12 best 3m hose nozzles

Product description

The 3M Performance Industrial Spray Gun System Kit includes: One 3M Performance Spray Gun, six gravity atomizing heads (one each of size 1.2, 1.3, 1.4, 1.6, 1.8, 2.0), six pressure atomizing heads (two of each size 1.1, 1.4, 1.8), one locking collar, one pressure whip, one air control valve, one 3M PPS Series 2.0 standard size mixing cup (22 ounce), five 3M PPS Series 2.0 standard size disposable liners, 4 standard size disposable lids (200 micron filter), one standard size disposable lid (125 micron filter) and three sealing plugs.A spray gun is more than just a gun when it can help you improve your bottom line. The 3M Performance Spray Gun is the industrial coating solution that can help reduce variability in your process and boost productivity by giving technicians a smarter way to spray. Ditch the old systems – the high-maintenance metal guns that require more fuss than they’re worth – and start putting productivity and performance back into painting.Lightweight and easy to use, the 3M Performance Spray Gun was built with the industrial painter in mind. Made from an advanced impact-resistant composite material, the spray gun is one of the lightest in the industry yet durable enough for the toughest industrial conditions. From the trigger to the body, the spray gun was optimized by kinesiologists to enhance comfort specifically for the high demands of all-day spraying.With its versatile design, technicians can spray from either a pressurized source or a gravity cup. The pressure-fed hose and nozzles allow for continuous bulk spraying for larger jobs. Or for spot repairs and small areas, convert the spray gun to use the 3M PPS Series 2.0 Spray Cup System – so you use just the right amount of coating to match the size and finish of the job.Simple, innovative design means fewer parts to maintain. With quick-change replaceable nozzles, paint never passes through the body of the spray gun. Cleanup can be as simple as wiping the tip of the needle and replacing the head – which means no more disassembling or soaking in solvent. It’s like getting a brand-new spray gun every time you put on a fresh nozzle. At sizes from 1.1 to 2.0, 3M Performance Atomizing Heads allow you to easily spray a wide range of coatings – from stains and primers to topcoats and even adhesives. The spray gun’s intuitive design means it’s ready to help technicians spray right out of the box – whether you’re a seasoned pro or if it’s your first day on the job.

• KIT INCLUDES: 1 Spray Gun, 6 Gravity Atomizing Heads, 6 Pressure Atomizing Heads, 1 Locking Collar, 1 Pressure Whip, 1 Air Control Valve, 1 PPS 2.0 Standard Size Mixing Cup with 5 Liners and 5 Lids, 3 Sealing Plugs
• LIGHTWEIGHT AND DURABLE: 1 of the lightest spray guns in the industry, impact-resistant composite body built to withstand demanding industrial environments
• VERSATILE: Convert between pressure hose for continuous, bulk spraying or 3M PPS Series 2.0 Spray Cup System for spot repair or small jobs
• SPRAY A WIDE RANGE OF COATINGS: Including stains, primers, basecoats, topcoats, clearcoats, adhesives
• COMFORTABLE: From the body to the trigger, this spray gun was optimized by kinesiologists to enhance comfort
• LOW MAINTENANCE AND EASY TO USE: Simple, intuitive design means fewer parts to maintain or rebuild and can help achieve more consistent performance whether you’re a beginner or a pro
• REPLACEABLE NOZZLE: With quick-change replaceable atomizing heads, paint never passes through the body of the spray gun, it’s like getting a brand-new spray gun with every nozzle

User questions & answers

Question:	What are the cfm ratings for this gun
Answer:	Yes.
Question:	This seems to be a extremely wasteful system. Are the nozzles disposable
Answer:	It works with both their electric power head and gas power heads. I use it with the xux01z. The single battery power head might be a little underpowered for setting the head to max depth.

