14 best inline hot water heater electric

Product description

This Smart Technology electric tankless water heater is configured as a "whole home" model for climates where incoming water temperature is 67°F and above. This model is well suited for heating up to 2-Gallon per minute, which is the equivalent of one shower head (with a 1.5 gpm flow) and one sink with a low inlet water temperature of 67°F and an output setting of 105°F. Digital Temperature Control allows you to set your temperature in increments of 1 Degree. This model can also be used in colder climates as a Point of Use for a sink or other low flow application. All tankless water heaters are sized based on flow rate and temperature rise, and there is a direct relationship between the two. So if used in a cold area requiring a high temperature rise, it will be more limited in the amount of fixtures (gallons per minute) it can heat at one time compared to a warmer climate. When sized properly this water heater will provide endless hot water and only consume the energy needed, giving the user complete control. Prior to purchase and installation please verify this model is the right size for the expected demand and electrical requirements. The ECO 11 requires a minimum 125 amp electrical panel for installation with 60 amp double pole breaker connected to set of #6 awg wire. Plumbing connections are 1/2" compression fitting with the option of 1/2" NPT adapter included. For additional assistance please feel free to contact our support center at 877-474-6473.



NOTE : 11Kw at 220 is equal to 13kw at 240. .Activation Flow : 0.3 GPM

From the Manufacturer

This Smart Technology electric tankless water heater is configured for climates where incoming water temperature is 67 Degree F and above. This model is well suited for heating up to 2-Gallon per minute, which is the equivalent of one shower head (with a 1.5 gpm flow) and one sink with a low inlet water temperature of 67 Degree F. Digital Temperature Control allows you to set your temperature in increments of 1 Degree. This model can also be used in colder climates as a Point of Use for a sink or other low flow application. Prior to purchase and installation please verify this model is the rights size for your hot water needs and electrical requirements.

• Lifetime warranty
• Save up to 60-percent on your water heating cost with an ECOSMART electric tankless water heater
• Never run out of hot water with an ECOSMART tankless water heater
• Patented Self Modulating Technology and design
• ECOSMART tankless water heaters are 99.8-percent energy efficient.Uniform Energy Factor:0.98

User questions & answers

Question:	Ours has only been in service for less than a year - will not adjust temperature to anything above 85 Deg. F. What do you think is the problem ? kds
Answer:	My only guess is that the rheostat (variable resistor) that the temperature adjustment knob is attached to may be faulty. If that isn't it then I don't know. Sorry.
Question:	The warrenty says that this unit must be installed by a licensed electrician and plumber, for them to honor the "life time warrenty." why
Answer:	Hello Bob, The reason is the same as why an innumerable number of gadgets around the world have that little "warranty void if removed" label. Because getting inside of one requires a certain level of training and expertise. Same with this unit. GadgetsGo is an authorized Ecosmart dealer. Kind regards,HenryGadgetsGo
Question:	My house is wired 110V. What additional items do I need to purchase for the conversion
Answer:	Just to expand slightly on prior answers, normally a residential service feed is 240 volts between the two incoming hot legs. There is also a neutral leg, which (hopefully) has zero potential with reference to ground. The voltage between either one of the hot legs and the neutral leg is 120 volts. The 120 volt circuits in your house are connected to one or the other of the two hot legs, and only one. An attempt is made to assign circuits to the two hot legs in a way that will roughly balance the load between them. The other side of a 120 volt circuit is connected to the neutral leg. There is additionally a safety ground run with the circuit, which also ties into the panel. Certain devices require more power (work product of current and voltage) than is practical to deliver using a 120 volt circuit. Common examples are your clothes dryer, and your electric stove. These devices are powered by both hot legs, with a difference in potential of 240 volts. This water heater is also such a device.STRONG BUT FRIENDLY WARNING: If you did not already know this, please don't make wiring this water heater your learning opportunity with electricity. Hire someone who knows how to do it right. Cutting corners, especially with higher currents and voltages, can lead to equipment damage, fire, and electrocution. Electricity is not magic, and you can certainly learn how to do many common wiring tasks safely on your own, but today is not the day to begin that journey. You need properly sized components, properly installed, and connected to an adequate service. Also, if you really, really foul up, you could conceivably wind up making that morning shower more energizing than you ever imagined, if you get what I mean. So newly aspiring electricians should go fix their grandmother's favorite table lamp instead. Once they have that working they can use it to to start reading books about electricity, residential wiring, and eventually, books about this stuff: http://amazon.com/s/ref=nb_sb_ss_c_0_8?url=search-alias%3Dstripbooks&field-keywords=nec+code&sprefix=nec+code%2Caps%2C164 . Of course, you still have to know not to nick conductors when you strip them, and other trade craft like that ; ) . Like almost everything in life that is fun, electricity will hurt you. Sort of like all those people you dated for a while, and then wished later you had never met.
Question:	what amp breaker is required
Answer:	The National Electrical Code requires conductors and overcurrent protection to be sized at 100% of the manufacturer's branch circuit recommendation for tankless electric water heaters. A 60 amp breaker is the same price as a 40 or 50, it is the wire that costs more. #6 AWG wire is required for a 60 amp circuit. If you undersize the wire it could overheat and catch fire. Protect your family and follow the manufacturer's sizing for this, or any other, electrical device. Your family's lives are worth the extra money. 

Product features

3 Smart Steps for Endless Hot Water

Step 1: Determining your average inlet water temperature is important, this allows you to determine how well your unit will perform in your desired location. A lower inlet water temperature will require a higher kilowatt product.

Step 2: Next you will determine how many applications your unit can run simultaneously at your chosen location inlet water temperature. Tankless electric water heaters are sized for maximum simultaneous use, not maximum fixtures in your home.

Step 3: Determining specifications and electrical infrastructure is important because without the correct infrastructure your unit may not fit into your breaker panel.

Product description

Get hot water where it's needed, when it's needed with the Bosch ES4 Tronic 3000 T Electric water heater. This 2.5-gallon capacity point-of-use mini-tank fits right under your sink and provides a practical and effective solution to your hot water needs. This smaller model can be plugged right into a 120-volt outlet with the 36-37" cord, or can be installed in-line with a larger hot water source to provide "on-demand" use. The glass-lined tank offers great insulation and added durability, while the heater's fast recovery rate eliminates long waits for hot water. An external dial allows you to easily control the temperature range, and the temperature-and-pressure relief valve enhances your safety. The ES4 Tronic 3000 T from Bosch has a sleek and attractive exterior design that blends in seamlessly with existing decor when installed in a visible location, making this heater a great option in any room.

Manufacturer Contact Information

800-283-3787

• CONVENIENT HOT WATER HEATER: 2.5 gallon point-of-use mini-tank fits under your sink to provide hot water right where you need it. Thermal efficiency is 98%. Dimensions : 13.75 W x 13.75 H x 10.75 D Inches
• LONG LASTING QUALITY: This electric water heater is easy to maintain and has premium glass-lined material for a long service life. (Amps 12A, Volts (VAC) 120)
• INDEPENDENT INSTALLATION: 36-37" cord plugs into a 120 volt outlet for independent installation or in-line with a large hot water source
• FAST RECOVERY RATE: Eliminates long waits for hot water at your sink, get on demand hot water at your every need (supplies up to 2 sinks at a time)
• EASILY MOUNTED: Can be shelf, wall or floor mounted (bracket included); simply tap into the cold water line and install the water heater directly at the sink to provide hot water

