13 best kit with tool belts

Product description

Changing a serpentine belt without the proper tool can be frustrating and time consuming. Save yourself time and effort with a tensioner tool kit, and rely on the quality workmanship and innovative design of GEARWRENCH to handle any vehicle’s unique access challenges. Use the wide range of attachments on the ratcheting Wrench to easily reach and maneuver tensioners in almost any application.

• Combining the innovation of a GEARWRENCH ratcheting wrench with the requirements of the serpentine belt removal tool to provide the best possible combination
• Complete tool set for removing or installing the serpentine belt on vehicles with a spring loaded belt tensioner pulley
• Long bar can hold sockets directly or attach to the ratcheting wrench for maximum access
• Includes Drive Tools: Long Bar, Special GearWrench Ratcheting Wrench, and 3/8", 1/2" and 3/4" Adapters
• Includes 6 Point Sockets: 13 millimeter, 14 millimeter, 15 millimeter, 16 millimeter, 17 millimeter, 18 millimeter and 19 millimeter
• Includes Crowsfoot: 13mm, 14mm and 15mm

User questions & answers

Question:	Will it work on a 2003 ford ranger
Answer:	yes it can be changed.
Question:	What does this tool do that a breaker bar cannot
Answer:	It seems like more than you need but it is a good set with tools that you will use sometime. Nice carrying case.
Question:	Will it work on 2012 Dodge Grand Caravan sxt
Answer:	Yes, the only thing that you'll need to do is purchase concrete bits, that will allow you to drill smooth holes in the concrete block walls. Once you've drilled the hole, insert the molly and then mount your curtain rods. Good luck with your project.
Question:	What's the length of the red-handled long bar
Answer:	No, it's strictly a 110 volt setuo.

Product features

GEARWRENCH 3680D Serpentine Belt Tool Set

Changing a serpentine belt without the proper tool can be frustrating and time consuming. Save yourself time and effort with a tensioner tool kit, and rely on the quality workmanship and innovative design of GEARWRENCH to handle any vehicle’s unique access challenges. Use the wide range of attachments on the ratcheting wrench to easily reach and maneuver tensioners in almost any application.

GEARWRENCH Innovation for Speed and Access

The 3680D Serpentine Belt Tool Set combines the innovation of a GEARWRENCH ratcheting wrench with the requirements of the serpentine belt removal tool to provide the professional with the best possible combination of speed and access.

• Made to be the most reliable tools in the market today
• Tool solutions for most all situations
• Built to exceed tool standards
• Designed for removing and installing serpentine belts on vehicles with spring-loaded belt tensioners
• Includes accessories for specific vehicle applications, including GM, Ford, Chrysler, SAAB, VW and Volvo
• Carry case includes usage photos and instructions

User questions & answers

Question:	Can i use it on a Honda cr-v 2.2 diesel
Answer:	I bought mine for a Saab, but didn't fit. Just needed a 1/4 socet bar to release the tension. But have found it useful for those hard to reach bolts. Honda if I remember rightly uses the same method with a socket bar, there should be an arrow indicating the direction to release the tension. Hope this helps
Question:	can use on 2007 rav
Answer:	Did some research for you. Looks like a positive yes. This set will work on your car. A very great tool to have. If the socket you need is not in this tool set other sockets will fit. I think you will be ok. I hope this helps you. Have a great day.
Question:	can be use on 2007 Nissan Murano S
Answer:	Your murano has a bolt at the top for the tensioner all you need is a ratchet and socket. To tighten and loosen pulley. (After you loosen the bolt on pulley. ) A flex adapter may help too.
Question:	Is there a warranty associated for this tool that will last a lifetime? Just in case it breaks. I'm asking for a friend
Answer:	I think this tool kit has A lifetime warranty on it,most tools do

Product features

Take the concept of ‘help’ a big step further

The extra-long length lets you reach the deepest bolt and the two piece extension bar/handle design allows you to change the handle angle for increased leverage. Strong and dependable enough to last a lifetime.

Any specialty tool will help make an automotive repair or maintenance task easier, but Powerbuilt automotive installer tools take the concept of ‘help’ a big step further. It starts with the storage case – heavy-duty design ensures it will stand up to years of use and abuse. Inside the case lid you’ll find how to instructions and photos that show step-by-step usage instructions.

