14 best hobby soldering iron

A hobby soldering iron is a versatile tool used for soldering, which is the process of joining two or more metal components by melting a filler material (solder) to create a strong electrical or mechanical connection.Hobbyists often use soldering irons for various DIY projects, electronics work, and repairs. Here's what you should know about hobby soldering irons:

  1. Basic Function: A soldering iron is a hand-held tool with a heated metal tip that reaches a specific temperature suitable for melting solder. When the soldering iron's tip touches the joint between two metal components, the solder melts and forms a bond as it cools down.

  2. Types: There are various types of soldering irons, including simple pencil-style irons, temperature-controlled irons, and soldering stations. Hobbyists often opt for temperature-controlled irons or soldering stations because they offer precise temperature regulation and consistent results.

  3. Temperature Control: Temperature control is crucial in soldering to prevent overheating and damaging sensitive electronic components. Hobby soldering irons with adjustable temperature settings allow users to work with a wide range of materials and applications.

  4. Soldering Tips: Soldering irons come with interchangeable tips of various shapes and sizes to suit different soldering tasks. Flat tips, pointed tips, chisel tips, and fine tips are common choices.

  5. Solder: Solder is the material used to create the connection between the metal components being soldered. It typically comes in wire or reel form and is available in different compositions, such as lead-free solder or solder with lead.

  6. Flux: Flux is a substance applied to the soldering joint to clean and prepare the metal surfaces for soldering. It helps improve the flow of solder and ensures a reliable connection.

  7. Applications: Hobby soldering irons are used in a wide range of applications, including electronics repair, circuit board assembly, jewelry making, stained glass work, model building, and more.

  8. Safety: Safety precautions are essential when using a soldering iron. This includes using appropriate safety gear, working in a well-ventilated area, and avoiding contact with the hot tip to prevent burns.

  9. Maintenance: Regular maintenance of the soldering iron is necessary to ensure its longevity and performance. This includes cleaning the tip, tinning it with solder, and storing it properly.

  10. Skill Development: Soldering is a skill that improves with practice. Beginners may want to start with simple projects to develop their soldering skills before tackling more complex tasks.

In summary, a hobby soldering iron is a valuable tool for DIY enthusiasts and hobbyists engaged in various soldering projects. It allows for the precise joining of metal components, making it a fundamental tool in electronics, crafting, and other related fields. Understanding temperature control, using the right solder and flux, and following safety guidelines are essential for successful soldering work.

Below you can find our editor's choice of the best hobby soldering iron on the market
  

Soldering Iron Kit, 60W Soldering Iron with Interchangeable Iron Tips, 5-in-1 Adjustable Temperature Soldering Welding Iron Kit for any Hobby Enthusiast 110V US Plug

Q-MING

Based on 1 reviews Check latest price
  • 🌟60w 110v pencil-type soldering iron features adjustable temperatures(392 ℉-842 ℉/200-450 ℃), very easy to use and features an on/off switch.
  • 🌟15s Quickly heats to working temperature. Our soldering iron features an advanced ceramic heating core to heat up to reach the desired temperature rapidly in around 15 secs, so that you can work faster. This pencil type soldering iron function is more powerful than a soldering station. Its heat output to hold at a constant temperature.
  • 🌟Kit Includes soldering iron, simple stand, conventional sponge, 5pcs interchangeable iron tips, 50g fine 0.6mm tin lead rosin core 60/40 tin-lead solder, 50g no-clean solder rosin flux paste. A good basic soldering iron set that has all the materials you need to get started.
  • 🌟For basic electronic work on circuit boards, jewelry making and repair, as well as most model work, this unit will do it all. Tips: Do not to solder onto dirty metals and things not intended to be soldered.
  • 🌟All MINGQ products and tools are backed by our manufacturer 30-day money-back guarantee and lifetime customer support

User questions & answers

Question: Is it heating up fast
Answer: Also a women's 9. The 7 was too small for me in the toe area. The 7.5 fits much better but I have a problem with the heel slipping.
Question: Does this come with any Flux
Answer: It will be a little bit smaller, but I have no such problem with the same shoes I bought in other places, they are all very standard sizes there, this is the place, link:bronaxshoes。com
Question: How long does this take to heat up
Answer: Ordered 2021. These are definitely fake. Sizes are off and heel looks different. Quality is bad as well. I’m holding them next to my 5 year old Sambas I bought directly from Adidas and they are not the same.
Question: Can it be used to fix jewelry
Answer: parqa mi hijo de 9 aĂąos compre talla L

Product features

Soldering Iron Kit

MINGQ Soldering Iron Kit is a big help in your soldering needs. Pencil style irons that is easy to use and and suitable for hobbiest use. With this multifunctional tool kit, you can repairing various electronics and circuit board, like welding, jewelry, guitar, watches, wiring, mobile device, computers hardware, small electronic work, TV capacitors or accessories, trinkets of children, crafts and more.

Solder wire

Good solder ability both in electrical conductivity and thermal conductivity

Wire Stripper Tool

a necessary accessory when you need to punch down excess wires/leads

Soldering iron stand

The soldering iron stand can effectively protect the iron from being ironed at high temperature or the iron tips dropping on the ground.

CONVENTIONAL SPONGE:

Using a conventional wet sponge will help to keep the soldering iron tip clean by removing the oxidation that forms.

rosin flux paste

increase the efficiency of the soldering process;

prevent corrosion or oxidation on the soldered area;

keep the soldering area clean and smooth.

SOLDERING IRON :

Operating at 60W and 110V, this soldering iron can be adjusted to six different temperatures: 200℃, 250℃, 300℃, 350℃, 400℃ and 450℃.

Digital multimeter

Accurately measures AC/DC Voltage, DC Current, Resistance, Frequency, Capacitance measurement and diode testing.

5-in-1

Includes soldering iron, simple stand, conventional sponge, 5pcs interchangeable iron tips, 50g fine 0.6mm tin lead rosin core 60/40 tin-lead solder, 50g no-clean solder rosin flux paste.

17-in-1

Comes with soldering iron(60w, 110v), soldering stand, cleaning sponge, wrench, pliers, desoldering pump, tin wire solder tube, anti-static tweezers, wire stripper tool, brush and Solder paste, 5pcs soldering iron tips set, portable toolbox.

19-in-1

Comes with soldering iron(60w, 110v), soldering stand, cleaning sponge, screwdrivers, 22 AWG wires, desoldering pump, tin wire solder tube, anti-static tweezers, wire stripper tool, solder wick and Mini PCB, 5pcs soldering iron tips set, portable toolbox.

24-in-1

Comes with soldering iron, soldering stand, cleaning sponge, screwdrivers, 22 AWG wires, desoldering pump, tin wire solder tube, tweezers, wire stripper tool, solder wick and PCB, 5pcs solder tips, Knife, wristband, digital multimeter, portable toolbox.

