11 best water heater straps home depot

Product description

Prepare and prevent: an operating water heater which falls off its place can cause extreme injury, severe burns and Gas explosion. It kills people and burns down homes. Protect yourself and your family. Secure your water heater to the wall by mounting 2 Everflow restraining straps tightly around the top and bottom of the heater. According to the residential building code, water heater anchors are required for residents from certain seismic locations. But since water heaters may move out of place Due to various reasons other than earthquakes, we do recommend this extra security protection to all water heater owners across the globe!

• SAFETY: secures water heater to wall, preventing extreme injury and explosion
• SUPERIOR QUALITY: durable galvanized steel construction for ultimate protection
• COMPLETE KIT: includes 2 adjustable straps, brackets, screws, nuts and washers
• ADJUSTABLE FIT: works with any size heater, up to 80 gallon
• COMPLIANCE: complies to The Residential Building Code and Uniform Plumbing Code

User questions & answers

Question:	Will it fit a 50 gallon water heater
Answer:	Let me know if you find out. Phone and email get no response
Question:	The description says "Size 90 inches". Is that the length of each strap
Answer:	Hello, no, the GPS model will be available on next year.

Product description

The Watts Hot Water Recirculating Pump provides hot water at every faucet or shower when needed, eliminating wasted water and saving up to 15,000 gallons per year. It is easy to install on any water system and requires no additional piping. The unique design of the pump ensures quiet, maintenance-free operation. The system includes a built-in 24 hour, a dual setting programmable timer to activate the pump only when needed. Please note this will not work with a tankless water heater.

From the Manufacturer

The Watts Premier hot water recirculation pump puts hot water at every tap when you want it. Saves up to 15,000 gallons per year. The pump brings convenience and savings to your home, giving you hot water instantly at every faucet, when you need it. This unique product is easy to install and not only provides you with the convenience of hot water when you need it, but saves an average of over 11,000 gallons per year. *May not work with a tankless water heater.

• Kit includes a pump with timer with 10' cord, 2 adapters with rubber washers, valve mounting screws, sensor valve, and two 12-inch supply lines
• Voltage: 120 volts, Item Weight: 8.5 pounds. Overall Dimension: 6.2 x 6 x 5 inches
• Provides hot water at every faucet or shower when needed and helps eliminate wasted water
• Easily installs to existing plumbing and is maintenance-free
• 24-hour programmable timer activates pump when you need it

User questions & answers

Question:	How many amps is the pump
Answer:	The pump runs at .22 Amps, and recommended supply current of 2.5 Amps. A standard 15 Amp wall socket is all that you need to plug it into. The .22 Amps the pump indicates maximum start up current, actual running current will be somewhat lower. Inrush current is always higher, when the motor has to start up, actual running current will be lower, example a 1 HP motor will have an inrush current of about 34 Amps, just until the motor reaching normal operating speed then it drops down to around 7.5 Amps, quite a bit lower, but the breaker needs to be able to handle the inrush currents.
Question:	can i used without the sensor valve
Answer:	Yes.As long as you have a return line running back to your water heater. You do not need a separate return line at every faucet. You need one return line. Follow your hot water pipe to the end (last branch takeoff), cut in a tee and run pex or copper. At the bottom of your tank style water heater there is a small, usually plastic valve. Remove that valve and screw in a 3/4" brass or stainless pipe nipple. Then install a tee inline with side outlet looking up and in the end of the tee put a brass drain valve to replace the crappy plastic one if applicable. The side connection on the tee you installed is where you will connect your return line you just ran. I did not notice if this pump had a built in check valve but if not you may want one to prevent water from flowing through both the hot water main and the hot water return to the faucet nearest the end. Water will follow the path of least resistance so the last branch on the main usually ends up being similar in distance to the water heater from either line. As a result water can back feed up the return line and will bring the cold water entering the tank with it. This is especially true when a second source of hot water is being used at the same time hence the need for a check valve.
Question:	If the pump is on, and the water is hot, the sensor valve closes, right? Isn't the pump trying to push water against a totally closed line
Answer:	This type of pump is designed to operate with zero flow, and it actually uses a little less electricity when it is not moving water. When the sensor valve closes, the pump does not move any water. When the sensor valve reopens, the pump moves water from the hot water line into the cold water line.
Question:	So what this does is move the hot water through the pipes constantly, not just when you need it? Seems like an energy suck. Is it
Answer:	If you run this all the time you will likely increase your water heating costs significantly as you are turning your pipes into a big radiant heater. You can use the built in timer to only have it come on at set periods, but this will only work if you have a very fixed schedule. I attacked this another way. I plugged the unit into a TP-Link HS110 Smart plug that is Alexa controlled. I can just say turn on hot water pump or turn off hot water pump when I want to control it. But that was not good enough for me. I found that if this pump ran for four minutes it would give me hot water at the distant shower that I wanted, so I did the following. I wrote a routine to turn on the pump, wait four minutes and then turn it off. While I can run this by voice, I bought the new Amazon Alexa Button, they are about $14 for a two pack. The button is battery operated and communicates to another Alexa device. Just before I take a shower I push the button and within four minutes the water will be hot without having to run water.