The finishing touch? All Powerbuilt installer kits meet or exceed ANSI and/or ASME standards so you can buy with confidence knowing you’ll get quality.

Product description

REXBETI Kids Tool Bag

• Perfect learning tool - Lessons like woodworking or home DIY programs are no longer something that kids can get a chance to experience in school. This REXBETI kids tool set will be a great way to get your kid engaged while enabling him or her to develop an array of abilities and DIY skills. Thanks to the gender-neutral colors of the tool set, it makes a wonderful gift idea for little boys and a fab gift idea for little girls who enjoy hanging out with daddy in the garage
• Reinforced tool belt - Made by heavy duty 600D fabric and reinforced by 12pcs rivets. Durable stitching offers a long time useage. 10 pockets creates plenty of space for tools. Adjustable belt is suitable for waist 20 inch to 32 inch
• Real hand tools - ( Tools are not toys and should always be used with adult supervision ) 14 piece real tools includes: 6 inch kids claw hammer / 6.7 inch long nose plier / 8.2 inch magnetic flat & phillips screwdriver / 8.6 inch magnetic level / 8 inch steel ruler / D-ring / 2 pieces wood pencil * 1 piece pencil sharpener / Kids safety goggle / 2 pieces spring clamps / 10ft measuring tape
• Fits perfect for small hands - All the tool set are real tools but small enough to fit the little hands of kids, perfect for children 7 years and up
• Buy with confidence - Give your kids a set of real tools to do home DIY.Both you and your kids will enjoy the fun of DIY interactions

User questions & answers

Question:	What is the size of the biggest pocket? I'm trying to find something that will fit my large tape measure and also my small waist
Answer:	Yes
Question:	I ordered a used, like new set and it did not come with the tool belt. Does it come separately
Answer:	In the trunk are 4 Disney princess dress up outfits.
Question:	Is the tool belt durable
Answer:	I don't know because when I bought this it was for my 3 year old granddaughter. She still dresses up with these outfits but she is small and wears a size 5.
Question:	What age is this set appropriate for
Answer:	I would say they are a size 4-5. My daughter is a size 4 and she can wear them over her clothes. She is about 35lbs.

Product features

Claw Hammer

- Drop forged carbon steel head

- Comfortable rubbery handle for fine grip

- 6 inch

Plier

- Long nose design for tight space

- Drop forged carbon steel

- Soft rubbery handle

- 6.7 inch

Screwdrivers & Ruler

(Screwdrivers)

- Magnetic head for easy use

- 1pc * Phillips head

- 1pc * Flat head

- 8.2 inch

(Ruler)

- Steel Ruler

- Inch / Metric

- 8 inch / 20 cm

Measuring Tape

- 10ft Inch / Metric

- Smooth operation

- Easy grip

Clamps / D-ring

- 2pc * Spring clamps

- 1pc * D-ring

Pencils * Pencil Sharpener

- 2pc * wood pencil

- 1pc * pencil sharpener

Magnetic Level

- 3 measuring ways - vertical, level and 45 degree

- Magnetic base

- 8.6 inch

Tool belt & Goggle

(Tool belt)

- Belt length from 20-32 inch

- 10 pockets

- Durable fabric, double stitching

(Goggle)

- Elastic band

- Soft design

• Essential safety tool. One end is a seat belt cutter for cutting seatbelt, and the other end is the window breaker tool with two hardened sharp and heavy carbon steel points.
• 2 Pack. Come with set of 2 car safety hammer and 2 mounting brackets. Give it to your children or family as a gift, making them feel peace of mind when driving.
• High performance and durable. Double-tipped hammers which are made of high grade carbon steel combined with engineering plastics, This car hammer is very sharp and easy to break out the window for life-saving.
• Ergonomic design. The anti-skid handle is long enough, about 6. 7in, making it easy to control. Only weighing 0. 3lb, it is so light that you can swing it easily. The reflective strip on both sides of the handle for high visibility
• Mounting bracket included. Keep the car hammer stationary and ready to use If needed. Easy to keep it in Glove compartment, door pocket or armrest Box etc. Note: Mounting screws is not included.

