14 best tools supply carbon monoxide detectors

Product description

The ET110 CO Detector is an easy-to-use meter that detects and measures concentration levels of carbon monoxide (ppm) and temperature (Fahrenheit/Celsius), making it the perfect choice for HVAC professionals. Features backlit LCD screen, warning indicator light, audible and visual alarms and multiple function buttons. Includes carrying pouch and 4xAAA batteries. Carbon Monoxide Tester detects and measures CO gas concentration. Backlit display with CO measurements from 0 - 1000 ppm. Carbon Monoxide Meter with audible and visual alarms. Auto-power off after 20 minutes of no usage helps conserve battery life. Includes carrying pouch and 4xAAA batteries. Meter is NOT intended for use as personal protection equipment. For more than 160 years, Klein Tools has manufactured premium-quality, professional-grade hand tools that deliver the performance, durability and precision needed to get the job done right. Our family of engineers, workers and craftsman continue to put six generations of expertise into every tool we create by using only the highest quality materials, superior workmanship, and keeping manufacturing as close to home as we can. Klein isn't just the name of our company, it's also our family name. And since we're an American company that's family-owned and family-run, you know you can count on us to be here tomorrow. Klein Tools doesn't just make great products, we make great products that stand up to the demands of the professionals who use them every day ... Since 1857.

• Easy-to-use CO meter detects and measures concentration levels of carbon monoxide gas
• Portable CO detector with user protection and short-term exposure limit (STEL) alarm
• Low level alarm (35 ppm) and high level alarm (200 ppm)
• Audible and visual alarms
• Backlit display with CO measurements (0 to 1000 ppm) and temperature (Farenheit and Celcius)

User questions & answers

Question:	Accuracy spec(s
Answer:	Hi， The dielectric material of the KMR400 cable is Physical Foam Polyethylene. The medium material of UHF connector is PTFE (Teflon).
Question:	Could this be used to check co2 in the coolant system in a car to check for a blown head gasket
Answer:	Hello friend, when charging the battery, the power LED light is on red, after fully charged the LED light will go out, thanks.
Question:	Is the case included
Answer:	Hello friend, yes this will work for that well, as the 5.5mm diameter tiny endoscope camera probe will help you look inside the walls, with the adjustable LED Lights and 1080P HD resolution it can also help you identify any animals within, thanks.
Question:	I would like to use this to measure Co levels in customer warehouses where they run propane forklifts would this be a good tool for that
Answer:	Hi friend Glad to help you. KZ2000 is Industrial Endoscope not Microscope, so sorry that it can't tell the mold, but you can use it to see the back of the drywall if If there are holes in the drywall. Best Wishes KZYEE TEAM

Product features

Carbon Monoxide Meter

The ET110 is an easy-to-use meter that detects and measures concentration levels of carbon monoxide (ppm) and temperature (Fahrenheit/Celsius), making it the perfect choice for HVAC professionals. Features backlit LCD screen, warning indicator light, audible and visual alarms and multiple function buttons. Includes carrying pouch and 4xAAA batteries.

Product description

Plug-In carbon monoxide alarm with battery backup.

Protect your family from the dangers of carbon monoxide (CO) exposure with the Kidde KN-COPP-3 Nighthawk Plug-In Carbon Monoxide Alarm with Battery Backup and Digital Display. The Nighthawk is an easy-to-install unit that provides reliable protection against the dangers of CO. It features a digital display that shows CO levels in parts per million allowing you to see if, how, and when levels change.

Plug-in unit with battery backup and digital display that shows CO level Level button displays the peak CO level recorded by the alarm since it was last reset Loud alarm pattern sounds when unit detects elevated CO levels Direct-plug, 6-foot power cord, and table top mounting options. Five-year limited warranty

This discreet alarm is designed to fit into any standard A/C outlet in your house. View larger.

The easy-read digital display updates every 15 seconds to indicate any abrupt changes or alarming trends in CO levels. View larger.

Advanced Technology in an Easy-to-Install, Plug-In Design

Designed for home use, the Kidde KN-COPP-3 Nighthawk is a UL-listed, A/C-powered, plug-in CO alarm that utilizes sophisticated electronic components and sensor technology to protect you and your family from the dangers of CO. It plugs directly into a standard A/C outlet and includes a 9-volt battery backup that provides continuous monitoring of CO levels--even during power outages.

About Carbon Monoxide: The Silent Killer

The leading cause of accidental poisoning deaths in North America, carbon monoxide (CO) is often referred to as the silent killer because it's odorless, tasteless, and invisible. Carbon monoxide poisoning can come about via a number of sources, including everyday items and appliances in your home or office. And because symptoms of CO poisoning mimic the flu or other common illnesses it can often go undiagnosed.

Audible Alarm Pattern Alerts you to Elevated CO Levels

When placed on every level of your home, alarms like the KN-COPP-3 Nighthawk can help protect everyone in the house from CO exposure by giving you an unmistakable signal when levels have reached an unhealthy point. If unhealthy levels are detected, the alarm will emit four quick audible beats every five seconds until either levels decrease or the reset button is pressed.

Easy-to-Read Digital Display Shows CO Levels

The KN-COPP-3 Nighthawk is unique among traditional CO alarms because of its digital display. This display clearly shows levels of CO that the unit has detected and stored-- from 30 to 999 ppm--and it updates every 15 seconds to indicate any abrupt changes or alarming trends. The display also shows the peak CO level recorded by the alarm since it was last reset or unplugged.

LED Shows Sensor Status

With the KN-COPP-3 Nighthawk, you never have to wonder if the sensor is functioning properly. A blinking dot in the lower right-hand corner of the display denotes normal operation, so you can trust that it's working. In addition, you can test alarm function by pressing the test/reset button at any time to verify that the horn and electric circuitry are operating properly.

Convenient Mounting Options

The KN-COPP-3 Nighthawk has a low-profile design that makes it suitable for any room in your home. The detector can be plugged into any standard A/C outlet; it's plug can be snapped into the back of the unit and can be rotated so the alarm remains vertical, independent of whether the electrical socket is mounted vertically or horizontally. In addition, the alarm comes with a 6-foot extension cord, so the unit can be plugged into the wall outlet and then placed on a table or shelf. For the most thorough protection, place an alarm on every level of your home.

The UL-listed Kidde KN-COPP-3 Nighthawk has a seven-year life and is backed by a five-year limited warranty.

About Kidde: A UTC Fire and Security Brand

Renowned for global leadership in fire detection and suppression, Kidde provides solutions ranging from portable fire extinguishers to advanced industrial controls such as flame detection and explosion suppression systems. Kidde is a UTC Fire and Security brand, with a history that's rich with innovations, from the patent of the Chubb Detector Lock in 1818 to the development of the world's first wireless networked smoke detectors in 2004.

What's in the Box

Kidde KN-COPP-3 Nighthawk CO Alarm, 9-volt battery, mounting hardware, and installation guide.

Keep your family safe by placing alarms and extinguishers in each area of the house, and by having a fire escape plan. Click here for a detailed image.

