Product description

A standard on stages throughout the world for years, the Shure SM58 Dynamic Vocal Microphone offers a carefully tailored frequency rise at about 4,000 Hz for smooth as silk vocals that stand out in the mix. Long associated with its unmistakable sound and unsurpassed reliability, the Shure SM58 Dynamic Vocal Microphone is widely considered the most popular mic in the world. Designed for professional vocal use in sound reinforcement and studio recording, the Shure SM58 Dynamic Vocal Microphone utilizes a highly effective, built-in, spherical filter that minimizes wind and breath pop noise while the cardioid pickup pattern isolates the main sound source and minimizes unwanted background noise. The tailored vocal response on the SM58 is a legendary tone that has become a world standard. Shure SM58 Dynamic Vocal Microphone Features: Smooth, mid-frequency presence rise for world-famous SM58 Mic sound, Uniform cardioid pickup pattern isolates the main sound source, Minimizes background noise, Pneumatic shock-mount system cuts down handling noise, Rugged construction for extreme reliability in demanding applications, Effective, built-in spherical wind and pop filter, 50 to 15,000 Hz frequency response, Supplied with break-resistant stand adapter which rotates 180 degrees, Legendary Shure quality, ruggedness, and reliability, Includes a mic stand adapter and a zippered storage pouch, Proximity Effect: When the sound source is less than 1/4 inch from the microphone, the microphone boosts bass frequencies (by 6 to 10 dB at 100 Hz), creating a warmer and richer bass sound than when farther away. This effect, known as proximity effect, happens only in unidirectional dynamic microphones like the Shure SM58 Vocal Mic. The low-frequency roll-off on the SM58 provides greater control, allowing the user to take full advantage of proximity effect.

From the Manufacturer

Shure SM58-LC Cardioid Dynamic Vocal Microphone,Black

• Frequency response tailored for vocals, with brightened midrange and bass rolloff to control proximity effect
• Effective built-in spherical wind and pop filter. Frequency response: 50 to 15,000 Hz
• Pneumatic shock-mount system cuts down handling noise.
• Uniform cardioid pickup pattern isolates the main sound source and minimizes background noise

User questions & answers

Question:	I apologize for my ignorance. Need for my church. Does this run on battery alone or does it have to be hooked up to something to work
Answer:	I have the AT2020USB+ version of this mic, it's USB and it has a blue light.I am buying this XLR version to run through my USB interface like my guitar does, so the sound is only coming from one device.
Question:	How long is the cable that I can get with this mic
Answer:	Hi,Yes, it has the three-prong XLR connector. I
Question:	What amplifier or mixer [ $20- $50 ] should i buy which is compatible with sm58 ? need suggestion
Answer:	If you use a conversion box, yes. This specific model uses an XLR interface because it requires phantom power (three prong, cylindrical shape). You can spend about $100 on a usb conversion box and use this model. I Use an AKAI professional ($250+) which can handle up to 4 mics and 4 outputs ALONG WITH the usb cable. All that said, you can bypass the whole thing and buy an "AT2020 USB". It hooks directly up to the laptop and there's no other equipment to buy. Warning: If you use an AT2020 USB, it will eat up your battery life, you NEED to have your machine plugged in to use it for a long duration. Reason is: the mic takes about 40 volts of power and audio recording and engineering is a processor intensive task (more CPU work = more power being consumed), it also takes a lot of memory so your HDD will be running non stop.If you're using this for fun, get the USB and save the money. If you're looking to get into more serious work, use the XLR as it's compatible with more high end equipment.
Question:	Feel free to laugh a bit and excuse my ignorance. I am starting voice lessons does this microphone only work with a computer? Or can I hook it up to something different? Ok no more laughing. Thank You
Answer:	No, it does NOT come with an XLR cable or a stand.

Product features

Shure SM58

If you’ve ever heard someone sing or speak into a live microphone, there’s an excellent chance it was an SM58. Rock stars. Pop idols. Comedians. Presidents. Popes. Immortal words have passed through its iconic grille for generations. And with engineering and durability that set the world standard, it’s sure to keep turning up at legendary performances.

Polar Pattern (Example 1)

Polar Pattern (Example 2)

Frequency Response

Product description

• Cardioid pickup pattern rejects off-axis sound and provides superior gain before feedback
• Frequency response tailored for vocals, with brightened midrange and bass rolloff to control proximity effect
• Shock-mounted cartridge for exceptional ruggedness and reduced handling noise
• Built-in "pop" filter that reduces explosive breath sounds and wind noise
• Supplied stand adapter and carrying/storage bag

