11 best inverter mig welders

Product description

MIG155Gsv is both MIG and self-shielded flux cored welding machine, which is equipped with unique electronic reactor circuit, which can precisely control the short-circuiting transfer and mixed transfer resulted in better performance than other machines. Compared with silicon controlled welding machine and tapped welding, our products have the following advantages: stable wire feed rate, portable, energy-saving, electromagnetic noise free. Besides, our products spatter less, easier arc starting, deep welding pool, high duty cycle etc.

• Compact – portable – very capable quality welder that can run on either 110/115 or 220/230 volts which makes this a true workhorse with a completely portable footprint. Comes complete as pictured; ready for you to start welding. AND 3 YEAR WARRANTY!
• Working voltage: 115V/230±15%; 30 to 155 Amp welding range; In MMA mode, this welder can be used as a very nice scratch arc TIG welder with optional accessories.
• Comfortably welds up to 1/4 in. mild steel that is properly prepared using 220 volt input, in both MIG, flux-cored and stick welding. Feeds wire at 78 in. to 472 in. per minute and has infinitely adjustable wire speed and heat settings. This welder does not use tapped controls that are found in cheaper machines!
• This model uses an advanced compact IGBT inverter design with automatic overheat and over current welding protection.
• The model 155 incorporates 2T/4T modes. 4T is useful if you have a long weld to do, as it saves you having to hold the trigger down the whole time. Great feature for out of position welding.

User questions & answers

Question:	Would the predator 9000 generator with 7250 continues run this and your larger inverter welders
Answer:	The Hobart IronMan 230 is made in the U.S.A. and backed by Hobart's industry-leading 5-3-1 industrial warranty. You get a 5-year warranty on transformers, stabilizers, reactors, rectifiers, rotors, stators and brushes; a 3-year warranty on drive systems, PC boards, solenoid valves, switches and controls; and 1-year warranty on plasma torches, MIG guns, relays, contactor, triggers, regulator, accessories, spoolguns, battery, field options and running gear. (90-day limited warranty for industrial use). Normal wear items such as drive rolls, contact tips, nozzles, gas diffusers, plasma torch tips, electrodes and weld cables are not covered under this warranty.
Question:	Where can I get a new welding torch that’s longer than the one supplied with this welder will the US pro welding 15 footer fit on this welder
Answer:	My welder only came with .030 tubular 0.035 solid wheel. I recall that being an order able accessory. Not 100% sure but I thought it was suppose to have a #2 roll of FC. Overall, it’s been a damn good welder and I’d recommend it.
Question:	Can use 10 pound spool wire
Answer:	We ship this item at no charge. Thank you
Question:	When using 110V, can you effectively weld 1/4”? If not, what’s the maximum capacity when using 110V
Answer:	I think what you are asking is what the duty cycle is. It all depends on the heat setting you are using at the time. The duty cycle at about 140 amps is close to 100%, and drops to about 30% at 250 amps. I don't know what you will be welding, but even on pretty heavy iron (3/8" or so) using .035 solid wire and co2/ argon gas, I seldom ever use more than 125, to 140 amps, so I never exceed the 100% duty cycle. But I also very seldom have long enough welds at a time to matter. The welder I had before I bought the Ironman 230, was just a 150 amp with about a 30% duty cycle at 120 amps, and it was still going after nearly 30 years, and I used it for some pretty big projects.

• Weldpro's flagship 200 amp MIG welder that goes beyond MIG and Flux Core welding! AND 3 YEAR WARRANTY!
• The model 200 is also capable of true lift TIG welding as well as stick welding and aluminum welding with the optional spool gun. The MIG 200 is an intuitive synergically designed MIG / Flux Core welding machine.
• MIG,Stick or TIG weld all from a single compact, space-saving unit. Welding Amperage Ranges230V: MIG: 40-200A; MMA: 40-200A; TIG: 15-200A115V: MIG:40-120A; MMA:40-120A; TIG: 15-120A; 30% at 200 Amp rated duty cycle.
• MIG welding wire diameter: .023 .030 .035, welding thickness: 19ga- 0.197 in; TIG tungsten needle diameter: 0.063 0.094, welding thickness: 25ga- 1/4 in; MMA electrode Dia: 0.063-0.157 acid electrode, alkaline electrode, welding thickness: 14ga-0.315in
• Dual digital display easy to read and set amperage and wire speed for repeatable welds every time. VRD high temp and overload protection with indication. User adjustable inductance settings.

