16 best root grapple

Product description

A solar cover is a great way to capture the sun’s heat and take full advantage of this natural resource to heat your above-ground or in-ground swimming pool. The benefits of owning a solar cover are plentiful and serve a multitude of purposes.

Cover Benefits:

• Take advantage of the sun's FREE HEAT resulting in a warmer water
• Made from durable resin material
• Constructed with thousands of small air bubbles to capture and transmit heat from the sun to your swimming pool
• Blocks undesired dirt and debris from your pool
• Helps prevent up to 95% of pool water evaporation, thus reducing heat loss at night or on cloudy days.
• Helps keep your pool free from dirt and debris

Cover Details:

• Size: 16’ x 32’
• Cover Style: Blue
• Shape: Rectangle
• Series: 1200

NOTE: Please remember that the bubbles on the cover face DOWN into the water!

Warranty 6 Years/ 2 Years Full of Limited Warranty Coverage against manufacturer's defects

**Disclaimer** Please note that solar covers may come with 2" - 11" of overlap to allow trimming to fit your pool - Trimming will NOT void the manufacturer’s warranty.

• ATTRACTIVE BLUE DESIGN - Sun2Solar solar blankets are made from a film of thousands of tiny bubbles, which work together to collect and retain heat both at night and on those chilly days. The blue color provides an appealing look while also using the sun’s rays to help warm your swimming pool.
• MINIMIZE WATER EVAPORATION - The use of a solar cover helps in preventing up to 95% of pool water evaporation. When not enjoying a refreshing swim, keeping your pool covered lessens the vast amount of water lost into the environment. Fill up your swimming pool less and enjoy it more!
• JUMP INTO WARMTH - Show friends and family your bravery by jumping in without the standard toe dip. Enter the swimming pool confidently knowing the Sun2Solar solar cover has kept the water warm just for you. It’s easy to put on and take off allowing more time for showing off.
• HEAT RETENTION - After everyone has called it a day with wrinkled fingers from too much fun in the sun, make sure to place this solar cover back atop the water. Don’t lose all of that warmth generated throughout the day when the sun sets. Assure your pool’s temperature does not drop too much by protecting it at night through use of a solar blanket.
• TRIM TO FIT - Your pool may be uniquely shaped and getting the right fit is as easy as finding a marker and sharp pair of scissors. Have the bubbles facing down to the water and trace a line on the cover showing where you should cut off the additional material. Do so confidently knowing this won’t affect the manufacturer’s warranty---they understand.

User questions & answers

Question:	Shipping dimensions 20x40 12 mil and weight
Answer:	I think he/she is asking what are the dimensions and weight of the box that the cover is shipped in. I would also like to know the answer.
Question:	What is this material made of? Is it safe to use in a pond
Answer:	It will be safe for at least a year. I have had the cover for exactly 13 months and the cover is starting to fall apart and is leaving small blue bubble debris in my pool. If you have fish in the pond, I would be concerned that the debris could harm the fish if they tried to eat it.
Question:	Is there a warranty on this solar cover
Answer:	They claim there is but when we had an issue with all of the bubbles falling off and clogging our filter leading a brand new pump to burn out they claimed the bubbles separating from the cover isn’t under warranty! We had the cover 10 months and our pool pump was just about a year old...we had put in a new pool. DO NOT BUY THIS COVER
Question:	Does any color work better than the other
Answer:	Hands down clear is the better cover for solar gain. Yhe Department of Energy say the following. "Outdoor pools gain heat from the sun, absorbing 75%–85% of the solar energy striking the pool surface. This is an important contribution to the pool's heating needs. A pool cover will decrease the solar gain contribution to some extent, depending on what type you use. A transparent bubble cover may reduce pool solar energy absorption by 5%–15%. A completely opaque cover will reduce it by 20%–40%. You need to consider this when selecting a pool cover."

Product features

BUBBLES DOWN

Get the best results from using your solar cover by placing the bubble-side of the blanket facing downwards towards your water. This takes advantage of the free heat produced by the sun while more optimally retaining heat within your swimming pool.

FREE HEAT

Transmit UV rays into free heat for your swimming pool with thousands of small air bubbles built into this blanket. The air bubbles capture and transmit heat from the sun to your swimming pool for a more enjoyable swim!

PROTECT YOUR POOL

Stop any unwanted dirt and debris from entering your swimming pool with the Sun2Solar solar cover made from durable resin material. This material not only protects but also helps prevent up to 95% of your pool water from evaporating.

Product description

A solar cover is a great way to capture the sun’s heat and take full advantage of this natural resource to heat your above-ground or in-ground swimming pool. The benefits of owning a solar cover are plentiful and serve a multitude of purposes.

Cover Benefits:

• Take advantage of the sun's FREE HEAT resulting in a warmer water
• Made from durable resin material
• Constructed with thousands of small air bubbles to capture and transmit heat from the sun to your swimming pool
• Blocks undesired dirt and debris from your pool
• Helps prevent up to 95% of pool water evaporation, thus reducing heat loss at night or on cloudy days.
• Helps keep your pool free from dirt and debris

Cover Details:

• Size: 16’ x 32’
• Cover Style: Clear
• Shape: Rectangle
• Mil: 16

NOTE: Please remember that the bubbles on the cover face DOWN into the water!

Warranty 10 Years/ 3 Years Full of Limited Warranty Coverage against manufacturer's defects

**Disclaimer** Please note that solar covers may come with 2" - 11" of overlap to allow trimming to fit your pool - Trimming will NOT void the manufacturer’s warranty.

• SAVE ON HEATING COSTS - Sun2Solar clear solar blankets are made from a film of thousands of tiny bubbles, which work together to collect and retain heat in your pool at night and on those chilly days. The clear color allows the sun’s UV rays to penetrate deeper into your swimming pool for warmer water temperatures. Pay less and swim more.
• MINIMIZE WATER EVAPORATION - The use of a solar cover helps in preventing up to 95% of pool water evaporation. When not enjoying a refreshing swim, keeping your pool covered lessens the vast amount of water lost into the environment. Fill up your swimming pool less and enjoy it more!
• HEAT RETENTION - After everyone has called it a day with wrinkled fingers from too much fun in the sun, make sure to place this solar cover back atop the water. Don’t lose all of that warmth generated throughout the day when the sun sets. Assure your pool’s temperature does not drop too much by protecting it at night through use of a solar blanket.
• JUMP INTO WARMTH - Show friends and family your bravery by jumping in without the standard toe dip. Enter the swimming pool confidently knowing the Sun2Solar solar cover has kept the water warm just for you. It’s easy to put on and take off allowing more time for showing off.
• TRIM TO FIT - Your pool may be uniquely shaped and getting the right fit is as easy as finding a marker and sharp pair of scissors. Have the bubbles facing down to the water and trace a line on the cover showing where you should cut off the additional material. Do so confidently knowing this won’t affect the manufacturer’s warranty---they understand.

User questions & answers

Question:	Will this blanket handle tropical weather with 27C
Answer:	I have had my similar cover for only 2 months now during winter use so I can't say that it would hold up or not to hot summers but I assume it would considering how sturdily constructed they are. I am here in NE Florida where the summers are in the 90's, the previous crappy cover that was on the pool lasted 10 years, these are much better covers in my opinion. If you can get the cover with the diamond pattern and in clear, much better, the clear lets the sun heat the water better and the diamond pattern provides more insulation to keep out the cold. My 12x24 clear, diamond pattern cover has been awesome, it has really cut down on the time that my heater runs in the winter months. It is also much thicker than my previous cover and that helps to.
Question:	Will this actually warm the pool quicker in the spring or just maintain the warmth already in the pool
Answer:	It will warm you quicker. I get about ten degrees warmer with it on my 10,000g pool
Question:	What type of warranty does this have
Answer:	Thank you for you question. This 1600 series crystal clear cover comes with a 3 limited warranty against seam separation and delamination. It also has a 10 year pro-rated warranty, after the first 3 years it becomes pro-rated against seam separation and delamination. Bubble damage is not covered since that is due to high chemical levels in the pool and UV rays. We have product specialists available that know a few tips on our to get the maximum life our of a solar cover. Thank you.
Question:	The current blanket we have ended up crystallizing. So, what is the the cycle of life of this blanket
Answer:	The cover is outside year-round in the Atlanta area. I got 18 months out of my 1600 series two full summers. When it started to deteriorate it went quickly - cracking, hand sized pieces coming off, etc. I’m ordering another. Temp goes up 7-8 degrees per day and down 3 degrees at night At the start of the season (March-April here). Extends the season by two months on both ends. I got the 20x40, cut it to shape (sort of a kidney shape), and attached it to a roller. The roller is ok, but sags with the 20’ width.

Product features

BUBBLES DOWN

Get the best results from using your solar cover by placing the bubble-side of the blanket facing downwards towards your water. This takes advantage of the free heat produced by the sun while more optimally retaining heat within your swimming pool.

FREE HEAT

Transmit UV rays into free heat for your swimming pool with thousands of small air bubbles built into this blanket. The air bubbles capture and transmit heat from the sun to your swimming pool for a more enjoyable swim!

PROTECT YOUR POOL

Stop any unwanted dirt and debris from entering your swimming pool with the Sun2Solar solar cover made from durable resin material. This material not only protects your pool, but also helps prevent up to 95% of your pool water from evaporating.

Product description

Make sure your swimming pool stays warm and heated without having to do much work! Keep your pool covered and enjoy the ease of removing the cover when are you ready to dive in for a swim. This one-person reel features special bearing systems at both ends of the reel, providing smooth, effortless removal of your solar blanket. With our reel you will use your solar blanket more often, saving money on gas while you swim in a warmer pool. The reel is anchored by rugged mounting brackets that are permanently installed on your pool's top rail (rail must be at least 6"). These mounting brackets allow you to remove your reel in the fall and install your winter cover without obstruction. The hand crank and base are constructed of durable non-corroding polymer material that will last and last. Our reel will fit either oval or round pools and it comes complete with solar blanket attachment hardware and installation instructions. Some assembly required. 3 year limited Warranty. NOTE: Covers larger than 20' must be folded at the ends to fit. Solar cover reel is not designed to fit over the center of the pool. This reel is not recommended for 16mil solar covers.