From the Manufacturer

The leading cause of accidental poisoning deaths in North America, Carbon Monoxide is odorless, tasteless and invisible, it's a silent killer. Kidde CO alarms include the most accurate sensing technology available, the patented Nighthawk electrochemical sensor. This alarm can be mounted three ways: plug directly into AC receptacle, mount on tabletop using 8 foot power cord, or wall-mount. The digital readout continuously displays carbon monoxide levels from 30-999 parts per million. This unit has a loud, 85-decibel alarm that sounds when CO reaches dangerous levels. One of the features of this product is peak level memory, which means this unit will recall highest level of CO present since previous reset. Install at least one CO alarm on every floor and in sleeping areas. Make sure CO alarms are at least 15 feet away from cooking or heating appliances to prevent false alarms. Replace CO alarms every 5 to 7 years to benefit from the latest technology upgrades.

• Peak level button – Displays the peak CO level recorded by the alarm since it was last reset or unplugged
• Test button functions – Tests the unit for proper operation and resets the carbon monoxide alarm
• LED operation – Blinking dot in lower right corner of display denotes normal operation
• Ten years after the initial power up, this alarm will “beep” two times every 30 seconds to indicate that it is time to replace the alarm.
• Note: This CO alarm is not battery operated. However, these alarms are equipped with 9 volt battery backup – the 9 volt battery is to supply short term back-up during a power outage.
• Power source: 120VAC. Temperature range-40˚F (4.4˚C) to 100˚F (37.8˚C). Humidity range-5%-95% relative humidity (RH)

Product features

Easy to Read Display

This plug-in CO alarm is designed with a clear, visible readout that will accurately record the levels of carbon monoxide present so that you can quickly know if an area of your home is at risk. It measures CO levels between 30 and 999PPM, and the display will also indicate if the battery needs to be replaced.

Unbeatable Protection

Always protect your family and home by making sure you are prepared for any emergency or hazard with the Kidde plug-in carbon monoxide detector. This CO meter uses an electrochemical sensor and features a clear digital display screen to monitor and record any CO levels in any room of your house. This sensitive and clear detector will leave you confident that you are protected against carbon monoxide.

Peak Level Memory Feature

Displays the peak CO level recorded by the alarm since it was last reset or unplugged

Product description

The Kidde KN-COPP-B-LPM battery operated CO alarm provides continuous monitoring of CO levels, even during power outages when many CO incidents occur. The digital display feature allows for easy viewing of carbon monoxide levels from 30-999 PPM (parts per million). The KN-COPP-B-LPM will also detect and istore concentration CO levels as low as 11 and up to 999 PPM with its peak level memory display. This alarm, includes a slide-out battery door that gives immediate access to the batteries and a safety feature that makes it difficult to close the cover without the batteries being installed. It has a 10-year life and a 10-year limited warranty.

Kidde’s KN-COPP-LPM battery-operated carbon monoxide alarm with digital display helps to provide your home with extensive protection against the dangerous threat posed by the odorless and colorless gas. With an increasing number of state and local governments passing legislation requiring CO detectors in homes, it’s never been a better time to safeguard your family against carbon monoxide exposure.

KN-COPP-LPM Battery-Operated Carbon Monoxide Alarm At a Glance: Digital display allows for easy monitoring of CO levels Battery operation provides best protection during power outages Peak level memory displays the highest CO concentration since last reset Dimensions: 4.5 inches by 2.75 inches by 1.5 inches; weighs .66 pounds with batteries Five-year limited warranty

Kidde's KN-COPP-LPM carbon monoxide detector is a free-standing unit, adding flexibility to placement around your home. View larger

Features

The KN-COPP-LPM is an essential device to help warn you and your family of dangerous carbon monoxide levels in your home. This alarm measures the exposure to carbon monoxide over time; it is designed to sound at 85 decibels at 10 feet when it detects 70 ppm (parts per million) of CO for 60 to 240 minutes, 150 ppm for 10 to 50 minutes, or 400 ppm for 4 to 15 minutes. The easily visible digital display indicates the level of CO that the unit is sensing, and it updates the status every 15 seconds for timely and accurate readings. Its free-standing design allows for attachment to a wall or placement on a counter or nightstand for convenient and comprehensive protection. The KN-COPP-LPM also includes a slide-out battery door that provides immediate access to the power source as well as a battery safeguard that makes it difficult to close the cover without batteries installed. An LED lighting system on the unit signals power levels and sourcing: the green LED will flash once every 30 seconds to indicate the alarm is operating properly when power is present, and the red LED will pulse to indicate carbon monoxide has been detected until the device is reset or the CO threat is eliminated. This device has an expected 7-year lifespan and comes equipped with a five-year manufacturer’s limited warranty.

What's in the Box

One Kidde KN-COPP-LPM battery-operated carbon monoxide alarm with digital display and three AA batteries.

The KN-COPP-LPM features an easy-to-read digital display in front and an easy-access door to the batteries in back. (Click each to enlarge)

From the Manufacturer

Kidde KN-COPP-B-LPM Battery-Operated Carbon Monoxide Alarm w/ Digital Display - Digital screen with large display is easy to read - Peak-level memory displays the highest CO concentration measured since the last reset - Meets the all UL requirements - Battery operated with three AA batteries included - Backed by a five-year warranty

The new Kidde KN-COPP--LPM carbon monoxide alarm is the only battery-operated alarm that includes a digital display feature. This key feature adds an advanced level of protection that you have come to expect in a Kidde manufactured product. The battery operated CO alarm includes multiple mounting options, allowing installation on a wall or tabletop. This alarm has been carefully designed and tested to detect CO concentration in a residential environment. It provides continuous monitoring of CO levels, even during power outages when many CO incidents occur. The digital display feature allows for easy viewing of carbon monoxide levels from 30-999 PPM (parts per million). The KN-COPP-LPM will also detect and store concentration CO levels as low as 11 and up to 999 PPM with its peak level memory display. This alarm includes a snap-on cover that gives immediate access to the batteries and a safety feature that makes it difficult to close the cover without the batteries being installed. Updates digital reading every 15 seconds, allowing you to see if levels change. The peak level memory displays the highest CO concentration measured since the last reset. The test/reset button tests CO alarm circuit operation and allows you to immediately silence the alarm. A low battery signal alerts users when the batteries need to be replaced. Includes informative LEDs: green LED for normal operation, red LED for alarm. The alarm alerts user to replace CO alarm after 7 years of operation.

Sensor: Electrochemical.

• Digital Display - Displays the level of carbon monoxide the unit is sensing. Shows CO level in PPM (parts per million). Updates digital reading every 15 seconds, allowing you to see if levels change. Peak Level Memory displays the highest CO concentration measured since the last reset
• Battery Operated - Provides the best protection during power outages. Battery safeguard makes it difficult to close the cover without batteries in the unit. Low battery signal alerts user when the batteries need to be replaced. Slide-out battery door cover gives immediate access to batteries
• Test/Reset Button - Tests unit’s electronic circuitry & horn and resets the unit during alarm. Tests CO alarm circuit operation and allows you to immediately silence the alarm
• LED's - Green LED for normal operation, Red LED for alarm. Temperature range 40˚F (4.4˚C) to 100˚F (37.8˚C). Sensor: Electrochemical
• Provides peace of mind against the silent killer and a digital display

User questions & answers

Question:	is it a plug in
Answer:	Light turns off on mine as well once i unplug but i just plugged it back in a tested it and it started beeping and went back to red
Question:	Can the alarm be run with rechargeable NiMH batteries
Answer:	The alarm never went off in ours and the battery was charged when we got it. Its a 10 yr battery so I think your product is defective.
Question:	how is it installed
Answer:	Not sure, but my suggestion would be to replace the battery. What good is a battery backup if your battery is low?
Question:	How is the unit mounted? Should it be near the ceiling or near the floor
Answer:	The plug also can be removed from the unit in case you want to mount the device on the wall or stand it on a table or night stand.

