12 best water detectors

Product description

How it works



1: Plug the Wifi gateway into socket, pull out the water sensors battery insulating tab.

2: Download ‘Govee Home’ on App Store or Google Play to your cellphone.

3: Open the app and sign up with your email account.

4: Click the icon '+' at the top right corner and select H5040 device.

5: Follow the app prompt to connect your wifi Gateway with your router(not support 5G wifi).

6: Name each sensor like Basements, Kitchen Sinks, Water Heaters and put the water sensors on the detecting location.

7:Get email, Push notifications and alert on your smartphone when leak happened

• Real-time Alerts: Connect the gateway to WiFi, and it will instantly send emails, App notifications & alerts to your phone when water leakage occurs even you're not at home. Water sensors and gateway are paired right out of the box. Note: Doesn't support 5G WiFi.
• Loud Alarm with Mute: If WiFi is not temporarily available, our 100dB alarm is loud enough to be heard. Press the Mute button to silence the alarm when you find the leak.
• Drip and Leak Alerts: Water sensor comes with 2 groups of back water detector probes & 1 group of front probes for pipe dripping detection. Use the App to name each sensor with its location.
• Connects to Multiple Sensors: WiFi connection gateway has a stronger and more stable signal transmission & lets you connect with multiple sensors simultaneously (10 max).
• IP66 Waterproof : The completely sealed IP66 waterproof design allows for extended use in high moisture areas.

User questions & answers

Question:	How can I add my devices? I deleted 2 sensors to get rid of a fault message and can’t get them back on my app
Answer:	Hello, This is a direct spark ignition.
Question:	I tried connecting with wifi several times as it indicated - I had next to my router with 2.4 G connection. Any help
Answer:	No it is not...It is actually made by HTP.
Question:	How far away can the gateway be? I have 3 floor house and need a sensor on each floor. Will that be a problem? Can you add more sensors
Answer:	Charge it for 1-2Charge it for 1-2 hours each time, and the indicator light above will remind you when the product is fully charged. hours each time, and the indicator light above will remind you when the product is fully charged.
Question:	how do I purchase additional sensors? I cannot find them - Govee B
Answer:	It is divided into two states: open and closed. It has two different colors divided into purple light and red light. Violet light can detect whether there is cat moss by illuminating the cat. The red light has five different patterns, which can be switched by the rotating button. Hope my answer can help you.

Product features

Govee WiFi Water Leak Detector

Using the connection between the gateway, water sensors, and Govee Home App, you can monitor any leakages on your phone while you are away from home. There are no annoying wires, which makes monitoring even easier. You can also name each WiFi water sensor according to their location on the App. When a leak occurs, the sensors will not only sound a loud alarm, but email and App notifications will also be sent to your phone. You can clearly know where the leakage happened and deal with it in time.

Open the App, Connect to H5040.

After downloading 'Govee Home' from the App Store or Google Play to your phone, please open the App and sign up with your email account. Then click the icon '+' at the top right corner and select H5040 device.

Press the Pairing Button for 3 seconds

Press the pairing button for 3 seconds until the red and blue light flash alternately and then input the WiFi password on your phone. Please note any special characters, blank spaces, and so on.

Connect Your WiFi Gateway

Follow the app prompt to connect your WiFi "Govee_Gateway_xxxx" with your router (doesn't support 5G WiFi). Place the water sensors in the detecting location and name each water alert .eg. basement, kitchen. Then you can begin to monitor the water leakage on your phone!

Monitor Water Leakage on Your Phone

After a successful connection, you can place the sensors and start to monitor water leakage on your App. Note: Please ensure the App and your phone settings are set to allow "push" notifications. The gateway will not send push notifications if the leak happens again in 90 seconds.

WiFi Gateway Supports Up to 10 Leak Detectors

Compared with others, our Govee WiFi gateway connection design has a stronger and more stable signal transmission. It works as a bridge to connect your WiFi with multiple water sensors. It receives the water leakage info from the sensors when leaking happens and sends it to the Govee Home App on your phone.

Loud Adjustable Audible Alarm with Sensitive Sensor Probes

Sensitive Sensor Probes: With 2 groups of water detector probes on the back and one group of probes on the front, the water alarm will swiftly notify you about any water pipe dripping.

Loud Adjustable Audible Alarm: Ultra-loud adjustable 0-100 dB alarm allows you choose a comfortable sound level to detect any water leakage when WiFi is not available in your home.

• Dripping and Leaking Alarm: Besides 2 groups of back water detector probes, each detector also has 1 group of front probes for pipe dripping.
• Wireless and Easy to Use: No wire or setup required, the mini size allow you to put it on any place where the water leak may be happen. With kit "B07QP153GT", you are able to monitor leaks on your phone even you're not at home.
• Adjustable Alarm Audio: Each water leak detector features an 0-100 dB adjustable alarm audio. Loud enough to be heard even if leak happens in basement, press the button to mute the sound when you find the leaking place.
• Low Battery Alert: The water sensor alarm will beep and flash red light when battery is low, or press the button on it to test the battery level.
• IP66 Waterproof: The completely sealed waterproof design allows for extended use in high moisture areas.