Product features

Includes Everything Needed

Pump with timer and 10 ft. electric cord, two adapters with rubber washers, valve mounting screws, sensor valve, two 12 in. supply lines

Easy Installation

Easy to install, usually less than one hour.

Save Money

Save money, up to 10% of your water bill annually.

Product description

This Smart Technology electric tankless water heater is configured as a "whole home" model for climates where incoming water temperature is 67°F and above. This model is well suited for heating up to 2-Gallon per minute, which is the equivalent of one shower head (with a 1.5 gpm flow) and one sink with a low inlet water temperature of 67°F and an output setting of 105°F. Digital Temperature Control allows you to set your temperature in increments of 1 Degree. This model can also be used in colder climates as a Point of Use for a sink or other low flow application. All tankless water heaters are sized based on flow rate and temperature rise, and there is a direct relationship between the two. So if used in a cold area requiring a high temperature rise, it will be more limited in the amount of fixtures (gallons per minute) it can heat at one time compared to a warmer climate. When sized properly this water heater will provide endless hot water and only consume the energy needed, giving the user complete control. Prior to purchase and installation please verify this model is the right size for the expected demand and electrical requirements. The ECO 11 requires a minimum 125 amp electrical panel for installation with 60 amp double pole breaker connected to set of #6 awg wire. Plumbing connections are 1/2" compression fitting with the option of 1/2" NPT adapter included. For additional assistance please feel free to contact our support center at 877-474-6473.



NOTE : 11Kw at 220 is equal to 13kw at 240. .Activation Flow : 0.3 GPM

From the Manufacturer

This Smart Technology electric tankless water heater is configured for climates where incoming water temperature is 67 Degree F and above. This model is well suited for heating up to 2-Gallon per minute, which is the equivalent of one shower head (with a 1.5 gpm flow) and one sink with a low inlet water temperature of 67 Degree F. Digital Temperature Control allows you to set your temperature in increments of 1 Degree. This model can also be used in colder climates as a Point of Use for a sink or other low flow application. Prior to purchase and installation please verify this model is the rights size for your hot water needs and electrical requirements.

• Lifetime warranty
• Save up to 60-percent on your water heating cost with an ECOSMART electric tankless water heater
• Never run out of hot water with an ECOSMART tankless water heater
• Patented Self Modulating Technology and design
• ECOSMART tankless water heaters are 99.8-percent energy efficient.Uniform Energy Factor:0.98

