10 best water pumps for hondas
Water pumps for Hondas typically refer to the water pump component used in Honda vehicles, such as cars and motorcycles. The water pump in a Honda vehicle plays a crucial role in the cooling system, ensuring that the engine operates at an optimal temperature. Here's what you should know about water pumps for Hondas:
Function: The primary function of a water pump in a Honda vehicle is to circulate coolant (usually a mixture of water and antifreeze) through the engine and radiator. This circulation helps dissipate excess heat generated during engine operation, preventing overheating.
Components: A typical water pump for a Honda vehicle consists of several components, including an impeller, a bearing assembly, a shaft, and a housing. The impeller is a key component responsible for moving coolant through the engine.
Timing Belt vs. Timing Chain: In Honda vehicles, the water pump may be driven by either a timing belt or a timing chain. If your Honda has a timing belt, it's essential to replace the water pump when replacing the timing belt, as the two components are often located in close proximity, and replacing both simultaneously can save you future labor costs.
Signs of a Failing Water Pump: Common signs of a failing water pump in a Honda include coolant leaks, unusual noise (such as a squeaking or grinding sound), overheating, and visible damage to the pump housing. If you notice any of these symptoms, it's crucial to address the issue promptly to prevent engine damage.
Replacement: Replacing a water pump in a Honda is a complex and labor-intensive process that typically requires the expertise of a mechanic. It involves draining the cooling system, removing the timing belt or chain cover, and accessing the water pump.It's often recommended to replace the water pump, timing belt or chain, and related components as a preventive measure when one of these components requires replacement.
OEM vs. Aftermarket Parts: When replacing the water pump in your Honda, you can choose between original equipment manufacturer (OEM) parts and aftermarket parts. OEM parts are made by Honda and are designed to meet factory specifications. Aftermarket parts are produced by third-party manufacturers and may vary in quality and price. It's essential to choose a reputable brand if opting for aftermarket parts.
Maintenance: Regular maintenance of your Honda's cooling system, including flushing and replacing the coolant at recommended intervals, can help extend the life of the water pump and prevent overheating issues.
Compatibility: Ensure that the water pump you select is compatible with your specific Honda model and engine type. Water pumps may vary in design and specifications across different Honda vehicles.
In summary, the water pump in a Honda vehicle is a critical component of the cooling system, responsible for maintaining the engine's temperature within a safe operating range. If you suspect any issues with your Honda's water pump, it's advisable to have it inspected and, if necessary, replaced by a qualified mechanic to prevent engine damage and ensure reliable performance.
Below you can find our editor's choice of the best water pumps for hondas on the market
Honda - General Purpose 2-Inch Centrifugal Water Pump with GX12 118cc Series Commercial Grade Engine and 164 GPM Capacity - WB20XT4A
Honda
Product description
With a 3-Year Residential and Commercial Guarantee, the Honda WB20XT 164 GPM 2" GX120 118cc General Purpose Centrifugal Water Pump is Protected By Honda Oil Alert Warning System and comes in a heavy-duty full frame for protecting the pump and engine on both sides. The durable Honda GX series commercial grade engine is easy starting and provides ample power for the toughest conditions. It has a 164 gal./min. capacity and centrifugal 2" pump.
- OHV COMMERCIAL ENGINE - The durable Honda GX series commercial grade engine is easy starting and provides ample power for the toughest conditions.
- 4 VANE HIGH EFFICIENCY IMPELLER - The WB20's exclusive, Honda-designed 4 vane impeller offers improved performance and high efficiency.
- DURABLE - The WB20 features abrasion-resistant silicone-carbide seals for extended wear.
- CAST IRON VOLUTE - The rigid-mount cast iron volute reduces case wear, increasing the life of the pump.