User questions & answers

Question:	Where do you store it in the car
Answer:	OUr car has a pocket in the door. Otherwise Glove compartment
Question:	Manufacturer is this gauranteed to cut any seatbelt
Answer:	I am not the manufacturer. I am a customer. Therefore, I cannot possibly make a guarantee on behalf of the manufacturer; and no customer can possibly do so either.
Question:	Will this break any car window or is it only a certain type of glass
Answer:	According to the U.S. Dept. of Transportation all vehicles that were made after 2013 were to start phase-in of laminated side glass with complete requirement by the end of 2017. So I don’t want to carry around this hammer thinking that it’s going to actually work on my car if I need it. https://www.thv11.com/article/news/local/verify/verify-do-emergency-tools-used-to-break-windows-work-on-all-vehicles/451834057
Question:	Has anyone actually used this
Answer:	Usage Report: https://www.thv11.com/article/news/local/verify/verify-do-emergency-tools-used-to-break-windows-work-on-all-vehicles/451834057

Product features

Suitable for Various Vehicles

We wish you will never need to use an escape tool, but we hope you can have this high-quality handy safety hammer in case of danger. Our car safety hammer suitable for various vehicles as car, bus, truck and so on.Our emergency escape tool would not slip while using. The anti-slip design on the handle makes it easier to be controlled. Our safety hammer not cause injury in daily life. The mounting base prevents the hammerhead from scratching something and the hidden blade prevents from injuring someone.

Quick Knocking Window Using Tips

Choose the left or right window and hit the corner of the glass. The smaller the corner is, the easier the glass is to break. The front and backward windshield will crack on the surface but will not be broken when hitten by the hammer.

Breaks the Car Window Easily

Extremely hard hammerhead ensures you to break the glass with only 1 or 2 hit.

Frees You from the Seat Belt

Sharp stainless cutter can slice through the seat belt effortlessly.

Can be Easily Found in Dim

You can use it in darkness without difficulty for the high-visibility reflective strips.

Can be Kept Conveniently

Being compact and light-weight, our product is suitable for hanging on wall and putting in pocket.

• THEIR FIRST REAL TOOL SET: Get the little ones off the gadgets and spend quality time learning real DIY skills with adults. The Hi-Spec Kids’s Blue Tool Kit Set with Tool Belt contains a variety of real metal hand tools for boys and girls to explore and do practical DIY projects
• METAL TOOLS FOR BEGINNERS: Carefully chosen for young starter’s usage, these are real tools selected from adult DIY hand tool sets. Everything needed for hammering, screw-driving, gripping, measuring, and marking-up NB. Ideally suited for ages 6-8 years and above with adult supervision
• PRACTICAL DIY: Don't buy throw-away toy tools - these are tools that even the grown-ups would want to use. Including a metal claw hammer with soft-rubber grip, two full-size metal screwdrivers, and mini long-nose pliers. All carried in a brightly coloured and adjustable workman’s hard-fabric tool belt
• BUILD FOUNDATIONS NOW: Young minds and restless hands need creative outlets. Do real DIY work with the carpenter’s pencils and sharpener, spring clamps and carabiner clip, ruler, retracting tape, and spirit-ball level. Position and put-up pictures and decorations, perform measurements and assemble workpieces
• LOOK THE PART: The adjustable tool belt, made of hard-wearing splash-proof fabric, fits most sizes of child (Waist 56-69cm) and has pockets, holders, and a hammer clasp. A pair of dust glasses keeps specks and debris out, and the full-leather workman’s gloves protects fingers and hands

User questions & answers

Question:	What is the widest waist size this belt can fit
Answer:	not sure it fits my grandson fine
Question:	Can we order the belt for a smaller sized waist? 27 inches will be too big for our nephew
Answer:	He will grow I to it soon enough. Was just a little big for a 6 year old last Christmas; fits better every day.
Question:	In the video I see carrying cases for this tool belt. Are they available for purchase
Answer:	Hi-Spec 16 Piece Childrens Tool Kit with Kids Size Tool Belt, Real Leather Work Gloves, Safety… Hi-Spec 17 Piece Kids Tool Kit with Blue Truck Tool Box https://www.amazon.com/Hi-Spec-Scissors-Construction-Educational-Childrens/dp/B07P8LJY8D Hi-Spec 18 Piece Kids Tool Kit with Blue Tool Bag https://www.amazon.com/Hi-Spec-Scissors-Construction-Educational-Childrens/dp/B00XK9YHBG
Question:	Do you offer this in Pink
Answer:	Hi-Spec 12 Piece Young Builder's Tool Set Tool Belt with Real Hand Tools, Accessories, Eye… Unfortunately, no, due to brand ownership.