User questions & answers

Question:	Ours has only been in service for less than a year - will not adjust temperature to anything above 85 Deg. F. What do you think is the problem ? kds
Answer:	My only guess is that the rheostat (variable resistor) that the temperature adjustment knob is attached to may be faulty. If that isn't it then I don't know. Sorry.
Question:	The warrenty says that this unit must be installed by a licensed electrician and plumber, for them to honor the "life time warrenty." why
Answer:	Hello Bob, The reason is the same as why an innumerable number of gadgets around the world have that little "warranty void if removed" label. Because getting inside of one requires a certain level of training and expertise. Same with this unit. GadgetsGo is an authorized Ecosmart dealer. Kind regards,HenryGadgetsGo
Question:	My house is wired 110V. What additional items do I need to purchase for the conversion
Answer:	Just to expand slightly on prior answers, normally a residential service feed is 240 volts between the two incoming hot legs. There is also a neutral leg, which (hopefully) has zero potential with reference to ground. The voltage between either one of the hot legs and the neutral leg is 120 volts. The 120 volt circuits in your house are connected to one or the other of the two hot legs, and only one. An attempt is made to assign circuits to the two hot legs in a way that will roughly balance the load between them. The other side of a 120 volt circuit is connected to the neutral leg. There is additionally a safety ground run with the circuit, which also ties into the panel. Certain devices require more power (work product of current and voltage) than is practical to deliver using a 120 volt circuit. Common examples are your clothes dryer, and your electric stove. These devices are powered by both hot legs, with a difference in potential of 240 volts. This water heater is also such a device.STRONG BUT FRIENDLY WARNING: If you did not already know this, please don't make wiring this water heater your learning opportunity with electricity. Hire someone who knows how to do it right. Cutting corners, especially with higher currents and voltages, can lead to equipment damage, fire, and electrocution. Electricity is not magic, and you can certainly learn how to do many common wiring tasks safely on your own, but today is not the day to begin that journey. You need properly sized components, properly installed, and connected to an adequate service. Also, if you really, really foul up, you could conceivably wind up making that morning shower more energizing than you ever imagined, if you get what I mean. So newly aspiring electricians should go fix their grandmother's favorite table lamp instead. Once they have that working they can use it to to start reading books about electricity, residential wiring, and eventually, books about this stuff: http://amazon.com/s/ref=nb_sb_ss_c_0_8?url=search-alias%3Dstripbooks&field-keywords=nec+code&sprefix=nec+code%2Caps%2C164 . Of course, you still have to know not to nick conductors when you strip them, and other trade craft like that ; ) . Like almost everything in life that is fun, electricity will hurt you. Sort of like all those people you dated for a while, and then wished later you had never met.
Question:	what amp breaker is required
Answer:	The National Electrical Code requires conductors and overcurrent protection to be sized at 100% of the manufacturer's branch circuit recommendation for tankless electric water heaters. A 60 amp breaker is the same price as a 40 or 50, it is the wire that costs more. #6 AWG wire is required for a 60 amp circuit. If you undersize the wire it could overheat and catch fire. Protect your family and follow the manufacturer's sizing for this, or any other, electrical device. Your family's lives are worth the extra money. 

Product features

3 Smart Steps for Endless Hot Water

Step 1: Determining your average inlet water temperature is important, this allows you to determine how well your unit will perform in your desired location. A lower inlet water temperature will require a higher kilowatt product.

Step 2: Next you will determine how many applications your unit can run simultaneously at your chosen location inlet water temperature. Tankless electric water heaters are sized for maximum simultaneous use, not maximum fixtures in your home.

Step 3: Determining specifications and electrical infrastructure is important because without the correct infrastructure your unit may not fit into your breaker panel.

Product description

Get hot water where it's needed, when it's needed with the Bosch ES4 Tronic 3000 T Electric water heater. This 2.5-gallon capacity point-of-use mini-tank fits right under your sink and provides a practical and effective solution to your hot water needs. This smaller model can be plugged right into a 120-volt outlet with the 36-37" cord, or can be installed in-line with a larger hot water source to provide "on-demand" use. The glass-lined tank offers great insulation and added durability, while the heater's fast recovery rate eliminates long waits for hot water. An external dial allows you to easily control the temperature range, and the temperature-and-pressure relief valve enhances your safety. The ES4 Tronic 3000 T from Bosch has a sleek and attractive exterior design that blends in seamlessly with existing decor when installed in a visible location, making this heater a great option in any room.

Manufacturer Contact Information

800-283-3787

• CONVENIENT HOT WATER HEATER: 2.5 gallon point-of-use mini-tank fits under your sink to provide hot water right where you need it. Thermal efficiency is 98%. Dimensions : 13.75 W x 13.75 H x 10.75 D Inches
• LONG LASTING QUALITY: This electric water heater is easy to maintain and has premium glass-lined material for a long service life. (Amps 12A, Volts (VAC) 120)
• INDEPENDENT INSTALLATION: 36-37" cord plugs into a 120 volt outlet for independent installation or in-line with a large hot water source
• FAST RECOVERY RATE: Eliminates long waits for hot water at your sink, get on demand hot water at your every need (supplies up to 2 sinks at a time)
• EASILY MOUNTED: Can be shelf, wall or floor mounted (bracket included); simply tap into the cold water line and install the water heater directly at the sink to provide hot water

