10 best gas powered transfer pumps

Product description

The Champion Power Equipment 66520 2-inch Semi-Trash Gas-Powered Water Transfer Pump with Hose and Wheel Kit comes with everything you need to start pumping (just add oil and gas). Capable of passing solid waste up to 9/16 of an inch in diameter, this transfer pump is the perfect solution for moving water quickly and efficiently. Whether you are draining or refilling your swimming pool, removing water from your basement or draining shallow flooded areas, this unit features a self-priming design that holds prime even when it’s not running (requires initial priming to operate). This lightweight and portable transfer pump has a maximum delivery volume of 158 gallons per minute and is capable of passing solid waste up to 9/16 inch in diameter. With a 2-inch NPT inlet and NPT 2-inch outlet, this unit has a total head of 98 feet and a suction head of 26 feet. The complete hose kit provides everything you need to get your pump into action, including a 12-foot intake hose, a 20-foot discharge hose, cam action quick coupler, intake strainer, hose clamps, outlet hose adapter, outlet hose fitting and teflon tape. Champion’s reliable 196cc single-cylinder OHV engine has a 0.9-gallon fuel tank and 0.6-quart oil capacity (recommended 10W-30) and provides plenty of power for you to move water with confidence and efficiency. Transport your pump from one job to the next with ease thanks to the foldaway handle and never flat tires in the included wheel kit. The shaft seals are made of sturdy silicone carbide. The lightweight and durable steel frame along with this unit’s compact design make it convenient to store your pump until the next time you need it. This water transfer pump is EPA certified and CARB exempt. Buy with confidence - Champion Support and our nationwide network of service centers will back your purchase up with a 2-year limited warranty and FREE lifetime technical support.

• Dimensions: 25.0" L x 20.8" W x 19.2" H | Weight: 66.1 lb
• Complete Setup – Everything you need to start pumping - 12-foot intake hose, 20-foot discharge hose, cam action quick coupler, intake strainer, clamps, fittings and adapters (just add oil and gas)
• Efficient – 158 gallons per minute maximum delivery powered by a 196cc Champion engine with a 0.9-gallon fuel tank and 0.6-quart oil capacity
• Semi-Trash – Capable of passing solid waste up to 9/16 inch in diameter, this pump has a 2-inch inlet, a 2-inch outlet, total head of 98 feet and suction head of 26 feet
• Convenient – Featuring a durable steel frame, handle and wheel kit with never-flat tires, this pump is easy to move from one job to the next and a cinch to store
• Champion Support – Includes 2-year limited warranty with FREE lifetime technical support from dedicated experts.Impeller Material:Aluminum

User questions & answers

Question:	I have a 12 Ft. Deep pond I want to pump out. How far down can I pump it with this. How well will this pump suction when pulling water up hill. Thanks
Answer:	the intake will hang about 11 ft down into your pond...but depending on how high up the hill is...that is where you might find problems..the grade of the hill is important as well as who long the hose going up the hill is..if your hill is 25 long and it is 10 feet higher then where your pump is..that is about the limit..what you will find is you will lose "prime"..this is the suction of the pump..and the pump may overheat causing it to shut down.
Question:	will this water pump work for me to pump water out of the lake on to my grass
Answer:	I use one of these regularly and the answer to your question as asked is yes, it will move 158 gallons of water a minute from the lake onto your grass. The pump will have to be close enough to the lake for the end of the pickup tube to be submerged in the water and there are some vertical limitations as to how high the pump can be above the lake - check the specs. Once the water gets to the pump, you've got to figure out how to handle it. It's quite a stream if the motor on the pump is cranked up. We use a 50' flexible extension in addition to the included output hose and just hold the end in our hands like a fire hose - it's hard, wet work. But it does move a lot of water and fills our need perfectly.
Question:	Where is it made? Thanks
Answer:	Apparently it is made in China for Champion Power Equipment 10006 Santa Fe Springs Road Santa Fe Springs, California.
Question:	Is this pump self-priming
Answer:	No, you have to prime it. The priming process is very easy though. I just dip a bucket into the ditch where I'm pumping from and fill up the chamber. I've thought of having another funnel to use when I pour the water in, but it really isn't necessary.

Product features

Champion 2-Inch Gas-Powered Semi-Trash Water Transfer Pump with Hose and Wheel Kit

Champion’s 2-inch Chemical Water Transfer Pump is designed for fast, efficient pumping. This unit will pump 154 gallons of water a minute and is powered by a 196cc Champion engine. With clear water fittings and constructed of chemical resistant materials, this unit is your perfect pumping solution.

