11 best tig weldings
TIG welding, or Tungsten Inert Gas welding, is a popular welding process that uses a non-consumable tungsten electrode to create an electric arc that melts the base metal and filler rod (if used) to create a weld joint. This process is widely used in various industries for its precision and ability to produce high-quality welds. Here are some key points about TIG welding:
Equipment: TIG welding requires specific equipment, including a TIG welder, a tungsten electrode, a welding torch, shielding gas (typically argon or helium), and filler metal (if needed).
Non-Consumable Electrode: Unlike other welding processes, the tungsten electrode used in TIG welding is non-consumable, meaning it doesn't melt during the welding process.It plays a crucial role in maintaining the arc.
Shielding Gas: TIG welding uses an inert shielding gas, usually argon, to protect the weld area from atmospheric contamination. This gas creates a stable environment for welding and ensures a clean, strong weld.
Precision and Control: TIG welding is known for its precision and control, making it suitable for welding thin materials and producing aesthetically pleasing welds. Welders can adjust the heat input and welding parameters to achieve the desired results.
Clean Welds: TIG welding produces clean, spatter-free welds with minimal smoke or fumes. This is especially important in applications where appearance and cleanliness are critical.
Versatility: TIG welding can be used on a wide range of materials, including steel, stainless steel, aluminum, copper, and exotic metals. It is suitable for both thick and thin materials.
Manual Skill: TIG welding requires a high level of manual skill and precision from the welder. It is often used for intricate welds, such as in aerospace, automotive, and artistic applications.
Welding Positions: TIG welding can be performed in various positions, including flat, horizontal, vertical, and overhead, making it adaptable to different welding scenarios.
Welding Accessories: Welding equipment accessories for TIG welding may include foot pedals for amperage control, torch cooling systems, and specialized TIG welding gloves and helmets.
Safety Precautions: As with any welding process, TIG welding involves high temperatures, UV radiation, and potential hazards from fumes and gases. Proper safety gear and ventilation are essential.
In summary, TIG welding is a precise and versatile welding process that uses a non-consumable tungsten electrode and inert shielding gas to create clean and high-quality welds. It is commonly used in industries where precision and control are paramount, such as aerospace, automotive, and high-end fabrication. To perform TIG welding effectively, welders require skill and specialized equipment.
Below you can find our editor's choice of the best tig weldings on the marketProduct description
6 x #10 Pyrex Glass Cup
1 x #4 13N08 Alumina nozzle D6.5mm x 1/4"
1 x #5 13N09 Alumina nozzle D8.0mm x 5/16"
1 x #6 13N10 Alumina nozzle D9.50mm x 3/8"
1 x #7 13N11 Alumina nozzle D11.0mm x 7/16"
1 x #8 13N12 Alumina nozzle D12.50mm x 1/2"-
1 x #4 53N58 Alumina Nozzle Cups 6.5mm 1/4"
1 x #5 53N59 Alumina Nozzle Cups 8.0mm 5/16"
1 x #6 53N60 Alumina Nozzle Cups 9.5mm 3/8"
1 x #7 53N61 Alumina Nozzle Cups 11.0mm 1/16"
1 x #8 53N61S Alumina Nozzle Cups 12.5mm 1/2"
1 x 17CB20-1.0 Collets Body Stubby Gas Lens
1 x 17CB20-1.6 Collets Body Stubby Gas Lens
1 x 17CB20-2.4 Collets Body Stubby Gas Lens
1 x 17CB20-3.2 Collets Body Stubby Gas Lens
1 x 17CB20G Collets Body for Tig Welding Torch 1.0mm 0.040"
1 x 17CB20G Collets Body for Tig Welding Torch 1.6mm 1/16"
1 x 17CB20G Collets Body for Tig Welding Torch 2.4mm 3/32"
1 x 17CB20G Collets Body for Tig Welding Torch 3.2mm 1/8"
2 x 10N22S Collets for Tig Welding Torch 1.0mm 0.040"
2 x 10N23S Collets for Tig Welding Torch 1.6mm 1/16"
2 x 10N24S Collets for Tig Welding Torch 2.4mm 3/32"
2 x 10N25S Collets for Tig Welding Torch 3.2mm 1/8""
1 x 57Y04 Short Back Cup for Tig Welding Torch
1 x 57Y03 Medium Back Cup for Tig Welding Torch
1 x 57Y02 Long Back Cup for Tig Welding Torch
12 x Temperature Resistant O-rings
6 x Red O-rings
1 x 18CG-20 Cup Gasket
1 x 18CGG Cup Gasket
- 55pieces TIG Torch Accessories (consumables)
- With excellent plasticity, toughness and crack resistance, especially low temperature impact toughness higher. Uses: for a variety of locations of the pipeline TIG welding arc welding and arc welding, can be satisfied with the welding joints. Can be welded carbon steel and some low alloy steel.