• FOR YOUR ABOVE-GROUND POOL - Fit your round above ground pool with a solar cover reel and take the work away from making sure your pool stays heated. Roll up and move your solar cover with ease when it's time to swim!
• MADE FOR 21' WIDE - Fits round above ground pools up to 21' wide
• ONLY NEEDS ONE PERSON - Easy one-person operation with steering wheel styled handle
• QUALITY MADE - Built from lightweight, non-corrosive plastic and sturdy aluminum tubing. Lift-and-swing design allows for reel to be pivoted away or removed before swimming
• WHAT'S INCLUDED - All necessary attachment hardware is included with the reel. Comes with three aluminum telescopic poles measuring to a 3" diameter. Solar Cover NOT Included!

User questions & answers

Question:	How does the cover attach to the reel? Do I need to buy straps
Answer:	The straps came with the reel system...easy to attach! FYI we chose not to attach the reel to our pavers instead my husband mounted each reel base onto a larger white plywood rectangle to stead them.
Question:	Will this work on a 10 foot wide 60 foot long lap pool
Answer:	I would think it would. I haven't installed mine yet as I want to attach to a deck.
Question:	What are the dimensions of this reel assembly
Answer:	We have ours at our vacation home in FL so I do not know the dimensions. FYI we did not want to drill the base into our brick patio, so my husband cut two boards and we painted them white and secured the wheelbase to them, added stability when unwinding or winding up the cover since we choose not to drill into our pavers. That way also when not in use we can move the entire set up out of the way. The boards we cut were approx. 11' by 20' for stability.
Question:	Can this be mounted to a deck around an above ground pool or does it have to be mounted to the rim of the pool
Answer:	It seems to me that you could mount it anywhere. Honestly I would rather have mine on my deck but I don't have deck around the entire pool. The only issue would be length of the aluminum tube.

• GET OFF THE GRASS - Keep from having to place your cover on your deck or the lawn where it could get dirty, muddy, or punctured from ground debris. Protect your cover with ease knowing it never has to touch the ground again.
• NO MORE REELS - Save space in comparison to a solar cover reel. Simply pull the cover off the pool and lay in the Solar Pocket™ Cover Holder. Covers can be placed back on the pool from the either inside or the outside of the pool for your convenience.
• ALUMINUM TUBING - Keep your solar blanket protected with five aluminum U-shaped tubes that come with pre-drilled holes with an 17” protrusion for the U-hooks to post properly against the pool wall.
• EASY INSTALLATION - Perfect for a new or existing pool, just drill underneath top rails for the 2 ¼” brackets. From the center bracket (for a 24’ round pool/cover), measure 10ft out to each side and mount the brackets. Then mount the intermediate brackets roughly 5’ from the center. Measurements will vary depending on your pool and cover size.
• STEEL SIDED POOLS ONLY - This product is designed for steel pool walls only. Do not use on any soft sided or metal framed pool walls

User questions & answers

Question:	How many saddles come with this
Answer:	just use little bolts and locking nuts.
Question:	What is the return policy
Answer:	No amigo. No le sirve
Question:	Wouldn't drilling into your top rails void the warranty of the pool manufacturer and/or installers
Answer:	Cover has holes. Not good for keeping bugs and crass clippings out of any pool.
Question:	where can I get replacement pins for the hangers
Answer:	I bought another brand 8' pool and bought this cover in 8'. Harley was right and it doesn't fit. It is about 2' too short so i am going to try this 10' to see if it fits. I will let you know what happens....!

Product features

How To Measure For The Solar Pocket

Solar Pocket consists of five j-hooks that are evenly spread to conveniently hold any solar cover up and off of the ground. Metal brackets hold the j-hooks which hangs freely off of the top rail of a swimming pool. To visualize a good placement of the Solar Pocket, simply lay your solar cover folded on the ground next to your swimming pool.

The Installation Process

Installing and assembling the Sun2Solar Solar Pocket is easy and only requires a few steps! Two bolts go into the pre-drilled holes of the top rail and through the mounting bracket which is then locked into place with two nuts. The Solar Pocket is then placed inside of the mounting bracket and held in place with another bolt and a nut.

Solar Pocket Installed

Once fully assembled, the Solar Pocket is ready to go and can hold any solar cover! You can see the image to the right to see what a fully assembled Solar Pocket should look from the side and front.

Product description

A solar cover is a great way to capture the sun’s heat and take full advantage of this natural resource to heat your above-ground or in-ground swimming pool. The benefits of owning a solar cover are plentiful and serve a multitude of purposes. Cover Benefits: Take advantage of the sun's FREE HEAT resulting in a warmer water Made from durable resin material Constructed with thousands of small air bubbles to capture and transmit heat from the sun to your swimming pool Blocks undesired dirt and debris from your pool Helps prevent up to 95% of pool water evaporation, thus reducing heat loss at night or on cloudy days. Cover Details: Size: 15' x 30' Cover Style: Blue Shape: Oval Mil: 8 NOTE: Please remember that the bubbles on the cover face DOWN into the water! Warranty 3 Years / 1 Year Full of Limited Warranty Coverage against manufacturer's defects **Disclaimer** Please note that solar covers may come with 2" - 11" of overlap to allow trimming to fit your pool - Trimming will NOT void the manufacturer’s warranty.

• ATTRACTIVE BLUE DESIGN - Sun2Solar solar blankets are made from a film of thousands of tiny bubbles, which work together to collect and retain heat both at night and on those chilly days. The blue color provides an appealing look while also using the sun’s rays to help warm your swimming pool.
• MINIMIZE WATER EVAPORATION - The use of a solar cover helps in preventing up to 95% of pool water evaporation. When not enjoying a refreshing swim, keeping your pool covered lessens the vast amount of water lost into the environment. Fill up your swimming pool less and enjoy it more!
• JUMP INTO WARMTH - Show friends and family your bravery by jumping in without the standard toe dip. Enter the swimming pool confidently knowing the Sun2Solar solar cover has kept the water warm just for you. It’s easy to put on and take off allowing more time for showing off.
• HEAT RETENTION - After everyone has called it a day with wrinkled fingers from too much fun in the sun, make sure to place this solar cover back atop the water. Don’t lose all of that warmth generated throughout the day when the sun sets. Assure your pool’s temperature does not drop too much by protecting it at night through use of a solar blanket.
• TRIM TO FIT - Your pool may be uniquely shaped and getting the right fit is as easy as finding a marker and sharp pair of scissors. Have the bubbles facing down to the water and trace a line on the cover showing where you should cut off the additional material. Do so confidently knowing this won’t affect the manufacturer’s warranty---they understand.