User questions & answers

Question:	Is it necessary to connect an expansion tank to this heater (for safety purposes)? It states something to that effect in the user manual
Answer:	The expansion tank for this heater is not required. Most people already have these installed in their homes but if not then it would be Ok without it as there is a pressure relief valve on top if something happened. GlobalTowne is an authorized Bosch distributor.
Question:	would this be able to supply a shower
Answer:	A standard flow shower head is around 2.5 gallons per minute. A low flow head is around 1.5 gallons per minute. The recovery rate for a 90 degree temperature rise is 6.8 gallons per hour! So even the 7.5 gallon unit would only provide 4 minutes of shower time before the temp dropped off dramatically. (even at the low flow rate..)
Question:	Can be used "in-line with a large hot water source"? Would it help a large bathtub that runs out of hot water before it gets full from main tank
Answer:	If your bathtub is bigger than your main heater tank, this unit isn't going to do much for you. It will add 2.5, 4, or 7 gallons to the capacity of your main tank, depending on which Bosch unit you buy. The 7 gallon unit requires a specially wired circuit. You will also get a little bit of lukewarm water that was in the line between your main heater and the Bosch unit. Unless your main tank is awfully small and your bathtub massive, the 4 gallon unit should work for you. Maybe a demand type thankless heater in your bathtub hot water feed would be a better choice, but be careful to size it properly for your desired flow rate and temperature rise. Also a tankless is likely to require special wiring.
Question:	When this heater is connected to the hot water line, what happens with the cold water that was sitting in the pipes
Answer:	When the tap is opened, the hot water in the unit flows out. The colder water that was sitting upstream of the unit, enters the unit to be heated. If the tap remains open, the newly heated water flows out, being replaced eventually, (depending on the distance to the main water heater), with the water from the main water heater. You will probably set the unit temperature to equal the main water heater temperature, if you want to keep a constant temperature, but other scenarios are possible.

Product features

Bosch ThermoTechnology

The Bosch Tronic 3000 T point-of-use electric mini-tanks are available in three compact sizes, which can be wall-hung (bracket included) or floor-mounted. They fit easily under a sink, even in a cabinet space, and because they have a sleek and attractive design, they blend in seamlessly with existing decor when installed in a visible location. Simply tap into the cold water line and install the water heater directly at the sink to provide hot water. Great for a wide range of locations!

Water Where You Need It

Provides hot water quickly at point of use and comes with temperature /pressure relief valve installed - 2.5 and 4 gallon tanks feature a simple 120 VAc plug-in connection (1440 watts).

Quality for Long-Life

Thick CFC-free foam insulation for maximum energy efficiency, glass-lined tank for durability.

Great for Small Spaces

Water heaters are compact and lightweight and can be floor, shelf, or wall mounted (except 7 Gallon) - features a sleek and attractive design to blend seamlessly with decor.

Minimize Wait Time for Hot Water

Waiting for hot water at a sink located far from a primary heating source can be frustrating. Only having access to cold water from a sink is just not useful, and plumbing a hot water line to every sink in a home or business requires time and money. To get hot water where it’s needed, when it’s needed, a better solution is to use the Tronic 3000 T from Bosch: a point-of-use electric mini-tank heater. This heater can supplement a primary water heating source, or be used under a single sink. In fact, the Bosch Tronic 3000 T can be used for three different applications: as a sole water heating source for a single sink, as a supplement to an existing heater located far from the sink, and as a buffer installed in-line with tankless water heaters that experience intermittent cold water, also known as 'cold water sandwiching'. No matter the configuration, there’s minimal stand-by loss from this premium mini-tank water heater.

Product description

North America's Most Popular Portable Propane Heater! This patented radiant 4,000-9,000 BTU Liquid Propane heater connects directly to a 1 lb. cylinder and is the perfect solution for heating enclosed spaces like large tents up to 200 sq. ft. The expertly engineered size to BTU ratio is augmented with a fold down handle to give this heater maximum output while retaining a minimalistic footprint. A swivel regulator gives you the ability to adapt usage from a disposable cylinder to a remote gas supply with the purchase of a hose and filter. To light the unit, simply rotate the knob to pilot and push. Then the integrated Piezo sparking mechanism will take care of the rest. With the Oxygen Depletion Sensor (ODS) and accidental tip-over safety shut-off you can be sure that you will enjoy years of comfortable indoor safe heat.*WE ARE NOT ABLE TO SELL THIS PRODUCT TO CANADA AND MASSACHUSETTS* **Please note when operating the heater at altitudes over 7,000 FT above sea level the heater may shut off. Use- Emergency Heat, Tents, Campers, Workshops, Job Sites, Porches, Patios, Decks, Garages, Storage Buildings, Picnics, Tailgate Parties, Construction Trailers, Sporting Events, Barns, Sheds, Hunting Blinds, Shelters, Ice Fishing Shanties