Weller WLC100 40-Watt Soldering Station

Weller

Based on 3 reviews Check latest price

Product description

This 40 watt Soldering Station from Weller features a quality lightweight pencil iron and a cushioned foam grip with replaceable heating element. This product is ideal for hobbyist, DIY enthusiasts and students.

The Weller WLC100 Soldering Station includes everything you need to start using solder to join metals and create efficient, electrical connections. Designed with the hobbyist and the do-it-yourself enthusiast in mind, this kit features a high-quality, lightweight pencil iron with variable power control, a cushioned foam grip with a replaceable heating element, and a safety guard iron holder. And it’s from Weller, the world leader in soldering since 1945.

  • High performance analog soldering station produces up to 900° F to handle many soldering projects
  • Variable power control dial adjusts power from 5 watts to 40 watts for accuracy
  • Quality, lightweight pencil iron with cushioned foam grip provides extended comfort during long term soldering projects
  • Includes: a Weller certified ST3 iron plated tip for long life and consistent performance, a built in soldering holder to safely rest your pencil, and a cleaning sponge to remove unwanted residue from soldering for next time use
  • UL Listed: Tested and meets independent safety standards

User questions & answers

Question: How long does it take to heat up enough to work with
Answer: Yes it is ESD Safe.Regards,SashaCustomer Service TechX-Tronic International, Inc.
Question: could i swithc out the iron and plug a differnt soldering iron in if i wanted
Answer: As the rest of our customers answered, it comes with one soldering tip.Extra tips of all sizes/styles are available on our website at www.XTronicUSA.comI might also note that Hakko & Aoyue tips are interchangeable with X-Tronic unitsRegards,SashaCustomer Service TechX-Tronic International, Inc.
Question: Details say you can adjust the iron from 5 to 40 watts. What range is that in F degrees
Answer: X-Tronic products are made at our factory in China with our inspectors over at our factory, but no parts of them are made in the USA.It would be nice if it was possible, but we have costed it out three times in the past 9 years and the retail prices would be three times what they are now.Regards,SashaCustomer Service TechX-Tronic International, Inc.
Question: How often do the tips need to be replaced? my radioshack 40 watt iron was always melting tips
Answer: I use tips that fit hakko 900 sub series

Product features

Analog Station

Capable of producing temperatures up to 900°F to handle many soldering projects. The station includes a Weller certified ST3 iron-plated copper tip to help keep the temperature consistent while making soldering joints.

Easy-to-Adjust Variable Power Controls

The WLC100 features a variable power control that lets you accurately adjust the power level from 5 watts to 40 watts with a simple turn of the knob. This allows you to choose the precise setting for each unique job that you tackle, confirming proper power for the application.

Durable Pencil Iron

Lightweight pencil iron features a cushioned foam grip-handle, ensuring you can work comfortably.

ST Solder Tip Compatibility

Weller ST tips are constructed of solid copper and are plated with iron as well as nickel and chromium to protect against corrosion and solder creep, helping to ensure that your tools perform reliably over time.

WLC Variable Power Control Soldering Station

The WL100 includes: one variable control soldering station with built-in safety stand and cleaning sponge (WLC 100), one soldering pencil (SPG40), and one ST soldering tip (ST3).

The WLC100 is acceptable for use on audio equipment, crafts, hobby models, jewelry, small appliances, and home electronics.

Vastar Soldering Iron - Soldering Iron Station, Anti-Static Soldering Iron Station Kit with On-Off Switch Temperature Adjustable

Vastar

Based on 1 reviews Check latest price
  • Adjustable temperature analog soldering station produces temperatures up to 480°C to handle many soldering projects
  • The variable power control knob adjusts power from 5 watts to 60 watts to ensure precision
  • Using internal thermal ceramic heating element, higher efficiency and long life.
  • Adjustable temperature using the latest temperature control circuit, adjust the temperature faster.The Steel tubes made of high strength 304 stainless steel
  • Soldering iron platform and Host integration, not only easy to operate but also save the place.Built-in welded bracket can be safely placed pen and a cleaning sponge to remove unwanted residues from the soldering for next use.

User questions & answers

Question: Is there any LED light on the unit to indicate if it is powered on
Answer: Yes, the clip can be removed, and you can screw in other things. The screw dimensions would need to be the same though.
Question: is this safe to use on computer components
Answer: These don't have a magnetic base. You have to screw them on to whatever surface you're mounting them to. Quad Hands have some excellent magnetic base flexible arms.
Question: So whats the benefit of a soldering station versus just a regular single soldering gun
Answer: The clamps will hold something approximately 7/8 of an inch. We do not have larger clamps available at this time. The alligator clips do unscrew and can be replaced with another 8-32 threaded clamp.
Question: How do you know the temperature
Answer: The base is 9" x 6". The steel plate it is made from is 3/16" (not 1/8")

Product features

Vastar 60W Soldering Iron Station - Suitable for Beginners and Experts

Features:

  1. Vastar soldering station is a low-cost, high-quality, and safe 60-watt anti-static soldering station.
  2. The soldering iron set is light and refined, the iron frame is integrated with the host, and the floor space is small, which is very convenient to carry and use.
  3. The kit has a complete set of accessories, including anti-static tweezers, cleaner, tin wire, 5 types of soldering iron tips and instructions, which is convenient for your operation, and can be used by both beginners and professionals.
  4. The hot ceramic heating element is used inside the soldering iron tip, which can be heated quickly and has a long service life, allowing you to have a better experience.

Specification:

  • Power: 5W-60W
  • Soldering iron tip temperature: Up to 480°C

Beileshi 2.5X 7.5X 10X LED Light Helping Hands Magnifier Soldering Station,Magnifying Glass Stand with Auxiliary Clamp and Alligator Clips

Based on 1 reviews Check latest price
  • 【Multiple Magnification Lens】 3 kinds of interchangeable magnifying lens: 2.5X 90mm (diameter), 7.5X 34mm, 10X 34mm.Useful auxiliary tool in soldering and modelling field.
  • 【Convenient and Comfortable To Use】Desktop magnifier with led light. Distance and angle of lights can be adjusted freely,what's more, the support clamps and alligator clips are adjustable ,so you can feel more convenient and comfortable when you use it.
  • 【Humanization Design】Desktop magnifier with led light, an independent bright illuminating light with 5pcs of LEDs is installed on flexible metal tube, distance and angle of lights can be adjusted freely.It can be used as a desk lamp.
  • 【Powered By】Power supply by external adapter or 3 * AA batteries (Not Included).
  • 【Application Range】Hand Lens Close Work include Soldering PCB’s, Macro Photography, Craftsmanship Engraving, Electric Circuit Board Repairs, Building Models, Hobby Arts & Crafts Projects, Painting Miniatures, Splinter removal, Needlepoint Work, Sawing Applications, Diamond/Jewelry Cleaning & much more.