- Region free and easy to use, can be used for WP-17 WP-18 WP-26 TIG Welding Torch.
- Its electric conductivity is most closed to 2% thoriated tungsten electrode at either AC or DC, and no need any welding program changes.
- Applicable to Machine such as Rilon, Riland, Jasic, Mitech, Chiry, UNT, Krypton, Longetivity, Berlan and so on.
User questions & answers
Question: | Are the clear cups compatible with AC |
Answer: | It is not the make of the machine that is important. Rather it is the torch. If you have a standard size 17 torch it should work. |
Question: | I like the kit and bought one. Having difficulty seeing how to use the pyrex cups? Unfortunately mine arrived with a broken plastic box |
Answer: | China |
Question: | Will this fit Canaweld tig maxhine |
Answer: | Too long, and your couch may be damaged. Look elsewhere |
Question: | i have one vivohome tig stick/mma welding machine dual voltage 110/220v tig 200cp is my machine suitable for your product? what is the difference be |
Answer: | Dear, Our sofa set is made of faux leather which similar to natural leather, bright appearance, soft texture, wear resistance, folding resistance, acid and alkali resistance. Thank you for your attention |
- MAXIMUM DEXTERITY▶ Soft grain leather construction for optimal hand flexibility and feel.Seamless index finger increases control and grip while the keystone thumb design improves ergonomics and comfort.
- STRATEGIC HEAT RESISTANCE▶ Thin knit cotton top hand liner increases heat resistance and improves comfort for long term use. Unlined bottom hand to maximize dexterity.
- INDUSTRIAL DURABILITY▶ Constructed of top grain & split leather, sewn with kevlar thread and reinforced at multiple high wear points for long lasting durablity.
- USED BY PROFESSIONALS▶ This glove model is used by professional fabricators on a daily basis.
Product features
Premium Leather TIG Welding Gloves
The Premium TIG Welding Gloves are made of grain and split leather, sewn with Kevlar thread and feature a unique finger and liner design.
These materials and features provide excellent dexterity and comfort while enhancing heat resistance and durability when compared to other TIG welding gloves. Suitable for professional use.
Multi-Leather Exterior
The black split leather top hand resists heat and abrasion while the white grain leather palm and fingers provides dexterity & comfort.
Keystone Thumb
The ergonomic keystone thumb design improves hand ergonomics and fit.
True - Fit
Three kinds of models with elastic,super dexterity and comfort.
Consistent Quality
Each pair of gloves is manufactured to strict quality specifications to provide consistent fit and function.
Product description
You don't have to sacrifice your fingers for a pretty weld! when welding being comfortable results in the best welds possible. In order to be comfortable you have to protect yourself from heat and get in a steady working position.
The tig finger enables you to rest your hand on a work piece without having to worry about the metal heating up and burning your hand. Step up to the next level of tig welding and allow yourself to slide smoothly along hot metal and lay down that perfect bead.
