13 best lincoln welder helmet

Product description

The Lincoln Electric Viking 3350 auto-darkening welding helmet (generation 4) is the ultimate blend of comfort, productivity and optics. The one of a kind X6 Headgear contours to the head to establish 6 contact points which distribute weight, eliminate pressure and provide a personalized fit for maximum comfort. While low-profile external grind button allows you to quickly switch from weld to grind mode, significantly reducing downtime. These new features are coupled with our industry leading auto-darkening lens platform. Our exclusive 4C lens technology creates a crystal clear, true color view of the arc and puddle to enhance your control and increase weld quality while reducing eye strain. Additionally, all VIKING welding helmets have a 1/1/1/1 optical clarity rating which showcases the absence of common lens imperfections such as blurriness and distortion while also providing consistent brightness and performance at an angle. While the quality of the auto-darkening lens is critical, the size is also an important attribute to consider. The 3350 series features an extra-large 12.5 square inch viewing area.The 4th generation of VIKING 3350 Series welding helmets is here and is available in over 15 different styles to provide professional performance and appeal which stands out from the crowd. Specifications: Optical Clarity: 1/1/1/1 | Shade Range: 5-13 | Viewing Area: 3.74" x 3.34" (12.5 Square Inches) | Switching Speed: 1/25,000 Sec. | Number of Arc Sensors: 4 | Outside Cover Lens: 4.5 x 5.25| Controls: Shade, Sensitivity & Delay | Modes: Weld, Cut, Grind | TIG Amp Rating: 2 Amps | Power Source: CR 2450 Battery + Solar Cell | Hard Hat Compatible: Yes | Cheater Lens Compatible: Yes | Standards: ANSI Z87.1, CSA Z94.3, EN379| Warranty: 3 Years Whats Included: Comes with helmet bag, bandana, 5 outside cover lenses, 2 inside cover lenses and sticker sheet.

• · PREMIUM OPTICS – The 3350 Series features the exclusive 4C lens technology which creates a crystal clear, true color view of the arc and puddle. This enhances your control and increases weld quality while reducing eye strain. Additionally, the 3350 series lens has a 1/1/1/1 optical clarity rating which showcases the absence of common lens imperfections such as blurriness and distortion while also providing consistent brightness and performance at an angle.
• ·  EXTRA LARGE LENS - The 12.5 square inch auto darkening lens provides a large field of view to offer enhanced application versatility, increases productivity and also has added safety benefits.
• · SUPERIOR COMFORT - The one-of-a-kind X6 Headgear contours to the operator’s head to evenly distribute weight across six key contact points. This improves balance, eliminates pressure points and provides a personalized fit for maximum comfort.
• ·  INCREASES PRODUCTIVITY - Innovative low-profile external grind button allows you to quickly switch between weld and grind modes without having to remove the helmet or your gloves.
• ·  3 YEAR WARRANTY – Comes with hassle free 3 year warranty from your date of purchase to protect your investment.

User questions & answers

Question:	Can i put a magnifying lens in this lincoln electric viking 3350 helmet
Answer:	No, 2 on the top above the lens and 2 on the bottom below the lens. In the picture the 4 spots near each corner is the sensors.
Question:	Anyone know what hearing protection (ear muffs) will fit with this helmet? And any respirator that will work fit this helmet
Answer:	The main part is the lens which has a 2 year warranty from the Serial number stamped on the lens itself, or a receipt. The rest as its working parts (shell, headgear, lens covers) are just your standard 30-90 day warranty.
Question:	In the pictures it shows multiple different designs but there is nowhere to select which one. Only give option to buy the black. Is there any others
Answer:	this is not rated for overhead welding. you would need a fiber glass helmet.
Question:	How well is this helmet under the sun? Cause i do most of welding out under the sun
Answer:	In your manual it will state the options, if looking for a quick reference the part number for a Lens cover replacement kit is : 770858