• Steel, Plastic, Nickel
• Imported
• 4,000- to 9,000-BTU radiant heater for spaces up to 225 square feet. Approved for indoor/outdoor use; clean-burning; nearly 100-percent efficient
• When operating the heater at altitudes over 7,000 FT above sea level the heater may shut off.
• Auto shut-off if tipped over, if pilot light goes out, or if detects low oxygen levels. Fuel Consumption/Burn Rate (Gal/Hr) at 4000 BTU = 0.044 Gal/Hr, at 9000 BTU = 0.099 Gal/Hr
• Fold-down handle; swivel-out regulator; connects to propane tank (not included); Run Time (Hrs at Max BTU): 3 Hours
• THE USE OF UN-AUTHORIZED ACCESSORIES/ATTACHMENTS WITH THIS HEATER ARE EXPRESSLY PROHIBITED, MAY CAUSE SERIOUS INJURY, AND WILL VOID THE WARRANTY.

User questions & answers

Question:	Can I store the smaller, 1lb propane tanks on my terrace porch, possibly in a box, overall? in cold winters and hot summers
Answer:	For maximum safety, my recommendation is to store propane containers in a weather protected location, such as garage or shed with some natural ventilation. Propane is a highly flammable liquified petroleum gas that vaporizes and expands many-fold very quickly if released to atmospheric pressure, and will form a highly explosive mixture if released in a confined space without outside ventilation. If then ignited by a small spark such as a light switch, the resulting explosion may be catastrophic. There are on-line photos of boats that have exploded from propane leaks in the confined space of a boat cabin with catastrophic results including death of occupants. The cabin top and sides have literally been blown to pieces in such cases. New, sealed bottles of 1 lb size are reasonably safe, but once opened or partly used it is best to store away from occupied spaces. Although the probability is low, the consequences of failure are unacceptable. 20 lb propane containers should never be stored indoors. Play it extra safe and store propane bottles in a garage or outdoor shed. BJG (PE, ichemical engineer, inactive, retired)
Question:	can i hook a large propane tank to his
Answer:	Yes, any size propane tank can be a source for it when plumbed correctly. The simplest way to go is using the F273704 hose directly off most tanks. That hose needs nothing else and goes direct from the tank to the heater. This model heater only accepts high pressure gas thru the "disposable tank" connection, so other hoses with that connection can be used as well as the "filter" F273699. The "filter" is to take out oils coming from most rubbers in hoses where the high pressure "squeezes" the oil out, but the 704 hose is made "oil-free" to avoid that issue. FYI I tried running this off a regulated low pressure source, but with it on "high" the glow was like "low" setting normally (showing a lack of gas coming thru). So if you have a low pressure source, the "Big Buddy" models have a connection point for such thru a quick disconnect using hoses like F271802 or F271803, but not this model (this one needs high pressure gas to get enough thru it's disposable tank port).
Question:	How long with the heater run on low with a propane small cannister
Answer:	Best guess is 4-5 hours on low. I sat in a hunting blind for 2.5 hours and the 1lb propane canister was about half empty.
Question:	Does anyone know or understand how is it this type of propane heater can be used indoors without causing carbon dioxide poisoning
Answer:	As soon as the weather gets cold, I put my Big Buddy Heater on a stand & use a Mr. Heater 12' hose with regulator running to a 20lb. tank in living room. I use the hose with the low pressure regulator on it & hook it up to the quick connect fitting. I have 2 20lb tanks in mint condition, and rotate them as needed. This will be my 7th winter using it. Old windows & doors let air in and I have a carbon monoxide alarm near by. Also use a leak detector to check all connections after hooking up a full tank. If it's really cold, I'll start it on high for a short time, then run it on medium & it keeps living & dining room warm. Cuts my oil bill down greatly.

Product description

Please feel free to contact us directly to determine if this is the correct gas valve for your water heater!!! We will need the model and serial number of the water heater to cross reference properly. The electronic gas control valve incorporates an LED status indicator that monitors system operation and service diagnostics. Gas control located within hot water heater uses a thermopile to generate the power needed to operate the electronic gas control without requiring an external power source. This product has been certified by a third party to be compliant with the “Safe Drinking Water Act” requirements for low lead in potable (human consumption - drinking and cooking) and non-potable water applications (non-human consumption). Thermostat is compatible with all A.O. Smith branded heaters including A.O. Smith, State Water Heaters, American Water Heater, Whirlpool, Craftmaster and Reliance. Product manufactured by Honeywell for A.O. Smith. Honeywell model # WV8840B1158

