14 best submersible heaters

• High Power: 1500W, 120V (MUST USE 15A OUTLET, THE HEATER IS 12.5A CURRENT)travel immersion water heater, High power for quickly heating, heats 5 gallons of water in few minutes, portable immersion heater will heat water continuously over 180 degrees F and towards boiling(It can't boil water).greatly saving your time. Note:people can't be in the water while the heater is working.
• Thermostat and Auto Shut off - The middle stainless steel tube contains a thermal overload safety switch, when water reaches a certain temperature(about 180-194 degrees F), immersion heater for water can automatically cycle on and off to maintain water temperature. It will not overheating and save power.Dry burning will auto shut off power to avoid catching fire.
• 304 Stainless-steel Guard - The heavy duty 304 stainless-steel guard on the electric bucket heater protects the heating element from directly contacting persons or animals. The holes on the guard help release heat into the water faster.
• Simple Operation - Immerse in water at proper level. Plug into any grounded wall outlet. Check power indicator light in plug to make sure the water bucket heater is on. then the portable water heater starts working. Warning: the cord and handle can't be submerged in water.
• UL-Listed against to the US safety standards, 12-month warranty. Package included: 1 pack bucket heater + Manual.

User questions & answers

Question:	How deep does the water need to be for it to work
Answer:	Hello, just make sure the water is always cover the stainless steel guard is OK, to avaid any dry burning, thanks.
Question:	How long would it take for two of these to heat up at 12ft Intex pool by about 5-10 degrees
Answer:	Assuming the surrounding air wouldn't cool the pool down (which is does), that your pool is full (assuming 2000 gallons) and the heater can run continuously. It would then take close to 3.5hours to heat 1 degree Fahrenheit.
Question:	Can this be used in a bathtub or a granite sink
Answer:	I dont see why not i use mine in a 20 gallon aluminum tub and it only takes 20 minutes to heat up
Question:	can I use it as the regular 110 vintage even it says 120 volts
Answer:	yes, it will work fine

Product features

GESAIL UL-Listed Bucket Water Heater - 1500W 120V

Why Choose Our Immersion Water Heater?

1. High power for quickly heating, greatly saving your time.

2. UL-listed for USA and Canada, complies with electrical safety standards.

3. Widely application, perfect for winter time job.

4. High quality stainless steel, anti-rust, durable.

5. Stainless steel guard to prevent scalding of hands.

6. Heavy-duty water resistant power cord, perfect for indoor and outdoor use.

Safe Enough to Touch Water When Plugged in

Unlike other products, our electric water heater allows you to put your hands into the liquid when the heater is plugged in, no worry about you will suffer from electric shock, UL-Listed makes it more professional and safer.

Warning:

Don't use extension cord. don't plug 2 heaters on the same outlet.

Make sure the water is always cover the stainless steel guard to avoid dry burning.

Product description

About 1300W 120V Titanium Fully Submersible Portable Electric Immersion Water Heater



This 1300W Titanium Fully Submersible Portable Electric Immersion Water Heater called a Pong-Dang Heater is a high end immersion water heater designed to provide customers with a long-lived, dependable, and trouble-free heater for the heating of water, salt water, underground water, solutions, etc. and can be completely submerged in a liquid.

Should excessive the liquid temperature occur, the auto-overheat safety cutoff will automatically turn off the power to prevent the liquid from overheating.

The Fully Submersible Portable Electric Immersion Water Heater can be used in a wide range of different fields and any places requiring hot liquids and applications where freeze protection or temperature maintenance is required.



[Features]

Built-in Thermostat : you can choose the temperature you want your liquid to be, and the heater will reach and maintain it with no more work on your end.

The heater will automatically turn off when it reaches your desired temperature, and turn back on when it senses that the liquid has cooled off.



[How to Use]

Put the heating element completely submerged in the liquid

The heater works best when installed in the horizontal position.

Can be used in many different types of buckets or containers regardless of the shape of the buckets or containers.



[Application Selections]

Titanium Heater : Fresh Water, Tap Water, Salt Water, Underground Water, Solutions, etc.



[Cautions on use ]

It must always be fully submersed in the liquid when in use.

If the heater is exposed to the open air or runs out of water while power on, all heating elements become very hot in a few seconds resulting in the heating element burns out and damages beyond repair.

• Fully submersible in fresh water, salt water, solutions
• Built in thermostat up to more than the boiling point of water
• Auto Shut-Off to prevent the liquid from overheating
• High degree of efficiency as the heat is quickly dissipated directly into the liquid
• Easy and to use, excellent durability and outstanding performance

User questions & answers

Question:	I have a 200 gallon tank will this work? An how long to reach 80f
Answer:	Unfortunately there is not a 4-inch clearing. The bowls hang low so there is only roughly a 2.5 inch clearance. However, the legs sit exactly 15 inches apart. Hope this helps.
Question:	Is the components of this device food grade? Could it be used for homebrewing
Answer:	Yes...please contact our customer service department at www.messymutts.ca and/or [email protected] to make arrangements. Thanks.
Question:	How many amps does the heater use
Answer:	The legs and feeder are a hard molded plastic. I think it would be tough to get all the legs cut evenly so you don’t have wobble.
Question:	Hey, i need to heat 10 liters of water with high ph to 60 c for 90 day on row. does this heat work for this task? thanks
Answer:	That may work for food but not water. Plus it is kind of wobbly. I would say - not a good idea. We used the 3" for the puppy and 5" for adult. Very pleased with the product. We have been using for 3 years.