Product description

Welding Helmet, Lens Shade 9 to 13, Graphics Yes, Color Black, Plate Height 4-1/2 In., Plate Width 5-1/4 In., Viewing Area 4-1/2 In. x 5-1/4 In., Headgear Ratchet, Material Plastic, Grind Mode Yes, Number of Arc Sensors 2, ADF Controls Auto-Darkening Filter, Power Source Battery and Solar, Battery Type AAA Alkaline, Battery Life 3000 hr., Electromagnetic Sensor No, TIG AMP Rating 8A, Switching Speed 1/25, 000 sec., Features Light Weight Shell, Includes Extra Front Cover Lens

User questions & answers

Question:	How big is the lens
Answer:	i have run 3 together for parties on higher settings for over 5 hours and not killed a 20lb tank. its our most efficient burner. i'd think 6-8 hours easily and more than 10 if not trying to burn 3' high flames. you'll love it i promise and if you dont, send it back.. my favorite of our kits!
Question:	Will this work with prescription glasses
Answer:	https://www.amazon.com/dp/B0778R95CK?ref=myi_title_dp
Question:	Is it available in plain black
Answer:	These flame way above the top of the torch providing your gas supply is good. We had snuffers attached with a chain and they burnt thru the chain in about 30sec the first time lit. They are pretty impressive. We have 4 across our 20x40 patio and it provided enough light to play cornhole
Question:	Does it have a grinder mode
Answer:	The torch should work with out that part. That is a defuser I believe. Helps as well when windy! Love these torches best investment ever, just wish I had 2 more on other side of the pool I like them so much! A little piece of Hawaii in Upstate NY!

Product description

• Beanie for protecting the top of the head from welding spatter and heat
• Made of cotton for breathability
• Made of 9 ounce flame-resistant material
• Cushions helmet for additional comfort
• Large, fits hat size 7 to 7-3/8

User questions & answers

Question:	will it fit a 7 5/8 head
Answer:	yes, like most wick source flames, we can pull out more for a larger flame and pull it down for a smaller flame. the fuel you use will also affect the size of the flame. we are now using/making our own alcohol based fuel to reduce the amount of black smoke (which was quite a bit with 8 torches going in our yard); the alcohol flame is less robust than when using Tiki fuel, but we just made the wick longer and it was fine. our smog problem is pretty much gone now too.
Question:	Will it fit 7 1/2 head
Answer:	When Dr. Frankenstein was performing experiments on the dead in his castle above our village, we used these. Unfortunately, the fuel oil at that time didn't burn as brightly as it does now, nor did we have the ability to use citronella scented torches at that time. Whether or not citronella can ward off Frankenstin's Monster can therefore only be conjectured.

Product description

The Lincoln Electric Viking 2450 auto-darkening welding helmet (generation 4) is a premium blend of comfort, productivity and optics. The one of a kind X6 Headgear contours to the head to establish 6 contact points which distribute weight, eliminate pressure and provide a personalized fit for maximum comfort. While low-profile external grind button allows you to quickly switch from weld to grind mode, significantly reducing downtime. These new features are coupled with our industry leading auto-darkening lens platform. Our exclusive 4C lens technology creates a crystal clear, true color view of the arc and puddle to enhance your control and increase weld quality while reducing eye strain. Additionally, all VIKING welding helmets have a 1/1/1/1 optical clarity rating which showcases the absence of common lens imperfections such as blurriness and distortion while also providing consistent brightness and performance at an angle. While the quality of the auto-darkening lens is critical, the size is also an important attribute to consider. The 2450 series features a large 9.3 square inch viewing area.The 4th generation of VIKING 2450 Series welding helmets is here and is available in over 6 different styles to provide professional performance and appeal which stands out from the crowd. Specifications: Optical Clarity: 1/1/1/1 | Shade Range: 5-13 | Viewing Area: 3.82 in x 2.44 in" (9.3 Square Inches) | Switching Speed: 1/25,000 Sec. | Number of Arc Sensors: 4 | Outside Cover Lens: 4.5 x 5.25| Controls: Shade, Sensitivity & Delay | Modes: Weld, Cut, Grind | TIG Amp Rating: 2 Amps | Power Source: CR 2450 Battery + Solar Cell | Hard Hat Compatible: Yes | Cheater Lens Compatible: Yes | Standards: ANSI Z87.1, CSA Z94.3, EN379| Warranty: 3 Years Whats Included: Comes with helmet bag, bandana, 5 outside cover lenses, 2 inside cover lenses and sticker sheet.