Product features

2 x Screwdrivers

• 1pc Screwdriver: 1/4"" Slotted - Blue & Grey - CRV
• 1pc Screwdriver: #2 Phillips- Blue & Grey - CRV"

Real Hand Tools

• 2pc Mini 3' Blue Nylon Clamps with Grey End Grips
• 1pc Blue Spring Carabiner Hook
• 8oz (225g) Claw Hammer

Measurement & Marking Tools

• 1pc 6" Blue Plastic Level with steel ball inside - Blue
• 1pc 2M transparent Tape Measure (Metric & SAE) 8
• 8" (200mm) Wooden Rule (Metric & SAE)
• 2pc Blue Pencils
• 1pc Blue Pencil Sharpener

Childrens PPE

• Children's Safety Glasses (Universal Size)
• One Pair of 8"(200mm) Children's Leather Gloves

Adjustable Waistband

Adjusts to any length between 56 - 69cm / 22" - 27"in.

Hammer Loop

Convenient metal loop keeps the hammer at the ready.

Deep Pockets

600D nylon fabric deep pockets keeps sharp and large tools securely inside.

• ENGINE TIMING TOOL KIT: Does your Chevrolet, Fiats or Alfa Romeo engine feel unstable or have weak acceleration? Use these tools to fix camshaft tensioner or other parts in the motor, and then check or replace parts.
• PREMIUM MATERIAL: Orion Motor Tech parts are made with high-quality corrosion resistant materials with maximum durability and strength, getting your engine running like new. The different parts are made of heat-treated carbon steel and chrome with a powder metallurgy camshaft gear lock.
• APPLICABLE ENGINES: Our alignment locking tools are compatible with a large range of engines including Chevrolet, Fiats and Alfa Romeo 2003 - 2012 16V 1.6 1.8 engine. Also fits Chevrolet Cruze, Orlando 1.4,1.6,1.8 and Fiat Croma, Alfa Romeo 159 with 939A4.000 engines.
• STRICTLY TESTED: For quality assurance, our parts have been rigorously tested to improve efficiency and provide the highest-grade tools on the market. Look to OMT for the finest craftsmanship and the most reliable parts that will fix your engine in no time.
• EASY TO USE: This engine timing tool kit is equipped with a step-by-step user manual for quick and easy application. Includes 1 Camshaft locking tool, 2 Camshaft gear locking tools, 1 Flywheel locking tool, 1 Engine Tensioner spanner, 1 V-ribbed belt tensioner locking tool, 1 Crankshaft locking tool, 1 Timing belt tensioner locking tool, 1 Blow molded tool case and 1 user manual.

User questions & answers

Question:	Does this work for the 2014 ford fiesta
Answer:	Sorry,  this Engine Camshaft Tensioning Locking Alignment Timing Belt Tool Kit doesn't fit a 2014 Ford fiesta 1.6.
Question:	will this work on a 2015 sonic 1.8l timing belt engine
Answer:	I am 99 percent sure it will.
Question:	Will this work on a 2013 Chevy Cruze
Answer:	Sorry, this Engine Camshaft Tensioning Locking Alignment Timing Belt Tool Kit doesn't work on a 2013 Chevy Cruze 1.8. Thanks
Question:	Will this work with chains or just belts
Answer:	Just timing belts

Product features

PACKAGE LIST

2 Crankshaft/Fuel Pump Alignment Pins (5.8mm)

Crankshaft TDC Locking Pin

Flywheel Locking Tool

Camshaft Sprocket Remover

Camshaft Setting Plate

Locking Pin (9.4mm)