User questions & answers

Question:	I'm trying to decide between this mike, the SM48 and the PG 58. I would like the best mike for a band, short of the SM
Answer:	I assume it's for a vocal mike? I do not know about the PG 58, but I can tell you the SM48 is flawless. Absolutely no problems so far. Shures are tanks when it comes to mics. I'd still go with the SM58 if you can get your hands on one cheap. I have never heard of a problem with them. I have seen vocalist throw them to the ground and they still work the same. Hope that helps.
Question:	Help! Which speaker can connect to this mike
Answer:	You can plug a Shure SM48 or Shure SM58 to hundreds of speakers, which is why they're the world's most popular, universal microphone (every performing musician I've known and every band carries a reliable and indestructible SM58 mic). It works with "performer's" speakers, which have a built-in amp and pre-amp. Examples are Peavey, Bose, JBL, Electrovoice, etc. I happen to use Roland piano speakers and Roland Cube speakers, but any P.A. system is likely to have the conventional XLR speaker's connection as well as the ¼ inch connection should you have a plug at the end of your cable (the SM58 will take either cable). The problem comes into play if you're limited to an indoor stereo system with "hi-fi speakers," which are not self-powered like musicians-performer's speakers. This is a performer's mic, the one you'll see in use for P.A. speakers in large rooms and big outdoor areas-- and musician's amp-speakers (for all those electric pianos). But it requires an XLR or quarter-inch phone plug connection. If you wish to use it as a USB speaker with your computer, Amazon is showing it with the the Shure X2U adapter ($100), which will convert an XLR cable into a USB cable and provide conveniences like a headphones jack (for no-latency monitoring) and control of volume as well as 48V Phantom Power (which is not needed with the SM48/58, since both are dynamic mics, not condenser mics). If yours is a non-USB condenser mic (eg. ATT2020), the Shure adapter could take the place of a mixing board-interface, saving money and space while giving you all the flexibility you need with a single mic used like a USB accessory to connect to a computer. Blue makes the same for half the price (the Icycle?), but with fewer onboard controls and questionable durability (my Blue mics, incl. the Yeti, are the first to break or wear out). Also, check Planet Waves for some of the plainest, cheapest (less than $10) adapters.
Question:	What type of connector does it use
Answer:	The output on the mike is xlr style but if that's a probly you can buy an xlr to 1/4 converter for a few bucks
Question:	what 10watt will work well with sm48s
Answer:	sauteed Broccoli de rabe with a side of minced meat couscous

Product description

PylePro Model : PDMICR42SLClassic Retro Vintage Microphone, SilverClassic Retro Dynamic Vocal Microphone, Vintage Style Vocal Mic with 16' ft. XLR Cable (Silver) Features: Classic & Iconic 'Old School' StyleBuilt-in Acoustic Pop FilterUltra-Wide Frequency ResponseHigh Signal Output for Voice ClarityInternal Cartridge Shock MountSelf-Tensioning Swivel MountRugged Construction & Steel Mesh GrillIntegrated Low Noise CircuitryON/OFF Switch for Stage ControlIncludes 16' ft. XLR CableUniversal Compatibility: Built-in Mic Stand AdapterPerfect for Stage Performances, Karaoke, RecordingTechnical Specs: Mic Element/Type: DynamicPickup/Polar Pattern: Uni-directionalMic Housing Construction Material: Molded ABSFrequency Response: 30Hz-15kHzSensitivity: -50dB (3dB @ 1kHz) Output Impedance: 600 Ohm (15%)Construction Material: PlasticDimension: 2. 2'' x 3. 1'' x 7. 4''Achieve quality sound performance and style with Pyle’s Classic Retro Microphones. The PDMICR42 vintage series dynamic mics will provide you with that old-school flavor along with today’s latest audio reproduction technology. Apart from the iconic stage and studio-tested design, these classic mics feature dynamic moving coil elements, adjustable self-tensioning swivel mounts, cardiod polar patterns, impressive frequency response rates and more -- all to create an overall fantastic look and feel. The Pyle PDMICR42 Series Classic Retro and Vintage Microphones are sure to give you that sound and style you’ve been looking for.

• RETRO STYLE: Pyle Pro introduces a classic iconic retro style performance microphone and will surely add old fashioned elegance to on stage gig or in studio performances. Allows you to enjoy tomorrow’s sound performance w/ a classic and iconic touch
• BUILT IN POP FILTER: The professional classic dynamic vocal mica has a built in pop shield / screen that eliminate or reduce the popping sound caused by the mechanical impact of fast moving air giving you a more clear audio. Includes 16' ft. XLR cable
• VOICE CLARITY: The silver vintage microphone features a high signal output, integrated low noise circuitry, 30Hz-15kHz ultra wide frequency response, -50dB (3dB @ 1kHz) sensitivity, and 600 ohm output impedance to ensure a crystal clear audio
• UNIDIRECTIONAL: This unidirectional mica also features a cardioid heart shape pickup pattern that is most sensitive in the front and rejects sound from other direction making it perfect for live stage performances, karaoke, in studio recording
• ADJUSTABLE ANGLE: The built in universal mica stand adapter is compatible with almost all of today's mica stand in the market. It also has an internal cartridge shock and self tension swivel mount so you can fully adjust your mica forward or back