User questions & answers

Question: Will this stand hold XLR cable ends for repair or is the holding clips too small
Answer: Yes they can as these bulbs are standard incandescent, so polarity is not an issue. That said I would wire in parallel and not series so that if one burns out you don't loss the whole light, just the bulb.
Question: Can it be handheld
Answer: If a 12v supply, then no. Otherwise, for higher voltages, you will need appropriate dropping resistors of adequate power. As with any incandescent bulb, brightness will be affected by voltage, and so will bulb life. I haven't tried on lower voltages, but I would think anything down to 9v should work satisfactorily.
Question: Just to be clear does this unit comes with a USA standard electrical outlet plug
Answer: Watched a YouTube video by a guy with more than a hundred lights on his indoor G scale layout. I followed his recommendation and purchased a 12volt 6 amp transformer for $16. It’s a type used for charging things. 6 amps will light 72 bulbs.
Question: US power adapter included
Answer: As long as it is a 12v power supply,the bulb will work well.

Product features

Beileshi 2.5X 7.5X 10X LED Light Helping Hands Magnifier Station,Magnifying Glass Stand with Clamp and Alligator Clips

Useful magnifier with interchangeable magnifying lens and illuminating led lights, it can be widely applied to electronic welding, modelling, stamp collecting, embroidery, antiques, biological observation, reading, etc.

The support clamps and alligator clips are adjustable. Ideal tool when third hand is required. The base surface is padded with steel sheet to increase base weight and reinforce stability. Powered by external power adapter of 3 * AA batteries (not included).

Read Maps
Integrated Circuit
Watch Repair
Model Painting
Alligator Clips

The Alligator clips can be adjusted freely, so you can feel more convenient and comfortable when you use it.

Magnifying Lens

3 kinds of magnifying lens: 2.5X, 7.5X, 10X. Useful auxiliary tool in soldering and modelling field.

LED Illumination

An bright with 5 LED illuminating light is installed on flexible metal tube, distance and angle of lights can be adjusted freely. So it can be used as a desk lamp.

External Power & Battery Holder

Input 110-240V 50/60Hz, Output: DC 4.8V 250mA also can powered by 3 * AA Battery (Not Included)

Soldering Iron Kit, 80W Digital LCD Solder Gun with ON/OFF Switch Adjustable Temperature Controlled and Fast Heating Thermostatic Design Welding Tools for Electronics

Based on 57 reviews Check latest price
  • 【Use Imported 80W High-Power Heating Core】: High power and more efficient, which delivers superior heat conductivity and can be quickly heated up to operating temperature, greatly save your working time
  • 【Upgraded and Smarter Design】: High definition LCD screen display, the temperature status more clearly. Adjustable temperature design(from 392℉ to 842℉), adjust the temperature according to your need by the knob wheel on the electronic soldering iron. On/Off button and working indicator light, can be freely and easily open,close and operate
  • 【Rich and Functional Accessories】: Unique LCD display soldering iron, ideal rosin flux, 5 Pcs different shapes iron tips, hight quality 50g/0.8mm tin wire, stainless steel stand, highly absorbent sponge pad. With them, you can carry out welding and repair work at any time without having to purchase other accessories
  • 【Wide Range of Applications】: The soldering iron sets are suitable for DIY, various repaired usage of electronics and circuit board, welding, jewelry, guitar, watches, wiring, mobile device, computers hardware, small electronic work, TV capacitors or accessories! It suitable for beginner study electronic engineering and electronics hobbyist
  • 【Portable and Easy to Use】: It's very small and lightweight, no need soldering station, just plug and play.You can take it anywhere and you will be able to find the tools you need in the carry bag

User questions & answers

Question: I need to use it with 220V. Is it possible
Answer: Dear customer, This soldering iron is suitable for voltages from 110V to 220V. It will automatically match the current voltage, and you do not need to perform additional operations. Hope my answer can help you, please feel free to contact us if you have any questions. Best regards, Winni
Question: what type of solder is it
Answer: 50g/0.8 tin wire. Hope this helps.
Question: Is there anything special about this soldering iron
Answer: It' has small, precise tips and low-heat for electronics where you don't want to melt more than just your soldering point. You'll want to use low-temp solder with it.
Question: Is the power 80 watts as described
Answer: The only way to know the answer to your question is to measure the resistance of the iron and then measure the current flowing thru it during operation. But having said that, I can tell you that it heats up very quickly and delivers great heat to the point of application. It is for soldering circuits. It does this very very well.

Weller WLC200 80 Watt Hobby and Stained Glass Soldering Station

Weller

Based on 430 reviews Check latest price

Product description

Weller designed the WLC200 from the ground-up to deliver a complete and simple process for soldering, especially for stained glass projects. This soldering station combines adjustable, powerful heat with ease-of-use features to handle any consumer soldering project.

From the Manufacturer

Weller's stained glass 80-Watt soldering station. Includes an 80-Watt soldering iron that is lightweight with a cushioned foam grip. Soldering iron also has a replaceable 3/8-Inch iron tip. In addition, the unit comes with a soldering station that includes a safety guard iron holder, sponge tip cleaning pad, On/Off switch with "power-on" indicator light and a variable power control from 5 to 80-Watt.

  • Adjustable power range from 5 watts to 80 watts provides the variable, controlled temperature needed for a range of hobbyist jobs
  • Includes station base, SPG80 lightweight pencil soldering iron ideal for midsize work, 3/8” chisel tip, pencil iron holder, and cleaning sponge
  • The fully removable soldering iron and replaceable heating element let you upgrade or customize your station
  • Produces up to 900° F of controllable, reliable heat fast and recovers that heat quickly to keep your workflow efficient
  • Comes with 3/8” Chisel Tip (MTG20) and compatible with the MTG21 1/4" chisel tip and MTG22 .375” cone tip Weller pencil soldering iron tips
  • Sponge built into the base unit can be used to keep tip clean and extend the part’s life

User questions & answers

Question: Can I get a fine point tip for the 80-watt station to do fine electronics work
Answer: this welding tool will take 15 seconds to heat up
Question: Can i use this for circuit boards? Is it stained glass only
Answer: Sorry cant be used for fixing Metal Jewelry. Most soldering irons or guns are used for soldering electrical wires together, which requires less heat. The Max temperature of our solder iron toll is 842 Fahrenheit, dont get hot eought to melt large jewelry metals.
Question: What is the temp range? I want to melt Alumaloy rods that melts at
Answer: My hubby bought it but honestly it’s a bit small- better for a woman
Question: what size tip comes with the unit
Answer: DSW, The Shoe Dept, Lyst, Tredsey, Nike Outlets...just to name a few

Product features

Adjustable Temperature Range

The 5 watt to 80 watt range of adjustable temperature heats the iron quickly and recovers that heat again after use, speeding up your workflow and making the long wait for a heating iron a thing of the past.