• PLEASE PROVIDE MODEL AND SERIAL NUMBER OF YOUR WATER HEATER IF YOU NEED US TO DETERMINE CORRECT GAS VALVE PART NUMBER!
• Honeywell gas control valve is compatible with all A.O. Smith manufactured products including A.O. Smith, Reliance, State, American, Whirlpool and Craftmaster branded heaters
• Temperature control assembly 100262939 supplies the burner with gas to heat the water
• Temperature ratings: ambient-- 0 c to 60 c; tco limit-- 87 c
• A service technician is recommended for the repair to ensure the gas supply line is leak free

User questions & answers

Question:	will this replace a 97c37u 601 for state select water heater
Answer:	Yes
Question:	Will this replace wv8840b1042 from state select water heater model#gs650ybrt 300, serial# 1133a
Answer:	The gas valve you need for this heater is actually the other one we sell. It is a 100112336. Thank you!
Question:	will this replace model grn 50 200 serial #1146t
Answer:	No, this will not work. You need a 100093971. Good luck!
Question:	Will it replace wv8840b
Answer:	Contact Variety Home Supply, "PROVIDE MODEL AND SERIAL NUMBER OF YOUR WATER HEATER SO THEY CAN DETERMINE CORRECT GAS VALVE PART NUMBER!"

Product description

The HoldRite Water Heater QuickBelt is the reliable safety that every water heater requires. Transforming the plumbing industry through innovation. HoldRite: Converting Makeshift Methods into Engineered Solutions. The last three decades have seen HoldRite evolve from a single product family business to an international corporation and acknowledged industry leader. HoldRite has established a reputation as a leading manufacturer known for innovative products and services in such categories as pipe and equipment support systems, acoustical plumbing solutions, water heater accessories, and water and firestop sleeving systems.

From the Manufacturer

The Holdrite QuickStrap Water Heater Strap is the most tested and recognized water heater seismic/earthquake restraint available. The powder-coated steel strap supports water heaters up to 80 gallons and features the QuickLink system which allows for full adjustment from the front side of the water heater. The QuickStrap system includes: straps, J-clips, 3/8-Inch carriage bolts, caps and 3/8-Inch hex nuts. California Division State Architect (DSA) approval No.97-010. UPC/IPC/IAPMO listed. Item No.QS-50-D. For twenty-eight years, HOLDRITE has been the market leader in pipe support and alignment bracket systems. The focus of "Converting Makeshift Plumbing Methods into Engineered Solutions" has led to innovative industry product lines including HOLDRITE, Lockrite, Pexrite, Stout Bracket, Quick Strap, Quick Stand, and HydroFlame.

• PREPAREDNESS: Water heater earthquake/seismic restraint kit to secure your water heater in the event of seismic activity
• INCLUDES: Strap and required installation hardware
• CAPACITY: Supports up to 80 gallon water heater
• RATED: Compliant ith UPC/IAPMO and IPC requirements
• MADE IN USA: Designed, machined, and assembled in America

Product features

HoldRite QS-50-D Water Heater Strap Kit for Earthquake Restraint

The HoldRite QS-50-D Water Heater Straps are ideal for securing water heaters, water source heat pumps & remote chillers up to 80 gallons in size. This seismic/earthquake system includes: Straps (2 connect on top, 2 connect on bottom), J-clips, 3/8-Inch carriage bolts, caps and 3/8-Inch hex nuts. The Quick Link system allows for full adjustment from the front side of the heater. It can be used in residential or commercial projects. Compliant with UPC/IAPMO & IPC requirements.

Durable Galvanized Steel Construction

These heavy duty water heater straps from HoldRite secure water heaters up to 80 gallons and are compliant with UPC/IAPMO and IPC requirements. Two straps make top connection, and two straps make bottom connection. Designed, machined and assembled in the USA.

Quick & Easy Installation

This HoldRite QS-50-D QuickStrap water heater earthquake strap kit comes with all the necessary hardware for installation, including: straps, J-clips, 3/8-Inch carriage bolts, caps and 3/8-Inch hex nuts. They hold water heaters safely in place in the case of seismic/earthquake activity.

Trusted Reliability

Have peace of mind when doing residential or commercial home improvement projects with HoldRite's high-quality water heater straps, equipment and accessories. These HoldRite water heater straps are the right solution to secure water tanks with a solid, sturdy application.

Product description

FlowCo is a reliable non-thermostatic water heater delivering endless hot water on demand. FlowCo is ideal for single, sensor faucets or single, metering faucets for handwashing and other fixed-flow applications. The SPEX3512 has 3.5 kW and 120-Volt requirements.