User questions & answers

Question:	can it be handheld
Answer:	Yes it can. The only bad thing about this mic is it is made of plastic. But over all it sounds great.
Question:	IS this made of cheap plastic that will strip easily
Answer:	We actually used ours for a music video but the quality of the microphone was great! I didn't see it as cheap at all, and not plastic!
Question:	What stand should i use or does it come with one
Answer:	It doesn't come with a stand, but you can use a regular stand
Question:	Can we plug the mic to a computer
Answer:	Yeah my brother has this paired with the focusrite solo, Which has a usb connector you put into your pc. You plug your xlr into it and con monitor it directly with gain, and it's good if you plan on upgrading from this mic in the future.

Product features

Classic Retro Dynamic Vocal Microphone

Achieve quality sound performance and style with Pyle's Classic Retro Microphones. The PDMICR42R vintage series dynamic mics will provide you with that old-school flavor along with today's latest audio reproduction technology. Apart from the iconic stage and studio-tested design, these classic mics feature dynamic moving coil elements, adjustable self-tensioning swivel mounts, cardioid polar patterns, impressive frequency response rates and more - all to create an overall fantastic look and feel.

The Pyle PDMICR42R Series Classic Retro and Vintage Microphones are sure to give you that sound and style you've been looking for.

Technical Specifications:

Red: Mic Element/Type: Dynamic-Pickup/Polar Pattern: Uni-directional Mic Housing Construction Material: Molded ABS Frequency Response: 30Hz-15kHz Sensitivity: 50dB (±3dB @ 1kHz) Output Impedance: 600 Ohm (±15%) Construction Material: Plastic Dimension: 2.2'' x 3.1'' x 7.4'' Sold as: Unit Weight: 1.38 lbs.

Technical Specifications:

Silver: Mic Element/Type: Dynamic-Pickup/Polar Pattern: Uni-directional Mic Housing Construction Material: Molded ABS Frequency Response: 30Hz-15kHz Sensitivity: 50dB (±3dB @ 1kHz) Output Impedance: 600 Ohm (±15%) Construction Material: Plastic Dimension: 2.2'' x 3.1'' x 7.4'' Sold as: Unit Weight: 1.39 lbs.

Technical Specifications:

Black: Mic Element/Type: Dynamic-Pickup/Polar Pattern: Uni-directional Mic Housing Construction Material: Molded ABS Frequency Response: 30Hz-15kHz Sensitivity: 50dB (±3dB @ 1kHz) Output Impedance: 600 Ohm (±15%) Construction Material: Plastic Dimension: 2.2'' x 3.1'' x 7.4'' Sold as: Unit Weight: 1.4 lbs.

Product description

The Shure BETA 58A is a high-output supercardioid dynamic vocal microphone designed for professional sound reinforcement and project studio recording. It has become a leading choice among vocalists and touring professionals worldwide. The BETA 58A maintains a true supercardioid pattern throughout its frequency range. The BETA 58A has a shaped frequency response that is ideal for close-up vocals. The superb performance of this microphone is not affected by rough handling because of its rugged construction, proven shock mount system, and hardened steel mesh grille.

Designed for professional sound reinforcement and project studio recording Shure Beta 58A high-output supercardioid dynamic vocal microphone is a great choice for vocalists and touring professionals. Maintaining a true supercardioid pattern throughout its frequency range, the Beta 58A insures high gain before feedback, maximum isolation from other sound sources, and minimum off-axis tone coloration. It has a shaped frequency response that is ideal for close-up vocals. And its rugged construction, proven shock mount system, and hardened steel mesh grille make it great for use on the stage.

The Shure Beta 58A vocal microphone.

Frequency response.

Polar pattern.

Key Features

• Frequency response tailored for vocals, with brightened midrange and bass rolloff to control proximity effect
• Uniform supercardioid pattern for high gain before feedback and superior rejection of off-axis sound
• Neodymium magnet for high signal-to-noise output
• Hardened steel mesh grille that resists wear and abuse
• Advanced pneumatic shock mount system that minimizes transmission of mechanical noise and vibration
• Minimally effected by varying load impedance

Specifications

• Polar Pattern: Supercardioid, rotationally symmetrical about microphone axis, uniform with frequency.
• Output Level (at 1,000 Hz): Open Circuit Voltage: -51.5 dBV/Pa* (2.6 mV) *1 Pa = 94 dB SPL
• Impedance: Rated impedance is 150 ohms (290 ohms actual) for connection to microphone inputs rated low Z Phasing. Positive pressure on diaphragm produces positive voltage on pin 2 with respect to pin 3.
• Case: Silver blue enamel-painted die cast metal with hardened, matte-finished, spherical steel mesh grille.
• Adjustable, Stand Adapter: Slip-in microphone mounting, unbreakable, adjustable through 180 degrees with standard 5/8"-27 thread, black finish.
• Weight: 9.92 ounces