Complete Soldering Station and Quality Pencil Soldering Iron

This station comes complete with every accessory needed for a hobbyist’s mid-sized soldering needs; the Weller SPG80 lightweight pencil iron, a replaceable 3/8” chisel tip, an iron holder, and a cleaning sponge.

Reliable Chisel Tip and Replacement Tip Compatibility

The 3/8” Chisel tip that comes with this set is designed for stained glass applications and can be easily replaced. All Weller soldering tips are made from a copper core with iron, nickel, and chromium plating to protect against corrosion.

Performs a Range of Jobs

This station’s variable temperature can be set as low or high as the job requires, letting you solder a wide range of applications including stained glass, home electronics, jewelry, and hobby models.

LDK Soldering Iron Kit Electronics, [Upgraded] Full Set 60W 110V Adjustable Temperature Welding Tool with 5pcs Different Tips, Stand, Tweezers, Sponge, Solder Sucker, Solder Wire and User Manual

LDK

Based on 1 reviews Check latest price
  • Adjustable Temperature from 200℃-450℃ (392℉ to 842℉ ). Heat up fast and work great.
  • The Solder Tin/Lead 60/40, Dia 1.0mm, 13g, Flux 2.0%, Melting Point: 183℃.
  • Upgraded Heat Resistant Material and the steel-pipe four ventilation holes on the soldering iron design helps cool fast.
  • Desoldering Pump - High pressure vacuum tube with aluminum body frame, best for removing solder from PCB through hole solder joints.
  • 5 Different Tips to meet all your soldering needs. Best gift idea for DIYer, various repaired usage of electronics and chipboards, welding, jewelry, guitar, watches, wiring, mobile device, computers hardware, small electronic work.

User questions & answers

Question: Does the solder come with flux infused into it
Answer: Hello TechGuy, Your Alumaloy rod meltdown is around 865 to 1240 degree F. The Weller 80 Watt Solder has a maximum 900 degree F. I probably use a solder that has a higher wattage that can go beyond 1,000 degree F. Thanks ! Jameco Electronics.
Question: Does it works with 220v voltages
Answer: It comes with a 1/4" tip. I like a smaller tip to be preferable for my soldering, (Tiffany style), smaller, less heavy seams lines. The problem I had was with the regulator stand itself (heat controller built into the stand as opposed to being built-in to the soldering iron itself). The stand element went out on the control unit stand within a couple of uses. No discernible reason, just stopped working. I plugged in the iron and it never got hot. Plugged it into another regulator, and the iron heated up, so it had to be the stand. I bought a HAKKO FX-601 and have used it repeatedly with no problems. It has a dial to adjust the temp you want on the handle and it maintains the temp. Slightly more pricy but worth it. I want dependability.I still use the Weller stand for holding my solder irons, but not as a temperature control unit. So for what it is worth, there you are.
Question: Is this solder iron ESD
Answer: yes 60w heat up quickly as advertised. Great soldering iron set
Question: is it a U.S. plug
Answer: this kit no fluxs included, we have other kits come with flux, you can see other soldering iron kit on our store's home page, thanks

Product features

Specification

  • Work voltage: 110V
  • Power: 20W-60W
  • Temp range: 200℃ ~ 450℃
  • Tips model: 900M series
  • Tips cleaning: Sponge
  • Soldering stand: Stainless Steel
  • Anti-Static tweezers: ESD-15
  • Soldering wire: Tin/Lead 60/40 1.0mm 13g, 2.0% Flux
  • Desoldering Pump: 7.36 inches (L) x 0.75 inches (Dia.);

Package Included

  • 1 x Adjustable Temperature Soldering Iron: From 200℃ to 450℃ (392℉ to 842℉ )
  • 5 x Extra Different Soldering Tips
  • 1 x Solder Wire
  • 1 x Anti-Static Tweezers
  • 1 x Solder Sucker
  • 1 x Cleaning Sponge
  • 1 x Soldering Iron Stand
  • 1 x User Manual

How to solder

  1. Prepare LDK soldering stand and soldering iron; Keep the iron tip clean, without any oxides and carbides, applying tin to plate on the surface, especially the first time
  2. Please wet the sponge before using
  3. Use the soldering iron to heat the weldment, such as PCB leads and pads, and keep the weldment heated evenly
  4. When the temperature is high enough, put the solder wire close to the joint, the solder will melt and flow freely
  5. Please remove the solder wire when the tin is enough
  6. Take away the soldering iron in a direction approximately 45° and power off
  7. Place it in the holder while it cools enough safety

Soldering Station, Merece Digital Soldering Iron Kit w/ 176℉-896℉ Adjustable Temperature (C/F), Standby & Sleep, Temperature Lock, 5 Solder Tips, Tip Cleaner, Solder Wire, Sucker - Fast Heating Up

Merece

Based on 1 reviews Check latest price
  • 【Fast Temperature Rise & PID Temperature Control】 Paired with rapid heat system reach the melting point 572℉ in just 15 seconds, no long heating process before using. Wider adjustable temperature range: 176°F~896°F/80°C~480°C, greatly meet the different temperature needs of the user. PID temperature control, detect temperature every 20ms for quick temperature return, stabilize heater core temperature at Âą3.6°F/Âą2°C, effectively solves cold solder joint problems.
  • 【LED Screen Display &℉/℃ Conversion & Auto Sleep Function】Come with LED screen display function, make mode selection more intuitive. With Fahrenheit and Celsius conversion function, users can choose between Fahrenheit and Celsius to meet their different usage habits. When not used for 10 minutes, the soldering station automatically enters standby mode, when not used for 20 minutes, it will automatically enters sleep mode. Adjusting the knob, it can get back to normal work mode.
  • 【Hot Ceramic Soldering Iron Heater & Stainless Steel Pipe】With 65 watt hot ceramic soldering iron heating core, significantly increases the life of the soldering station. Ultra-high temperature melts the solder material, make the weld stronger than other station did. Build-in stainless steel pipe, prevent high temperature aging steel tube. Come with anti-static design, no need to worry accidental electrostatic touch, provide users a safer using environment.
  • 【Perfect 12-In-1 Soldering Kit】Upgraded Merece 65 Watt Soldering Station with 5 x Additional Soldering Tip, 1x Bracket for solder On The Side, 1x Roll of Lead-free Solder Wire (0.8mm/50g), 1x Solder Sucker, 1x Brass Tip Cleaner, 1x Extra Sponge Tip,1x Instruction Manual.
  • 【Certifications Of FCC, CE, RoHS & 100% Excellent Service】ST-2090D passed certifications of FCC, CE, RoHS. Applications for SMD / DIP / SOIC welding, DIY hobbies, appliance repair, factory production or hot stamping. MERECE provides worry-free warranty and lifetime professional customer support. Please don’t hesitate to contact us if have any question about our product or the instruction. We will reply to you no more than 24 hours (Mostly under 12 hours) with the most satisfactory solution.