Key Features

• EPDM Rubber O-ring

• Fiberglass Reinforced Polyester Pump Housing, Impeller and Volute for Chemical Resistance

• Fuel Tank – 0.9 Gallon (3.4 L)

• Diameter of Inlet and Outlet – 2 in. NPT (5 cm)

• Total Head – 115 ft. (35 m)

• Suction Head – 25 ft. (7.5 m)

• Max Delivery Volume – 154 gal/min (583 L/min)

• Durable steel frame

Easy To Operate

All of the Champion products are designed with ease of use in mind. Robust, simple to operate and easy to maintain.

Multiple Uses

Multitasking is a part of life and our products are made to offer multiple effective solutions for an array of different domestic power needs.

Lightweight

We know that sometimes you need power on the go. Champion products are designed to produce the highest level of performance in the smallest package possible.

Product description

DC HOUSE Gas Water Transfer Pump Move huge volumes of water with this smooth running, easy starting, long lasting pump. Use to drain a pool in no time, empty a flooded basement, pump out a flooded trench, fill or empty a water storage tank or reservoir, irrigate a field, hose down a construction site, help drain a levy breach and more.



Feature



DC HOUSE 6.5 HP air cooled O.H.V gasoline engine.



2-Inch inlet and discharge connections



Priming sort and stainless steel shaft



NPT (national pipe thread) threads for easy connections



Can be used for draining pools, lakes, dredging, to floods and more



Includes accessories for easy operation



Ease of use: anyone can use it - easy -pull recoil start system allows for simple startup without multiple pulls



Functionality: pump out a flooded trench, fill or empty water storage tanks, irrigate fields and more



Move volume quickly capable of emptying a 40,000 gallon pool in about a dismal 4.5 hours



*Hose Not Included*



Need to move some water? The Heavy Duty Gasoline Powered Water Pump perfect for your needs.

• ➪ 2" General Purpose Water Pump: - Designed for clear water removal.6.5HP 160CC engines superior reliability and performance.Moves a lot of water up to158 gallons per minute,It even suck up a bit of sludge, but for longevity purpose I would recommend, to try and avoid that situation. The more water in the mixture, the better results.
• ➪ WORKS GREAT: FUEL EFFICIENT, HIGH OUTPUT OPERATION:Precision camshaft design offers precise valve timing and optimal valve overlap for better fuel efficency，OHV design for increased efficiency and optimal power transfer.Gas powered Engine 25:1(Gasoline 25: Two-cycle Oil 1)
• ➪Aluminum Pump Housing & Cast Iron Impeller - Extends the life of the pump
• ➪ COMMON APPLICATIONS: Irrigate acre of lawn,garden and general use,Community Semi-Trash Clean ground Pond Water Remove.
• ➪ EASY TO USE AND MAINTAIN: Simple throttle control,Easy, convenient, heavy duty control box,Easily accessible spark plug,Large fuel tanks,automotive type fuel cap.

Product features

High Performance, Long Lasting Pumps

Durable and Efficient

The DC HOUSE Semi-Trash Water Pump is a versatile workhorse ready to tackle a variety of jobs. To ensure the best performance, longer life and smoother operation, we gave this heavy-duty water pump a cast iron impeller and volute to increase pump life in semi-trash situations. We also added a multi-directional discharge that puts fluids where you want them.

Handles the Toughest Jobs

The high-end silicone carbide mechanical seals in this DC HOUSE Semi-Trash Water Pump are harder, tougher and stronger than common aluminum oxide seals and have superior resistance to corrosion, wear and heat so you can use it in all kinds of situations. It also has our cutting-edge check valves that hold a prime when the pump is not running to quickly get you back up and pumping.

Proven and Reliable Power

Dependable Engineering

Because you need a pump that you can rely on, turning to the world's largest manufacturer of engines to power our DC HOUSE Semi-Trash Pump was an obvious choice. The 160 cc 6.5 HP air cooled O.H.V gasoline engine gives you the fuel efficiency, quiet operation and most importantly, power that you need to get the job done.

Easy to Work With

The precision-engineered components that come together to form this DC HOUSE Semi-Trash Pump's 160 cc 6.5 HP O.H.V gasoline engine engine let it run with less vibration and less noise, so they're a lot better to be around than some other engines. They're also built to last with minimal maintenance, so you'll stay on the job with less trouble.