User questions & answers

Question:	Is it necessary to connect an expansion tank to this heater (for safety purposes)? It states something to that effect in the user manual
Answer:	The expansion tank for this heater is not required. Most people already have these installed in their homes but if not then it would be Ok without it as there is a pressure relief valve on top if something happened. GlobalTowne is an authorized Bosch distributor.
Question:	would this be able to supply a shower
Answer:	A standard flow shower head is around 2.5 gallons per minute. A low flow head is around 1.5 gallons per minute. The recovery rate for a 90 degree temperature rise is 6.8 gallons per hour! So even the 7.5 gallon unit would only provide 4 minutes of shower time before the temp dropped off dramatically. (even at the low flow rate..)
Question:	Can be used "in-line with a large hot water source"? Would it help a large bathtub that runs out of hot water before it gets full from main tank
Answer:	If your bathtub is bigger than your main heater tank, this unit isn't going to do much for you. It will add 2.5, 4, or 7 gallons to the capacity of your main tank, depending on which Bosch unit you buy. The 7 gallon unit requires a specially wired circuit. You will also get a little bit of lukewarm water that was in the line between your main heater and the Bosch unit. Unless your main tank is awfully small and your bathtub massive, the 4 gallon unit should work for you. Maybe a demand type thankless heater in your bathtub hot water feed would be a better choice, but be careful to size it properly for your desired flow rate and temperature rise. Also a tankless is likely to require special wiring.
Question:	When this heater is connected to the hot water line, what happens with the cold water that was sitting in the pipes
Answer:	When the tap is opened, the hot water in the unit flows out. The colder water that was sitting upstream of the unit, enters the unit to be heated. If the tap remains open, the newly heated water flows out, being replaced eventually, (depending on the distance to the main water heater), with the water from the main water heater. You will probably set the unit temperature to equal the main water heater temperature, if you want to keep a constant temperature, but other scenarios are possible.

Product features

Bosch ThermoTechnology

The Bosch Tronic 3000 T point-of-use electric mini-tanks are available in three compact sizes, which can be wall-hung (bracket included) or floor-mounted. They fit easily under a sink, even in a cabinet space, and because they have a sleek and attractive design, they blend in seamlessly with existing decor when installed in a visible location. Simply tap into the cold water line and install the water heater directly at the sink to provide hot water. Great for a wide range of locations!

Water Where You Need It

Provides hot water quickly at point of use and comes with temperature /pressure relief valve installed - 2.5 and 4 gallon tanks feature a simple 120 VAc plug-in connection (1440 watts).

Quality for Long-Life

Thick CFC-free foam insulation for maximum energy efficiency, glass-lined tank for durability.

Great for Small Spaces

Water heaters are compact and lightweight and can be floor, shelf, or wall mounted (except 7 Gallon) - features a sleek and attractive design to blend seamlessly with decor.

Minimize Wait Time for Hot Water

Waiting for hot water at a sink located far from a primary heating source can be frustrating. Only having access to cold water from a sink is just not useful, and plumbing a hot water line to every sink in a home or business requires time and money. To get hot water where it’s needed, when it’s needed, a better solution is to use the Tronic 3000 T from Bosch: a point-of-use electric mini-tank heater. This heater can supplement a primary water heating source, or be used under a single sink. In fact, the Bosch Tronic 3000 T can be used for three different applications: as a sole water heating source for a single sink, as a supplement to an existing heater located far from the sink, and as a buffer installed in-line with tankless water heaters that experience intermittent cold water, also known as 'cold water sandwiching'. No matter the configuration, there’s minimal stand-by loss from this premium mini-tank water heater.

Product description

 Color:BIS03-White (no remote control)



FEATURES



Mini-Tank Water Heater comes with 1.5kW heating element, expect hot water for 3 seconds, perfect choice for sinks to provide endless hot water any time.



ENERGY SAVING



This tankless water heater avoids standby heat loss of those bulky storage water heaters, minimize energy waste and achieve 95% energy saving with help of its smart self adjustment technology.



HEALTHY WATER QUALITY



MULTIPLE SAFETY PROTECTIONS



Over temperature protection



Dry heating protection



Leakage protection



Water and electricity line separated



EASY INSTALLATION



Real compact design, water heater cooridates with scenes decor, under sink water heater, Can be shelf, wall or floor mounted. Comes with easy installation brackets, pipe fitting of 1/2" NPT and 10AWG power cord(fixed to the unit) so you don't to have to hire a plumber even if you can do it.



SPECIFICATIONS



Power: 1.5kW



Voltage: 120V~50Hz



Min. water flow to activate the unit: 0.475GMP



Maximum temperature 167°F



Max. Amperage: 15A



Recommended wire size: 10AWG



Required circuit breaker : 1x1-Pole 20 AMP



KINDLY NOTE



1.The equipment is mainly used for sinks.



2.Mini-tank water heater should be installed professionally.



3.Please read instruction manual carefully prior to installation and use!

• The label on the right of the product is to allow customers to use the product more energy-savingly. We will improve the language expression in the future. We are very sorry.
• 【NOTE】Fill the water first, then power on (otherwise it will damage the water heater).
• 【SAFE DURABLE & LONGEVITY】304 Made of stainless steel and never rust，Anti-leakage plug，Multiple safety protection functions protect you from the risk of scald, leakage or other injury.Premium plastic shell is corrosion resistant，This mini hot water heater is ideal for kitchen, bar, school, hospital, community and RV.
• 【SMART INVERTER FOR ENERGY SAVING】Digital Display，Automatic heat preservation and storage of hot water, 3.0 gallon point-of-use mini-tank fits under your sink to provide hot water right where you need it. Thermal efficiency is 98%，Maximum temperature167℉，The built-in smart chip heats up to the temperature you set, and automatically Insulation when heated to the specified temperature.
• 【EASY TO USE】storage tank electric water heater with easy-to-operate knob temperature adjustment design，Easy to control warmth.Vent valve, Tee pipeline， pipes and other accessories are complete for quick installation without additional expenses or preparing time of accessories.
• 【FAST RECOVERY RATE】Eliminates long waits for hot water at your sink, get on demand hot water at your every need (supplies up to 2 sinks at a time，8-15 minutes to heat to your desired temperature).
• 【COMPACT DESIGN】Can be shelf, wall or floor mounted (Water inlet and outlet upward); Dimensions: 18.0''L x12.6''W x10.2''H; 8.86lbs; 1/2″NPT NPT. 1.5 kW, 110-120 volts. One-year warranty and 24H customer service support, feel free to contact us.

User questions & answers

Question:	Can I connect the water intake on this unit from the hot water supply from my house water heater? The house heater is very far from kitchen sink
Answer:	Yes you can connect this unit to the hot water supply line from your existing hot water heater and have hot water delivered to your kitchen sink. This unit will reheat the hot/warm water to the desired temperature. This should ensure you have continued hot water.
Question:	what is the lowest temperature this can be set at
Answer:	86℉
Question:	Brass tee provided does not seal on the hot water outlet, any tips
Answer:	The brass 3 way T is not meant to connect to outlet nipple. It needs the 1/2 in compression connector provided with it.
Question:	Can this be mounted laying down or does it have to be in a vertical position
Answer:	It is vertical

Product features

AGU 1.5Kw Mini-Tanks Water Heater Electric

Features

Saves Energy and Money - No need to preheat before using,no any waste for water or electricity.

Endless Hot Water - Digital Display，Maintenance-free bare wire heating systems.Depending on the region, the water temperature can be heated to 167℃ within 8-15 minutes.

Space Saving - Very compact designed, which can be wall-hung (bracket included) or floor-mounted，easy to install.

Hot water on call

Waiting for hot water at a sink located far from a primary heating source can be frustrating. Only having access to cold water from a sink is just not useful, and plumbing a hot water line to every sink in a home or business requires time and money. To get hot water where it’s needed, when it’s needed, a better solution is to use the AGUST: a point-of-use electric mini-tank heater. This heater can supplement a primary water heating source, or be used under a single sink and double sink. In fact, the AGUST can be used for three different applications: as a sole water heating source for a single sink, as a supplement to an existing heater located far from the sink, and as a buffer installed in-line with tankless water heaters that experience intermittent cold water, also known as 'cold water sandwiching'. No matter the configuration, there’s minimal stand-by loss from this premium mini-tank water heater.

