10 best water line detectors

Product description

The Smart Water Leak Monitor Sensor has Wi-Fi capabilities so you can connect to your home network. Whether you are in the office or on the road, you can check the status via TUYA / Smart Life app at any time. At the same time, you can also choose to open SMS or PHONE VOICE CALL NOTIFICATION( Value-added Services).

1. With two alarm modes you can fully understand the situation of the water leakage, so you can handle it quickly and avoid further losses.

2. As soon as the water detector detects leaking water, 100dB alarm will sound within 1 second and an alarm message will be sent to the smartphone within 2-10 seconds (depending on the network speed).

3. Built-in rechargeable battery to avoid battery replacement. More comfortable and energy efficient.

4. The small water detector with 5.9ft long cable will not be damaged at high water level and will adapt to more complex installation environments.

5. The water sensor can also be used with the power turned off and the power down network, as the wireless alarm has a battery and a horn, it can also trigger an alarm in case of water leakage, so you can handle it quickly and avoid further losses.

(The water alarm automatically restores after the network is restored, the network does not need to be reconfigured.)

6. The 100dB alarm tone will not be hard, so you will be informed in time about the water leak.

7. With the TUYA App and the Quick Start Guide, it only takes a few minutes to install the device.

Everything you need for an installation can be found in the packaging - simply connect the water detector via the app to the Wi-Fi network, and you're done.

Note: Charge the water detector before use.

Delivery:

1 x water leak detector

1 x probe cable

1 x ring tone setting / reset pin

1 x user manual

1 x rubber pad

• 💎 RELIABLE PERFORMANCE 💎 If the water sensor detects leaking water or the preset limit overrun, the 100dB alarm will sound and alert you to the situation, preventing potential water damage.（❤ Please Note: Only support 2.4G Wi-Fi, we have published the operation video of this detector on YouTube. Please search "shonmau" to view it❤ ).
• 💎 DOUBLE SAFEGUARD & QUICK REPORTING 💎 As soon as the water detector detects leaking water, 100dB alarm will sound within 1 second and you smartphone will receive an alarm message by the Tuya APP within 2-10 seconds (depending on the network speed).This is free to use. 【IN ADDITION - we also provide the second level of security (value-added service), you can choose to open the SMS or phone call notification alarm function on the app. The annual value-added service fee is no more than $2.
• 💎 CHILDREN-EFFICIENT INSTALLATION & OPERATION 💎 No gateways and complicated cabling required, you can connect our water sensor to your home Wi-Fi in just a few simple steps (2.4G Wi-Fi only). Whether you are in the office or on the road, you can check the status via app at any time. You can also share this with others, and more people can receive alerts and track the progress of wireless sensor activity.
• 💎 WIDE APPLICATION 💎 The water monitor detector can be used in washer / bathrooms / basements / sinks / water heaters / aquariums dishwashers / refrigerators / fish Tanks / plumbing / toilets / behind toilet / water filtration units / garbage disposals / sump pumps etc. It can also be used to monitor the preset limit of water level in bathtub / pool / pool and other scenarios. The small water detector with 5.9ft long cable probe will adapt to more complex installation environments.
• 💎 REMOTE ELECTRONIC WATER SENSOR ALARM💎 7 * 24 Hours Fast Response Service-You can always contact us, if there is any question about the water alarm. We will respond within 24 hours, avoid making you wait so long.

Product features

Whether you are in the office or on the road, you can check the status via TUYA / Smart Life app at any time,any where.

1. With two alarm modes you can fully understand the situation of the water leakage, so you can handle it quickly and avoid further losses.

2. As soon as the water detector detects leaking water, 80dB alarm will sound within 1 second and an alarm message will be sent to the smartphone within 2-10 seconds (depending on the network speed).

3. Built-in rechargeable battery to avoid battery replacement. More comfortable and energy efficient.

4. The small water detector with 5.9ft long cable will not be damaged at high water level and will adapt to more complex installation environments.