User questions & answers

Question:	have a kidney shape pool underground, which one should i get
Answer:	I have a round, 24 foot wide and 5 foot tall above ground pool. The solar blanket probably warmed our pool up 5° - 7° and kept the water from cooling off too much at night. With an in-ground pool, you probably don't have to worry as much about the nighttime cooling. The cover also reduced bugs and leaves. I've been happy with it.
Question:	I've never purchased a pool cover before. If my pool is 12 ft (round), do I buy a 12 ft. cover or do I need to purchase a larger cover
Answer:	The cover is left on the surface of the water. So exact would be ok. However, I have a 24 foot round above ground pool. I buy a 21 foot cover which allows it to ciculat around with the water flow and have room not to catch the ladder. It one gets the exact size they usually cut out for the ladder but don't let it circulate with the water. I found the cut out a bother with the water flow circulation and went with a smaller size which misses the steps.
Question:	how do you get it on and off the pool
Answer:	I have tired reels and a couple other things, but the best is a simple Solar Saddle system. They are PBV pipes that attach to the side of the pool. Simply pull the cover over and lay it in the saddles. Here is a link. https://www.amazon.com/Solar-Saddle-Pool-Cover-Holder/dp/B002WKK6QY/ref=sr_1_1?ie=UTF8&qid=1501514553&sr=8-1&keywords=solar+saddle+pool+cover+holder
Question:	Can anyone confirm that this bubbles on this cover are rounded, as the picture shows? I bought one with flat bubbles and not as good as the round one
Answer:	Yes rounded bubblesHeats up water really well
Question:	The description states aluminum tube set, what type of metal is used for the base, casters, screws, bolts and reel? I have a saltwater pool
Answer:	I have a saltwater pool also. The reel is aluminum. The hardware is steel with chrome plating, the legs are steel with plated chrome plating and rubber and the wheels are steel with painted hubs. So far after owning this 4 years I believe, it’s performed and lasted well. I have had trouble with the Velcro straps though and the plastic grips to attach the solar cover to the Velcro strips on the reel. Very cheesy way to mount.
Question:	Is this reel adjustable, meaning if I buy a 20 foot, can the pole be 16 feet, without the extra length
Answer:	Yes. When you put it together there is two sections that slide, one inside the other. Like a curtain rod, you adjust the length you need. So, it supports up to 21 foot in length, you only need 16 foot, you initially adjust it to your need. If you look closely at the photo, you'll see the difference in circumference at the half way mark.
Question:	Will a 16 mil cover 40 feet long fit and wind up all of the way on this reel? Will it sag In the middle
Answer:	I have a 16 mil 36 ft long on this reel with no sag.
Question:	Will the clips to attach to the cover puncture it? Also, I received a baggie with 2 long straps and 2 long cup hooks. What is that
Answer:	yes the clips do puncture the cover but thats how they attach to the cover, the straps then attach to the reel with a sticky substance and velcro pieces, but the sticky doesnt last long, my husband actually drilled the straps onto the real with screws and that keeps the straps in perfectly. i dont know what hooks your reffering to though..
Question:	does this chaulk up after about a years time
Answer:	Mine was done almost 4 years ago and has not caulked at all. It has worn out on the bottom some so we will probably repaint it next season. It has held its color nicely. We will use the same product again.
Question:	How long after you use the epoxy primer can you paint
Answer:	We put the epoxy on one day and painted the next day....a little less than 24 hours dry time.
Question:	Does this come with the catalyst? Is it Bikini blue or white like can in picture
Answer:	It comes with everything you need. Mine is a beautiful bikini blue. It's bee on over two years and is holding up great. We're pleased with it.
Question:	Is this psint good for fiberglass
Answer:	I would check with the seller. I used it on concrete last fall and it was great. We'll see how it held up in about 5 weeks when we open the pool for the summer. I don't know about fiberglass.
Question:	Can I use this primer on my concrete floor prior to applying epoxy base coat and top coat? And how long is dry time
Answer:	If it's a bare concrete floor, then yes. Although, I'm not sure that the "Base Coat" is not already a primer? Check with manufacturer. Drying time to "touch", an hour. But, I always waited overnight before applying a top coat to swimming pools.
Question:	Does this come with catalyst
Answer:	Yes it does.
Question:	Can it be used to prime fiberglass
Answer:	I only used it on one fiberglass walled pool with a poured concrete floor. The pool was extremely old and stained. After repairs to the fiberglass, I primed the entire pool and top coated it with Olympic Zeron. Saw it five years later and it still looked good.
Question:	Does this product work
Answer:	this product is a MUST USE if epoxying pool......worked GREAT for me when i put it down before using XERON
Question:	what is the proper preparaton techinique to use before applying primer
Answer:	Clean pool completely!
Question:	Are there any special considerations for sharp inside corners like a fibre mesh
Answer:	Not that I am aware of. I am super pleased with our pool after painting.
Question:	Do I need the primer for new, virgin concrete
Answer:	Yes you can use it.
Question:	I purchased the gunite primer do I need to purchase the water base epoxy primer or do they come together? Do you need both of these to prime properly
Answer:	They don't come together and you don't need both. If pool is porous you need gunite. If smooth just primer.
Question:	Is this acrylic based pait
Answer:	Yes, easy clean up latex
Question:	Does it say if you can use this on metal pools
Answer:	To the best of my knowledge, No it does not. It is very good paint that needs to be thinned but is meant for concrete pools.
Question:	Can this be used on fiberglass pools
Answer:	Yes
Question:	do you have to use primer first
Answer:	I haven’t used primer, also make sure to apply paint during the right temp, to hot and paint will bubble. Also make sure to let it cure
Question:	Can I paint over black algae with this and have it kill off the black algae like it's interior counter part would with mold
Answer:	If you are using this for pool surface which will be under water I DO NOT recommend this paint as it will chip and crack in a matter of weeks.
Question:	Can I use this to paint a concrete and concrete block indoor shower
Answer:	Probably, we used ours for our pool and accidentally got some in the concrete and it does NOT come off at all ! Which could be a good and bad thing...
Question:	Would this work on outdoor wooden steps
Answer:	No. It’s a very rubbery finish since it’s meant for plaster pools. It would be slippery on outdoor steps. Even though it’s used in pools, it’s more of a slick finish when it dries. Also it’s usually expensive, much cheaper paints and stains available at the local hardware store or online.
Question:	Can this be painted over a concrete pool that has been previously painted and then acid washed
Answer:	I believe you can use this over previously painted services. The manufacture advises pressure washing first, fixing any cracks, and washing down with TSP. Clean and dry are the keys. I don't believe acid washing will do anything over previously painted concrete. Normally acid washing is to open the pours in unpainted concrete.
Question:	Do you have to apply the cool deck coats and then another clear sealer on top of that? What kind of clear sealer do you get
Answer:	The COO! pool deck BUNDLE comes with one gallon of Triple Crown Cleaner and a half gallon of the SealBack Clear Sealer. SealBack is a water based acrylic sealer that is engineered for sealing the COOL! coating itself. It's water thin, delivering great penetration. We recommend 2 GOOD coats of COOL in the morning hours before temperatures get too hot (use 3/4" nap rollers) , and 2 THIN coats of SealBack during the hottest part of the day(use 1/2" nap rollers)! The SealBack sealer loves to be applied in the bright sunshine for maximum cure. Thank you and reach out to us anytime! (888) 776-2242 .
Question:	How long does it take for the sealer to dry
Answer:	Hi. Thanks for your question. In a typical application, the sealer will be dry and open for foot traffic in one hour. However, you should not apply the sealer if rain is in the 24 hour forecast. Hope this helps! We appreciate your interest in our product.
Question:	Can this be used on a wooden deck
Answer:	Hi. No. Cool is only for concrete. Thanks for your interest in our product.
Question:	What type of paint and how much
Answer:	Add 1 gallon of paint to the product.
Question:	can i tent the paint different colors? and will it hold to metal roof
Answer:	Yes, I had a commercial job that required Tinting and did so by purchasing a couple of different colors in quarts to adjust the Primary Base color. I have never used Epoxy Paint on a metal roof, and would not think to use an Epoxy paint if it was rusty, or Galvanised. I used it once on a Commercial Aluminum pool inside of a hotel, but it did require a special primer to be applied first.
Question:	CAn this be painted on plastic pool steps to cover cracks
Answer:	it's not made to repair cracks but if they are only surface cracks maybe it would work.
Question:	Ok for salt water pools
Answer:	It is an epoxy paint mixed prior to use. If the pool is first washed down with fresh water an allowed ample time to dry before use, I am not aware of any reason it should not do a good job.
Question:	Does this product replace the plaster step? Will it waterproof concrete
Answer:	No it will not replace the plaster step. Not sure if it will waterproof concrete. We used it on the sides of the pool. Sides are like regular pool sides. It does waterproof them. We used a different pool paint on the concrete part of our pool
Question:	I'm got a 24' round above ground pool. it has 16 posts. i remove the ladder at the end of the season. how do i order this and what's the price
Answer:	We got that railing and you simply count the posts which for is 16 and tell them how many posts you have, you can order a hinged door for when you take the ladder out.
Question:	I have a 18' x 30' ovel shaped pool How many sctions would be required and are some curved and others stright sections
Answer:	All come straight but they are vinyl and be bent slightly to accommodate the curved portion of your pool my pool is a 27 round and they worked just fine.
Question:	Can you use these with an Intex 24x22x52” pool
Answer:	Yes
Question:	Is the panel 24" or is 24" the length of the post
Answer:	We bought this safety fence, the railing itself is 24” tall, and it says you should not have an opening larger than 4”, this allows you to locate it properly.
Question:	Can this detect motion from a dog that weighs 10 pounds
Answer:	Depends on how close to the alarm set dog falls in, if it doesn’t cause a wave enough to move the floating cone then it won’t sound the alarm
Question:	How come this doesn’t work in polls below the ground
Answer:	It just doesn’t work. Don’t buy us unless you have an Indoor pool because a slight breeze will sound the alarm
Question:	Can this be used on a fiberglass pool with white gelcoat
Answer:	I am not an expert, but I see no reason you couldn't, it works well even over old pool paint
Question:	Can I use this on my fiberglass stairs in the pool
Answer:	probably, this stuff is the only paint I know of that sticks to galvanized metal, scratch a test spot and try it out, give it a few days to cure, then see if it comes off. It has a very high VOC, wear a respirator, or you might get sick from fumes
Question:	How much paint is needed
Answer:	How much paint is needed for a 18 x 34 pool
Question:	I have a concrete pool w/fiberglass sides (Poorly) painted w/acrylic last time. Can I use this over a thin coat of acrylic w/ ++concrete showing thru
Answer:	We were restoring a pool that had not been maintained in a few years and covering layers of I am not even sure what, after we pressure washed off as much as possible and this paint covered and bonded to the surface very well. It has been a year now since we painted and it is still performing well.
Question:	what is the proper preparaton techinique to use before applying primer
Answer:	Clean pool completely!
Question:	Are there any special considerations for sharp inside corners like a fibre mesh
Answer:	Not that I am aware of. I am super pleased with our pool after painting.
Question:	Do I need the primer for new, virgin concrete
Answer:	Yes you can use it.
Question:	I purchased the gunite primer do I need to purchase the water base epoxy primer or do they come together? Do you need both of these to prime properly
Answer:	They don't come together and you don't need both. If pool is porous you need gunite. If smooth just primer.
Question:	Can this be used on a shower floor
Answer:	I would not recommend this for shower floors.
Question:	Can it applied over painted cool deck and patch repairs
Answer:	As long as the Cool Deck has been previously painted with a water-based paint, yes you can. It can also be painted over patches if that's what your asking.
Question:	Can this be used on block wall
Answer:	I don’t see why not. It’s just a little bit thicker then paint.
Question:	How can I get this tinted
Answer:	To tint this you add 1gallon of paint in the color you want. We have several Amazon listings with paint that will work well in it. Message me and I will direct you to them. You can purchase both at once and I will mix here at the shop.
Question:	What kind of prep work is needed before applying this? Will pressure washing be enough
Answer:	Yes in my opinion love this product
Question:	How many square feet does one can cover? Do you have to prepare the concrete first
Answer:	It covers about 250 SF. Water wash the concrete first, it can be damp for the first coat. Be sure to water the paint down for the first coat so it soaks into the concrete. The second coat can go on full strength. Do not paint on a hot day! the paint will dry before soaking in. If it does not soak in, it peels off.
Question:	will product hold up to being power washed the following year
Answer:	Yes, as long as you do not hold the nozzle too close to the surface.
Question:	Is this product cool to the feet
Answer:	I had a treatment put on the deck that breaks up the flatness of the cement and then painted over with this paint. I live in Alabama and the treated / painted part of the pool deck never gets hot .
Question:	Is there an expiration date on this paint
Answer:	I don't believe there is. I have had several gallons in my garage for a couple years and used it a few weeks ago. It's good as new.
Question:	how well will this cover existing paint on by pool sundeck
Answer:	Very well
Question:	how well will this cover existing paint on by pool sundeck
Answer:	It may need 2 coats but should cover very well
Question:	Can you use this over dyco pool paint
Answer:	It is just ‘okay.’ Requires a lot to cover and after less than one year, some blemishes that seemed covered are showing through. I would probably go to a reputable paint store and get advice before doing it again.
Question:	Can you apply it over old paint
Answer:	My deck was painted concrete and I applied over it after patching cracks. I hadn't had any peeling paint so I didn't have any problems.
Question:	Can this be used over Kool Deck pool patios
Answer:	Not sure. I used it on my pool deck.
Question:	what coverage area are you seeing for re-coating a deck surface. (15 year old deck
Answer:	My deck hadn’t been done in 15 years. This is a good looking product. Goes on easy and covers well. Took seven gallons to do two coats. No additives needed. Just make sure area is clean first. We pressure washed; waited 24 hours; and the swept. Would buy again.
Question:	Do you have to apply the cool deck coats and then another clear sealer on top of that? What kind of clear sealer do you get
Answer:	The COO! pool deck BUNDLE comes with one gallon of Triple Crown Cleaner and a half gallon of the SealBack Clear Sealer. SealBack is a water based acrylic sealer that is engineered for sealing the COOL! coating itself. It's water thin, delivering great penetration. We recommend 2 GOOD coats of COOL in the morning hours before temperatures get too hot (use 3/4" nap rollers) , and 2 THIN coats of SealBack during the hottest part of the day(use 1/2" nap rollers)! The SealBack sealer loves to be applied in the bright sunshine for maximum cure. Thank you and reach out to us anytime! (888) 776-2242 .
Question:	How long does it take for the sealer to dry
Answer:	Hi. Thanks for your question. In a typical application, the sealer will be dry and open for foot traffic in one hour. However, you should not apply the sealer if rain is in the 24 hour forecast. Hope this helps! We appreciate your interest in our product.
Question:	Can this be used on a wooden deck
Answer:	Hi. No. Cool is only for concrete. Thanks for your interest in our product.
Question:	What type of paint and how much
Answer:	Add 1 gallon of paint to the product.