• PREMIUM OPTICS – The 2450 Series features the exclusive 4C lens technology which creates a crystal clear, true color view of the arc and puddle. This enhances your control and increases weld quality while reducing eye strain. Additionally, 2450 Series lens has a 1/1/1/1 optical clarity rating which showcases the absence of common lens imperfections such as blurriness and distortion while also providing consistent brightness and performance at an angle.
• LARGE LENS - The 9.3 square inch auto darkening lens provides a large field of view to offer enhanced application versatility, increases productivity and also has added safety benefits.
• SUPERIOR COMFORT - The one-of-a-kind X6 Headgear contours to the operator’s head to evenly distribute weight across six key contact points. This improves balance, eliminates pressure points and provides a personalized fit for maximum comfort.
• INCREASES PRODUCTIVITY - Innovative low-profile external grind button allows you to quickly switch between weld and grind modes without having to remove the helmet or your gloves.
• 3 YEAR WARRANTY – Comes with hassle free 3 year warranty from your date of purchase to protect your investment.

• Great For TIG MIG MMA, Plasma Applications with Grinding Feature
• Super Large Viewing Size 3.93"X3.66" with 4 Premium Sensors
• Better clarity, True color view - 1/1/1/2 Optical Clarity
• Increased battery life
• Superior comfort with the pivot style headgear

User questions & answers

Question:	How far should this helmet be from the arc of a flux weld, to weld safely
Answer:	Si viene completo listo para usar
Question:	What's the difference in fit between eh-091x and the lyg-m800h? any performance differences
Answer:	Hi, The batteries can not be replaced
Question:	Why did you cancel my order without any warning? Been waiting on this to come for Christmas
Answer:	No, it doesn’t, comes with standard lens
Question:	What shade setting should I put it on to arc weld thank you
Answer:	Hi, No, this one can't fit over a hardhat

Product features

LYG-M800H

The True Color Technology upgrade to YESWELDER welding helmets – improves visibility and reduces eye strain by minimizing the traditional lime green coloring in the helmet view screen.

Better Clarity, Real Color View

Now you can make a good view even better. Upgrading the welding helmet with True Color technology preserves the existing 1-1-1-2 optical clarity rating, but improves visibility by reducing the lime green tint.

Wide-Screen View

True Color technology enables you to not only see better, but also see more.

The 3.93"X3.66" large viewing area gives you a full range of vision in relation to the welding area, which enhances operator control

Comfortable Headgear

Headgear with oversized comfort cushion provides extensive adjustability,settings, and improved support for better fit and comfort.

Product description

A rugged light weight helmet with comfortable headgear, and an oversized absorbent sweatband for those long days under the helmet. Includes 2 extra inside and outside impact resistant clear lenses. Processes stick, TIG, pulsed TIG, mig, pulsed mig, flux-cored, Gouging.