User questions & answers

Question: Can you use this to make jewelry
Answer: It did heat up quickly, however, I want you to know that I purchased it 28 October 2014 and it quit working in early December. It does have a 7 year warranty, but now I need to find out how to contact Weller.
Question: Is the quality of extra five solder tips different from the original one
Answer: Will the weller sp40n iron work with the weller wlc100?
Question: What kind of solder is recommended to be used with this station
Answer: That is the issue with this type of power control, that it won't have consistent temperatures. The resultant temperature will depend on how long you let it pre-heat, how long you let it recover from the last solder joint made, and the tip shape. Let's just say that it does have enough power to melt any solder you'll come across but at only 40W, not necessarily a large pool of it, or if there's a lot of copper to 'sink the heat away, for example on a power or ground plane of a PCB. If specific temperatures are important then you will probably be happier with a temperature regulated iron, where you set the temp wanted and it has a thermal sensor for feedback, or in the case of some wellers (maybe other brands now too) that is built right into the tip to cycle on/off at the temperature of the element you choose to install.
Question: Should I get this or the Yihua
Answer: I've put about 3 oz of solder through the original tip (mostly 60/40 flux core) and I also occasionally take 220 grit sandpaper to keep the tip nice and shiny (I've owned this iron for about 2 years). The tip still looks brand new once cleaned up a bit.

Product features

Weld firmly & PID Control

5 free types of replaceable soldering tips, 65 watts thermal ceramic heater, weld firmly, easy to replace, long service life.

PID temperature control technology cycles every 15 milliseconds to detect the temperature of heating element, then quickly corrects it with a rapid return to the set temperature.

High Power & Rapid Heating

Using 65W high power, the solder station takes only 15 seconds to reach the temperature of 572°F. Gets the job done quicker with fast heating up and more efficiency.

Timely temperature compensation avoids false or virtual welding caused by solder temperature change, prolongs the life of the tip.

High Stability & Wide Temperature

Wide temperature controlled range: 176°F ~ 896°F / 80°C ~ 480°C. Suitable for high temperature welding scene and low temperature application. Meet more occasions.

High temperature stability: ¹3.6°F / ¹2°C. Precise temperature control makes welding more controllable and reliable.

C/°F Conversion & LED display

Centigrade/Fahrenheit conversion function applies to user habits, displays temp. in Fahrenheit or Celsius scale. You can short press LOCK/℃/℉ button to switch them.

Digital LED display makes temperature control more visible and easy. See the temperature in real-time.

Temperature Locking

Press LOCK/℃/℉ button for 3 seconds under working mode, the current temperature will be locked and won't be changed by turning the knob button. Screen displays LOC for locking temperature.

It meets constant temperature operation, without unexpected changes.

Auto Standby & Auto Sleep

The soldering will auto standby after 10 minutes when it's not in use, heater is heating up to 392℉.

The soldering station will auto sleep after 20 minutes when it's in auto standby mode, the heating core is not heated.

Prolongs iron’s life, energy-saving.

PRODUCT DETAILS

  • Power: 65 watts
  • Temperature range: 176°F~896°F / 80°C ~ 480°C
  • Temperature stability: Âą3.6°F / Âą2°C
  • Item weight: 2 pounds

ADVANCED FEATURES

  • Anti-static design
  • Digital LED display
  • Temperature locking
  • PID control & Fast heating up
  • Auto standby & Auto sleep
  • °C/°F conversion function
  • Security Level: FCC CE RoHS ESD safe

LEXIVON Butane Torch Multi-Function Kit | Premium Self-Igniting Soldering Station with Adjustable Flame | Pro Grade 125-Watt Equivalent (LX-771)

LEXIVON

Based on 1 reviews Check latest price

Product description

Here’s How You Can Save Your Time & Effort With Our Butane Soldering Torch Kit:

When it comes to copper pipe brazing, circuit board wire soldering or cutting heat sensitive materials, you cannot afford to settle for low-quality and impractical micro butane torches. What you need is a dependable and ergonomic cordless soldering heat gun kit that will help:

SAVE YOUR TIME: the large-capacity tank will refill in just 15 seconds allows for up to 2-Hours run time completely uninterrupted.

SAVE YOUR EFFORT: just use the convenient Flame Lock-On function and perform other tasks while your butane torch keeps working.

Presenting The LEXIVON 12-Piece Butane Soldering Torch Kit For Professionals!

Take all the hassle out of your Soldering/Brazing projects, crafts and hobbies with our durable and ergonomically designed, multi-use butane heat torch. Use the electronic ignition button to start up your soldering torch and control your working temperature with the flame control slider.

3 Reasons To Choose Our Butane Torch Set:

• Advanced Features – our portable wireless butane torch features a gas control knob, a flame lock-on function and a large tank that will make your job easier.

• Unmatched Versatility – our micro butane torch is ideal for soldering, plumbing (pipe welding), wood burning, jewelry processing, culinary work (crème brulee) and hot shrinking.

• Convenient Carry Case – keep all your butane powered soldering torch accessories neatly organized in the handy carrying case.

Here’s What You Get:

Wireless Butane Torch

6 Handy Tips For Soldering, Cutting, Shaping, Hot Air, Wide Blower & Deflector Tip

Sponge For Easy Cleanup

Soldering Kit With Wrenches

Don’t Hesitate!

Click “Add To Cart” NOW & Get Your Butane Soldering Torch Today!

  • A MUST-HAVE BUTANE TORCH FOR YOUR MASTERPIECES: Use the LEXIVON 12-piece butane powered soldering set in a wide range of different applications, from wood burning to wire soldering.
  • TAKE CONTROL INTO YOUR OWN HANDS: Adjust flame from 1/2" to 2" with working temperature up to 2400° F, hands-free operation with the attachable base stand.
  • OUR BUTANE SOLDERING TORCH IS MADE TO LAST: 100% Metal refillable fuel tank will last longer than common plastic tubes. Pre-tested for leakage and ignition capability.
  • CONVENIENT HANDS-FREE FLAME LOCK-ON: The large tank capacity with standard butane gas allows for up to 2-Hours run time, fully refills in 15 seconds so you can stay on the job.
  • YOUR SAFETY IS OUR TOP PRIORITY: Newly designed with Ignition stopper to meet the U.S. CPSC-Child resistance standard requirements. (Attention - butane is NOT included)