Product features

In The Swim Patio and Deck Paint

In The Swim Patio and Deck Paint is a water-based acrylic non-slip concrete deck coating. Patio and Deck Paint can be applied to damp surfaces, cutting the time between site preparation and roller painting. First time applications will require a minimum two coats depending on surface porosity. Patio and Deck Paint should be applied with a 1/2" nap roller on smooth surfaces. Use a 3/4" nap roller cover on rougher surfaces. Coverage: 90 - 125 sq ft per gallon on average. If the outside ambient air temperature if above 80°F, wait 4 hours between coats. Curing time: Before foot traffic is 24 - 48 hours depending on the outside ambient air temperature.

Determine Area Size

Determining the square foot of the area you are coating is important. This will help you figure out how many gallons of paint are needed to complete the job. It’s important to take the surface porosity and smoothness into account when deciding how much paint to purchase. Start by measuring the length and width of the area. Once you have those measurements plug them into the formulas below. Divide that number by the coverage square foot of the coating you are wanting to use. That will give you the number of gallons that you should purchase. Remember to look and see if the paint requires a single or multiple coats and if it needs a primer.

Prepare the Surface

When preparing a surface for a coating of any kind it is important to clean the area. Start by sweeping, scraping, and scrubbing the area removing any loose debris. Then hose and scrub the surface with tri-sodium phosphate 10% solution. The solution will degrease and rid the surface of any unwanted contaminants. We suggest on smooth surfaces to do a light acid wash to etch the surface. The etching will allow the paint to adhere to the surface firmly. Hose and scrub the area again with the tri-sodium phosphate 10% solution. Hose completely clean. This will remove additional debris and neutralize the acid. Allow the surface to dry with no puddles or standing water.

First and Second Coats

In The Swim Patio and Deck Paint should be applied to a damp surface with no standing water. Use a 1/2" nap roller on smooth surfaces. Use a 3/4" nap roller on rough surfaces. Roll on the first coat of paint allow a minimum of 4 hours before starting the second coat. After the 4 hour wait you are clear to roll the second coat. Wait 24 - 48 hour before the area can take heavy traffic. Coverage: 90 - 125 sq ft per gallon on average.

In The Swim Gunite Primer for Epoxy-Base Swimming Pool Paints

In The Swim Gunite Primer is a two-part epoxy primer typically used on fiberglass gel-coat, rough plaster, rough concrete, or sandblasted surfaces. Gunite Primer's heavy viscosity fills imperfections on the interior surface give a more uniform look. Gunite Primer should be rolled on with a paint roller. Coverage: Approximately 100-150 square feet per gallon. Should be applied liberally using a 1/2" nap roller cover. Pot Life: 4 hours at 85° F. Curing Time before rolling Super Poxy Shield 24 - 48 hours.

Determine Area Size

Determining the square foot of the area you are going to paint is important. This will help you figure out how many gallons of paint are needed to complete the job. It’s important to take the surface porosity and smoothness into account. When looking at how much paint you should purchase. Start by measuring the length and width of the area. Once you have those measurements plug them into the formulas below. Divide that number by the coverage square foot of the paint you are wanting to use. That will give you the number of gallons that you should purchase. Remember to look and see if the paint requires single or multiple coats and if it needs a primer.

Drain Water

Now that you have selected the paint type and know the square footage of the interior, it’s time to drain the pool. Rent or purchase a submersible pump. As soon as the outside ambient air temperature drops below 85° F. Check the local code for where pool water can be drained and start pumping. If the outside ambient air temperature is above 85° F stop draining the pool. At these elevated temperatures, the interior surface can crack and lose its structural integrity. While the pool is draining, remember that you can start to prepare the pool for paint.

Prepare for Paint

Now that the pool has been drained, you can start to prep the interior for paint. Start by removing the perimeter return jets, pool/spa light, main drain covers, aerator fittings and any other item you don’t want painted. Using painters tape, carefully tape off all the tile line, step/bench tiles, return lines, and skimmer mouth. Once you have everything taped off it’s time to prime.

Primer Coat

Now that the pool has been drained and taped, it’s time to prime. Remember not all types of paint use a primer. So if you have paint that doesn’t use a primer, skip to the painting step. Roll the primer onto the interior surface of the pool using a 9” roller with a ½” nap, starting with the walls and ending with the floor. Once you’ve completed priming allow the prime to cure for 24 - 48 hours. Then it’s time to paint.

Painting Interior

The pool has now been drained, taped, and primed. It’s time for paint. The type of paint you choose will determine the number of coats. Start painting the walls first and finish with the floor. If the paint you are using requires a time period in between coats, make sure you take that time. It will allow the paint to cure and harden increasing its chemical resistance and life span. It is suggested for steps, shallow areas and wading pools, sprinkle sand on the coating before it dries to make the area slip-resistant.

Fill and Balance

Now that the pool is painted and the paint has cured, it’s time to fill the pool and balance the water. Depending on your area you may need to order a water truck to deliver. If you have a garden hose available, toss it in. The average pool should take anywhere from 36 - 48 hours to fill. Once the pool is full allow the fresh water to circulate for 3 - 4 hours. After the circulation period it’s time to complete the first water test of many on the new water. Make sure to test the water weekly to maintain proper water balance and overall pool health.

In The Swim CRC Pro-Series Chlorinated Rubber-Base Pool Paint

In The Swim CRC Pro-Series Chlorinated Rubber-Base Pool Paint is a self-priming paint designed as a re-coat for existing rubber-base finishes. If re-coating an existing interior, one coat is suggested. A second coat may be required on unpainted or porous surfaces. Chlorinated Rubber-Base Pool Paint has excellent chemical resistance and color retention, allowing the paint to last 3 years on average. Coverage: 250 square feet per gallon on average. This product should be applied with a 9" roller equipped with a 3/8" nap. Pot Life: Indefinite as long as it is properly sealed. Allow to cure 4 - 6 hours in between coats. Cure 10 days minimum before filling.

Determine Area Size

Determining the square foot of the area you are going to paint is important. This will help you figure out how many gallons of paint are needed to complete the job. It’s important to take the surface porosity and smoothness into account. When looking at how much paint you should purchase. Start by measuring the length and width of the area. Once you have those measurements plug them into the formulas below. Divide that number by the coverage square foot of the paint you are wanting to use. That will give you the number of gallons that you should purchase. Remember to look and see if the paint requires single or multiple coats and if it needs a primer.

Drain Water

Now that you have selected the paint type and know the square footage of the interior, it’s time to drain the pool. Rent or purchase a submersible pump. As soon as the outside ambient air temperature drops below 85° F. Check the local code for where pool water can be drained and start pumping. If the outside ambient air temperature is above 85° F stop draining the pool. At these elevated temperatures, the interior surface can crack and lose its structural integrity. While the pool is draining, remember that you can start to prepare the pool for paint.

Prepare for Paint

Now that the pool has been drained, you can start to prep the interior for paint. Start by removing the perimeter return jets, pool/spa light, main drain covers, aerator fittings and any other item you don’t want painted. Using painters tape, carefully tape off all the tile line, step/bench tiles, return lines, and skimmer mouth. Once you have everything taped off it’s time to prime.

Primer Coat

Now that the pool has been drained and taped, it’s time to prime. Remember not all types of paint use a primer. So if you have paint that doesn’t use a primer, skip to the painting step. Roll the primer onto the interior surface of the pool using a 9” roller with a ½” nap, starting with the walls and ending with the floor. Once you’ve completed priming allow the prime to cure for 24 - 48 hours. Then it’s time to paint.

Painting Interior

The pool has now been drained, taped, and primed. It’s time for paint. The type of paint you choose will determine the number of coats. Start painting the walls first and finish with the floor. If the paint you are using requires a time period in between coats, make sure you take that time. It will allow the paint to cure and harden increasing its chemical resistance and life span. It is suggested for steps, shallow areas and wading pools, sprinkle sand on the coating before it dries to make the area slip-resistant.

Fill and Balance

Now that the pool is painted and the paint has cured, it’s time to fill the pool and balance the water. Depending on your area you may need to order a water truck to deliver. If you have a garden hose available, toss it in. The average pool should take anywhere from 36 - 48 hours to fill. Once the pool is full allow the fresh water to circulate for 3 - 4 hours. After the circulation period it’s time to complete the first water test of many on the new water. Make sure to test the water weekly to maintain proper water balance and overall pool health.

In The Swim Aqua Coat Water-Base Swimming Pool Paint

In The Swim Aqua Coat Water-Base Swimming Pool Paint is a water-based acrylic pool paint. Aqua Coat can be applied to damp surfaces. This water-based acrylic pool paint can be applied to previous acrylic coating or over rubber base paint. Versatile water-based acrylic pool paint yields a short down time of only 3 days in most cases. Requires a minimum of 2 coats on initial application. Coverage: Approximately 250 - 300 sq ft per gallon. Should be applied with a 9” roller equipped with a ⅜” nap. Apply second coat at least 4 hours after the first coat. Pot Life: Indefinite as long as it is properly sealed. Allow to cure for 2 days before filling.

Determine Area Size

Determining the square foot of the area you are going to paint is important. This will help you figure out how many gallons of paint are needed to complete the job. It’s important to take the surface porosity and smoothness into account. When looking at how much paint you should purchase. Start by measuring the length and width of the area. Once you have those measurements plug them into the formulas below. Divide that number by the coverage square foot of the paint you are wanting to use. That will give you the number of gallons that you should purchase. Remember to look and see if the paint requires single or multiple coats and if it needs a primer.

Drain Water

Now that you have selected the paint type and know the square footage of the interior, it’s time to drain the pool. Rent or purchase a submersible pump. As soon as the outside ambient air temperature drops below 85° F. Check the local code for where pool water can be drained and start pumping. If the outside ambient air temperature is above 85° F stop draining the pool. At these elevated temperatures, the interior surface can crack and lose its structural integrity. While the pool is draining, remember that you can start to prepare the pool for paint.

