10 best protective gloves for cutting
Protective gloves for cutting are essential personal protective equipment (PPE) designed to safeguard the hands and wrists from potential injuries while working with sharp objects or tools. These gloves are commonly used in various industries, including construction, manufacturing, automotive, woodworking, and food processing. Here are some key points about protective gloves for cutting:
Cut-Resistant Materials: These gloves are typically made from specialized cut-resistant materials such as Kevlar, Dyneema, or high-performance polyethylene fibers. These materials provide a strong defense against cuts, slashes, and punctures.
Levels of Protection: Protective gloves are often rated based on their level of cut resistance, which is categorized into different ANSI/ISEA (American National Standards Institute/International Safety Equipment Association) or EN (European) standards. The levels range from A1 to A9 (ANSI) or from A to F (EN), with higher ratings indicating greater cut resistance.
Glove Types: There are various types of cut-resistant gloves available, including:
Cut-Resistant Gloves: These gloves offer general protection against cuts and abrasions and are suitable for various applications.
Cut-Resistant Sleeves: These are long sleeves made from cut-resistant materials, designed to protect the forearm from cuts and abrasions.
Impact-Resistant Gloves: Some gloves combine cut resistance with impact protection, making them suitable for tasks involving both cutting and impact hazards.
Dexterity and Comfort: Modern cut-resistant gloves are designed to balance protection with dexterity and comfort. They allow wearers to handle sharp objects while maintaining a good grip and tactile sensitivity.
Applications: Protective gloves for cutting are used in a wide range of applications, including:
Construction: To protect against sharp tools and materials.
Manufacturing: In industries where handling of sharp machinery and materials is common.
Food Processing: To safeguard against knife injuries in food preparation.
Woodworking: For handling sharp woodworking tools.
Lab Safety: In laboratory settings to protect against accidental cuts when handling glassware and sharp objects.
Proper Fit: It is crucial to select gloves that fit properly to ensure maximum protection. Ill-fitting gloves may compromise safety.
Maintenance: Regular inspection and maintenance of cut-resistant gloves are important to ensure they remain effective.Gloves that show signs of wear, such as fraying or damage, should be replaced promptly.
Regulatory Compliance: Employers must provide appropriate PPE, including cut-resistant gloves, to their workers in compliance with occupational safety regulations.
Training: Proper training on the correct use and care of protective gloves is essential to ensure their effectiveness.
Selection: The choice of gloves should be based on the specific hazards present in the workplace. Different tasks may require different levels of cut protection.
In summary, protective gloves for cutting play a vital role in safeguarding the hands and wrists of workers in various industries. They are available in different materials and types, offering a range of cut resistance levels to suit specific needs. Proper selection, use, and maintenance of these gloves are essential for ensuring worker safety.
Below you can find our editor's choice of the best protective gloves for cutting on the market- Durability with the highest level of cut resistant material available on the market - 4 times stronger than leather.
- Superior grip with a snug fit for small and large hands - made for preparing food or working on jobs requiring precision. Both gloves are ambidextrous.
- Lightweight and comfortable protection without the bulk - awarded with the highest, EN388 level 5 cut resistance.
- Ideal for cutting, working with mandoline slicers, knives, cutters, graters and peelers in the kitchen, woodworking, carving, carpentry, oyster shucking, and so much more...
- 100% food safe and machine washable - keeping your gloves clean is easy.
User questions & answers
Question: | Are both gloves in the pair fitting the same hand, meaning are they both R-handed or L-handed, or R+L? Only one hand, whatever is dominant, matters |
Answer: | If you don't mind which side the tag is located, both gloves fit either hand. It's like buying a box of latex gloves for doctors. The material is stretchy enough that all gloves fit both hands, provided you select the right size. |
Question: | Are these ambidextrous |
Answer: | Yes, both gloves are ambidextrous. |
Question: | Would they work to protect from getting nicked or cute for a band saw |
Answer: | I doubt it will but can't say for sure. I've purchased mine for regular use on a kitchen mandolin and it provides great protection in this regard. However it may not be 100% resistant to cuts from a band saw and similar types machinery. I say this based on one person's review where they placed a carrot in one of the fingers of the glove and when they ran it down the mandolin, it cut right off. |
Question: | How do these hold up against ninja attacks |
Answer: | Funny that you ask. This product was originally patented by a Japanese housewife during the 16th century Sengoku period. While slicing mountain potatoes on her stone mandolin, her house was suddenly attacked by ninjas. She successfully defended herself from ALL sword attacks using only these gloves, common farmer karate and a handgun. If you ever visit Iga city, her hometown, they've erected a statue in honor of her bravery and lightning-fast knife skills. p.s. In the adjacent gift shop, you can find these gloves for $4 less than here. |
Product features
Keep Your Hands Safe With NoCry Cut Resistant Gloves
The NoCry cut resistant gloves let you handle all your knives - the giant one, the normal one you use for everything, the super tiny one and the one with the weird holes in the middle - confidently. Without injuring yourself.