User questions & answers

Question:	what is a great upgraded mig gun for this
Answer:	I haven't tried it. Mig and stick are good
Question:	Does this welder accept 8-10 lb. spools
Answer:	Yes 10 pound roll fits in the welder
Question:	Hooked it up for mig mode and pressed trigger on torch. Just clicks and doesnt feed wire
Answer:	You maybe pushing it, as pretty much any mig welder is just a transformer, and depending upon efficiency, even midrange may get you popping the breaker.
Question:	Will this weld thinner materials? the minimum of 40 amps in mig mode is pretty high, like it might blow thinner stuff
Answer:	Sorry, the MIG welder can not add a foot pedal.

Product features

Weldpro MIG200GDsv Multi Process Welder

Mig200gdsv 3-in-1 multi-process dual-voltage synergic welder is designed for for hardware, decoration, car modification, equipment and factory maintenance. The igbt inverter technology provides high power in a light, compact unit ( 30 lbs). This units are capable of performing mig, lift tig and stick welding equally well at maximum 200 amp output.

Package includes

• MIG torch: 10 ft. ERGOPLUS15
• Tig torch: 13 ft. WP-17
• Electrode holder: 5awgx10 ft. Cable35-50 quick connector 200a
• T-shape Earth clamp: 5awgx10 ft. Cable35-50 quick connector 300a
• Gas hose
• Power adapter
• Flow meter
• Φ0.8/1.0V drive roller; 0.6-0.8/0.9 V drive roller; 0.8-0.9 knurled drive roller
• two contact tips: 0.030, 0.040 each

Product description

The Forney easy weld 140 fc-I machine uses flux core wire. Applications include do-it-yourself, maintenance and repair, metal fabrication and hobbyist. Product specifications: dimensions: 16. 75" X 8. 125" X 12" Weight: 19 lbs. Gasless/flux-core welding only portable torch wrap infinite voltage and wire feed speed control 120-volt input, 140 amp output welds 24-gauge up to 1/4" Handles . 030" Wire includes: 8' Mig Gun, 8' Ground clamp and 20A - 15A adapter duty cycle 30% @ 90A

• EASY TO USE-140 FC-I MIG machine uses 0.30, flux core wire. It has infinite voltage and wire feed speed control so you can dial in the perfect weld! Perfect entry level welder
• POWERFUL- Up to 140 Amp output that allows you to weld mild steel up to 1/4 in plate
• PORTABLE WELDER- Lightweight 19 lbs. easily carried to any Do-It-Yourself, Maintenance, Repair, Metal Fabrication and Hobbyist project
• RUGGED- All metal case, Built to take the day to day. Big enough to handle 2 and 10 pound rolls of wire
• WELDER INCLUDES- 8' MIG gun, 8' ground clamp, Integrated handle with torch wrap and a 20A-15A adapter. Backed by a 12-month warranty
• PRODUCT SPECIFICATIONS- Dimensions: 16.75" (425.45 millimeters) x 8.125" (206.38 millimeters) x 12" (304.8 millimeters), Weight: 19 lbs. (8.62 kilograms), Gasless/flux-core welding only, Portable, Torch wrap, Infinite voltage and wire feed speed control, 120-volt input, 140 AMP output, Welds up to 1/4 in. (6.35 millimeters), Handles .030 in. or 0.35 in. wire, Includes: 8' MIG gun, 8' ground clamp and 20A - 15A adapter, Duty Cycle 30% @ 90A
• RECOMMENDED ACCESSORIES- Contact Tips (60170, 60171 and 60172),Welding Nozzles: (85336 and 85337), Diffuser: (85339), Flux Core MIG Wire: (42300 and 42301), Anti-Spatter Spray: (37030), Nozzle Gel: (37031)
• Click on the (BY FORNEY) name above in blue under the title to view our full catalog of Welders, Abrasives, Chain/Wire Rope, Tools and more!

User questions & answers

Question:	This come with the welding wire
Answer:	I'm sorry it took as long as it did for me to answer you. I have no prior knowledge of this Predator generator and I had to look that up. I also would like to preface what I'm about to say with I am not a generator expert. Also I wanted to be sure that I looked up the specific amperage draws of our different welders. The formula for calculating the answer to your question is pretty straight forward. Generators measure their output in Watts in order to determine what wattage is necessary the formula is as follows... Volts X Amps = Watts. The machine you are asking about runs 7250 continuous Watts but it does not take into account what percentage of fluctuation of output amperage this machine makes, how clean is this machine? How reliable is the output amperage? I have no idea but let's plug the numbers in assuming the machine can maintain a relatively stable output. The model 155 draws max 25.4 amps on 230V in MIG mode or, 5842 watts. It draws 26.7amps on 230V in stick mode or, 6141 watts. So for this small machine it would appear yes all else being ok. Now, for example, our 200 amp MIG draws in MIG mode 35.7 amps at 230 V or, 8211 watts. It draws 41.7 amps in stick mode at 230 V or, 9591 watts. So for our larger inverters, it would appear no, that generator cannot provide sufficient output to run the welders at full potential welding power.
Question:	What type of .30 tip? Thread pitch? Size
Answer:	So only going by the pictures this appears to be a Tweco style gun similar to what the older Lincoln’s ran. Unfortunately you will have to find out what the US pro welding gun has for a back end.
Question:	Is the wire supposed to move really slow even turned all the way up
Answer:	No, not on the 155 model. 2lb
Question:	Do you know what the power output is turned all the way down
Answer:	This question really is more a generic question than it is specific to any brand welder. If you're giving it half the power it can use. Generally, you can figure you're going to get half the result. So prepared properly and possibly a little bevel, 1/8in would be about max Remember voltage is the pressure or pushing force of the amperage or heat.