• Frequency response tailored for vocals, with brightened midrange and bass roll off to control proximity effect
• Uniform supercardioid pattern for high gain before feedback and superior rejection of off–axis sound
• Neodymium magnet for high signal–to–noise output
• Hardened steel mesh grille that resists wear and abuse
• Advanced pneumatic shock mount system that minimizes transmission of mechanical noise and vibration
• Minimally effected by varying load impedance
• Legendary Shure quality and reliability

User questions & answers

Question:	Is this microphone wireless
Answer:	This one is not wireless You need to purchase a mic cable too It is not included They make a wireless version but this is not it
Question:	Can anyone give a realistic assessment of how much better it is at resisting feedback than other mics? If not, any recommendations for one that does
Answer:	I haven't found it to be any better or worse at resisting feedback. The SM58 Beta is better than the SM58 in a few areas, but I haven't noticed it being better in this specific regard.
Question:	Does this mic need phantom power of 48V
Answer:	Hello, This microphone does not require phantom power, as it is dynamic.Phantom power is required for condenser microphones, such as Shure Beta 87A.
Question:	Is this a real Beta 58 or is it the ripoff from China
Answer:	Good question. I can only tell you that the one I received is real. The mesh grill on the AUTHENTIC SHURE mic almost looks "spider web" like. The links are intertwined - the FAKE SHURE has a regular metal screen. The AUTHENTIC SHURE mic has a DEEP BLUE colored ring (not DARK BLUE!) around the grill. The FAKE one has like a "SKY BLUE" Also, at the BOTTOM of the mic, where the XLR pins are, the REAL SHURE mic will have the pins numbered "1, 2 and 3" and ALSO have the SHURE LOGO embossed on the base by the pins. The FAKE MICS will NOT. Hope this info HELPS.

Product features

Shure BETA58A

Big sound. Full sound. Sophisticated sound. Is your mic living up to the power of your vocal? For decades, the BETA 58A has been through the ringer, pushing voice to the forefront on the biggest stages in the world. For sound that commands the attention of the entire crowd, this is your microphone.

Front

Capsule

Tabletop (Away)

Tabletop (Close)

Polar Pattern (Example 1)

Polar Pattern (Example 2)

Frequency Response

• High sound quality - Cardioid pickup pattern captures the main source while minimizing background noise. Large diaphragm can achieve clear high gain and rich bass with no feedback. Perfect for Live vocal, Karaoke, Speech, singing.
• Durable design. All metal construction ensure long life. Sturdy zinc alloy metal body and metal mesh windscreen with shock mount system can effectively reduces the handing noises.
• Supplied with a professional removable 3-pin XLR female to 1/4" cable. Work with speakers, amplifiers that with 1/4" interface to output the sound. The total length is 19ft, which is ideal for on-stage vocal performances. Superior construction of the microphone cable can isolate external electromagnetic interference and make the sound transmission more clearly.
• The on/off switch is for easy control of microphone on stage.(Push up is on, push down is off) When you don't use it, you just need to turn it off without unplug the cable.
• Dynamic microphone smooth frequency response is excellent for vocal and singing. Built-in Pop Filter can minimize the wind and breath noises.

User questions & answers

Question:	Is there a battery status indicator on the receiver
Answer:	Sorry, it's not the wireless model. So it doesn't have a receiver. And because it doesn't need power supply, so there's no battery status.
Question:	Can this be plugged into a mixer, does it have great sound, or is it muffled
Answer:	As long as your mixer has 1/4” mic jack, then it will works. This dynamic mic are cardioid pick-up pattern, it can capture the main source properly and minimize the background noise. And you can get the unbiased suggestion from the YouTube videos.
Question:	How does this mic compare to an SM
Answer:	I think it's not so practical to compare it with the SM58. The type is similar but there is huge gap in the price range. And we are sorry that there is no direct comparison between K8 and SM58. But you can still check out some videos on YouTube to see how it work out for vocal and interview. You can search "FiFine K8 Microphone Review" and "Budget Friendly Handheld Mics | Fifine K025 Wireless Microphone Review Fifine K8 Review".
Question:	What are the differences between the K669 and the K670, except the design upgrade
Answer:	K670 has the headphone monitroing jack. And the main difference is the mic capsule. The size of K670 is around 16mm, much bigger than the K669. The sound source in front of K670 will appear bigger, more engaging.

Product description

AKG D5 Dynamic Microphone

The AKG D5 is a powerful dynamic microphone for lead and backing vocals, as well as musical instruments. It delivers crisp sounds that cut through even the noisiest stage. D5 features a supercadioid polar pattern and dual shockmount that suppresses high feedback and any kind of handling noise. AKG uses the patented laminated Varimotion diaphragm on the D5. The microphone delivers pristine sounds even without extra tuning resonators. It works well for miking live vocals, pianos, horns, strings and woodwinds instruments.