Tensioner Locking Pin

Crankshaft Locking Pin

Camshaft Sprocket Holding Tool

Flywheel Timing Pin 13 Camshaft/Crankshaft Pin

Plastic storage box

Manual

• TUNE-UP TIME: Does your Ford or Volvo engine feel unstable or have weak acceleration? Then it’s time for a tune-up or maintenance. Roll up your sleeves and use these vehicle tools to help you check, fix, or replace your camshaft tensioner or other parts of your engine.
• WIDE COMPATIBILITY: Our engine tools are compatible with a large range of Ford vehicles with 1.5L & 1.6L engines: B-MAX, C-MAX, EcoSport, Escape, Fiesta, Focus, Fusion, Galaxy, Ka+, Kuga, Mondeo, Puma, S-MAX, Tourneo Connect, Tourneo Courier, Transit, Transit Connect, Transit Courier. Our tool kit also works with select Volvo vehicles: S60, S80, V40, V60, V70.
• PREMIUM MATERIAL: Orion Motor Tech parts are made with high-grade corrosion resistant materials for maximum durability and strength, getting your engine running like new. The different parts are made of heat-treated #45 steel and #A3 steel with a powder metallurgy camshaft sprocket lock.
• EASE OF USE: This engine timing belt tool set comes equipped with a step-by-step user manual for quick and easy application. Included in the convenient storage box are camshaft sprocket and crankshaft pulley alignment tools, a camshaft alignment plate, a camshaft setting bar, as well as all the pins necessary for locking other various parts of your engine.
• QUALITY ASSURANCE: Our parts have been rigorously tested to improve efficiency and provide the highest-grade tools on the market. Look to OMT for the finest craftsmanship and the most reliable parts that will fix your engine in no time. We back these parts with our usual strong warranty and friendly customer service, ensuring that you’ll enjoy their use for years to come.

Product features

Orion Motor Tech Engine Timing Tool Kit

Designed with your Ford in mind, this tool set will help you replace the timing belt on your 1.5L & 1.6L Duratec engines with variable valve timing. The camshaft, crankshaft, and flywheel pins included are also compatible with a variety of gas and diesel Ford engines, so you can get the most value out of this kit.

Used to lock the camshafts in their timed position when engine repair or rebuild requires the cam pulleys to be removed and timed.

Product description

15 pc. Serpentine belt tool set with locking flex head ratcheting wrench. Patented tool combines the innovation of a GearWrench ratcheting wrench with the requirements of the serpentine belt removal tool to provide the professional with the best possible combination.

• Patented tool combines the innovation of a gear wrench ratcheting wrench with the requirements of the serpentine belt removal tool to provide the professional with the best possible combination
• Color: Black
• Manufactured in Taiwan

User questions & answers

Question:	what is the size of the racketing wrench
Answer:	The wrench is about 9 inches long ! Bit size doesn't matter since its only made for the accompanying attachments! I have been working on cars for 30yrs !!! This is one of the BEST Belt Tools I have ever owned !!!! LOVE IT !!!!!!!!!!!
Question:	Is it worth the extra money to get the flex head, instead of the standard? I’ve seen mix reviews on this
Answer:	I prefer the flex head, just for the fact that I can manuver it in tighter spots, but I would say if you can either head separate to get them both
Question:	What's the part number for the locking flex ratcheting wrench? Looking to upgrade the previous set
Answer:	We have several sets of locking flex ratcheting wrench sets....85698, 85698R. 85798, 85798R
Question:	What's the part number for the locking flex ratcheting wrench? Looking to upgrade the previous set
Answer:	89042

• Belt changing tool help RZR owner to change a belt, the clutch tool can help you easy to remove the clutch cover
• Belt changing tool made by Solid Aluminum Alloy, the clutch tool is dismountable and flexible
• A must tool kit for your Polaris RZR: The RZR belt changing tool makes changing your belt easier,and speed up change belts,save the time of Polaris RZR owner
• Custom design: This rzr belt removal tool is custom made for Polaris XP/RZR XP4 1000/RZR S 900 etc almost all Polaris rzr belts
• Easy to use: the belt changing tool is with an ergonomic handle for a comfortable grip, it’s very easy to changing the belt. It can be rotated 360 degrees.

User questions & answers

Question:	Will this work for my 2016 turbo
Answer:	it’s a turbo , there is no turbo 1000 — yes it will work
Question:	Does this fit a 2016 general
Answer:	Yeah it’ll work. I have a 2017
Question:	Will this work on a 2012 rzr 4 900 xp
Answer:	Yes, no difference.
Question:	will this work on my 2020 rzr xp 4 turbo
Answer:	Yes, there is little difference between turbo and nonturbo CVT covers. Easier to use the flex head socket driver, and you still separate the secondary clutch with the clutch separator tool. Good set for the money!