The tig finger has become a welding industry standard, allowing welders all over the world to slide smoothly along hot metal, without sacrificing their fingers. Just slip the tig finger over your tig glove and prop right next to the weld. It's like having a prop in your pocket.
- Finish that long pass without burning your fingers
- 2pk durable design ideal for any tig job
- Increases the lifespan of your tig glove
- Great for hobbyists and industrial welders
User questions & answers
Question: | What is this thing made out of |
Answer: | You need to use the appropriate collet and body for the pyrex cups and TWO of the green O rings for a secure fit. Basically the two O rings seal and hold the pyrex cups on. I have been plumb happy with the kit as it has worked well for me. |
Question: | Can it be used for stick welding pipe |
Answer: | If that welder has a size 17 or equivalent torch it should. |
Product description
Engineered to exacting specifications, you can count on our premium, long-lasting electrodes to perform time and time again. With reliable arc-striking and a low burn-off rate, these electrodes maintain the highest quality of arc while adhering to ANSI and AWS standards. Ceriated tungsten performs exceptionally well in both AC & DC applications and perfect for welding aluminum alloys, magnesium alloys, nickel alloys, copper alloys, titanium alloys, low-alloyed steels, and stainless steel.
- Pack of 10 tungsten electrodes - EWCe-2 2% ceriated (Grey)
- 1/16" diameter, 7" length
- Ground annealed
- Comply with ANSI/AWS Standard A5.12M/A5.12:2009 ISO 6848:2004 MOD.
- Non-radioactive electrodes
Product description
▲Fit For: Tig WP-17/18/26:
▲Package Included:
● 6 x #10 Pyrex Glass Cup
● 1 x #4 13N08 Alumina nozzle D6.5mm x 1/4"
● 1 x #5 13N09 Alumina nozzle D8.0mm x 5/16"
● 1 x #6 13N10 Alumina nozzle D9.50mm x 3/8"
● 1 x #7 13N11 Alumina nozzle D11.0mm x 7/16"
● 1 x #8 13N12 Alumina nozzle D12.50mm x 1/2"
● 1 x #4 53N58 Alumina Nozzle Cups 6.5mm 1/4"
● 1 x #5 53N59 Alumina Nozzle Cups 8.0mm 5/16"
● 1 x #6 53N60 Alumina Nozzle Cups 9.5mm 3/8"
● 1 x #7 53N61 Alumina Nozzle Cups 11.0mm 1/16"
● 1 x #8 53N61S Alumina Nozzle Cups 12.5mm 1/2"
● 1 x 17CB20-1.0 Collets Body Stubby Gas Lens
● 1 x 17CB20-1.6 Collets Body Stubby Gas Lens
● 1 x 17CB20-2.4 Collets Body Stubby Gas Lens
● 1 x 17CB20-3.2 Collets Body Stubby Gas Lens
● 1 x 17CB20G Collets Body for Tig Welding Torch 1.0mm 0.040"
● 1 x 17CB20G Collets Body for Tig Welding Torch 1.6mm 1/16"
● 1 x 17CB20G Collets Body for Tig Welding Torch 2.4mm 3/32"
● 1 x 17CB20G Collets Body for Tig Welding Torch 3.2mm 1/8"
● 2 x 10N22S Collets for Tig Welding Torch 1.0mm 0.040"
● 2 x 10N23S Collets for Tig Welding Torch 1.6mm 1/16"
● 2 x 10N24S Collets for Tig Welding Torch 2.4mm 3/32"
● 2 x 10N25S Collets for Tig Welding Torch 3.2mm 1/8""
● 1 x 57Y04 Short Back Cup for Tig Welding Torch
● 1 x 57Y03 Medium Back Cup for Tig Welding Torch
● 1 x 57Y02 Long Back Cup for Tig Welding Torch
● 12 x Temperature Resistant O-rings
● 6 x Red Temperature Resistant O-rings
● 1 x 18CG-20 Cup Gasket
● 1 x 18CGG Cup Gasket
● A refined transparent plastic pac
- 55PCS TIG Welding Torch Accessories Kit
- Type: welding accessories.
