13 best ldr water heaters

Product description

Get hot water where it's needed, when it's needed with the Bosch ES4 Tronic 3000 T Electric water heater. This 2.5-gallon capacity point-of-use mini-tank fits right under your sink and provides a practical and effective solution to your hot water needs. This smaller model can be plugged right into a 120-volt outlet with the 36-37" cord, or can be installed in-line with a larger hot water source to provide "on-demand" use. The glass-lined tank offers great insulation and added durability, while the heater's fast recovery rate eliminates long waits for hot water. An external dial allows you to easily control the temperature range, and the temperature-and-pressure relief valve enhances your safety. The ES4 Tronic 3000 T from Bosch has a sleek and attractive exterior design that blends in seamlessly with existing decor when installed in a visible location, making this heater a great option in any room.

Manufacturer Contact Information

800-283-3787

• CONVENIENT HOT WATER HEATER: 2.5 gallon point-of-use mini-tank fits under your sink to provide hot water right where you need it. Thermal efficiency is 98%. Dimensions : 13.75 W x 13.75 H x 10.75 D Inches
• LONG LASTING QUALITY: This electric water heater is easy to maintain and has premium glass-lined material for a long service life. (Amps 12A, Volts (VAC) 120)
• INDEPENDENT INSTALLATION: 36-37" cord plugs into a 120 volt outlet for independent installation or in-line with a large hot water source
• FAST RECOVERY RATE: Eliminates long waits for hot water at your sink, get on demand hot water at your every need (supplies up to 2 sinks at a time)
• EASILY MOUNTED: Can be shelf, wall or floor mounted (bracket included); simply tap into the cold water line and install the water heater directly at the sink to provide hot water

User questions & answers

Question:	Is it necessary to connect an expansion tank to this heater (for safety purposes)? It states something to that effect in the user manual
Answer:	The expansion tank for this heater is not required. Most people already have these installed in their homes but if not then it would be Ok without it as there is a pressure relief valve on top if something happened. GlobalTowne is an authorized Bosch distributor.
Question:	would this be able to supply a shower
Answer:	A standard flow shower head is around 2.5 gallons per minute. A low flow head is around 1.5 gallons per minute. The recovery rate for a 90 degree temperature rise is 6.8 gallons per hour! So even the 7.5 gallon unit would only provide 4 minutes of shower time before the temp dropped off dramatically. (even at the low flow rate..)
Question:	Can be used "in-line with a large hot water source"? Would it help a large bathtub that runs out of hot water before it gets full from main tank
Answer:	If your bathtub is bigger than your main heater tank, this unit isn't going to do much for you. It will add 2.5, 4, or 7 gallons to the capacity of your main tank, depending on which Bosch unit you buy. The 7 gallon unit requires a specially wired circuit. You will also get a little bit of lukewarm water that was in the line between your main heater and the Bosch unit. Unless your main tank is awfully small and your bathtub massive, the 4 gallon unit should work for you. Maybe a demand type thankless heater in your bathtub hot water feed would be a better choice, but be careful to size it properly for your desired flow rate and temperature rise. Also a tankless is likely to require special wiring.
Question:	When this heater is connected to the hot water line, what happens with the cold water that was sitting in the pipes
Answer:	When the tap is opened, the hot water in the unit flows out. The colder water that was sitting upstream of the unit, enters the unit to be heated. If the tap remains open, the newly heated water flows out, being replaced eventually, (depending on the distance to the main water heater), with the water from the main water heater. You will probably set the unit temperature to equal the main water heater temperature, if you want to keep a constant temperature, but other scenarios are possible.

Product features

Bosch ThermoTechnology

The Bosch Tronic 3000 T point-of-use electric mini-tanks are available in three compact sizes, which can be wall-hung (bracket included) or floor-mounted. They fit easily under a sink, even in a cabinet space, and because they have a sleek and attractive design, they blend in seamlessly with existing decor when installed in a visible location. Simply tap into the cold water line and install the water heater directly at the sink to provide hot water. Great for a wide range of locations!