5. The water sensor can also be used with the power turned off and the power down network, as the wireless alarm has a battery and a horn, it can also trigger an alarm in case of water leakage, so you can handle it quickly and avoid further losses.

(The water alarm automatically restores after the network is restored, the network does not need to be reconfigured.)

6. The 80 dB alarm tone will not be hard, so you will be informed in time about the water leak.

7. With the TUYA App and the Quick Start Guide, it only takes a few minutes to install the device.

Everything you need for an installation can be found in the packaging - simply connect the water detector via the app to the Wi-Fi network, and you're done.

Tuay APP No Monthly F-ee Push Water Leak Alarm Notification

When the water detector is connected to the network normally, if a water leak is detected, Tuya APP will send you an alarm notification within a few seconds. So that you can deal with it in time to avoid your greater property loss. There is no F-ee to use this function.

Tuya APP can not only connect our Wi-Fi water alarm, but also connect all Tuya smart products and monitor them in real time. Moreover, many control products of Tuyasmart can be connected with Alexa and Google Home to realize voice control, such as smart switches, smart bulbs, etc

VALUE ADDED SERVICES

If you open this value-added service function, you can not only receive free reminders from Tuya app, but also receive SMS or voice call alarm notifications.

Why Choose Our Water Detector Alarm?

When there are elderly people at home who forget to turn off the water, children play with water and forget to turn off the water, in these cases, if you put a detector in these places, you will receive a water leak in time.

Wide Application Scenarios of Wi-Fi Water Detector, Home, Office etc.

You need to connect the product before using this function

Enter the main interface of Tuya APP-Smart-Automation-then click "+" in the upper right corner

Select the alarm status of the detector

Water leak sensor-Flooding detection state-Water immersion alarm

Select water leak notification push

Send notification-Select notification method (Phone notification / SMS notification), you can choose one of them. If these functions are not enabled in, there will be a prompt for you to open them. You can quickly open them according to the prompt on the app interface.

In the figure, the function of opening SMS is taken as an example

When a leak is detected, your phone will receive an SMS alert reminder (if you choose to activate the SMS notification function), this feature is 2 D-ollar a year. If you activate the voice call notification function, you will receive a voice alarm call.

Product description

tolviviov Water Leak Detector - Guard Your Home in Real-Time

* Uses Wi-Fi to connect with the Smart Life APP. APP remote control, alarm reminder.

* Real-time remind, never miss a leak again.

* 3 ft Long enough probe cable, fits for complex installation environments.

* Fits for laundry, basement, kitchen, bathroom, sink, floor or aquariums. Also can monitor the preset limit of water level in bathtub, pool and other scenarios.

* The base is fixed with 3M double-sided adhesive. When the base is fixed, the alarm can be removed directly without removing the base.

NO HUB REQUIRED.

HOW TO CONFIGURE

Download the Smart Life APP

1.Launch the app and tap the Plus ( + ) in the top right corner to add a Water sensor device.

2. Select Add manually, Security & Sensors, then Flood Detector (Wi-Fi)

3.Choose your Wi-Fi network and Enter the password. Then tap Next.

4. IMPORTANT !!! Press and hold the button on the water sensor until the light is SLOWLY blinking (2s/time). Tap the “EZ Mode” on the top right corner, change to “AP Mode”. Select “Confirm indicator slowly blink” at the bottom，tap Next.

5. Tap Go to Connect.

6. Select WLAN on your mobile phone setting.

7. Choose SmartLife-XXXX network in the WLAN setting.

8. Switch back to Smart Life app when WLAN is successfully

9. It will show Adding device on the Smart Life App.

10. Now your Water Sensor is successfully added. Tap Done.

Important! !!Important! !!Important! !!