Product features

Forney Easy Weld 140 FC-i Welder

The Forney 140 welder is an impressive Flux-Core capable welder. Perfect for first time welders up to avid users. Applications include do-it-yourself projects, general metal fabrication, maintenance & repair, farm & ranch and automotive work.

Product description

"Features: - Easy to Use and Convenient to Carry - Powerful and Rugged MIG Welding Machine up to 130 Amp Output - Nice Machine Appearance and Screen Printing - Anti-corrosion & Water Resistant Metal Machine Case - Easy to Read the Numbers of Scale - Test Data Supports Stable Performance and Output Voltage - Protects Components and Transformer from Corrosion and Damage - Adjustable Welding Speed up to 6.7m per Minute - Supports Dual Voltage 110V/220V, Wire Feeder 24V - Accepts 0.6-0.8mm Flux-Cored Wire - 0.7KVA/1.8KVA Maximum and Minimum Power - 2mm of Maximum Thickness of Metal - Allows to Weld Steel and Aluminum up to 0.08 inch Plate Steel - Automatically Adjust the Inverter Pulse Width through Closed-Loop Control to Ensure the Output Stability - 60% Rated Duty Cycle, Basically can Meet the Durable Welding - Welding can be done by Connecting the Carbon Dioxide Gas - Suitable for Indoor Work What's in the Box: - Welding Machine - Welding Gun - Ground Wire Clip (1.6meters) - Brush - Protective Mask - 2.5m 1.8m Big USA Plug - Power Adapter Technical Specs: - Construction Material: Metal - Power Supply: 110V/220V (13A Power Adapter) - Maximum Input Current: 110V/43.1A, 220V/21.5A - Frequency Response: 50/60Hz - Rated Input Power: 8.1KVA - Current & Voltage Adjustment Range (MIG, A/V) : (50A/16.5V-130A/20.5V) - 25?60% Utilization Factor Output (MIG, A/V): (130A/20.5V) - 40?100% Utilization Factor Output (MIG, A/V) :(100A/19V) - No-load Voltage: 42V - Usable Wire: 0.2''-0.3'' -inch - Wire Feed Rate: 3-15m/min - Power Factor: 0.73 - Efficiency: 85% - Shell Protective Grade: IP21S - Insulation Grade: F - Welding Output: 60-125A,AC - Capacity: 18 gauge (0.039"") to 3/16"" (0.24"") mild steel only - Not for welding aluminum - Duty Cycle: 20% @ 90 A - Open Circuit Voltage: 30V - 2.67KVA - Welder Tips / Wire Size Installed tip will accept 0.031"" Flux-Core wire - Wire Spool Capacity: 2.2 lbs. Spool - Recommended Circuit Breaker: 30A time-delay (slow-blow) breaker (30A for maximum performance) - Extension Cord Recommendations: 3 conductor #12A or larger up to 5.91 ft. - Generator Requirements: Minimum 4,000W continuous output with no low-idle function (or low-idle off) - Product Dimension (L x W x H): 15.7'' x 6.7'' x 11.8'' -inches"

• 60% RATED DUTY CYCLE: The SereneLife Digital MIG Welding Machine features 60% rated duty cycle which allows you to weld for six minutes then rest for four minutes. Uses 0.6-0.8mm flux-cored wire. Perfect for entry level and professional welders
• UP TO 0.08” PLATE STEEL: This powerful & rugged MIG welder machine features up to 130 Amp output that allows you to weld steel & aluminum up to 0.08” plate steel. Supports dual voltage 110V/220V, wire feeder 24V w/ 0.7KVA/1.8KVA maximum and minimum power
• ANTI-CORROSION MACHINE CASE: The handy MIG welder features anti-corrosion and water resistant metal machine case w/ nice machine appearance and screen printing. Protects components and transformer from corrosion and damage
• ADJUSTABLE SPEED: Adjust speed up to 6.7m per minute so you can dial in the perfect weld. Test data supports stable performance & output voltage. Automatically adjust the inverter pulse width through closed-loop control to ensure output stability
• PORTABLE DESIGN: The multipurpose welder features a convenient carry handle, easy for transport & storage. Very convenient, can be used anywhere you need. Includes welding gun, ground wire clip (1.6m), brush, protective mask & 2.5m²1.8m Big USA Plug