Water Where You Need It

Provides hot water quickly at point of use and comes with temperature /pressure relief valve installed - 2.5 and 4 gallon tanks feature a simple 120 VAc plug-in connection (1440 watts).

Quality for Long-Life

Thick CFC-free foam insulation for maximum energy efficiency, glass-lined tank for durability.

Great for Small Spaces

Water heaters are compact and lightweight and can be floor, shelf, or wall mounted (except 7 Gallon) - features a sleek and attractive design to blend seamlessly with decor.

Minimize Wait Time for Hot Water

Waiting for hot water at a sink located far from a primary heating source can be frustrating. Only having access to cold water from a sink is just not useful, and plumbing a hot water line to every sink in a home or business requires time and money. To get hot water where it’s needed, when it’s needed, a better solution is to use the Tronic 3000 T from Bosch: a point-of-use electric mini-tank heater. This heater can supplement a primary water heating source, or be used under a single sink. In fact, the Bosch Tronic 3000 T can be used for three different applications: as a sole water heating source for a single sink, as a supplement to an existing heater located far from the sink, and as a buffer installed in-line with tankless water heaters that experience intermittent cold water, also known as 'cold water sandwiching'. No matter the configuration, there’s minimal stand-by loss from this premium mini-tank water heater.

• High Power: 1500W, 120V (MUST USE 15A OUTLET, THE HEATER IS 12.5A CURRENT)travel immersion water heater, High power for quickly heating, heats 5 gallons of water in few minutes, portable immersion heater will heat water continuously over 180 degrees F and towards boiling(It can't boil water).greatly saving your time. Note:people can't be in the water while the heater is working.
• Thermostat and Auto Shut off - The middle stainless steel tube contains a thermal overload safety switch, when water reaches a certain temperature(about 180-194 degrees F), immersion heater for water can automatically cycle on and off to maintain water temperature. It will not overheating and save power.Dry burning will auto shut off power to avoid catching fire.
• 304 Stainless-steel Guard - The heavy duty 304 stainless-steel guard on the electric bucket heater protects the heating element from directly contacting persons or animals. The holes on the guard help release heat into the water faster.
• Simple Operation - Immerse in water at proper level. Plug into any grounded wall outlet. Check power indicator light in plug to make sure the water bucket heater is on. then the portable water heater starts working. Warning: the cord and handle can't be submerged in water.
• UL-Listed against to the US safety standards, 12-month warranty. Package included: 1 pack bucket heater + Manual.

User questions & answers

Question:	How deep does the water need to be for it to work
Answer:	Hello, just make sure the water is always cover the stainless steel guard is OK, to avaid any dry burning, thanks.
Question:	How long would it take for two of these to heat up at 12ft Intex pool by about 5-10 degrees
Answer:	Assuming the surrounding air wouldn't cool the pool down (which is does), that your pool is full (assuming 2000 gallons) and the heater can run continuously. It would then take close to 3.5hours to heat 1 degree Fahrenheit.
Question:	Can this be used in a bathtub or a granite sink
Answer:	I dont see why not i use mine in a 20 gallon aluminum tub and it only takes 20 minutes to heat up
Question:	can I use it as the regular 110 vintage even it says 120 volts
Answer:	yes, it will work fine

Product features

GESAIL UL-Listed Bucket Water Heater - 1500W 120V

Why Choose Our Immersion Water Heater?

1. High power for quickly heating, greatly saving your time.

2. UL-listed for USA and Canada, complies with electrical safety standards.

3. Widely application, perfect for winter time job.

4. High quality stainless steel, anti-rust, durable.

5. Stainless steel guard to prevent scalding of hands.

6. Heavy-duty water resistant power cord, perfect for indoor and outdoor use.

Safe Enough to Touch Water When Plugged in

Unlike other products, our electric water heater allows you to put your hands into the liquid when the heater is plugged in, no worry about you will suffer from electric shock, UL-Listed makes it more professional and safer.

Warning:

Don't use extension cord. don't plug 2 heaters on the same outlet.

Make sure the water is always cover the stainless steel guard to avoid dry burning.