Product features

Helps to make changing the belt easy without modification

A must tool kit for your Polaris RZR: The RZR belt changing tool makes changing your belt easier, and speed up change belts, save the time of Polaris RZR owner.

NOTE:

DOES NOT FIT FOR 2018 rzr xp 1000

DOES NOT FIT FOR Polaris RZR Turbo,it fits for Polaris RZR only

Package Included:

1 X Belt Changing Tool

1 X Clutch Tool

1 X Set of Socket 5mm-13mm

• Belt changing tool help RZR owner to change a belt, the clutch tool can help you easy to remove the clutch cover
• Belt changing tool made by Solid Aluminum Alloy, the clutch tool is dismountable and flexible
• A must tool kit for your Polaris RZR: The RZR belt changing tool makes changing your belt easier,and speed up change belts,save the time of Polaris RZR owner
• Custom design: This rzr belt removal tool is custom made for Polaris XP/RZR XP4 1000/RZR S 900 etc almost all Polaris rzr belts
• Easy to use: the belt changing tool is with an ergonomic handle for a comfortable grip, it’s very easy to changing the belt. It can be rotated 360 degrees.

User questions & answers

Question:	Does it come in case? Or small bag
Answer:	no it does not
Question:	Will this fit my 2018 polaris rzr
Answer:	Yes
Question:	Will this tool work from my general 1000 Polaris
Answer:	This tool will work for the Polaris 1000, 900 and 800 before 2018
Question:	Does this work for 2019 rzr 4 1000xp
Answer:	it shouls works fine on my 2017 1000 xp

Product features

Helps to make changing the belt easy without modification

A must tool kit for your Polaris RZR: The RZR belt changing tool makes changing your belt easier, and speed up change belts, save the time of Polaris RZR owner.

NOTE:

DOES NOT FIT FOR 2018 rzr xp 1000

DOES NOT FIT FOR Polaris RZR Turbo,it fits for Polaris RZR only

Package Included:

1 X Belt Changing Tool

1 X Clutch Tool

1 X Set of Socket 5mm-13mm

Product description

Replacement Abrasive Belt kit for the Work Sharp Knife & Tool Sharpener (WSKTS). Kit includes P80 Coarse belts, P220 Medium Grit Belts and Fine Grit Honing Belts - 6 total belts. Belts are 1/2" x 12" and do not fit other Work Sharp tools or accessories. These premium grade abrasives are long lasting and designed for sharpening and grinding applications.

From the Manufacturer

Replacement Abrasive Belt kit for the Work Sharp Knife & Tool Sharpener (WSKTS). Kit includes P80 Coarse belts, P220 Medium Grit Belts and Fine Grit Honing Belts - 6 total belts. Belts are 1/2" x 12" and do not fit other Work Sharp tools or accessories. These premium grade abrasives are long lasting and designed for sharpening and grinding applications.

• Assorted replacement belt kit includes P80 coarse, P220 medium, and 6000 fine. These abrasive belts are direct replacements for the abrasive belts that comes standard with the WSKTS & WSKTS-KT
• Premium grade, long lasting abrasive belts. Specific selection for optimum sharpening performance
• Manufactured by leading brands in belt technology: Norton (P80 & P220) and Micro-Mesh (6000)
• Abrasives: aluminum oxide (P80); ceramic oxide (P220); silicon carbide (6000) - Backing: waterproof polyester (P80, P220); flexible cotton backing with polymer emulsion cushioning layer (6000)

User questions & answers

Question:	Are these the 1/2x12 belts? amazon is off on the size
Answer:	Yes. That wheel will fit this grinder.
Question:	How long do the belts last? 20 sharpenings, 50 sharpenings, etc.. Do the belts all last equally long, or will fine wear out faster than medium
Answer:	Good Afternoon Jacky, The product specs. show is not intended to cutoff, but with cutting disc it will allow you to cutoff.If you are looking for a tool that has both functions we have a Dewalt cutoff that specs show you can use it as cutoff & grinder.Please let me know, if we can further assist you.
Question:	A friend of mine loves his work sharp, the only concern he has is sharpening the very tips of his pocke knives. He says its somewhat difficult
Answer:	Not recommended. If it is to cut a few you can use a diamond blade.
Question:	I just received my sharpener. Of the five kits they offer: assorted, coarse, medium, fine and diamond, which is the one that is needed the most
Answer:	Yes, the CMEG100 can be used for sanding.