Product features

Digital Display

Displays the level of carbon monoxide the unit is sensing. The unit updates this reading every 15 seconds

Unmatched Protection

Be prepared for a hazard or emergency in your home, and ensure the safety of your family and loved ones with the Kidde carbon monoxide alarm. This CO detector uses advanced electrochemical sensors and features a digital display screen to accurately and quickly inform you of any CO levels in your home.

Protection Everywhere

This is a battery-operated, free-standing carbon monoxide alarm that can be placed on a counter, nightstand or tabletop, or it can be taken with while traveling or camping so that you can always be sure you are in a safe environment. Additionally, if it is your preference, it includes the hardware necessary for installation on walls.

Product description

The Kidde KN-COEG-3 AC powered, plug-in CO and explosive gas alarm protect you and your family from two deadly threats. The KN-COEG-3 includes 9V battery backup that provides protection during a power outage, when AC-only units cannot provide protection. By pressing the Peak Level Button you can see the peak CO level recorded by the alarm since it was last reset or unplugged. The continuous digital display shows you the level of carbon monoxide (if any) the unit is sensing as well as if gas is present. The gas sensor is a metal oxide sensor designed to detect natural gas (methane) or propane. Temperature range- 40 degree Fahrenheit to 100 degree Fahrenheit.

Protect your family from the dangers of carbon monoxide (CO), methane, and propane exposure with the Kidde KN-COEG-3 Nighthawk Plug-In Carbon Monoxide and Explosive Gas Alarm. The Nighthawk is an easy-to-install unit that provides reliable protection against the dangers of CO and explosive gas. The digital display shows if gas is present indicates CO levels in parts per million, allowing you to see if, how, and when levels change.

Advanced Technology in an Easy-to-Install, Plug-In Design

Designed for home use, the Kidde KN-COEG-3 Nighthawk is a UL-listed, A/C-powered, plug-in alarm that utilizes sophisticated electronic components and sensor technology to protect you and your family from the dangers of CO, methane, and propane exposure. It plugs directly into a standard A/C outlet and includes a 9-volt battery backup that provides continuous monitoring--even during power outages.

The Dangers of Carbon Monoxide, Methane, and Propane Exposure

The leading cause of accidental poisoning deaths in North America, carbon monoxide (CO) is often referred to as the silent killer because it's odorless, tasteless, and invisible. Carbon monoxide poisoning can come about via a number of sources, including everyday items and appliances in your home or office. And because symptoms of CO poisoning mimic the flu or other common illnesses it can often go undiagnosed.

Likewise, methane and propane gases are commonly used in homes for cooking, heating, and water heating. Although it happens rarely, gas leaks can sometimes occur inside the home, increasing the risk of fire or explosion.

Audible Alarm Pattern Alerts you to Elevated CO and Gas Levels

When placed on every level of your home, alarms like the KN-COEG-3 Nighthawk can help protect everyone in the house by giving you an unmistakable signal when gas levels have reached an unhealthy point. If unhealthy levels of CO are detected, the alarm will emit four quick audible beeps every five seconds until either levels decrease or the reset button is pressed. If methane gas or propane gas is detected, the alarm will emit beeps every other second with "GAS" shown in the display.

Easy-to-Read Digital Display Shows CO Levels

The KN-COEG-3 Nighthawk is preferred among traditional CO and explosive gas alarms because of its digital display. This display clearly shows levels of CO that the unit has detected and stored-- from 30 to 999 ppm--and it updates every 15 seconds to indicate any abrupt changes or alarming trends. The display also shows the peak CO level recorded by the alarm since it was last reset or unplugged. The continuous display also shows if gas is present.

LED Shows Sensor Status

With the KN-COEG-3 Nighthawk, you never have to wonder if the sensor is functioning properly. A blinking dot in the lower right-hand corner of the display denotes normal operation, so you can trust that it's working. In addition, you can test alarm function by pressing the test/reset button at any time to verify that the horn and electric circuitry are operating properly.

Convenient Mounting Options

The KN-COEG-3 Nighthawk has a low-profile design that makes it suitable for any room in your home. The detector can be plugged into any standard A/C outlet; it's plug can be snapped into the back of the unit and can be rotated so the alarm remains vertical, independent of whether the electrical socket is mounted vertically or horizontally. In addition, the alarm comes with a 6-foot extension cord, so the unit can be plugged into the wall outlet and then placed on a table or shelf. For the most thorough protection, place an alarm on every level of your home.

The UL-listed Kidde KN-COEG-3 Nighthawk has a seven-year life and is backed by a five-year limited warranty.

About Kidde: A UTC Fire and Security Brand

Renowned for global leadership in fire detection and suppression, Kidde provides solutions ranging from portable fire extinguishers to advanced industrial controls such as flame detection and explosion suppression systems. Kidde is a UTC Fire and Security brand, with a history that's rich with innovations, from the patent of the Chubb Detector Lock in 1818 to the development of the world's first wireless networked smoke detectors in 2004.

What's in the Box

Kidde KN-COEG-3 Nighthawk Carbon Monoxide and Explosive Gas Alarm, 9-volt battery, mounting hardware, and installation guide.

From the Manufacturer

The leading cause of accidental poisoning deaths in North America, Carbon Monoxide is odorless, tasteless and invisible. It is a silent killer. Kidde CO alarms include the most accurate sensing technology available, the patented Nighthawk electrochemical sensor. This unit is an AC powered, plug-in CO and explosive gas alarm that protects you and your family from two deadly threats. The 900-0113 includes 9V battery back up that provides protection during a power outage, when AC only units can not provide protection. By pressing the Peak Level Button you can see the peak CO level recorded by the alarm since it was last reset or unplugged. The continuous digital display shows you the level of carbon monoxide, if any. The unit is sensing as well as if gas is present. The gas sensor is a metal oxide sensor designed to detect natural gas , methane or propane. Install at least one CO alarm on every floor and in sleeping areas. Make sure CO alarms are at least 15 feet away from cooking or heating appliances to prevent false alarms. Replace CO alarms every 5 to 7 years to benefit from the latest technology upgrades.