User questions & answers
| Question: | How long will it run on one tankful |
| Answer: | It will run 2 1/2 to 3 hours on a tank full. I can't say enough good about this little pump. It starts on the first pull every time. It has totally saved our garden this year. |
| Question: | Q distancia se puede trasladar el agua |
| Answer: | Ochenta meters |
| Question: | Any good as a fire hose pump ? Has anyone used it for one ? Live in the forest, building a pond right now for the pump's water |
| Answer: | Yes, great pump and very powerful for its compact size. I pump water from a river, up a 75’ tall embankment. Get the adjustable fire hose nozzle, it can shoot a stream of water 30’. Great for fire protection |
| Question: | Horse power |
| Answer: | https://engines.honda.com/models/model-detail/mid-gx Try this link to the Honda website. It states 3.5 HP. |
Honda Power Equipment WX15 Lightweight General Purpose 1.5" Water Pump with GX Series Commercial Grade Engine and Transport Handle
Honda
Product description
Honda WX15 1.5" Water Pump
- Honda WX15 1.5" Water Pump
User questions & answers
| Question: | What is the psi rating |
| Answer: | 50 max |
| Question: | Will this sucks leaves out of a pool and spit them out the other side |
| Answer: | no, try to find transfer pump, this is high pressure pump for fire or irrigation ... |
| Question: | how powerful is the engine |
| Answer: | The power is incredible...I use it to empty a 300 gallon septic tank that I've rigged up to act as rain collection system. I can drain tank in lsess than 45 minutes and the hoses feel like fire hoses from the pressure. Great workhorse for the size and the money! |
| Question: | What is the head on this pump (How high will it push water |
| Answer: | Suction head lift is 23 feet. Total head lift is 121 feet. I use this to pump water from a steam to a 100 gallon tank 60 feet higher than the stream. Works flawlessly. The smaller WX10 does the job just fine as well. The Honda website is very good with detailed specs. |
Honda Power Equipment WX10 52 PSI 4-Stroke Commercial Engine Gasoline Powered Water Pump with Hose Adapter, Suction Hose, Clamps, and Strainer
Honda
Product description
Need to move some water? The Honda WX10TA 1-Inch 4-Stroke Gasoline Powered Water Pump has a 52 PSI, 25 cubic-centimeter, overhead valve 4-stroke engine that's quieter, more powerful and consumes less fuel than comparable engines. A precise valve actuation and heavy-duty design offer improved efficiency increased reliability and quiet operation. Oil Watch Warning System feature automatically shuts off before oil level is low and cannot be re-started until oil is added. This prevents engine damage to your water pump and costly repairs while enhancing long-term durability. Transistor Controlled Ignition provides a clean, efficient spark that ensures fast, easy starting. Auto Decompression automatically "opens" valve slightly to reduce initial backpressure when starting making manual starting effortless. This self-priming centrifugal pump delivers up to 121 feet of total head and 26 feet of suction head. 4-stroke engine pumps up to 32 gallons-per-minute through a 1-inch port. Die-cast aluminum pump housings are used for lighter carrying weight. Impeller and volute case are cast iron for greater strength and durability; and they withstand wear from grit, sand, silt, etc. Empty hot tubs, drain ponds, or move other types of clean water with the The Honda WX10TA 1-Inch 4-Stroke Gasoline Powered Water Pump .
- General purpose 1-inch pump for a variety of uses
- For homeowners, gardeners, boat owners, and more
- WX10 model has been completely redesigned for better performance and longevity
- Mini 4-stroke commercial engine starts up fast
- Extremely lightweight and easy to carry at only 13 pounds
User questions & answers
| Question: | What accessories does it come with? Suction hose and some 1" hose |
| Answer: | It comes with everything except the pressure hose Which I just use my garden hose. This is a great pump for the money |
| Question: | How long will it run on a tank of gas |
| Answer: | 10-15 minutes at full throttle to pump it up to 12 feet in height. And it won't draw from a running stream as I needed it for only still water. |
| Question: | Can I close the water output with the pump running |
| Answer: | I do this everyday on my pump and it’s never hurt it. The pump has at least 300 hours on it. I’ve never Done this for more than a minute though. |
| Question: | On the honda site for the wx10 it says it self-primes, this mode sold on amazon says wx10ta. whats the difference and why people say doesnt selfprime |
| Answer: | Some people may misinterpret the term self-priming. Every self-priming centrifugal pump in the world must have the pump case filled with water before starting. |
Pacer Self-Priming Transfer Water Pump - 11,700 GPH, 2in. Ports, 160cc Honda GC160 Engine, Model Number SE2UL E5HOC
Pacer Pumps
Product description
Excellent for water and ag chemical transfer, irrigation or clearing flooded areas. Powered by a 160cc Honda GC160 engine. Made of corrosion-resistant polyester with chemically resistant EPDM seals. Self-priming with 25ft. max. suction lift. Self-Priming: Yes, Dimensions L x W x H (in.): 21 x 17 x 15, Max. Total Head (ft.): 120, Flow (GPH): 11,700, Discharge Port (in.): 2, Seals: EPDM, Impeller Shaft: Polyester, Suction Port (in.): 2