User questions & answers

Question:	My generator has a 120/240 plug will it work of that
Answer:	I purchased the Weldpro mainly due to it's duel voltage, I have a Lincoln 125 mig that does a superior job at 110 vac. I keep the Weldpro on the same cart set up for Arc and Tig welding. So I can't help you with any upgrades.
Question:	My generator has a 120/ 240 plug. Can the slmigwl 140 run of that
Answer:	Yes. The welder takes the small 1-2 lb. 4" spools as well as the medium10-12 lb. 8" spools w adapter. However, it will not take the large 40-44 lb. 12" spools.
Question:	Can it weld 1/8 to 1/4 inch mild steel
Answer:	Hi! Chase, check the case where the wire spool is and press the Trigger in the Gun to see if turn? if it is and feeding the wire check the feeder wheels cuz they have differ grooves for the size of the wire you are using! I hope this help. I have not using mine yet but I work with Welders (Wire feed and Stick weld) Good luck
Question:	What type of gas do you use for this welder
Answer:	Smallest you can get away with in MIG mode is 19 Gauge...and you have to move quick. Otherwise...you're looking at TIG which this machine does pretty well...can easily get down to 25.

Product features

Inverter MIG Welding Machine

The SereneLife Digital MIG Welding Machine features a 60% rated duty cycle which allows you to weld for six minutes then rest for four minutes. Uses 0.6-0.8mm flux-cored wire. Perfect for entry-level and professional welders

PORTABLE DESIGN

The multipurpose welder features a convenient carry handle, easy for transport & storage. Very convenient, can be used anywhere you need. Includes welding gun, ground wire clip (1.6m), brush, protective mask & 2.5m²1.8m Big USA Plug

UP TO 0.08” PLATE STEEL

This powerful & rugged MIG welder machine features up to 130 Amp output that allows you to weld steel & aluminum up to 0.08” plate steel. Supports dual voltage 110V/220V, wire feeder 24V w/ 0.7KVA/1.8KVA maximum, and minimum power

ADJUSTABLE SPEED

Adjust speed up to 6.7m per minute so you can dial in the perfect weld. Test data supports stable performance & output voltage. Automatically adjust the inverter pulse width through closed-loop control to ensure output stability

• MULTI FUNCTION MIG WELDER 200A with MIG/ARC/LIFT TIG gas gasless multi Function 220V DC inverter welder
• GAS&GASLESS AVAILABLE 1kg/ 5kg 0.8-1.0mm solid wire with gas welding iron; 0.8-1.0mm flux-cored wire without gas welding carbon steel and stainless steel
• GREAT DESIGN Simple design, beautiful, small size, light weight, easy to carry.
• ACCESSARIES INCLUDING MB15 MIG gun, earth clamp, electrode holer, gas tube, 1kg 1.0/0.8mm flux-cored wire and portable plug, ready to use!
• 1 YEAR WARRANTY - HITBOX MIG200 welder offers good warranty. If you meet any problem when using this machine, please feel freely to contact us at the first time. Our 24 hours online customer service will help you fix it. Just buy HITBOX machines with confidence

User questions & answers

Question:	Were is the gas hook up? Its says its gas/gasless mig but i see no connection internally or external
Answer:	Hi, yes this unit can handle up to 240 volts. Thank you.
Question:	This has a 50 amp 220v plug. Will this run off a 220v 30amp breaker, or a 8500 starting watts 5500 continuous generator
Answer:	Hi, yes this unit can handle up to 240 volts. Thank you.
Question:	What is the requirement of the inlet gas pressure
Answer:	Hi, this unit can handle 18 gauge (0.039") to 3/16" (0.24") mild steel only. Thank you.
Question:	can it tig aluminum
Answer:	Hi, it is not gasoline operated welding machine. You have to plug it into your wall outlet. Thank you.

Product features

Synergy Control MIG200 Multi Functional DC Gas No Gas Self-Shielded MIG Welder

- For stainless steel and iron welding,Gas & No Gas Self-Shielded welding machine.

- Solid wire/flux cored wire is selectable when doing mig welding.

- Capable for 5kg-5kg roll of welding wire,100% duty cycle can be reached when using 0.8mm wire.

- Functional machine with MIG,TIG,ARC function,maximum welding rod diameter up to 4.0mm.

- This machine can be used with power generator,also with easy operation for beginners.

- Contents all the nessecerry accessories,ready to be used.