• 【APPLICABLE ENGINE】:Compatible with FORD Duratec petrol engine 1.25, 1.4, 1.6, 1.7, 1.8, and 2.0 twin cam 16V; compatible FORD Duratorg diesel engine 1.4, 1.6, 1.8, 2.0 TDCI; compatible with FORD ESCOBOOST 1.6 Ti-VCT, 1.5/1.6 VVT; compatible with MAZDA PSA 1.4, 1.6HDI engine. engine code: 1.25 16V (DHA, DHB, DHC, DHD, DHH, DHG, F8JA, F8JB, FUJA, FUJB, M7JA, M7JB) ; 1.4 16V (ASDA, ASDB, FHA, FHD, FHE, FHF, FXDA / C, FXDB / D, FXJA, FXJB)
• 【ENGINE CODE】: 1.6 16V (FYDA / C, FYDB / D, FYJA, FYJB, L1F, L1J, L1L, L1N, L1O, L1T, L1V, L1W, HWDA, HWDB); 1.7 16V (MHA, MHB); 1.8 16V (EYDB, EYDC, EYDD, EYDE, EYDJ, EYDG, EYDI, EYDJ, EYPA, EYPC, RKA, RKB, RKF, RKH, RKJ, RKK); 1.8 16V with control chain (CDBB, CGBA / B, CHBA / B, CSDA, CSDB, QQDA, QQDB, QQDC); 2.0 16V (EDBA / C, EDBB, EDBD, EDDB, EDDC, EDDD, EDDF, NGA, NGB, NGC, NGD); 2.0 RS / ST170 (ALDA, HMDA) 2.0 16V with control chain (AODA, AODB, AOWA, CJBA / B)
• 【REPLACE OEM】: This flywheel locking timing tool kit have 18pc tools, have everything you need for timing, replace OEM: 303-1097; 303-748; 303-1550; 303-1552; 303-1054; 303-1059; 303-735; 303-1552; 303-393A; 303-393-01; 303-393-02; 303-376B; 303-651; 303-193; 303-507; 303-734; 303-732; 303-xtra
• 【COMPATIBLE WITH VEHICLE】: for Focus (2004-2008); for Focus C-Max (2003-2008); for Mondeo (2007-2008) 1.6 Ti-VCT 16V (HXDA) Diese engines; for Duratorq Fiesta / Courier (2000-2006); for Focus (1998-2006); for Focus C-Max (2003-2008); for Mondeo (2007-2008); for Tourneo Connect (2002-2008); for Transit Connect (2002-2008); for Fusion (2002-2008); for S-Max (2006-2008); for Galaxy (2006-2008); 012 Ford B-Max 1.4L Duratec-16V; 2015 Ford C-Max 1.5L EcoBoost
• 【FITMENT VEHICLE】: 2011 Ford C-Max 1.6L EcoBoost, 1.6L Duratec-16V Ti-VCT;13 - 14 Ford Fusion 1.6L EcoBoost; 13 - 18 Ford Fusion 1.5L EcoBoost; 14 - 16 Ford Transit 1.6L EcoBoostfor 03 - 05 Mazda MP 3.0L; 04 - 06 Mazda Tribute 2.0L 2.3L & 3.0L; 04- 09 Mazda 3 2.0L 2.3L; the timing tool kit compatible with Ford and Mazda vehicles with a wide range of modern, there are many models have not been written

Product features

Fit Engine

Compatible with Ford Engine:

1.25 16V (DHA, DHB, DHC, DHD, DHH, DHG, F8JA, F8JB, FUJA, FUJB, M7JA, M7JB);

1.4 16V (ASDA, ASDB, FHA, FHD, FHE, FHF, FXDA / C, FXDB / D, FXJA, FXJB);