User questions & answers

Question: Does a butane bottle snap in or do you transfer the liquid like the refillable clicker lighters
Answer: In the Plymouth indiana and surrounding towns like south Bend and mishawaka, I have found that hardware stores and Phillips gas stations ran by out of town folk whom are very curious and polite carry the best and most affordable cans of butane and even Lowe's carries one brand. All of them work very well in this torch. What is unique about the Drexel is that almost any butane filler fit very well and when the Drexel is full the butane starts to spew out of the filler nozzle letting you know it is full. Many other torches give you no idea whether they are full or not.
Question: Which premium refined butane fuel is best to use? what brands are recomended
Answer: NO, you have to provide butane-pressurized butane cannot be shipped. Filtered butane is best
Question: Can you weld silver jewelry with this product
Answer: I have had several butane soldering irons over the years made by Master and Cooper Tools. They were good and served the purpose. The Dremel model is a well made tool and I must say that this kit covers anything I might consider using a hand held butane torch for. I have to give credit to Dremel in that all of their tools measure up to high standards. As a technician and hobbyist, I do not tolerate crap-tools. This is not a crap-tool. I own three different styles of Moto-tools with the oldest one being over 20 years old. Dremel makes good stuff.
Question: Hi, is the torch come pre filled or empty and i need to fill it. Thanks
Answer: The dremel has a very nice locking mechanism that keeps the flame on, and while it's on the flame adjust knob, allows for a very small or a very adequate flame size. Be wary though when using the torch fla me at is most delicate and smaller size, it has a tendency to blow out very easy. When this happens don't freak or get upset, with your lock still engaged you just restart the automatic ignitor or a small flame Bic lighter and it relights very quickly and efficiently.

KOTTO Helping Hands Soldering, Third Hand Soldering Tool PCB Holder Four Arms Helping Hands Crafts Jewelry Hobby Workshop Helping Station Non-Slip Steel Weighted Base

Based on 973 reviews Check latest price
  • -'Third Hand' workshop handyman vice – Ideal for Soldering, Circuit board holder, Assembly, Repair, Modeling, Hobby, Jewelry, Crafts. Four adjustable metal gooseneck arms and stainless steel precision crocodile/alligator tip clamps, with 360-degree rotation. The tight grips are strong enough for you to position your items freely
  • -Weighted base and Anti-Slip rubber feet: Solid weighted steel construction, powder-coated with industrial-grade rubber feet ensure a stable base that does not move. The rubber feet protect your work surface from scratches and scuffs.
  • -The alligator clamps are made of stainless steel. Our design allows the alligator clips to rotate a full 360 degrees for you to hold your project exactly how you need it. The design allows the clips to be easily rotated but strong enough to hold large projects in place.
  • -Helping Hands are perfect for various projects –Customers often use it for hobby projects, electronics, arts and crafts, figurine and model painting, as well as product design prototyping.
  • -US-based customer support, 30 days full satisfaction no question asked return period.

User questions & answers

Question: what country is this manufactured in
Answer: I don't know of any soldering iron that isn't ESD, but it is a ceramic core that is the heating element via conduction to a steel tip. The steel tip may develop an electro-static charge independent from the wand but it won't develop an ES charge from the wand itself. again IDK for sure.
Question: How much weight do the arms hold
Answer: Yes, standard U.S. ac plug.
Question: Can I easily screw off arms if desired
Answer: We can special order. Mabe 2 weeks.
Question: Are the arms held on magnetically Like other's
Answer: Mike. You can use it for circuit boards if you can find a very fine point tip to fit it and control the heat. I would suggest a pencil tipped battery operated 2 heat setting iron for this purpose however. It has a push button switch that shuts off the heat when you release it, and has a charger it sits in. I have used these for years in an industrial application. You can easily destroy a circuit board with 80 watts of heat output. I used the Weller to repair stained glass lamp shades because I needed the heat to melt the solder to the thicker copper foil. .Jim S

Product features

Flexible Arms Soldering Tool

Third Hand' workshop handyman vice – Ideal for Soldering, Assembly, Repair, Modeling, Hobby, Jewelry, Crafts

  • This Helping Hands Soldering Station with Flexible Metal Arms is Ideal for Soldering, Assembly, Repair, Modeling, Hobby, Jewelry, Crafts.
  • Four adjustable metal gooseneck arms and stainless steel precision crocodile/alligator tip clamps, with 360 degree rotation.
  • They are strong to keep a tight grip on your components allowing you position them wherever you like.
  • Solid weighted steel construction, power coated with industrial grade rubber feet ensures a stable base that does not move.
  • Stainless steel alligator clamps - can be rotated 360 degrees then "locked" into place with knurled thumb nuts.

Solid Steel Weighted base

Our laser cut solid steel base holdssteady while you position the arms however you like. Powder coated and heated to over 450F for a durable finish -it is the same process to make high end car wheels!

360 Degree Adjustment Alligator Clamps

The alligator clamps are made of stainless steel. Our design allows the alligator clips to rotate a full 360 degrees for you to hold your project exactly how you need it. The design allows the clips to be easily rotated but strong enough to hold large projects in place.

Sturdy, Flexible, Steel Gooseneck Arms

Our helping hands are made of steel not plastic, and they're threaded down through the base plate into the rubberized feet. That means they're extremely sturdy and extremely well supported.

Bright Color with Rubber Feet for Unrivaled Stability

- Made of solid weighted steel construction with powder coated bright yellow color, anti-scratch and long durability. Industrial grade rubber feet ensure a very stable base while protect your work surface from scratches and scuffs.

FstopLabs Helping Hands Soldering Tool, Third Hand Soldering PCB Holder Tool, Crafts Jewelry Hobby Workshop Helping Station

  • 'Third Hand' workshop handyman vice – Ideal for Soldering, Circuit board holder, Assembly, Repair, Modeling, Hobby, Jewelry, Crafts. Four adjustable metal gooseneck arms and stainless steel precision crocodile/alligator tip clamps, with 360-degreerotation. The tight grips are strong enough for you to position your items freely.
  • Weighted base and Anti-Slip rubber feet: Solid weighted steel construction, power coated with industrial grade rubber feet ensures a stable base that does not move. The rubber feet protect your work surface from scratches and scuffs.
  • Stainless steel alligator clamps - can be rotated 360 degrees then "locked" into place with knurled thumb nuts. 2lb weighted base prevents tips and turns, holds everything steady.
  • Helping Hands are perfect for various projects –Customers often use itfor hobby projects, electronics, arts and crafts, figurine and model painting, as well as product design prototyping.
  • US based customer support, 30 days full satisfaction no question asked return period.

60W Soldering Iron, Perfect Soldering Iron Kit for any Hobby Enthusiast(5-in-1) 110V

LDK

Based on 321 reviews Check latest price

Product description

CAUTIONS: When using the soldering iron for the first time, smoke will appear on the tip and stop in a short time. The smoke will not appear the next time you use it.

CAUTIONS: KEEP OUT OF THE REACH OF CHILDREN, as the tip of the soldering iron become very hot when plugged in. Rest a hot iron that is not in use on the included safety stand to avoid risk of fire. 