Gas MIG

Use gas and solid wire 0.8/1.0mm 1kg or 5kg

Gasless MIG

Use flux cored wire, without gas

Lift TIG

Only lift tig function, when use this function, you need to insert argon gas. And the wp-17V torch is not included in this listing, if you need it, please kindly order it separately.

ARC/Stick/MMA

ARC function

HITBOX MIG200 newly updated welding machine

Specifications:

Brand name: HITBOX / Model: MIG200A

Inverter technology: IGBT

Input voltage: AV220±15%V / Frequency:50/60HZ

Max OCV:60V / Duty Cycle: 30%@200A

Power factor:0.73 / Postflow time:1.0±0.5

Packing dimension: 425*183*290mm / Wire diameter:0.8/1.0mm

Applicable thickness: Over 0.8mm / Wire feed speed:3-18m/min

• Portable Welder- Lightweight 11 lbs, features a convenient carry handle, easily carried to any Do-It-Yourself, Maintenance, Repair, Metal Fabrication and Hobbyist project
• Easy to use-This welding machine uses 0.30/.035 flux core wire. It has infinite voltage and wire feed speed control so you can dial in the perfect weld! Perfect entry level welder
• Safety-Automatic compensation for voltage fluctuation, over current protection, over load protection.
• Powerful- Up to 135 Amp output that allows you to weld mild steel up to 1/8(3.2 millimeters) in plate
• Efficient-Advanced IGBT DC Inverter Technology,the weight and volume decrease greatly while the conversion efficiency increase of more than 30%,Energy-saving

Product features

YESWELDER Flux-135 MIG WELDER MACHINE

• Easy to use-This welding machine uses 0.30/.035 flux core wire. It has infinite voltage and wire feed speed control so you can dial in the perfect weld! Perfect entry level welder
• Portable Welder- Lightweight 11 lbs, features a convenient carry handle, easily carried to any Do-It-Yourself, Maintenance, Repair, Metal Fabrication and Hobbyist project
• Safety-Automatic compensation for voltage fluctuation, over current protection, over load protection.
• Powerful- Up to 135 Amp output that allows you to weld mild steel up to 1/8(3.2 millimeters) in plate
• Efficient-Advanced IGBT DC Inverter Technology,the weight and volume decrease greatly while the conversion efficiency increase of more than 30%,Energy-saving

Easy Weld

The YESWELDER FLUX-135 welder is an impressive Flux-Core capable welder. Perfect for first time welders up to avid users. Easy to Use and Convenient to Carry

Powerful

• Up to 135 Amp output that allows you to weld mild steel up to 1/8 in plate

Inner Wire Feeder

• Apply to D100 (4" diameter) rolls 2lb of MIG wire.
• Weld up to .030"(0.8mm) and .035" (0.9mm)with flux core wire.

MIG Gun

• 8' MIG gun,Compatible with Lincoln Magnum 100L.Use standard Lincoln front consumables 21 series nozzle, 11 series tip
• Ready to feed .030" and .035" diameter welding wire

Portable

Lightweight 11 lbs. easily carried to any Do-It-Yourself, Maintenance, Repair, Metal Fabrication and Hobbyist project

Package Included

• Flux-135 MIG Welder
• MIG Gun Cable Assembly(8ft.)
• Ground clamp(8ft.)
• Wire Brush
• 2*Contact Tips

Product description

MIG130 PLUS is 110V inverter flux cored welding machine,suit for welding carbon steel,aluminum,stainless steel etc.



Welcome to use products of our company and made suggestions, we will try our best to perfect our products and service.



Features:



- DC Inverter Mini MIG Welder



Stainless steel body



- Suit for welding carbon steel,staninless steel,aluminum etc



- Overload Safety Protecyion



- Good against voltage fluctuation.



Internal fan-cooling system



Main Technical Data



- ITEMMIG-130PLUS



- Power voltage (v):110



- Frequency(HZ):60



- Input power (KVA): 3.7



- Max no load voltage output (V):32



- Output current(A):30-120



Duty cycle: 35%



- Suitable wire diam (mm): 0.6-0.8



- Insulation class: F



Protection class: IP21S



Packing List:



1 X MIG130PLUS welder machine



1X Welding gun



1X grounding clamp



1X Welding wire



1X brush



1X Weld mask



If you have any questions, please leave your messages, we promise to reply you within 24 hours and offer you best services.