- Honda GC160 engine
User questions & answers
| Question: | Can we learn the Pacer model number, please? Tks |
| Answer: | It did not make my teeth sensitive |
| Question: | will this suck water 50foot away |
| Answer: | The teeth whitening gel pens will not work on most bonded teeth. Most bonding materials don't respond to teeth whitening gels in general, as echoed by the American Dental Association (ADA), |
| Question: | Does it come with the roll cage |
| Answer: | Our teeth whitening pens for optimal teeth whitening results are proudly made in the USA! |
| Question: | What is the run time on a tank of gas |
| Answer: | Directions for Use: Remove cap. Twist the dial on the bottom of the pen (it will only turn one way) to release the whitening serum into the brush tip. Keep twisting until the tip is saturated. (It may take many turns of the dial during your first use, but won't take as long for later uses.) With an up-and-down motion, apply a thin layer with the brush to the front surfaces of teeth that are visible when you smile. Apply extra serum to darker areas, and don't apply any serum on the gums. Replace the cap. Allow the serum to dissolve naturally on your teeth. Don't eat, drink, or rinse for at least 20 minutes to allow it to work. You don't have to remove anything from your mouth - it's safe to swallow the amount used in one application. Repeat twice daily for a week to whiten teeth, or once a day to maintain a white smile. |
| Question: | Can I run bleach on it |
| Answer: | yes,it will not hurt your teeth enamel |
| Question: | Que tipo de combustible |
| Answer: | not recommended. Wear Grinigh COCONUT OIL Whitestrips for 60 minutes a day, will see a whiter smile after 7 days, and full results in 28 days. |
B E Pressure WP-3065HL Water Transfer Pump, 3", GX200, 264 GPM, 6.5 HP
BE Pressure
Product description
BE Pressure WP-3065HL Water Transfer Pump 3", GX200, 158 GPM, 6.5 HP. Features include Centrifugal Aluminum Pump, Heavy Duty Cast Iron Impeller, 85' Total Lift, and 26' Suction Lift.
- 196cc Honda GX200 Engine
- 3" Intake Connection MNPT
- 3" Outlet Connection MNPT
- 264 GPM Max Flow
- Recoil Start & Low Oil Alert
User questions & answers
| Question: | Were can I get a nozzle for pump |
| Answer: | this is ship by FBA form US |
| Question: | I need a seal kit for this pump |
| Answer: | the better after recovering health，may be take a tingling sensation |
| Question: | What is the psi on this pump |
| Answer: | Yes, the gel is required. The gel does the whitening and the light helps speed up the process, it will not whiten on its own. |
| Question: | what size is the gas tank? will it run for more that 6 hours on a tank a gas |
| Answer: | This is NOT permanent whitening (in fact, there is no such thing unless you get veneers or fake teeth). The whitening results from this product will last from 1-3+ months, but it all depends on your diet and how you take care of your teeth. A person who brushes daily and avoids staining foods/beverages (coffee, wine, soda, tea, tomato sauce etc) will have longer lasting results than someone who does not. |
The ROP Shop 3600 PSI Power Pressure Washer Water Pump, 2.5 GPM, 3/4" Shaft for Honda GX200
The ROP Shop
- Replacement 3600 PSI Power Pressure Washer Water Pump, 2.5 GPM, 3/4" Shaft for Honda GX200
- Specs - Maximum Pressure: 3600 PSI, Maximum Flow: 2.5 GPM, Maximum Pump Speed: 3500 RPM, 6.5 HP, Male Outlet: 22mm Threaded, Standard Garden Hose Inlet, 3/4" Horizontal Shaft. Refer to images 2 and 3 for more information
- Includes - Pump; comes as shown in the first image
- Pump comes with built in Unloader, Chemical Injector, Thermal Release Valve, & Oil Reader included
- Replaces most pumps with 3/4" shaft. Mounting pattern is 2 9/16" center to center
User questions & answers
| Question: | I have a honda GC190 (6hp) motor and the 2750 psi pump is bad. Can i replace it with this pump? 2 9/16" bolt spacing and 3/4" shaft size |
| Answer: | Trays shrank a bit too much, and yes chemical didn't work with light either... |
| Question: | Is the pressure adjustable or is it a straight 3600 psi |
| Answer: | I have sensitive teeth and it has never made my teeth hurt. |
| Question: | Will this pump fit a 3400 psi DeWalt pressure washer |
| Answer: | No. Not for use on synthetic teeth. Will not whiten crowns, partials, dentures, or veneers. This product can damage enamel. Damaged enamel will lead to dull, sensitive, transparent, and yellowing teeth. |
| Question: | I have a Husqavarna model 020524 power washer, and need to replace the pump. Which one do you recommend for a replacement |
| Answer: | I wait 30mins after use to eat or drink anything. I have mot had any teeth sensativity, but everyone is different. |
Annovi Reverberi OEM 2600 PSI Pressure Washer Water Pump for Honda Generac Husky Karcher & More
Annovi Reverberi
Product description
Please review all product information to ensure that this product is compatible with your unit./p>
Before processing a product for warranty, it must be verified as the correct part by the OEM part number(s) and/or model number(s). If you have any questions or concerns, please ask.