Product description

606 series. 1650/120V. UL listed. No dip tube since the bottom inlet eliminates need for it. 1" foam insulation/16.00 R-value. Factory installed T&P valve. Meets NAECA codes. Glass lined tank. Inlet and outlet connections on side for easier installation in tight spaces. Warranty: 6 year tank/parts.

From the Manufacturer

Series 606 electrics provide up to 4,500 watts/hr. input — plenty for all your hot water needs.

• Ideal for under counter or crawl space installation
• 6 gallon short, 6 year warranty, electric.
• Single 120 volt 1650 watt copper heating element.
• Side mounted cold water inlet and hot water outlet for easy installation.
• Factory installed Temperature and Pressure, T&P relief valve

User questions & answers

Question:	Does this plug into a 110 recepticle or do you need to hard wire it
Answer:	From the description of the item, "Dimensions (each): 16.75W x 4.5D x 11.5H in"
Question:	can i plug this in to a regular wall outlet? if so would it need its own outlet
Answer:	My experience with these filters has been the replacement intervals is more about how much water you are going through than it is about time. I probably replace them every 20 fillups. I know it is time to replace them when the water stops absorbing more than halfway up the wick filter.
Question:	how many amps does the water heater use
Answer:	Hi, Vince. Thank you for the question. The highest humidity setting is 65%. Thanks. -Natalie, Essick Air Products
Question:	Does this water heater have a sacrificial anode to protect it from corrosion? I am replacing an ariston 2.5 that rusted out very rapidly
Answer:	Yes. I own one. The Kenmore model number is Model 758.154200

Product description

The Ldr Water Heater Installation Set includes everything you need to safely and securely set up your new water heater system. Compatible with all ¾ inch water systems. Can be used for a new system as well as to replace the piping on an existing system. The set includes two quality 15’’ inch flexible Stainless Steel water connectors. The connectors are flexible to work with for easy installation. They are compatible with standard ¾ inch water lines. The set also includes compression fittings that will allow for the water lines to be connected to non-threaded copper piping as well. The fittings are made from quality lead free brass. Included Teflon tape and easy illustrated step by step instructions will have you setting up your water heater in no time.

• Everything You Need for Connecting ¾'' copper or galvanized hot and cold water lines to your gas or electric water heater
• For New or Old Water Heaters with ¾'' water lines compatible with threaded water lines or the included pipe connectors for a leak free compression fitted connection to non-threaded copper piping; no soldering required
• Two 15'' Flexible Water Connectors, two ¾'' compression connectors, over 7 feet Teflon tape, illustrated easy to follow step by step instructions
• Compatible with All ¾ Inch Water Systems. Can be used for a new system as well as to replace the piping on an existing system
• Compression Connectors for non-threaded copper piping are made of solid lead free brass

Product description

LDR 609 2500 Sediment Trap for Water Heater. Used with residential hot water heater. Includes gas leak detector, yellow gas tape, 1/2-Inch black cap, tee and nipples. Ensure your water heater is up to code to ensure safety. LDR is the leader in high quality kitchen, bath and plumbing products for home improvement. Look for more high quality LDR plumbing fixtures, rough plumbing and decor options.

From the Manufacturer

LDR 609 2500 Sediment Trap for Water Heater. Used with residential hot water heater. Includes gas leak detector, yellow gas tape, 1/2-Inch black cap, tee and nipples. Ensure your water heater is up to code to ensure safety. LDR is the leader in high quality kitchen, bath, and plumbing products for home improvement. Look for more high quality LDR plumbing fixtures, rough plumbing, and decor options.