Specification:

Work voltage: 110V

Power: 60W



Package Include:

1 x Soldering Iron (60W 110V)

1 x Solder Wire (60%Sn, 40%Pb, 2.0% Flux, 1mm Dia., 10g)

1 x Soldering Iron Stand

1 x Rosin

1 x Cleaning Sponge



How to solder:

1. Prepare solder and soldering iron; Specially, it's necessary to keep the tip clean, which should be coated with solder.

2. Use the soldering iron to heat the weldment, such as PCB leads and pads, and keep the weldment heated evenly.

3. When the temperature is high enough, put the solder wire close to the joint, the solder will melt and flow freely.

4. Please remove the solder wire when the tin is enough.

5. Take away the soldering iron in a direction approximately 45°and power off.

6. Don't pull the soldering iron tip outward and use it in that way, which will shorten the heating element life.



Notes: For best performance and product life, clean and "tin" the iron's tip before and after use, and wipe clean with a damp rag after use, only after the tip has cooled.

  • LDK 60 Watt Precision Tip Soldering Iron
  • Features robust stress relief and replaceable tip
  • Quickly heats to working temperature
  • Includes 10g tube of rosin core 60/40 tin lead solder
  • 100% MANUFACTURER MONEY BACK GUARANTEE - LDK Guarantees All of It's Products and Tools for Life!

User questions & answers

Question: The plug looks like a european plug. does this unit come with a us 110 volt male plug
Answer: Definitely! The four arms just have one screw connecting them and don't need to be more than hand tight. You can easily remove the arms if you wanted to. The little claw hands screw off as well and are easily removed and/or replaced. The only caution I'd give is that the four little black feet aren't held on very well with adhesive and the screws hold them on. So if you wanted to remove an arm I'd recommend attaching the foot with super glue or something.
Question: Will this soldering iron get hot enough to melt holes in water bottle and soda bottle caps
Answer: No, they arms are screwed into a very sturdy, steel base with sturdy rubber feet.
Question: Just received this item, and am a complete newbie to soldering. why is the "rosin" that comes with this hard like concrete
Answer: Yes, the flux content: 2%
Question: What temp does this get up too when ready
Answer: Hello Daniel, It only works on 110v, Thank you!

Helping Hands Soldering,Third Hand Soldering Tool PCB Holder Magnetic Flexible Metal Arms Soldering Iron Holder Steel Weighted Base Crafts Jewelry Hobby Workshop

Based on 67 reviews Check latest price

Product description

WEIJIANG soldering helping hands with 4 arms, perfect for various projects : You can use our helping hands for all kinds of jobs, many customers use for hobby projects, electronics, arts and crafts. Painting figurine and models, as well as prototyping products and during production.

  • ➤'Third Hand' Workshop Handyman Vice : Ideal for Soldering, Circuit board holder, Assembly, Repair, Modeling, Hobby, Jewelry, Electronics, Arts, Crafts.Painting figurine and models, as well as prototyping products and during production.
  • ➤Weighted Base and Anti-Slip Rubber Feet: Solid weighted steel construction, power coated with industrial grade rubber feet ensures a stable base that does not move. The rubber feet protect your work surface from scratches and scuffs.
  • ➤360° Rotation Stainless Steel Alligator Clamps:Our design allows the alligator clips to rotate a full 360 degrees for you to hold your project exactly how you need it. The design allows the clips to be easily rotated but strong enough to hold large projects in place.WEIJIANG' steel gooseneck arms run through its rubber feet for added support, balance, and stability. Never watch your hard work go crashing to the floor again!
  • ➤Upgrated Portable Solder Iron Stand: Solder iron holder,composed of a plastic base and a metal stand which made of sturdy and heavy duty metal.Dual coiled springs of soldering stand holder to protect yourself from burning and protect the solder irons. Easy to carry and great for soldering,wood burning,solder iron hobbyists,electricians and users who works with solder.
  • ➤What You Get: 1*Heavy Steel Base, 6 pcs Pillars, 4*Flexible Metal Arms, 4*HSS Alligator Clips, 4*Rubber Feet and 1*Magnetic Soldering Iron Holder. WEIJIANG Complete Function Kit is easy and safe for Helping Hands Soldering.Satisfaction guaranteed and lifetime replacement warranty.Any questions,please don't hesitate to contact us,We will get back to you within 24 hours and provide you a satisfied solutions.

User questions & answers

Question: Do the clips stay tight ? Have to tighen them down multiple times
Answer: I found it advantageous having a soldering iron that has a control for the heat when I work on circuit boards. A stand alone unit with no controls can get too hot and transfer heat to other parts of a circuit board and ruin the work. I also like the holder with the base to keep the soldering iron off of the work station surface. The damp sponge in it's holder is useful for a quick clean up of the tip when too much solder accumulates. Having extra tips allows me to choose a tip small enough to keep the heat right were it is needed.
Question: Can I easily screw off arms if desired
Answer: There is no temperature control. It just has a power control, with no feedback. So the temperature will change wildly, getting hot when in the holder, and cooling off a lot when soldering. Get something with a digital readout, it is the only way to be sure it has feedback controlled temperature.
Question: Does the alligator clamp rotate
Answer: The clips portion is not hollowed out
Question: Where can can I get extra arms
Answer: It is around 2.75 inches.

Soldering Station, 110V 80W Digital Soldering Iron Kit with Smart Temperature Control (176°F-896°F), Auto Standby Sleep Solder Station for School Lab, Hobby, Electronics (80W Black)

TFLY

Based on 194 reviews Check latest price

Product description

Features

. This product designed with LED display.

. MCU controlled temperature calibration with PID system equipped, adjust temperature by knob button, easy to operate.

. The heating wire and sensor are made of PTC material, which is quick in temperature rise and precise in temperature control.

. Auto-standby, auto-shut down is available.

. Using 3 cored power cable.



Specifications:

Power: 80W

Temperature range:176℉-896℉/80°C ~ 480°C

Voltage: 110/120 Volt, AC (No 220V Available)

Temperature Stability: ¹2°C (Static)

Anti-Statically Designed & ESD FCC Safe



The Complete Kit Includes:

1 - 80 Watt Soldering Iron Station

5 - Extra Sizes/Styles of Soldering Tips

1 - Solder Roll Holder on the Side of the Unit

1 - Brass Sponge Tip Cleaner

1-50g 0.8mm Lead Free Solder Wire



Temperature Locking Function

Press LOCK/°C/℉ button for 3 seconds at the same time under working mode, the current temperature will be locked, the temperature won't be changed by turning the knob button, and display LOC for locking temperature. Can unlock the current temperature by pressing LOCK/°C/℉ button for 3 seconds again when temperature locking.



Auto Standby Function

When the soldering not in use and put the soldering iron on the iron holder, it will auto standby after 10 minutes, The heater is heating up to 392℉, nixie tube display STB , pick up the soldering iron and back to normal working mode.