Product description

Steel (SS 304) and PVC Wire Braided Hose 10 feet (3m) and is suitable for DEF/Urea/AdBlue Allows you to transfer fluids without any spills Works great with the Lumax Diaphragm Pump Kit (LX-1362 and LX-1382) Ideal for DEF/Urea/AdBlue pump kits Lumax is a manufacturer of lubrication and fluid management products Our products including grease guns manual and electric pumps funnels drains grease fittings filter wrenches and accessories are built to the highest standards and incorporate many proprietary features Lumax's mission is to provide professionals and consumers with innovative and high-quality products to get the job done right Product development at Lumax goes beyond the physical product to a deeper understanding of the end-users' needs Engineered with the "user-in-mind " Lumax products are built to the highest standards and incorporate many unique features that make work easier faster and cost-effective We have a passion for the design process We listen to our customers and their ever-expanding requirements Our unique products lead the field in design quality and performance

• Uses Suitable for DEF/Urea/AdBlue
• Construction Stainless Steel (SS 304) and PVC
• Ideal for transferring fluids
• Used in Lumax Pump Kits
• Lumax Pump Kits LX-1362 & LX-1382

Product features

Lumax LX-1368 Wire Braided Hose 10 ft.

Construction: Stainless Steel (SS 304) and PVC. Works with The Nozzle Kit (LX-1367)

Product description

Scotch(R) Filament Tape 8915 is a clear polypropylene backing reinforced with glass yarn filaments with a synthetic rubber resin adhesive.

• Synthetic rubber adhesive bonds firmly to a wide variety of application surfaces.
• Appliance, electronics, general industrial, metal working and glass manufacturing.
• Clean removal, filament reinforced strapping tape, shipping, holding, securing, keeping closed and stabilizing.

Product description

COMPRESSOR: 1 year warranty Oil Free Design Auto-Shut off at 57 psi (4 bar); Auto-Start at 43 psi (3 bar) Compressor Regulator: 0-100 psi (0-7 bar) - Equipped with Filter and Gauge 3L air tank to provide consistent air flow (no pulsations) 6 foot power cable 1/6 HP 110 Volt Air Flow: 20-23 L / Minute Noise Level: 47 dB / 1m User Manual 1/8" connection On/Off Switch Suction Cups on bottom for added stability Airbrush: GSI Creos Mr. Airbrush Procon Boy FWA Platinum Double Action 0.2mm PS-270 Airbrush made in Japan (used to be Gunze). Double action gravity feed airbrush with needle travel adjustment and built-in air valve. Advanced detail airbrush for modeling, illustration, and other airbrushing projects. 4-part head system for perfect airflow and easy cleaning. 0.2mm nozzle 10 ml gravity cup Handle with needle adjustment for better control Air valve (MAC) for air pressure adjustment right on the airbrush Air hose included. Standard 1/8” connector will fit Iwata, Sparmax or Master airbrush hose, any standard 1/8” quick coupling can be used with this airbrush. Hose: 1/8" - 1/8" Braided Air Hose by NO-NAME Brand Length: 3m Diameter: 7.5x2.5mm Fittings: 1/8" Paint: Wicked Primary Set Item # W101-00 Contains 2oz. each: W030 Opaque White, W002 Black, W003 Yellow, W007 Blue, W005 Red, 4012 High Performance Reducer

• Airbrush: GSI Creos Mr. Airbrush Procon Boy FWA Platinum Double Action 0.2mm PS-270
• Hose: 1/8" - 1/8" Braided Air Hose by NO-NAME Brand
• Compressor: 3 Liter air tank with 1/6 HP motor for quiet and continues work with any airbrush up to 0.7mm nozzle size!
• 1 year warranty. Service center in Florida with a team of airbrush enthusiasts.
• New product to Amazon - check our awesome reviews on YouTube

Product description

Nozzle Kit comes with Manual Nozzle (LX-1364) and 10 ft. (3 m) Wire Braided Hose (LX-1368) and is Suitable for DEF/Urea/Ad Blue. Manual, Adjustable Trigger Construction: Polypropylene and Stainless Steel Nozzle Kit. PVC Wire Braided Hose, 10 Ft. Lumax is a manufacturer of lubrication and fluid management products. Our products, including grease guns, manual and electric pumps, funnels, drains, grease fittings, filter wrenches, and accessories, are built to the highest standards and incorporate many proprietary features. Lumax's mission is to provide professionals and consumers with innovative and high-quality products to get the job done right. Product development at Lumax goes beyond the physical product, to a deeper understanding of the end-users' needs. Engineered with the "user-in-mind, " Lumax products are built to the highest standards and incorporate many unique features that make work easier, faster and cost-effective. We have a passion for the design process. We listen to our customers and their ever-expanding requirements. Our unique products lead the field in design, quality, and performance.