TECHNICAL SPECS:

Type: Dynamic

Polar Pattern: Supercardioid

Output Impedance: 600 Ohm

Frequency Response: 70Hz-20kHz

Max. SPL: 147/156dB SPL (for 1% / 3% THD)

Self Noise: 18dB

Sensitivity: 2.6mV/Pa

Connector: XLR

Dimensions: 2.05" Diameter, 7.28" Length

Weight: 320g

Accessories: SA61 Stand Adapter, Mic Bag



Also Comes With:



Blucoil 10-FT Balanced XLR Cable

The 10-foot Blucoil cable interconnects your microphone to an audio interface, mixer, or preamp. It is made with premium Male-to-Female Neutrik-equivalent Zinc Alloy connectors that are protected with a high-density PVC jacket. The 92% shielding protects your audio signal from EMI and RFI. The OFC wire ensures that the best possible conductivity is provided. The Blucoil Balanced XLR Cable also avoids unwanted lost signals or degeneration.



Blucoil Pop Filter Windscreen

The premium Blucoil Microphone Pop Filter Windscreen features a 2-layer mesh with a 6-inch diameter. It blocks the air blasted from the user's mouth and disperses any remaining air pressure. Its unique design lessens the energy of plosive sounds caused by hard consonants such as 'p', 'b', and 'g'. So, by the time your recorder has captured your vocals, there are no hisses or popping sounds.



Get the D5 Bundle today and receive 5-Pack of Blucoil Reusable Velcro Cable Ties!

• CUTS THROUGH AN AUDIO MIX - The AKG D5 Dynamic Microphone uses AKG's patented laminated Varimotion diaphragm to produce crisp sounds that can cut through every mix.
• BLOCKS OFF AMBIENT NOISE - D5 utilizes a super-cardioid polar pattern to pick up sounds in front and at the rear of the mic capsule. It offers high feedback resistance and greater background noise rejection than a cardioid microphone.
• ENSURES NOISE-FREE PICKUP - The microphone's dual shockmount removes any kind of mechanical noise and delivers pristine sounds only.
• WORKS WELL WITH VOCALS AND INSTRUMENTS - D5 handles up to 147-156dB SPL. It perfectly captures your live performance. You can use this mic with guitars, strings, piano, horns, and woodwinds.
• INCLUDES - AKG D5 Supercardioid Dynamic Microphone. SA61 Stand Adapter. Mic Bag. Blucoil 10-Foot Balanced XLR Cable - Premium Series 3-Pin Cable for Microphones, Speakers, and Pro Devices (Male-to-Female). Blucoil Audio Microphone Pop Filter Double Layer Mask Shield for Studio Recording and Broadcasting with Stand Clip Stabilization Arm, Swivel Mount. Blucoil 5-Pack of Reusable Velcro Cable Ties.

Product description

PylePro Model : PDMICR68SL

Classic Retro Vintage Microphone, Silver

Classic Retro Dynamic Vocal Microphone, Vintage Style Vocal Mic with 16' ft. XLR Cable (Silver)

Features:

Classic & Iconic 'Old School' Style

Built-in Acoustic Pop Filter

Ultra-Wide Frequency Response

High Signal Output for Voice Clarity

Internal Cartridge Shock Mount

Self-Tensioning Swivel Mount

Rugged Construction & Steel Mesh Grill

Integrated Low Noise Circuitry

ON/OFF Switch for Stage Control

Includes 16' ft. XLR Cable & Travel Case

Universal Compatibility: Built-in Mic Stand Adapter

Perfect for Stage Performances, Karaoke, Recording

Technical Specs:

Mic Element/Type: Dynamic

Pickup/Polar Pattern: Uni-directional

Mic Housing Construction Material: Die-Cast Metal

Frequency Response: 80Hz-12kHz

Sensitivity: -75dB ±3dB (0Db=1V/Pa @ 1KHz)

Output Impedance: 600 Ohm (±30%)

Construction Material: Die-Cast Metal

Dimension: 2.2'' x 2.8'' x 7.4''

Achieve quality sound performance and style with Pyle’s Classic Retro Microphones. The PDMICR68 vintage series dynamic mics will provide you with that old-school flavor along with today’s latest audio reproduction technology. Apart from the iconic stage and studio-tested design, these classic mics feature dynamic moving coil elements, adjustable self-tensioning swivel mounts, cardioid polar patterns, impressive frequency response rates and more -- all to create an overall fantastic look and feel. The Pyle PDMICR68 Series Classic Retro and Vintage Microphones are sure to give you that sound and style you’ve been looking for.