1. The wireless network connected to the mobile phone is 2.4G signal

2. Please change the EZ mode in the upper right corner to AP mode

3. Please keep the blue light in the square button blinking during the connection process

• 💎MONITOR ANYWHERE,ANYTIME: When the water leak sensor detects a leak, your phone will receive an alarm notification by Smart Life APP within 2-10 seconds (depending on the signal). This is free to use. And another way receiving notification is SMS or phone call notification(Value-added Services).
• 💎UPGRADED VERSON：When you are busy in housework and your phone is not around, our 100dB alarm is loud enough for you to hear. Detect water leakage in time, and prevent potential water damage successfully.
• 💎CONVENIENCT OPERATION: Works with your WiFi at home; No hub required.You can also share it with others, more people can receive alerts.Two AAA batteries can last up to 1.5 years.Two AAA batteries included.
• 💎VERSATILE USE: The water monitor detector can be used in many places such as bathroom, kitchen, basement, dishwasher etc..The water detector alarm can also be used to detect the water level of the bathtub,pool and so on.
• 💎EASY SETUP:Just place your WiFi Water Sensor and start working in minutes. All the accessories for installation are included in the package, no additional purchase is required.

Product description

tolviviov Water Leak Detector - Guard Your Home in Real-Time

* Uses Wi-Fi to connect with the Smart Life APP. APP remote control, alarm reminder.

* Real-time remind, never miss a leak again.

* 3 ft Long enough probe cable, fits for complex installation environments.

* Fits for laundry, basement, kitchen, bathroom, sink, floor or aquariums. Also can monitor the preset limit of water level in bathtub, pool and other scenarios.

* The base is fixed with 3M double-sided adhesive. When the base is fixed, the alarm can be removed directly without removing the base.

NO HUB REQUIRED.

HOW TO CONFIGURE

Download the Smart Life APP

1.Launch the app and tap the Plus ( + ) in the top right corner to add a Water sensor device.

2. Select Add manually, Security & Sensors, then Flood Detector (Wi-Fi)

3.Choose your Wi-Fi network and Enter the password. Then tap Next.

4. IMPORTANT !!! Press and hold the button on the water sensor until the light is SLOWLY blinking (2s/time). Tap the “EZ Mode” on the top right corner, change to “AP Mode”. Select “Confirm indicator slowly blink” at the bottom，tap Next.

5. Tap Go to Connect.

6. Select WLAN on your mobile phone setting.

7. Choose SmartLife-XXXX network in the WLAN setting.

8. Switch back to Smart Life app when WLAN is successfully

9. It will show Adding device on the Smart Life App.

10. Now your Water Sensor is successfully added. Tap Done.

Important! !!Important! !!Important! !!

1. The wireless network connected to the mobile phone is 2.4G signal

2. Please change the EZ mode in the upper right corner to AP mode

3. Please keep the blue light in the square button blinking during the connection process

• 💎MONITOR ANYWHERE,ANYTIME: When the water leak sensor detects a leak, your phone will receive an alarm notification by Smart Life APP within 2-10 seconds (depending on the signal). This is free to use. And another way receiving notification is SMS or phone call notification(Value-added Services).
• 💎UPGRADED VERSON：When you are busy in housework and your phone is not around, our 100dB alarm is loud enough for you to hear. Detect water leakage in time, and prevent potential water damage successfully.
• 💎CONVENIENCT OPERATION: Works with your WiFi at home; No hub required.You can also share it with others, more people can receive alerts.Two AAA batteries can last up to 1.5 years.Two AAA batteries included.
• 💎EASY SETUP:Just place your WiFi Water Sensor and start working in minutes. All the accessories for installation are included in the package, no additional purchase is required.
• 💎VERSATILE USE: The water monitor detector can be used in many places such as bathroom, kitchen, basement, dishwasher etc..The water detector alarm can also be used to detect the water level of the bathtub,pool and so on.

User questions & answers

Question:	How do you turn up the volume for local alarm detection
Answer:	i was not able to manually reset. once it trips, it will stay tripped until it dries out. There is no override.