• Suitable for DEF/Urea/Ad Blue
• Manual, Adjustable Trigger Construction: Polypropylene (PP) and Stainless Steel (SS 304)
• PVC Wire Braided Hose, 10 ft. (3m)
• Nozzle Kit
• For All Fluids

Product features

LX-1367 Nozzle Kit

Nozzle Kit comes with:

Product description

3M Accuspray Spray Gun System with PPS 2. 0 is a convenient all-in-one solution for measuring, mixing, filtering and spraying paint materials. The system features the Accuspray HVLP Spray Gun, a lightweight composite spray gun body molded in one piece, eliminating the complexity, wear and cleaning of small parts and components. This Accuspray gun works with PPS 2. 0 paint cups and disposable lids, liners and nozzles. PPS 2. 0 features improvements like a quarter-turn locking collar with each lid, domed lid design for better spray performance and wider lid fluid spout. Each paint cup has convenient printed-on universal mix ratios for accurate mixing and a clear access window for easy visibility. Atomizing heads can be used 5 to 10 times, then removed and replaced, giving you the performance of a new gun on demand and at a fraction of the cost. Unlike conventional aluminum or other metal paint cup systems, with PPS you don’t have to mix paint in extra cups and filter it into a paint reservoir, so you waste less paint. And with a fresh lid and liner for each mix, there’s less risk of outside contamination. You can also increase productivity in prep and cleanup time by as much as 50% and use up to 70% less cleaning solvent over conventional paint cup systems. All-inclusive kit includes 1 Accuspray spray gun, 5 nozzles (1. 2 mm, 1. 3 mm, 1. 4 mm, 1. 8 mm, 2. 0 mm), 1 plastic paint cup, 5 disposable lids with locking collar (4 with 200-micron filter, 1 with 125-micron filter), 5 disposable liners and 3 sealing plugs. Air compressor and hose coupler not included.

• ONE GUN FOR ALL PAINT SPRAY NEEDS – 3M Accuspray handheld HVLP paint gun works with PPS 2. 0 disposable lids, liners and nozzles to measure, mix, filter and spray a variety of paint materials
• ALL-INCLUSIVE PAINT SPRAY KIT – Includes 1 AccuPark spray gun, 5 nozzles (1. 2 mm, 1. 3 mm, 1. 4 mm, 1. 8 mm, 2. 0 mm), 1 plastic paint cup, 5 disposable lids with integrated locking collar (4 with 200-micron filter, 1 with 125-micron filter), 5 disposable liners and 3 sealing plugs. Air compressor and hose coupler not included
• IMPROVED LID DESIGN – PPS 2. 0 lids feature an integrated quarter-turn locking collar, which helps eliminate cross-threading and paint buildup, as well as a new domed shape that holds up to 3 ounces of material below the filter, reducing sputter and improving spray performance
• REUSABLE PAINT CUP – PPS 2. 0 reusable hard plastic paint cup features printed-on universal mixing ratios and a clear access window so you can easily see the paint and remove the lid and liner
• VARIETY OF MATERIALS – The different nozzle options allow you to spray paints, stains, varnishes, basecoats, undercoats, primers, sealers, clear coats, gelcoats, spray able adhesives and more
• LIKE-NEW PERFORMANCE AGAIN AND AGAIN – With replaceable atomizing heads, you get the performance of a brand-new gun each time you replace the nozzle
• 360 DEGREE PAINT RANGE – When used with included PPS 2. 0 cup system, you can consistently spray at any angle, even upside down
• LESS WASTE, MORE EFFICIENCY – Less paint waste, mess and contamination than traditional methods. Use up to 70% less cleaning solvent, and shorten prep and cleanup time by as much as 50% compared with conventional metal paint cup systems