Made of food safe, ultra-high molecular weight polyethylene, nylon, polyester, glass fibre and spandex (for comfort), these gloves have been designed to resist cuts and nicks from even the sharpest blades.
Our gloves also have an EN388 Level 5 protection rating - the highest resistance rating there is. Outside of wearing chain mail on your hands, these gloves are the simplest way to keep your fingers cut free.
Work faster and safer with gloves that fit like a second skin
What’s more of a hassle than working slowly because you’re afraid you’ll cut yourself? It’s trying to maneuver a blade with an ill fitting glove on your hand.
That’s why NoCry cut resistant gloves come in 4 sizes - Small, Medium, Large, Extra Large - to ensure a snug fit.
Compared to bare hands, the elastic material in your NoCry gloves makes keeping a firm grip on slippery and awkward items a snap. You’ll be able to complete tasks more quickly and accurately while avoiding nicks and cuts.
Get superior protection against sharp blades without sacrificing comfort
NoCry cut resistant gloves are ultra-thin, soft against the skin, and highly elastic. Weighing in at less than an ounce, they have none of the bulk found in other gloves on the market offering the same protection. 4x stronger than leather.
Prepare food or work on jobs requiring precision with complete dexterity. You’ll never feel like you’re wearing armor on your hands or auditioning for a part on Game of Thrones.
PS! While the NoCry gloves are cut resistant, they are not fully cut proof. We designed them to reduce the likelihood of sustaining serious injury if accidents happen. Please still remain careful while using your gloves.
Easy to wash
After use, machine-wash your gloves with a mild detergent. Keep the washing machine water temperature at or below 104°F/40°C. Do not iron or use machine drying - instead, hang the gloves to drip dry.
Good for jobs outside of the kitchen too
- Quilting with a rotary cutter
- Gardening
- Picking up broken glass
- Stripping copper wire
- Carving wood
- Any time you're working with sharp objects
Size chart
NoCry cut resistant gloves come in 4 different sizes for best fit. Measure your palm diameter and middle finger length (as shown in the image above) to determine your optimal glove size.
Product description
1.Your trustworthy kitchen assistant, protecting your hands from injury while cutting and slicing with Dowellife cut resistant gloves.
Your Dowellife cut resistant gloves could help you to handle grater, knives, and mandoline with high protection and good dexterity, without worrying about hands injury.
Made of food safe and highest cut resistant level material, the gloves are designed to provide EN388 level 5 cut protection for your hands from blades cutting.
2.Work faster and safer with gloves.
Multipurpose safety gloves in and out of kitchen, Dowellife cut resistant gloves are the best choice as oyster shucking gloves, meat cutting gloves and wood carving gloves.
The cut resistant gloves offer you firm grip on slippery and awkward items due to good elastic material and lightweight design.
You could grasp firmly not only the food and wood, but the mandoline slicer, oyster knife, wood carving knife.
You’ll be able to complete kitchen working and wood working more quickly, accurately and safely.
3.Superior protection against sharp blades with excellent comfort.
Compared with the chainmail gloves, the Dowellife gloves are designed for excellent comfort with ultra-thin, soft and highly elastic.
Weighing less than 2 ounces, perfect balance between protection and dexterity for kitchen and wood working.
4.Now click the "Add To Cart" button to order the cut resistant gloves to avoid 99% hand accidental injury for kitchen working, oyster shucking, meat cutting, butter mandoline, vegetables slicing, fruits peeling, wood carving and other wood working.
5.Packing List: 1*pair gloves 1*pcs safety notice and manual.