• RETRO STYLE: Pyle Pro introduces a classic iconic retro style performance microphone and will surely add old fashioned elegance to on stage gig or in studio performances. Allows you to enjoy tomorrow’s sound performance w/ a classic and iconic touch
• BUILT IN POP FILTER: The professional classic dynamic vocal mic has a built in pop shield screen that eliminate or reduce the popping sound caused by the mechanical impact of fast moving air giving you a more clear audio. With 16' ft. XLR cable, case
• VOICE CLARITY: The silver metal vintage microphone features a high signal output, integrated low noise circuitry, 80Hz-12kHz ultra wide frequency response, -75dB (±3dB @ 1kHz) sensitivity, and 600 ohm output impedance to ensure a crystal clear audio
• UNIDIRECTIONAL: This unidirectional mic also features a cardioid heart shape pickup pattern that is most sensitive in the front and rejects sound from other direction making it perfect for live stage performances, karaoke, in studio recording
• ADJUSTABLE ANGLE: The built in universal mic stand adapter is compatible with almost all of today's mic stand in the market. It also has an internal cartridge shock and self tension swivel mount so you can fully adjust your mic forward or back

User questions & answers

Question:	is there any delay when monitoring ur voice while recording
Answer:	No different than any other microphone. It's just a basic dynamic mic in a nice retro design. That said, it's highly sensitive to plosives so I'm not sure how well it would do for recording. I use mine for live performance and I have to be careful of my p's and b's.
Question:	Does it come in red
Answer:	You can buy a can of red paint for like a dollar.
Question:	como contactar al vendedor
Answer:	si
Question:	Does it come with a stand? If not, what kind of stand should I look for
Answer:	No, this product does not come with a stand. To my knowledge, no professional mic comes with a stand. Regarding what type of stand to buy, While the attachment that holds the mic may be different, I believe that all mic stands are uniformly one size. This particular PYLE microphone screws on to the mic stand.

Product features

Pyle PDMICR68SL Classic Retro Vintage Style Dynamic Vocal Mic

Achieve quality sound performance and style with Pyle's Classic Retro Microphones. The PDMICR68 vintage series dynamic mics will provide you with that old-school flavor along with today's latest audio reproduction technology. Apart from the iconic stage and studio-tested design, these classic mics feature dynamic moving coil elements, adjustable self-tension swivel mounts, cardioid polar patterns, impressive frequency response rates and more - all to create an overall fantastic look and feel. The Pyle PDMICR68 Series Classic Retro and Vintage Microphones are sure to give you that sound and style you've been looking for.

Built in Acoustic Pop Filter

Ultra wide frequency response and studio and stage-tested design for quality and performance.

Classic and Old School Style

Enjoy tomorrow’s sound performance with the classic and iconic style with high signal output for Voice clarity.

Perfect for Stage Performances

The ideal choice for professional applications as well as garage bands, karaoke, and at home podcasts.

Universal Compatibility

Dynamic Moving Coil Element - Cardioid Polar Pattern - Self Tension Swivel Mount - Frequency Response: 50Hz-15kHz - On/Off Switch for Stage Control. Internal Cartridge Shock Mount. Rugged Construction and steel Mesh Grill.

Product description

MXL BCD-1 Dynamic Microphone

The MXL BCD-1 is an end-address dynamic microphone designed to be aimed in line to your mouth when speak. It perfectly captures the nuances of your voice thanks to its cardioid polar pattern. BCD-1 also ensures to reject sound pick up on the sides of the mic capsule. Its integrated suspension mount minimizes the pickup of vibration noise passed via a microphone stand.



TECHNICAL SPECS:

Mic Capsule: Dynamic

Polar Pattern: Cardioid

Sound Field: Mono

Frequency Response: 40Hz-15kHz

Impedance: 600 Ohm

Sensitivity: -54dB re 1V/Pa

Dimensions: 6.2 x 2.0"

Weight: 1.25 lb

Accessories: WS-002 Mic Windscreen



Also Comes With:



Blucoil Boom Arm Plus Pop Filter

The Blucoil Boom Arm Pop Filter is designed to free your hands from always holding your microphone during studio recordings, podcasts, or live performances. The 30" long mic boom arm accommodates all kinds of microphones and shock mounts (3/8" to 5/8" threading adapter and microphone clip are included). It is made of heavy-duty steel and zinc alloyed parts. You can adjust the boom mic 360-degrees. The foldable boom arm comes with a removable Blucoil Pop Filter. The 2-layer mesh blocks the air blasted from the user's mouth and disperses any remaining air pressure. It effectively reduces hisses and environmental noise caused by plosive sounds. NOTE: Install the boom arm vertically for it to hold up the weight of a 3.3lb microphone.



Blucoil 10-FT Balanced XLR Cable

The 10-foot Blucoil cable interconnects your microphone to an audio interface, mixer, or preamp. It is made with premium Male-to-Female Neutrik-equivalent Zinc Alloy connectors that are protected with a high-density PVC jacket. The 92% shielding protects your audio signal from EMI and RFI. The OFC wire ensures that the best possible conductivity is provided. The Blucoil Balanced XLR Cable also avoids unwanted lost signals or degeneration.