• Protects you and your family from two deadly threats: Carbon monoxide and explosive gas.
• Sounder alarm – The KN-COEG-3 offers a loud 85-decibel pulsing alarm that will sound to alert you to a potential problem.
• Digital display - Displays the level of carbon monoxide the unit is sensing.
• Peak level memory - Recalls the highest CO concentration detected
• Test/reset button - Tests unit’s electronic circuitry operation and allows you to immediately silence the alarm
• Two alarms in one detects carbon monoxide and explosive gas
• Three convenient mounting options

User questions & answers

Question:	What is the sound level I need one for basement and need to hear on ground floor
Answer:	Dear cutomer, excuse that this prodcut Y301 can't detect hydrogen gas, it's mainly sensitive for methane and propane. thank you very much
Question:	is this an explosive gas and carbon monoxide detector? it only says "carbon monoxide detector" on the actual product
Answer:	Don't worry, it's normal, the large moisture change can affect the sensor performance, and may lead to false alarm, but the data on display only switch to 1,2 or 3, but won;t trigger the voice and light alarm. If the data become 5 or more than 5, voice and light alarm will be triggered. Thank you very much and best regards.
Question:	No manual included. Do I just plug it in and test it? What does it display if gas is detected? Thanks fellow Amazoners
Answer:	HI Niran, it's sensitive to methane and propane. We think it can't used to monitor and detect CO. thank you vey much
Question:	I smell natural gas in my house, and am wondering if that is the same as explosive gas? Will it detect natural gas
Answer:	Dear Karen, temporarily the Y301 doesn't get UL certification, it passed CE, FCC, EMC and RoHs. We are applying US ETL certification which is equivalent to UL certification. Thank you very much and best regards.

Product features

Plug-In Explosive Gas and Carbon Monoxide Detector with Battery Backup

The Kidde KN-COEG-3 AC powered, plug-in CO and explosive gas alarm protects you and your family from 2 deadly threats. The KN-COEG-3 includes 9-Volt battery back up that provides protection during a power outage, when AC-only units can not provide protection. By pressing the Peak Level Button you can see the peak CO level recorded by the alarm since it was last reset or unplugged. The continuous digital display shows you the level of carbon monoxide (if any) the unit is sensing as well as if gas is present. The gas sensor is a metal oxide sensor designed to detect natural gas (methane) or propane.

Carbon monoxide and gas detector plugs directly into wall outlet

Digital display updates CO level in PPM every 15 seconds

Loud 85 dBA pulsing alarm that will sound to alert you to a potential problem

Product description

Kidde 21025778 Carbon Monoxide Alarm Battery. Made from quality materials for durability and performance. Designed for quick and simple installation.

• 2 AA battery backup
• Low battery hushes
• Event memory
• Loud 85 decibel alarm
• Low battery signal

User questions & answers

Question:	Would this device work in a 6' x 6' hunting blind with a Mr. Heater heating unit
Answer:	Not for sure but wife read that rhey can fluxiate between 0-3 with no problems mine does it also
Question:	your cob b lcm coc allarm is 15$ 6 is 99$ . why does quantity coct more
Answer:	When I used the digital gas detector to test it worked fine.
Question:	How far apart are the mounting holes
Answer:	There are two possible causes. The unit was not zeroed out upon activation or you do have a very low level of gas in your home atmosphere, with the first being my best guess. Unplug and move and re-check the reading. If this does not resolve the issue send it back for a new one. Mine has worked well for 6 months so far.
Question:	Why is the 2 pack more than 2 times the price of the single detector
Answer:	I returned these detectors. They don't have any information printed on the case - no manufacturer name, no instructions, no UL approved indicator, etc. These were made in China which is usually okay but I am not comfortable in relying on them to protect my family. I will be researching further and looking for better detectors that can be trusted.

Product features

Battery Operated Carbon Monoxide Alarm

The Kidde KN-COB-B-LPM Battery-Operated Carbon Monoxide Alarm is intended for continuous monitoring of carbon monoxide levels. The alarm features a piezoelectric horn that is rated at 85 dB at 10 ft. The alarm is battery operated for uninterrupted monitoring, even during power outages, and runs on 2 AA batteries, which are included.

Battery-operated carbon monoxide detector; no hardwiring required

Alarm will sound when dangerous levels of CO are detected

Test/reset button tests the unit for proper operation and resets the alarm

Product description

The First Alert SCO5CN Combination Smoke and Carbon Monoxide Alarm features dual sensors to detect both smoke and carbon monoxide in a single device. A photoelectric sensor detects the smoke most often produced by smoldering fires, and minimizes false alarms from cooking smoke or shower steam. Additionally, the advanced electrochemical CO sensor detects carbon monoxide leaks from multiple sources, such as faulty fuel burning appliances, blocked chimneys, and generators running inside or too close to homes. A loud, 85 decibel siren alerts you to the threat; unique alarm sounds and indicator lights on its face distinguish a smoke warning from a carbon monoxide warning. This carbon monoxide and smoke detector is battery operated, so you don't need an electrician for installation. Requiring just two AA batteries and featuring an easy access battery compartment for quick changes, this smoke and carbon monoxide detector has a single button that allows you to silence a false alarm or test the unit.

Carbon monoxide (CO) is the leading cause of accidental poisoning deaths in America, yet many people don't know they are suffering from CO poisoning until its too late. Since symptoms of CO poisoning are like the flu, you might not even know you're in danger at first. That's why a carbon monoxide alarm is an excellent way to protect your family. It can detect the CO you can't see, smell or taste in the air.

The First Alert SCO5CN carbon monoxide and smoke alarm uses an electrochemical carbon monoxide sensor-the most accurate technology available. The alarm uses photoelectric smoke sensing technology which is environmentally friendlier and which reduces nuisance alarms, making it ideal for cooking areas. It is also great for sensing slow smoldering fires quickly. The permanent sensors last the lifetime of the alarm. The test/silence button both silences a non-threatening alarm or low battery warning and allows you to test the unit's functionality. A low battery signal alerts you to replace the battery and end-of-life alarm of three chirps alerts you to replace the unit. Two AA batteries are included. 5-year limited warranty. UL listed. Not available for sale in Massachusetts.--Bree Norlander

What's in the Box

One combination carbon monoxide and smoke alarm, two AA batteries, and user's manual. This does not contain voice feature.

• Keep your family safe with this battery operated smoke and carbon monoxide alarm; Battery powered alarms provide continuous monitoring of CO levels, even if there's a power failure
• Features an electrochemical carbon monoxide sensing technology as well as a photoelectric sensor that detects the larger particles of a smoldering fire
• Indicator lights on the face of the unit display the presence of smoke or carbon monoxide, while an 85 decibel siren provides a clear, loud warning upon detection
• Battery operated unit installs quickly and easily without an electrician. Low battery signal mute, quiets low battery signal for up to 8 hours
• Simple to use, with a single test/silence button; EZ access battery drawer allows you to change battery without removing alarm from ceiling
• 7 year limited warranty; Equipped with end of life signal chirp, so you know when it’s time to replace the unit for safety; All first alert alarms are rigorously tested to meet UL standards
• It can ship within the US except New York
• First Alert has been the most trusted brand in home safety since launching the first residential smoke alarm in 1958 (Based on a First Alert Brand Trust Survey in February 2018)

User questions & answers

Question:	pack is $30, 2 pack is $90. Why is a two pack so much? I thought the idea was to incentivize more product at a lower cost. This is halarious
Answer:	I no longer live in the apartment where I replaced the old smoke alarm, but you will love this one. It's so nice to flip the battery holder down and not have to remove the battery from the unit.
Question:	Advice on false alarms? Goes off every week or so. It's in our kitchen/living room, but goes off even when we are not cooking. Goes 1 min then stops
Answer:	No
Question:	I have these througout my house and rental unit. Installed them about 7 years ago and many malfunctioning. Any durability mprovments since 7 yrs ago
Answer:	The instructions that come with the unit duplicate what I have read from several Fire Department sources: you can place your unit on the ceiling, but AT LEAST 4 inches (10cm) from the wall. If you want to mount it on the wall, mount it MORE THAN 4 inches (10cm) BELOW the ceiling, but NO LOWER than12 inches (30cm) below the ceiling. It has to be high enough up the wall to "smell" the smoke, but that 4 x 4 inch (10cm x 10cm) area where the wall meets the ceiling can sometimes harbor a "dead zone" of still air where the smoke would NOT reach the detector quickly enough during a fire to warn you in time. Thus, do NOT mount your detectors too close to where the wall meets the ceiling.
Question:	How long do batteries last
Answer:	Ionization type. I actually looked at at manual to be certain.