- Protect your hand from cuts and abrasions---The high performance cut resistant material HDPE is adopted and the gloves is awarded with the highest EN388 level 5 cut resistance certification. 10 times stronger than normal gloves.
- Excellent comfort and dexterity to wear and grip--- flexible operation, Not too hard, No sliding. The special high elastic nylon is blended to make the gloves fit your hand so well.
- Easy to sanitize and keep clean--- it is hand and machine washable and can be sanitized as kitchen dishwashing towel.
- More convenient to hang dry and replace--- One intimate designed hang ring is fixed on each gloves wrist.
- Now click the "Add To Cart" button to order to avoid 99% hand accidental injury for your family at kitchen cuts, oyster shucking, meat cutting, butter mandolin, vegetables slicing, fruits peeling, wood carving, carpentry and garden working.
User questions & answers
Question: | Could these be used as a safety glove while using a rotary cutter in quilting |
Answer: | These are my work gloves. Always in my car. I used them to pump gas and in store visits when covid-19 1st started. Still use the to open doors and elevator buttons in senior building. No covid-19 for me yet. Medically I do not know. |
Question: | Can I touch food with the gloves |
Answer: | My husband says that he would not consider them reliable for potential needle sticks. |
Question: | how to clean |
Answer: | These gloves are touch screen compatible; very thin with some work-touch sensitivity. I use mine to manipulate small cable TV fittings. I'd probably shop for heavier rubber gloves with an emphasis on slip and pinch resistance, insulated against cold perhaps, were I to handle shellfish as a job. Like a lobster boat? No, I can't recommend these particular gloves for that work. |
Question: | Can they be worn on either hand? Or Are they made specifically for left and right hand |
Answer: | Depends upon the fabric bias of the jury. |
- HIGHEST CUT PROOF CE EN 388 4544 - Protect hands from cuts and punctures while cutting meat and while handling sharp metal, knife, mandoline, blade, glass, plastic, construction materials
- BEST & COMFORTABLE - Ergonomic snug fit to all fingers. A second-skin feeling. LIGHTWEIGHT 13-gauge cool HPPE & Spandex performs with outstanding MANUAL DEXTERITY on various delicate professional works
- NON-SLIP EVEN WITH LIGHT OIL & UNDERWATER - Prevent pipe’s slippage and minimize hand fatigue. Convenient SMARTPHONE TOUCHSCREEN COMPATIBLE. Breathable WATER-BASED rubber coating for an all-day comfort. Passed US Food contact coating test
- PREMIUM & STYLISH - Easy on and easy off thanks to the high elastic knit wrist cuff. Silicone free. Excellent for mechanics, gardening, carpentry, kitchen, plumbing, filleting, fishing, oyster sucking, woodworking, metalworking, auto, HVAC, and carving. Suitable for boys and girls. Next level cut-proof gloves for med, women, chef, ladies, and children
- RELIABLE OUTSTANDING PERFORMANCE - CE Qualified and met ANSI Cut standards. We offer a 100% Satisfaction Guarantee or Money Back if you are not happy with our product
User questions & answers
Question: | Are these good for covid |
Answer: | Do you mean compared to other brands of KN95 masks or compared to all types of other masks? In general I believe that the KN95 is considered not as protective as N95 masks but better than surgical or cloth masks. As with all masks, they have to be worn correctly and replaced or sanitized appropriately between wearings. As an RN for 48 years I have worn many types of masks. These are more comfortable and more available than the N95 masks. I have purchased them for myself and my family to use during this pandemic. |
Question: | How well do these hold up to potential needle sticks |
Answer: | No, it is not a manufacture or expiration date. It is a code that indicates the quality of the mask, and is the standard for safety expected by hospital employees. |
Question: | are they good for picking up lobsters |
Answer: | Exactly. I’m not a scientist so there’s no way for me to know if they are actual KN 95’s but they are great masks And they are comfortable and thick. |
Question: | Will they acquit if the gloves don't fit |
Answer: | I don't think you can clean them. These are a paper material and not cloth. |
Product features
Level 5 Cut Resistant Gloves Cru553 - Grey
WE ARE COMMITTED TO PROVIDING THE MOST COMFORTABLE AND SAFER PERSONAL PROTECTIVE PRODUCTS BASED ON STATE-OF-THE-ART TECHNOLOGY. To implement dangerous works, Cru553 offers the protection from cuts, punctures and abrasions with comfort, grip and dexterity.