INSTANTLY HOT WATER

As soon as you open the tap, the water flows with your desired temperature. The water is only heated in the amount and for the time you actually need it.

ENERGY EFFICIENT

It saves energy by producing hot water only when needed. Instant hot water flows out at anytime you need.

KNOB ADJUSTMENT

Equipped with a Knob adjustment control for stable temp. easy and convenient. Just turn the knob to the maximum and submit the temperature suitable for you through the faucet，Optimal energy efficiency is promised.

GREAT FOR SMALL SPACES

Water heaters are compact，It can be installed under the sink features a sleek and attractive design to blend seamlessly with decor, very friendly to any small spaces.

Product description

This Smart Technology electric tankless water heater is configured as a "whole home" model for climates where incoming water temperature is 62°F and above. The ECO 18 is capable of heating over 2.5 gallons per minute, which is the equivalent of one water saver shower head (with a 1.5 gpm flow) and one sink with a low inlet water temperature of 62°F, and an output setting of 105° F. Two showers emitting no more than 1.5 gpm each can be run simultaneously when incoming water temperature is above 70° F. Digital temperature control allows you to set your temperature in increments of 1°. All tankless water heaters are sized based on flow rate and temperature rise, and there is a direct relationship between the two. So if used in a cold area requiring a high temperature rise, it will be more limited in the amount of fixtures (gallons per minute) it can heat at one time compared to a warmer climate. However, when sized properly it will provide endless hot water and only consume the energy needed, giving the user complete control. Prior to purchase and installation please verify this model is the right size for the expected demand and electrical requirements. The ECO 18 requires a minimum 150 amp electrical panel for installation with 40 amp double pole breakers connected to sets of #8 awg wire. Plumbing connections are 3/4" NPT. For additional assistance please feel free to contact our support center at 877-474-6473.

From the Manufacturer

This Smart Technology electric tankless water heater is configured for climates where incoming water temperature is 62 Degree F and above. The ECO 18 is capable of heating over 2.5-Gallon per minute, which is the equivalent of one shower head (with a 1.5 gpm flow) and one sink with a low inlet water temperature of 62 Degree F. Two showers can be run simultaneously when incoming water temperature is above 70 Degree F in warmer climates such as South Texas, South Florida, New Mexico, Arizona and South California. These models come with a digital temperature control that allows you to set your temperature in increments of 1 Degree. Prior to purchase and installation please verify this model is the rights size for your hot water needs and electrical requirements.

• The product is highly durable
• The product is easy to use
• Manufactured in China
• Copper and stainless components
• Lifetime warranty for residential use
• Save up to 60% on your water heating costs with the most advanced, self modulating technology available
• Never run out of hot water with an ECOSMART tankless water heater.

User questions & answers

Question:	How do know which size to buy? We will supply two bathrooms, dish washer, clothes washer. What size should I choose
Answer:	I noted someone below stating they got the largest one and they can only run one water source at a time. My guess is they installed it wrong by not getting the electric hooked up right, or maybe the unit was just defective, or they live in Alaska. I went under size with an Eco 27 a few years ago because that’s all my electric panel could handle. We have zero issues in the summer. During winter months we can only run one shower at a time and have to slowly fill a tub (maybe 3/4 fill speed). To save as much money as I am on electric bill and have unlimited shower lengths (only 1 person at a time mid-Dec to mid-March) is totally worth it. On here today because I’m thinking of upping my panel size so was thinking of going with a larger one now. Regardless, CCRC’s experience with the largest unit not working is nothing like the experience I’ve had, and again I intentionally undersized mine for the house. The website has a clear chart to explain size you need based on number of water fixtures in your home and ground water temperature.
Question:	Can this unit supply a 3,700 sq foot home with 3 1/2 baths
Answer:	In the lower states it can, but in the northern states, multiple simultaneous users, it will be overloaded. If you can afford a 3,700 square foot home, then you can place a unit in each appropriate demand zone and be very glad you did. I love mine, live in KY, get great supply when the water is above 60 degrees, and then it slows the flow as the temperature drops. I have dishwasher, washing machine, garden tube, 2 showers, 3 sinks and 4 people. It is better than great in the summer, okay spring and fall, and we are conservative in the winter.
Question:	What is the power consumption of this tank-less heater
Answer:	The instantaneous power consumption while the hot water is running is quite high (up to 18kW or 27kW depending on which model you’re looking at on this page). However, when no hot water is being used, the power consumption is 0 (or a minuscule amount to run an LED light or something). The total power consumption over the course of several days or longer should be much lower than a tank heater but the short term power usage while the heater is making hot water will be much higher than a tank heater. It’s just that the unit sits idle most of the time while a tank heater will use power fairly frequently even when no hot water is needed as the water in the tank cools off over time and needs to be re-heater fairly constantly
Question:	remote
Answer:	This unit does not have the ability to have a remote temperature control.

Product features

3 Smart Steps for Endless Hot Water

Step 1: Determining your average inlet water temperature is important, this allows you to determine how well your unit will perform in your desired location. A lower inlet water temperature will require a higher kilowatt product.

Step 2: Next you will determine how many applications your unit can run simultaneously at your chosen location inlet water temperature. Tankless electric water heaters are sized for maximum simultaneous use, not maximum fixtures in your home.

Step 3: Determining specifications and electrical infrastructure is important because without the correct infrastructure your unit may not fit into your breaker panel.

Product description

120V - requires hard wiring. 1440W element. Magnesium anode rod. Rectangular shape with 2" of foam insulation. Glass lined tank for longer life. 6 year on heater and 1 year on parts for both commercial and residential use. Temperature/pressure relief valve included. Can be mounted both horizontally or vertically. Mounts on floor or wall. Meets ASHRAE 90. 1. See Info Page for technical and installation specifications.

Manufacturer Contact Information

800-283-3787

• CONVENIENT HOT WATER HEATER: 7 gallon point-of-use mini-tank fits under your sink to provide hot water right where you need it. Thermal efficiency is 98%. Dimensions : 17.5 W x 17.5 H x 14.5 D Inches
• INSTALLED VERTICALLY OR HORIZONTALLY: This larger model can be mounted vertically (7 gal. of water supply) or horizontally (5.1 gal. of water supply)- vertical orientation is installed with the cold and hot lines on top of the unit
• RELIABLE WATER SOURCE: Easily hard-wire the 7-gallon model to provide the on-demand reliable water source your home or office needs
• IMPORTANT INFORMATION: Heating capacity of 1440 watts and a temperature range of 65-145°F max. Operating pressure-150 psi. Water fittings-3/4 inch Male NPT. Electrical requirements (Amp 12A/Volts 120)
• EASILY MOUNTED: Can be shelf, wall or floor mounted (bracket included for vertical orientation only); simply tap into the cold water line and install the water heater directly at the sink to provide hot water

User questions & answers

Question:	What is the recovery time if the 7 gallons of hot water is used
Answer:	I have the 4 gallon tank and it is not too bad for the reheat
Question:	Can I reduce the pipe's size from 3/4 in to 1/2 in without any negative effect on the unit
Answer:	No harm to unit.....Max water flow will be reduced a little.
Question:	Can i use this to replace a small rv hot water heater
Answer:	Yes, but realize that it's electric and draws quite a few amps, most rv water heaters are propane.
Question:	The Manual request for the ES8 a 20 Amp breaker and 12GA wire. The wattage however is 1440 with 12 Amps. Why then 20 Amp breaker and not
Answer:	I would use a 20 amp circuit with 12 ga wire but there are no inrush concerns with a resistive load. A heating element does not have a higher initial current draw like a motor. It draws 1440 watts or 12 amps at 120v. Since 14 ga wire must be fused for 15 amps, this device by itself is already at 80% of the circuit’s capacity.