Product description

Quick and accurate measurements of ambient CO values with the testo 317-3 The testo 317-3 ambient CO detector is ideal for HVAC contractor who need a reliable tool for precise carbon monoxide detection. The flue gas meter is equipped with an exclusive self check that eliminates the need for zeroing in a fresh air environment. The extremely sensitive sensor is able to function anytime with a range up to 1,999 ppm. Both visual and audible alarms with an adjustable high and low threshold simplify servicing and maintenance of heating systems during inspections of homes and commercial buildings. The compact design of the HVAC servicing instrument in combination with the included belt clip soft case enable a convenient hands-free application. Technical Data: Ambient CO measuring range: 0 to +1999 ppm Ambient CO measurement accuracy: ±3 ppm (0 to +29 ppm/ ±10 % (+30 to +1999 ppm) Operating temperature: 23° to 113 °F / -5 to +45 °C Battery type: 2 AAA batteries Battery life: 150 h (with beeper switched off) Storage temperature: -4° to 113 °F / -20 to +45 °C Delivery Scope: ✓ testo 317-3 ambient CO stick ✓ Protective soft case with belt clip ✓ Hand strap ✓ Earbuds ✓ 2 AA batteries ✓ Instruction manual

• Efficient: The flue gas meter achieves the accurate readings needed for furnace and boiler service and maintenance, as well as weatherization audits and home inspections
• Easy operation: Automatic zeroing, a range of up to 1,999 ppm and an exclusive self-check provide quick and worry-free CO measurements - without the need for test gas
• Reliable: Visual and audible alarms with an programmable high and low alarm threshold warn the user effectively about potentially harmful CO concentrations
• Compact: Thanks to the compact design, quick start and belt clip soft case, the lightweight carbon monoxide detector stick offers an easy and hands-free application
• Accessories: The batterie powered flue gas detector comes with a protective soft case and clip belt, along with a hand strap and earbuds for loud working environments

User questions & answers

Question:	Does this meter come with a case
Answer:	100% USA Manufacturer
Question:	Hello, I wonder if the equipment comes with factory calibration certificate. Thanks for your quick response
Answer:	CR123A, I use rechargeable batteries most the time, but certainly not a requirement. I’ve found that my local gun shop usually has the cheapest priced batteries when I need to buy some.
Question:	Does this model have an earphone jack
Answer:	1” ring... had one in a Larue mount and it was for 1” light body
Question:	How is this an improvement over a CO detector (e.g. - Kidde C3010D ) with PPM display and peak level tracking which costs much less
Answer:	The 6P is the original model of the series that uses an older Xenon gas bulb with lumen out put at 65 as standard or 120 lumens as optional. The newer model 6PX is equipped with a high output LED that outputs either 15 lumens in low and 600 lumens in high with a push of the tail button. As i have both over the years the 6PX is the obvious choice. Hope this helps

Product features

The testo 317-3: The pocket-sized CO measuring instrument and gas spillage detector

Quickly and accurately measure ambient CO values on the job site with the testo 317-3. When detecting the presence of carbon monoxide (CO) in ambient air, it warns the user of potentially harmful CO concentrations are reached.

Compact and Convenient

The lightweight testo 317-3 can be taken to any job site and be operated in hands-free mode. The programmable settings for both visual and audible alarms, ambient CO testing during furnace and boiler service and maintenance, weatherization audits, or home inspections has never been easier.

Ready for Operation

The adjustable testo 317-3 is immediately ready for action since there is no zeroing phase. Due to an exclusive self-test mode, it is always ensured that the CO sensor is functioning without the need for test gas.

Technical Specifications

Ambient CO Measuement Specifications

• Measuring range: 0 to +1999 ppm
• Accuracy: ±3 ppm (0 to +29 ppm) / ±10% (+30 to +1999 ppm)
• Resolution: 1 ppm

Product description

Kidde Monoxide Alarm.

From the Manufacturer

The leading cause of accidental poisoning deaths in North America, Carbon Monoxide is odorless, tasteless and invisible. It is a silent killer. Kidde CO alarms include the most accurate sensing technology available, the patented Nighthawk electrochemical sensor. This unit combines a Carbon Monoxide and Ionization Smoke Alarm, providing two important safety devices in a single unit. This alarm includes a voice warning system that announces "Fire, Carbon Monoxide, Low Battery or Smart Hush Activation." The voice alarm eliminates any confusion and clearly warns you and your family of a smoke or carbon monoxide danger, or if your battery is in need of replacement. This unit is hardwired and will work with many interconnected systems. This combination alarm has battery backup, protecting you and your family even during a power outage when many incidences occur. Install at least one CO alarm on every floor and in sleeping areas. Make sure CO and Smoke alarms are at least 15 feet away from cooking or heating appliances to prevent false alarms. Replace CO alarms every 5 to 7 years to benefit from the latest technology upgrades. Ionization sensing alarms may detect invisible fire particles associated with fast flaming fires sooner than Photoelectric alarms. Studies show both types will effectively detect either type of fire. For optimal protection, install both smoke alarm technologies in your home.

• Smart Interconnect-Interconnects up to 24 Kidde devices (of which 18 can be initiating), Battery Backup (2-AA batteries included)-Provides protection during power outages. Front Loading Battery Door-Replace the backup batteries without disconnecting from mounting bracket
• Humidity range: 10%-95% relative humidity, non-condensing. Battery Lockout System-The battery door will not close unless the batteries are properly installed, Alarm Tamper Resist-Helps deter from tampering and theft, Adjustable Mounting Bracket-Makes installation fast and easy. Works with existing smoke and combination smoke and CO mounting brackets.
• Peak Level Memory-Announces “CARBON MONOXIDE PREVIOUSLY DETECTED” if alarm has detected a CO level of 100ppm or higher since it was last reset, HushTM Feature-Silences nuisance alarms for approximately 9 minutes. (Smoke must be present before HushTM is activated)
• Ionization Sensor Technology-Ideal for detecting fast flaming and other types of fires, est Button Functions: – Tests the unit for proper operation - Peak Level memory - Resets the Carbon Monoxide alarm
• Green LED-Illuminates to indicate the unit is receiving AC power. Flashes once every 60 seconds to indicate battery only mode. Flashes once per second during alarm to indicate initiating alarm. Flashes once every 16 seconds to indicate smoke or CO previously detected. Flashes every 2 seconds while the alarm is in HUSHTM mode
• Red LED-When a dangerous level of smoke or carbon monoxide is detected the red LED will flash. If the unit malfunctions, the red LED will flash and the unit will chirp every 30 seconds
• Talking alarm announces the hazard type detected, helping to speed up reaction time

Product features

Immediate Protection for Your Home

When fires are a very common type of emergency a family can face in their home, it’s important to do everything you can to be prepared. The Kidde KN-COSM-IBA interconnected combination smoke and CO alarm combines an ionization smoke sensor, which can detect smaller, less visible fire particles, with an electrochemical sensor, which detects CO, into a single, superior device. This interconnectable smoke and carbon monoxide detector provides constant, reliable protection to your home.