• Includes gas leak detector, yellow gas tape, 1/2-Inch black cap, tee and nipples
• Ensure your water heater is up to code to ensure safety
• LDR is the leader in high quality kitchen, bath and plumbing products for home improvement
• Look for more high quality LDR plumbing fixtures, rough plumbing and decor options

User questions & answers

Question:	pipe are made of black steel alloy (contains carbon) or black iron metal
Answer:	I consider it quiet. Makes a deep rumble when heating but I don't hear it inside house.
Question:	Can this be used for furnace gas line drip leg
Answer:	This is not combine pedal,one pedal take one action, hope it can be helps for you.
Question:	Can you use this for a tankless water heater
Answer:	Yes, it can be works with below system: (1)Dos (2)Win 2000 (3)Win xp (4)Win 7 (5)Win 8 (6)Win 10 (7)Linux (8)MAC (9)Android BUT please Notice: Please configure it on Windows PC with the provided software. That's meaning you'll need to install the drive on a Windows computer and configure what you want to do. Once set, then plug into your Mac or other system.
Question:	is the 3/4 in or 1/2 in
Answer:	There is a virtual keyboard on the software, can you try to map the ctrl+right move or ctrol + left move key to see it can be works for it. As this USB foot pedal like a mouse or keyboard, it can be program any key in your keyboard or mouse, and media play, game controller, string ect, thanks.

Product description

The 5ft Garden Hose and Dehumidifier Drain Hose great to use around your home - Indoor or Outdoor - and a piece of equipment for serious gardeners to have around. This flexible yet durable drain hose will give you peace of mind as you can also use this as a drain hose for your dehumidifier.

From the Manufacturer

LDR 504 1300 Utility Drain Hose, 5-Foot, Rubber. 5-Foot Rubber Utility Drain Hose has a 3/4-Inch female connection on one end.

• FUNCTIONALITY: This 5ft Drain Hose will provide you convenience as this can help you with any small maintenance job around your house, garden, garage or to reach hanging house plants. It can also use as dehumidifier drain hose.
• COMPATABILITY: Since it has a female thread on one end, it will fit most female coupling hose reels or fits most 3/4-Inch hose thread outlets.
• DESIGN: This hose is designed to lay flat and not coil to provide a closer fit with the washing machine
• CONVENIENCE: This drain hose is the perfect length to connect your hose reel to the faucet or help you connect to a hard-to-reach spigot. It is also customizable to your desired length.
• COMPACT AND EASY TO STORE: This small garden hose is lightweight and flexible that can easily be rolled up and store in small spaces.
• This short hose is constructed from Rubber material for its durability and flexibility.

User questions & answers

Question:	does this fit on an outdoor faucet
Answer:	The only noise which is very low is the water going thru the input to out put lines, There is no motor, You may be hearing vibration from pipes connected to heater, Make sure all pipes and fittings are tight. When flame ignites you will hear a howl from the heater flames. When heater is not in use and cooled down, Cover it with a tarp, also if you turn gas line off when not in use I would put a sticky board inside the front to keep insect from moving in..Enjoy.
Question:	what is the inside diameter of hose is the 5/8 3/4 or
Answer:	It will heat the water to the temperature you set it too. However, you will only be able to choose one temp at a time for the water it discharges into the pool or spa.
Question:	where can I find a frigidaire dehumidifier drainage joint
Answer:	Check with your local pool service co and pool builders ... they should be able to ... my husband installed ours .. he just disconnected the old one and installed the the new .. no modification needed
Question:	Can you cut this to make it shorter
Answer:	Absolutely happy, our pool guy said he couldn't buy it for that price. Heats quickly... If you install it yourself make sure you turn the switch "on" inside on the control board. Heats quickly

Product description

3/4-Inch NPT 200 lb. Pressure Gauge for Use With Water Only. CSA Approved and 100 percent Pressure Tested at the Factory.

• 3/4-Inch NPT
• 200 lb. pressure
• For use with water only
• ANSI B2.1 for pipe threads and ANSI B2.4 hose threads
• CSA Approved

User questions & answers

Question:	Can this be left in use connect installed permanently indoors safely? 0.75 inch npt
Answer:	1/2"
Question:	There's one right arm and one black arm on the gauge which one is the one that tells me the water pressure for the house
Answer:	No transformer.
Question:	is this lead free
Answer:	36.5 inches tall by 26 inches wide. A very good pool heater!
Question:	How do I warranty this item
Answer:	Ours is outside so we don't need it.