• ★Flux-Cored Wire, Gas Less Welder - Display4top MIG 130 welder machine uses convenient Flux-Cored Wire.Automatic Thermal Safety Protection,suit for welding carbon steel,aluminum,stainless steel etc.
• ★Strong & Durable - Compact and exquisite MIG welder, made of heavy duty stainless steel body, painted with durable red paints, ensure its long-last serving life-span, a strong and durable welding machine for your long term use.
• ★Overload Safety Protecyion - MIG 130 PLUS welder come with a safety feature where the welder is automatically turned off when it it too hot or the volt and current exceed their range. This function will keep you and your welder safe. Internal fan-cooling system,there are fans helping to cooling the welder when working.
• ★Wide Applications - Portable design light weight, easy for translation and storage. Comes with a comfortable hand grip, making it easy for you to carry anywhere you want.It is perfect for home DIY and general repairing work.
• ★Accessories Included - 1x welding gun with on/off safety contro,1 x grounding clamp,1x brush , 1x protection mask and several other small accessories

User questions & answers

Question:	Can be weld aluminum and stainless? can be sued with 10 pound spools
Answer:	I used it on a 20 amp and was OK. the wire that comes with it is no good. use Lincoln wire and it will do a good job.
Question:	How do you order the tips for this welder or will any brand tips work
Answer:	Dear Customer, Thank you for your question. The maximum current range of this MIG Welder Machine is 120-130A. Please do not hesitate to contact us if you have any other questions. Best wishes, VIVOHOME Customer Care
Question:	Does this arc when you pull the trigger or is it live continuously
Answer:	Hello, from the listing Mig 130 tips are adapted to this product. Please check the description for more details. I think you can buy these contact tips on amazon. Thank you.
Question:	Is the knob for amperage adjustment or wire feeder speed
Answer:	2 in

• 🔥220 volt input and 180 amp output , Duty Cycle : 40% at 180A and 100% at 116A 110 volt input and 140 amp output , Duty Cycle : 40% at 140A and 100% at 84A
• 🔥30A breaker suggested for 220V, 50A breaker suggested for 110V
• 🔥Multi Use:MIG/Stick ,Gas/Gasless /Lift TIG,Stick Welding(3.2mm Rod) 7018 1/8″ very well, also 6013 and 7018 3/32″.Tig mode is optional(need to buy extra tig torch,not included in this package).Please find the tig torch as below; Accepts 2-10 pounds flux core and solid wires .030"-.035"（0.8/1.0 mm ）to weld over .030"(0.8mm) plate thickness.
• 🔥Syntheic digital current and voltage control ,when change the current, adjust the voltage automatically.The panel operation is very simple. In mig state, when you select 1.0 welding wire, welding current, welding voltage and wire feeding speed, the machine automatically matches the data without adjustment.
• 🔥Great for DIY Users, Maintenance and Repair and Metal Fabrication. Energy conservation and environment Protection to compare with Transformer welders.30-Day 100% Satisfaction and Consumables Gift Guarantee and 3 Year Limited Warranty

User questions & answers

Question:	What is the run time before needing to cool down
Answer:	I have a flow ball in a glass tube. As for pressure, all you need is a steady lite flow
Question:	spool gun capable
Answer:	It says it can have not tried aluminum yet

Product features

MIG/MMA/Lift Tig MIG210 Dual Voltage 3 in 1 Mig Welder

Input Power: Single-phase AC110/220V±15%，50/60Hz.

Rated input current:43/30.6 A

Rated power capacity:4.2 KVA

Current adjustment range:30- 180A/30-140A.

Voltage adjustment range:15-24 V

No-load voltage:60±5 V

Wire Diameter: .030"-.035"（0.8/1.0 mm）

Plate Thickness: over .030"(0.8mm).

Feeding speed adjustment range:2-15 m/min

Duty Cycle: 40% at 180A and 100% at 116A

Weight: 12.8kg (28.2bl),13.6kg（30bl）

Dimensions: 21*12*13.8 in （540*310*350mm)

Troubleshooting

Why is my MIG-210 Welder not welding correctly?

1. Wire feed tension: Check the tension on the spooler. Is it set too tight or is the wire feed tension not set correctly?

2. Wire choice: Are you using .035” wire? We recommend .025-0.30" for best performance.

3. Stick out: Is your stick out too long? Your stick out should be no more than ½”.

4. Pull the trigger: To begin welding, pull the trigger on the MIG gun.

5. Proper grounding: The ground should not be attached to painted or coated metal.

Factory Production Process Control System

1,Compoents quality control with fan, on-off swtich ,power cord with 100% production test before delivery .

2.Package kit check to assure all welding accessories including.

3.Carry out welding performance test, life test ,function test and temperature test.

4.Mass production capacity with 10000pcs per week.