- Fit For: Tig WP-17/18/26.
- Applicable Scope: TIG.
- Copper material Electrode clip, a very small amount of impurities.
User questions & answers
Question: | Will this fit a CK 17 torch |
Answer: | Yes it will fit |
Question: | Dose this come in a case or something to keep all the parts organized and from getting lost |
Answer: | The main material of this welding protection finger cover is glass fiber, this material has the effect of high temperature resistance, which can effectively protect your fingers working in high temperature welding environment. |
Question: | Tungsten size |
Answer: | Yeah probably. I used them for tig when I had to rest my pinky fingers on the object I was welding on. If you are using them for stick welding pipe, you should have distance between the stinger and hand to the pipe |
Question: | does this fit a miller syncrowave 300 (new style |
Answer: | I have not had a problem with them on 130 amps been using them for a few months now. |
- Fits most all Rotary Tools with a 3/4-12 thread including Black and Decker, Milwaukee, Bosch Dremel and More! (***Package No Rotary Tool/No Drill Included).
- This tool will grind 2 sizes tungsten, 2 angles tips for each size. 4 types holes 1/16" (1.6mm) 15°, 1/16" (1.6mm) 20°, 3/32" (2.4mm) 15°, 3/32" (2.4mm) 20°. 15° is 30° when grinded on tips, 20° is 40°. Each type have 3 holes will grind different circle on diamond wheels, will reduce diamond wheels consumption by 2 times.
- All holes designed to use the same height of diamond wheel. Needn't to set the height again and again. Very easy to install.
- It is very light and convenient, only 87g. But very strong and precise. All holes are stationary, so we can set an offset compensation for each size hole to make sure all tungsten's tip center is on the grinding center point, this offset can ensure that the lines on the tip of the tungsten electrode are as straight as possible. If the hole position is variable, offset compensation cannot be set.
- This tool is essential for real professionals.We know welders, so we know what they need.
User questions & answers
Question: | What size cutoff wheel is required for this attachment? 25mm |
Answer: | If the endcap of the dremmel body unscrews it will probably fit. The desciption section will give the thread size of the adapter so you can verify the compatibility. |
Question: | Will this work on a pneumatic die grinder |
Answer: | Sorry for my wong answer,The insulating rings may not match my CK Torch |
Question: | Hi, I just got mine, how I can grind for the 30deg angles |
Answer: | No, it does not come in a storage case. However, mine came packaged extremely well. The Pyrex cups were each individually wrapped in foam, all threads on the lenses had plastic protective covers, and all components were packaged in small separate bags. |
Question: | Will this fit on my drimmel |
Answer: | Basically there are three common sizes; 1/16. 3/32. And 1/8. The kit shown above should contain all three sized collets etc. I would recommend 2.4 aka 3/32 if you’re only going to get one size |
Product features
P-1
Unscrew top collar on rotary tool,and choose a correct size collet for 1/8" mandrel.Install the angle controller as shown in P-1
P-2
Connect the mandrel with diamond wheel ,and set it in your rotary tool .As shown in P-2
P-3
Adjust the height of the diamond wheel.Screw the collet when you are sure that below of the long window is one the plane as the top face of the diamond wheel.As shown in P-3
Exquisite accessories
- 120-140 Grit, With good hardness, wear resistance and good impact resistance. Sharping system is great to use.
- Can be used with your rotary tool to cut a wide variety of materials.
- CNC machined mandrel swing less when grinding
Frequently Asked Questions
- Q:Does it come with the dremel boody?
- A:No, the product does not include dremel body, or any rotary tools,customers need to buy tools themselves.
- Q:What kind of rotary tool will fit this kit?