Product description

The Flume Smart Water Monitor provides homeowners and renters with real-time water usage and leak detection right on their smartphone. Get notified of leaks, set up budgets and stop excessive usage by seeing when and where your water is being used. No longer do you have to worry about a surprise water bill or damage being cause by small leaks or burst pipes. The Flume Water Sensor easily straps around your existing water meter (both indoor and outdoor meters) without having to cut any pipes. The sensor is waterproof, battery powered (up to a 2 year battery life) and communicates up to 1000 feet with the "bridge", which is located in your house and connected to your WiFi network.

• 24/7 INTELLIGENT LEAK DETECTION: Protect your family home from water damage. Monitor and control water usage inside and out, including irrigation.  Know your home is secure with real-time leak alerts sent to your smartphone with Smart Home Water Monitoring.
• REDUCE YOUR WATER BILL: Take the guessing game out of your water usage.  Flume monitors water consumption and provides real-time water usage data right on your Smartphone.  Utilize Flume’s budget tool to track use daily, weekly or monthly and take action to save. 
• 5 MINUTE INSTALLATION: The Flume Smart Home Water Monitor straps around your home’s existing water meter in minutes without the need for a plumber or tools. Flume is compatible with 95% of water meters, more details below.
• REMOTE WATER MONITORING: See when your family or renters are home, how much water they use and where you can save water. Resolve water issues in real time from anywhere with the Flume App and Web Portal. (Free on the Apple App Store and Google Play)
• SMARTPHONE ALERTS & ALEXA ENABLED DEVICE - Flume puts your data on your favorite smart devices. We provide real-time leak detection and water use notifications on your smartphone and Alexa devices so you can protect your home when you're on the go.

User questions & answers

Question:	Does the app show current gpm flow per entire house in real time? i need to capture gpm flow of selected appliances one at the time
Answer:	I got mine and it’s angled noticeably up as well. I don’t think it’s suppose to be designed this way, as the bar will definitely roll towards the up-rights. It’s also not as shown/demonstrated on the video.
Question:	My badger 1" meter is an eight digit, hre (high resolution encoder); will the device measure the finest resolution digits
Answer:	I believe 800 pounds. You can email fitness reality and they will answer all questions you may have
Question:	How often do the batteries need to be replaced
Answer:	45.5wx50Lx 80.5h all inches.. hight is adjustable about 2 in. Shown is max hight.
Question:	In Austin where we live it gets hot in the summer. That heat tends to fry batteries quickly. How long do your batteries hold up in hot conditions
Answer:	It took me with socket and wrench an hour and half. It comes with 2 wrench type pieces but faster with socket

Product features

Protect Your Home Inside & Out With 24/7 Leak Detection Monitoring

Flume provides complete coverage by detecting water leaks inside of your home as well as in your lawn or garden. If Flume detects a water leak or unusually high water use, you'll be notified immediately via text, email or push notification anywhere you are.

Control Your Water Use & Conserve Water

Flume gives you real-time access to your water data with 24/7 water usage monitoring. You can determine which activities (or kids!) are using the most water with instant data and take action to avoid excess use.

Manage Your Water Bill

Never be surprised by a high water bill again. Flume lets you set daily, weekly or monthly water budgets and notifies you as you approach your limit. You can also measure your water use against like homes in the Flume Family.

Take Control of Your Water Wherever You Are With the Flume App

We know you are always on the move, take the peace of mind with you knowing your home is protected 24/7 with Flume.

Download & Install the Flume App

The app will guide you through the entire installation process

Connect the Included Wifi Bridge to Your Network

This device communicates with your Water Sensor via low-power, high-range RF and can be placed anywhere in your house

Strap The Sensor Around Your Existing Water Meter

Installs in minutes, no expensive pipe cutting or plumbing experience required. Long-life batteries are included, and no external power is needed.