Product features

Bosch ThermoTechnology

The Bosch Tronic 3000 T point-of-use electric mini-tanks are available in three compact sizes, which can be wall-hung (bracket included) or floor-mounted. They fit easily under a sink, even in a cabinet space, and because they have a sleek and attractive design, they blend in seamlessly with existing decor when installed in a visible location. Simply tap into the cold water line and install the water heater directly at the sink to provide hot water. Great for a wide range of locations!

Water Where You Need It

Provides hot water quickly at point of use and comes with temperature /pressure relief valve installed - 2.5 and 4 gallon tanks feature a simple 120 VAc plug-in connection (1440 watts).

Quality for Long-Life

Thick CFC-free foam insulation for maximum energy efficiency, glass-lined tank for durability.

Great for Small Spaces

Water heaters are compact and lightweight and can be floor, shelf, or wall mounted (except 7 Gallon) - features a sleek and attractive design to blend seamlessly with decor.

Minimize Wait Time for Hot Water

Waiting for hot water at a sink located far from a primary heating source can be frustrating. Only having access to cold water from a sink is just not useful, and plumbing a hot water line to every sink in a home or business requires time and money. To get hot water where it’s needed, when it’s needed, a better solution is to use the Tronic 3000 T from Bosch: a point-of-use electric mini-tank heater. This heater can supplement a primary water heating source, or be used under a single sink. In fact, the Bosch Tronic 3000 T can be used for three different applications: as a sole water heating source for a single sink, as a supplement to an existing heater located far from the sink, and as a buffer installed in-line with tankless water heaters that experience intermittent cold water, also known as 'cold water sandwiching'. No matter the configuration, there’s minimal stand-by loss from this premium mini-tank water heater.

Product description

This electric tankless water heater is a true Point of Use Model because it is specifically designed for under the sink, single applications with a maximum flow rate of 0.5-Gallon per minute (gpm) and includes a 0.5 gpm sink aerator. This heater is flow controlled, meaning the temperature will adjust according to flow rate. It is the smallest sized Ecosmart electric tankless model and should not be used to run anything more than one sink at a time or used in areas where inlet water temperature is lower than 57°F. At this inlet temperature the ECO POU 3.5 can heat 0.5 gallons per minute to 105°F. Its compact size allows for under the sink installations. The Point of Use models are ideal for: Wet Bars, Strip Malls, Doctor's Office, Boats, Recreational Vehicles (RVs), Bathroom Sinks. When sized properly this water heater will provide endless hot water. Prior to purchase and installation please verify this model is the right size for the expected demand and electrical requirements. The Eco POU 3.5 requires a minimum 100 amp electrical panel for installation with 30 amp single pole breaker connected to #10 awg wire. Plumbing connections are 1/2" NPT. For additional assistance please feel free to contact our support center at 877-474-6473. TROUBLE SHOOTING STEP: When the water is not hot enough, please slow down the flow of water to increase temperature!

From the Manufacturer

This electric tankless water heater is a true Point of Use Model because it is specifically designed for under the sink, single applications with a maximum flow rate of 0.5-Gallon per minute (gpm) and includes a 0.5 gpm sink aerator. Its compact size allows for under the sink installations. The Point of Use models are ideal for: Wet Bars, Strip Malls, Doctor's Office, Boats, Recreational Vehicles (RVs), Bathroom Sinks. Prior to purchase and installation please verify this model is the rights size for your hot water needs and electrical requirements.

• Can provide hot water for one sink at 0.5 GPM in warmer climates
• Requires 1 x 30 amp breaker and 10 AWG wire
• For one sink at 0.5 GPM in colder climates the POU 6 is recommended
• Amperage Draw 29 amp. kW - 3.5 kW
• Connection Fittings 1/2" NPT

User questions & answers

Question:	Can the flow rate be adjusted up from 0.5gpm to say 1gpm or 1.5gpm (understood that the output water will be corresponding less hotter)? thanks in adv
Answer:	This is a 199,000 btu model, a 3/4" gas line is required to have sufficient gas supply.
Question:	degree water going in what degree will be at the tap
Answer:	rinnai recommends the GTK03 Grundfos kit for this unit
Question:	are any of these tankless water heaters plug in
Answer:	I think, you need buy a WiFi module, call Rennai and ask. Circ-logic did not work for me, I had to install re circulation pipe. Because of the high minimum flow requirements, this unit did not work with any regular re circulation pump, so wasted money buying a Watts pump. And paid double for the labor. Rennai told me that I should have bought their thankless heater with re-circulation built in.
Question:	Would you recommend this model for a shower in a guest bathroom
Answer:	IT CAME WITH ADAPTERS ON THE TOP. NO PIPING.

Product features

3 Smart Steps for Endless Hot Water

Step 1: Determining your average inlet water temperature is important, this allows you to determine how well your unit will perform in your desired location. A lower inlet water temperature will require a higher kilowatt product.

Step 2: This product is fixed flow, which means that the output temperature rise of this product is determined by flow rate of the application. This chart gives you the expected temperature rise for various sink flow rates from 0.5 to 1.5 gallons per minute.

Step 3: Determining specifications and electrical infrastructure is important because without the correct infrastructure your unit may not fit into your breaker panel.

Product description

FEATURES

Instant hot water comes with powerful 5.5kW heating element, expect hot water for 3 seconds, perfect choice for sinks to provide endless hot water any time.

ENERGY SAVING

This tankless water heater avoids standby heat loss of those bulky storage water heaters, minimize energy waste and achieve 65% energy saving with help of its smart self adjustment technology.

HEALTHY WATER QUALITY

Traditional bulky water tanks store water for long time, causing bacterial growth and rust issue, time to get clean water via a tankless hot water heater. The ECOTOUCH unit separates water and electricity line so as to avoid issue of calcium deposits.

MULTIPLE SAFETY PROTECTIONS

Over temperature protection

Dry heating protection

Leakage protection

Water and electricity line separated

EASY INSTALLATION

Real compact design, water heater cooridates with scenes decor, above sink or under sink water heater, horizontally, vertically or obliquely installation. Comes with easy installation brackets, pipe fitting of 1/2" NPT and 10AWG power cord(fixed to the unit) so you don't to have to hire a plumber even if you can do it.

SPECIFICATIONS

Power: 5.5kW

Voltage: 240V~60Hz

Min. water flow to activate the unit: 0.475GMP

Max tempt rise from 67°F to 109°F @ 1.2GPM

Max. Amperage: 23A

Recommended wire size: 10AWG

Required circuit breaker : 1x 2-Pole 30 AMP

KINDLY NOTE

1.The unit is mainly for sinks, not for shower purpose.

2.The tankless water heater should be installed professionally.

3.Please read instruction manual carefully prior to installation and use!

PACKAGE INCLUDES

1X ECOTOUCH 5.5kW instant water heater

1X Instruction manual

1X Installation accessories

1X Remote control(for Black model)

• 【INSTANT & SUFFICIENT HOT WATER】Applied with 5.5KW heating system, the electric water heater supplies instant, consistent and endless hot water of 116℉or higher temp shortly, no waiting for preheat nor terrible temp up & down, perfect companion for sinks. Time to get rid of those "lukewarm" toys.
• 【SMART SELF ADJUSTMENT】The hot water heater adjusts power input based on flow rate and temp setting in real time. For example, less power will be applied by the system when waterflow reduced, thus you still get ideal temperature instead of scalding hot water, which means comfortable experience. Optimal energy efficiency of 98% saves considerable electric charge.
• 【CONVENIENT USE】The tankless water heater comes with digital display & touch control panel so temp setting is easy job. Now turn on the tap and let the smart unit do the rest, you needn’t go through hard lesson about temp setting by a mixer tap without any hint. The Black model comes with Remote control, useful for installation under sink.
• 【SAFE and DURABLE】Applied with multiple protection devices, every piece goes through strict tests to ensure 100% safe. Inner water and electricity lines are designed to run separately so as to avoid leakage or harm of scale build up. Approval by ETL and qualifies for UL, you can expect outstanding performance for years to come.
• 【POINT of USE】The sleek tankless water heater is compact as an oatmeal box, making it possible to install anywhere close to outlet and avoid energy waste. It can be mounted horizontally, vertically, obliquely, ideal for kitchen, bar, school, hospital, community and hair salon. Please verify it is the right size for you: 5.5kW@240V; dimensions 11" x 7.5" x 2.35"; pipes fittings :1/2" NPT.