A Message to the Customer
The ROP Shop staff constantly strives to provide clear and concise product information. We understand that sometimes it can be difficult to confirm product compatibility. It is your responsibility to confirm this is the correct product you need; therefore, we encourage all customers to fully review the information provided in this listing prior to purchase. Any specific models stated in the listing are potential matches only and not a guarantee of compatibility. Nothing is worse than having to return a product, trust us…we get it. Let’s work together to avoid this! If you are unsure as to whether or not this is the correct product for your unit, please ask. If you seek assistance we will need as much of the following information as possible, if applicable, to help you find the product you are looking for:
Model and/or Sub-model
Spec and/or Type Number
Code and/or Serial Number
Year
Engine Horsepower
Our knowledgeable product specialists are always willing to help you verify product fitment. Stay rugged, my friend.
-The ROP Shop Staff
- 2600 PSI / 2.5 GPM - OEM Pressure Washer Water Pump
- Shaft Size: 3/4"
- Hole Distances Are 2 5/8" Center to Center for Outer Holes; 1 7/8" from Center Shaft Hole to Each Outer Hole
- Fits Many Brands: Briggs & Stratton, Honda, Powerstroke, Karcher, Generac, Blackmax, Craftsman
- Includes a pair of black nitrile gloves for clean & easy installation!
User questions & answers
| Question: | does it have a sight glass for oil & can the oil be changed |
| Answer: | Yes, the kit is truly works for me. I saw a noticeable difference after the first treatment. So far used it one week and was at the whitening teeth level that I wanted. |
| Question: | Can i instalk this pump on karcher g 2400 vh |
| Answer: | Use it the same as the whitening gel. Use it alone then rinse and apply the gel. The desensitizing gel just works like Sensodyne Repair and Protect Toothpaste or similar product. It makes you teeth less porous tehrefore less sensitive. |
| Question: | will fit honda gc160 (replace for old karcher k 2400 hh |
| Answer: | In my opinion, do not know that is best but this teeth whitening kit truly worked for me. Used 3 weeks and get the noticeable difference white, very pleased!! |
| Question: | I have sears craftsman mod# 580.762010 2000psi 2.2 gpm pressure washer with honda 5hp, is this the correct replacement? chemical injection inlet |
| Answer: | I would use daily until you acquire the results you’re looking for and then use once or twice a week for upkeep |
B E Pressure WP-2065HL 2" Water Transfer Pump, 6.5 hp, 158 GPM
BE Pressure
Product description
BE Pressure WP-2065HL 2" Water Transfer Pump, 6.5HP, 158GPM. Features include Centrifugal Aluminum Pump, Heavy Duty Cast Iron Impeller, Recoil Start and Low Oil alert.