The Flume Smart Home Water Monitor & Leak Detector Comes With Everything You Need to Start Protecting Your Home Today

We know you aren't a master plumber so we have included everything you need to get you going in minutes. The Flume Smart Water Monitor & Leak Detector comes with:

• An easy to install Flume Water Monitor complete with mounting straps
• A wifi bridge with power cord
• A meter lid tool

Flume is compatible with 95% of water meters: The Sensor works on both outside and indoor water meters within 1000ft reach of the Flume Bridge and is compatible with most water meters used in the United States today. However, you should check to see if your meter is compatible before you purchase a Flume device. The following water meters are NOT compatible with our water sensor:

• E-Series
• iPerl
• Master Meter (1 inch and above)

To determine the type of meter you have, you can look on the dial of the water meter. Flume is only licensed for use in the United States.

Product description

Features :

1. The Transmitter has the function of self-inspection to detect its own working status and to display it on the LCD screen for user's reference

2. The sensitivity of the receiver can be adjusted either manually or automatically

3. The receiver can sweep frequency automatically

4. Both the transmitter and the receiver can work under mute mode

5. Additional transmitters are available to extende or distinguish multiple signals.

6. Compactness-durability and portability

7. Auto power off within 10 minutes.

8. Flashlight Function.

9. Backlight Function.

10. Mute Function.

Specification:

Voltage Measurement Range: Transmitter: 12V-400V (AC / DC)

Output Signal: Transmitter: 125KHz

Voltage: Transmitter: maximum 400V (AC / DC)

Cable Depth Measurement :Receiver 0-2.5 m (wall / underground cable)

Main Voltage Measurement : Receiver 0-0.4m

Work Environment:Transmitter:0~40℃; Receiver:0~40℃

Storage Temperature: Transimiter:-20℃~60°c; Receiver:-20℃~60℃

Relative hamidity(no condensation):Transmitter Maximum:80%; Receiver Maximum:80%

Measuring Height: Transmitter Maximum:2000m; Receiver Maximum:2000m

General Characteristics:

Power Supply: Receiver: 1 * 9V LR61 (not included); Transmitter: 6 * 1.5vAAA (not included)

Dimension: Receiver: 241.5 * 78 * 38.5mm ; Transmitter: 190 * 89 * 42.5mm

Product Weight: Receiver: 263g; Transmitter: 370g

Package Size: 28 * 20 * 8.5cm / 11 * 7.8 * 3.3in

Package Weight: 1053g / 2.3lb

• Detecting cables, electrical lines-water/gas supply pipelines buried in-wall or earth
• Detecting interruptions and short circuit in cables and electrical lines buried in-wall or earth
• Detecting fuses and assigning current circuits. Detecting interruptions and short-circuits in-floor heating
• Tracing sockets and distribution sockets having accidentally been covered by plastering
• Tips: You need to read the user manual carefully before learn using this product; the product does not contain AAA batteries, you need to purchase it yourself; if you have any questions, please contact our customer service team first

User questions & answers

Question:	Will this tool locate stranded 4/0 aluminum power cable buried two feet underground or does it work only with non-stranded wire
Answer:	It is unlimited distance, as long as there is a network
Question:	Will it detect a metal fish tape in a PVC sewer pipe
Answer:	Yes, one application can add multiple trackers
Question:	Can this tool locate 24v circuit
Answer:	32g
Question:	Can this tool help me to find the shortage in the house wiring behind the walls
Answer:	No that’s was the problem I had too the SIM card they said to use are no longer using 2g and the tracker is made to run off 2g only

Product features

Features :

1. The Transmitter has the function of self-inspection to detect its own working status and to display it on the LCD screen for user's reference

2.The sensitivity of the receiver can be adjusted either manually or automatically

3. The receiver can sweep frequency automatically

4. Both the transmitter and the receiver can work under mute mode

5. Additional transmitters are available to extende or distinguish multiple signals.

6. Compactness-durability and portability 7. Auto power off within 10 minutes.

8. Flashlight Function.9. Backlight Function.10. Mute Function.

Applications:

Installation and maintenance of weak current system, communication line, comprehensive wiring circuit, telephone system, computer network, other metal wire circuit etc.