User questions & answers

Question:	Unit needs to be reset if power goes out, is this normal? I have to get a ladder out to reset
Answer:	Dear valued customer, Thanks for your trust in ECOTOUCH tankless water heater electric. We would like to clarify that ECOTOUCH tankless water heater turns on automatically when it detects water flow rate . When not in use, the tankless water heater goes into standby mode. If you get any question,please fell free to contact and we will do best to serve and assist. Wish you pleasant day! Best regards Vivian from ECOTOUCH
Question:	Can I take my shower with it
Answer:	Thanks for your message and we are deeply sorry for all the inconvenience that has caused. We fully understand the ECO55 unit does not get sufficient hot water for the shower purpose. If you need to use this water heater for shower, we would like to suggest you that you need to purchase a ECO90 water heater and then install them inline, under this condition, they will serve as a 14.5kW tankless water heater system, sufficient for shower purpose or 2 faucets at the same time. If you need any further assistance,please fell free to contact us and we will do best to serve and help. Rest assured, you will not suffer any loss from dealing with us, because we are a trustworthy company that will stand behind our products always. Wish you pleasant shopping! Best regards. Vivian from ECOTOUCH
Question:	Can this unit be used on a boat? I have a small 27' foot sailboat I would like to replace the older water heater
Answer:	If you have 220 volts on you boat
Question:	What type of fitting fits the intake side? It has a gasket that came with it. This side has a restrictor inside it it and needs somehting flush
Answer:	Dear Customer, Thanks for your trust in ECOTOUCH tankless water heater. You needn't consider about the filter inside the inlet pipe. Pipe connection is the same for both sides. Please use the leak-proof gaskets before you do pipe connection and connect the unit to hose with 1/2NPT connector. If the water quality in this district is not good, so the water must be purified with filter device. And we would like recommend the inlet side can be disconnected, flush to clean the filter periodically. If you have any other question during installation, please feel free contact us via [email protected] any time, we will do our best to help. Wish you pleasant shopping. Vicky from ECOTOUCH

Product features

Electric Tankless Water Heater For Sinks

Being one of those limited choices with smart modulation heating, ECOTOUCH tankless water heater provides instant & endless hot water with optimal thermal efficiency of 98% and minimum energy cost. Thus, the tankless water heater heats up 1.2GPM water from 67℉ to 109℉, which out runs most point use water heaters and will sure cut your electric bill.

Designed with compact size, it is one of perfect solutions for Kitchen & Bathroom Sinks, Wet Bars, Strip Malls, Doctor's Office.

Instant hot water and endless

As soon as you turn it on, hot water comes out immediately with desired temperature and sufficient flow rate of 1-1.5 gallon per minute, no waiting for preheat or standby energy loss. The best part is you get endless hot water now, 24h service, anytime you need. Perfect for sinks.

More hygiene

No storage in bulky water tank for long time heating, avoids bacterial growth and rusting issue that do great harm to water quality. Besides, water pipe and electricity heating are designed to run independently so as to avoid scale build up, now you get steady stream of clean and fresh hot water.

Smart modulation and energy saving

Equipped with a smart modulating control for stable temp, the hot water heater adjusts exact power input according to power calculation based on flow rate and temp setting in real time, which means you get still stable temp, instead of scalding hot, when you reduce flow rate. Optimal energy efficiency is promised.

Sleek & compact design

360 degree installation, lightweight design and compact as an oatmeal box, the tankless hot water heater is capable of and being located near by. It features a sleek and attractive design to blend seamlessly with decor.

Product description

MAREY GA10LP Indoor Propane Gas Tankless Water Heater can provide up to 2. 7 Gal. per minute for a perfect shower at 115°F output water temperature. It is also called water heater on demand, because it heats water only when needed, saving energy. It is designed in the USA and it's perfect to supply endless hot water for up to 2 or 3 points of use simultaneously (for a variety of residential hot-water applications). Its compact design saves space and is easy to install: you will only need 2-D cell battery for the ignition and a venting (not included in the box). MAREY has been on the water heating business since 1955, bringing tradition and innovation together.

• Provide endless hot water on demand and only as needed
• Save up to 60% on electricity bills for water heating
• Compact design saves space and is easy to install almost anywhere
• No electrical connection is required so it's perfect alternative for those homes experiencing frequent power outages
• Unlimited hot water whenever is needed
• 5-year
• Allows water temperature to be controlled

User questions & answers

Question:	What size box does it ship in
Answer:	Hello. The 10L ships in a box that measures approximately 16 x 28 x 10 inches. GadgetsGo is an Authorized Marey Distributor. Kind Regards, John M. GadgetsGo
Question:	For gas heater what is the outside dimensions, high , wigth , depth. Is it 23.6x13.6x6.9 with the extaust cap on top. Thanks, Ray
Answer:	Hi Ray. The dimensions you gave are for the body of the heater only, not including the exhaust cap, since it is removable, and not including the water and gas connections at the bottom.Kind Regards,RossGadgetsGo
Question:	Does it need to be vented
Answer:	yes i have one in an outdoor shower and the other inside a bathhouse and we put a 90 degree turn on it to go out the side of the wall and works just perfect.
Question:	Does this come with exhaust/vent pipes
Answer:	Greetings, The Marey Gas 10L Tankless heater does not come with the Exhaust/Vent pipes. You will need to locate B-vent or Z-Vent Pipe material size pipe 4" online.

Product features

Marey 10L Gas Tankless Water Heater

This compact model saves space and allows easy installation just about anywhere. It heats unlimited volume of water as needed and permits you to regulate the water flow and gas flow to better temperature. So if you instant and on demand want hot water, this is the product for you!

It is also a perfect alternative for those homes experiencing frequent power outages since this heater does not require electricity. The 10L unit provides up to 3.1 Gallons Per Minute, to provide hot water for your home family at multiple points of use!

Easy to install!

Multiple Points of Use!

Enjoy many features! Check temperature map below for more information on simultaneous points of use on your region.

Save Energy!

It can last a lifetime, keeping 87% efficiency level!

We are in the market since 1955!

GA10LP

Avaliable in Propane Gas.

GA10NG

...or also Avaliable in Natural Gas! Make sure you select your preferred gas type before you purchase your model.

Product description

:MOST IMPORTANT:

1. If you encounter problems during use, please contact our cs, we have a manual for answering questions for you refer to

2. The water heater is installed vertically, and the inlet pipe is installed below, and the outlet water pipe shoud be installed on above. Please make sure the water pressure is NOT LOW

3. The water heater connector are both G1/2(brass), Not suggest to use tape on connector, if you use tape at the interface of the outlet pipe, the water will slowly infiltrate into the water heater, the amount of seepage is very little and not easy to find. As time goes by, the water which infiltrate in water heater turns into steam, with the steam increases, the circuit is shorted and the water heater may burn out.