- A:It fits most of rotary tools with a 3/4-12 thread,including Black and Decker, Milwaukee, Bosch Dremel and so on.
- Q:How to achieve the higher angles(40° 30°)? Do you need another set of the brass guides?
- A:These angles are the result of the grinding of tungsten.
- Q: Do you support tungsten electrode 3.2Φ?What angles & degrees are supported ?
- A:They're 2 types guide rails:1/16"(1.6mm) , 3/32"(2.4mm) , The degree are 15 ° , 20°.
Please select the appropriate chuck size before installation
IMPORTANT:
According to feedback from some first-time users, if the grinding wheel cannot be aligned with the cut during the installation process, or the grinding wheel does not reach the expected position, it may be that the chuck you are using is too high and exceeds the height of the mandrel installation.
At this time, please replace a chuck with a height not exceeding 34mm, so that the grinding wheel can be adjusted in a proper position.
- [Comfortable Welding Tool] This TIG welding finger feeder will keep your fingers safe and create better quality weld results. You may need such a welding wire feeding pen which is simply rolling the rubber wheel with your index finger, the pencil can provide a precision and consistent feed of TIG rod which can help you better control of welding wire, manual control uniform speed wire, save more time and improve the efficiency of your work and get better welding effect
- [Lightweight TIG Welding Pen] The TIG filler rod feeder pen is an efficient tool when you are doing TIG welding work, which is small and help you hold the welding rod stabilize, and speed uniform. If you usually use 1.0mm-3.2mm or (1/32''-1/8'' in inch) welding rod, this will a good welder accessories which has comfortable grip and perfectly fits the finger, it also lightweight feeder similar as a pen about 0.1 pound weight, very comfortable and anti-slip when using
- [1.0-3.2mm Rod Adapt] This TIG Pen Welding Rod Holder is designed for TIG welding, it can compatible with 1.0mm to 3.2mm welding wire, which is 1/32’’-1/8’’ in inch; It can also use minimum diameter 0.8mm welding wire, but it may has a better use effect over 1.0mm welding rod
- [Aluminum Material] The TIG-pen is made of high grade aluminum, and the TIG welding wire feeder smooth-faced compact and lightweight, we will pack the TIG rod feeder in transparent bag which is convenient for you to carry, find and use
- [Quality after-sale Service] If you are experiencing quality issues or any problems when you receive this tig finger feeder pen, please feel free to contact our customer service in time and let us know the issue. We offer further solution for you to your satisfacation
User questions & answers
Question: | Will this tig pen work with 1/16 and 3/32 inch rods |
Answer: | TIG Welding pen will use 1.0mm-3.2mm or 1/32''-1/8'' in inch welding rod |
Question: | Can it be used with 0.035 rod |
Answer: | yes, 5X 25mm Double Diamond Wheels |
Question: | How dose this Tig pen rod holder use? Does it have variable speed |
Answer: | I would say no, as most pneumatic die grinders do not have a threaded nose on the tool housing. Most of the electric "Dremel" style rotary tools have a female 3/4-12 threaded collar on the nose of the tool housing. The collar holds the two halves of the housing together at the nose bearing. The tungsten holder replaces that collar and remains stationary while the shaft and diamond grinding wheel spin freely inside. I purchased the Chicago Electric rotary tool at Harbor Freight for $25, replaced the collar with this tungsten grinder and it works great. That particular rotary tool is variable speed as well. Perfect angle every time, takes up little space, and I don't have to give up money and space to a dedicated bench grinder. JC |
Question: | What size rod does this tig pen handle |
Answer: | The numbers on the sharpener get multiplied by two; so, if you want a 30 degree point (sharper) then use 15 degree hole. If you want a 40 degree point (more blunt) use the 20 degree hole. Also use the holes that correspond to the size of tungsten you’re trying to sharpen. |
Product description
MAG-MATE Weld Torch Holder Magnet for Tig Torches, 41 lb. Holding base allows for quick, easy placement, made of stainless steel.