User questions & answers

Question:	If you push the button to silence it, how long does it take to reset to working mode
Answer:	According to the directions it may be installed in an existing spray hose opening or if drilling another hole is needed, the 1 3/8" maximum diameter hole is required.
Question:	I don't care about pairing it with anything so will these still work if they are not paired to a device
Answer:	You probably can
Question:	Does it have a volume control
Answer:	Yes, the spout does swivel
Question:	Anybody experienced false alarm from these? Last night at 2;45 got pushed alarm on phone... no alarm sound, nothing
Answer:	It is on a 20 amp breaker

Product features

Govee Water Leak Detector

Water Leak Detector has an ultra-loud 100dB alarm, can be heard even in basement. Press mute button when you find leak (dry probes, then press mute or alarm will sound again after 8s). Has 2 groups of back probes and 1 front probe for pipe dripping. Place it in bathrooms, basements, by water heaters to detect leaks.

Pull Out the Insulation Sheet

Place It On the Detecting Location

Press to Mute When Hearing Alarm

Burst

Leak

Overflow

• World's Longest Wireless Range: Powered by LoRa technology, the long-range yet low-power system offers the industry’s longest receiving range in the market (1/4 mile). Our long-range coverage enables its use in areas challenging for most residential Wi-Fi systems, such as basements, outdoor porch/patio areas, sheds, free-standing garages, even remote outbuildings on your property.
• Easy and Effective Property Protection: The YoLink wireless Water Sensor could not be easier to install; just place near or under the equipment you wish to monitor. Suggested uses are near or under sump pumps, toilets, water heaters, laundry machines, dishwashers, sinks, fish tanks and any other location subject to water leaks and flooding.
• Early-Warning Notifications: Receive real-time early-warning notifications (in the form of smartphone banner alerts, limited SMS/text messages, and emails) and protect your home and property from water damage; Due to the water-tight and submersible design of the original Water Leak Sensor, an internal sounder/siren would not be heard outside of the water-tight housing. For an audible alarm, consider our Siren Alarm or consider the Water Leak Sensor 2 which has a built-in sounder.
• Low-Power Means Longer Battery Life: Because of the low power consumption, device batteries may last 5 years or more (depending on application and device usage/activity), on standard AAA Alkaline batteries (lithium batteries not required)!
• From Simple to Super-Smart: After setting up your notification preferences, keep it simple and let the YoLink system do the rest and monitor your home and property for you. Or, utilize available advanced automation features, including 3rd-party integration with Alexa and IFTTT, to interact with other YoLink and 3rd-party smart devices. Limited only by your imagination!

User questions & answers

Question:	Is there any monthly or yearly fee to connect to a service
Answer:	It is hard to silence the alarm unless you make a minor modification in advance. Don't wait until the 130 dB siren is going before you work out how to disable the alarm. I've had it blaring in my ears while I frantically try to open the case to disconnect the battery, only to find that opening it is very difficult, even with the aid of a tool such as a flat-head screwdriver. What I've done since is filed down the locking tabs slightly, just enough that the plastic case still locks but is much easier to open when the alarm sounds, so that the battery can be disconnected. Then you can address the water leak in relative peace.
Question:	I don't see any rope sensors which is bad for covering areas like washers, fridge, and water heaters. Any rope solutions I'm unaware of with this
Answer:	The wire has no gauge markings- printed or imprinted. Comparing the wire side by side with a wire stripper, appears to be 18 gauge and it is definitely stranded copper. It is most assuredly no larger than 18 gauge so I would lean towards 18 to 20. I don’t know your application as to why you would need to extend the original length but I can tell you that the device is really loud when activated - if that helps you any.
Question:	How to make with Alexa? Using a routine
Answer:	Hello, thank you for your question. It is a constant, steady high pitch alarm sound. It will keep going until it is removed from water.
Question:	What are the dimensions of the water sensors? (Inches and centimeters
Answer:	Hello, they use 9V battery. Batteries are included.

Product features

YoLink Smart Water Leak Sensor

• Works with Alexa - Receive voice announcements of changes detected by sensors in your home
• Works with IFTTT – Trigger Customer Automations Using IFTTT
• Real Time Status – Check the real-time water/moisture status of the sensor via the YoLink App
• Battery Status – Receive low-battery alerts before batteries need to be replaced
• YoLink Control – Trigger an action by select YoLink devices without reliance on the internet
• Automation – Easily setup scheduled and automatic actions and responses with the YoLink App as well as with 3rd-party integration platforms such as Alexa and IFTTT

Independent System

“YoLink” is a proprietary wireless technology provided by YoSmart. which is based on the Semtech's LoRa wireless technology combined with the YoSmart smart home/buiding protocol, to provide the most advanced smart home/buidling devices solution. Compared to WIFI, Bluetooth, ZigBee, Z-Wave, and other smart home protocols, it has the advantages of low-power consumption, long-distance coverage (wall penetration), and anti-interference. It is the first smart building/home protocol that can be very easily setup and is a very low cost but creates a reliable, robust and more secure IoT network.

No Internet Control

Turn on/off the valve even without internet.

Note: YoLink Valve sold separately!

Whole House Solution

Home Automation - Build "IF THIS THEN THAT" rules between YoLink Water Leak Sensor and YoLink Smart Plug (sold separately) , making life convenient and secure. With YoLink App, you can set smart scenes, automation and YoLink Control between devices and devices, sharing devices with family members and making your house smart. Let's start your own whole house smart home system with YoLink.

5X Long Lasting

Powered by 2*AAA batteries, YoLink Leak Sensor features with 5 years battery life compared to 1 year of other top brands.