4. The problem of water not hot: the body temperature is generally 37 ° C (98.6 ° F), the temperature within 6 ° C changes, you feel the basic feeling of warm water, so the water temperature is 42 ° C (107.6 ° F), you may still feel just warm, not hot. As shown in picture 3, unless the inlet water temperature is high and the speed is low, the water temperature will be high, so generally you will only feel the water is warm, not cool, but not hot. IF YOU NEED VERY HOT WATER, PLEASE DON'T BUY



Specifications:

Material: Stainless Steel Shell

Color: Black

Power: 3000W

Current: 25-32A

Voltage: 110V

Rated Frequency: 60Hz

Rated Pressure: 0.4-0.6Mpa

Waterproof Grade: IPX4

Temperature: 30-55℃(Considering the use environment in severe cold areas may not reach the maximum temperature of 55℃)

Water pipe interface: G 1/2" interface

Size: Approx. 20 x 10.5cm / 7.87 x 4.13inch



Package Included:

1 x Water Heater

2 x Fixing Screws

2 x Screws Protector

1 x Manual



Note:

Please note this item should get the water first and then link the electricity when installing.

• Ⓐ NOTICE Before PURCHASE: The water heater need a larger than 32 amps circuit breaker; the outlet water temperature won't very hot because the water heater just 3KW, so it can't be used to bath or wash hair, it can be use to wash hand or use in kitchen. If it doesn't meet your require, PLEASE DON'T BUY.
• Ⓑ SIMPLE OPERATION: Freely adjust water temperature by water flow, simple operation, you can enjoy hot water all-weather without wait. PLEASE KINDLY check the third picture which show the water flow spped and water temp.(test data)
• Ⓒ SAFE USE: Safe heater, electricity saving, water saving, no pollution, no exhaust gas, LCD digital temperature display(℃). In order to ensure safe use, all current and voltage power problems are strictly tested to ensure product safety before leaving the factory.
• Ⓓ HIGH QUALITY MATERIAL: Stainless construction with mini design, the connter is made of brass, the tankless water heater is durable and portable.

User questions & answers

Question:	buenas amigo se puede intalar uno solo para toda la casa
Answer:	Si es bastante eficiente
Question:	Will this work for a bath room sink and shower
Answer:	Hi, dear customer, so glad to answer your question, yes, this can work for a bath room sink and shower, the intake speed and the influent water temperature determined the final outlet water temperature( show in the third picture), you can check if the outlrt water temperature meets your needs. In addition, since this water heater is 3000W, there are requirements for the wire. It is recommended that you consult your electrician if the wire meets the requirements. Welcome to contact us if you need, have a nice day!
Question:	Can this work good to wash hair in a hair dressing salon
Answer:	Hi, dear customer, I am sorry I can't make sure the temperature you need in wash hair, you can have a look of the third picture, if you think the temperature is ok, you can purchase this. Because of the power of the water heater, it is necessary to ensure that the wire can withstand the corresponding current. If you purchase this, suggest you to consult the electrician whether the wire is ok.
Question:	Will this work for a toilet
Answer:	I would. It take the risk. During the winter, toilets run cold. Introducing hot water to it could potentially lead to cracking the porcelain toilet

Product features

3000W Mini Electric Tankless Instant Hot Water Heater with LCD Display for Home Bathroom Kitchen Washing US Plug 110V

Common Faults and Solutions:

1. Under normal power-on conditions, the water flow turns on, the water heater displays the temperature, but the temperature does not rise, there are 2 possibilities: the first is that the temperature control switch (overheat protection switch) inside the water heater has tripped. Control switch, it can be restored. The other is the heating tube failure, replace the heat tube

2. If there is a display of no heating, the display shows rotating, but no temperature is displayed, indicating that the water flow has not passed through the water heater, or the water pressure is too low, and the water pressure needs to be adjusted; , Then check the water heater inlet turbine, it may be that the turbine is stuck, causing the water heater to not start.

3. It is recommended that the length of the water heater inlet pipe should not exceed 3 meters. If it exceeds, there may be a water pressure difference due to the length of the water pipe, and the water pressure is not enough to start. (If the water tank is used for water, the water tank is required to be placed higher than 10 meters to make the water pressure Reached the start value)

4. The display shows E1, E4/E5 means temperature sensor failure, first cut off the power, run the machine with cold water, and then power on; the heating tube failure displays E2, means the heating tube needs to be replaced.

Water Temperature

CAN this unit be connected inline with existing hot water line?

ANWSER: It is recommended not to use it in series with other water heaters. If it is installed on a hot water pipe, the water heater will reheat to above 60 degrees. There is a 60-degree over-temperature power failure inside the machine. After the power is off, the temperature control switch in the machine will jump. If you want to restore manually, you must open the back cover of the water heater machine. There is an overheat protection switch button next to the heating pipe. It can be restored by pressing it. If you do not go to the restore button, the water heater will not work and heat, so we generally do not recommend installing it in the heat The water pipe is directly installed on the cold water pipe. It is recommended that the inlet water temperature should not exceed 30 degrees

CAN we set two of these up would 1 preheat water to warm & the other heat it to hot for higher temperatures at higher flow rates?

ANWSER: NOT recommended, when two water heaters are used together, it will reach 6000w, and there will be high requirements for wires. For safety, it is not recommended to use this.

Installation

Product description

V65eP is the perfect combination of high efficiency, comfort and value in a propane gas tankless water heater from Rinnai. Ideal for small to medium homes or remodels, compact, easy-to-install, reliable and perfect for outdoor locations; Rinnai products provide peace of mind with warranties that surpass the competition.

From the Manufacturer

Rinnai's V65E exterior-mount tankless water heater efficiently delivers up to 6.6-Gallon per minute (GPM) of hot water, making it perfect for your one to two and half bathroom home. This easy-to-install, ultra-compact unit lets you enjoy all the benefits of Rinnai tankless water heating. You'll experience clean, reliable hot water at a consistent pre-set temperature, while saving energy and precious floor space in your home.

• Endless hot water for your entire home
• V65eP HE High Efficiency Tankless Hot Water Heater - Propane: Outdoor Installation Only
• Up to 6.5 GPM hot water flow rate (varies by groundwater temp)
• Control-R 2.0 mobile app features timers and schedules throughout the day and allows you to remotely put the system into vacation mode.
• Residential Factory Warranty - 120 months (heat exchanger), 12 months (labor), 60 months (parts)

User questions & answers

Question:	Can the temperature output be adjusted to 105F
Answer:	Most rinnai tankless weather it is out door or indoor, have a control board to adjust temp and either on or off
Question:	Can I use the Rinnai V65EP in Denver, Co? Temperatures during the winter can get below zero
Answer:	It can definately be out doors in freezing temps, tho power failure arent good for it while in a freeze, tho keep in mind it will use alot more energy for frost protection, indoor units are safer amd more efficient in this case
Question:	Does this unit come with controller? rinnai tech said i needed a mc-91-2us controller? do i need to buy separate
Answer:	I bought model V65EN. It came with a wired digital controller. The installer did not run the wire into the house and mount the controller indoors. He simply set the controller at 120 degrees and left the controller inside the unit. If I want to change the temp, I have to take the cover of the unit.
Question:	What does the "Low NOx Mean
Answer:	Good place to check for info like this is Wikipedia. Here is what they say: Energy efficiencieseditMore tangible cost savings are defined when comparing the energy efficiencies of gas heaters with low NOx emissions with conventional flued types. Gas heaters with emission problems are flued and inherently lose substantial energies in the form of hot flue gases to the atmosphere. In addition, the choice of placement of flued heaters is greatly impaired due to flue installation restrictions.In contrast, dedicated low emission gas heaters do not require a flue system. Furthermore, with the introduction of oxygen depletion sensors and thermostatic controls, they do not place critical reliance on ventilation as previously was the case. These heaters can be positioned more conveniently and centralised to affect optimum warm air distribution. By definition unflued low NOx gas heaters are 100% efficient as all heat energy released from the flame is converted to useful heat.Hope this helps. June

Product features

Endless Hot Water

Put an end to scheduling your hot water need.