Specification:

Voltage Measurement Range: Transmitter: 12V-400V (AC / DC) Output Signal: Transmitter: 125KHz Voltage: Transmitter: maximum 400V (AC / DC) Cable Depth Measurement :Receiver 0-2.5 m (wall / underground cable) Main Voltage Measurement : Receiver 0-0.4m Relative hamidity(no condensation):Transmitter Maximum:80%; Receiver Maximum:80% Measuring Height: Transmitter Maximum:2000m; Receiver Maximum:2000m General Characteristics: Power Supply: Receiver: 1 * 9V LR61 (not included); Transmitter: 6 * 1.5vAAA (not included) Dimension: Receiver: 241.5 * 78 * 38.5mm ; Transmitter: 190 * 89 * 42.5mm

Package List:

1 * MASTECH MS6818 Transmitter

1 * MASTECH MS6818 Receiver

1 * Pair Test Lead

1 * Pair Crocodile Clamps

1 * Pair Test Probes

1 * Grounding Rod

1 * English Manual

1 * Carrying Bag

• Note : the AAA batteries not include

Product description

NF-826 Cable Locator is a portable instrument consisting of a transmitter, a receiver and some accessories. With advanced integrated parts and digital circuit technologies, it is characterized by highly stable and reliable electrical performance. With this Cable Locator to effectively assist users to locate and detect cables, you no longer need to take your chance.



Features :

1. The Transmitter has the function of self-inspection to detect its own working status and to display it on the LCD screen for user's reference.

2. The sensitivity of the receiver can be adjusted either manually or automatically.

3. The receiver can sweep frequency automatically.

4. Both the transmitter and the receiver can work under mute mode.

5. Additional transmitters are available to extende or distinguish multiple signals.

6. Compactness-durability and portability.

7. Auto power off within 10 minutes.

8. Flashlight Function.

9. Backlight Function.

10. Mute Function.



Applications:

Installation and maintenance of weak current system, communication line, comprehensive wiring circuit, telephone system, computer network, other metal wire circuit etc.



Specification:



Transmitter:

Output signal:125KHz

Voltage measurement range: 12V-400V (AC / DC)

Voltage's dielectric strength: Max. 400V AC/DC



Receiver:

Cable Depth Measurement : 0~2.5m, the depth of tracking depends on the material and specific applications.

Grid voltage identification: about 0-0.4m



Work Environment:Transmitter:0~40℃; Receiver:0~40℃

Storage Temperature: Transimiter:-20℃~60°c; Receiver:-20℃~60℃

Relative hamidity(no condensation):Transmitter Maximum:80%; Receiver Maximum:80%

Measuring Height: Transmitter Maximum:2000m; Receiver Maximum:2000m



Package List:

1*Transmitter

1*Receiver

1*user Manual

2*Alligator Clips (black, red)

2*Test Leads (black, red)

1*Grounding rod

• Detecting and Locating breaks and short circuit in cables and electrical lines buried in wall or underground.
• Detecting the laid metal tap water pipe and metal heating pipe.
• Detecting interruptions and short-circuits in floor heating.
• Detecting fuses and assigning current circuits,tracing sockets and junction boxes having accidentally been covered by plastering.
• The transmitter is integrated with the function of AC/DC voltmeter, which can measure 12 to 400V AC/DC voltage on a linear basis.

User questions & answers

Question:

Why does my charger only blink once on recharging

Answer:

The SONY RX100 users guide says that it takes approximately 155 minutes ( two hours 35 minutes, 2:35) to charge the NP-BX1 via the USB cable when the battery is in the camera. Figure about two and a half hours. I hope to never use this, except as a back up. They physics of recharging should be insensitive to the brand labels, so doubt this will perform much differently. Hope that helps. Shoot all day (or just about) charge all night.

Product description

How it works



1: Plug the Wifi gateway into socket, pull out the water sensors battery insulating tab.