User questions & answers

Question:	Can this gun be used with latex paint
Answer:	Yes, An HVLP gun like this can spray any brand, but it wouldn't be used to spray just any type of paint. HVLP cannot spray thick latex paints. This is designed to spray auto grade and fine woodworking finishes. If you finishing cabinets or wood work, find the appropriate product and thin it to the viscosity of Milk or slightly thicker.
Question:	Can these gun spray PPG paint products
Answer:	Hi Billy! Thank you for your question. The 3M 26580 Accuspray Paint Spray Gun System with PPS 2.0 is designed to work with an air compressor rather than a turbine system.
Question:	Can I use this with a Tritons capspray
Answer:	Thank you for your question. The new PPS series 2.0 kit offers a new composite body gun that offers a more robust and durable gun body along with the new and improve PPS seires 2.0 cup system
Question:	What is pps 2.0 and how is this different from your previous (original pps) version
Answer:	It will not degrade rubber but it will not protect it either as it will not adhere to the rubber.

Product description

3M PPS Type H/O Paint Pressure Cup, Collar and air hose is designed to spray thick high-viscosity liquid material with the 3M Accuspray HGP Spray Gun along with original PPS lids and liners. With the pressure cup, air is forced through the air hose to collapse the liner and push out the paint material. Unlike conventional aluminum or other metal paint cup systems, with PPS you don’t have to mix paint in extra cups and filter it into a paint reservoir, so you waste less material. Simply place a liner in the reusable paint cup, mix the material, snap on the lid, attach the locking collar and you’re ready to spray. With a fresh lid and liner for each mix, there’s less risk of outside contamination. You can also increase productivity in prep and cleanup time by as much as 50% and use up to 70% less cleaning solvent over conventional paint cup systems.System delivers improved quality, lower material cost, less solvent consumption, improved productivity, less mess and easier use

• ONLY FOR USE WITH 3M PPS (Original Series) Paint Spray Products
• USE WITH ACCUSPRAY HGP SPRAY GUN: Spray gun specially designed to provide air pressure to 3M PPS H/O Pressure Cup
• AIR PRESSURE TO APPLY THICK PAINT MATERIAL: Air is forced through the air hose to collapse the liner, pushing out coatings
• VERSATILE USES: Large 28-ounce size ideal for painting projects like cars, boats, furniture, equipment, home, arts and crafts, and for applications like undercoating, truck bed liners, sprayable adhesives, sound dampening coatings, high-build primers and gelcoats
• LESS WASTE, MORE EFFICIENCY: Less paint waste, mess and contamination than traditional methods. Use up to 70% less cleaning solvent, and shorten prep and cleanup time by as much as 50% compared with conventional metal paint cup systems
• 360 DEGREE PAINT RANGE: System design allows you to consistently spray at any angle, even upside down

User questions & answers

Question:	I have a fuji turbine which requires the h/o cup but i only need standard size liners. how can make the ratio insert work with this combo
Answer:	Nope. It is very sturdy. I run every morning with it on. I really like this. I can breathe
Question:	Which is finer 200 micron or
Answer:	Wet paper towel. Glass cleaner if it has bad spots.
Question:	will this work on a air compresser or only on hvlp turbin
Answer:	I clean it with water & a paper towel...but these are basically disposable & once I use them for awhile or they get too foggy I throw it away
Question:	I have a new fuji t75g gun. I am confused on what ppg cup I should get. H/O or the regular
Answer:	I don't have a problem. I wear a paper mask and a cloth mask under my shield. Even my glasses do not dog up but I make my own cloth masks and found that I need to keep the top part of my mask under the bottom edge of my glasses. I love my shield over masks for added protection since I am extremely high risk.