• 【Inverter FCAW MIG Welder with Wide Voltage Range】: With ETL certification IGBT inverter welding machine uses 0.03 flux core wire, can easily achieve gassless welding. Wide voltage range from 90V to 140V.
• 【One-Knob Infinite Adjustment】: 10-level precise adjustment and coordinated control of wire feeding speed and current, Maximum output current 125A, Duty Cycle 25% @ 90A at 40 C°. Expert welding parameters and voltage stepless adjustment, easy to start. Welder can automatic compensation and adjustment of welding current, you can dial in the perfect weld! Perfect entry level welder.
• 【Stable Arc & low Spatter 】: TACKLIFE MIG professional Welder is equiped with arc characteristics, to achieve smooth arc and small splash welding experience. Besides, it energy-saving, and fan cooling system and overheat and over current welding protection, which provide a long life using.
• 【Portable Welder】: Lightweight 12 lbs. easily carried to any Do-It-Yourself, Maintenance, Repair, Metal Fabrication and Hobbyist project. Rugged- Metal and plastic case, Built to take the day to day. Also compatible with 2lb.(3.94in.) wire spool.
• 【Whats you get】: 1 x Welder machine, 1 x MIG welding torch, 1 x Ground clamp, 1 x 0.03'' Flux cored wire(2.2 lbs), 1 x Belt, 1 x Power Cord, 1 x Welding Helmet, 2 x Glove, 5 x 0.03'' Contact Tips, 1 x Cleaning Brush, 1 x Metal scrap, 1 x User Manual.

Product features

About TACKLIFE: We aim to manufacture the best products that inspire our consumers to live a more convenient, secure lifestyle.

• 30-90A efficient adjustable current MIG welder suitable for welding.
• 2.4 KW input power wire feeding fast and stable.
• High duty 25%-35% and 40° C overload safety ensure welding quality.

Overheating Protection

Welding machine is equipped with Fan Cooling System that help heat dissipation and reduce operation temperature. Ensure the continuous work of the welder.

Welding Gun with Button

Flux cored wire, self release gas while welding, prevent oxidation of the welded part. A torch with Full On/Off safty control.

One Knob Operation

Built-in expert welding parameters as well as adopt voltage stepless regulation, only rotate the knob, the welder will automatically match the feeding speed, don't have to adjust other parameter by yourself, because the power source is synergic designed.

Introducing the TACKLIFE MIG IGBT welding machine:

Using the latest Inverter technology to dramatically reduce overall footprint, as well as IGBT monotubing to significantly increase efficiency compared to normal MOS tubing. As well as size, Inverters dramatically reduce the power required to weld, increasing efficiency by 30%, whilst producing a constant power supply for a more stable welding arc. It can weld stainless steel, alumium,cast iron and nickel alloys.

Product description

"Features: - Easy to Use and Convenient to Carry - Powerful and Rugged MIG Welding Machine up to 120 Amp Output - Nice Machine Appearance and Screen Printing - Anti-corrosion & Water Resistant Metal Machine Case - Easy to Read the Numbers of Scale - Test Data Supports Stable Performance and Output Voltage - Protects Components and Transformer from Corrosion and Damage - 10% Rated Duty Cycle, Weld for One Minute, Rest for Nine Minutes - Adjustable Welding Speed up to 6.7m per Minute - Supports Dual Voltage 110V/220V, Wire Feeder 1-12V - Accepts 0.8-1.0mm Flux-Cored Wire - 1.35KVA/4.2KVA Maximum and Minimum Power - 6.8mm of Maximum Thickness of Metal - Allows to Weld Steel up to 0.24-0.3 inches Plate Steel - Automatically Adjust the Inverter Pulse Width through Closed-Loop Control to Ensure the Output Stability What's in the Box: - Welding Machine - Welding Gun - Ground Wire Clip (1.6 meters) - Brush - Protective Mask - 2.5m1.8m Big USA Plug Technical Specs: - Construction Material: Low Carbon Steel, Low Alloy Steel, and Stainless Steel - Power Supply: 110V/220V - Maximum Input Current: 110V/8A, 220V/19A - Frequency Response: 50/60Hz - Rated Input Power: 4.2KVA - Current & Voltage Adjustment Range (MIG) : 60A/17V-130A/20.5V - 40?60% Utilization Factor Output (MIG, A/V): (56A/16.8V) - 40?100% Utilization Factor Output (MIG, A/V) :(43A/16.2V) - No-load Voltage: 31V - Usable Wire: 0.02''-0.04'' -inch - Wire Feed Rate: 13m/min - Power Factor: 0.93 - Efficiency: 93% - Shell Protective Grade: IP21S - Insulation Grade: H - Welding Output: 60-130A,AC - Capacity: 18 gauge (0.039") to 3/16" (0.24") mild steel only - Not for welding aluminum - Duty Cycle: 10% @130A - Open Circuit Voltage: 20.5V - Welder Tips / Wire Size Installed tip will accept 0.031" Flux-Core wire - Wire Spool Capacity: 2.2 lbs. Spool - Recommended Circuit Breaker: 30A time-delay (slow-blow) breaker (30A for maximum performance) - Extension Cord Recommendations: 3 conductor #12A or larger up to 4.9 ft. - Generator Requirements: Minimum 4,000W continuous output with no low-idle function (or low-idle off) - Product Dimension (L x W x H): 13.4'' x 7.5'' x 14''-inches"