• DELIVERS WARM, RICH TONES - The MXL BCD-1 is a dynamic broadcast microphone that produces a bright sound ideal for voice-over productions and radio broadcasts.
• REJECTS AMBIENT NOISE FROM THE SIDES - The cardioid microphone is an end-address mic that captures your voice as you speak. It cancels out sound sources on the sides and back of the microphone.
• ENSURES MINIMAL VIBRATION NOISE - BCD-1 has tuned grill and built-in shock mount that eliminates internal reflections and reduces vibration noise passed via your mic stand.
• COMES WITH AN INTEGRATED SWIVEL MOUNT - The pre-attached mounting system allows you to position the microphone in any way.
• INCLUDES - MXL BCD-1 Dynamic Microphone with Integrated Mic Suspension Mount. MXL WS-002 Mic Windscreen. Blucoil All-in-One Microphone Boom Arm Plus Pop Filter. Blucoil 10-Foot Balanced XLR Cable - Premium Series 3-Pin Cable for Microphones, Speakers, and Pro Devices (Male-to-Female).

User questions & answers

Question:	Do you need cloudlifter for mxl-bcd
Answer:	It's a yes and no. Most of podcasters who use MXL BCD-1 don't use a Cloudlifter because their audio interface is more than enough. You may need one though if your audio mixer/interface has low-quality preamps. A crappy preamp can introduce a lot of noise into the audio signal.
Question:	Does this mic screw onto a tripod mic stand
Answer:	Yes, you can attach the MXL BCD-1 Microphone onto a tripod mic stand. Kindly get in touch with MXL at techsupport[at]mxlmics[dot]com or 800~800~6608 / +1~310~333~0606 for the list of compatible tripod stands.
Question:	Does the mic come with the protective case
Answer:	The MXL BCD-1 Dynamic Microphone comes with the MXL WS-002 Mic Windscreen only.
Question:	Will this hook up to zoom h
Answer:	The Zoom H6 has XLR inputs so yes the microphone cable will plug into it. The Zoom H6 also has a thread on its back that should allow a mic stand/arm to fit and hold it, perhaps with a thread adapter.

Product description

the microphone is build in a 25mm big diaphragm,it is a real condenser mic, so it must works with the 48V phantom power,it is made b metal,classic vintage outlooking design

• Capsule cartridge style:condenser
• Cartridge diaphragm size:25mm(big diaphragm ), the screw size attaching to the stand is 5/8
• This microphone must works with 48v phantom power please know that before buy
• The outside Circle diameter of the microphone round Hoop is 11.4cm=0.374ft please know that before buy
• Antique vintage style outlooking,all metal body,xlr output connector,and the mic is not the best mic for professional studio Record Production use

User questions & answers

Question:	What is the capsule in this
Answer:	Yes, I have been podcasting with this since I got it and it works beautifully.
Question:	What size screw does this accept for attaching to a stand? 3/8", 5/8", or
Answer:	I don't like the ECHO effects at all. My $100 Costco Karaoke has better ECHO effects. Is there another mixer with better ECHO or is it the speakers ?
Question:	is this uni or omni directional
Answer:	Lets correct a few things. NO dynamic mics need Phantom power. And yes the power will reach the dynamic mics and generally that is OK. Also condensers that don't have batteries NEED phantom power. B123 managed a post with some serious misinformation. It is best not to send phantom to a dynamic because if the phantom is unbalanced a bit (broken cable, dirty pins etc.) you move the diaphragm of the capsule. So I wouldn't worry about it because the chance of actually doing damage is very small. The info on Ribbon mics is important to remember because Phantom will damage classic ribbon mics. I believe some of the modern ones have built in protections, but I wouldn't take a chance unless a manufacturer actually says their mic is safe on phantom power.

Product description

The MXL CR77 is a dynamic stage microphone that melds vintage style with modern design elements both inside and out. Behind the grill, an integrated foam windscreen filters out plosives and background noise while the super cardioid polar pattern rejects periphery noise. The CR77 also features a built-in shock mount to reduce noise from floor vibrations, allowing the singer to come in close to the mic while performing. The CR77's construction is robust and heavy to withstand the rigors of the road. With its distinctive black chrome, perforated metal grill and matte black body, the MXL CR77 commands the stage. Key Features: Elevates stage presence with distinct character Internal windscreen and integrated shock mount Directional super cardioid pattern Rugged construction Sleek black and chrome body Features: Type: Dynamic Frequency Response: 50 Hz-14 kHz Polar pattern: Super Cardioid Sensitivity: -52 dB re 1 V/Pa Impedance: 400 ohms Size: 65mm x 180mm/2.56 in x 7.09 in Weight: 1.4 lbs./635g Metal Finish: Black and Black Chrome

• Brand:MXL
• Elevates stage presence with distinct character
• Internal windscreen and integrated shock mount
• Directional super cardioid pattern
• Rugged construction