User questions & answers

Question:	What size is the helmet
Answer:	Hard to answer. I haven't used them much. Love the idea but the flame I get from these is not good. The flame is so small (even with the wick out about two inches) is insufficient to keep bugs away.
Question:	Es de carga solar
Answer:	I've only had one bottle break and I think it might of already had a Crack in the top. Brass part does get hot but not enough to break the bottle unless it's thin glass.
Question:	does this have a kind mode, visible grinding
Answer:	Huh?? How many feet tall are they? Ok here's some 3rd grade remedial math for YOU to calculate (that's math lingo for "to figure out") your question. Take the height they say in the ad which is 66". (that " funny looking symbol means inches) and divide it by 12. If you remember there is 12" (inches) in 1 foot. So now here's the hard part. Without a calculator put 66 over 12 meaning divide 66 into 12. Never mind,...whoever asked that question would definitely be using a calculator, so type in (wait, turn it on first) ok start over. Type in 66, then press the divide sign. That's the one that has a horizontal line with a dot on top of the line and another below. Now here's the big important step. Next you press this sign,( = ). That's the special button that makes you the answer. After pressing that button your answer will be 5.5. So that's feet and, well here's another tricky part for you. The ( .5 ) means a half. So the Final Answer is that the torch is... FIVE and ONE HALF FEET TALL or also said as... FIVE and a HALF FOOT TALL. I hope this helps you out and it didn't blow your mind.
Question:	How many sensor’s does this helmet have
Answer:	Thank you.....in 2013 there was no video..Or pic with cover.

Product description

Lincoln Electric Cheater Lens | 2. 00 Magnification | 2" Height x 4. 25" Length | Compatible with most Welding Helmets | KP3046-200

• 2. 00 DIOPTER - Magnification power of lens
• LIGHTWEIGHT - Compact 1 oz design to maintain comfort when added to welding helmet
• DURABLE - Polycarbonate design to prevent cracks and improve durability while lowering weight
• Compatible with all Lincoln Electric VIKING welding helmets and also most competitive models

User questions & answers

Question:	What’s the power? Daaaa
Answer:	K3419-1, is Gloss Balck Thank you
Question:	do these fit
Answer:	Yes it has grind mode and ite very easy to operate
Question:	These are just the standard generic 4.25x2 lenses right
Answer:	Olive oil will put itself out due to a high flash point, so probably not good with this wick.
Question:	How do you know which way to install lens in helmet ? Front
Answer:	I think they may be refering to the lenght of the wick as its about 12-13 inches long otherwise no

Product description

Lincoln Electric Split Leather Helmet Bib with Press Fit Seal | Compatible with Most Welding Helmets | KP3729-1

• NECK PROTECTION - Durable split leather construction protects the neck from arc flash, spatter and sparks
• INNOVATIVE CONNECTION - Unique press fit silicone seal easily attaches to the welding helmet edge for full frontal neck coverage
• DURABLE - Kevlar stitched seams with hemmed edge to prevent rips or tears
• COMPATIBLITY - Use with all Lincoln welding helmets and most competitive models

Product description

Helmet inventor black

• Polyamide Nylon
• Large 9.3- square-inch viewing area with wide screen frmat provides improved visibility
• Four independent arc sensors provides dependable arc detection
• Grind mode prevents lens from Darkening for clear, visible grinding

User questions & answers

Question:	are all 4 arc sensors located across the top of the lenses assembly
Answer:	Yes
Question:	How long is the warranty
Answer:	Contrary to the previous answers, some models ARE solar powered and some are solar powered with battery backup, and I'm not referring to the photo sensors that trigger the auto darkening. If yours has a battery door it is battery backup, no battery door means it is solar powered only(the solar power will charge an internal battery). Charging in direct sunlight might be excessive. An indoor light will do. Turn the helmet off by putting it in grinder mode when charging. If you want to test it, turn the helmet on(not in grinder mode) and point a tv remote at the sensors on the front and press and hold down one of the buttons on the remote. The IR light from the remote will trigger the auto darkening.
Question:	Is this rated for overhead welding
Answer:	Absolutely it adjusts to fit s
Question:	where can i find replacement lens covers for this hood
Answer:	I returned mine because the lens was all scratched when I got it. But no, I don't think there is a grind setting on this one. I believe there was just the normal darkness knob on the outside - all too dark to grind

Product features

Hobart 770890 Auto-Darkening Welding Helmet

The Inventor Series Helmet from Hobart has a viewing are as wide as 9.3 square-inch that gives end-to-end visibility while welding.

Enabled with multiple wide sensors

The helmet consist of four independent arc sensors provides status, position and geometry of the weld that is supposed to take place on the workpiece.