1.6 16V (FYDA / C, FYDB / D, FYJA, FYJB, L1F, L1J, L1L, L1N, L1O, L1T, L1V, L1W, HWDA, HWDB);

1.7 16V (MHA, MHB);

1.8 16V (EYDB, EYDC, EYDD, EYDE, EYDJ, EYDG, EYDI, EYDJ, EYPA, EYPC, RKA, RKB, RKF, RKH, RKJ, RKK);

1.8 16V with control chain (CDBB, CGBA / B, CHBA / B, CSDA, CSDB, QQDA, QQDB, QQDC);

2.0 16V (EDBA / C, EDBB, EDBD, EDDB, EDDC, EDDD, EDDF, NGA, NGB, NGC, NGD);

2.0 RS / ST170 (ALDA, HMDA) 2.0 16V with control chain (AODA, AODB, AOWA, CJBA / B);

Compatible with MAZDA Engine:

MAZDA PSA 1.4 1.6HDI engine

Applicable Vehicle Model Include （many models are not listed）:

Focus (2004-2008);

Focus C-Max (2003-2008);

Mondeo (2007-2008) 1.6 Ti-VCT 16V (HXDA) Diese engines, Duratorq Fiesta / Courier (2000-2006);

Focus (1998-2006);

Focus C-Max (2003-2008);

Mondeo (2007-2008);

Tourneo Connect (2002-2008);

Transit Connect (2002-2008);

Fusion (2002-2008);

S-Max (2006-2008);

Galaxy (2006-2008).

OEM Equivalent Part Number:

303-1097; 303-748;

303-1550; 303-1552;

303-1054; 303-1059;

303-735; 303-1552;

303-393A; 303-393-01;

303-393-02; 303-376B;

303-651; 303-193;

303-507; 303-734;

303-732; 303-xtra.

Function

• Designed to pulling off the camshaft timing belt wheel and locking or positioning the engine output shafts such as the camshaft and the crankshaft.

• To lock and/or position camshaft, crankshafts and time belt tensioners, as well as for adjust the VTC unit.

High Quality Material

Made of high quality heavy duty steel, high hardness and strength,not easy to break.

OEM Fit

As same as OEM, high accuracy which could perfect fit engine, comprehensive kit fit more vehicle, have eveything you need, and help you save much money.

Package Include:

1 X flywheel locking tool with 2 adaptors(303-393A);

9 X timing pin;

1 X Camshaft positioning plate(303-376B);

1 X Timing belt tensioner(303-1054);

1 X Variable camshaft timing hydraulic control device(303-1097);

1 x Camshaft sprocket puller;

1 X Crankshaft shock absorber(303-1550);

1 X Camshaft positioning plate(303-1552);

1 X plastic suitcase.

• Value Real Kid Tool:Come with 95 PCS tool including hammer，screwdriver, pliers，spring clamps，safety glasses，gloves, steel ruler, measuring tape, LED flashlight,pencil and other accessories and safety equipment.
• Reinforced Tool Belt & Carrying Bag- The belt and bag are made by heavy duty 600D fabric,durable for long time use. The belt reinforced with Rust Proof Rivet, 10 pockets creates plenty of space for tools. Adjustable belt fits most sizes of child (Waist 20-32’’).The Bag is big and sturdy enough for safe transportation to the next project.
• This kit is made from quality materials,let kids look and feel the parts,while also staying protected with universal size work gloves,great for DIY, construction, landscaping, gardening, woodworking and more.
• Great Gift for Kids ：They are designed with small size and comfortable for kids ,this set will be a great way to get your kid engaged while enabling him or her to develop an array of abilities and DIY skills.(Tools are not toys and should always be used under the supervision of an adult. We add some pure oil on the surface of the steel part to ensure lubricating，please wipe them clean before you kid use them .)
• 100% RISK FREE PURCHASE: If you are not satisfied with incly Garage Storage System , we’re very happy to either provide a no-questions-asked Refund or Replacement. Order today risk free!

User questions & answers

Question:	Do all the tools and pieces fit in the bag
Answer:	Yes, all the tools fit in the bag and my 7 year old loves it!

Product features

INCLY Kid Real Tool

This kit is made from quality materials,let kids look and feel the parts,while also staying protected with universal size work gloves,great for DIY, construction, landscaping, gardening, woodworking and more