Step 1, Download App

1, Download YoLink App from Apple store or Google play

2, Create Account and Login

Requirements:

Smartphone or tablet running iOS 9 or higher, Android 4.4 or higher

Step 2, Add Device

Scan the QR code on YoLink Hub and Water Leak Sensors to add into YoLink App.

You can customize their name, set their room, and add to/remove from “Favorite”.

Step 3, Connect to Internet

Power up the Hub using the supplied power adapter, connect to your Wi-Fi network (or directly to your router, using the included patch cord), and your YoLink Hub will connect to the App.

Step 4, Connect to Cloud

Press "Set" button on Water Leak Sensor once to connect it to YoLink Hub and Cloud.

Product description

The Flume 2 Smart Home Water Monitor is changing the way we consume water by giving you the ability to manage, monitor, and conserve the world's most precious resource. Take control of your water usage and bring quirky facts to the backyard barbecue with real-time water usage monitoring. Flume pinpoints your indoor versus outdoor use with down-to-the-minute, source-specific, water use reports and insights. Powerful water leak detection technology is always onguard alerting you to potentially costly and damaging leaks before they occur. Reduce your water bill and take the guessing game out of your water usage by setting daily, weekly or monthly budgets to save water and money. Not sure where to start? Flume will automatically suggest water use budgets based off of your water data to maximize your savings and reduce waste. Set up and install Flume in the time it takes you to brew your Sunday pot of coffee. No pipe cutting. No wiring. No appointments. No plumbers. With the power of Flume, you will save water, save money and protect your entire property from leaks whether home or away. Get your water data on your favorite smart devices with our iOS and Android apps. Flume is Alexa enabled to bring an extra level of convenience to your household.

• 24/7 SMART WATER LEAK DETECTION: Flume's smart water leak detection technology is always on guard alerting you to water leaks inside the home as well as in your lawn or garden. Gain peace of mind whether you're at home or away with water leak alerts delivered directly to your phone via the Flume Water app. Stop water leaks and protect your home today with Flume.
• REAL-TIME SMART WATER USAGE MONITORING: Dig up the details your standard water bill doesn’t with Flume's real-time smart water monitoring technology. Flume delivers down to the one-hundredth of a gallon water use insight data directly to your smartphone so you're always in the know. Take the guessing game out of your water usage and take control to reduce waste and conserve water.
• REDUCE & MANAGE YOUR WATER BILL: A smart water monitor that pays for itself. Flume allows you to be proactive about managing your water usage by protecting the planet and your pockets. Create daily, weekly or monthly water use budgets that use smart alerts to notify you of potential water leaks and waste. Flume has helped customers save an average of 10-20% per month on their water bill.
• GET TO KNOW YOUR WATER INSIDE AND OUT: Flume pinpoints and displays your indoor versus outdoor use with down to the minute, source-specific, water use reports and insights. Now you can know exactly how much water your sprinkler system uses to create a smarter sprinkler schedule.
• INSTALLS IN MINUTES. NO PLUMBING REQUIRED: The Flume Smart Home Water Monitor is compatible with 95% of homes and installs in minutes. No pipe cutting, no wiring, no appointments. You've got it covered, but we're here if you need us.

User questions & answers

Question:	What's the return policy on Flume 2 if it doesn't work for me
Answer:	JD 5.0 out of 5 starsThis unit can send text messages to phones too! December 30, 2017 Size: 1 Pack|Style: WiFi Email Alert|Package Type: Standard Packaging|Verified Purchase This unit is great!!! I was able to set it up to send notices to cell phones and email. Most wireless phone providers let you send emails that convert to text messages. During the device setup, you can specify several email addresses to receive notifications. I used the format of [email protected] to send text messages to my Verizon wireless phone. So now water leak alerts will be sent as text messages to a couple cell phones plus a couple gmail accounts. I ran several tests and it works great! 23 people found this helpful
Question:	Will work with Google or can it be used with home automation
Answer:	Hello Kelly. After replacing the battery, wet your finger and touch the two sensing contacts. A loud, repetitive series of beeps should sound. If you are not hearing these please call us so that we can trouble shoot with you. We offer toll free support by phone (800 245 9265) during normal business hours Mon. thru Fri. 8:00am to 5:00pm PST. Thank you.
Question:	Does Flume 2 provide any upgrades over the original Flume
Answer:	The Zircon leak detector will float in water easily. It packs a great deal of function into a small microprocessor card. It's a closed box. The box is much lighter than the water it displaces. It floats easily. Peter castaldi
Question:	What is new on 2? Compared to previous version
Answer:	Emails come from Zircon, through Amazon SES. If the service is discontinued, the unit will continue to be an alarm, just no remote notifications. And by then, there may be a replacement.

Product features

Catch Water Leaks & Protect Your Home

Surprises are fun, but not when it comes to leaks. Flume alerts you of abnormal (or accidental) water usage to give you peace of mind whether you’re at home or away.

Down-to-the-Minute Water Use Data

Flume helps you paint a picture of your household’s water use. Dig into the data—down to the one-hundredth of a gallon—and find new ways to reduce waste and manage your water.

Refine Your Sprinkler Schedule

Ever wonder where your water goes? If you use a sprinkler system, most of it is probably outdoors. Flume lets you see your indoor versus outdoor consumption, view your usage history, and build a more efficient irrigation schedule.