Product description

Aigostar Juliet- Mini Electric Tea Kettle, BPA Free, 1.0L, 1100W, Hot Water Heater, Grey and White

CORDLESS KETTLE SPECIFICATIONS:

Operating power: 1100 watts

Dimensions: 8.1 X 6.0 X 7.4 inch

Kettle capacity: 1.0 liter

Cable length: 30 inch roughly

WATER HEATER FEATURE:

- Convenient indicator windows to view the water level

- Automatic shutoff with boil-dry protection

- Easy to storage with cord wrap

- Removable filter in the spout

- Easy filling with broad opening

NOTE

1.Please read the instruction manual before use.

2.Before using the kettle for the first time, fill the kettle with cold water and boiled it twice without any additives and dry it naturally to avoid the normal plastic smell.

3. The body of the kettle will be hot when water boils, pls only grab the handle to pour hot water.

4.If rust or mineral deposits are detected from hard water at the stainless steel bottom, boil water on medium heat for 15 min. with 1 oz. of lemon juice. Rinse and dry.

Offered 2-year warranty, for any defects in the materials or craftsmanship of any AIGOSTAR products, please kindly contact us and we will be glad to assist you.

• 【BPA Free】Still squeamish around the plastic kettle? We know that! So the BPA-free and Food Grade plastic is your healthy choice on the budget! The plastics that have been shown to cause cancer are used to make clear, hard containers or soft, flexible products. But, our kettles DO NOT fit into either of these categories.
• 【Compact】Electric water kettle with 1.0-liter capacity suitable for 1-3 persons, wide-bottom design compared to its compact size for fast boiling (110V ~60Hz)
• 【Simple】The 120°broad opening lid folds out of the way for the easy filling. Easy to storage with cord wrap for compact space. Turn the kettle on and forget it with the automatic shutoff function. All of these are to serve your simpler life and save time for thinking big.
• 【Safety】We always consider your safety as first. The handle leaves enough room to keep your hand away from body for your burn-free use! And the boil-dry protection can avoid the wrong operation risk. The removable filter design in the spout is a very nice way to combat the very hard water which will leave large amount of limescale.
• 【Clean & Furthermore】Mix 3 tbsp of vinegar or lemon with water, and leave 5-8 hours after boiling or overnight to clean those deposits or "rust" Away. If you have any questions about our products, you can always contact us and we will be happy to help.

User questions & answers

Question:	Is this quiet enough for an office setting
Answer:	Yes. I use my kettle at my office desk. I make sure to turn the kettle off b4 the water starts to boil. If u let the water boil, u can hear the steam
Question:	Can a whole hand fit in the top
Answer:	I didn’t receive the item since it got lost in transit and I did not reorder this item.
Question:	What temperature does this heat water to
Answer:	It boils... the temp really depends if you are at sea level to be specific... but the average boilikg point is 212°F.
Question:	How do you get the kettle to stop smelling and water tasing like plastic
Answer:	I added a couple tablespoons of distilled White vinegar and a sprinkle of baking soda to the water, boiled, let it cool, rinsed and boiled water again to get the vinegar smell out.

Product features

Aigostar Romeo - Mini Electric Tea Kettle

• Convenient indicator windows to view the water level
• Automatic shutoff with boil-dry protection
• Easy to storage with cord wrap
• Removable filter in the spout
• Easy filling with broad opening

Cord Storage

The cord can be integrated stored at the base when it’s not in use, making your kitchen worktop neat and tidy

Temperature Control

The boil-dry protection can avoid the wrong operation risk.

Filter Net

A very nice way to combat the very hard water which will leave large amount of limescale.