WORLD CLASS COATING TECHNOLOGY
- Durable nitrile coating on palm & fingertips
- Firm anti-slip to handle slippery materials
- Secure for food processing
- Keep drying and cool with unique air ventilation
- Long lasting extreme durability
GREAT PROTECTION & THE NEXT 3D SEAMLESS KNITTING
- CE EN 388: abrasion level 4, cut-resistant level 5, puncture resistance level 4
- ANSI cut-proof A4
- Second Skin Slim fit with Kevlar, Dyneema, fliament yarn and Spandex for best workability
- Soft touch
- No twist while working with screwdrivers for mechanic
IDEAL APPLICATION
- Handling sharp steel materials, knives, rotary cutter, chain mail, chain saw, iron, carpentry and ax
- Handling carpet cutter, mandoline, construction materials, stamping, grater and woodworking
- Spearfishing, food processing, filleting, meat cutting, climbing, gardening and packaging
SMART & RELIABILITY
- Convenient smart devices touch screen compatible
- Industrial-friendly color to hide dirty stain
- Emotional design with sustainable high quality
Product description
1.Your trustworthy kitchen assistant, protecting your hands from injury while cutting and slicing with Dowellife cut resistant gloves.
Your Dowellife cut resistant gloves could help you to handle grater, knives, and mandoline with high protection and good dexterity, without worrying about hands injury.
Made of food safe and highest cut resistant level material, the gloves are designed to provide EN388 level 5 cut protection for your hands from blades cutting.
2.Work faster and safer with gloves.
Multipurpose safety gloves in and out of kitchen, Dowellife cut resistant gloves are the best choice as oyster shucking gloves, meat cutting gloves and wood carving gloves.
The cut resistant gloves offer you firm grip on slippery and awkward items due to good elastic material and lightweight design.
You could grasp firmly not only the food and wood, but the mandoline slicer, oyster knife, wood carving knife.
You’ll be able to complete kitchen working and wood working more quickly, accurately and safely.
3.Superior protection against sharp blades with excellent comfort.
Compared with the chainmail gloves, the Dowellife gloves are designed for excellent comfort with ultra-thin, soft and highly elastic.
Weighing less than 2 ounces, perfect balance between protection and dexterity for kitchen and wood working.
4.Now click the "Add To Cart" button to order the cut resistant gloves to avoid 99% hand accidental injury for kitchen working, oyster shucking, meat cutting, butter mandoline, vegetables slicing, fruits peeling, wood carving and other wood working.
5.Packing List: 2*pair gloves 1*pcs safety notice and manual .
- Protect your hand from cuts and abrasions---The high performance cut resistant material HDPE is adopted and the gloves is awarded with the highest EN388 level 5 cut resistance certification. 10 times stronger than normal gloves.
- Excellent comfort and dexterity to wear and grip--- flexible operation, Not too hard, No sliding. The special high elastic nylon is blended to make the gloves fit your hand so well.
- Easy to sanitize and keep clean--- it is hand and machine washable and can be sanitized as kitchen dishwashing towel.
- More convenient to hang dry and replace--- One intimate designed hang ring is fixed on each gloves wrist.
- Now click the "Add To Cart" button to order to avoid 99% hand accidental injury for your family at kitchen cuts, oyster shucking, meat cutting, butter mandolin, vegetables slicing, fruits peeling, wood carving, carpentry and garden working.