Overflowing with Savings

A device that pays for itself. Flume automatically suggests a budget so you can cap your consumption and creates leak notifications to catch costly drips.

What If You Knew Exactly How Much Water You Used?

Knowledge is power. But when it comes to water, many of us don’t know where to start. We designed Flume to change that. Flume puts the power of water consumption and conservation in your hands, protects your home, and improves your relationship with our most precious resource.

The Future of Water Is Digital

You can’t manage what you don’t measure. At Flume, our mission is to empower people and communities to understand how we use water by liberating and digitizing the data behind it.

Eliminate waste. Save water. Together.

Big things are seldom accomplished in silos. We’re bridging the gap between consumers and water providers to fundamentally (and forever) change the way we understand and access water data. Only together can we eliminate waste and preserve our most precious resource.

• Dripping and Leaking Alarm: Besides 2 groups of back water detector probes, each detector also has 1 group of front probes for pipe dripping.
• Wireless and Easy to Use: No wire or setup required, the mini size allow you to put it on any place where the water leak may be happen. With kit "B07QP153GT", you are able to monitor leaks on your phone even you're not at home.
• Adjustable Alarm Audio: Each water leak detector features an 0-100 dB adjustable alarm audio. Loud enough to be heard even if leak happens in basement, press the button to mute the sound when you find the leaking place.
• Low Battery Alert: The water sensor alarm will beep and flash red light when battery is low, or press the button on it to test the battery level.
• IP66 Waterproof: The completely sealed waterproof design allows for extended use in high moisture areas.

User questions & answers

Question:	Do these sensors work with the 3 pack wifi system
Answer:	3" dia - pretty standard for these type of lamps.
Question:	How long do the batteries last before replacement is needed
Answer:	just shy of 3 inches by a fraction of an inch so that is all I can say.
Question:	How to link to alexa? i have enabled the govee in alexa but it won’t find it. i want the alarms to go of on all my alexa’s in my house
Answer:	3 inch base. My light was a hanging wagon wheel and is about 30 years old.
Question:	Do these connect to the h5040 wireless gateway? the gateway is not finding them
Answer:	I don’t have those lamps anymore but as I recall the measurement was from the bottom.

Product features

Govee Water Leak Detector

Water Leak Detector has an ultra-loud 100dB alarm, can be heard even in basement. Press mute button when you find leak (dry probes, then press mute or alarm will sound again after 8s). Has 2 groups of back probes and 1 front probe for pipe dripping. Place it in bathrooms, basements, by water heaters to detect leaks.

Pull Out the Insulation Sheet

Place It On the Detecting Location

Press to Mute When Hearing Alarm

Burst

Leak

Overflow

Product description

How it works



1: Plug the Wifi gateway into socket, pull out the water sensors battery insulating tab.

2: Download ‘Govee Home’ on App Store or Google Play to your cellphone.

3: Open the app and sign up with your email account.

4: Click the icon '+' at the top right corner and select H5040 device.

5: Follow the app prompt to connect your wifi Gateway with your router(not support 5G wifi).

6: Name each sensor like Basements, Kitchen Sinks, Water Heaters and put the water sensors on the detecting location.

7:Get email, Push notifications and alert on your smartphone when leak happened

• Real-time Alerts: Connect the gateway to WiFi, and it will instantly send emails, App notifications & alerts to your phone when water leakage occurs even you're not at home. Water sensors and gateway are paired right out of the box. Note: Doesn't support 5G WiFi.
• Loud Alarm with Mute: If WiFi is not temporarily available, our 100dB alarm is loud enough to be heard. Press the Mute button to silence the alarm when you find the leak.
• Drip and Leak Alerts: Water sensor comes with 2 groups of back water detector probes & 1 group of front probes for pipe dripping detection. Use the App to name each sensor with its location.
• Connects to Multiple Sensors: WiFi connection gateway has a stronger and more stable signal transmission & lets you connect with multiple sensors simultaneously (10 max).
• IP66 Waterproof : The completely sealed IP66 waterproof design allows for extended use in high moisture areas.

User questions & answers

Question:	Can this be setup on alexa as a triggered routine? For example, if sensor is tripped turn off washer machine outlet
Answer:	Like all Ring devices, this is not compatible with Homekit out of the box. However, you can connect it to Homekit using Homebridge running off a computer or Raspberry Pi. See homebridge.io for more detail on that. Ring also promised in June 2016 that they will bring Homekit compatibility to their devices, but 4 years later and it's still not there. So Homebridge is the best option for now.
Question:	What is the maximum range distance for the gateway and sensor
Answer:	No, at this time, you cannot change any of the settings such as temperature set point. The sensor is set from the factory to alert when the temp drops below 40 degrees F. It does not give any alerts for higher temperatures at all. Of course it also sends alerts when the sensors on the underside sense water.
Question:	Can the audible alarm be silenced from the iphone app
Answer:	No, this is not compatible with the ring doorbell.
Question:	Can this be used to detect a tub that has overflowed
Answer:	Two alarms in one unit, it is made to sit on the floor. There are metal contactacts on the bottom to pick up a leak on the floor or flood and also a temperature alarm when it is less than 40F. I have mine on the floor by my sump pump crock. If it is less than 40, you get a warning before it gets cold enough to freeze a pipe.