Features + Benefits

• Long-life silicon carbide mechanical seal resists corrosion, wear and heat better than a standard seal
• Multi-directional discharge
• 23-ft. max. suction lift
• Cast iron impeller and volute last longer for semi-trash operations
• Silicon carbide seals are 2 times harder, 15% tougher, and 50% stronger than common aluminum oxide seals
• Uses standard NPT threads for attachment flexibility
• Utilizes a check valve to hold a prime while the pump is not running
• Fully welded industrial 1 3/8in. steel roll cage with durable black wrinkle TGIC polyester electrostatic finish holds up to jobsite abuse
• Full frame protection
• All sheet metal parts are cut using a state of the art CO2 laser
• Includes strainer

Setting the Standard for Quality, Performance and Value

Over 1000 Hours of Testing

No one builds water pumps better. And no one tests them more. DC HOUSE Tool + Equipment engineers put each DC HOUSE water pump component through a series of extensive, real-world procedures testing facility and in the field. Each pump design is endurance-tested nonstop for over 1000 hours. Before you put your pump to the test for the first time, we already have.

• The World's First Rechargeable Fuel Transfer Pump, 2900 mAH Lithium-Ion Samsung Battery - Full Charge within 5 hours or less with a Micro-B Cable
• Flow Rate of Up to 2.85 Gallons per Minute with 15 to 20.5 inch Telescopic Suction Tube - Dispenses 80 Gallons on a Full Charge
• There are millions of wasted Micro-B cables in the world. To help reduce E-Waste & carbon emissions, no Micro-B Cable is included in our product.
• 10ft Discharge Hose with 11.5 inch Flow Nozzle provides flexibility to Fuel from greater distances - Transfers Gasoline, Diesel, DEF/ AdBlue, Non-Potable Water, Kerosene, Antifreeze, Windshield Washer Fluid, Mild Detergents, Agricultural Chemicals & Light Oils
• Flow Nozzle provides greater flexibly - Simply squeeze the Nozzle or Twist Clockwise for Longer Fueling Sessions - Tera Pump products are made to be versatile, strong and backed by a 1 Year Warranty on Defects

• STOP LIFTING HEAVY CANS | Flexible System Finally Gives Your Back a Break | Operate the Pump with One Hand or 100% Hands-Free—No Heavy Lifting! | Extra Long Transfer & Suction Tube Easily Reaches Inside High Cans, Big Water Jugs & Other Large Tanks, While the Oversized Transfer Hose Provides Further Length & Reach
• 3X MORE POWERFUL D BATTERY OPERATED | Insert two D 1.5V batteries (not included) into the compartment and enjoy hours of dependable liquid transfer—anywhere in the world! Great for filling up off-road vehicles, lawn equipment and more
• SUPER FAST SUCTION PERFORMANCE | With Just [2] D 1.5V Batteries, Move Any Compatible Liquid at Lightning Speed! | Pump Performs Faster Than Most Competitors at Rate of 2.3 Gallons Per Minute—Perfect for Swift Siphoning on the Side of the Road, in the Field, On the Job or in the Driveway | RoHS & CE Certified
• POWERFUL ALL-PURPOSE TRANSFER HOSE | Portable Device Allows You to Siphon & Transfer All Kinds of Non-Corrosive Liquids & Fuels with the Flip of a Switch! | For Use with Gasoline, Kerosene, Diesel, Light Oils, Non-Potable Water, Chemical Insecticides, Soaps, Detergents, Deodorants, Mild Acids, Antifreeze & Beyond
• PROFESSIONAL & EVERYDAY APPLICATIONS | Go-To Device for Anyone in Need of Stress-Free Fuel or Liquid Transfer | Use to Fill Up or Empty Your Emergency Generator, Riding Lawn Mower, Yard & Garden Equipment, Utility & ATV Vehicles, Construction Machinery, Cars, Motorcycles, RVs, Cleaning Equipment & More!

User questions & answers

Question:	How long is the "extra long" transfer tube that goes from fuel can up into tractor fuel tank
Answer:	Rubber hose...same as in your auto.
Question:	Have a lot of diesel to get out of these fuel tanks, does this work good with diesel
Answer:	Dear ,the inside diameter is 0.021inch ,you can see the pictures ,and select one you need.
Question:	Is this made in the USA
Answer:	Yes but it is very slow
Question:	does it have a filter
Answer:	Yes, maybe divide 6 times, don’t use too much at once

Product features

Easy To Use

Power Switch turns the pump on and off with one simple button.

Extended Tube & Hose

The main suction tube and transfer hose are designed for maximum reach, so you can easily siphon from big 5-gallon water jugs or bulky jerrycans into high-up vehicles or machinery tanks.

Swift Transfer Speeds

Handle high volume jobs without the wait. The pump transfers liquid at a rate of 2.6 gallons per minute—just slightly slower than the actual gas pump! Great for home and onsite applications.

Portable Battery Operation

Insert two D 1.5V batteries (not included) into the compartment and enjoy hours of dependable liquid transfer—anywhere in the world! Great for filling up off-road vehicles, lawn equipment, and more.