Special feature to prevent darkening

To avoid darkening of the scree, the helmet is enabled with a Grind Mode for visible Grinding.

Product description

Lincoln Electric VIKING 3 Point Ratchet Headgear for Welding Helmets KP4100-1

• COMFORT - Designed to provide three primary points of contact (Front, Top & Back) to distribute weight evenly
• EASY TO USE - Easily adjustable headbands for optimal fit and comfort
• Compatible with VIKING 3350, 2450, 1840 and 1740 Series Welding Helmets

• Great For TIG MIG MMA, Plasma Applications with Grinding Feature
• Super Large Viewing Size 3.93"X3.27" with 4 Premium Sensors
• Better clarity, True color view - 1/1/1/2 Optical Clarity
• Increased battery life
• Superior comfort with the pivot style headgear

User questions & answers

Question:	Head restraint broke after a couple uses. i have left poor review, emailed manufacturer. no return option available on amazon. help
Answer:	Ask the question differently I am not sure what you are asking. I am a welder of 36 yrs experience
Question:	Will the Lincoln bucking head gear work in this helmet
Answer:	Si viene completo listo para usar
Question:	I got a helmet from you before ,but the headgear it's broken . Do you sell just headgear
Answer:	Hi, The batteries can not be replaced
Question:	Does this helmet work with eyeglasses
Answer:	No, it doesn’t, comes with standard lens

Product features

LYG-M800D

The True Color Technology upgrade to YESWELDER welding helmets – improves visibility and reduces eye strain by minimizing the traditional lime green coloring in the helmet view screen.

Better Clarity, Real Color View

Now you can make a good view even better. Upgrading the welding helmet with True Color technology preserves the existing 1-1-1-2 optical clarity rating, but improves visibility by reducing the lime green tint.

Wide-Screen View

True Color technology enables you to not only see better, but also see more.

The large viewing area gives you a full range of vision in relation to the welding area, which enhances operator control

Comfortable Headgear

Headgear with oversized comfort cushion provides extensive adjustability,

settings, and improved support for better fit and comfort.

Product description

Tekware Large Viewing True Color Solar Powered Auto Darkening Welding Helmet

-The True Color Technology welding helmets enables you to not only see better, but also see more. improves visibility and reduces eye strain by minimizing the traditional lime green coloring in the helmet view screen.



-The large viewing area with (DIN5,non auto-darkening) SIDE VIEW gives you a full range of vision in relation to the welding area, which enhances operator control.



Why the Tekware Welder Mask is the right choice for you?



✓Better Clarity & Real Color View

Upgrading the welding helmet with True Color technology preserves the existing 1-1-1-2 optical clarity rating, improves visibility by reducing the lime green tint.



✓Wide-Screen View

True Color technology enables you to not only see better, but also see more. The large viewing area with (DIN5,non auto-darkening) SIDE VIEW gives you a full range of vision in relation to the welding area, which enhances operator control.



✓Comfortable Headgear

Headgear with oversized comfort cushion provides extensive adjustability, settings, and improved support for better fit and comfort.



Specifications

Materials: PP/PA

View Area: 3.94'' x 3.27''/100 x 83mm

Side View Area: 4.3/1.96 x 4"

Optical Class: 1/1/1/2

Light States: DIN 4

Dark States: DIN 5~9/9~13

Response Time (Bright to Dark): ≤1/10000 Seconds

UV/IR: DIN 16

Meet Standards: ANSI Z87.1/EN379 CE/CSA Z94.3

Battery Type: Solar Cell + Replaceable CR2450 Battery (Included)



※New Version※ Package Includes

1 x Welding Hood

1 x Adjustable Headband

1 x User's Manual

3 x Replacement Outside Shield

2 x Replacement Inside Shield

1 x Helmet Storage Bag

1 x Replacement Battery CR2450

• ✓Great For TIG MIG MMA, Plasma Applications with Grinding Feature
• ✓Large Viewing Size 3.94"X3.27"With SIDE VIEW(DIN5,non auto-darkening) ,4 Premium Sensors
• ✓Better clarity, True color view - 1/1/1/2 Optical Clarity
• ✓Increased battery life
• ✓Superior comfort with the pivot style headgear