- Securely and neatly hold TIG torch in place on top or under work bench or any nearby steel structure
- Prevents damage to torch tips
- Stainless steel holder, plated steel magnetic base
- Magnetic base allows for quick and easy placement and repositioning
- Made in the USA
User questions & answers
Question: | What is the circular foam piece for |
Answer: | I have no clue why they entered the pricing like that. I just placed several different single orders to get around this gross mistake. |
Question: | Does it work with the button cap |
Answer: | Yes, this tig pen will use 1.0mm-3.2mm or 1/32''-1/8'' in inch tig welding rod, it will work well if you use 1/16 and 3/32 rod. |
Question: | Anyone tried this with an Oxy/Acetylene torch |
Answer: | Seems to work well with any size filler rod. |
Question: | Why does 1 single unit cost 18$ and 2 units cost 5times as much |
Answer: | Yes, you just need install the filler material into the TIG pen, and control the speed of the filler material by your finger. Please don't worry about the installation, we had offered instruction manual in the package to show the installation method. |
Product features
Weld Torch Holder with Magnet Base
TIG gun holders with magnetic bases quickly and easily attach to any steel surface in your shop such as the welding table, welding machine and more. The strong magnetic base allows for the TIG torch holder to be positioned in almost any orientation and the versatile design provides multiple option for torch placement in the holder.
Weld Torch Holder with Magnet Base
Attach to a welding table, welding machine and more. The strong magnetic base and versatile design allows for the MIG torch holder to be placed in a variety of locations and orientations.
Securely and neatly hold MIG torch in place on the top, side or underneath of work bench
Keep torch handy and accessible.
Stainless steel holder, plated steel magnetic base
Magnetic base allows for quick and easy placement and repositioning.
Product description
This is a 1/16-inch TIG filler. Designed for use with most types of mild steel. This product is both highly durable and highly fluid. Very resistant to corrosion.
- For most types of mild steel
- Highly durable
- Highly fluid
- Highly resistant to corrosion
- 1/16-inch TIG filler
User questions & answers
Question: | Will the rods come in the plastic tube? One review states his came in one and another customer disappointed his were saran wraped together |
Answer: | I just got my order. It came with 32 rods, all 36” in length. |
Question: | Can this filler rod be used for sheet metal if not what kind can i use |
Answer: | It is so the magnet does not scratch the surface you attach it to. I threw it right in the trash. |
Question: | What is the difference between this product, er70s-6 and er70s-2? coating |
Answer: | Not sure what you mean by “works with the button cap?” This is a very simple product. The base covers a magnet with a screw through the center that can be loosened so the holder top can rotate to accommodate your torch. |
Question: | How many rods are in the 1# listing |
Answer: | It does not seem heavy enough for an oxy/acetylene torch. I would not recommend it. |
Product description
You don't have to sacrifice your fingers for a pretty weld! when welding being comfortable results in the best welds possible. In order to be comfortable you have to protect yourself from heat and get in a steady working position. The tig finger enables you to rest your hand on a work piece without having to worry about the metal heating up and burning your hand. Step up to the next level of tig welding and allow yourself to slide smoothly along hot metal and lay down that perfect bead. The tig finger has become a welding industry standard, allowing welders all over the world to slide smoothly along hot metal, without sacrificing their fingers. Just slip the tig finger over your tig glove and prop right next to the weld. It's like having a prop in your pocket.