Product description

Product Features:

1. 110V-120V/60HZ 6-foot power cord,

2. Fully submersible.

3. Universal heater for marine, freshwater or tropical aquariums

4.automatic safety shut-off feature, and overheating protection.



Available In:

Length - 9" 15-30 Gallons, 100 Watts

Length - 9.5" 30-50 Gallons, 150 Watts

Length - 11" 40-60 Gallons, 200 Watts

Length - 11" 50-80 Gallons, 300 Watts



Submersible Aquarium Heaters are made from thermal shatter-resistant quartz glass and were designed to absorb impacts, making them extremely durable.

A power indicator light turns on when the unit is heating, Can be positioned at a vertical or horizontal angle. Can be used in fresh or saltwater fish tanks. 6-Foot power cord.

• ★300W aquarium heater is suitable for 50 to 80 gallons aquariums,Length - 11 inch,voltage 110-120V, power cord is 6ft, please choose the right wattage aquarium heater according to our size chart.
• ★It shows an area to adjust the temperature. It's not exactly accurate but it turns easy and can be adjusted at small intervals.
• ★Explosion Proof: 2mm thickened quartz glass,can be used in fresh water and salt water aquariums,easy to hide in the tank.
• ★Precise temperature dial from 68 to 89°F allows for complete control of aquatic climate within a 1-degree difference.
• ★Adjustable Aquarium Fish Tank Water Heater Sensitive and reliable thermostat maintains uniform temperature. Automatic shut off when the temperature is reached

User questions & answers

Question:	Can the thermometer be mounted inside the tank. Somewhere here said yes but an example I saw had it mounted outside the glass. Which is correct
Answer:	The small pointy end mounts in the tank and then the temperature reading display mounts on the outside they are connected.
Question:	I set the temperature 77 but it heats 83.4 what should I do
Answer:	Send it back it must not be working correctly because if you set it add 77 it should stay there
Question:	Is this heater UL listed
Answer:	Yes the 150W heater
Question:	Digital Thermometer supplied with this heater is almost 3°F off. Is there a way to calibrate it
Answer:	I would not know how to calibrate it, but just monitor the tank temp. I do not look at the temp on the heater, just the tank water and this heater holds it very constant.

• ★ Temperature range: 59°F~94°F, display Fahrenheit °F, this heater is designed for1~10 gallons tank.
• ★ Automatic constant temperature function, when water temperature reaches to specified temperature value, heater will automatically stop heating, when water temperature is lower than the set temperature, heater will automatically start heating.
• ★ Touch button, cyclic adjust temperature , easy to use and Safety.
• ★【Note】:this heater is 100% submersible use only, during its heating time, heater must be 100% submerged into the water.
• ★【SATISFACTION GUARANTEED】Gain the confidence to go hard with us! Our Aquarium Heater is built with durability in mind and safety for every design, In the remote possibility that you’re not satisfied with our product, just contact us, and we will gladly give you a new Aquarium Heater replacement. 12 Month Warranty and 24 Hour Professional After-sales Service.

User questions & answers

Question:	The heater is displaying EE what does that means? It came without any instructions
Answer:	They don’t have a physical store.
Question:	What type of plastic is it made of
Answer:	Not an issue we would be happy to fulfill this request. Please email us at [email protected] after placing the order letting us know your request!
Question:	Can i adjust it to set to 78 degrees F for a betta fish
Answer:	I believe the traditional answer is one inch of fish per gallon of water, so, it depends on how big these are.
Question:	No directions came with my heater....How can I adjust the temp so that it actually sticks
Answer:	A 10-15 gallon tank would be smallest we would recommend.

Product features

The Greatest Advantage

Multi-function LED digital display heater: Use advanced IC technology,

Oval appearance, large LED display.

Clearly and accurately displays the water temperature,

highlights your aquarium.

No need to buy another thermometer.

The Most Safety Operation

How to adjust temperature:

There is a regulator connect with power cord, just press the button after heater has been installed,

and you can will see the LED display shows °F，

press the button until you see the display shows your expecting temperature (display 59~93℉ in cycle by),

and then leave it for heating up.

For example:

Expecting temperature is : 80℉ Heater display shows: 70℉ Then, Press the regulator 10 times,

then you will see the display shows from 70 to 80°F.

When you see the display shows 80°F，

then leave it for heating.

Advanced Waterproof

Highest waterproof level: IPX8

Built-in Temperature Control Chip

Built-in temperature control chip

External Touch Button

External Touch button, cyclic adjust temperature , easy to use and Safety.