User questions & answers
Question: | Could these be used as a safety glove while using a rotary cutter in quilting |
Answer: | I've never used one, but from looking at images I would say yes, with limited contact at least. They've held against short contact with razor blades and sharp pruning shears, although both instances were short, with me pulling away quickly after contact. I wasn't applying much pressure with the razor, and the shears hit with only one blade on the side of a finger. Neither caused any visible damage to me or the gloves. The shears cut about a 1/4" deep and 3/4" long into my palm the last time they caught me being careless (without gloves). |
Question: | Can I touch food with the gloves |
Answer: | Yes. The gloves are the food safety. You could touch food with our gloves. We suggest to use separate gloves for raw and cooked food. Cleaning and sanitizing the gloves whenever you used it. |
Question: | how to clean |
Answer: | I simply rinse mine in hot water, wring them out, and lay them out to dry flat. Never got them so dirty I had to do anything else. If yours need more extensive cleaning, I recommend you contact the manufacturer. |
Question: | Can they be worn on either hand? Or Are they made specifically for left and right hand |
Answer: | Dear, these gloves could be worn on either hand. There is no difference for left and right hand. |
- 【LEVEL 8 CUT RESISTANT】 ISEA- the US professional agency made an A8 judgment on our cut resistant factor, which means it can protect your hands from 99% injury.Combination of ultra high strength fibers and stainless steel provides exceptional protection against cuts and slashes.
- 【MORE BREATHABLE】 PRO-design of large holes makes the Schwer cut gloves more breathable and comfortable than others. Even after two hours of long use, your hands will NOT SLIP due to sweating.
- 【MULTI-FUNCTION】 Our cutting gloves are ideal tools for preparing food or working on projects involving knives, scissors, paper cutters or blades. Perfect for kitchen cuts, oyster shucking, meat cutting, butter mandolin, vegetables slicing, fruits peeling etc.
- 【AMBIDEXTROUS】Unique knitting technology and high-quality materials provide superior comfort, making you more flexible when preparing food or working. Ergonomic design fits all fingers, allowing moving fingers freely without interfering activities.
- 【MACHINE WASHABLE】 Our durable safety cutting gloves can be washed by hand or washing machine.PLEASE NOTE: Throwing them into a dryer may cause damage.
Product features
Your trustworthy kitchen assistant, protecting your hands from injury while cutting and slicing with Schwer Level 8 cut resistant gloves.
These cut resistant gloves are made from ultra high strength fibers and blend with stainless steel, they are safe to use with food and can drastically reduce the risk of accident when handling sharp blades. They're form-fitting and comfortable to wearing.
- Made from extremely cut resistant material
- Highly durable, light weight and machine washable
- Avoid accidental hand injuries by using these protective gloves
- Perfect for using in the kitchen, around the home, or at work
- 【LEVEL 9 CUT RESISTANT】 ISEA- the US professional agency made an A9 judgment on our cut resistant factor,which means that this new stainless steel glove has reached the highest cut resistant rating
- 【STRONGER PROTECTION】Made of high-strength polyethylene fibres and stainless steel wire, the cutting gloves is 16 TIMES stronger than general gloves.What’s more, it will NOT SHED METAL when you use brush to clean it, safer for food handling
- 【WIDE USE】Strong cut resistant materials let cut gloves come in direct contact with food items .You will bring cute fingers relax while cutting, slicing, shucking and peeling food in kitchen.It can also be used for garden, mechanic, fishing and construction work
- 【INCREDIBLY DURABLE】The denser tissue makes your work gloves won’t tear easily like before!You will be surprised to find that your work gloves are more comfortable and tough, it means that you can use them longer✅
- 【WHAT YOU GET】One piece stainless steel wire mesh glove for SINGLE hand, order now and have a free-of-charge nylon cotton glove to fit your hands better.What’s more, it is easy to clean with water and soap, even for washers
User questions & answers
Question: | How are these cleaned? Can they we washed |
Answer: | Yes, just wash in top rack of dishwasher. Easy!! |
Question: | I need one for my right hand |
Answer: | they sell them for both |
Question: | what's level 9 actuallly |
Answer: | The American National Standards Institute (ANSI) defined 9 levels of cut resistance that indicate how many grams of cutting load a glove can withstand from a sharp blade before being penetrated. A1: 200 - 499 grams A2: 500 - 999 grams A3: 1000 - 1499 grams A4: 1500 - 2199 grams A5: 2200 - 2999 grams A6: 3000 - 3999 grams A7: 4000 - 4999 grams A8: 5000 - 5999 grams A9: 6000+ grams |
Question: | Are these made in the USA |
Answer: | Nothing is made in the USA any more. You can help to change that by refusing to buy "made in China" product. Do it for your neighbor who is now out of work because of globalization. |
Product features
Why choose Schwer?
You may not know what does it mean if a manufacturer produces professional labor gloves for more than 10 years?