Skip the Seal

No external parts or accessories required. Once the hose and tube are in place, liquid flows without a single splash. Designed for use with gas, kerosene, diesel, light oils, non-potable water, and more.

Narrow Tube Diameter

Inserts into any size gas can, bucket, tank or vessel; siphons out liquid for transfer to final location.

Product description

The flexible intake hose that's equipped with the TRFA01 provides more flexibility at getting that last drop of fuel in your can. It fits most fuel can sizes and effectively reduces wasted fuel allowing a pleasant transfer process. The TRFA01 comes with three different-sized adapters to give a tight and clean fit, ensuring that there will be no fume or gas leakage. The built-in advanced auto-stop feature automatically stops when the transfer process is complete; just sit back and watch it work!

• Rain-Resitant Cover / Transfer to gas can / vehicle/ lawn mower and more!
• 2.4 Gallons per Min / Use 4 AA batteries (NOT included) / Flexible Intake hose / No-spill Auto-Stop Nozzle
• Does not fit FMD style Gas Cans / Fits Most North American Fuel Plastic Cans with 3 different sized adapters (included)
• No need to remove pump from gas can after use / Leave the pump attached and store away after use / No Worries No Mess No Hassle - Sit Back and Relax!
• CSA Certified under UL Standards. This product was tested by CSA per an agreement with UL, and is certified for use in both Canada and the US according to applicable Canadian and US standards

User questions & answers

Question:	can I use this to transfer milk from a holding tank into bottles? can i clean the tubes easily after
Answer:	In my experience ...yes. Holding the hose vertical for a few seconds drains the residual back into the can.
Question:	Does this need gravity to work or does a motor draw it up out of the fuel can
Answer:	I've used my Tera pump twice to fill my Pontoon boat from a five gallon can. Each time, I stopped the pump after 3 minutes to prevent overheating the mechanism (even though the pump never got warm). I emptied the five gallon can in about five minutes. This pump is awesome.
Question:	I have a 330 gallon tote that I use to water the garden. I want to add enough pressure to operate a sprinkler. Will it push enough water
Answer:	It pumps at one speed but the one-off switch is like a push button and responds to off quickly. Any gas left in the line drains back into the can when the nozzle is raised higher then the can. I used it all summer (about 75 gallons of gas) on a boat and didn't spill a drop.
Question:	Do they sell other adapters? Two were too small tans one was too large
Answer:	I’m sure you can. It pumps gasoline easily and the DEF fluid is water I think

Product features

About Tera Pump

Since 2009, we've been pumping innovation into liquid transfers pumps. Through continued innovation and design Tera Pump's products eliminates the lifting of large, heavy, gas cans and spilling wasted fuel. Our exclusive design makes transferring fuel to cars, trucks, off road vehicles, boats, mowers and more, painless and hassle free.

Battery Powered Gas Can Pump

[ Features ]

• Flow Rate of up to 2.4 Gallons per Minute
• Works with Any non-corrosive liquids such as gasoline, non-potable water (non-drinking), kerosene, diesel or light oils
• Water-Resistant Battery Cover for accidental fuel spills
• Auto-Stop System to prevent fuel loss or accidental spills
• Refuel boats, ATVs, motorcycles, cars, generators, lawn mowers and more!

[ How to use ]

• Find the adapter that is the best fit and make sure it is fastened tightly to your supply tank
• Insert intake hose through the adapter and fasten the pump's joint nut tightly
• Attach the discharge hose to your receiving tank using the clip, make sure the discharge nozzle is in a vertical position
• Start the flow of fuel by pressing the ON button
• After automatically stopping, bring the discharge hose up above the tank to drain the excess fuel or liquid back into the supply tank
• Put the discharge nozzle in discharge nozzle compartment and local into place with clip

• ✅ Improvements and Updates: Longer hose (25" to 35") / More Powerful Motor (20% up) / Fuel More Resistant Plastics
• ✅ 2019 Update: Power Cover that is Rain Resistant / Auto-Stop Sensor Moved to Increate the Flow by up to 10%
• ✅ 2.4 Gallons per Min / Use 4 AA batteries (NOT included) / Flexible Intake hose / No-spill Auto-Stop Nozzle
• ✅ Does not fit FMD Gas Cans / Fits Most North American Fuel Plastic Cans & with 3 different sized adapters (included) / No Worries No Mess No Hassle - Sit Back and Relax! (Gas Can NOT Included)
• ✅ CSA Certified under UL Standards. This product was tested by CSA per an agreement with UL, and is certified for use in both Canada and the US according to applicable Canadian and US standards