Install in Minutes

Complete with an adjustable mounting bracket, mounting hardware, a quick-connecting wire harness, two AA batteries and a user’s manual, this smoke and carbon monoxide alarm is easily set up in any room of your home for instant protection. It has a battery safeguard so it can’t accidentally be mounted without batteries. It meets the safety standards set by Underwriters Laboratories (UL) so that you can be confident of its quality.

Voice and Alarm Notifications

A verbal warning system reduces confusion and helps get occupants to safety.

Alarm warnings include:

> Fire: The red LED will flash with three long beeps, followed by the message “Fire! Fire!”

> Carbon Monoxide: Four short alarm beeps followed by the message “Warning! Carbon Monoxide!”

Alarms will repeat until hazard is cleared.

Product description

The First Alert SC7010B Hardwired Combination Photoelectric Smoke and Carbon Monoxide Alarm with Battery Backup delivers both smoke and carbon monoxide detection in a single unit. Equipped with a photoelectric sensor and Optipath 360 technology, the alarm detects smoke produced by smoldering fires while keeping false alarms to a minimum. The unit also features an advanced electrochemical sensor that detects carbon monoxide leaks from multiple sources such as faulty fuel-burning appliances and blocked chimneys. If a threat is detected, the alarm emits a spread spectrum horn tone that is designed to be heard by people with age-related hearing loss. Made to be hardwired directly into the electrical system of your home or facility, this 120-volt hardwired smoke detector features a backup battery that helps keep the alarm functioning even in the event of a power outage. The alarm's perfect mount system allows for easy installation and alignment, while its low battery latch gives a visual indication if the battery is running low. And thanks to the convenient test/silence button, it is easy to check alarm function and mute false alarms. Faster turnarounds on job sites with the easy-to-install, most-trusted alarms in home safety

From the Manufacturer

The BRK Model No. SC7010B is a wire-in, 120V AC 60Hz single and/or multiple station combination smoke and carbon monoxide alarm specifically designed for residential and institutional applications including sleeping rooms of hospitals, hotels, motels, dormitories and other multi-family dwellings as defined in standard NFPA 101. Model SC7010B complies with UL217 and UL2034, CSFM, NFPA 72 and NFPA 720, HUD, FHA and other agencies that model their codes after the above agencies. It meets building codes where AC/DC photoelectric smoke and carbon monoxide alarms are required. The BRK SC7010B is a state-of-the-art hardwired with battery backup smoke/CO combo alarm that features a photoelectric smoke sensing chamber, an electrochemical CO sensor and an End of Life signal. The Spread Spectrum Horn Tone has a lower and varying frequency that makes it easier for the elderly with normal age related hearing loss to hear the horn. This alarm features two latching features and two silence features. Alarm Latch: Easily identifies initiating alarm even after alarm condition has subsided. Low Battery Latch: Identifies which unit is in low battery condition by blinking the green power light. Low Battery Silence: Temporarily silence the low battery chirp for up to eight hours. Alarm Silence: Silence alarm for several minutes. Other features include an 85dB horn, single button test/silence, an easy access battery drawer and dust cover. OptiPath 360 Technology: Exclusive patented technology provides 360 degrees of direct access to the smoke sensor. Two locking features are provided to prevent battery theft and/or theft of the unit. Connection to AC power is made with a Quick-Connect wiring harness. Installation is quick, easy and cost effective.

• Keep your family safe with this hardwired smoke and carbon monoxide alarm; The battery backup means constant monitoring, even if there's a power failure
• Features electrochemical Carbon Monoxide sensing technology as well as a photoelectric sensor equipped with Optipath 360 technology that enhances detection with 360 degree access and reliably detects smoke from smoldering fires
• In case of danger, the loud spread spectrum alarm is designed to be heard easily by even those with some hearing issues
• Can connect to other compatible BRK or First Alert detectors, to ensure all alarms will sound when threat is detected
• 10 year limited warranty; Equipped with end of life signal chirp, so you know when it's time to replace the unit for your safety
• Rigorously tested to meet UL standards
• Faster turnarounds on job sites with the easy-to-install, most-trusted alarms in home safety
• First Alert has been the most trusted brand in home safety since launching the first residential smoke alarm in 1958 (Based on a First Alert Brand Trust Survey in February 2018)

User questions & answers

Question:	How often do these need to be replaced because of "end of life" warning? I feel like we are constantly replacing them and don't know what's normal
Answer:	The installation instructions for this unit notes that it can be wall mounted, "If allowed by local building codes," (check with your Buildings Department - since several codes are in use in various localities) - with the proviso that the top of the mounted unit must be between "4 inches and 8 inches" below the wall-ceiling meeting, to avoid dead air space.
Question:	Will this First Alert unit plug into my existing BRK 3-wire pigtail connector, or do I have to buy a BRK unit? Thank you
Answer:	Off-white.
Question:	Does anyone know if this smoke/carbon monoxide alarm is compatible with a house full of First Alert 9120Bs (smoke only)? Want them all connected
Answer:	Nor sure about that particular standard, but box states that it complies with ANSI/UL Standards, California state fire marshal, FHA, HUD, and National Fire Protection Association.
Question:	I have Model No. SC7010BV. Is the same replacement without the "V
Answer:	The beep is effective. It always seems to start in the middle of the night. I twist the unit off the ceiling and do a battery swap and have it back on the ceiling in less than a minute, craw back into bed before really waking up. It's not a pain to replace the batteries, it's very easy. Simply slide the tray out and pop new ones in. The batteries fit snuggly in the compartment and there are tabs that allow you to push the batteries out by applying pressure with your thumbs from the back side. There is an optional screw hole to make the battery compartment tamper resistant. This prevents people from easily taking the batteries to power their remote controls or whatever. When fire marshals inspect fire related deaths it's not uncommon to find the smoke and fire detectors had no batteries installed. This simple, optional, screw might seem like "a pain" to some people, but it's an easy way to save your life. This is a great unit. I have 6 in my house and I highly recommend them to everyone.

Product description

Kidde 21026043 battery-operated (not hardwired) combination smoke/carbon monoxide alarm with voice warning KN-COSM-BA. Interconnects - No.