Prepare for Paint

Now that the pool has been drained, you can start to prep the interior for paint. Start by removing the perimeter return jets, pool/spa light, main drain covers, aerator fittings and any other item you don’t want painted. Using painters tape, carefully tape off all the tile line, step/bench tiles, return lines, and skimmer mouth. Once you have everything taped off it’s time to prime.

Primer Coat

Now that the pool has been drained and taped, it’s time to prime. Remember not all types of paint use a primer. So if you have paint that doesn’t use a primer, skip to the painting step. Roll the primer onto the interior surface of the pool using a 9” roller with a ½” nap, starting with the walls and ending with the floor. Once you’ve completed priming allow the prime to cure for 24 - 48 hours. Then it’s time to paint.

Painting Interior

The pool has now been drained, taped, and primed. It’s time for paint. The type of paint you choose will determine the number of coats. Start painting the walls first and finish with the floor. If the paint you are using requires a time period in between coats, make sure you take that time. It will allow the paint to cure and harden increasing its chemical resistance and life span. It is suggested for steps, shallow areas and wading pools, sprinkle sand on the coating before it dries to make the area slip-resistant.

Fill and Balance

Now that the pool is painted and the paint has cured, it’s time to fill the pool and balance the water. Depending on your area you may need to order a water truck to deliver. If you have a garden hose available, toss it in. The average pool should take anywhere from 36 - 48 hours to fill. Once the pool is full allow the fresh water to circulate for 3 - 4 hours. After the circulation period it’s time to complete the first water test of many on the new water. Make sure to test the water weekly to maintain proper water balance and overall pool health.

In The Swim Gunite Primer for Epoxy-Base Swimming Pool Paints

In The Swim Gunite Primer is a two-part epoxy primer typically used on fiberglass gel-coat, rough plaster, rough concrete, or sandblasted surfaces. Gunite Primer's heavy viscosity fills imperfections on the interior surface give a more uniform look. Gunite Primer should be rolled on with a paint roller. Coverage: Approximately 100-150 square feet per gallon. Should be applied liberally using a 1/2" nap roller cover. Pot Life: 4 hours at 85° F. Curing Time before rolling Super Poxy Shield 24 - 48 hours.

Determine Area Size

Determining the square foot of the area you are going to paint is important. This will help you figure out how many gallons of paint are needed to complete the job. It’s important to take the surface porosity and smoothness into account. When looking at how much paint you should purchase. Start by measuring the length and width of the area. Once you have those measurements plug them into the formulas below. Divide that number by the coverage square foot of the paint you are wanting to use. That will give you the number of gallons that you should purchase. Remember to look and see if the paint requires single or multiple coats and if it needs a primer.

Drain Water

Now that you have selected the paint type and know the square footage of the interior, it’s time to drain the pool. Rent or purchase a submersible pump. As soon as the outside ambient air temperature drops below 85° F. Check the local code for where pool water can be drained and start pumping. If the outside ambient air temperature is above 85° F stop draining the pool. At these elevated temperatures, the interior surface can crack and lose its structural integrity. While the pool is draining, remember that you can start to prepare the pool for paint.

Prepare for Paint

Now that the pool has been drained, you can start to prep the interior for paint. Start by removing the perimeter return jets, pool/spa light, main drain covers, aerator fittings and any other item you don’t want painted. Using painters tape, carefully tape off all the tile line, step/bench tiles, return lines, and skimmer mouth. Once you have everything taped off it’s time to prime.

Primer Coat

Now that the pool has been drained and taped, it’s time to prime. Remember not all types of paint use a primer. So if you have paint that doesn’t use a primer, skip to the painting step. Roll the primer onto the interior surface of the pool using a 9” roller with a ½” nap, starting with the walls and ending with the floor. Once you’ve completed priming allow the prime to cure for 24 - 48 hours. Then it’s time to paint.

Painting Interior

The pool has now been drained, taped, and primed. It’s time for paint. The type of paint you choose will determine the number of coats. Start painting the walls first and finish with the floor. If the paint you are using requires a time period in between coats, make sure you take that time. It will allow the paint to cure and harden increasing its chemical resistance and life span. It is suggested for steps, shallow areas and wading pools, sprinkle sand on the coating before it dries to make the area slip-resistant.

Fill and Balance

Now that the pool is painted and the paint has cured, it’s time to fill the pool and balance the water. Depending on your area you may need to order a water truck to deliver. If you have a garden hose available, toss it in. The average pool should take anywhere from 36 - 48 hours to fill. Once the pool is full allow the fresh water to circulate for 3 - 4 hours. After the circulation period it’s time to complete the first water test of many on the new water. Make sure to test the water weekly to maintain proper water balance and overall pool health.

BUBBLES DOWN

Get the best results from using your solar cover by placing the bubble-side of the blanket facing downwards towards your water. This takes advantage of the free heat produced by the sun while more optimally retaining heat within your swimming pool.

FREE HEAT

Transmit UV rays into free heat for your swimming pool with thousands of small air bubbles built into this blanket. The air bubbles capture and transmit heat from the sun to your swimming pool for a more enjoyable swim!

PROTECT YOUR POOL

Stop any unwanted dirt and debris from entering your swimming pool with the Sun2Solar solar cover made from durable resin material. This material not only protects but also helps prevent up to 95% of your pool water from evaporating.

Product description

The Titan Attachments 5 ft. Lightweight Econo Grapple Bucket features a universal skid steer hookup, allowing it to attach to several different makes of haulers. Included with your purchase are hoses and flat-faced couplers. You will also get a protective canvas sleeve that keeps the hydraulic hoses from getting pinched while you use them. Part of what makes this machinery so efficient is its twin 3,000 PSI cylinder, which makes for some powerful lift.ing.



NOTE: This Lightweight Rake Grapple cannot handle commercial-grade work, like digging or pulling trees, rocks, or heavy roots from the ground. Additionally, when you order this grapple rake, you will need to provide your phone number so the trucking and shipping company can schedule delivery.



Specifications:

-Overall Length: 60-in.

-Overall Width: 36.7-in.

-Opening Height: 25-in.

-Teeth Length: 30.5-in.

-Top Teeth Thickness: 0.5-in.

-Bottom Teeth Thickness: 0.375-in.

-Finish: Powder-Coated Black

-Material: Steel

-Product Weight: 485 lb.

• UNIVERSAL SKID STEER HOOKUP: This Root Grapple Bucket is built with a Universal Skid Steer Hookup, allowing it to attach to several different makes of Kubota and Bobcat haulers. Along with the grapple rake, you will receive hoses and flat-faced couplers with your purchase. This set comes with a protective canvas sleeve that keeps the hydraulic hoses from getting pinched during use.
• TWIN 3,000 PSI CYLINDER: At Titan Attachments, performance is key. That is why this tractor implement operates through a twin 3,000 PSI cylinder for smooth execution. Its powerful cylinder enables your root grapple rake to have the lifting power you need. Clear out thick brush or heavy debris using this strong root grapple rake.
• SERRATED LEADING EDGE: This attachment features a serrated leading edge that can easily tear through small roots and brush. This grapple is NOT intended for heavier duty, commercial-grade work. It cannot dig or pull trees or rocks from the ground. This attachment provides an exceptional grip, so you can get to all those pesky roots and pull out that irritating brush with ease.
• GREAT FOR LANDSCAPING: If you need to remove debris from your yard, garden, or farm, then this tool is perfect for you! It can help you remove small roots, grapple logs, and move straw and brush. Whether you are moving parts, transporting pipes, or grooming the lawn, you will want to invest in this piece of extremely useful equipment.
• DIMENSIONS: This grapple rake weighs 485-pounds and features a length of 60-inches with an opening height of 25-inches. The teeth of the grapple rake measure at 30.5-inches in length. The top teeth have a thickness of 0.5-inches and the bottom teeth have a thickness of 0.375-inches.

User questions & answers

Question:	Will my massey furguson 1742 with a dl125 loader handle this
Answer:	All I can tell you is that I have one on a Kubota SSV65 skidloader, 65 horsepower. The Kubota handles it quite well, I'm very happy with the grapple. I added a plate to protect the hydraulic hoses in a spot.
Question:	Will this fit 2017 Mahindra loader without alteration
Answer:	If you’re bucket is set up with the quick disconnect and plumbed for the hydraulics it should fit? I use it on my 763 bobcat and my L39 kubota tractor. You might need to change out the couplers for the hydraulic connects ? Product works great! well built for the price you can’t go wrong!
Question:	What grade of steel is used for the 1/2” teeth on this grapple? A
Answer:	I have used it for everything. IT don't bend.
Question:	will this go on a kubota quick attach system
Answer:	Yes. I’m using it on my L47

Product description

The Titan 72” Heavy Duty Root Grapple is designed to fit John Deere loaders and is ideal for picking up and moving rocks, logs, brush, debris, and other oddly shaped or hard to lift materials. The extra-wide opening of the rake style grapple makes pushing and gripping large loads easy. This includes the connections, pins, bushings to fit John Deere loaders. Check below to see a list of compatible loader series.



Features:

- Fits John Deere loaders.

- Top pin set fits: H120, D120, 210, 200x, 200cx, 300cx, 300x, 305, 400x, 400cx, 410, 419, 420, 430, 440, & 460 series loaders.

- Bottom pin set fits: 500, 510, 520, 521, 540, 541, & 542 series Ag loaders.

- Greasable pins and bushings.

- Twin 3,000 PSI cylinders. 

- Hoses, pioneer-style couplers, & bucket teeth included.

- Does not fit any loaders equipped with the Global/Euro style or universal Skid Steer style mount.



Specifications:

- Weight: 1,080 lb 

- Opening height: 48" 

- Teeth length: 24" 

- Bottom teeth: 20" 

- Width: 41" 

- Side Thickness: 1/2" 

- Teeth Length: 24" 

- Teeth Thickness: 1/2"

- Material: Heavy duty steel 

- Color: Green

• Compatibility: Fits John Deere quick-tach loaders; check below for compatibility list
• Durability: Made of thick HD 1/2" steel that stands up to tough jobs
• Value: High quality materials for less than dealer price
• Usage: Make short work of digging rocks, picking up brush, etc.
• We need your phone number! For the trucking company to schedule delivery. Without it there will be delays.

User questions & answers

Question:	What size hydraulic couplers does it come with
Answer:	If I remember correctly it came with hoses but no ends. You will need to buy the ones your equipment takes.