User questions & answers

Question:	Is there any way to make the filler hose longer
Answer:	If you are referring to the belly tank on the trailer for the reefer, it should work for that. Keep in mind that the lift will be governed by the discharge hose so the worst case scenario would be to set the supply tank on a raised block of some sort. Thanks,
Question:	Is there a adapter to fit a gas caddy or gas walker
Answer:	I fill my boat......the gas can is on dock, the boats gas fill is a foot or two above top of gas can. The pump works fine. What they are saying is you can't take the gas hose, go straight up with the hose to fill something 4 feet higher than gas can. When people say no lifting, what they mean is they are not standing over what they are filling, holding gas can while pouring gas in. If I want to fill my portable generator, the gas fill on it is approx. 3 feet off ground. I will take my 6 gal. gas can with pump, and lift it up and set it on a milk crate, or my shop stool, or whatever brings gas can up and can support it safely. I then take pump hose and put in generator, press button and walk away. I'm not standing over generator holding gas can and pouring gas in. That's what no lifting means.
Question:	The supply tank and the receiving tank must be at the same level to pump fuel
Answer:	No the suction tube on this pump can not remove gas from a car. Only way it MIGHT be possible, is if the fuel tank was dropped down from the vehicle and the pump was inserted from where the float for the fuel tank is located on top.
Question:	what is the diameter of the pump part that drops into the gas can
Answer:	Yes, sir. That is what I use it for in detecting moisture in boat hulls and decks. It works very well.

Product description

ECO LLC Gas Water Transfer Pump Move huge volumes of water with this smooth running, easy starting, long lasting pump. Use to drain a pool in no time, empty a flooded basement, pump out a flooded trench, fill or empty a water storage tank or reservoir, irrigate a field, hose down a construction site, help drain a levy breach and more.



Feature



ECO LLC 6.5 HP air cooled O.H.V gasoline engine.



2-Inch inlet and discharge connections



Priming sort and stainless steel shaft



NPT (national pipe thread) threads for easy connections



Can be used for draining pools, lakes, dredging, to floods and more



Includes accessories for easy operation



Ease of use: anyone can use it - easy -pull recoil start system allows for simple startup without multiple pulls



Functionality: pump out a flooded trench, fill or empty water storage tanks, irrigate fields and more



Move volume quickly capable of emptying a 40,000 gallon pool in about a dismal 4.5 hours



*Hose Not Included*



Need to move some water? The Heavy Duty Gasoline Powered Water Pump perfect for your needs.

• ➪ WORKS GREAT: FUEL EFFICIENT, HIGH OUTPUT OPERATION:Precision camshaft design offers precise valve timing and optimal valve overlap for better fuel efficency，OHV design for increased efficiency and optimal power transfer.
• ➪ GOOD VALUE: 6.5HP 160CC engines superior reliability and performance.Moves a lot of water up to158 gallons per minute,It even suck up a bit of sludge, but I would recommend, for longevity purpose, to try and avoid that situation. The more water in the mixture, the better results. Cleaning the pump area afterwards is recommended.Its easy enough to clean them out.
• ➪ EASY TO USE AND MAINTAIN: Simple throttle control,Easy, convenient, heavy duty control box,Easily accessible spark plug,Large fuel tanks,automotive type fuel cap.
• ➪ COMMON APPLICATIONS: Irrigate acre of lawn,garden and general use,Community Semi-Trash Clean ground Pond Water Remove.
• ➪ QUALITY RELIABILITY: New carburetor chamber coating and carburetor filter help to protect,Cast iron cylinder sleeve,against fuel impurities,Fuel Valve.

User questions & answers

Question:	is this pump 2 or 4 stroke engine
Answer:	4 stroke engine
Question:	how far can you suck the water
Answer:	6-8 meters
Question:	Work for oil
Answer:	Gasoline mixed engine oil above 90#. The ratio is 25:1
Question:	whats the largest size debris this trash pump can handle
Answer:	According to the size of the filter opening, you can use a smaller filter.

Product description

This Alphaworks Water Transfer Pump is powered by a Alphaworks 7HP 196cc 4-Stroke Gas Engine EPA Certified 1Gal. Gasoline Tank which can work 1.7HRS & 0.16GAL machined Oil Tank. Water Inlet/Outlet Diameter: 2 ", Suction: 23FT, Lift: 92FT, Max Flow Rate: 132GPM (gallons per minute), with Passable Solids of 1/2" in Diameter. Built for easy starting & provides ample power for the toughest conditions.

Designed with a Full Frame Protector on Heavy Duty Durable Frame, to withstand harsh environments. The cast iron impeller & volute to ensures best performance, providing longer life with smooth operation. The included clear water fittings, are constructed of chemical resistant materials, making this unit is your perfect pumping solution. Our Pump is EPA Certified.