- 196cc Honda GX200 Engine
- 2" Intake Connection MNPT
- 2" Outlet Connection MNPT
- 158 GPM Max Flow
- 82' Total Lift, 26' Suction Lift
User questions & answers
| Question: | Can the output be reduced down to a 1-1/2" or 1" fire hose |
| Answer: | yes, but pump rpm will need to be under 780 rpm! |
| Question: | Can this motor and pump be used to transfer diesel? How long will the seals last |
| Answer: | 225lb and it will be on a pallet! |
| Question: | What does hp mean? New to this sorry |
| Answer: | Back to the front of flywheel 7.75 from left to right 9" both from center hole |
| Question: | Is this pump self prime |
| Answer: | Flywheel Dia./Groove: 17"/429mm/2B |
| Question: | Can I use this pump with a 7.5hp motor |
| Answer: | This pump has an intermittent duty cycle, so, no it is not built to run continuously. |
| Question: | What is the weight and dimensions of the box |
| Answer: | Si es lo mismo |
| Question: | Can someone provide the mounting dimensions |
| Answer: | on the front--or the top? the pressure screw is a little allen key thing, not a phillips screw...and it goes to the right, but Shurflo told me to never trn it more than a quarter turn at a time, and never more than a full revolution |
| Question: | what is the pully dia on this pump |
| Answer: | The fittings are common pipe thread, that is different than a garden hose. As said above you can get adapters to use a garden hose. Hot Tip: common 3/4" garden hose can be used as follows With a PVC pipe fitting you use a short piece of 1/2" PVC pipe as an outlet. Then cut the fitting off of a common 3/4" garden hose, slip the end over the PVC, and use hose clamps. Put the hose in hot water for a few minutes until it is soft, then slip it on a few inches. |
Pressure Washer Water PUMP for Honda Excell XR2500 XR2600 XC2600 EXHA2425 XR2625
Himore
Product description
Note: Please review all product information to ensure that this product is compatible with your unit. A Message to the Customer: We constantly strive to provide clear and concise product information. We understand that sometimes it can be difficult to confirm product compatibility. It is your responsibility to confirm this is the correct product you need; therefore, we encourage all customers to fully review the information provided in this listing prior to purchase. Nothing is worse than having to return a product, trust us…we get it. Let’s work together to avoid this! If you are unsure as to whether or not this is the correct product for your unit, please ask. If you seek assistance we will need as much of the following information as possible, if applicable, to help you find the product you are looking for: Model, Spec and/or Type Number, Code and/or Serial Number, or Year
- 2600 psi PRESSURE WASHER WATER PUMP
- For Honda & Excell XR2500, XR2600, XC2600, EXHA2425, XR2625
- 2400-2600 PSI / 2.3-2.4 GPM
- Garden hose hookup / 22mm Outlet
- Fits 7/8" Short Shaft Engines 1-1/2" or less
User questions & answers
| Question: | Will this fit an excell xr2600 with an a14527 pump on an Honda motor |
| Answer: | Yes this pump only replaces the odd strap/bow tie pump on the xr2500 xr2625 xr2600 exha2425, 7/8" shaft model, thanks tony 727-858-1721 |
| Question: | will this fit the |
| Answer: | It fit the 2400 perfectly. I don't know if it will fit the 2425. |
| Question: | Is fit excell xr2526 2.5 gpm honda 5.0 hp - gc |
| Answer: | If you meant the model to be "XR2625," then yes this is the correct replacement pump.ShaunaCustomer Service |
| Question: | will it fit karcher g2500vh |
| Answer: | Is pump |
B E Pressure TP-3065HR Trash Pump, 3", GX200, 264 GPM, 6.5 HP
BE Pressure
Product description
BE Pressure TP-3065HR Trash Pump 3", GX200, 264 GPM, 6.5 HP. Features include Recoil Start and Low Oil Alert, 85' Total Lift, and 26' Suction Lift.
- 196cc Honda GX200 Engine
- 3" Intake Connection MNPT
- 3" Outlet Connection MNPT
- 264 GPM Max Flow
- Up to 1" Solids
User questions & answers
| Question: | Can i use this to clean muck and leaves from my pond |
| Answer: | Hello Amazon Customer! Thank you for your question concerning the Heritage Store Toner. The PH of this product is more alkaline above 7.0. Please contact us if you have any other questions, or if there is something else that we can assist you with. Thank you for choosing Heritage Store and have a nice day. Matt |
Latest Reviews
View all
Dad Hats
- Updated: 06.03.2023
- Read reviews
Rosehip Seed Oil
- Updated: 09.02.2023
- Read reviews
100 Movies
- Updated: 02.06.2023
- Read reviews
Thermos Bowling Bags
- Updated: 25.04.2023
- Read reviews
Nuwave Mini Ovens
- Updated: 23.05.2023
- Read reviews