Product description

3M Accuspray Spray Gun System with Original PPS is a convenient all-in-one solution for measuring, mixing, filtering and spraying paint materials. The system features the Accuspray HVLP Spray Gun, a lightweight composite spray gun body molded in one piece, eliminating the complexity, wear and cleaning of small parts and components. Atomizing heads can be used 5 to 10 times, then removed and replaced, giving you the performance of a new gun on demand and at a fraction of the cost. This Accuspray gun works with original PPS or PPS 2.0 paint cups and disposable lids, liners and nozzles. Unlike conventional aluminum or other metal paint cup systems, with PPS you don’t have to mix paint in extra cups and filter it into a paint reservoir, so you waste less paint. Simply place a liner in the reusable paint cup, mix the paint, snap on the lid, attach the locking collar and you’re ready to spray. With a fresh lid and liner for each mix, there’s less risk of outside contamination. You can also increase productivity in prep and cleanup time by as much as 50% and use up to 70% less cleaning solvent over conventional paint cup systems. All-inclusive kit includes 1 Accuspray spray gun, 4 nozzles (1.2 mm, 1.3 mm, 1.4 mm, 1.8 mm), 1 plastic paint cup, 1 collar, 5 disposable lids (4 with 200-micron filter, 1 with 125-micron filter), 5 disposable liners, 1 mix ratio insert and sealing plugs. Air compressor and hose coupler not included.

• ONE GUN FOR ALL PAINT SPRAY NEEDS: 3M Accuspray original handheld HVLP paint gun works with original PPS or PPS 2.0 disposable lids, liners and nozzles to measure, mix, filter and spray a variety of paint materials
• ALL INCLUSIVE PAINT SPRAY KIT: Includes 1 Accuspray spray gun, 4 nozzles (1.2 mm, 1.3 mm, 1.4 mm, 1.8 mm), 1 plastic paint cup, 1 collar, 5 disposable lids (4 with 200-micron filter, 1 with 125-micron filter), 5 disposable liners, universal mix ratio insert and sealing plugs. Air compressor and hose coupler not included
• PICK YOUR PROJECT: Comes with 22-ounce standard-size cup, ideal for any painting project including cars, boats, furniture, equipment, cabinets, arts and crafts
• VARIETY OF MATERIALS: The different nozzle options allow you to spray paints, stains, varnishes, basecoats, undercoats, primers, sealers, clearcoats, gelcoats, sprayable adhesives and more
• LESS WASTE, MORE EFFICIENCY: Less paint waste, mess and contamination than traditional methods. Use up to 70% less cleaning solvent, and shorten prep and cleanup time by as much as 50% compared with conventional metal paint cup systems

User questions & answers

Question:	What size head would you use for cabinetry
Answer:	No purchased the clear.
Question:	What are the cfm and psi requirements
Answer:	A few hours, wish it did stay on longer.
Question:	The picture shows 4 heads (1.2, 1.3, 1.4, and 1.8). The detailed description shows that it only includes 1.4 and 1.8 - What is really included
Answer:	It says distributed by Evencome in Los Angele, Ca. It is a jel with a stick applicator.
Question:	Will my 21gal 2.5HP compressor work for this sprayer? cfm 4.7 @ 90psi and 5.8 @ 40psi
Answer:	The peach of lip plumper can lip plump outside, If you don't use it, you can add an ornament to your office or home.

Product features

3M Accuspray ONE Spray Gun System with Standard PPS

The 3M Accuspray One Spray Gun System with Standard PPS delivers fundamental improvements in the application of paint and other fluids. A lightweight, 1-piece composite spray gun body eliminates the need for maintenance kits. Replaceable atomizing heads afford the performance of a new gun, on demand and at a fraction of the cost. And the PPS disposable cup system requires almost no cleanup.

No Cleanup, No Maintenance Kits, A Tremendous Range of Uses.