• Never again choose between taking a piping hot shower, doing a load of laundry or running the dishwasher. A Rinnai Tankless Water Heater will never run out of hot water and leave you in the cold.

Hot Water On-Demand

Don't waste while you wait.

• Rinnai tankless water heaters with ThermaCirc360 technology recirculates hot water through your pipes to get you hot water fast.
• While you wait for hot water to travel from your old tank to your shower, you can waste the equivalent of twenty-four 16-ounce bottles of water every time. ─ that means an average of 8,700 bottles of water per person, per year.

Save Valuable Space

Your hot water heater doesn't have to be a behemoth!

• Compact design allows for installation in non-traditional spaces such as the attic, crawl space or even a closet.
• Save 16 sq. foot of space ─ the Rinnai tankless water heater is only the size of a small suitcase.

Affordable, Efficient Savings

Efficiency packaged in a compact design means cut CO2 emissions (as compared to tanks), use less energy and conserve water.

• Use 40% less energy than traditional tanks* because you heat water only when you need it.

100 years of Confidence

Get peace of mind with the unsurpassed quality and innovation of a Rinnai tankless water heater.

• Trust the #1 selling gas tankless water heating brand in North America for all of your water heating needs.
• Smart technological advancements such as WiFi monitoring, your trusted Rinnai service provider can monitor the efficiency of your tankless water heater and address issues before you ever experience a break in service.

Sustainable Reliability

It's a smart investment for now and the future when you intertwine sustainability and reliability.

• Every part of a Rinnai Tankless water heater is replicable so components can be easily swapped vs. buying a whole new system.
• Average life expectancy is 20 years vs. 8-10 for a traditional tank**
• With this premium product, you'll save–both money and worry–in the long run.

Product description

FEATURES-

◆ Minimize Wait Time for Hot Water

The Thermoflow UT15 is a point-of-use electric mini-tank heater which can stores up to 4.0 Gallons (15L) of water to supply hot water quickly. This heater can supplement a primary water heating source, or be used under a single sink. There’s minimal stand-by loss from this premium mini-tank water heater, saves water by eliminating the wait for hot water to reach your faucet.

◆ Active Protection Circuit for Safe Installation

If the water heater does not come out with hot water when it’s already connect to the electric supply, then the water heater will cut off the electric supply automatically to prevent the water heater from overheat. This also reduces the risk of damage to the water heaters.

◆ Thermostop function,Low Standy Loss Power Consumption

Selectable temperature range between 45℉ to 167℉, two modes options, energy saving mode and frost protection mode, suitable for any season.The maximum temperature raise is 167℉(75℃) for 4.0 GPM and the minimum temperature raise is 45℉（7℃).This also reduces the risk of damage to the water heaters.



IMPORTANT TIPS-

1. A SAFETY VALVE IS NECESSARY FOR INSTALLATION!

2. DO NOT install heater in a location where there is a potential for freezing.

3. BEFORE you connect the device to the electrical supply the device must be filled with water.

4. DO NOT remove the heater cover or open the unit without first turning off the power at the breaker panel.

5. Please read the instruction manual carefully before you install or using the water heater !



PACKAGE INCLUDES -

1X 4.0 Gallons mini tank water heater

2X 1/2“ NPT brass bushings

​​1X Water relief valve

1X 1/2“ NPT Connector

1X instruction manual

NOTICES: Shower head ,pedestal and water heater hose are NOT INCLUDED!



Inquiry & aftersales service: [email protected]



Hotline:＋1（844）334-4203

• ➤ 4 GALLON CAPACITY - 4 gallon point-of-use mini-tank fits under your sink to provide hot water right where you need it. Stainless steel tank and heating element designed for efficiency, durability and long life service (Relief Valve has been upgraded)
• ➤ Save Energy - Low stand-by loss power consumption. With Advanced Thermostop Technology of Germany, stop heating or reheating automatically when the water heater reaches a high or low set temperature
• ➤ EPS FOAMING TECHNOLOGY - Heating water quickly and better insulation, fast recovery rate eliminates long waits for hot water at your sink
• ➤ SAFE & RELIABLE - over-heat protection, auto cut-off electricity if not hot water come out, IPX24 water proof, 2.6ft plug in cord, suit for kitchen, bathroom, bar, school, hospital, office and RV.
• ➤ NOTES - Please verify that this model is the right size for your hot water needs and electrical requirements before purchase & installation. Dimensions: 18H x 12.2W x 11D inches; Weight: 14 lbs; Water connections: 1/2 inch NPT, Electrical requirements: 1.5 kW, 120 Volts. Max pressure: 150PSI. Nominal current: 13A.

User questions & answers

Question:	CN this be used as main hot water supply for a travel trailor
Answer:	It comes with two.
Question:	Could it be used for one sink and a shower in my fishing camp
Answer:	3 3/4 inches from left to right and top to bottom you need a 3 1/4 hole saw to install it
Question:	Can you be clear on the measurements please
Answer:	a basic 12 volt system, red to a live wire when running, yellow "memory" to permenent live wire, black to ground. i didnt mess with the usb cable
Question:	Does it work for a shower in a rv
Answer:	Pick the free shipping option

Product features

Electric Point of Use Water Heating Solutions

Low Standy Loss Power Consumption - Selectable temperature range between 45°F to 167°F, two modes options, energy saving mode and frost protection mode, suitable for any season.

Minimize Wait Time for Hot Water - Maintenance-free stainless steel tank and EPS foaming heating system. Stores up to 4.0 Gallons of water to supply hot water quickly. There’s minimal stand-by loss from this premium mini-tank water heater, saves water by eliminating the wait for hot water to reach your faucet.

Electric Point of Use Mini Tank Water Heaters

Thermoflow UT15 electric mini tank water heater is a true Point of Use Model because it is specifically designed for under sink. In fact, the Thermoflow can be used for three different applications: as a sole water heating source for a single sink, as a supplement to an existing heater located far from the sink, and as a buffer installed in-line with tankless water heaters that experience intermittent cold water, also known as 'cold water sandwiching'. No matter the configuration, there’s minimal stand-by loss from this premium mini-tank water heater.

Quick Hot Water Supply

Thermoflow UT15 Mini-Tank Water Heater fits for under sink. Provides hot water in seconds at point of use, perfect for a basement wet bar, patio kitchen station, garage, attic, or even in an RV or on a boat, hot water will quickly be in hand.

Saving Energy

Short distance hot water supply, minimize wait time for hot water,saving energy and your bills. Whether as a sole water heating source for a single sink or as a supplement to an existing heater located far from the sink, this premium mini-tank water heater's stand-by loss is minimal!

4.0 Gallons Capacity

4.0 gallons capacity maintenance free stainless steel tank, stores up to 4.0 gallons water to provide hot water where you need it. Fast recovery rate eliminates long waits for hot water at your sink. Supplies up to 3 sinks at a time.

Great for Small Spaces

Water heaters are compact and lightweight and can be ground mounted - features a sleek and attractive design to blend seamlessly with decor, very friendly to any small spaces.

Auto Cut-Off Protection for Safety

If the hot water temperature higher that the set temperature, water heater will cut off the electric supply automatically to prevent the water heater from overheat. This also reduces the risk of damage to the water heaters.

Maintenance Free Stainless Steel Tank

Thermoflow UT15 Mini-Tank water heaters are stainless steel tank designed, which is easy to maintain and durable for long life. Also it is high efficiency for heating, saving energy and your bills.

Plug-In Style, Easy to Use

Very easy to install, just plug into a 120v electric supply socket (35 inches power cord includes). Simply tap into the cold water line and install the water heater directly at the sink to provide hot water. Whether you need the thermoflow UT15 for a basement wet bar, patio kitchen station, garage, attic, or even in an RV or on a boat, hot water will quickly be in hand.