2: Download ‘Govee Home’ on App Store or Google Play to your cellphone.

3: Open the app and sign up with your email account.

4: Click the icon '+' at the top right corner and select H5040 device.

5: Follow the app prompt to connect your wifi Gateway with your router(not support 5G wifi).

6: Name each sensor like Basements, Kitchen Sinks, Water Heaters and put the water sensors on the detecting location.

7:Get email, Push notifications and alert on your smartphone when leak happened

• Real-time Alerts: Connect the gateway to WiFi, and it will instantly send emails, App notifications & alerts to your phone when water leakage occurs even you're not at home. Water sensors and gateway are paired right out of the box. Note: Doesn't support 5G WiFi.
• Loud Alarm with Mute: If WiFi is not temporarily available, our 100dB alarm is loud enough to be heard. Press the Mute button to silence the alarm when you find the leak.
• Drip and Leak Alerts: Water sensor comes with 2 groups of back water detector probes & 1 group of front probes for pipe dripping detection. Use the App to name each sensor with its location.
• Connects to Multiple Sensors: WiFi connection gateway has a stronger and more stable signal transmission & lets you connect with multiple sensors simultaneously (10 max).
• IP66 Waterproof : The completely sealed IP66 waterproof design allows for extended use in high moisture areas.

User questions & answers

Question:	How can I add my devices? I deleted 2 sensors to get rid of a fault message and can’t get them back on my app
Answer:	Hello, This is a direct spark ignition.
Question:	I tried connecting with wifi several times as it indicated - I had next to my router with 2.4 G connection. Any help
Answer:	No it is not...It is actually made by HTP.
Question:	How far away can the gateway be? I have 3 floor house and need a sensor on each floor. Will that be a problem? Can you add more sensors
Answer:	Charge it for 1-2Charge it for 1-2 hours each time, and the indicator light above will remind you when the product is fully charged. hours each time, and the indicator light above will remind you when the product is fully charged.
Question:	how do I purchase additional sensors? I cannot find them - Govee B
Answer:	It is divided into two states: open and closed. It has two different colors divided into purple light and red light. Violet light can detect whether there is cat moss by illuminating the cat. The red light has five different patterns, which can be switched by the rotating button. Hope my answer can help you.

Product features

Govee WiFi Water Leak Detector

Using the connection between the gateway, water sensors, and Govee Home App, you can monitor any leakages on your phone while you are away from home. There are no annoying wires, which makes monitoring even easier. You can also name each WiFi water sensor according to their location on the App. When a leak occurs, the sensors will not only sound a loud alarm, but email and App notifications will also be sent to your phone. You can clearly know where the leakage happened and deal with it in time.

Open the App, Connect to H5040.

After downloading 'Govee Home' from the App Store or Google Play to your phone, please open the App and sign up with your email account. Then click the icon '+' at the top right corner and select H5040 device.

Press the Pairing Button for 3 seconds

Press the pairing button for 3 seconds until the red and blue light flash alternately and then input the WiFi password on your phone. Please note any special characters, blank spaces, and so on.

Connect Your WiFi Gateway

Follow the app prompt to connect your WiFi "Govee_Gateway_xxxx" with your router (doesn't support 5G WiFi). Place the water sensors in the detecting location and name each water alert .eg. basement, kitchen. Then you can begin to monitor the water leakage on your phone!

Monitor Water Leakage on Your Phone

After a successful connection, you can place the sensors and start to monitor water leakage on your App. Note: Please ensure the App and your phone settings are set to allow "push" notifications. The gateway will not send push notifications if the leak happens again in 90 seconds.

WiFi Gateway Supports Up to 10 Leak Detectors

Compared with others, our Govee WiFi gateway connection design has a stronger and more stable signal transmission. It works as a bridge to connect your WiFi with multiple water sensors. It receives the water leakage info from the sensors when leaking happens and sends it to the Govee Home App on your phone.