The engine is designed to ensure the operator's safety. Always operate machine according to directions in the user manual, always wear the appropriate ANSI standard hand & eye protection (ENGINE OIL NOT INCLUDED, MUST ADD UPON UN-BOXING). The engine runs on Unleaded 87+ octane Gasoline (10%< less ETHANOL recommended) & a Max capacity of 1 gallon. ONLY use this Transfer Pump for approved applications.

• The capable 7HP 196cc Engine is designed for all DIY or Professional applications. This pump is designed to produce the highest level of performance in the smallest package possible. Built to meet commercial grade quality standards & provide dependable performance. Manufactured to OSHA/ISO Regulations, EPA Certified, making this a solid choice for the everyday Hard Working American!
• GEARHEAD SPECS - This Water Transfer Pump is powered by a Alphaworks 7HP 196cc 4-Stroke Gas Engine EPA Certified 1Gal. Gasoline Tank which can work 1.7HRS & 0.16GAL machined Oil Tank. Water Inlet/Outlet Diameter: 2 ", Suction: 23FT, Lift: 92FT, Max Flow Rate: 132GPM (gallons per minute), with Passable Solids of 1/2" in Diameter. Built for easy starting & provides ample power for the toughest conditions.
• QUALITY BUILD - Designed with a Full Frame Protector on Heavy Duty Durable Frame, to withstand harsh environments. The cast iron impeller & volute to ensures best performance, providing longer life with smooth operation. The included clear water fittings, are constructed of chemical resistant materials, making this unit is your perfect pumping solution. Our Pump is EPA Certified.
• SAFETY & PROPER USE - The engine is designed to ensure the operator's safety. Always operate machine according to directions in the user manual, always wear the appropriate ANSI standard hand & eye protection (ENGINE OIL NOT INCLUDED, MUST ADD UPON UN-BOXING). The engine runs on Unleaded 87+ octane Gasoline (10%< less ETHANOL recommended) & a Max capacity of 1 gallon. ONLY use this Transfer Pump for approved applications.

User questions & answers

Question:	Can the output be reduced down to still get high pressure out of a 3/4” garden hose
Answer:	I’m sure you can but would but would be well served to throttle it down. With a 1.5 in hose I can shoot water 30 feet with a fire hose nozzle
Question:	Is this pump self priming
Answer:	Yes with in reason
Question:	Can i transfer no 2 fuel oil with this
Answer:	Don’t think it’s advised
Question:	can you pump high slump concrete
Answer:	The Alphaworks pump I bought will not pump concrete.

Product features

AlphaWorks Gas Water Transfer Pump Portable 7HP 196cc 4-Stroke Engine EPA Certified 2" Inch Intake 132GPM Flow Rate 23FT Suction 92FT Lift 1/2" Passable Solids

We don't have the word 'Alpha' in our name to deliver your run of the mill products. AlphaWorks was created to provide TOP QUALITY life items to inspire the Alpha in You. Whether you own a top ranking business or are a Weekend Warrior DIY Enthusiast, you come to AlphaWorks to help get the job done.

HIGH CALIBER SPECS

AlphaWorks stops at nothing to deliver POWERFUL & CAPABLE Equipment for the hardworking Alpha.

• Motor Type / Tank Capacity: 196cc 4-Stroke OHV Engine
• Water Inlet/Outlet // Suction // Lift: 2" // 23' Feet // 92' Feet
• Max Flow Rate / Passable Solid Size: 132GPM // 1/2" in Diameter

HIGH CALIBER SPECS PT. 2

Getting better..

• Cooling / Ignition: Forced Air-Cooled / Transistorized Magneto Ignition (TCI)
• Dry Weight / Oil System: 27lbs (12.5kg) / Splash

EASE OF USE

AlphaWorks development team has spent countless hours in perfecting the practicability of Pumps, to deliver Transfer Pumps that you can trust to work!

• Fabricated Steel Frame Cage to protect your pump at all costs.
• Powder Coated Scratch Resistant Finish to to handle constant on Heavy Duty jobs.
• Weighing a Miniscule 50 pounds, we are the lightest and most Powerful Portable Pump pound for pound!

CAPABILITIES

it's the extra things...

• Equipped with a Gasoline Tank which can work 1.7HRS & 0.16GAL machined Oil Tank
• Water Inlet/Outlet Diameter: 2" inches
• Able to pass solids or debris up to 1/2" inch in diameter!

OUTSTANDING SOURCE OF POWER

• To give supply he power we built this Inverter Generator with a capable 196cc 4-Stroke OHV Gas Engine designed for reliability and durability.
• 1 Gallon capacity making this generator run for up to 1.7 Hours.
• Manufactured to OSHA/ISO Regulations, EPA Certified.