Product description

The ECO line by Marey is designed using SMART Technology. It is the only one in the market that does not accumulate sediments, as the water never touches the heating element! The 220V ECO110 by Marey provides 11kW of power, being the perfect solution for 1 point of use in Southern areas (a shower and a sink). This unit provides 28°F increase at 3. 0 GPM, allowing you to have a shower and a sink running simultaneously in hot climates. The 220V ECO110 reaches 56 °F at 1. 5GPM for hot water output at one point of use at time. In colder regions, the 220V ECO110 is suitable to provide hot water for a single point of use such as a sink. Marey´s 220V ECO110 is ETL approved. It performs best in the US Southern regions where the incoming water temperature is above 70°F. This unit must be installed no more than 40 feet from the intended point of use. The complete ECO line by Marey is designed with corrosion resistant heating elements which reduce hard water build up from chlorine and calcium.

• The 220V ECO 11kW unit is ideal for 1 simultaneous points of use in US Southern Regions where the incoming water temperature is above 70°F. In colder regions, it is suitable for a sink at 1. 3 GPM.
• German-designed with high quality stainless steel water channel and heating chamber.
• SMART Technology: Easy management and simple adjustments on a LCD Panel allows you to program the exact desired water temperature thereby optimizing electricity consumption.
• Requires 60 Amp breaker and must be installed by a professional plumber or electrician to ensure safety and quality.
• Marey’s ECO line can maintain 98% efficiency level throughout their lifetime.

User questions & answers

Question:	How to instal it
Answer:	Hello Domingo. Complete installation instructions are on the official manufacturer's owner's manual here https://gadgetsgo.com/images-manual/Marey-Eco110-2016_12_27_manual.pdf GadgetsGo is an Authorized Marey Distributor. Kind Regards, John M. GadgetsGo
Question:	What is the fitting for the pvc inlet and outlet
Answer:	Hi Judy. PVC should not be used for the hot water connection. Instead use copper, CPVC, or other high-temperature rated pipe. You may use PVC for the cold water connection. GadgetsGo is an Authorized Marey Distributor. Kind Regards, John M. GadgetsGo
Question:	can i use a double 25 amp *50 amps
Answer:	I think it takes a 60 amp
Question:	What size is the out put line
Answer:	Hello Cindy. Both water inlet and outlet connections are 1/2" NPT. Feel free to ask us any other questions. GadgetsGo is an Authorized Marey Distributor. Kind Regards, John M. GadgetsGo

Product description

Extensive applications



This 8l water heater is a lightweight electric water heater with a perfect combination of inner quality and classical appearance, which applies for multiple demands of different families. It can be placed in the space exquisitely where is decorated by you elaborately, and embellish your furniture much more wonderfully. This product uses green environmental material, which is qualified for international standard, and satisfies difficulties of hot water supply for multiple places, easily solves issues such as face washing, bathing, vegetable washing and dish washing. It can be installed in the kitchen, rest room, bathroom or any other places you want optionally because of its characteristics of small area, strong applicability and convenient installation.



Easy to Use



It is a directly heating type with high efficiency and low power heating tube, which can take advantage of the thermal energy maximally. The temperature can be adjusted between 55℃-75℃ optionally, and the power will be off automatically when the set temperature is achieved. Its total power is 1500w and it has multiple installation methods. It is applicable for different water pressure of different areas, especially for families which are located on higher floors with low water pressure.



Technical Parameter



Rated voltage: 110V 50HZ



Rated power: 1500W



Temperature adjustment scope: 55℃-- 75℃



Minimum water pressure: 0.02MPa



Water-Proof level: IPX4



Include



1x Body of water heater



1x Operation manual

• ✅【Electric Water Heater】- The Temperature can be adjusted between 55℃-75℃ optionally, and the power will be off automatically when the set temperature is achieved.
• ✅【 Instant Hot Water Heater Under Sink】- Its total power is 1500w and it has multiple installation methods. It is applicable for different water pressure of different areas, especially for families which are located on higher floors with low water pressure.
• ✅【Rv Tankless Water Heater】- This mini tankless water heater electric 110v product uses green environmental material, which is qualified for international standard, and satisfies difficulties of hot water supply for multiple places, easily solves issues such as face washing, bathing, vegetable washing and dish washing.
• ✅【Water Heater Blanket】- This water pre heater is a lightweight electric water heater with a perfect combination of inner quality and classical appearance, which applies for multiple demands of different families. It can be placed in the space exquisitely where is decorated by you elaborately, and embellish your furniture much more wonderfully.
• ✅【Water Heater Electric】- It can be installed in the kitchen, rest room, bathroom or any other places you want optionally because of its characteristics of small area, strong applicability and convenient installation.

User questions & answers

Question:	Could this be used with my mixer shower
Answer:	The lowest temperature setting is 110 degrees, and the max is 212 degrees. It allows settings in 10 degree increments from 110-200.
Question:	Is it suitable to be installed under a sink
Answer:	Thank you for your inquiry. The range is from a minimum of 110 degrees F to 212 degrees F.
Question:	Please provide dimensions
Answer:	A tea kettle is one of the choices for this listing.
Question:	Can you install it laying on its side
Answer:	It is not Alexa smart BUT you can easily buy a wall outlet or plug which is, and then name it Tea Kettle (or whatever you want) and then just tell Alexa to turn the "tea kettle" on/off. https://www.amazon.com/Insteon-Independently-Controllable-Technology-Reliability/dp/B00QL8EPME

• Whole home indoor, gas powered tankless water heater, rated at 3.6 GPM that activates only when in use, making it an energy saver.
• For indoor installation with safe, efficient power ventilation and perfect for any small home, cabin or apartment.
• Easy to read digital temperature display, on a compact and space-saving design with minimal noise output.
• Safe electronic ignition system; plugs into standard 120v electrical outlet with UL-listed cord.
• Uses standard 1/2" NPT water fittings and is equipped with easy to use manual water temperature controls.Minimum 0.65 GPM flow rate

User questions & answers

Question:	service number
Answer:	785-477-8702
Question:	How much current does it draw
Answer:	Hello Donna. Thank you for your question. This unit uses 120v, 60Hz and draws 2 amps.If we've helped you, please prefer us when you purchase on Amazon. Kind Regards,RossGadgetsGo
Question:	can i vent this thru a masonry chimney
Answer:	It needs to be ported outside.
Question:	What is the highest temperature achievable from this water heater? Will it produce temperatures in excess of 150 degrees F
Answer:	Assuming you have everything hooked up correctly, at 3.5 GPM, the MAX TEMP will be NO MORE THAN 55 degrees ABOVE THE TEMPERATURE OF THE INCOMING WATER. For example, if the incoming water temp is 50 degrees in the winter, then the max winter temp will be 105. In the summer, when the incoming water is 65 degrees, the max summer temp will be 120 degrees. This is the way ALL demand heaters work. Be SURE to check the TEMPERATURE RISE specification on ANY demand heater to know what it is truly capable of. If the TEMP RISE is specified at 3GPM, and you try to set it higher, it may CUT BACK THE FLOW RATE to achieve the higher temp, but it will NEVER exceed the TEMP RISE spec.

Product features

FVI12 Indoor Liquid Propane Tankless Water Heater

• Whole home indoor, propane-powered tankless water heater, that activates only when in use, making it an energy saver.
• For indoor installation with safe, efficient power ventilation and perfect for any small home, cabin or apartment.
• Easy to read digital temperature display, on a compact and space-saving design with minimal noise output.

• Safe electronic ignition system; plugs into standard 120-volt electrical outlet with UL-listed cord.
• Uses standard 1/2" NPT water fittings and is equipped with easy to use manual water temperature controls.

Prefect for Cabins!

Perfect for Tiny Homes!

Perfect for Apartments!

Perfect for Businesses!

Is this the right water heater for you?