Small Size

Heater Ideal for 1-10 gal fish tanks. Heater Size: 2.5 x 1.5 x3.5 inch

Product description

Designed to heat 5 gallons of water up to approximately 110 degrees. Thermostatically controlled to regulate the water temperature between 100 and 110 degrees. The low profile design rests easily in the bottom of any bucket or container. Constructed of cast aluminum for durability and reliability. 6-foot cord. UL approved, made in USA. Heavy duty "anti-chew" cord protector

• Designed to heat 5 gallons of water quickly and efficiently
• Thermostatically controlled to maintain water temp approximately 100°-110°F (38-43°C)
• Low profile design rests easily in the bottom of any bucket or container
• Constructed of cast aluminum for durability and reliability
• UL listed with 6' power cord

User questions & answers

Question:	can i put bleach/chlorine in the water when this heater is in use
Answer:	Probably only for a covered patio or porch.
Question:	Is this supposed to shock me when I touch the water? Using a volt meter it shows 30 volts when i touch the water with one lead and the ground with the
Answer:	I dont think the base comes off but the light folds down so you can ship it.
Question:	Would i be able to run this from a stator that produces 1000 amps from a wind mill
Answer:	si
Question:	In theory, could I heat a small swimming pool, about 700 gallons, with this product. What would the electric costs be
Answer:	It will not light up when plugged in. You can turn it off with a smart plug but you would have to touch it to turn it back on after the smart plug is activated.

Product features

Farm Innovators W-409 1000W Submergible Bucket Heater with Attached Guard

Designed to heat 5 gallons of water up to approximately 110 degrees. Thermostatically controlled to regulate the water temperature between 100 and 110 degrees. The low profile design rests easily in the bottom of any bucket or container. Constructed of cast aluminum for durability and reliability. 6-foot cord. UL approved, made in USA. Heavy duty "anti-chew" cord protector.

• High Power: 1500W, 120V bucket water heater(MUST USE 15A OUTLET, THIS HEATER IS 12.5A CURRENT), use for water only, heats 5 gallons of water in few minutes, portable immersion heater will heat water to boiling when you plug in, just make sure the water is always full cover the water immersion heater. the package comes with a digital LCD thermometer as gift.
• Rust Proof Stainless-steel Guard - The heavy duty 304 stainless-steel guard on the electric bucket heater protects the heating element from directly contacting persons or animals. it is rust proof and durable, design for long term use. The holes on the guard dissipates heat into the water faster.
• Simple Operation: Place immersion heater for water in a container designed to contain boiling water, fill the container with water to full cover the submersible bucket heater shield(including stainless-steel guard and plastic part), plug portable water heater into a properly grounded 120V AC outlet, make sure the portable immersion heater is on, Feel the difference in a few minutes!
• Widely Application: The bucket heater immersion can be used in different size container like bucket, basin, bath tub, mini inflatable swimming pool, etc.please make sure the container design to hold boiling water, or unplug it before boiling.perfect for winter time job such as car washing, heat your farm animals’ water, your tiling water on the job site ect.
• Warranty: Full one year warranty against defects, please contact us if have any problems, we will solve it at the first time. Package included: 1 pack bucket heater + 1 digital thermometer + Manual.

User questions & answers

Question:	Good for in the bedroom, if you know what i mean
Answer:	This diner stands 8.5" high. You would want to measure from the floor to the top of your dog's head, your dog should be approx. 20" tall to comfortably eat from this size diner.
Question:	What's the lowest temperature
Answer:	I would not order this unless you have a small toy size dog the bowls are missmarked on the sets. I ordered (I have 2 labs ) and I ordered the large size and the bowls were too small. Amazon gave mr refund but this is false advertizing from the company
Question:	Can this be plugged into a car inverter for the power
Answer:	I'm not sure any more. We had to get rid of these, the paint started not just chipping, but peeling off in a matter of a couple months. We did not put them in the dishwasher, only had washed them. We did not want our Greyhound getting this in his system, so the bowls were pitched.
Question:	How long is the electrical cord? NEC requires min. of 6 ft between the water source and a power plug
Answer:	The Large Modern Double Diner is: 19 inches (length), 8 inches (width)m and 11.75 inches (height). The Large SwitchIN Bowls are: 6 inches (base width), 9.22 inches (top width) and 3.15 inches (height).

Product features

GESAIL 1500W 120V Full Immersion Water Heater. 4 Colors for Your Choice.

We are professional heater manufacturer, focusing on water heaters and other electric heating products, such as Birdbath Deicer Heater, Outdoor Heated Birdbath ect. Our goal is to provide high-quality and cost-effective products directly to consumers.

Rust Proof 304 Stainless Steel Guard

Our immersion heater uses high-quality 304 stainless steel guard and fireproof fiber material plastic, can be used for a long time without rust, Fireproof materials also ensure the safety.

4 Tubes Heating Element

Unlike other products, our heating element is much longer than others, it means the surface load of the tube is relatively smaller, the result is very durable, design for long term use. And make heating more efficient.

Security Protector Case

There are nails to fix the stainless steel and fireproof plastic to avoid the protective shell falling off. The guard aims to keep you away from directly contact the heating elements, which adds the max protection to prevent accident injures.

US Standard Ground Plug, No Electric Shock

Compare with other thin 2-wire not standard products on the market, our immersion heater for water adopts US standard thick 3-wire ground plug, safe enough to touch water when plug in and without electric shock.

Warning:1500W/120V=12.5Amps, please use 15A outlet at least, if you use more than one heater, please use the socket separately.