• 10% RATED DUTY CYCLE: The SereneLife Digital MIG Welding Machine features 10% rated duty cycle which allows you to weld for one minute then rest for nine minutes. Uses 0.8-1mm flux-cored wire. Perfect for entry level and professional welders
• 0.24-0.3” PLATE STEEL: This powerful & rugged MIG welder machine features up to 120 Amp output that allows you to weld steel up to 0.24"-0.3" plate steel. Supports dual voltage 110V/220V, wire feeder 1-12V w/ 1.35KVA/4.2KVA maximum and minimum power
• ANTI-CORROSION MACHINE CASE: The handy MIG welder features anti-corrosion and water resistant metal machine case w/ nice machine appearance and screen printing. Protects components and transformer from corrosion and damage
• ADJUSTABLE SPEED: Adjust speed up to 6.7m per minute so you can dial in the perfect weld. Test data supports stable performance & output voltage. Automatically adjust the inverter pulse width through closed-loop control to ensure output stability
• PORTABLE DESIGN: The multipurpose welder features a convenient carry handle, easy for transport & storage. Very convenient, can be used anywhere you need. Includes welding gun, ground wire clip (1.6m), brush, protective mask & 2.5m²1.8m Big USA Plug

User questions & answers

Question:	Is this machine good for weld stainless steel
Answer:	It is on the back side
Question:	can you use either 120 or 240 volts
Answer:	You'd better use a 35amp bigger breaker, the rated input current is 33A. And yes you can use that generator.

• 【IGBT INVERTER】- IGBT in inverter technology features with current control, high quality,stable performance;Small-sized, light-weighed,easy to operate,economical,practical.
• 【DISTINCT PANEL】- Switching welding mode easily. Also equipped with distinctive LCD monitor which demonstrates voltage and amps for your inspection. It's easy to inspect and use.
• 【INNER WIRE FEEDER】- High quality Integrated wire feeder to ensure smooth wire feed,adjustable welding voltage and current. Go with smooth average speed and powerful large motor.
• 【EFFICIENT RADIATOR】- It has a efficient cooling system to protect welding machine from damage. There are holes on both sides and a strong cooling fan on reverse side to dissipate heat.
• 【EFFICIENT RADIATOR】- It has a efficient cooling system to protect welding machine from damage. There are holes on both sides and a strong cooling fan on reverse side to dissipate heat.

User questions & answers

Question:	Can i mig weld with solid core wire and argon gas
Answer:	Yes, both voltages work with this machine.
Question:	How large of a wire spool will this hold
Answer:	It is about 2 minutes for cooling down.
Question:	are you sure that it can used 33 ls spool 0.9 mm
Answer:	Hi,this mig welder doesn't support a spool gun.

Product features

IGBT Inverter

• IGBT in inverter technology features with current control, high quality,stable performance;Small-sized, light-weighed,easy to operate,economical,practical. The IGBT welder is also equipped with overcurrent, overvoltage, overheat protection, etc.

MULTI-FUNCTION PANEL

• Easy switch for switching welding mode swiftly. Also equipped with distinctive LCD monitor which demonstrates voltage and amps for your inspection. It has adjustable wire feed speed button, you can adjust it to suit your application and weld with different thicknesse.

INNER WIRE FEEDER

• Using high quality Integrated wire feeder to ensure smooth wire feed,adjustable welding voltage and current. The full-size MIG platform, 60% duty cycle ensures long time welding, go with smooth average speed and powerful large motor.

EFFICIENT COOLING FAN

• The advanced cooling system offer built-in over-heat protection, over-voltage protection, under voltage protection. Ensure the plasma cutter have a stable and durable high performance and safety in operation is assured.

COMPACT & PORTABLE

• The design of this welder features the compact body shape, combined with the convenient handle; makes it light and easy to move. So you can carry it to the place you want easily.

WIDELY USED

• It is perfect for welding normal thin steel and iron, perfect for home DIY and general repairing work. Mini size but also practical, it will obtain a professional finish in welding. Features a easy carrying handle, light weight, compact design, easy for translation and storage.

MIG-250 Inverter Welder

• The MIG-250 is intended for arc welding in the MIG / MAG mode of metal products and structures made of low-carbon and low-alloy steels in a protective gas medium with a melting electrode wire or powder (flux) wire without gas. The welding machine can also be used for manual arc welding with a piece electrode in MMA mode, and also be used as a current source for argon-arc welding.