• ✔ 【Heating Water in Minutes】Submersible electric heater makes water heating more efficiency and boil 5 gallon of the water in minutes, all you need to do is just put the heater in to the water then connect the 120V power supply, easy to use.
• ✔ 【Easy to Use】Place immersion heater for water in a container designed to contain boiling water, fill the container with water to full cover the submersible bucket heater shield(including stainless-steel guard and plastic part), plug portable water heater into a properly grounded 120V AC outlet, make sure the portable immersion heater is on, Feel the difference in a few minutes!
• ✔ 【Warning】①The heater needs to be completely immersed in water in working condition②Do not use it for more than 3 hours continuously! ③Please do not plug the two heaters into the same outlet to avoid fire hazards. ④Please take out the heater before touching the water!
• ✔ 【High Quality & Safety】With high quality stainless-steel protect cover,submersible water heater will effectively prevent the heating element is in direct contact with people or animals and heat dissipates to the water faster by flowing through the holes in the guard.We select the high performance heating element which has been strictly tested to ensure the superior quality, durable and reusable.
• ✔ 【Widely Application】The Immersion Water Heater can be used in different size container like bucket, basin, bath tub, mini inflatable swimming pool, etc.Unlike the common bucket heater, in appearance, this water heater is lighter and smaller,making it perfect for travels and road trips.

User questions & answers

Question:	Can you use it in cast iron tubs safely as well
Answer:	Depend on the breaker and other appliances being used simultaneously. It draws 8.333333 amps.
Question:	How long does it take to heat 60 gallons to roughly
Answer:	my husband says it is possible. But it would take at least a couple days.
Question:	I don't wish to rely on user replies. Why doesn't the ad state the wattage
Answer:	Hello, First, make sure the orange light(indicator light) is on inside the plug. Secondly, heat less water and see if the temperature has changed, If the water temperature changes, we can mare sure that the water heater is ok. It just takes longer to heat the water in your bathtub. Or you heat water in a bucket and pour it into the bathtub， please try again, thank you.
Question:	Is there a temperature cap? How hot can it heat the water
Answer:	No. You would need about 50 of them. It takes 15 to 20 mins to heat up a five gallon bucket warm enough to take a shower.

Product features

Are you looking for a safe and fast-heating immersion heater?

If yes, OUTERDO Immersion Water Heater might best be choice. The immersion water heater can heat water in minutes. It can be used in portable pools, buildings, animal husbandry, car washing, indoor use and many other uses in cold weather!

Note:

If you receive damaged or wrong items, please attached pictures about the problem, we will offer you a satisfactory solution within 24 hours.

Safe & Intelligent

There is awaterproof indicator on the back of the heater. When the red light is on, itmeans that the work has started.

The bottom is with an insulator while the smooth stainless steel guard aims to avoid scalding injures, freely to use.

Protective cover

The anti-rust stainless steel guard cover is provided on the outside of our heating rod to prevent burnsand increase the life of the heating tube.

Thicker Copper Cord

Adopt the high quality copper power cord in thicken design to carry more electricity without causing overheating, smoke or fire, adds more security while using.

Why Choose Our Immersion Water Heater?

• 1. High power for quickly heating, greatly saving your time.
• 2. Complies with electrical safety standards.
• 3. Widely application, perfect for winter time job.
• 4. High quality stainless steel, anti-rust, durable.
• 5. Stainless steel guard to prevent scalding of hands.
• 6.Heavy-duty water resistant power cord, perfect for indoor and outdoor use.

Package Contents:

• 1 x Electric Heater
• 1 xLCD digital thermometer

• 4' LONG, PAIR of Stainless Steel Washing Machine Hoses. Red colored for Hot Water and Blue colored for Cold Water
• FITS ALL WASHERS - Flexible Universal Washer Hose easily Connects to normal household Water Supply Lines in the Laundry room. Perfect for Homeowner or Contractor Installation.
• BURST PROOF Washer Hose Design and 5 YEAR WARRANTY
• WIDE OPENING ALLOWS WASHERS TO FILL 50% FASTER than other leading brands on Amazon- Spend less time waiting for Laundry
• LEAD FREE AB 1953, Grade 304 Stainless Steel, PVC Core. BRASS nuts, ferrules and nipples for superior Corrosion Resistance. UPC Certified