Very Easy to Use

No any driver is required, just full immerse the water bucket heater in the water and plug into a 120V power socket, then the heater can automatically start heating, easy to use without complex steps. Come with a digital LCD thermometer, easy to measure water temperature, just unplug when reach the water temperature you need

Widely Application

Whether you are going to have a comfortable hot shower or enjoy a water-game party with your friends, or use it to heat water in the winter to wash your pet or your car, our portable immersion heater can do the good job, perfect for winter time job, make your life more convenient.

• ★【50 Watt Heater】: This Aquarium heater is suitable for 5 to 15 gallons aquariums, Length - 6.8 inch,voltage 110-120V, power cord is 4.0 ft, please choose the right wattage aquarium heater according to our size chart.
• ★【Temperature range】: 63°F~95°F , It is very easy to adjust the temperature you need, we also deliberately give each customer a free diving thermometer, you can observe the water temperature of the fish tank at any time.
• ★【Intelligent temperature control】：Automatic constant temperature function, when water temperature reaches to specified temperature value, heater will automatically stop heating, when water temperature is lower than the set temperature, heater will automatically start heating. Furthermore, Automatic safety shut-off feature, and overheating protection.
• ★【Note】: 1. Aquarium heater is 100% submersible use only, during its heating time, heater must be 100% submerged into the water.,Please unplug the power supply when cleaning the fish tank or aquarium water changes. 2. Heater rod is suitable for people over 16 years of age. Children or minors should be under adult guidance or supervision.
• ★【SATISFACTION GUARANTEED】: Gain the confidence to go hard with us! Our Aquarium Heater is built with durability in mind and safety for every design, In the remote possibility that you’re not satisfied with our product, just contact us, and we will gladly give you a new Aquarium Heater replacement. 12 Month Warranty and 24 Hour Professional After-sales Service.

User questions & answers

Question:	Can I use a short extension cord with this 25 watt heater because the port is so short
Answer:	About 2 in wide and 12 in long
Question:	Does this heater come with suction cups
Answer:	Not sure. Would have to make sure it does not rest on plastic liner. Heats water to very high temps. I have to keep unplugging it while heating hot tub. Goes well over 110 degrees. Too hot for fish.
Question:	Are their any directions to put the heater in
Answer:	I use mine to heat my 300 gallon stock tank pool. I use a filter with chlorine bleach. The heater works beautifully. When I take it out before we get in the pool, I wipe it down with a small towel. White residue will form but it comes off easily. I used it daily last summer August through September. Just set up the pool again yesterday and it’s working fine.
Question:	Has anyone else experienced condensation in the display? it makes it very hard to read. does anyone know how i can stop this from happening
Answer:	Mine doesn't. I have touched the water while the heater still connects and nothing happened.

Product features

FREESEA Aquarium Submersible Heater

1.Temperature range: 63°F~95°F , It is very easy to adjust the temperature you need.

2.Automatic constant temperature function, when water temperature reaches to specified temperature value, heater will automatically stop heating, when water temperature is lower than the set temperature, heater will automatically start heating.

100% is submersible heater, and it should be installed on the inner side of fish tank.

100% is submersible heater, and it should be installed on the bottom of fish tank.

The water level of fish tank cannot very low, as it is easy for heater to exposed on water.

It is forbid for exposing some main body part of heater on water when using.

Product description

Color：Black



(✺ω✺)4 Tubes Heating Element

Unlike other products, our heating element is much longer than others, it means the surface load of the tube is relatively smaller, the result is very durable, design for long term use. And make heating more efficient.



(✺ω✺)Security Protector Case

There are nails to fix the stainless steel and fireproof plastic to avoid the protective shell falling off. The guard aims to keep you away from directly contact the heating elements, which adds the max protection to prevent accident injures.



(✺ω✺)Rust Proof 304 Stainless Steel Guard

Our immersion heater uses high-quality 304 stainless steel guard and fireproof fiber material plastic, can be used for a long time without rust, Fireproof materials also ensure the safety.



(✺ω✺)US Standard Ground Plug, No Electric Shock

Compare with other thin 2-wire not standard products on the market, our immersion heater for water adopts US standard thick 3-wire ground plug, safe enough to touch water when plug in and without electric shock.



(✺ω✺)Warning:

1500W/120V=12.5Amps, please use 15A outlet at least, if you use more than one heater, please use the socket separately.



(✺ω✺)Widely Application

Whether you are going to have a comfortable hot shower or enjoy a water-game party with your friends, or use it to heat water in the winter to wash your pet or your car, our portable immersion heater can do the good job, perfect for winter time job, make your life more convenient.