3M asked: 'If you could have the perfect spray gun, what would it be like?' The 3M Accuspray Spray Gun System with Standard PPS was the result: The one of the only HVLP spray gun system that allows for professional-grade solvent-based or waterborne finish application with virtually no cleaning and no maintenance kits. This system features a lightweight, composite spray gun body that is molded in one piece, eliminating the complexity, wear and cleaning of small parts and pieces. It effortlessly accepts replaceable atomizing heads – these transparent nozzles can be reused 5-10 times and then simply removed and replaced. This affords the performance of a brand new spray gun, on demand and at a fraction of the price. Atomizing heads are available in a 1.4 mm size, ideal for sealers, primer surfacers, basecoats and topcoats; a 1.8 mm size for higher-viscosity materials such as primer and gel coats; and a 2.0 mm size for heavy-duty applications using fluids like adhesives, undercoats or industrial coatings. And fast, easy controls for fan diameter, fluid and air pressure allow for quick adjustment across jobs from spot repairs to full panel coverage requiring up to 12” vertical or horizontal spray patterns – one gun for a complete range of applications.

Virtually No Cleaning Required.

Very simply, you will never need to clean a spray gun body or a paint cup again. A simple, durable composite one-piece spray gun body works with the 3M PPS Paint Preparation System. You simply place a disposable liner within a re-usable paint cup. Then mix the paint in the PPS liner, snap the disposable lid (with built-in filter) in place and attach the locking collar to complete the PPS System. With just a quick quarter-turn, the assembly easily attaches to the spray gun body. Once you’re finished spraying, simply remove the liner from the cup and discard it. It’s that simple.

Product description

Built into every fuel transfer pump, chemical transfer pump and meter is over 50 years of experience—and the pride and workmanship associated with the moniker “Made in USA”. We use only the most durable materials to insure long life and dependability. Fill-Rite and Sotera branded products deliver superior performance time and time again, regardless of the application or installation.

• HEAVY DUTY: UL/cUL certified fuel transfer pump constructed from heavy-duty cast iron; Features a 1/3 horsepower 110V AC motor, making it ideal for large, above-ground fuel tanks
• QUICK-FILL: Flow rate of up to 20 gallons per minute, ensuring a quick-fill for even the largest equipment; 30-minute duty cycle that can pump up to 600 gallons without stopping
• INCREASED SUCTION LIFT: Incorporates rotary vane technology to increase suction lift, provide self-priming capabilities, and establish consistent performance
• COMPATIBLE WITH: Diesel, biodiesel to B20, gasoline, ethanol to E15, and kerosene
• INCLUDES: Pump, automatic nozzle, hose, and resettable mechanical gallon meter

User questions & answers

Question:	Can you install it to a 80 foot hose and expect it to work properly
Answer:	I think you are correct, only 2 sizes of H/O hard plastic pressure cups.But there are three sizes of the plastic liners. The regular 3M PPS system comes with 3 sizes. The regular is not a pressure system but for non turbine gravity feed. Not sure of the size, but Tall (the liner you have) Medium and Small.You may get some part numbers from the link below http://www.3m.com/3M/en_US/company-us/all-3m-products/?N=5002385+8711017&Ntt=pps&LC=en_US&co=cc&gsaAction=scBR&rt=rs&type=cc
Question:	How many gpm
Answer:	Mesh sizes run the opposite of micron sizes - with US mesh sizing, a bigger number means it filters out smaller particles. Micron is an actual measurement like inches or cm. There are 1000 microns in a millimeter. So a smaller micron size means it will only allow smaller particles through. So 125 microns is finer/smaller than 200 microns. Whether or not that is "better" depends on your perspective. A 200 micron filter will clog sooner than a 125 micron filter. For purposes of this type of filter, a double filter - with the larger 125 micron filter in line first followed by the 200 micron filter - will be clog less often. The first filter will trap the larger particles and the second filter will trap the smaller particles. It's the opposite if the measurement is in US mesh sizes.
Question:	Do you supply or sell suction pipes for these pumps
Answer:	It will work with both, provided that you have a source for the pressure hose to presurrize this cup. Some sprayguns have pressure ports built into them. (Example: the relatively new 3m plastic sprayguns, whose part numbers I don't recall). Turbine guns always have pressure ports built in, since they have very little siphoning capablity. For conventional hvlp guns that do not have a pressure port built, you can add a regulator at the base of the gun and redirect a regulated pressure source to the pressure cup. Never charge the cup with more that 10 psi, even though this cup has a pressure relief built into it. its never a good idea to over pressurize the cup. See the manufacturers instructions or go to the 3m website for their recommendations. Hope this helps. I've got one of these and I love it!
Question:	IS THIS PUMP FOR GASOLINE
Answer:	I believe you need the HO. I have a Fuji also and you have to use a pressurized cup regardless of size. I have the mini and the large. Hardley any paint come out with a regular cup. Hope that helps