• Voice Alarm – Announces the hazard type detected thereby helping to speed up the correct reaction to the hazard detected. Alarm announces “Fire” when a smoke or fire hazard is detected and announces “Warning, Carbon Monoxide” when a CO hazard is detected
• Combined Carbon Monoxide and Smoke Alarm – A single unit can be installed where previously, two were needed. Reduces installation time and helps to keep home decor attractive.
• Audio alarm: 85 dB at 10 feet. Test/Reset Button and LEDs – Tests alarm circuitry and triggers the voice announcement. Flashing green for normal operation and flashing red for alarm condition. Humidity Range: 10 percent to 95 percent relative humidity non-condensing
• Battery - Provides protection even during power outages when many fire and carbon monoxide incidents occur. The unit warns of a low battery condition by announcing “low battery” and by initiating an alarm chirp and activating a flashing red LED. The battery door will not close unless the batteries are properly installed. Note: The date printed on the item is manufacturing date, not the expiration date. Refer to the PDF attached below in the technical specification for manual.
• Voice Announcements - Hush Feature temporarily silences nuisance alarms with “Hush Mode Activated” and “Hush Mode Cancelled” voice announcement. If the alarm had detected a CO level of 100 ppm or higher, the unit will announce “Carbon Monoxide Previously Detected” to warn of the CO incident, when the Test/ Reset button is pressed. Temperature range: 40˚F (4.4˚C) to 100˚F (37.8˚C). Voltage (volts): 4.5

User questions & answers

Question:	How frequently do we need to change the batteries
Answer:	They don’t connect or require wiring, place them wherever needed
Question:	Can this unit be used to replace the hard wired smoke detector in my home
Answer:	I received the energizer E522 max 9 V new batteries
Question:	Need to replace a kn-cosm-b. is the mount the same on the much newer kn-cosm-ba
Answer:	I don't understand your question. All batteries will burn if you put them in a fire.
Question:	Does the smoke detector have both photoelectric and ionization sensors
Answer:	Malaysia

Product features

Easy Access Front-loading Battery Door

Easily replace the 2 AA batteries without disconnecting from mounting bracket. This alarm model also includes a safety feature in the battery safeguard – The battery door will not close unless the batteries are properly installed.

Giving You Peace Of Mind

There’s nothing more important than keeping your family and home safe, and when fires are a very common type of emergency a homeowner can face, you want to be prepared. The Kidde KN-COSM-BA combination Fire Detector and Carbon Monoxide Detector pairs two life saving devices into one unit. It uses an ionization sensor and electrochemical sensor to monitor your home for potential hazards, so you will always feel safe and confident.

Comprehensive Alerts

Voice alarms along with chirps indicate the hazard that has been detected for fast response. Alarms include:

> Fire: The red LED will flash along with three long beeps, followed by the message “Fire!”

> Carbon Monoxide: Four short beeps followed by the message “Warning! Carbon Monoxide!”

Product description

The ET120 is it the perfect choice for HVAC professionals. It is an easy-to-use tester that provides audible and visual alarms in the presence of methane, propane and other combustible gases at concentrations as low as 50 ppm. It features two levels of sensitivity depending on users' needs: High (approximately 50 to 1000 ppm) and Low (approximately 1,000 to 10,000 ppm). Gas Leak Detector with 18-Inch flexible gooseneck. Combustible gas detection range: 50 to 10000 ppm. Combustible gas detection range: 50 to 10000 ppm. Over-molded body for comfortable grip. Auto power-off after 10 minutes of non-usage conserves battery life. Includes detector, 4xAAA batteries, instruction manual and storage pouch. For more than 160 years, Klein Tools has manufactured premium-quality, professional-grade hand tools that deliver the performance, durability and precision needed to get the job done right. Our family of engineers, workers and craftsman continue to put six generations of expertise into every tool we create by using only the highest quality materials, superior workmanship, and keeping manufacturing as close to home as we can. Klein isn't just the name of our company, it's also our family name. And since we're an American company that's family-owned and family-run, you know you can count on us to be here tomorrow. Klein Tools doesn't just make great products, we make great products that stand up to the demands of the professionals who use them every day ... Since 1857.

• Detection range: Approximately 50 to 10,000 ppm* (*based on Methane)
• Two levels of sensitivity: High (approximately 50 to 1000 ppm) and Low (approximately 1000 to 10,000 ppm)
• Five red LED's (visual) and 85dB audible alerts that increase with gas concentration
• Automatic zero-point calibration at power-up (lights will flash during self-calibration; this does not indicate the presence of gas)
• 18-Inch flexible gooseneck expands sensor's reach; clips onto meter for storage

User questions & answers

Question:	Will this detect a co2 leak
Answer:	this gas detector very easy to use and it works precisely
Question:	Can this detect r22 and 410a
Answer:	After warm-up and the yellow light goes out adjust the side dial to adjust the sensitivity until the first, bottom LED is at the threshold of lighting up and the ticking just starts to sound. If the alarm sounds after warm up the knob is rotated too far + rotate - until the first LED is lit or about to be lit. If the first level red light is lit and the alarm is not sounding, it's not detecting any gas.
Question:	Will this detect hydrogen
Answer:	HI,Usually the products can work for at least 2 to 3 years , if sensor is not sensetive enough , we recommend you to replace the sensor at that time . You can send Email to contact us, feedback your address and we will arrange our after service team to ship sensors to you for replacement. We can use DHL to ship , or ask our US local team to ship from your side . Anyway, if you have any concerns or question , just contact us and we will reply in 24 hours and feedback corresponding solutions . Thank you choose our products and service .
Question:	Does this detect hydrogen sulfide
Answer:	Turn it on let it warm up a just dial till lights go out and ticking starts the ticking means the sensor is sampling the air if it detects methane it will alarm the more lights the higher the gas concentration

Product features

Combustible Gas Leak Detector

The ET120 is an easy-to-use tester that provides audible and visual alarms in the presence of methane, propane and other combustible gases at concentrations as low as 50 ppm, making it the perfect choice for HVAC professionals.

Product description

The CO71A monitors, records and alerts you to the presence of dangerous carbon monoxide in ambient air. The visual display constantly indicates precise quantities while the audible and visual alarms respond to various threshold levels.

From the Manufacturer

UEi Test Instruments has over 50 years’ experience designing and manufacturing a broad range of award-winning, industry-leading Test and Measurement Tools. Professionals recognize the UEi brand for quality and innovative features designed to solve real-world problems. UEi backs its products with dedicated technical support, service and repair teams.

• Preset alarms 3-color warning light Audible alert
• Low battery indicator
• CO detection to 999 ppm
• Preset alarms 3-color warning light Audible alert
• CO detection to 999 ppm

User questions & answers

Question:	What kind of batteries does it used
Answer:	Dear Christopher D. Jones, yes, this instrument comes with a Soft case with belt clip.
Question:	Can you get a case or does it come with one
Answer:	Dear Talia,Good day and thank you for your recent inquiry.Testo 0632 3173 comes with Certificate of Conformity.This unit usually does not get any type of Nist calibration because Nist is usually more expensive than the unit itself.It is only supposed to be used for ambient not any type of combustion forms. The manufacturer does not recommend full calibration as this unit is not meant for that. It is meant for ambient measurements only. The normal Nist Calibration is about $200.00."For more detailed information please contact the manufacturer's technical support at (800)227-0729.If you have any further questions please don't hesitate to contact us. It would be a pleasure to help in any way we can.Sincerely,Yana-- Your Mega Depot® Customer Service Team
Question:	can this meter be used in automotive applications and if so is it accurate enough to measure co in automotive cooling system
Answer:	Hello, yes, this item includes earphone jack, and earbuds for loud environments.
Question:	Is it accurate enough to mesure outdoor CO levels (<10 ppm
Answer:	The Testo is a personal monitor which can be used to detect CO levels down to 1ppm. It is not meant to be used as a CO Alarm that is to be installed in one's home. The Kidde CO alarm, on the other hand, does meet UL standards to be used as an installed alarm. However, UL standards require CO alarms to sound at much high levels of CO than the personal Testo CO detector would. The Kidde will only display CO levels of 30ppm or greater.