The answer is professionalism, focus and belief
Schwer concentrates on work gloves for 10 years and we are the gold supplier to thousands of wholesalers and consumers worldwide.
Core concept: leapfrogging bravely and pursuing excellence
Designer Jerry: Innovation to provide the next generation of protective gloves is the core of our survival
Strong cutting protection: After a long period of development, new anti-cutting wires and technologies have been added.
More durable than ever: an extra cut-resistant rope is added to the material, which greatly improves the wear resistance of the glove.
Quality Control: Schwer manages the production floor strictly and controls the production process and quality of the factory. Upon completion, each pair of gloves must undergo two rigorous quality checks, including cut resistance and firmness.
What does the level A9 of anti-cutting level mean?
The American National Standards Institute (ANSI) defined 9 levels of cut resistance that indicate how many grams of cutting load a glove can withstand from a sharp blade before being penetrated.
- A1: 200 - 499 grams A2: 500 - 999 grams
- A3: 1000 - 1499 grams A4: 1500 - 2199 grams
- A5: 2200 - 2999 grams A6: 3000 - 3999 grams
- A7: 4000 - 4999 grams A8: 5000 - 5999 grams
- A9: 6000+ grams
So Level A9 means that this new stainless steel glove can performe 20 cuts under a load of 6000g, all these cutting distannce were greater than 50mm.So it has reached the highest cut-proof rating.
- Family and Restaurant kitchen: fish and shellfish processing, poultry processing, vegetables cutting
- Supermarket and butchery work: Handling goods,meat processing, factory workshop and so on
- Industrial products processing: plastic processing, leather processing, wood processing, glass processing, paper processing, cloth processing
Why choose cut-resistant gloves?
There are so many injuries in our daily life and work, that i can cite a lot of examples. Slaughter, cut vegetables, shell, and handle oysters, our hands will suddenly be bitten by a knife in the kitchen! If you cut meat for a living, or you do some woodworking, construction, your hands protection are more inevitable!
Everyone knows that hands are important in our lives and work, so they are always exposed to danger. Maintaining the status quo and making oops all day can't help anything.That's where Schwer cut resistant gloves come in
What you get
- Single stainless steel glove*1,
- nylon gloves*1,
- Instruction manual*1
No need to wash by your hands
- Just wash your hands with the gloves on or you can put it into dishwasher to clean, you can fully enjoy rest time after busy work -no need to worry about interrupting your valuable free time
Fit right hand
- Our gloves are suitable for both left and right hands, so you don't have to worry about any one of your hands being left out.
Fit left hand
- Our gloves are suitable for both left and right hands, so you don't have to worry about any one of your hands being left out.
Product description
Why Choose Our Cut Resistant Gloves ?
We are professional Cut Resistant Gloves company. In the past 20 years, we are committed to gloves development and research.
High quality, safety and service is our purpose. Our products are satisfied with all customers, so we're so confident you'll love our safety gloves .
Do you have such experience? When preparing dinner, you cut your finger by accident and had to stop preparing dinner.
Would you believe it’s possible to get cutting glove that are ultra durable, comfortably breathable, and made for ultimate dexterity?
Come Here! Please Try Our Safety Cutting Gloves and Solve Your Confusions.
The One of Things You Must be Have in Kitchen
It’s important to have safety awareness when you working with sharp tools in kitchen.
These cut resistant gloves are made from level 5 cut resistant materials, designed to ensure the cut resistance of the glove, protect your hands safety.
Multipurpose for You
In addition to being used in the kitchen, you can also use outside the kitchen like: cutting cardboard, repairing cars, striping copper wire, gardening, etc.
Higher Comfort and Amazing Technology
High quality anti cut material provide maximum breath ability for your kitchen work, and make your hand stay dry and comfortable.
Unique transverse knitting tech ensures no redundant hem on the fingertip. This kitchen cutting glove offer you more dexterity and precision ability to catch slippery and awkward items.
Notice:
1.The cut resistant gloves are awesome, but they’re NOT 100% cut resistant, just give you an extra layer of protection and protect your hands from 99% injury, will NOT fully protect you from direct cuts.