Loud Adjustable Audible Alarm with Sensitive Sensor Probes

Sensitive Sensor Probes: With 2 groups of water detector probes on the back and one group of probes on the front, the water alarm will swiftly notify you about any water pipe dripping.

Loud Adjustable Audible Alarm: Ultra-loud adjustable 0-100 dB alarm allows you choose a comfortable sound level to detect any water leakage when WiFi is not available in your home.

• Dripping and Leaking Alarm: Besides 2 groups of back water detector probes, each detector also has 1 group of front probes for pipe dripping.
• Wireless and Easy to Use: No wire or setup required, the mini size allow you to put it on any place where the water leak may be happen. With kit "B07QP153GT", you are able to monitor leaks on your phone even you're not at home.
• Adjustable Alarm Audio: Each water leak detector features an 0-100 dB adjustable alarm audio. Loud enough to be heard even if leak happens in basement, press the button to mute the sound when you find the leaking place.
• Low Battery Alert: The water sensor alarm will beep and flash red light when battery is low, or press the button on it to test the battery level.
• IP66 Waterproof: The completely sealed waterproof design allows for extended use in high moisture areas.

User questions & answers

Question:	If you push the button to silence it, how long does it take to reset to working mode
Answer:	According to the directions it may be installed in an existing spray hose opening or if drilling another hole is needed, the 1 3/8" maximum diameter hole is required.
Question:	I don't care about pairing it with anything so will these still work if they are not paired to a device
Answer:	You probably can
Question:	Does it have a volume control
Answer:	Yes, the spout does swivel
Question:	Anybody experienced false alarm from these? Last night at 2;45 got pushed alarm on phone... no alarm sound, nothing
Answer:	It is on a 20 amp breaker

Product features

Govee Water Leak Detector

Water Leak Detector has an ultra-loud 100dB alarm, can be heard even in basement. Press mute button when you find leak (dry probes, then press mute or alarm will sound again after 8s). Has 2 groups of back probes and 1 front probe for pipe dripping. Place it in bathrooms, basements, by water heaters to detect leaks.

Pull Out the Insulation Sheet

Place It On the Detecting Location

Press to Mute When Hearing Alarm

Burst

Leak

Overflow

Product description

General Purpose Soil Probe/Locator, Shaft Length 48 In., Shaft Dia. 1/2 In., Shaft Material Fiberglass W/Zinc Tip, Tip Zinc Metal, Handle Type Straight W/T-Grip

• Package length :12.954 cm
• Package width :13.716 cm
• Package height :184.15 cm
• Made in India

User questions & answers

Question:	What the difference in the orange Nupla 76401 to this one
Answer:	I do not think so. That camera is a small SLR which uses the NP-FM500H battery, not this NP-BX1

Product features

Ideal for Soil Probing

The Nupla PRB4T 69401 Classic-T 4' Soil Probe with Metal Tip is perfectly designed with the metal tip slightly larger than the rod, allowing easy and free movement of the probe up and down in the soil with minimal drag against the hole. Safe and easy to be used, it is lightweight and works in all soil conditions.

Product description

The product is Wet Switch Flood Detector. This product is easy to install. The product is highly durable. Manufactured in China.

• Country Of Origin: United States
• Model Number: WS-1
• Item Package Dimension: 7.5" L x 4.1" W x 14.0" H
• Item Package Weight: 7.0 lb

User questions & answers

Question:	can a defective one be cut to turn on air conditioning until I can buy a replacement
Answer:	Just an alert on your app
Question:	Can I install this in line with the existing float switch for double protection
Answer:	I had the exact same problem. It will notify my cell phone via the Smart Life app, and the Smart Life skill is loaded in Alexa, Alexa does not see it as a device. I think Amazon needs to fix this.
Question:	Is this device UL listed
Answer:	No, I do not think so. But the alarm is not very loud, which can be either pros or cons.
Question:	It is a latching relay, correct ? Manual resetting is necessary
Answer:	They do not still replacement pads. If you call or email support they will send you a complete unit, including new pads.