User questions & answers

Question:	can conect this mirophone to me pc with xlr to 3.5mm adapter or need a mixer or interface
Answer:	You could, but it likely wouldn't sound great. If you're buying a microphone like this, you'd really want to have some sort of interface with a decent mic preamp built in. Something like the Focusrite Scarlett Solo, or the ART USB Mix Project Series Mixer would do the trick. You'd be much, much happier with the results if you went through something like that. Most built in 3.5mm connectors on computers are connected to very bad preamps and very bad converters that are usually noisy and sound pretty terrible.
Question:	If one put this mic on a desk stand, would it pick you up good sitting up without having to lean in to it? (think johnny carson or david letterman
Answer:	If you're looking at this mic thinking about podcasting or youtube this mic will work fine and its dynamic nature should help tame room noise. But, dynamic mics like to be used close to the source so you'd be better off with it on a boom so you can keep it close to your mouth. The mics on the desk of most talk show host are props. The host and guest are recorded by techs using mics on boom poles who can change the position when people move around. Watch how Joe Rogan, Howard Stern, ect., use their mics in studio to get an idea.
Question:	What is the weight of this mic
Answer:	It's very light, I had one for about a week before I sold it to the next poor fool. This mic sounds pretty terrible. You want a flashy stage mic, just spend that little bit more and get yourself one of the Shure 55 models.
Question:	Would this be good for twitch streaming for gaming? would be using it with a goxlr mini
Answer:	It would. However as a directional mike it might not produce as well as the typical headset mike. Assuming the player is moving a lot. We bought 2 for our radio station and use them for vocal performances. Sounds beautiful. Full & Rich and looks great!

Product features

MXL CR77

The MXL CR77 is a dynamic stage microphone that melds vintage style with modern design elements both inside and out. Behind the grill, an integrated foam windscreen filters out plosives and background noise while the super cardioid polar pattern rejects periphery noise. The CR77 also features a built-in shockmount to reduce noise from floor vibrations, allowing the singer to come in close to the mic while performing. The CR77's construction is robust and heavy to withstand the rigors of the road. With its distinctive black chrome, perforated metal grill and matte black body, the MXL CR77 commands the stage.

The super cardioid design means it is most sensitive to sound at the front and there is a small lobe of sensitivity at the back of the microphone. It is designed as a live stage microphone, but like most dynamics, it can also be used in the studio. The CR77 has a built-in shock mount, integrated windscreen, and a standard 3-pin male XLR connector.

MXL is a leading manufacturer of high performance audio products for professionals and recording enthusiasts around the world. MXL’s award-winning solutions continue to astound today’s top artists, engineers, professional producers, and businesses that require sonic perfection on stage, in the studio, and in the conference room.

Aluminum Flight Case

Microfiber Cleaning Cloth

Product description

The e835 is a High Quality vocal microphone. It has a cardioid pick-up pattern for excellent feedback rejection and uniform on and off axis response.

• Gentle presence boost to even tonal response ensures clarity and projection
• Minimal Proximity effect provides consistently clear bass end performance when singing closer to or further from capsule
• Cardioid pick-up pattern provides good signal isolation and feedback rejection, enabling higher sound levels to be obtained
• Metal construction and internal shock-mount system minimizes handling noise
• Frequency response 40-16,000 Hz, Impedence 350 Ohms

User questions & answers

Question:	Can we connect this to garage band-MacBook through usb
Answer:	No, this mic has a standard XLR connection -- meant to connect to your computer via a USB audio card or mixer.
Question:	I wonder if he has is original and has the stamp of originality
Answer:	An update to this question based on my experience with the Sennheiser E865 purchased here on Amazon: Mine had the original stamps and markings including the holographics, however Amazon marketplace is not an official distributor so Sennheiser will NOT honor warranty for products purchased through Amazon.
Question:	These guys work on toms
Answer:	If you are referring to tom tom drums then I don't see why not. They work really well for vocals both during performance and recording.
Question:	what would this mic plug into? special type of speaker
Answer:	This mic uses a standard XLR-type cable. Most (but not all) powered speakers use line-level inputs, not microphone-level. If your speakers happen to have an XLR mic input you're good to go! If not, you'll need a preamplifier such as a mixer with an XLR mic input. Many DJ mixers have a mic input, and any studio or live sound mixer will have mic inputs as well. If your speakers or mixer have a 1/4" mic input, sometimes called a high-Z input, you'll need a female XLR to unbalanced 1/4" male adapter.

Product features

Evolution 600/800 Series

Sennheiser’s uncompromising, rugged evolution e600 (instrument) and e800 (vocals) series includes a wide-range of dynamic and condenser microphones, each tailored to capture clear and detailed sound with low handling noise and high feedback rejection.

In live sound, there are no second chances 600/800 series delivers consistent, reliable results with microphones renowned for their clarity, projection and uniform on-axis / off-axis response.

Industry leading 10 year warranty!