That’s why you should still use caution when using
2. NOT a stab-resistant glove. It should be used safely during.
3.Do Not Machine Dry
Specification:
Size: M:3.35-3.75 in L:3.75-4.15 in
Pair: 2 pairs
- Protect Your Hand - Throw away the normal gloves and try to use our THOMEN cut resistant gloves. It is made from level 5 cut resistant material, protect your hands from 99% injury,10 times stronger than normal gloves. Let you enjoy cooking time.
- Excellent Comfort - Unique transverse knitting tech and elastic material provide superior grip, suitable for different size hands. It also allows maximum breathability for those long processes and your hands stay dry and comfortable. Will you amaze with it?
- Easy to Clean - Our upgrade safety cutting gloves can be washed by hand or dishwasher, as kitchen dish-washing towel. Wa, it is so useful for you!
- Multifunction - THOMEN anti cut gloves are great for oyster shucking, wood carving, whittling, butchering, peelers and mandolin slicers, yard working, garage working, dealing with broken glass, etc. Isn't it a pair of affordable and durable cut resistant gloves.
- Lifetime 100% Satisfaction - We're so confident that you'll love our cut resistant gloves. we'll refund every penny if you don't like it! Actually, most customers like it so much that they buy more than 1 and send to their friends and family as gift!
User questions & answers
Question: | how many gloves are included |
Answer: | I won't cut it, I guess I will leave the missing finger part inside the glove, in the palm area and sew it. |
Question: | Do you have a latex coated version |
Answer: | No te entendieron. |
Question: | Where are they made |
Answer: | Neither the Tag on the gloves or the packaging it comes in reveal the country of origin. I will tell you that they are effective in preventing cuts (when my wife bothers to wear them/ not so much when she didn’t ), comfortable, and well made. Hope this helps. |
Question: | How do these things work for preventing injuries with a box grater |
Answer: | Yes. They run small, though. Mine came in size M (no choice was offered at purchase),, and I can barely get them on. I wear M or L gloves. |
- DURABLE – 2 Pairs (4 Gloves) made with 13 Gauge Knitted Seamless HHPE/Nylon to protect and last through everyday use. Also, machine washer safe.
- COMFORTABLE – Superior grip for hands of different sizes while being breathable and lightweight.
- ENDLESS POSSIBILITIES – Great for variety of uses in the kitchen, garden, at work or wherever you need protection from blades.
- EASY TO USE – All 4 Gloves will fit either left or right hand. Make sure to purchase the correct size. Includes free hair net.
- ONE YEAR WARRANTY - Have peace of mind knowing all Fortem products are covered for a full year!
User questions & answers
Question: | Do these gloves protect against broken glass |
Answer: | Yes, just wash in top rack of dishwasher. Easy!! |
Question: | Some gloves say food grade, these do not say food grade? Are they food grade |
Answer: | they sell them for both |
Question: | I use to wear 8 1/2 gloves, will they fit or sould I go for the larger size |
Answer: | The American National Standards Institute (ANSI) defined 9 levels of cut resistance that indicate how many grams of cutting load a glove can withstand from a sharp blade before being penetrated. A1: 200 - 499 grams A2: 500 - 999 grams A3: 1000 - 1499 grams A4: 1500 - 2199 grams A5: 2200 - 2999 grams A6: 3000 - 3999 grams A7: 4000 - 4999 grams A8: 5000 - 5999 grams A9: 6000+ grams |
Question: | What does lifetime warranty mean |
Answer: | Nothing is made in the USA any more. You can help to change that by refusing to buy "made in China" product. Do it for your neighbor who is now out of work because of globalization. |
- ❤CUT PROTECTION :It is Cut Resistant Gloves made from level 5 cut resistant material and the gloves is awarded with the highest level 5 cut resistance certification,Provides additional safety to prevent cuts and abrasions, protect your hands from 99% injury;
- ❤COMFORT:Superior grip for hands of different shapes and sizes ,excellent comfort and dexterity to wear and grip breathable and lightweight,lexible operation, Not too hard, No sliding. The special high elastic nylon is blended to make the gloves fit your hand so well;
- ❤MULTIFUNCTION:Cut Resistant Gloves suitable for are meat cuttin processing, peelers and mandolin slicers, great for oyster shucking, wood carving, butchering, yard working, garage working, dealing with broken glassnd More;
- ❤EASY TO CLEAN : Keeping your gloves clean is easy,our upgrade safety cutting gloves can be washed by hand and machine washable。But we do recommend to let the gloves drip dry,throwing them into a dryer may cause damage/shrinkage to the microfiber tech that is instilled in each glove;
- ❤SATISFACTION :We're so confident that you'll love our cut resistant gloves. If there are any issues, simply reach out to us, we will provide you with perfect after sales service,24- hour service support before purchasing and after sales!