• 304 Stainless-steel Guard
• Made in USA or Imported
• ❶Good Quality Portable Water Heater : Ding Ding immersion water heater runs with energy-saving .Imersion heater boils 5 gallon water in minutes . All you need to do is just put bucket heater in to the water and plug the pool warmer, easy to use.☘
• ❷304 Stainless-steel Guard - The heavy duty 304 stainless-steel guard on the electric bucket heater protects the heating element from directly contacting persons or animals. The holes on the guard of submersible water heater help release heat into the water faster.☘
• ❸Easy to Use：Place camping water heater into water designed to contain boiling water, fill the container with water to full cover the submersible bucket heater , plug portable water heater into a properly grounded 120V AC outlet, make sure the portable immersion heater is on, make the pool warmer in a few minutes!☘
• ❹Very Wide Use:The electric immersion heater can be used in water,pool heaters for above ground pools fit for bucket, basin, bath tub, mini inflatable swimming pool, etc.This immersion heater is handy and super lightweight, making it pool warmer any grounded wall outlet. Then the 1500 immersion heater can start working.☘
• ❺Warning :The camping water heater needs to be completely immersed in water ,Please do not plug the two camping water heater into the same outlet to avoid fire hazards. Please take out the immersion water heater before touching the water!☘

• 【Small Size Heater】 AUOMII 50W small size aquarium heater is suitable for 1~10 gallon mini fish tanks, and easy to hide in the tank. Temperature can be accurately adjusted from 64~93°F. This heater suitable for both saltwater and freshwater. The rated voltage is 100-130V. Easy to set temperature, Easy to read temperature, Easy to install
• 【Intelligent Frequency Conversion Technology】Temperature accuracy is up to 1℉ as advanced Intelligent Frequency Conversion Technology. If the temperature is lower than the target value of 0.2°F, the heater works at a variable frequency to keep the temperature constant. The working frequency will be changed according to temperature variation. If the water temperature is lower than the target temperature of 1°F , the heater will work at full power. The temperature curve is almost a line
• 【Safety and Reliable】3 pin plug with ground wire, connect the water to ground directly, no risk of electric shock. 4 protections: Leakage protection / Over heating protection / Dry running protection / Out of water protection. Sturdy engineering plastic shield, scalding resistant and explosion resistant. Using touch control button, easy to set and read the temperature. 3 Strong suction cups, easy to install
• 【Built-in Thermometer】Water temperature will be displayed on both the heater and external temperature controller in real time. Dual built-in temperature sensor. Dual LED display. High accuracy temperature as the temperature sensor is contact with water directly and have excellent heat conduction
• 【30days refund 12 months replacement】Your purchase today is completely RISK-FREE. If you are not completely satisfied for our device, let us know for a full refund. Why wait? Get it today

User questions & answers

Question:	The temp reading keeps fluctuation from 79.1 to 80.1up &down by tenths/degree. water temp stays constant. does it do this all the time
Answer:	My experience has been that it DOES fluctuate slightly but not enough to make a difference in the water temperature to be harmful to the fish
Question:	Wonder if this would keep a 7 gal chichen water bucket from freezing
Answer:	If you're bucket is suspended and the cord follows the line holding the bucket then the chickens leave the cord alone. I've been using it this way for 2 months; works great. I use the spring action drinking cups attached and cover them ever m every night with thermal coverings to keep the cup from freezing. I made the coverings from cut up cooler bags.
Question:	Can this heater be hidden under the substrate
Answer:	Dears, I think yes. It is smallest one in market. please try.
Question:	What happens when there is a power failure ? Will the unit remember the settings, or will it zero itself
Answer:	the device will remember the setting. Please contact seller for technical support. you can also replace a new kit.

Product features

CAUTIONS:

1, This device must be used under rated voltage 100-130V. The device don't support universal voltage.

2, The heater must be fully submersed into the water. The external temperature controller must be kept away from the water as it is not waterproof.

3, Please read the user manual in package carefully before using. DO NOT plug heater into an electrical outlet until it is placed inside the aquarium.

Intelligent Frequency Conversion Technology

• The working process is not " Water cooling" --> "Start heating" --> "Reach setting temperature" --> "Stop heating".
• The special point for this heater is that the working process is based on "Intelligent Frequency Conversion Technology". The heater's working frequency will be changed according to temperature variation.
• Thanks for PID algorithms, if the temperature is lower than the target value of 0.2°F, the heater works at a variable frequency to keep the temperature constant. Green indicator light on. If the water temperature is lower than the target temperature of 1°F , the heater will work at full power. RED indicator light on.
• The water temperature curve is almost a line.
• However, please choose the right heater power according the aquarium volume. 50W for 1~10 gallon, and 100W for 20 gallon

Easy to install, Mini size

• Small size: 2.9 X 2.7 X 1.2 in
• Perfect for mini aquarium tank, easy to hide in tank
• 3 Strong suction cups, easy to install

Easy to set temperature

• Press and hold the button in external controller for more than 3 seconds to unlock the key
• Short-press the button once, the temperature number will increase 1℉. Keep short-pressing the button until the target temperature is reached. It is a cyclic adjustment

Easy to read temperature

• Built-in thermometer
• Dual built-in temperature sensor, The temperature is measured more accurately
• Dual LED display. The water temperature will be displayed on both the heater and the external temperature controller in real time

High accuracy up to 1℉

• Thanks to advanced Intelligent Frequency Conversion Technology, the temperature accuracy is up to 1℉.

Safety, Electric Leakage protection

• The water will be directly connected to the GROUND through the ground pin in the power plug. No electrical shock
• Overheating protection / Dry running protection / Out of water protection

3 color indicator, 3 Error codes

• 3 color indicator, 3 Error codes.
• RED: Heating / GREEN: No heating / YELLOW: fault.
• E1: Out of water / H1: Over heating / H2: Dry running.