Auto Sleep Function

In auto standby mode, the soldering station will auto sleep after 20 minutes, nixie tubedisplay SLP , the heaing core is not heated , it will get back to normal work mode by adjusting the knob or pressing the button.



Warning

E02 shown on the display screen means there is error for sensor.

  • 80W SOLDERING IRON STATION: PID Temperature Control, this soldering station can get perfect fast heating and constant temperature.Temperature adjustable from176℉-896℉/80°C ~ 480°C, This means the product has a wider temperature setting range than comparable devices. The temperature is shown directly on the LED digital display
  • THE TEMPERATURE LOCK FUNCTION: The temperature lock function ensures that you achieve constant heat and prevents the temperature from accidentally changing during soldering. In the event of a malfunction / too low / high temperature, the automatic error code E02 appears on the illuminated display
  • ESD & FCC SAFE CERTIFIED: As a professional manufacturer of hardware instruments, we know the importance of safety. Fuse to prevent leakage, high temperature resistant silicone wire, power-off protection switch, lead-free and non-toxic soldering iron nozzle Each safety design and protection parts are adopted to give you an extra layer of safety protection
  • AUTO STANDBY / SLEEP FUNCTION: After 10 minutes without active use, the soldering station is automatically switched to auto standby mode, heater is heating up to 392℉, nixie tube display STB. In auto standby mode, the soldering station will auto sleep after 20 minutes. nixie tube display SLP, the heaing core is not heated , it will get back to normal work mode by adjusting the knob or pressing the button
  • WIDE USE & IDEAL GIFT: With the approximately 1m long power supply and 1m cable between the station and the soldering iron, you can work without hindrance. The 80W soldering station is suitable for hobby electronics, schools, workshops and laboratories. Of course, it is also an ideal gift

User questions & answers

Question: What is the temperature correction setting
Answer: The unit has a standard US three prong plug (120VAC 60Hz). The product literature states that the unit has been designed for Electrostatic Protection. ESD safety depends not only on the soldering station but also on the working environment. Be sure to use grounding straps, an ESD mat, and the ground connection provided by the electrical power cord.
Question: Where can I get more tips
Answer: Recently purchased this and it did not come with the Euro power plug.
Question: what iron is it compatable with
Answer: I do small piece foil lamps and use an 80w SP-Weller for tacking, bridging and rough filing. I use a Weller SP-175W iron for filling, "boil out," finishing and installation of rings, structural wire within the field and bottom rims. This iron is designed for electronics not for stained glass work where the main object is to melt large quantities of 50-50 (I use) fast enough that the molten metal can be "poured" into the joints. This iron couldn't possibly keep up with the heat demand of melting 2-3 pounds at a sitting. I occasionally have to stop with my Weller SP-175 to allow the tip to absorb sufficient heat for boiling out. For came work; 80W Weller iron. It wouldn't be a good idea to switch between electronic and foil work as I use tinner's fluid (basically muriatic acid) for tacking and rough filling; then switch to zinc chloride for finishing. You will seriously damage electronics with an iron used with acids.
Question: Are replacement tips readily available? Are larger chisel tips available
Answer: BY = Blue Yellow - - the colors used for the plastic parts23 = type of retail package the unit is packed in - sleeve, box, bag, etc etc

Fancii LED Light Helping Hands Magnifier Station - 2X 4X USB Lighted Hands Free Magnifying Glass Stand with Clamp and Alligator Clips - For Soldering, Assembly, Repair, Modeling, Hobby and Crafts

Based on 2 reviews Check latest price

Product description

Versatile Helping Hand Magnifier

Made with a rimless acrylic lens; designed for hobbyists and professionals such as welders, electricians, and technicians.



Designed For Your Home or Workshop

This 2X helping hand magnifier is ideal for soldering, building models, electronic repair, DIY projects, jewelry, hobbies and crafts. While the 4X auxiliary spot lens adds extra zoom when you need to see more intricate details.



Fully Adjustable Workstation

There are two adjustable points on the neck of the unit, allowing the magnifying lens to be positioned at various angles and heights. Items are hold securely by the clamp and 2 alligator clips on a 4 way swivel, and the section holding the clips can be adjusted in height as well. The lens can also be rotated 360 degrees.



Made To Last

Constructed out of scratch resistant acrylic lens, metal, and ABS, our multifunctional helping hand magnifier is both sturdy and durable.



Illuminate While You Magnify

Equipped with 2 super bright LED lights to provide an evenly lit viewing area even under low-light conditions. The lights run on 3 AAA batteries or a USB source such as a power bank or wall plugin.



Specifications

3.5" (90mm) Primary Lens: 2X zoom

2X lens focal length: 8"

0.9" (23mm) Spot lens: 4X zoom

4X lens focal length: 2"

Adjustable neck

4-way swivel alligator clips

One detachable mini clamp

One iron holder

One metal tray

Two bright LED lights

Required three AAA batteries (NOT included)

Can also be powered by a USB source



✔ Backed by a 100% No-Hassle, RISK FREE Money Back Guarantee! If you are not completely satisfied with our magnifying glass, we will give you a full refund. No questions asked.





Click the Add to Cart Button at the Top of this Page to start improving your vision today!

  • 3.5 inch 2X Illuminated Helping Hand Magnifying Glass Station with 4X Auxiliary Lens
  • 360° rotating neck and bendable arms allows you to adjust the lens to the position where you need it the most
  • LED Lighted with 2 super bright LED lights | Powered by USB cable (included) or 3 AAA batteries
  • 2 fully adjustable helping hands with clamp and alligator clips, iron holder, and tray (Patent Pending)
  • Perfect workstation for soldering, building models, electronics repair, DIY projects, hobby and crafts

User questions & answers

Question: The thumbscrew doesn't hold the clamp rod in place. Why
Answer: Hello, This is rosin, not solder paste. Rosin: Solid pine resin, the raw material for making flux. Solder Paste: Viscous paste, It is an upgraded substitute for flux and soldering process with high automation and high welding precision. You can stick a soldering iron in it to melt it, or use a hot-air pencil to melt it a little, just enough to allow a drop to drip off the block of rosin onto the work area. Best wishes, LDK Service Team
Question: Can the soldering station be switched to the other side for lefties
Answer: How would I know? It melts soldier like it is suppose to.
Question: the bar that holds the alligator clips does not anchor at any position so it makes the product incapable and useless what am I doing wrong
Answer: China
Question: I am looking for something like this but I am going to be using a torch for soldering silver jewelry. will this hold up to an open flame
Answer: This device I believe is designed to hold printed circuit boards and/or wiring assemblies for soldering. The arms are fairly stiff and hold their position when adjusted, but the alligator clips don’t open very wide so it will be difficult using this to grip and support large items or assemblies. I wii

Latest Reviews

View all