Product features

UEi’s Carbon Monoxide Detector CO71A

The CO71A inconspicuously works to monitor, record, and alert contractors working in commercial and residential environments with potentially high CO concentrations. This hand-held detector has a simplified interface with a visual display that constantly indicates precise quantities of CO while the audible and visual alarms respond to various CO threshold levels set by ASHRAE and OSHA standards. The indication light on the top meter illuminates and changes color based on the CO concentration detected.

Professional Features

Reads ambient CO from 0 ~ 999 Parts per million (PPM) – well past the danger levels.

NO auto shut off for continuous monitoring.

Backlit display for dark environments.

MAX capture to display highest readings detected.

Auto zero

Safety Audible and Visual Alarms

Graduating LED Light warns of changing CO concentration levels.

2 to 9 ppm displays GREEN LED warning.

10 to 34 PPM displays AMBER LED warning.

35 PPM or higher displays RED LED warning with Audible Alarm.

Quality CO Sensor

Long life CO sensor has a five year expected life span and reads in 1 part per million accuracy.

This sensor is designed for ambient testing only and not designed for flue gas or warm air stream testing applications.

3-year limited warranty

The CO71A is warranted to be free from defects in materials and workmanship for a period of three years from the date of purchase. UEi recommends the CO71A sensor be calibrated annually at a certified service location to maintain accuracy.

Carbon Monoxide

Always have a reliable CO detector when working in confined spaces.

Best to have both a visible and audible alarms

CO moves in the air current so allow time to stabilize readings

Have a device that reads CO in PPM (Parts per million)

Check common areas around fireplaces, grills, registers and vents

CO Applications

Monitor CO levels for contractors working in environments with potentially high CO concentrations.

Validate effectiveness of State-mandated CO alarms

Confirm implementation of government standards for CO exposure.

Ideal for first responders investigating, inspecting or maintaining equipment using carbon-based fuels.

Product description

The First Alert CO710 Carbon Monoxide Alarm with 10-Year Battery and Digital Temperature Display detects dangerous carbon monoxide for up to 10 years. This carbon monoxide detector uses an electrochemical carbon monoxide sensor, the most accurate CO detection technology available, to detect the CO you can't see, smell, or taste in the air. A built-in 10-year lithium battery means you never need to worry about changing batteries during the lifetime of the alarm. This stylish CO monitor is designed to sit on top of a dresser or tabletop, and it has a backlit digital display that clearly shows the ambient temperature, as well as current and peak CO concentrations. An 85-decibel horn sounds if carbon monoxide levels are too high, and a test/silence button silences the alarm and allows you to test its functionality.

• Keep your family safe with this easy to use digital-display, 10-Year battery operated carbon monoxide alarm; Battery powered alarms provide continuous monitoring of CO levels, even if there's a power failure
• Easy-to-read backlit digital display shows temperature and CO concentration; Peak Level feature displays the highest concentration of carbon monoxide measured
• Built-in 10-year lithium battery offers continuous protection for the life of the carbon monoxide detector
• A loud 85-decibel alarm sounds when CO levels reach dangerous levels
• 10-year limited warranty; Equipped with end-of-life signal chirp, so you know when it’s time to replace the unit for safety
• All first alert CO alarms are rigorously tested to meet UL standards
• First Alert has been the most trusted brand in home safety since launching the first residential smoke alarm in 1958 (Based on a First Alert Brand Trust Survey in February 2018)

User questions & answers

Question:	can i fly with this for overseas use
Answer:	No. This does not sync with those.
Question:	These CO2 detectors have a shelf life, how do we get these with the full life of the unit? Some are already past the exp. date
Answer:	Yes. Batteries are included.
Question:	Will this give your exact co level even if it's normal or only if the co is dangerous
Answer:	This PL-259 Jumper Cable is usually used for HAM & CB Radio, Antenna Analyzer, Dummy Load, SWR Meter. If it is used for WIFI modem, you need to check if your device has SO239 connector.
Question:	is this good for travel
Answer:	Loss in a co-ax is a function of frequency. Assuming we are talking about the 12” patches. At 1ft of RG58 run 14MHz(20m band) it has a 0.013dB loss, at 440MHz (70cm band) it has 0.08dB loss... which yeah if you add everything up it could be rather substantial. As a patch cable though. If you want to try patching with a LMR400UF, that’s all on you, but you can’t beat the flexibility of RG58 If you’re going to attempt to run say 100ft of RG58 on 70cm yeah... 90% of your power goes to de-icing the feed line. It all depends on your application :D 73 de KN4GEI

Product description

The Kidde i12010SCO is a hardwired combination smoke and carbon monoxide alarm that contains a 10-year, sealed battery backup. This alarm uses breakthrough technology to offer a fast response to real fires, including smoldering and fast-flaming, as well as protect you from carbon monoxide and dramatically reduce the chance of nuisance alarms. The Intelligent sensor technology combines the detection capabilities of an ionization smoke sensor – which is more likely to detect smaller, less visible fire particles, like those produced by flaming fires – with that of an electrochemical sensor, which is used to detect CO. Since carbon monoxide is present in all fires, having both detection chambers work together in one alarm is a breakthrough in the fire safety industry. When either sensor notices a potential hazard, it will communicate with the other. Depending on what is detected, the alarm will adjust its smoke sensitivity in order to better discriminate between a real hazard and a false one. This constant communication enhances the alarm’s overall performance in all fires, and significantly reduces the potential for a nuisance alarm. Peak Level Memory-Announces “CARBON MONOXIDE PREVIOUSLY DETECTED” if alarm has detected CO level of 100ppm or higher since it was last reset. Humidity Range - 10%-85% non-condensing relative humidity (RH).

• Provides protection from two hazards - Fire and CO in one unit with 10-year sealed lithium battery backup.
• Sealed-in lithium battery backup - No battery replacement required over the 10 year life of the alarm. Eliminates worry about removal or unauthorized deactivation of alarm.
• Voice warning system - Verbally announces “Fire” or “Warning, Carbon monoxide” to help distinguish between threats. Audio alarm: 85 dB at 10 feet
• Ionization sensing technology - Ideal for detecting fast flaming and other types of fires. Temperature Range: 40 degree F (4.4 degree C) to 100 degree F (37.8 degree C)
• Hush feature - Temporarily silences nuisance alarms for approximately 9 minutes and will not allow hush mode unless the unit is in alarm mode. Interconnects - Up to 24 Kidde devices (of which 18 can be initiating).Flashes once every 60 seconds to indicate battery only mode
• Compatible with Kidde, FireX, code one and sentinel products