*ENGINE OIL NOT INCLUDED, MUST ADD UPON UN-BOXING

RELIABILITY

Our Pumps go through rigorous testing with suitable fluids allowed by design, indicating high-quality performance by being EPA Certified.

• The cast iron impeller & volute to ensures best performance, providing longer life with smooth operation.
• Our included Clear Water fittings are molded out of Chemical Resistant material.

UNIVERSAL VARIETY & CAPABILITY

AlphaWorks: Mechanical Meters, Automatic/Manual Nozzles, DEF(Diesel Exhaust Fluid) Advanced Technology Reels, Diaphragm/Portable Fuel Box/Diesel/Non-Flammable Fuel, Engines.

• This Transfer Pump is recommended for: Fuel Stations, Construction Sites, Textile Factories, Mining Stations, Environmental/Water Facilities & Fluid Transfer in various other establishments

SAFETY

We care about getting the job easily, but being SAFE on the job is our #1 Priority.

• ENGINE OIL NOT INCLUDED, MUST ADD UPON UN-BOXING.
• No Harm, No Foul - Only efficient Fluid Transfer when using this EPA Certified.

• Fuel Loss Prevention System will Buzz Automatically to prevent Fuel Loss
• Flow Rate of 9.6 Quarts per Minute or 2.4 GPM, Requires 2pk of AA Batteries (NOT INCLUDED)
• Siphon a various liquids like any non-corrosive liquid, gas, diesel kerosene and water (Not for drinking)
• Suction Tube Length to 15.5 inches to reach every last bit of fuel
• CSA Certified under UL Standards. This product was tested by CSA per an agreement with UL, and is certified for use in both Canada and the US according to applicable Canadian and US standards

User questions & answers

Question:	Will it lift gas from ground into 3/4 pickup
Answer:	We have ours on a transfer fuel tank, but because we have a pump it is not adequate venting and the sides of the tank suck in. We take the cap off to pump. If you have a gravity flow tank it may work just fine.
Question:	Is this safe to use with E
Answer:	We have a Transfer Flow auxiliary fuel tank and it fit great. Not sure if the tanks are the same size.
Question:	Why no auto-stop with the Trep01 pump
Answer:	I don’t thinks so This fits a 2inch NPT thread However there is a locking cap for a freightliner tank Measure to confirm
Question:	Is it possible to shorten the suction tube
Answer:	Measure the outlet to see if it's there same size

Product features

Battery Powered Liquid Transfer Pump

Applicable Liquids: Any non-corrosive liquids such as gas, diesel, and water (DO NOT use for drinking water)

Delivery Volume: 9 Liters per Minute

Power: Two "AA" Batteries (Not Included)

Suction Tube Length: 15.5 inch

Suction Tube Diameter: 1.3 inch

Discharge Tube Length: 24 inch

• Built in Auto-Stop to prevent loss of fuel
• Fuel Loss Prevention System: Automatic sensing pump / Buzzer Warning
• Works great with Kerosene heaters
• Makes refueling generators, lawn equipment, farm equipment simple, lifting heavy gas can's to refuel your equipment will be a thing of the past

Operation Instructions:

1. Insert Two "AA" Size Batteries (Not Included)
2. Insert Suction Tube into sending Container (Gas Can or Container with Fuel)
3. Clip discharge hose to receiving end
4. Flip Power Switch to Start
5. To Stop Flow, Wait for Auto-Sensor or flip power Switch Off

Product description

XtremepowerUS Water Transfer Pump is designed for handle the Toughest Jobs. Use to drain a pool in no time, empty a flooded basement, pump out a flooded trench, fill or empty a water storage tank or reservoir, irrigate a field, hose down a construction site and more. 53 gallons per minute maximum delivery powered by an 97cc engine, provides superior power, performance and efficiency.

Feature:

• Perfect for Emergency Use - The gas engine on the pump makes our water transfer pump ideal for use during power outages and at remote jobsites, suitable for flooding, transfer water and empty pools etc
• Lightweight and Portable - Pump has a 1.5-inch inlet, a 1.5-inch outlet and comes with a convenient handle making it easy to move from one job to the next
• Handle the Toughest Jobs - Use to drain a pool in no time, empty a flooded basement, pump out a flooded trench, fill or empty a water storage tank or reservoir, irrigate a field, hose down a construction site and more
• Efficient Work - 1,980 gallons per hour maximum delivery volume, just right for pumping small volumes of water quickly
• High Quality Pump Head and Easy Control - The pump head is made of high quality aluminum alloy, which is sturdy and wear-resistant and prevents blasting. Pull recoil starting system allows for simple start up without multiple pulls.