Product features

Rotary Vane

Rotary vane technology is a positive displacement (fixed volume) pump design that utilizes an offset rotor with sliding vanes that rotates on a motor shaft inside the pump. The vanes move outward against the pump cavity to form individual chambers (positive displacement). Fuel enters into the pump cavity through the inlet port on the rotor side where the vanes are fully extended. As the rotor turns, the vanes collapse inward creating the pressure that forces the fuel into the discharge port and through the hose.

Advantages of rotary vane technology…..

• Increased suction lift
• No performance loss due to vane wear
• Self-priming ability
• Easy maintenance
• Consistent performance

Suction Lift

The maximum suction lift rating refers to the maximum vertical distance that a pump can lift fuel out of a tank. On rotary vane pumps, suction lift is created due to the offset of the rotor in the pump cavity, which increases the volume in the chamber between the vanes, thus lowering the pressure on the pump’s inlet. Atmospheric pressure, which is now greater than the inlet pressure in the pump, moves the fuel from the tank to the pump cavity (self-priming).

Suction lift is determined by the pump specifications, the type of fuel, and the altitude of the location where the pump is installed. Higher altitudes reduce the suction lift of a pump due to the reduced atmospheric pressure.

To achieve maximum suction lift, the inlet plumbing should be as straight as possible with no elbows or bends in the line. Accessories, such as filters, should not be installed on the inlet side of the pump. Valves should be set with minimum spring pressure and must contain a pressure relief valve.

Discharge Pressure

Discharge pressure refers to the systems pressure while dispensing. It effects flow-rate based on the pump’s design - the lower the discharge pressure, the higher the flow-rate.

Variables that increase discharge pressure/decrease flow-rate:

• Adding accessories (filters, measuring devices, swivels, etc…)
• Changing accessories (increasing the length or decreasing diameter of hose)
• Dispensing fuel above the pump (the higher the discharge point is above the pump the lower flow-rate)
• Pumping higher viscosity fluids (Fill-Rite pumps are designed to pump at a viscosity no greater than kerosene)

To lower discharge pressure/increase flow-rate, remove or limit restrictions. Examples include, moving from a 10 micron filter to 30 micron filter, changing from a 800 series to a 900 series or TT10 series, limiting the use of elbows in system design, or increasing the diameter of your discharge hose/pipe.

700KTF2659

Primary overhaul kit for 700 series pumps.

KIT700AS

Anti-siphon kit for 700 series pumps.

KIT700MA

Meter flange assembly for connecting an 800 series meter to a 700 series pump.

KIT900PF

Meter flange assembly for connecting an 900 series meter to a 700 series pump.

Digital Inline Turbine Meters From Fill-Rite

Accurate to 1%, this turbine meter sets the standard for accuracy, ease of use and safety. Compatible with gasoline, diesel, kerosene, jet fuel, heptane, and mineral spirits (aluminum version). It comes with the UL/ATEX listing on the entire meter, not just the electronics as competing brands have.

Each meter is built to handle flow-rates between 2-35 GPM and operate in temperatures between -40 F and 176 F.

Install it where you need it, even at the end of the hose. Measure gallons, liters, quarts, pints, and ounces. For a robust meter you can depend on, choose Fill-Rite, the most trusted name in pumps and meters.