- Finish that long pass without burning your fingers
- Pocket size durable design ideal for any tig job
- Increases the lifespan of your tig glove
- Great for hobbyists and industrial welders
User questions & answers
Question: | Is this made of asbestos |
Answer: | Michael, thanks for the question. The Tig Finger is made in-house here at Weldmonger headquarters, so that keeps our costs low and allows us to provide a lower price directly on our website. This "list price" you're seeing from this seller on Amazon for the Tig Finger accounts for a higher asking price that some dealers may deem appropriate (or may actually even charge, in rare cases). The Amazon "sale price" of $14.99 is reasonable compared to The Weldmonger Store when you factor in shipping charges.Hope this helps! |
Question: | What size is this one? I use medium gloves |
Answer: | Mine did not come in a tube but I also ordered some aluminum rods from the same company and they did |
Question: | Can it be used for stick welding pipe |
Answer: | Yes it can . Remember to use a 1/16 tungsten . Remember to spot weld and alternate ends so you don't warp the sheet metal . |
Question: | Why is the "list price" $22.99? Weldmonger lists this item at $11.99 so why is yours nearly double |
Answer: | er70s-6 has more silicon and manganese than -2 resulting in better de-oxidizing properties. also produces a more fluid bead. |
Product features
Welding Tips & Tricks Tig Finger Heat Shield
A Tig Finger is made from extremely heat resistant material and is designed to utilize several layers of heat resistant material to protect your finger from scorching hot metal.So instead of propping on a ball of duct tape, a wood block, or a scrap leather glove, just put on a Tig Finger and prop wherever you like.Anyone who has ever Tig welded Aluminum knows how hot it gets. Its hard to prop without burning your fingers.A tig finger lets you prop anywhere.
- 【★TIG&ARC Strong Point】:Inverter frequency up to 100KHZ, the welding speed is fast, the welding process is the best.This is optimized to deliver a flawless weld, making spatter and post-weld cleanup almost non-existent。rated input frequency 50/60Hz, duty cycle 80%,improves the performance of the welding machine( Can't weld aluminum)
- 【★Feature】:TIG/ARC 2-in-1, Welder Size 37cm*15cm*26cm Tig& ARC Welder with tig torch, earth clamp, electrode holder,Welding tong
- 【★Portable And Powerful】 :TIG Welding thickness 0.3-4.8mm,Stainless steel, Alloy steel, Mild steel, Copper, Cast Iron and Chrome.ARC Welding thickness 15-42mm
- 【★Energy Saving】Portable handle makes it easier to operate, the lightweight makes it more convenient to carry。Suitable for stainless steel, alloy steel, carbon steel, copper, copper alloy and other non-ferrous metal welding
- 【★Warranty and Support】 : 2 years manufacturer's warranty,7*24 hours online service, any requests will be answered within 24 hours. Accept returns within 30 days. 2 years warranty,please submit registration form on our website.Soudeur soldador.Tig&Arc Inverter Welding Machine For Stainless Steel, Alloy Steel, Carbon Steel, Copper, Copper Alloy and Other Non-Ferrous Metal Welding Use Gas
User questions & answers
Question: | Is gas delay for finishing welds |
Answer: | General household for welder |
Question: | What is the size and thread pitch of the argon fitting |
Answer: | it is 110V&220V arc welder |
Question: | Can i use another tig gun instead of the one if comes with |
Answer: | yes,it can |
Question: | have 220 V & 110 V available for this stick welder |
Answer: | It is hot start. Amperage can be adjusted according to your application( meaning depending on the material to be welded and the size of the electrode). U just welded with 3/32 elextrode and it did an outstanding job. It melted the electrode beautifully. ( Hola Cindy. You have to hire me as a reviwer of your welders). I am an independent user |
Question: | So what size wire and breaker do you need to run to run this unit |
Answer: | You can only AFTER you convert it to gas and use CO2 |
Question: | Is this a welder or a plasma cutter |
Answer: | Noh |
Question: | can you run this welder of a regular 5000 watt generator |
Answer: | This is a 70 amp out put. This is gasless only . Use flux core wire .035 |