User questions & answers

Question:	Will they last 32 years like the first set
Answer:	Likely not. The best washing machine hoses on the U.S. market are made by Floodchek in Tennessee and they come with a *20 year* warranty. They're made to industrial standards and each double hose set begins at 5 feet long and go from there. They're about 2.5 times as expensive as this set and will likely outlast your washing machine's lifespan by *double*. Watch the YouTube video, then check out their website: floodchek.com. These are not sold on Amazon. I installed a set awhile ago and they're absolutely worry-free. The next best thing to Old School solid copper water lines direct into your washing machine.
Question:	Do these come with the host washers
Answer:	Yes, high quality hose washer inserts are included on all connections and come pre-installed.
Question:	How to stop water hammer and wild vibration. Water is all the way on, pressure good. drained all the pipes and refilled to release any air
Answer:	Look up how to install water hammer arrestors on washing machine on you tube .com or "stopping water hammer after replacing washing machine hoses" on you tube .com you can find videos and related info on causes and fixes. Hope this helps.
Question:	Does it allow more water flow? Anyone notice a difference
Answer:	It does not allow more water flow. It makes the hose stronger.

Product features

Kelaro Stainless Steel Washing Machine Hoses

A bad washing machine hose can flood your entire laundry room in minutes. A good washing machine hose will keep your laundry room dry for years.

Our UPC certified washing machine hoses feature a lead-free universal design to fit all household washers. These heavy-duty washing machine hoses feature premium nickel plate brass nuts, ferrules, and nipples for superior corrosion resistance. Don't worry about a product as essential as your washing machine hoses.

Product description

Description

This pressure gauge is designed for water pressure measuring in the irrigation system, house etc.



Dial size : 2-1/2"

Process connection : 3/4" hose upper mount female

Case : Black steel case and bezel

Window : Clear plastic, with maximum pressure memory

Dial plate : aluminum, with pointer stop

Pointer : Aluminum, black, DIN style

Boudon tube : Copper alloy

Movement : Brass

Connection : Brass

IP class : IP43

Accuracy : +/-3-2-3%

Pressure range : 0-200psi/kpa, double scale

Working temperature : -4 to 140 deg F/-20 to 60 deg C

Ambient temperature : 140 deg F/60 deg C maximum







Measureman has 20 years rich experience in the measuring of pressure, temperature, flow, level industries, The "Measureman" branded products are the combination of continuous good quality and affordable price. "Measureman" products are selected and designed by professional engineers.

• For water pressure measuring in the irrigation system, house etc.
• 2-1/2" dial size, 3/4” female hose thread adapter attaches directly to faucet or hose
• Pressure range: 0-200psi/kpa double scale, with Maximum Pressure Memory
• Black steel case, brass wetted parts, dry
• Accuracy: +/-3-2-3%

User questions & answers

Question:

is this lead free

Answer:

Have never installed one on this particular appliance. However, If the tankless appliance uses gas for heating the water, a Sediment Trap should generally provide protection to the tankless internal gas components. However, you should check first with your County, State, and/or manufacturer to determine whether it is required and/or if that particular device or product can be safely installed on your tankless gas water heater. Most tankless water heaters I am familiar with, are electric.

Product description

2000W, 120v/110v, Immersion Heater let your water heat up in just a few minutes. Equipped with a Fahrenheit water temperature gauge, let the water temperature reach the temperature you want to end the work of the heaterat any time.



Protective Cover

A 304 stainless steelprotective cover is provided on the outside of our heating rod to prevent burnsand increase the life of the heating tube.



Easy to Use

No any driver is required, just full immerse the water bucket heater in the water and plug into a 120V power socket, then the heater can automatically start heating, easy to use without complex steps. Come with a digital thermometer, easy to measure water temperature, just unplug when reach the water temperature you need.



Why Choose Our Immersion Water Heater?

1. High power for quickly heating, greatly saving your time.

2. Complies with electrical safety standards.

3. Widely application, perfect for winter time job.

4. High quality stainless steel, anti-rust, durable.

5. Stainless steel guard to prevent scalding of hands.

6. Water resistant power cord, perfect for indoor and outdoor use.



Package included:

1 × pack bucket heater

1 × digital thermometer

1 × Manual

1 × steel wool

1 × sand paper



Note:

1. Don't use extension cord. don't plug 2 heaters on the same outlet.

2. Be sure to put the temperature sensor and the heating tube in the water before turning on the power, otherwise the heating tube will be damaged immediately!