Product features

Govee WiFi Water Leak Detector

Using the connection between the gateway, water sensors, and Govee Home App, you can monitor any leakages on your phone while you are away from home. There are no annoying wires, which makes monitoring even easier. You can also name each WiFi water sensor according to their location on the App. When a leak occurs, the sensors will not only sound a loud alarm, but email and App notifications will also be sent to your phone. You can clearly know where the leakage happened and deal with it in time

Open the App, Connect to H5040

After downloading 'Govee Home' from the App Store or Google Play to your phone, please open the App and sign up with your email account. Then click the icon '+' at the top right corner and select H5040 device.

Press the Pairing Button for 3 seconds

Press the pairing button for 3 seconds until the red and blue light flash alternately and then input the WiFi password on your phone. Please note any special characters, blank spaces, and so on.

Connect Your WiFi Gateway

Follow the app prompt to connect your WiFi "Govee_Gateway_xxxx" with your router (doesn't support 5G WiFi). Place the water sensors in the detecting location and name each water alert .eg. basement, kitchen. Then you can begin to monitor the water leakage on your phone!

Monitor Water Leakage on Your Phone

After a successful connection, you can place the sensors and start to monitor water leakage on your App. Note: Please ensure the App and your phone settings are set to allow "push" notifications. The gateway will not send push notifications if the leak happens again in 90 seconds.

WiFi Gateway Supports Up to 10 Leak Detectors

Compared with others, our Govee WiFi gateway connection design has a stronger and more stable signal transmission. It works as a bridge to connect your WiFi with multiple water sensors. It receives the water leakage info from the sensors when leaking happens and sends it to the Govee Home App on your phone.

Loud Audible Alarm with Sensitive Sensor Probes

Loud Adjustable Audible Alarm with Sensitive Sensor Probes

Sensitive Sensor Probes: With 2 groups of water detector probes on the back and one group of probes on the front, the water alarm will swiftly notify you about any water pipe dripping.

Loud Adjustable Audible Alarm: Ultra-loud 100 dB alarm is easy to be heard even if leaks occur in your basement. Press the Mute button to silence the alarm when you find the leak.

• Detects as little as 1/32 in. of water to offer an effective early warning system
• Solid-state circuitry is extremely sensitive and reliable
• Loud 110 dB alarm can be heard throughout the house
• Sensor has a 6 ft. wire so it can be extended into a sump pit, or mounted on a wall
• Accommodates the addition of more than 100 ft. of wire (additional 24-Gauge wire not included)

User questions & answers

Question:	what is size of sensor
Answer:	I do not know if these two items are the same. I'm sorry that I cannot be of assistance,
Question:	is it easy to reset
Answer:	According to customer service at Kidde, the FireX FADC reccomended Kidde replacement options are the i4618, the i5000 and the i12060, with the i4618 and i5000 being the preferred models. However other people at Kidde say that practically all Kidde's will replace the FADC, but you may have to swap the wiring harness, pretty simple if you can run a breaker box and a wire nut. I would call the help desk at 1-800-888-6788 to verify your present situation. Make sure you have the model NFO, of course, and the manufacturing date stamped on the back.
Question:	if the battery is low, will it give you some sort of audible/intermitten beep warning (like a smoke alarm
Answer:	It does not.
Question:	How do you splice in more wires to create a dual sensor using the one box? Want to put 1 box and 2 sensors in a tight location
Answer:	Is i4618 interchangeable with Firex 120-1072? Can I attach to the same base?

Product features

30 Years of Dependability

For three decades, The Basement Watchdog High Water Alarm (Model BWD-HWA) has been protecting homes from the mess and expense of water damage.

Place It Anywhere

Put The Basement Watchdog High Water Alarm (Model BWD-HWA) next to a water heater, under a laundry tub, a sink, or anywhere water damage is likely. The alarm includes 6' of wire, which you can extend up to 100', allowing the sensor to be used in hard-to-reach places.

Detects Leaks, Big and Small

All it takes is 1/32" of water to set off a piercing, 110 dB alarm. The problem is detected before a flood occurs or mold can grow. The Basement Watchdog High Water Alarm (Model BWD-HWA) is so sensitive that the moisture from your fingers is enough to set off the alarm.

Small Investment, Big Protection

For a small investment, you get big protection. The Basement Watchdog High Water Alarm (Model BWD-HWA) gives you an early warning system that will save thousands in cleanup and repairs by heading off a drip that started under your sink, a broken fridge water line, or a water heater that sprung a major leak.

• PLACE ANYWHERE LEAKS HAPPEN - Don't let an unnoticed leak damage your home and cost you thousands. The Mindful Design Water Leak Detector can be easily placed in bathrooms, basements, underneath sinks or by water heaters to catch leaks as they happen. Keep your family safe and worry-free!
• LOUD 95DB ALARM - Each detector features an ultra-loud 95db alarm, no wiring or setup required. When water is detected the alarm will sound, alerting you to the problem before disaster strikes.
• COMPACT AND DISCREET - Measuring 3.25" x 3.25" x 1.25", this water alarm's small size allows it be discreetly placed wherever you need it, with multiple color options that will match your ideal placement location.
• DETECTS A VARIETY OF LEAKS - The highly sensitive sensors on each device can detect both pooling and dripping water, as well as high levels of moisture. The sensors can be identified as the two metal prongs embedded in the side of the device.
• REUSE AGAIN AND AGAIN - Don't waste money on disposable alarms! The Mindful Design Water Leak Alarm is made to be reused. Unwrap and install the included battery - once triggered, simply dry it off if wet and change the battery if needed. A low battery alert will let you know when it is time for it to be replaced.