• Temperature output based on flow rate
• SafeStart technology
• Mounts in any orientation
• Self diagnostics and intelligent controls
• Activates only on-demand, compact size

User questions & answers

Question:

Can I split line one to sink and one to dishwasher

Answer:

Hi Robert, This is the product Description, so I hope this will help. Thanks. DESCRIPTION: Xi3-55FW - Bow Mount Trolling Motor - Wireless Control - GPS - 55 lb-48"-12 V Locked, Loaded, and Ready to Stay on Fish. There are plenty of reasons to fish with the new Xi3. For starters, it has wireless control out of the box–so there’s no need for an expensive add-on. Right from the start you’ll be fishing from anywhere on the boat with the convenient hand-held remote. You’ll also get best-in-class quiet operation that’s up to 40% quieter than the leading competitor. With our Secure Step system, stowing and deploying the Xi3 is safe and easy. Releasing the motor from its locked position, and raising it to stow and go, takes just a single step on the release lever from a comfortable standing position.

Product description

The thermostatic mixing valve installed on top of new or existing water heaters to increase the available hot water in the water heater's tank, kill bacteria by increasing tank's temperature, while also preventing scalding by releasing water at a safe temperature. Transforming the plumbing industry through innovation. Cash Acme, a trusted history. An innovative future.

User questions & answers

Question:	Will this keep a constant output temperature (120) if my hot water heater varies from 120 to 140 to take advantage of time of use electric rates
Answer:	Any insulation is good for saving on your water heating bill. This is a relatively thin layer so it might be easier to install in a crawl space. Be extra careful not to rip the foil coating. It is thin and tears easily.
Question:	If I need a longer hose, can you just use any appliance hose with 3/4" fittings or is there something special about the hose proided
Answer:	Going by 3" thickness, the R value should be 10 - the same as the SP57 model.
Question:	What is the length of the flexible hose
Answer:	I cannot recall exactly how the one I ordered was packaged, and my hot water heater is right at 5’ and it covered it well. You will just need to open it (it could be folded) and if it is smaller than the stated dimensions, return it.
Question:	Will this help boost production on a tankless water heater
Answer:	The "blanket" is merely a thin section of insulation with mylar covering on one side. Cutting it is easy with scissors and will do no harm. The mylar is very thin and you must be careful not to puncture it. You may want to buy a roll of tape. The pieces that come with it don't go too far.

Product features

Tank Booster Pro - 3/4"

Tired of running out of hot water? Install the Cash Acme Tank Booster Pro on your existing water heater to double the amount of usable hot water from your plumbing system. The Tank Booster Pro is a cost effective solution for increasing usable hot water capacity. The tank booster mixing valve mixes both hot and cold water, which increases the tank's water capacity. Adding a Tank Booster allows water to be stored at a higher temperature, but safely delivered at 120°F (49°C) to all outlets.

Comfort

Increases the amount of usable hot water on existing water heaters. Remove suddenly cold showers from your daily routine with this easy add-on accessory.

Protection

Controls hot water to prevent injury from scalding when showering, bathing or washing by ensuring water is delivered at a safe temperature to all fixtures.

Safety

Reduces the risk of Legionella bacteria growth by enabling hot water to be stored at a germ-removing 140°F (60°C), while ensuring that water is delivered at a safe temperature to outlets.

Product description

The HoldRite Water Heater QuickBelt is the reliable safety that every water heater requires. Transforming the plumbing industry through innovation. HoldRite: Converting Makeshift Methods into Engineered Solutions. The last three decades have seen HoldRite evolve from a single product family business to an international corporation and acknowledged industry leader. HoldRite has established a reputation as a leading manufacturer known for innovative products and services in such categories as pipe and equipment support systems, acoustical plumbing solutions, water heater accessories, and water and firestop sleeving systems.

From the Manufacturer

The Holdrite QuickStrap Water Heater Strap is the most tested and recognized water heater seismic/earthquake restraint available. The galvanized steel strap supports water heaters up to 80 gallons and features the QuickLink system which allows for full adjustment from the front side of the water heater. The QuickStrap system includes: straps, J-clips, 3/8-Inch carriage bolts, and 3/8-Inch hex nuts. California Division State Architect (DSA) approval No.97-010. UPC/IPC/IAPMO listed. Item No.QS-50. For twenty-eight years, HOLDRITE has been the market leader in pipe support and alignment bracket systems. The focus of "Converting Makeshift Plumbing Methods into Engineered Solutions" has led to innovative industry product lines including HOLDRITE, Lockrite, Pexrite, Stout Bracket, Quick Strap, Quick Stand, and HydroFlame.