Applicable for freshwater, saltwater and marine aquariums, aquaculture, glass containers, and hydroponic systems

• 【1800W IMMERSION HEATER】This high power immersion water heater, heat 5 gallons of water in minutes, the more water you heat, the longer it lasts.
• 【PREMIUM MATERIAL】This immersion heater is made of stainless steel material, the tube uses magnesium oxide as the heat-conducting material, which is durable and anti-oxidation.Better heat resistance and higher safety compared to other common heating tube.
• 【SPIRAL DESIGN FOR EFFICIENT HEATING】Spiral immersive design provides a uniform heat and fast thermal conductivity, improving the heating efficiency. After 20 seconds of non-use, it will automatically and safely dissipate heat. This immersion water heater for bathtub includes LCD digital thermometer, sandpaper and wire ball, easy to test the water temperature and clear the scale.
• 【EASY TO USE】You just need to put the immersion heater in the bucket, basin, small bathtub or portable pool completely and plug in the 120v/110v plug. Please note the heater must be immersed in water completely during use. Attached is a LCD digital thermometer that the metal probe of the thermometer is put into the water, you can know the water temperature. Note: It is recommended that the continuous use should not exceed 3 hours at a time.
• 【SAFETY AND WIDELY APPLICATION】This stylish immersion heater is suitable for buckets, basins, small bathtubs, inflatable swimming pools and other containers, plz do not heat in metal containers. It is the first choice for home, farms and outdoor job. Note: Please do not plug two heaters on the same outlet, because the voltage at home cannot withstand such high power.

User questions & answers

Question:	What is the highest temperature it will heat water up to
Answer:	Dear customer, the diameter of the base is around 8.66-inch, and the diameter of the top piece is about 9.96-inch. BoostArea provides a 1-year warranty for all products, you can extend the extra 3-month warranty by visiting【boostarea.afterservice.vip】. If you have any inquiries, please feel free to contact us via our support email or support tel, we are always here for helping you!
Question:	If using in a tub or pool, is it safe to use this while in the tub or do you need to step out
Answer:	Dear customer, thank you for your inquiry. For the dim function, you can refer to the guide video on the product page (The time from 53s to 1:06), here is the link: https://www.amazon.com/vdp/112997b9c5d94c408395ad902ed19811?ref=dp_vse_ibvc0 Here are the detailed operations: First, Short press the touch switch, you can turn the floor lamp on or off; After the lamp is on, continue to LONG press on the touch switch, then the floor lamp will dim from 5% to 100% brightness (the time from 5% to 100% is around 5s) If you wanna a lower brightness, you just need to Long Press on the touch switch again to adjust the brightness. Hope this answer is helpful to you! We really hope you will enjoy the floor lamp! BoostArea provides a 1-year warranty for the standing lamp, you can extend the extra 12-MONTH WARRANTY by visiting【boostarea.afterservice.vip】 If you have any inquiries, please feel free to contact us via our support email or the support tel, we are always here for helping you! 📧Email: [email protected] ☎️Tel: +1 833 322 0190 (Tel support hours: EST 09:00-17:00 / PDT 06:00-14:00, from Monday-Friday)
Question:	Will this heat a small kids pool of 600 gallons
Answer:	Dear customer, BoostArea provides a 1-year warranty for the dimmable floor lamp, you can extend the extra 12-MONTH WARRANTY by visiting【boostarea.afterservice.vip】We really hope you will enjoy this floor lamp! If you have any inquiries about the standing lamp, please feel free to contact us via our support email or support tel, we are always here for helping you! 📧Email: [email protected] ☎️Tel: +1 833 322 0190 (Tel support hours: EST 09:00-17:00 / PDT 06:00-14:00, from Monday-Friday)
Question:	How hot will the water get
Answer:	Dear customer, thank you for your inquiry. This 70 in tall floor lamp adopts sturdy metal material from the base to head, which ensures great stability. We really hope you will enjoy this floor lamp! BoostArea provides a 1-year warranty for the standing lamp, you can extend the extra 12-MONTH WARRANTY by visiting【boostarea.afterservice.vip】 If you have any inquiries, please feel free to contact us via our support email or the support tel, we are always here for helping you! 📧Email: [email protected] ☎️Tel: +1 833 322 0190 (Tel support hours: EST 09:00-17:00 / PDT 06:00-14:00, from Monday-Friday)

Product features

Summary

Are you looking for a safe and fast-heating immersion heater? If yes, this heater might best be choice. The immersion water heater can heat water in minutes. It can be used in portable pools, buildings, animal husbandry, car washing, indoor use and many other uses in cold weather!

Specification:

Voltage: 120 /110 Volts

Cord Length:1.8M/5.9 FT

Package Included: 1 x water heater + 1 x thermometer + 1 x sandpaper +1 x wire ball

Product description

🐳The best material protects you and your aquatic life:

①Quartz heating rod: high temperature resistance, corrosion resistance, good thermal stability, and good light transmission performance.

②PPS hard plastic: has excellent high temperature resistance, corrosion resistance, radiation resistance, flame retardant, balanced physical and mechanical properties, excellent dimensional stability and excellent electrical properties.