User questions & answers

Question:	Is there any reason not to use lithium batteries with this device
Answer:	They are not intended to fit over glasses but may work with some small and low profile frames. For the majority of prescription glasses, you would probably need something larger such as our VFR (Over The Glasses) model.
Question:	Where are the sensors on this alarm? Can anyone show a photo of the sensor location? Thanks
Answer:	Measure your prescription glasses. Side to side. Top to bottom. Add about 2/16 of clearance to determine which safety glasses will work.. there is an instruction photo to look at if you need additional information
Question:	How long battery last
Answer:	I believe a respirator means having to do with your airway, this is just eye wear safety. Has nothing to do with your respiration.
Question:	Does it sensor water from the bottom
Answer:	Well sir, if you are making a satirical comment on the current discourse in our society, then bravo. If you are serious, then first you will have to assess whether getting eye irritation from drifting gas is really your greatest concern if you participate in any event likely to end with gas and rubber bullets. Industrial goggles are meant to be worn in workplaces where eye damage from splashing liquids are possible. They are vented to allow for comfort and will therefore allow for the intrusion of gasses. Workplaces that are subject to gas hazard require sealed suits with powered, high filtration ventilation. So the answer is either ha ha if you are joking, or "no way in Hell" if you were truly serious.

Product features

Home Protection From All Types of Leaks

This amazing tool detects the presence of many different types of leak issues. Pooling water, dripping water, or even high levels of environmental moisture.

An Alert You CAN'T Miss

A very loud 95Db alarm is featured on each individual detector. The ultra-loud alert will carry throughout your space and notify you at the first instance of liquid on the sensor.

Small and Discreet

The small 3.25" x 3.25" x 1.25" size of this detector means you can tuck it away in any space and still keep the area tidy.

Reuse Easily After the Detector Goes Off

1. Identify and fix the leak you have been alerted to
2. Remove the detector from the area
3. Dry off the detector, paying attention to the sensor areas.
4. Switch out the used battery for a fresh one.
5. Place the sensor in a chosen area for next use.

Place a water leak detector in all the areas you need it most!

This compact and discrete device will fit seamlessly into your home under sinks, in bathrooms, kitchens and all the common places you might need it. Many users also ensure they have one in the below areas:

Product description

The General Tools MMD4E Pin-Style Digital Moisture Meter provides accurate moisture level reading to detect leaks, dampness and moisture in wood, walls, ceiling, carpet and firewood. It is an essential tool for assessing water damage and remediation efforts after flooding from storms, hurricanes, roof leaks or broken pipes to discover hidden water damage in floors, walls and under carpets. By checking suspicious water stains with a moisture tester around the house, you can determine whether the area is wet (a perfect breeding ground for mold) or has long since dried. This water leak detector also is helpful for new home inspections and home restorations, locating roof leaks or simply to ensure firewood is ready to burn. It also ensures the appropriate level of surface dryness before painting, sealing or treating wood or drywall. The moisture meter is easy to use: simply stick the stainless steel pins into the surface of what you are measuring in order to get a read-out. Overall measurement range of 5 to 50% for wood and 1.5 to 33% for building materials. The backlit, large, easy-to-read digits and clearly-designed LED alerts tell you immediately if the moisture content is high, medium or low. Plus, the moisture meter has audible high, medium, low alerts so you will be able to hear the level even if you are in a dark or awkward space where you can’t see the screen. The sturdy, ergonomic shape and rubber side grips allow for comfort even when using for multiple measurements. Every moisture meter also feature a hold function to freeze a reading to read later, auto power off and a low battery indicator. Every package includes extra 0.3 in. (8mm) stainless steel pins, a protective cap that doubles as a calibration checker and a “9V” battery.

SPECIFICATIONS • Measurement ranges: 5 to 50%WME (Wood Moisture Equivalent) for wood, 1.5 to 33% for building materials

• Moisture measurement accuracy/resolution: ±3%/0.1%

• Pin length: 0.3 in. (8mm)

• Wood moisture scales: 5 to 11.9% (low); 12 to 15.9% (medium); 16 to 50% (high)

• Building materials scales: 1.5 to 16.9% (low); 17 to 19.9% (medium); 20 to 33% (high)

• Display size and type: 99.9 count backlit LCD with 0.3 in. (8mm) high digits

• Auto power off: After 3 minutes of inactivity

• Dimensions: 6.0 x 2.6 x 0.8 in. (152 x 66 x 20 mm) • Weight: 3 oz. (86g)

• Power source: "9V" battery (included)

GENERAL TOOLS - THE PRECISE TOOL FOR DOING THE JOB EXACTLY RIGHT. Offering over 1,000 tools, we’re proud to provide tradesmen, craftsmen and DIYers around the world with a broad range of affordable, specific-purpose mechanical hand tools and precision measuring and inspection tools.

For inquiries, please contact our Customer Service Department at 212-431-6100. We strive to provide our customers with 100% satisfaction.