User questions & answers

Question:	Is the blue flames stickers of painted on
Answer:	I would have to say it would I wear 7-3/8 and it fits fine, it has a small bungee on the back to allow for some stretch.
Question:	Can i use this with smaw
Answer:	I really doubt it., It's tight on my 7 &3/8.
Question:	How do you change out the clear protective lens on the glow in the dark spider helmet
Answer:	LCD VIEWING AREA IS 3.82 x 1.73 inches.
Question:	replaceable lens
Answer:	Yes. There is plenty of clearance when the mask is closed.

Product description

This portable, air-cooled spot welder makes quick, strong spot welds in a wide range of materials including steel and cast iron. Welds uncoated mild, galvanized or stainless sheet steel. The spot welder has 6 in. tongs lock firmly onto materials.

Features:

• Single Phase Design - Easily weld together different types of materials with the single phase design. Simple welding mechanism allows you to quickly insert the materials and press to weld
• Portable Design Machine - The attached handle allows you to quickly transport your spot welder to different job locations quickly
• Durable Welding Tips - Welding tips are constructed from high quality steel to get the perfect weld for materials that have a thickness
• Replacement Tips - Spot welder comes with extra pair of welding tips for multiple uses. Simply twist the tips off when they are ready to be replaced and screw on the new one
• Simple Lever Function - To perform welding applications, simply apply pressure and press down on the lever

Specifications:

• Type: Spot Welder
• Voltage: 240
• Outlet Voltage: 2.5 kVA @ 50% Duty Cycle
• Amp: 16
• Throat Depth: 6"
• Weldable Materials: Uncoated mild, galvanized, or stainless sheet steel
• Mild steel: up to a combined thickness of 1/8" sheet steel
• Overall Dimension: 18-1/2"(L) x 4-1/2"(W) x 7-1/2"(H)

Package Content:

• Spot Welder

• Single Phase Design - Easily weld together different types of materials with the single phase design. Simple welding mechanism allows you to quickly insert the materials and press to weld
• Durable Welding Tips - Welding tips are constructed from high quality steel to get the perfect weld for materials that have a thickness
• Replacement Tips - Spot welder comes with extra pair of welding tips for multiple uses. Simply twist the tips off when they are ready to be replaced and screw on the new one
• Simple Lever Function - To perform welding applications, simply apply pressure and press down on the lever
• Portable Design Machine - The attached handle allows you to quickly transport your spot welder to different job locations quickly

User questions & answers

Question:	can i use this to weld iron
Answer:	I would say the short answer is no. This spot welder is for mild steel/sheet metal etc. with a maximum thickness of approx 1/8"- 3/16"
Question:	Saludos... cual podria ser la capacidad del generador electrico para utilizar esta herramienta sin problemas
Answer:	Duty cycle is not a problem.
Question:	can you buy longer tongs to increase depth
Answer:	Absolutely yes. The rings are removable and can be changed out for other tongs. When using longer tongs, pay close attention to the alignment of the tips to get a quality spot weld.
Question:	Can this machine be used with 110v or 220v only
Answer:	They offer both a 110 and a 220 v make sure when u purchase order correct voltage.. Keep in mind a 220 v works much better and will work harder than a 110v . It's definitely worth putting a 220v line in ur garage rather than trying to just barely get by on 110v unit
Question:	What is included in this kit? Any additional accessories needed prior to using it
Answer:	extra welding tips that match the OD of the wire you use
Question:	Come with gauges for gas
Answer:	Yes, has guages for Argon/CO2 gas
Question:	Where is the welder made
Answer:	I would imagine it’s sourced from components all over the world. I’ve owned Everlast tig welder and I ended up buying Miller 215 because I wanted stick welding. It is very good mig and burns 7108 3/32 beautifully
Question:	Does this work with 230V/50Hz
Answer:	This machine will work with 230V/50Hz power.