③Nickel-chromium wire: high strength at high temperature. After long-term use, it will be cooled down. The material will not become brittle. Fully oxidized nickel-chromium alloy has a higher emissivity than iron-chromium aluminum alloy. It is non-magnetic. In addition to sulfur atmosphere, Good corrosion resistance.

🐳How to use the temp setting?

Press the button on the controller over and over, the set temp digits will go circularly from 62℉ to 93℉, when you set it to the digit you want, stop and wait the led flashing for 4 times, then the setting is done and the led will go on displaying the water temp.

🐳How to switch between Fahrenheit and Celsius？

You only need to press and hold the temperature adjustment button on the LED thermostat to easily convert between Fahrenheit and Celsius. The facility temperature can be adjusted from 17-34 degrees Celsius, and the Fahrenheit temperature can be adjusted from 62-93 degrees Fahrenheit. The operation is very simple！

🐳Attention in use:

Before the aquarium heater is turned on, you need to completely submerge the heating rod in the water. The attached two super powerful suction cups can be firmly fixed on the side of the aquarium or at the bottom of the aquarium.

🐳After-sales service:

LUYS has a strong after-sales service team, if you have any questions or suggestions, please feel free to contact us!

• 🐠【Intelligent Water Sensor and Over Temperature Protection】This aquarium heater has a unique intelligent temperature and water sensor system, the heater will automatically stop heating when the heater is completely out of water or it rapidly heats beyond the set temperature, the indicator light will turn green in both cases to ensure the maximum safety of you and your aquatic organisms just like protecting our own safety.
• 🐠【Explosion-proof Quartz Material】The aquarium heater is made of high-quality quartz glass tube, it's very durable and explosion-proof, this fish tank heater can be used for saltwater and freshwater aquariums, which is pretty shatter-proof and blast-proof and prevents electricity leakage. And the stronger black protective container is scald-preventing for your aquatic organisms and your safety.
• 🐠【Rapid Heating System】The voltage of this aquarium heater is 100-120V/50-60HZ, power 300W, Universal two-pin plug, heater rod length 12.99 inch, 300W submersible heater for fish tank 26-66 gallon, Temp range: 62-93℉. The heating tube can conduct heat quickly and fully contact with water to achieve rapid heating effect.
• 🐠【Digital LED Display Controller】the external IC temp controller of the fish tank heater can show the water temp with 2 red LED digits. The temperature in Fahrenheit and Celsius is displayed, which can be switched by pressing and holding the button for a few seconds. To set the temp, just press the button over and over until the screen displaying the temp you desired, the setting is done and the led shows the current water temp again.
• 🐠【Wide Range of Use】This aquarium heater is suitable for many occasions. The fish market is a common place for us. It can maintain the freshness of fish. They are also suitable for places where aquatic life such as fish tanks, aquariums, and small fish ponds are kept. There are strong suction cups on the heater guard and the thermometer, it's easy to install the aquarium heater no to the tank walls or bottom, please keep them fully submerged.

User questions & answers

Question:	Can this heater be position horizontally
Answer:	Good day! Yes, it has two suction cups, you can place it horizontally at the bottom of the fish tank, hope this will help you!
Question:	I have a 60-gallon fish tank. should i choose a 300w or 500w heater
Answer:	A 60 gallon tank only requires at the most 300 watts
Question:	It can be use in a 120 pond outdoor
Answer:	Their specs say it can be used in a 120 gallon pond. I'd say it would depend on the circulation and how insulated the pond is. Also, the electronics would need to be in a weatherproof housing.
Question:	What happens if the power goes out and comes back on? Does it reset to 82F
Answer:	I read the instructions and features again and it does not mention anything about the temp we set being memorized. It just says it saves the temp when its set and that if the water reaches above 94 degrees it automatically goes back to 82. So I would say yes it goes back to 82 degrees. Which isnt too bad for my turtles but not sure about fish if someone isnt home to reset it again. Hope this helps.

Product description

2000W, 120v/110v, Immersion Heater let your water heat up in just a few minutes. Equipped with a Fahrenheit water temperature gauge, let the water temperature reach the temperature you want to end the work of the heaterat any time.



Protective Cover

A 304 stainless steelprotective cover is provided on the outside of our heating rod to prevent burnsand increase the life of the heating tube.



Easy to Use

No any driver is required, just full immerse the water bucket heater in the water and plug into a 120V power socket, then the heater can automatically start heating, easy to use without complex steps. Come with a digital thermometer, easy to measure water temperature, just unplug when reach the water temperature you need.



Why Choose Our Immersion Water Heater?

1. High power for quickly heating, greatly saving your time.

2. Complies with electrical safety standards.

3. Widely application, perfect for winter time job.

4. High quality stainless steel, anti-rust, durable.

5. Stainless steel guard to prevent scalding of hands.

6. Water resistant power cord, perfect for indoor and outdoor use.



Package included:

1 × pack bucket heater

1 × digital thermometer

1 × Manual

1 × steel wool

1 × sand paper



Note:

1. Don't use extension cord. don't plug 2 heaters on the same outlet.

2. Be sure to put the temperature sensor and the heating tube in the water before turning on the power, otherwise the heating tube will be damaged immediately!