WORK SMARTER, MEASURE BETTER & BE MORE PRODUCTIVE WITH GENERAL TOOLS

• DETECT MOISTURE- Determine the moisture content of wood and other building materials (like drywall) or check water damaged areas to see if moisture is still present
• FIRST STEP IN MOLD PREVENTION - By checking suspicious water stains with a moisture tester around the house, you can determine whether the area is wet (a perfect breeding ground for mold) or has long since dried
• ACCURACY- Stick the stainless steel pins into the surface of what you are measuring in order to get a read-out. Overall measurement range of 5 to 50% for wood and 1. 5 to 33% for building materials as well as low, medium and high moisture tones and colored green, yellow and red LED visual alerts
• EASY TO READ AND USE- Large 0. 3 in. (8mm) high digits in a backlit LCD display for quick and easy viewing plus a hold function to freeze a reading, auto power off and a low battery indicator
• INCLUDES- Extra 0. 3 in. (8mm) stainless steel pins, protective cap that doubles as a calibration checker and a “9V” battery

User questions & answers

Question:	made in USA
Answer:	Nathan, Thanks for the question. The Moisture Range on this Hand Held meter for CORN is 10 - 40%. However, the clear plastic funnel which is provided to assist with consistent filling of the test cell, will not work well on corn over say 25 - 30%. This is due to the lack of flowability in the higher moisture content. I would suggest that you still fill the funnel, but pour the sample back out the large end at just 1 - 2" above the test cell. EVERY TIME and at the same Rate. With this consistency, you would have much greater repeatability between different tests. I would also suggest using the feature to average three readings to allow for some fill variation. Hope that this has help with the operation of the meter. Tom Runyon Seedburo Equipment Co.
Question:	I have a wooden floor that is swelling little bit. I know I had a small water leak. Can this tool help me to check if there is moisture underneath
Answer:	Not on the standard instrument, but YES, Long Grain and Medium Grain Rough Rice have recently been added to the available Calibration list. These would need to be substituted on the list, for example, Oats and Milo could come off and we add in the Long Grain & Medium Grain Rough Rice. Just let us know at the time you place your order and we will make this substitution free of charge. Seedburo Equipment Co.
Question:	Can I use this product to rule out a plumbing leak under my concrete bathroom floor. The outer bathroom wall is concrete & paint is bubbling
Answer:	Es el mismo equipo, la unica diferencia es que el GACMINI2500 es mas preciso.
Question:	accuracy
Answer:	Thank you for your question. No, the GACMINI testers do not test frozen grains, only the GAC2500UGMA or GAC2500AGRI have the capability of reading this much lower temperature and compensating for this in the calibration. You can view a list of the available calibrations for the MINI testers at the following website: http://cal.dickey-john.com/calibrations.aspx Please let us know if you have any other questions - Kathy at Seedburo Equipment Company

Product features

Water Damage is the First Sign of Mold

Finding moisture is the first step in early mold prevention. High levels of moisture that go untreated are the main cause for harmful mold growth in the home.

With the MMD4E moisture meter, use the pin sensors to find the moisture content in your wood or drywall. This will help you know if you need to dry the existing materials or replace with brand new ones.

Quickly determine what level of remediation is needed to keep your family safe with the MMD4E moisture meter by General Tools!

• LOW-COST, LOUD AND EFFECTIVE water leak alarm designed to help mitigate damage and avoid the associated liabilities and legal exposure to landlords and management companies caused by water leaks.
• IMPORTANT TOOL to warn apartment dwellers, condo owners, managers and landlords of leak conditions so that they can be fixed before they become much costlier problems.
• NO BATTERIES REQUIRED. Lasts up to 3 years.
• SIMPLE INSTALLATION. Just place it and forget it. If water is present, a 110 dB alarm will sound.
• PERFECT for water heaters, laundry areas, under sinks, next to toilets, and near any suspected leak locations.

User questions & answers

Question:	Why is this item listed for €71 on Amazon.de, but only $22 here on com
Answer:	JD 5.0 out of 5 starsThis unit can send text messages to phones too! December 30, 2017 Size: 1 Pack|Style: WiFi Email Alert|Package Type: Standard Packaging|Verified Purchase This unit is great!!! I was able to set it up to send notices to cell phones and email. Most wireless phone providers let you send emails that convert to text messages. During the device setup, you can specify several email addresses to receive notifications. I used the format of [email protected] to send text messages to my Verizon wireless phone. So now water leak alerts will be sent as text messages to a couple cell phones plus a couple gmail accounts. I ran several tests and it works great! 23 people found this helpful
Question:	whats the level of the water before going off
Answer:	Hello Kelly. After replacing the battery, wet your finger and touch the two sensing contacts. A loud, repetitive series of beeps should sound. If you are not hearing these please call us so that we can trouble shoot with you. We offer toll free support by phone (800 245 9265) during normal business hours Mon. thru Fri. 8:00am to 5:00pm PST. Thank you.
Question:	Can you replace the batteries? Or are they “one” time use once the batteries die
Answer:	The Zircon leak detector will float in water easily. It packs a great deal of function into a small microprocessor card. It's a closed box. The box is much lighter than the water it displaces. It floats easily. Peter castaldi
Question:	Is this a one time use only
Answer:	Emails come from Zircon, through Amazon SES. If the service is discontinued, the unit will continue to be an alarm, just no remote notifications. And by then, there may be a replacement.