Product description

What makes the 3M Performance Spray Gun system different is the technology inside the quick-change replaceable nozzles. Because paint and coatings never pass through the body of the spray gun – and only the atomizing head – it’s like getting a brand new spray gun every time you swap the nozzle. Get the pattern control, atomization and transfer efficiency you expect from a premium spray gun — all while helping to drive more consistent spray performance across each job, every day. 3M Performance Gravity HVLP Atomizing Head Refill Kit includes five 1.4 size nozzles, ideal for clearcoat, solvent base color, single stage top coat, direct gloss, primer sealer, wet on wet primer, primer surfacer, high build primer. Nozzle recommendations are starting points only; refer to paint manufacturer for recommendations on fluid tip size. The replaceable nozzles are used exclusively with the gravity-fed 3M PPS Series 2.0 Spray Cup System, which helps to reduce material waste, mess and contamination compared to traditional metal paint cups. Forget about tearing down spray guns and soaking in solvent. Our complete, integrated spray system is your path to smarter cleanup. The atomizing heads attach to the 3M Performance Spray Gun needle and are tightly secured to the spray gun with a specially-designed locking collar. No additional tools required for changeouts. Simply remove the nozzle from the spray gun, and either appropriately clean the fluid tip or replace it to keep your spray gun performing like new.

• PREMIUM SPRAY PERFORMANCE: For use with 3M Performance Spray Gun System, delivers excellent pattern control, atomization and transfer efficiency
• VERSATILE: 1.4 Size nozzle ideal for clearcoat, solvent base color, single stage top coat, direct gloss, primer sealer, wet on wet primer, primer surfacer, high build primer
• REPLACEABLE NOZZLES: With quick-change atomizing heads, paint never passes through the body of the gun; it’s like getting a brand-new spray gun with every nozzle
• SMARTER CLEANUP: Cleanup can be as easy as replacing the nozzle or a quick appropriate cleanup with solvent to be reused
• SECURE: Locking collar and fittings firmly attach nozzles to spray gun body and whip hose
• USE WITH 3M PPS SERIES 2.0: All-in-one gravity spray cup solution for measuring, mixing, filtering and spraying paint materials
• For industrial/occupational use only. Not for consumer sale or use.

Product description

Description:

- This gun is a direct replacement welding gun.

- The gas valve is in the handle.

- This gun uses the small 4mm OD plastic gas hose.

- Includes 5 branches-- #1 for wire feeder, #2 and #3 for trigger, #4 for power, #5 for gas.

- Suitable for / MIG welding machines.

Specification:

- Model: 14AK

- Color: Black

- Working pressure: 0.45 ~ 0.6MPa

- Welding thickness: 1 ~ 25 (mm)

- Trachea interface diameter: M14

- Applicable gas: Carbon Dioxide

Package Includes:

1 Piece 14AK Gas-electric Welding Torch

Note:

Please allow 1-3mm measuring deviation due to manual measurement.

Due to the different monitor and light effect,the actual color of the item might be slightly different from the color showed on the pictures.Thank you!

• This gun uses the small 4mm OD plastic gas hose.
• Suitable for / MIG welding machines.
• The gas valve is in the handle.
• Includes 5 branches-- #1 for wire feeder, #2 and #3 for trigger, #4 for power, #5 for gas.
• This gun is a direct replacement welding gun.

Product description

Welcome to our store. If you love Sports and Outdoor Activities ,we will provide what you want, and give you much surprise.

Description:

- Air plasma cutter AG60 air pilot arc torch with cable connector 3m 5m

- 50/60A air plasma cutting torch/gun AG60/WSD60/SG55

- This torch (gun) can be used for machines such as CUT50 CUT50P ICUT60 LGK60 LTP5000D LTPDC2000D CT520D CT520

- HF Ignition, easy to start arc

- Torch length: 3M (9.84 inch); 5M (16.4 inch)

Specification:

- Material: brass, plastic and other

- Length: 3M/ 9.84 inch; 5M/ 16.4 inch

Package Includes:

1 Piece Air Plasma Cutter Torch

Note:

Color might be slightly different due to the color calibration of each individual monitor.

Please allow slightly measuring deviation due to manual measurement.

• Air plasma cutter AG60 air pilot arc torch with cable connector 3m 5m
• 50/60A air plasma cutting torch/gun AG60/WSD60/SG55
• HF Ignition, easy to start arc
• Torch length: 3M (9.84 inch); 5M (16.4 inch)
• This torch (gun) can be used for machines such as CUT50 CUT50P ICUT60 LGK60 LTP5000D LTPDC2000D CT520D CT520