User questions & answers
Question: | My husband is missing a finger, and I usually modify his gloves by cutting off a finger and sewing it closed. Has anyone tried this? What to use |
Answer: | I won't cut it, I guess I will leave the missing finger part inside the glove, in the palm area and sew it. |
Question: | Hola buenas tardes quisiera comprar dos kit pero me puedes enviar 3pares de talla medio y 3pares de talla larga |
Answer: | No te entendieron. |
Question: | Where are these gloves made |
Answer: | Neither the Tag on the gloves or the packaging it comes in reveal the country of origin. I will tell you that they are effective in preventing cuts (when my wife bothers to wear them/ not so much when she didn’t ), comfortable, and well made. Hope this helps. |
Question: | Are these glove ambidextrous |
Answer: | Yes. They run small, though. Mine came in size M (no choice was offered at purchase),, and I can barely get them on. I wear M or L gloves. |
Product description
Cut Resistant Gloves Are Ultra Durable and Comfortably Breathable.
Feature:
Come with stainless steel Gloves and Cotton glove
Safety cut proof protect: Stainless steel wire with.
Stronger protection than ever, Updated material, more durable and longer time use.
Fit to both right and left hands
They can fit your hands perfectly like your second skin.
FDA compliant materials let the cut proof gloves come in direct contact with food items
Note: one size only, please measure palm's width, length of the middle finger and length of hand before buying. It is very important to avoid return.
Package Include:
1x Cut-resistant Glove (not a pair)
We are reliable household partner. With our gloves, you can enjoy your work every day!
- 【HIGHEST CUTTING LEVEL】- A9 cut resistant level protects your hands from scrapes and cuts. Made of high-strength HPPE fiber and stainless steel wire, the gloves have much higher cutting level than others.
- 【INCREDIBLY DURABLE】- The denser tissue makes your work gloves won’t tear easily like before! You will be surprised to find that your work gloves are more comfortable and tough. Also with HPPE fiber, you can use the gloves even longer time.
- 【WIDE USE】- FDA compliant materials let cut gloves come in DIRECT CONTACT with food items .You will protect cute fingers while cutting, slicing, shucking and peeling food in kitchen. It can also be used for garden, mechanic, fishing and construction work.
- 【PERFECT DESIGN】- Perfect fit with adjustable buckle and human engineering design. 7GG seamless shell construction provides fair wear fit.
- 【WHAT YOU GET】- One piece stainless steel wire mesh glove for SINGLE hand, order now and have a free-of-charge nylon cotton glove to protect your hands better.What’s more, it is easy to clean with water and soap, even for washers.
User questions & answers
Question: | Is this a pair left and right gloves |
Answer: | No. One glove. Either right or left hand. |
Question: | How do you clean the glove? Is it machine washable |
Answer: | I throw mine in the dishwasher, works great. |
Question: | What is the inner glove for? I had to size up to wear both, instructions are not in English, does inner glove add protection or just comfort |
Answer: | It appears to be just for added comfort, but I admit I no longer use the inner glove. It seems too much trouble to put it on first, then put on the steel mesh glove. I don't find it uncomfortable in any way to wear the steel mesh glove alone - it's not "pinchy" or irritating to the skin. I LOVE this glove! Has saved me from another ER visit from slicing my hand :) |
Question: | What is the ansi cut resistance rating |
Answer: | Hi, this gloves can reach cut-risistance level F. |
Latest Reviews
View all
Toys Child Melissa Doug Game Chairs
- Updated: 12.06.2023
- Read reviews

Wireless Dog Fence Collars
- Updated: 26.02.2023
- Read reviews

Professional Hair Dryer
- Updated: 26.01.2023
- Read reviews

Unknown Gshock Watches
- Updated: 07.07.2023
- Read reviews

Fuji Folding Bikes
- Updated: 01.04.2023
- Read reviews