Product description

In the U.S., water damage is the 2nd most frequently filed insurance claim and has accounted for more than $5 billion of claims each year in recent years. Property damage and monetary loss aside, a water-damaged property could also pose great health risks to its inhabitants, a truly nightmare scenario for homeowners. Thanks to the Instapark IN07A automatic water leakage alarm, a simple, inexpensive yet effective device, you now have a solution to minimize the risk of water damage and avoid its unpleasant aftermath.



Powered by a single 9V alkaline battery (included), the IN07A features a main alarm unit with a 130 dB siren connected together with a water detection sensor by a 44” long wire. When properly placed on the floor or any flat surface area to the monitored, the sensor will automatically detect any presence of water and trigger the main unit alarm to go off at 130 dB to alert the occupant to take immediate actions. Suitable locations to place the sensor include under-the-sink cabinet in a kitchen or bathroom, near a water heater, a sump pump, a toilet, a washer, a humidifier, an AC unit, or ice-making refrigerator. For added convenience, a bottom plate is included to help secure the sensor in place and lower the sensitivity if so desired. The main alarm is easily mountable as high as 44” above the floor, on a flat surface with either its built-in suction cup or included double-sided adhesive foam tape.



Specifications:



Power source: 9V x 1 (included)

Wire length: 44 inches

Dimensions: 2 ¾ X 2 ½ X 1 ¼ inches (main alarm unit)

Weight: 2.4 oz (without battery)

Battery life: 2 years minimum

Siren sound level: 130 dB

Minimum detectable water depth: 1/32 inches



What’s in the box:



IN07A water alarm, 3 of each

Bottom plate

Double-side adhesive foam tape pad

User instruction

Warranty registration

• 24/7 365 days automatic water leakage alarm is triggered when leakage or flooding is detected, a low-cost, simple, and effective device prevents property damage, monetary loss, health risks caused by water damage
• Powerful 130-dB alarm travels up to 100 yards, from end-zone to end-zone
• Advanced and sophisticated solid state circuitry ensures long-term sensitive and reliable operation
• Easy to remove, easy to clean double-sided adhesive foam tape pad included and built-in suction cup for easy attachment to an appliance
• 44-inch long wire extends far and beyond

User questions & answers

Question:	How to turn off the alarm? Is there a switch to turn off the sound
Answer:	22 USD because it ships from the US so it costs extra to ship it to .de
Question:	What gauge of wire is the cable. I will need to extend it about 20 ft. and would like to use the same gauge wire not bigger or smaller
Answer:	It will go off if you set it on a damp cloth, or your dampened finger. It does get louder the more water it detects.
Question:	Is it a constant, steady alarm, or does it "chirp/beep" repeatedly
Answer:	The batteries are not replaceable. An expiration date is printed on the device. Last years purchase says replace 3-2020.
Question:	what size battery do these take
Answer:	The product is NOT a one-time use product. If it sounds, just life the Flood Buzz out of the puddle, dry off the bottom and place to monitor for leaks again. This product is very simple to use.

• Dripping and Leaking Alarm: Besides 2 groups of back water detector probes, each detector also has 1 group of front probes for pipe dripping.
• Wireless and Easy to Use: No wire or setup required, the mini size allow you to put it on any place where the water leak may be happen. With kit "B07QP153GT", you are able to monitor leaks on your phone even you're not at home.
• Adjustable Alarm Audio: Each water leak detector features an 0-100 dB adjustable alarm audio. Loud enough to be heard even if leak happens in basement, press the button to mute the sound when you find the leaking place.
• Low Battery Alert: The water sensor alarm will beep and flash red light when battery is low, or press the button on it to test the battery level.
• IP66 Waterproof: The completely sealed waterproof design allows for extended use in high moisture areas.

User questions & answers

Question:	Is it a one time use only? Can it be dried and used again
Answer:	I would think that a 9 Volt lithium would be safer than an alkaline. These water detectors are supposed to signal low battery life. But you have to hear it and in fact it has to signal. The extra money for the lithium is worth it. There is no reason not to use lithium.
Question:	Installed model h5040 gateway and sensor model h5054. works great. however, can't pair additional model 5054 devices. what is the problem
Answer:	Hi PF, Thank you for your interest in our water leak detector. The sensing contacts are two silver lines that curve around one side and end under the detector, allowing it to sense water at any level. You can see them in our images if you click in and zoom. I hope this helps. Have a good day! Best, Content Specialist Mindful Design
Question:	Does this detector work by itself
Answer:	I have owned my only 1 week. It’s a 9 volt battery and my guess depends on the quality of battery and how often it is triggered or alarm sounding. I would guess that you should test it regularly and replace it when the low battery alarm sounds or 1 year, whichever is shortest.
Question:	How long the batteries last
Answer:	There are 2 small metal nodes that you can see on the outside in the picture. When moisture connects the 2 nodes the alarm sounds. I test these devices with a moistened finger, not much water at all. Very high humidity can trigger them as well, that is, humidity above atmospheric norm.

Product features

Govee Water Leak Detector

Water Leak Detector has an ultra-loud 100dB alarm, can be heard even in basement. Press mute button when you find leak (dry probes, then press mute or alarm will sound again after 8s). Has 2 groups of back probes and 1 front probe for pipe dripping. Place it in bathrooms, basements, by water heaters to detect leaks.

Pull Out the Insulation Sheet

Place It On the Detecting Location

Press to Mute When Hearing Alarm

Burst

Leak

Overflow