• 【Fast Heating】2000W of power can make 5 gallons of water warm in a few minutes. Before inserting the heater, please make sure that the heater is completely immersed in the water then connect the 120v/110v power supply.
• 【Premium and Safe】With high quality stainless-steel protect cover,submersible water heater will effectively prevent the heating element is in direct contact with people or animals and heat dissipates to the water faster by flowing through the holes in the guard.Durable and reusable.The holes on the guard dissipates heat into the water faster.
• 【Simple Operation】Immerse in water at an appropriate water level and plug into any grounded wall outlet. Then the 2000 immersion heater can start working. Package included: 1 pack bucket heater + 1 digital thermometer + Manual + steel wool + sand paper.
• 【Widely Used】Our portable water heater is suitable for portable bathtub, pool heater, pond heater, water trough heater, bucket heater. Especially fit for heating water in large size container like bucket, basin, bath tub, mini inflatable swimming pool, etc.
• 【Safety Tip】1.Make sure completely immersed in water in working condition. 2.Do not use it for more than 3 hours continuously! 3.Please do not plug the two heaters into the same outlet to avoid fire hazards. 4.Please take out the heater before touching the water!

Product description

Specification:

Wattage: 1500W

Voltage: 120V

Dimensions: 7.09 x 2.36 x 2.36 inches

Weight: 1.1 pounds

Color: Rose

 

Wide Applications

The immersion heater is suitable for buckets, basins, small bathtubs, and other containers. It is the first choice for home, farms and outdoor job.

 

Packing Includes:

1* Immersion water heater

1* User manual

1* Packing box

1* Digital Thermometer

• Heat Water in Minutes: Rated power 1500W, our 120V water heater element can convert electric into heat quickly, the high quality stainless steel has a good ability of heat transfer, along with the porous protective shell, the heating pipe will exchange heat with water constantly. Heat 5 gallon water just need several minutes.
• Safe Ensuring: Covered with durable tough stainless steel outer case, the portable water heater becomes safer for using. It can avoid the exposure of the heating pipe directly. Ensure the safety of human & animals. Besides, it avoid accidents caused by the overheating of the container.
• Temperature Monitoring: We prepared a temperature monitor for our immersion water heater to help you monitor the real time temperature of the water. Put the metal measuring head in the water, the temperature will show on the LCD display in seconds. Get the water of the temperature you want easily without touching by your own hands.
• Application Scenarios: This bucket heater can be used for many containers. Put it under the water, then plug in, it will heat the water automatic. You don’t need to worry about your plastic bucket will be melt by the heat pipe, because of the outer case, they will never touch each other.
• Warning: Dear customer, please keep in mind if you are using this bath water heater: 1.Do not left it along if you are heating Water; 2. Please immersed it in water completely; 3. Plug out and take out the heater before you touch the water; 4. If there is any problem, please stop using and cut out the power immediately, contact us at the first time.

• Twice the Power: Heat water faster with our 1800-watt water heater and within minutes the water (About 5 gallons) will be noticeably warmer. (Warning: - When heated, it is prohibited to put a hand in the water to test the temperature, one needs to always unplug first before touching the water - It is required to fully immerse the heater in water to avoid any potential fire hazard).
• Rust Proof Stainless Steel Guard: The protective guard ensures no direct exposure to the heating element by people or pets. Heat dissipates to the water faster by flowing through the holes in the guard.
• Easy to Use: Fully submerge the UL 499 Standard certified heater in a bucket, tub or trough of water and plug into a grounded 120v plug. You can submerge the handle and cord. Feel the difference in a few minutes!
• Widely Application: The immersion water heater can be used in water, especially fit for heating water in large size container like bucket, basin, bath tub, mini inflatable swimming pool, etc.
• For any Cold Weather Application: Heat your farm animals’ water, your tiling water on the job site, car wash bucket, pail of bath water in a tiny home or camper, window washing water and more! WARNING: Remove the heater before touching the water and please do not continuously use for over 4 hours!

User questions & answers

Question:	Is the digital thermometer probe-end waterproof
Answer:	Sure, because you’re not supposed to touch the water when the heater is in it. Unplug and remove the heater before getting in.
Question:	Is this hot to the touch? Looking for an option for an 8 ft inflatable pool
Answer:	Approximately 90 minutes??? Guestimation.
Question:	Will it shut off if there is less than 8 inches of water in the bucket
Answer:	outlets are rated as 15 amps or 20 amps they are never rated as watts, you can go to a watts = amp chart on line
Question:	How long will it take to heat up a bath tub
Answer:	No temperature cap, it will just boil the water away if in something like a 5 gallon bucket.

Product features

Rust Proof Stainless Steel Guard

The protective guard ensures no direct exposure to the heating element by people or pets. Heat dissipates to the water faster by flowing through the holes in the guard.

Thicker Copper Wires Than Regular Ones

Fully submerge the UL-listed heater in a bucket, tub or trough of water and plug into a grounded 120v plug

Must Fully Covered by Water

Heat water faster in minutes (About 5 gallons) will be noticeably warmer. (Please do not plug two heaters on the same outlet)