Question: | if this has hot start, what percent of the Amp setting it's set at? Arc Welding machine |
Answer: | The output range is 35-88 amps, but the recommended output is 70 amps at 20%. |
Question: | Can I weld aluminum |
Answer: | Hi, Dear could you confirm you are asking for MIG welders or C02 regulator ? our mig welders MIG150 and MIG175 both are 220V without 120v, but other plasma cutter CUT50D with dual voltage. hope it can help you. |
Question: | stas soldadora necesita gaso trabajas Sin ganas |
Answer: | If hose doesn't push onto barbed fitting tightly then yes replace fitting. Why such a big hose? |
Question: | What is the difference between this one and Pro Core |
Answer: | Although no gas is required, an Argon/CO2 mix will reduce spatter |
Question: | What is the maximum amperage output |
Answer: | yes it will work without any gas |
Product features
Lincoln Electric K2278-1 Handy Core
The Handy Core wire feeder welder from Lincoln Electric is a tremendous asset when home repair or hobby projects are in your game plan. It's a great pick for welding 18 gauge to 1/8" mild steel and comes with everything you need to get started fast. This package sports a gun and cable assembly, work lead, work clamp and input power cable – all attached at the factory to save you time. A spool of self-shielded, flux-cored wire electrode, welding handshield, and chipping hammer/brush round out the line up. So, don't delay – add the Handy Core to your tool shed or garage today!
- 35-88 amps output.
- Welds up to 1/8 in. mild steel.
- Plugs into household 115V, 20 amp outlet.
- Cold contactor safety feature keeps welding wire electrically “cold” until gun trigger is pressed.
- Compact, portable, lightweight and easy to use.
WELDER
Feature:
1 Energy-saving and stable heat dissipation :Whole day welding is no problem,energy-saving design,it is applicable for welding all kinds of ferrous metals such as carbon steel, medium carbon steel and alloy steel amongst others
2 IntuitiveFeaturing controlling knob,convenient:Portable size but big power,it's not just a welding machine but a work of art.
3 Suitable for welding stainless steel, mild steel and other metal materials. Arc welding machine is easy to use,beginner can also operate well.
4 Over-heating protection, over-voltage protection, over-current protection.The welding voltage can be continue adjusting to exactly match welding current.
5 Convenient quick connection for the output makes it quick, safe, simple.On-off frequency is out of audio frequency,nearly abate the noise pollution
Special welding dynamic characteristic control the circuit,stable welding arc
Little spatter,good welding surface,high welding efficiency
ARC WELDING MACHINE
The machine is equipped with high-efficiency and low-cost cutting technology, can be widely used in automobile manufacturing, plumbing work, metal processing ,strict construction work, site work, high-quality welding and thin material precision welding.
HIGH EFFICIENCY FAN
High-performance fully mute fan motor with instant cooling function, promote body heat dissipation, The synchronous control system provides protection mechanisms.
Portable Design Welder
Before Use:
Check and confirm the initial and secondary line wiring is correct, the input voltage conforms to the welding machine nameplate, after the power supply, no contact with the live part of the primary circuit. Protective covers must be provided at the primary and secondary connections.
During Use: When moving the welding machine, the power supply should be cut off and the welding machine shall not be moved by dragging the cable.
When a sudden power failure occurs in welding, the power shall be cut off immediately.
After Use: After the operation, clean up the site, cut off the electricity supply, lock the box. Check the welder once a month.
Tig&&Arc Welder
1*TIG/Stick/ARC Machine Professional
1*TIG Torch Gun
1* Electrode Holder
1* Electrode Clamp
1*220V Plug
1*110V and 220V Transfer Plug
1*Instruction Manual.
13*As Pictures
Latest Reviews
View all
Paddling Pools
- Updated: 15.01.2023
- Read reviews

Hummingbird Food
- Updated: 08.07.2023
- Read reviews

Cuisinart Dutch Ovens
- Updated: 02.06.2023
- Read reviews

Teen Boy Gifts
- Updated: 12.06.2023
- Read reviews

Golf Training Aids
- Updated: 10.07.2023
- Read reviews