Product features

Titan Attachments 72" HD Root Grapple Rake Attachment fits John Deere Loaders

The Titan 72” Heavy Duty Root Grapple is designed to fit John Deere loaders and is ideal for picking up and moving rocks, logs, brush, debris, and other oddly shaped or hard to lift materials. The extra-wide opening of the rake style grapple makes pushing and gripping large loads easy. This includes the connections, pins, bushings to fit John Deere loaders. Check below to see a list of compatible loader series.

FITS JOHN DEERE LOADERS

TOP PIN SET FITS: H120, D120, 210, 200x, 200cx, 300cx, 300x, 305, 400x, 400cx, 410, 419, 420, 430, 440, & 460 SERIES LOADERS

BOTTOM PIN SET FITS: 500, 510, 520, 521, 540, 541, & 542 SERIES AG LOADERS

DOES NOT FIT ANY LOADERS EQUIPPED WITH THE GLOBAL/EURO STYLE OR UNIVERSAL SKID STEER STYLE MOUNT

Search ASIN B086T5YHFD

Titan Attachments LW80 OEM Bucket Tooth Kit With Shank Tooth Side Pin And Retainer | Single

Search ASIN B086T6KT5N

Titan Attachments LW80 OEM Bucket Tooth Kit With Shank Tooth Side Pin And Retainer | 3 Pack

Search ASIN B086T4TJHF

Titan Attachments LW80 OEM Bucket Tooth Kit With Shank Tooth Side Pin And Retainer | 5 Pack

• UNIVERSAL SKID STEER HOOKUP: This fine grade rock grapple bucket is built with a universal skid steer hookup, allowing it to attach to several different makes of loaders. The frame is made with a 3in x 3in steel tubing that is finished with a durable matte black powder coat paint. Along with the grapple rake, youll receive hoses and couplers with your purchase.
• GREAT FOR LANDSCAPING: If you need to remove debris from your yard, garden, or farm, then this tool is perfect for you! It can help you sift through rocks, roots, logs, brush, and more while returning the valuable dirt to your land. Whether you are moving parts, transporting pipes, or grooming the lawn, you will want to invest in this piece of extremely useful equipment.
• SKELETON FRAME: At Titan Attachments, performance is key. That is why this tractor implement is designed with a skeleton frame. It is perfect for clearing rocks and large debris. The skeleton frame allows you to clear your land without hauling the dirt away. Clear out thick brush or heavy debris using this strong rock grapple loader.
• REPLACEABLE TEETH: This attachment features teeth that can be easily replaced. This grapple is intended for heavyduty work. It can dig or pull trees or rocks from the ground. This attachment provides an exceptional grip, so you can get to all those pesky rocks or pull out that irritating brush with ease. The maximum opening height is 35.5inches.
• DIMENSIONS: This grapple rake weighs approximately 1,157pounds. It has an inside width of 73inches, an outside width of 74inches, and a depth of 49inches. The tines of the grapple rake are spaced 3inches apart. The steel teeth have a thickness of 0.5inches and the cutting edge is 1inch.

User questions & answers

Question:	Will my massey furguson 1742 with a dl125 loader handle this
Answer:	All I can tell you is that I have one on a Kubota SSV65 skidloader, 65 horsepower. The Kubota handles it quite well, I'm very happy with the grapple. I added a plate to protect the hydraulic hoses in a spot.
Question:	Will this fit 2017 Mahindra loader without alteration
Answer:	If you’re bucket is set up with the quick disconnect and plumbed for the hydraulics it should fit? I use it on my 763 bobcat and my L39 kubota tractor. You might need to change out the couplers for the hydraulic connects ? Product works great! well built for the price you can’t go wrong!
Question:	What grade of steel is used for the 1/2” teeth on this grapple? A
Answer:	I have used it for everything. IT don't bend.
Question:	will this go on a kubota quick attach system
Answer:	Yes. I’m using it on my L47
Question:	The description states aluminum tube set, what type of metal is used for the base, casters, screws, bolts and reel? I have a saltwater pool
Answer:	I have a saltwater pool also. The reel is aluminum. The hardware is steel with chrome plating, the legs are steel with plated chrome plating and rubber and the wheels are steel with painted hubs. So far after owning this 4 years I believe, it’s performed and lasted well. I have had trouble with the Velcro straps though and the plastic grips to attach the solar cover to the Velcro strips on the reel. Very cheesy way to mount.
Question:	Is this reel adjustable, meaning if I buy a 20 foot, can the pole be 16 feet, without the extra length
Answer:	Yes. When you put it together there is two sections that slide, one inside the other. Like a curtain rod, you adjust the length you need. So, it supports up to 21 foot in length, you only need 16 foot, you initially adjust it to your need. If you look closely at the photo, you'll see the difference in circumference at the half way mark.
Question:	Will a 16 mil cover 40 feet long fit and wind up all of the way on this reel? Will it sag In the middle
Answer:	I have a 16 mil 36 ft long on this reel with no sag.
Question:	Will the clips to attach to the cover puncture it? Also, I received a baggie with 2 long straps and 2 long cup hooks. What is that
Answer:	yes the clips do puncture the cover but thats how they attach to the cover, the straps then attach to the reel with a sticky substance and velcro pieces, but the sticky doesnt last long, my husband actually drilled the straps onto the real with screws and that keeps the straps in perfectly. i dont know what hooks your reffering to though..

Product features

Titan Attachments 72 in. Fine Grade Rock Grapple Skeleton Loader, Universal Skid Steer with Couplers and Hoses

This 72 inch fine grade grapple rake is ideal for collecting rocks and other debris. This attachment features a universal skid steer hookup. Included with your purchase are hoses and flat-faced couplers and two 2.5 inch bore x 8 inch stroke hydraulic cylinders. This attachment features a skeleton frame with 6 replaceable teeth and fifteen 0.5 inch steel tines, making rock and brush removal easy. The frame is built with 3 in x 3 in steel tubing and weighs 1,157 pounds. The outside width of this rock bucket is 74 inches and the inside width is 73 inches. The maximum opening height is 35.5 inches. The tines are spaced 3 inches from each other. The rake has a depth of 49 inches. The teeth measure at 0.5 inches in thickness.

UNIVERSAL SKID STEER HOOKUP

This fine grade rock grapple bucket is built with a universal skid steer hookup, allowing it to attach to several different makes of loaders. The frame is made with a 3 in. x 3 in. steel tubing that is finished with a durable matte black powder coat paint. Along with the grapple rake, you’ll receive hoses and couplers with your purchase.

GREAT FOR LANDSCAPING

If you need to remove debris from your yard, garden, or farm, then this tool is perfect for you! It can help you sift through rocks, roots, logs, brush, and more while returning the valuable dirt to your land. Whether you are moving parts, transporting pipes, or grooming the lawn, you will want to invest in this piece of extremely useful equipment.

SKELETON FRAME

At Titan Attachments, performance is key. That is why this tractor implement is designed with a skeleton frame. It is perfect for clearing rocks and large debris. The skeleton frame allows you to clear your land without hauling the dirt away. Clear out thick brush or heavy debris using this strong rock grapple loader.

REPLACEABLE TEETH

This attachment features teeth that can be easily replaced. This grapple is intended for heavy-duty work. It can dig or pull trees or rocks from the ground. This attachment provides an exceptional grip, so you can get to all those pesky rocks or pull out that irritating brush with ease. The maximum opening height is 35.5 inches.

Product description

The Titan 60" grapple bucket fits John Deere & is ideal for picking up and moving small logs, brush, debris, and other odd shaped or hard to lift. material. Its efficient light weight design will not tax your loader's power allowing you to work faster. The independent grapples make it easy to move difficult and uneven loads. The serrated leading edge provides exceptional grip and can easily tear through small roots and brush. This grapple is not intended for heavier duty, commercial grade work to include digging or pulling trees, rocks, roots from the ground.



Features:

- Fits John Deere loaders (hook and pin).- Top pin set fits H120, D120, 210, 200x, 200cx, 300cx, 300x, 305, 400x, 400cx, 410, 419, 420, 430, 440, & 460 series loaders. - Bottom pin set fits 500, 510, 520, 521, 540, 541, & 542 series Ag loaders.

- Hose spring and protective canvas sleeve keeps the hydraulic hoses from getting pinched when in use

- Hoses and couplers are included

- Twin 3,000 PSI cylinder



Specifications:

- Weight: 565 lb

- Width: 60"

- Opening Height: 25"

- Teeth Length: 30.5"

- Top Teeth Thickness: 1/2"

- Bottom Teeth Thickness: .4"

• Compatible: Fits John Deere Quick tach 200 500 series. See compatibility list below.
• Well Built: 1/2" steel top teeth, .4" bottom teeth, powder coated finish and protected hoses.
• Quality Design: Lightweight design won't tax your loader's power as it rips through brush and handles small trees
• Capacity: up to 3000 lb. carrying capacity
• Convenient Delivery: Make sure to give us your phone number! For the trucking company to schedule delivery. Without it there will be delays.

User questions & answers

Question:	Will this work on a 5403 John deere
Answer:	not sure on 5403 sir I have a smaller unit but I did have to change the hydraulic couplers on my tractor possible your tractor might have the right size the attachment works as it is advertised
Question:	Will this fit a jd 3320 with a 300cx loader
Answer:	Yes, I have it on a 3039 with the 300cx although in retrospect I think I would have gone with the 48
Question:	Will this fit Branson 42 tractor
Answer:	I suggest you call the manufacturer
Question:	Will this fit a h180 loader
Answer:	Try calling the manufacturer. They are very helpful.

Product features

Titan Attachments 60" Root Grapple fits John Deere Loaders

The Titan 60" grapple bucket fits John Deere & is ideal for picking up and moving small logs, brush, debris, and other odd-shaped or hard to lift material. Its efficient lightweight design will not tax your loader's power allowing you to work faster. The independent grapples make it easy to move difficult and uneven loads. The serrated leading-edge provides exceptional grip and can easily tear through small roots and brush. This grapple is not intended for heavier duty, commercial-grade work to include digging or pulling trees, rocks, roots from the ground.

Top pin set fits H120, D120, 210, 200x, 200cx, 300cx, 300x, 305, 400x, 400cx, 410, 419, 420, 430, 440, & 460 series loaders

Bottom pin set fits 500, 510, 520, 521, 540, 541, & 542 series Ag loaders

Hose spring and protective canvas sleeve keeps the hydraulic hoses from getting pinched when in use

Hoses and couplers are included

Product description

This 48" Root Grapple Bucket fits John Deere & has an engineered lighter weight design and is ideal for picking up and moving, surface rocks, logs, brush, debris, or hard to lift. material. It is very durable with gusseted teeth and high strength tube steel cross members. This grapple is not recommended for commercial grade work such as digging and pulling trees, rocks, or roots from the ground.