• 【Fast Heating】2000W of power can make 5 gallons of water warm in a few minutes. Before inserting the heater, please make sure that the heater is completely immersed in the water then connect the 120v/110v power supply.
• 【Premium and Safe】With high quality stainless-steel protect cover,submersible water heater will effectively prevent the heating element is in direct contact with people or animals and heat dissipates to the water faster by flowing through the holes in the guard.Durable and reusable.The holes on the guard dissipates heat into the water faster.
• 【Simple Operation】Immerse in water at an appropriate water level and plug into any grounded wall outlet. Then the 2000 immersion heater can start working. Package included: 1 pack bucket heater + 1 digital thermometer + Manual + steel wool + sand paper.
• 【Widely Used】Our portable water heater is suitable for portable bathtub, pool heater, pond heater, water trough heater, bucket heater. Especially fit for heating water in large size container like bucket, basin, bath tub, mini inflatable swimming pool, etc.
• 【Safety Tip】1.Make sure completely immersed in water in working condition. 2.Do not use it for more than 3 hours continuously! 3.Please do not plug the two heaters into the same outlet to avoid fire hazards. 4.Please take out the heater before touching the water!

Product description

Choosing the right inflatable pool heater will make your water hot in a few minutes. STIRLOVE water heater kit is equipped with a Fahrenheit water temperature meter to allow the water temperature to reach the temperature you want to stop the heater at any time.



Safe & Easy to Use



There is awaterproof indicator on the back of the heater. When the red light is on, itmeans that the work has started.The bottom is with an insulator while the smooth stainless steel guard aims to avoid scalding injures, freely to use.



Thicker Copper Wires Than Regular Ones



Fully submerge the UL-listed heater in a bucket, tub or trough of water and plug into a grounded 120v plug



Nominal Voltage: 110 V - 125V

Power: 1500W



Packing List:

* 1 electric submersible water heater

* A Fahrenheit water temperature

* 1 stainless steel sponges



Warning:



Don't use extension cord. don't plug 2 heaters on the same outlet.

Make sure the water is always cover the stainless steel guard to avoid dry burning.

• 🔌【Container Security】Livebay immersion water heater will not damage your container while heating, no matter what material it is. Please not: Do not touch if you are using a metal bucket.
• 🔌【Temperature Detector】Put the metal probe in the water while using an immersion water heater, to observe the temperature. Do not put the monitor in water!
• 🔌【Premium & Safety】The submersible electric water heater is made of high quality heavy-duty 304 stainless steel protective cover, which can effectively prevent the heating element from direct contact with people or animals, and quickly dissipate the heat into the water through the holes in the protective cover.Sturdy and durable, it can be used many times without causing any damage.
• 🔌【Scope of Application】: Put the bucket heater in a container, fill the container with water to completely cover the protective cover of the diving tube heater, and then plug it into a properly grounded 120V AC power outlet. Check the power indicator in the plug to make sure that the immersion heater is on and it will continue to heat the water until it boils.
• 🔌【Warning】: 1.The portable immersion bathtub heater needs to be completely immersed in water in working condition. 2.Do not use it for more than 3 hours continuously! 3.Please do not plug the two heaters into the same outlet to avoid fire hazards. 4.Please take out the heater before touching the water!

User questions & answers

Question:	Can you set temp at 102f
Answer:	No there is not temperature settings. However it comes with thermometer.
Question:	How warm will a five bucket get, using this heater
Answer:	Hello there, The water heater is most suitable for heating 5 gallons of water. Due to different external factors, the time required to heat to the same temperature is different, resulting in a difference in time. If you need to heat to 150 degrees Fahrenheit, you need to extend the heating time. Best wishes LIVEBAY Customer Service
Question:	Can this be used in salt water? I have a 150-gallon float tank with water full of epsom salt that needs a heat boost before someone steps in
Answer:	I don’t see why not