because it is used to charge the lithium battery. Do not use the charger on the LiFepo4 battery, otherwise the charger will be got incredibly hot.
- Output 42V, World Wide Input Voltage 100-240VAC 50/60Hz, 36v Lithium Battery Power Charger. Short circuit & Overload & Overvoltage Protection. DC5.5*2.1MM Connector
- Global applicable AC input voltage, High efficiency, Soft starting current, reduced the impact of AC input effectively, small size, light weight.
- One Indication Light: Green(full), Red(charging), it stop automatically when the battery is full.
- Made of environmental-friendly material, safe and anti-interference, durable to use
- High efficiency, safe and fast for charging, 2A large current output
User questions & answers
| Question: | Is this charger compatible with my boosted rev electric scooter |
| Answer: | It is a 2-pin JST-PH |
| Question: | Can this be used for a hoverboard |
| Answer: | This is not it's intended use - it is a charger for a LiPoly battery, not a power supply. Can you use the LiPoly battery (once you used this product to charge it) to power the RasPi Zero? Well... Since the raspberry pi wants a 5v supply, you'll need to "boost" the 3.7v that the LiPoly battery typically supplies. Look at Adafruit's PowerBoost 500 Basic or 1000c breakout boards (the latter is actually a charger/booster). |
Valken Airsoft Li-po/Life Smart Battery Charger - Compact - 2-3 Cell Quick Balancing
Valken
Product description
The Valken compact balancing charger is compact, light, and can charge a 2 cell or 3 cell Li-po or Li-fe battery pack. There are separate corresponding balance ports for each type of battery pack. Please read the user manual carefully before charging.
- Output Current: 100-240V AC
- Display: 3x Bicolor LED
- Charging Ports: Separate 2 and 3 cell ports
User questions & answers
| Question: | Does it come with the battery for the gun or just the charger |
| Answer: | Yes it is, it charges great! |
| Question: | Will this work with a 7.4 Li-ion 1800mAh battery |
| Answer: | I am not sure, I bought this for an electric bike. |
| Question: | Does this charge batteries with mini tamia end on the battery |
| Answer: | Only to a battery. The 5 volt is an input. |
| Question: | Will this work with a 7.4 LiPo 1000 mah batterie |
| Answer: | Yes |
Cheerwing 4pcs 3.7V 550mAh Lipo Battery and 4-in-1 Charger for Syma X5SW X5 X5C X5C-1 RC Drone Parts
Cheerwing
Product description
Package Includes: 1pcs x charger, 4 pcs x 550mAh batteries
- 3.7V 550mAh 20C Lipo Battery(4PCS) with 4 In 1 Battery Charger
- Charger Voltage input: DC 5V; Voltage output: 4.2V ± 5%; Current output: 350mAh - 410 mAh
- Charging 4 battery at one time, Over charge protection, Short circuit protection
- Battery Size: 4.13x2.38x0.64CM; Fits Syma X5C, X5C-1, X5SC, X5SW
- Package Includes: 1pcs x charger, 4 pcs x 550mAh batteries
User questions & answers
| Question: | Can anyone tell me what kind of connectors these are? i think what i need are losi. the pictures aren’t detailed enough to tell |
| Answer: | Hello, the battery for X5SW-1 is 3.7V 500mAh, but our battery is 3.7V 550mAh. In this case, we suggest you purchase the 3.7V 500mAh battery for X5SW-1. Thank you. |
| Question: | Will batteries fit X5sw-1 drone |
| Answer: | What's a T5W? |
| Question: | do these fit in a t5w |
| Answer: | batteries did not work. save you money for batteries that work, charger junk also |
| Question: | Does it fit the cheerwing U841-1 Quadcopter Car |
| Answer: | They will work with the e013 |
Latest Reviews
View all
Highland Band Saws
- Updated: 10.04.2023
- Read reviews
Ping Pong Blades
- Updated: 26.03.2023
- Read reviews
Honeywell Mechanical Thermostats
- Updated: 19.04.2023
- Read reviews
Lego Building Toys
- Updated: 06.06.2023
- Read reviews
Se Emergency Foods
- Updated: 27.07.2023
- Read reviews