• PREPAREDNESS: Water heater earthquake/seismic restraint kit to secure your water heater in the event of seismic activity
• INCLUDES: Strap and required installation hardware
• CAPACITY: Supports up to 80 gallon water heater
• RATED: Compliant ith UPC/IAPMO and IPC requirements
• MADE IN USA: Designed, machined, and assembled in America

User questions & answers

Question:	Can you secure the straps into masonry with the bolts and screws provided
Answer:	It all depends on which omhs u are going to use there is 1200 watts at 2ohms 300×2AT 2 OHMS OR 600×2at 4 ohms
Question:	Can straps be used to strap a rain barrel? Is the strap length a total of 74" (2 of them) or 38" total
Answer:	The saltwater version is white. This black unit has pinpoint GPS, which some call virtual anchor. You push the button, and the trolling motor keeps your boat in that spot.
Question:	Do these come with two straps for the top and bottom or just one? Will I have to buy two
Answer:	55
Question:	Can I use the included installation kit to connect it to a stucco wall
Answer:	Yes if you install our Pinpoint GPS Gateway kit 8M0092085 and our NMea 2000 starter kit 8M0107522.

Product features

HoldRite QS-50 Water Heater Strap Kit for Earthquake Restraint

The HoldRite QS-50 Water Heater Straps are ideal for securing water heaters, water source heat pumps, fan coil units and remote chillers up to 80 gallons in size. This seismic/earthquake system includes: straps, lag bolts, j-clips, 3/8" carriage bolts and 3/8" hex nuts. The Quick Link system allows for full adjustment from the front side of the heater. It can be used in a wide variety of residential or commercial projects, and is compliant with UPC/IAPMO and IPC requirements.

Durable Galvanized Steel Construction

These heavy duty 38 inch x 1.5 inch galvanized steel water heater straps from HoldRite secure water heaters up to 80 gallons and are compliant with UPC/IAPMO and IPC requirements. Two straps make top connection, and two straps make bottom connection. Designed, machined and assembled in the USA.

Quick & Easy Installation

This HoldRite QS-50 QuickStrap water heater earthquake strap kit comes with all the necessary hardware for installation, including: straps, lag bolts, j-clips, 3/8" carriage bolts and 3/8" hex nuts. They hold water heaters safely in place in the case of seismic/earthquake activity.

Trusted Reliability

Have peace of mind when doing residential or commercial home improvement projects with HoldRite's high-quality water heater straps, equipment and accessories. These HoldRite water heater straps are the right solution to secure water tanks with a solid, sturdy application.

Product description

Please feel free to contact us directly to determine if this is the correct gas valve for your water heater!!! We will need the model and serial number of the water heater to cross reference properly. Installing the valve and then returning used is prohibited. The electronic gas control valve incorporates an LED status indicator that monitors system operation and service diagnostics. Gas control located within hot water heater uses a thermopile to generate the power needed to operate the electronic gas control without requiring an external power source. This product has been certified by a third party to be compliant with the “Safe Drinking Water Act” requirements for low lead in potable (human consumption - drinking and cooking) and non-potable water applications (non-human consumption). Thermostat is compatible with all A.O. Smith branded heaters including A.O. Smith, State Water Heaters, American Water Heater, and Reliance.

• PLEASE PROVIDE MODEL AND SERIAL NUMBER OF YOUR WATER HEATER IF YOU NEED US TO DETERMINE CORRECT GAS VALVE PART NUMBER!
• Honeywell gas control valve is compatible with all A.O. Smith manufactured products including A.O. Smith, Reliance, State, and American branded heaters
• Temperature control assembly 100112336 supplies the burner with gas to heat the water
• Temperature ratings: ambient-- 0 c to 60 c; tco limit-- 87 c
• A service technician is recommended for the repair to ensure the gas supply line is leak free

User questions & answers

Question:	Will this work with a state model gs650hbrt, serial # h07a
Answer:	Call state select. Customer service is excellent
Question:	Will this fit an ao Smith gcv 50 300 serial number 1134j
Answer:	Yes this is correct. Thanks for checking!
Question:	If I don’t install it can I return it
Answer:	Depends on where you get it, ask.
Question:	Is this compatible with my water heater model no gs 650yoct 300 and serial number 1331a030947? if no, which one is
Answer:	I have no idea. Contact the manufacturer of your heater or an authorized dealer.