Specifications:

• Applications: Water/Trash Transfer Pump
• Fuel Type: Gasoline
• Start System: Pull Recoil
• Horse Power: 2.5 (1.8kW)
• Engine Displacement (CC): 97 / Air Cooled 4 Stroke Engine
• Max Power: 3600 RPM
• Gallon Per Hour: 1,980 Gal. per hr @ 0 ft. lift / 1,500 Gal. per hour @ 10 ft. lift
• Diameter Inlet/Outlet: 1.5"
• Fuel Tank Capacity. 0.37 Gal.
• Overall Dimensions: 14-1/2"(W) x 9-3/4"(L) x 17"(H)

Package Include:

• Gasoline Water Pump
• Manual

• Perfect for Emergency Use - The gas engine on the pump makes our water transfer pump ideal for use during power outages and at remote jobsites, suitable for flooding, transfer water and empty pools etc.
• Lightweight and Portable - Weighing in at just under 31 lbs, this pump has a 1.5-inch inlet, a 1.5-inch outlet and comes with a convenient handle making it easy to move from one job to the next
• Handle the Toughest Jobs - Use to drain a pool in no time, empty a flooded basement, pump out a flooded trench, fill or empty a water storage tank or reservoir, irrigate a field, hose down a construction site and more
• Efficient Work - 1,980 gallons per hour maximum delivery volume, just right for pumping small volumes of water quickly
• High Quality Pump Head and Easy Control - The pump head is made of high quality aluminum alloy, which is sturdy and wear-resistant and prevents blasting. Pull recoil starting system allows for simple start up without multiple pulls.

User questions & answers

Question:	Can that pump remove water from a hole that is 75ft to 100ft deep
Answer:	You can add a 2" T with a valve or a plug & have the discharge port face anyway you want...
Question:	Is it a self priming pump
Answer:	These are made in China. Mine starts easily and seems to pump great.
Question:	What is the maximum pressure this pump will generate? Is it suitable for application with restricted flow and valve like a garden hose end sprayer
Answer:	Please tell me , where you are going to be using this pump?In what state? I need to know the temperature range prior to suggesting the lube oil.
Question:	What is the maximum lift in this pump
Answer:	NPT
Question:	Can discharge piece at the top (one 2 in & two 1.5 in conn) be removed & turned so the discharge port (2 in) faces the opposite direction -180 deg
Answer:	Using 80’ of 1” hose with the FR711VA will drop the flow rate to around 7 – 8 GPM. If you increase the hose diameter to 1.25" - 80’ of 1.25” hose, the flow rate would be around 12 GPM. If you go with 80’ of 1.5” hose, the flow rate will be around 18 GPM. Hope this helps
Question:	Which country it was made in
Answer:	The pump is rated for 20GPM out of the meter, not the nozzle. After installing a filter, putting on a hose and nozzle you are looking to drop approximately 6GPM to end up giving you approximately 12-14GPM total.
Question:	What lube oil is required (detergent/non-detergent; weight of lube oil, etc. )? We need specifics on the lube oil in order to buy it for 7.5HP engine
Answer:	does a suction pipe come with the pump when bought, we have a 45'' dia. tank
Question:	What type of threads are the fittings
Answer:	Yes, and it is a very reliable pump.

Product features

Gas-Powered Semi-Trash Water Transfer Pump 2-Inch 7.5 HP Trash Pump 198GPM Gas-Powered Portable Water Pump with 210cc OHV Engine

TOP OF THE RANGE WITH 75 m HEAD LIFT AND 8 m SUCTION Pump casing, single impellers and all fittings made from quality non corrosion marine grade aluminium Powered by 7.5 HP 4 stroke OHV engine 210 cc with Japanese Carburetor.

1 x 2 "OUTLET and 2 x 1.5 "OUTLET

• Three outlets, flexible water supply; high-pressure water pump, with a 2" water outlet, two 1.5" water inlets; with three plugs can arbitrarily block the water outlet flexible water supply

2" INLET PORT (50mm)

• Water pump made from non-corrosive marine grade aluminum and alloy hose fittings,powder coated pump casing,stronger than common aluminum oxide seals.

MAX HEAD LIFT 75 m

• Water pressure pump is self-priming and comes with automatic low oil cut-off protection,compact and light weight ,easy starting, reliable and fuel efficient engine

HIGH PRESSURE AND QUIET

• 2" fire pump is a quiet, high pressure, single impeller, high efficiency pump, compact and light weight. It is self-priming.

SUPERIOR PERFORMANCE

• Comes with automatic low oil cut-off protection. Easy starting, reliable and fuel efficient engine. Powder coated pump casing.

WIDE APPLICATION

• Widely used in various water environments, economical and fuel-efficient, powerful; can be used for farmland irrigation, fire fighting, road cleaning, mountain water supply, flood control drainage, garden watering