Features:

- Fits John Deere

- Top pin set fits H120, H130, D120, 210, 200x, 200cx, 300cx, 300x, 305, 400x, 400cx, 410, 419, 420, 430, 440, & 460 series loaders.

- Bottom pin set fits 500, 510, 520, 521, 540, 541, & 542 series Ag loaders.

- Does not fit any loaders equipped with the Global/Euro style or universal Skid Steer style mount.

- Hose spring keeps the hydraulic hoses from getting pinched when in use.

- Greasable pins and bushings

- Couplers that fit John Deere are included

- Single 3,000 PSI cylinder

- Fits John Deere Quick Tach



Specifications:

- Weight: 450 lb.

- Width: 48"

- Opening Height: 34"

- Side thickness: 1/2"

- Teeth Length: 33"

- Teeth Thickness: 3/8"

• Fits John Deere. Top pin set fits H120, H130, D120, 210, 200x, 200cx, 300cx, 300x, 305, 400x, 400cx, 410, 419, 420, 430, 440, & 460 series loaders. Bottom pin set fits 500, 510, 520, 521, 540, 541, & 542 series Ag loaders.
• Does not fit any loaders equipped with the Global/Euro style or Universal skid steer style mount. Hose spring keeps the hydraulic Hoses from getting pinched when in use. Greaseable pins and bushings.
• Couplers that fit John Deere are included. Single 3,000 PSI cylinder Fits John Deere Quick Tach
• Weight: 450 lb Width: 48" Opening Height: 34" Side thickness: 1/2" Teeth Length: 33" Teeth Thickness: 3/8"
• We need your phone number! For the trucking company to schedule delivery. Without it there will be delays.

User questions & answers

Question:	I have a john deere 3032e. the hydraulic couplers on the grapple don't fi the john deere. what couplers do i need to replace the grapple couplers
Answer:	I had to replace mine also. The grapple is amazing!
Question:	Does this grapple fit on a john Deere 1023e? What does top and bottom pin Sets
Answer:	I would need to know what series loader is on your JD 1023e. For you to reference, this grapple fits the loaders listed below. * Fits John Deere * Top pin set fits H120, H130, D120, 210, 200x, 200cx, 300cx, 300x, 305, 400x, 400cx, 410, 419, 420, 430, 440, & 460 series loaders. * Bottom pin set fits 500, 510, 520, 521, 540, 541, & 542 series Ag loaders.
Question:	Where do the hydroulic lines hook up too? I have 4 ports on my 3033r but my loader uses all
Answer:	Two additional lines need to be installed with a separate valve. I had the dealer install the extra lines when I purchased my tractor.
Question:	will this work on a Kubota
Answer:	No, this grapple is designed to fit the John Deere Quick Connect system on 200, 300, 400, and 500 series loaders.

Product description

The Titan 60" grapple rake is ideal for picking up and moving, rocks, logs, brush, debris, and other odd shaped or hard to lift. material. The extra wide opening of the rake style grapple makes pushing and gripping large loads an ease.

• Universal skid steer style hookup Greasable pins and bushings
• Hoses and flat faced couplers are included Twin 3,000 PSI cylinder
• Weight: 675 lbs Width: 60"
• Opening Height: 48" Side Thickness: 1/2" Teeth Length: 24" Teeth Thickness: 1/2"
• We need your phone number! For the trucking company to schedule delivery. Without it there will be delays.

User questions & answers

Question:	Will it fit a 2019 Bobcat ToolCat
Answer:	It fit myJohn Deere skid loader and my L series Kaboda.
Question:	If i order one and have it delivered to my house i can unload it with my bobcat is that possable
Answer:	You sure can. I unloaded mine with a skid steer.
Question:	Does it fit on a 2018 kubota l3301hst tractor? do the hydralic lines connect without modifications to the tractor or grapple rake
Answer:	Check the lifting capacity of the tractor. I had to run two hydraulic lines from the back with my Branson.
Question:	Is this too heavy for a new Holland boomer
Answer:	I have a 57hp Branson. I believe it's lifting capacity is over 3200lbs. Its been over 3yrs since I checked. It has no problem picking up the grapple with a large load of branches like 8-10 pieces of 6 in diameter and 12 ft long. This is my most useful tractor implement. I use it to pick up and move other implements. The teeth will go about 6in below ground level. You can bulldoze out brush and small trees by the roots.

Product features

Titan Attachments 60" Skid Steer Root Grapple Rake V2 Attachment

The Titan 60" grapple rake is ideal for picking up and moving, rocks, logs, brush, debris, and other odd-shaped or hard to lift material. The extra-wide opening of the rake style grapple makes pushing and gripping large loads an ease

UNIVERSAL SKID STEER STYLE HOOKUP

GREASABLE PINS AND BUSHINGS

HOSES AND FLAT FACED COUPLERS ARE INCLUDED

TWIN 3000 PSI CYLINDER

• Grab and clear out unwanted rocks and other debris while allowing valuable dirt to sift through the rock bucket tines and return to your land!
• Fit: Universal Skid Steer Attachment
• Extreme Duty Construction: Frame built with 3" x 3"steel tubing; Rock Bucket and Grapples both made from extreme duty 1/2" steel
• Components: 1" x 82" Cutting Edge with 6 Cast Teeth; 17 half inch thick solid steel tines, 2 hydraulic cylinders 2.5" bore x 8" stroke hoses and couplers included!
• Dimensions: 49" from back of frame to end of teeth; 4" tine spacing, 82" actual inside bucket width, 14.5" deep from top of bucket to the top of tines

User questions & answers

Question:	Does this come Euro Euro style hookup
Answer:	Bought one, used it less than 2 hours. Left grapple ripped out of the frame!! I bought this one because of its total weight, however the frame that everything is attached to is super thin and poorly braced!! Company replaced with new one but it took well over a month and I had to pay shipping to return the original!! Would not recommend this bucket!!!!

Product features

Titan Attachments 82" Rock Bucket Grapple Skeleton Loader with Teeth

The 82" Rock Grapple bucket from Titan Attachments is perfect for grabbing and clearing out unwanted rocks and other debris while allowing valuable dirt to sift through the rock bucket tines and return to your land! The heavy-duty skeleton frame of the bucket provides the durability needed for most demanding jobs and in the toughest conditions. Frame built with 3” x 3” steel tubing; Rock Bucket and Grapple both made from extreme duty 1/2" steel. The integrated step in the center of the bucket allows for easy, slip-free entry to your skid steer.

SKID STEER QUICK TACH

DURABLE POWDER COATED FINISH

REPLACEABLE TEETH

OPEN TINE BOTTOM FOR SIFTING DEBRIS

Search ASIN B086T5YHFD

Titan Attachments LW80 OEM Bucket Tooth Kit With Shank Tooth Side Pin And Retainer | Single

Search ASIN B086T6KT5N

Titan Attachments LW80 OEM Bucket Tooth Kit With Shank Tooth Side Pin And Retainer | 3 Pack

Search ASIN B086T4TJHF

Titan Attachments LW80 OEM Bucket Tooth Kit With Shank Tooth Side Pin And Retainer | 5 Pack

• UNIVERSAL SKID STEER HOOKUP: This root grapple bucket is built with a universal skid steer hookup, allowing it to attach to several different models of Bobcat haulers. With your purchase, youll receive easytogrease pins, bushings, hoses, and flatfaced couplers to help ease installation. In no time, youll be able to set up your brand new clamshell attachment!
• UNIVERSAL SKID STEER HOOKUP: With its universal skid steer hookup, this attachment is compatible with most makes and models of tractors and haulers, including Bobcat and Caterpillar. Additionally, its neutral black color scheme will complement your machinery. Not only will your attachment work great, but it will also look great! Add it to your tractor parts and implements today.
• GREAT FOR LANDSCAPING: If youre looking to beautify your yard, consider this handy root grapple rake attachment! It is ideal for picking up and moving rocks, logs, brush, debris, and other oddshaped material. This attachment also features an extrawide opening that makes pushing and gripping large loads easy.
• TWIN 3000 PSI CYLINDER: To help your tractor operate smoothly, this attachment utilizes a twin 3000 PSI cylinder. Its convenient cylinder assists in providing powerful lifting capability, so you can move and transport heavy objects. Clear out your yard or other property using this strong root grapple rake.
• DIMENSIONS: This grapple rake weighs approximately 855 lbs. It has a width of 84" with an opening height of 48". The teeth of the grapple rake measure at 24" in length and are 0.5" thick. This attachment has an overall side thickness of 0.5".

User questions & answers

Question:	Will this work on a Kabota quick attach? I have a grande L 33 hp quick detach connection for a 72 inch bucket and pallet forks
Answer:	I have an iPhone 6 and it fits good do it should fit yours.

Product features

Titan Attachments 84" Skid Steer Root Grapple Rake v2 Loader Clamshell Attachment

For efficient debris removal, trust this clamshell root grapple rake by Titan Attachments. Thanks to its extra-wide opening, this useful tool will grasp rocks, logs, brush, debris, and other heavy material with ease. Soon, your lawn will look immaculate with the help of this clamshell root grapple rake. Its universal skid steer hookup makes it easy to install. You’ll also get easy-to-grease pins, bushings, hoses, and flat-faced couplers to make assembly even simpler. This attachment is specifically designed for Bobcat loaders. It also comes in an attractive, sleek black color that will complement your farming equipment. Part of what makes this machinery so efficient is its twin 3000 PSI cylinder. This powerful cylinder lends itself to some serious heavy-lifting power. It also helps the machine run smoothly without taxing your loader as you grapple odd-shaped materials. The width of this product is 84” and the opening height is 48”. The teeth have a length of 24” and are 0.5" thick.

UNIVERSAL SKID STEER HOOKUP

This root grapple bucket is built with a universal skid steer hookup, allowing it to attach to several different models of Bobcat haulers. With your purchase, you’ll receive easy-to-grease pins, bushings, hoses, and flat-faced couplers to help ease installation. In no time, you’ll be able to set up your brand new clamshell attachment!

GREAT FOR LANDSCAPING

If you’re looking to beautify your yard, consider this handy root grapple rake attachment! It is ideal for picking up and moving rocks, logs, brush, debris, and other odd-shaped material. This attachment also features an extra-wide opening that makes pushing and gripping large loads easy.

TWIN 3000 PSI CYLINDER

To help your tractor operate smoothly, this attachment utilizes a twin 3000 PSI cylinder. Its convenient cylinder assists in providing powerful lifting capability, so you can move and transport heavy objects. Clear out your yard or other property using this strong root grapple rake.

Product description

The Titan 72" grapple bucket fits John Deere & is ideal for picking up and moving small logs, brush, debris, and other odd shaped or hard to lift material. Its efficient light weight design limits the tax on your loader's power allowing you to work faster. The independent grapples make it easy to move difficult and uneven loads. The serrated leading edge provides exceptional grip and can easily tear through small roots and brush. This grapple is not intended for heavier duty, commercial grade work to include digging or pulling trees, rocks, roots from the ground.



Features:

- Fits John Deere hookup

- Protective canvas sleeve keeps the hydraulic hoses from getting pinched when in use

- Hoses and couplers are included

- Twin 3,000 PSI cylinders



Specifications:

- Weight: 621.7 lb

- Width: 72"

- Opening Height: 25"

- Teeth Length: 30.5"

- Top Teeth Thickness: 1/2"

- Bottom Teeth Thickness: .4"

- Top pin set fits H120, D120, 210, 200x, 200cx, 300cx, 300x, 305, 400x, 400cx, 410, 419, 420, 430, 440, & 460 series loaders.

- Bottom pin set fits 500, 510, 520, 521, 540, 541, & 542 series Ag loaders.



Compatible: Fits John Deere Quick Tach 200 - 500 series. See compatibility list below.

Well Built: 1/2" steel top teeth, .4" bottom teeth, powder coated finish and protected hoses.

Quality Design: Lightweight design won’t tax your loader’s power as it rips through brush and handles small trees.

Capacity: Up to 3000 lb. carrying capacity.

• Compatible: Fits John Deere Quick Tach 200 500 series. See compatibility list below.
• Well Built: 1/2" steel top teeth, .4" bottom teeth, powder coated finish and protected hoses.
• Quality Design: Lightweight design won't tax your loader's power as it rips through brush and handles small trees
• Capacity: up to 3000 lb. carrying capacity
• Convenient Delivery: Make sure to give us your phone number! For the trucking company to schedule delivery. Without it there will be delays.

User questions & answers

Question:	Will it work on a John Deere 220R compact tractor without additional devices
Answer:	It’d probably work but I can’t really answer this question without knowing how your tractor is set up. You will need a hydraulic remote run to the end of your loader. Depending on what size and style of fittings you have on your hydraulic remote lines, you may need to change them to fit the fittings on the grapple. I’m sure you could make it work fairly easily but I think it would be very big for your loader. I have a 4052R with an H180 loader and it is just about right for my machine (maybe just a bit on the grapple being too big side).
Question:	I have a jd 4044. i am curious what size hydraulic connectors come with the hoses attached? will they fit jd connections
Answer:	They are the same size as what u have on the rear of the tractor. I love my grapple best price of equipment I ever bought for a tractor, and I have quite a bit of it.
Question:	Will this fit a jd 4052 tractor H
Answer:	I have it on a 2018 JD 2032R and I can tell you its heavy duty. I think I should of bought the 60" model. Works and lifts but is straining.
Question:	Will it fit a John Deere D170 quick attach
Answer:	Not enought tractor

Product features

Titan Attachments 72" Root Grapple Bucket fits John Deere Tractor Loader

The Titan 72" grapple bucket fits John Deere & is ideal for picking up and moving small logs, brush, debris, and other odd-shaped or hard to lift material. Its efficient lightweight design limits the tax on your loader's power allowing you to work faster. The independent grapples make it easy to move difficult and uneven loads. The serrated leading-edge provides exceptional grip and can easily tear through small roots and brush. This grapple is not intended for heavier duty, commercial-grade work to include digging or pulling trees, rocks, roots from the ground.

Convenient Delivery: Make sure to give us your phone number! For the trucking company to schedule delivery. Without it, there will be delays.

FITS JOHN DEERE HOOKUP

PROTECTIVE CANVAS SLEEVE KEEPS THE HYDRAULIC HOSES FROM GETTING PINCHED WHEN IN USE

HOSES AND COUPLERS ARE INCLUDED

TWIN 3000 PSI CYLINDERS

Product description

The 6 Foot Root Grapple Rake Attachment by Titan Attachments features an extra-wide rake opening style grapple with long tines for digging and ripping roots out of the soil. This clamshell, root grapple rake design is compatible with John Deere loaders featuring a hook and pin connection. The implement includes twin 3,000 PSI cylinders, which guarantees serious heavy-lift.ing power. For your convenience, we have included greaseable pins, bushings, hoses, and couplers. The Root Grapple Rake is an excellent landscaping tool, as it provides a superior and more efficient way to topple dead trees, dig up roots, and remove large boulders and other heavy objects. It can also be a handy tool for farming or any heavy lift.ing.



NOTE: When you order this grapple rake, you will need to provide your phone number so the trucking and shipping company can schedule delivery.



FEATURES:

- Compatible with John Deere Hook and Pin

- Top pin set fits: H120, D120, 210, 200x, 200cx, 300cx, 300x, 305, 400x, 400cx, 410, 419, 420, 430, 440, and 460 series loaders

- Bottom pin set fits: 500, 510, 520, 521, 540, 541, and 542 series Ag loaders

- Twin 3,000 PSI cylinder

- Greaseable pins and bushings

- Hoses and Pioneer couplers are included



SPECIFICATIONS:

- Opening Height: 47-in.

- Closed Height: 38.4-in.

- Overall Length: 72-in.

- Overall Depth: 25.5-in.

- Side Thickness: 0.5-in.

- Teeth Thickness: 0.5-in.

- Top Teeth Length: 24-in.

- Bottom Teeth Length: 20-in.

- Finish: Powder-Coated Green

- Material: Steel

- Product Weight: 815 lb.

• HOOK AND PIN CONNECTION: This grapple bucket fits John Deere tractors equipped with the hook and pin carrier. Top pin set fits H120, D120, 210, 200x, 200cx, 300cx, 300x, 305, 400x, 400cx, 410, 419, 420, 430, 440, and 460 series loaders. The bottom pin set fits 500, 510, 520, 521, 540, 541, and 542 series Ag loaders.
• TWIN 3,000 PSI CYLINDER: To help your tractor operate smoothly, this attachment utilizes a twin 3,000 PSI cylinder. Its convenient cylinder assists in providing powerful lifting capability, so you can move and transport rocks, logs, brush, debris, and other heavy objects. Clear out your yard, using this strong root grapple rake.
• GREAT FOR LANDSCAPING: If you are looking to beautify your yard, consider this handy Root Grapple Rake Attachment. It is ideal for picking up and moving rocks, logs, brush, debris, and other odd-shaped material. This attachment also features an extra-wide opening that makes pushing and gripping large loads easy.
• DIMENSIONS: The 72-inch Root Grapple Rake Attachment features an extra-wide rake opening style height of 47-inches. The structure is built with 0.5-inch side and tooth thickness with the top teeth measuring 24-inches long and the bottom measuring 20-inches. The implement weighs 815-pounds.
• NOTE: When you order this grapple rake, you will need to provide your phone number so the trucking and shipping company can schedule delivery.

Product description

The Titan 84” Heavy Duty Root Grapple is designed to fit John Deere loaders and is ideal for picking up and moving rocks, logs, brush, debris, and other oddly shaped or hard to lift materials. The extra-wide opening of the rake style grapple makes pushing and gripping large loads easy. This includes the connections, pins, bushings to fit John Deere loaders. Check below to see a list of compatible loader series.



Features:

- Fits John Deere loaders.

- Top pin set fits: H120, D120, 210, 200x, 200cx, 300cx, 300x, 305, 400x, 400cx, 410, 419, 420, 430, 440, & 460 series loaders.

- Bottom pin set fits: 500, 510, 520, 521, 540, 541, & 542 series Ag loaders.

- Greasable pins and bushings 

- Twin 3,000 PSI cylinders 

- Hoses, pioneer-style couplers, & bucket teeth included 

- Does not fit any loaders equipped with the Global/Euro style or universal Skid Steer style mount



Specifications:

- Weight: 1,152 lb

- Opening height: 48"

- Teeth length: 24"

- Bottom teeth: 20"

- Width: 41"

- Material: Heavy duty steel

- Color: Green

• Compatibility: Fits John Deere loaders; check below for full list of pin sets that will work
• Durability: Made of thick HD steel that stands up to tough jobs
• Value: High quality materials for less than dealer price
• Usage: Make short work of digging rocks, picking up brush, etc.
• We need your phone number! For the trucking company to schedule delivery. Without it there will be delays.

User questions & answers

Question:	I have a 3rd function switch on my JD hydraulic control, does that operate both cylinders on this equipment
Answer:	yes it does

Product features

Titan Attachments 84" HD Root Grapple Rake Attachment fits John Deere Loaders

The Titan 84” Heavy Duty Root Grapple is designed to fit John Deere loaders and is ideal for picking up and moving rocks, logs, brush, debris, and other oddly shaped or hard to lift materials. The extra-wide opening of the rake style grapple makes pushing and gripping large loads easy. This includes the connections, pins, bushings to fit John Deere loaders. Check below to see a list of compatible loader series.

FITS JOHN DEERE LOADERS

TOP PIN SET FITS: H120, D120, 210, 200x, 200cx, 300cx, 300x, 305, 400x, 400cx, 410, 419, 420, 430, 440, & 460 SERIES LOADERS

BOTTOM PIN SET FITS: 500, 510, 520, 521, 540, 541, & 542 SERIES AG LOADERS

DOES NOT FIT ANY LOADERS EQUIPPED WITH THE GLOBAL/EURO STYLE OR UNIVERSAL SKID STEER STYLE MOUNT

Search ASIN B086T5YHFD

Titan Attachments LW80 OEM Bucket Tooth Kit With Shank Tooth Side Pin And Retainer | Single

Search ASIN B086T6KT5N

Titan Attachments LW80 OEM Bucket Tooth Kit With Shank Tooth Side Pin And Retainer | 3 Pack

Search ASIN B086T4TJHF

Titan Attachments LW80 OEM Bucket Tooth Kit With Shank Tooth Side Pin And Retainer | 5 Pack