13 best air powered metal shears

Product description

Muffled handle exhaust for quiet operation. Planetary cage gearing for heavy duty use. Ability to cut up to 18 gauge steel

• Hardened shear head can cut up to 18 gauge steel
• Planetary gearing for long life and heavy duty use
• Bottom handle diffused exhaust for quiet operation and keeps air away from the work surface
• Sunex 1 Year Warranty

Product description

Dicfeos Double Head Metal Sheet Nibbler Cutter with circle cutting accessories, drill attachment with wrench and parts, maximum 14 gauge steel

• Fitting effortlessly into any standard drill. It can glide through material up to 2mm thick or 14 gauge and creates a precision, burr free edge
• Sheet metal, corrugated material, pipes, Complex profiles, powder coated material, stainless steel, copper, aluminum, Formica, plastic, fiberglass. It is so versatile and it can handle it all with ease
• Cut in any direction and follow the profile of the material. Gutters, roof sections, Complex shapes or stencils can be cut with precision as it can move anywhere within 360 degrees.
• Straight and Circle cutting, you can also effortlessly cut beautifully
• 2-Year warranty

User questions & answers

Product features

Drill a Starting Hole

4-12 MM step drill bit helps you to drill a starting hole for the nibbler before cutting a perfect circle with it.

Circle-cutting with Ease

The circle cutting accessories will helps you to cut a perfect circle,the maximum diameter can be 11-2/5 inch

360 Degree Cutting Head

The 360 degree cutting head allows easy control and has no problem to cut straight curve and circles. It will be a big time saver for cutting sheet metal

Product description

The DEWALT DWASHRIR Impact Ready Shears Attachment is able to cut up to 18GA material including but not limited to: Sheet metal, corrugated sheet metal, duct, asphalt shingles, steel mesh, vinyl siding, wire, plastics, cardboard and rubber. This tool features a 360 degree swivel head that allows for maneuverability when cutting. Connects via standard 1/4-inch hex shank. This attachment works with most 18V-20V impact driver and drills, regardless of brand. Attachment only, drill not included.

• Able to cut up to 18GA material
• 360 degree swivel head for maneuverability
• Connects via standard 1/4-inch hex shank
• Compatible with most 18V-20V impact driver and drills
• Able to cut up to 18GA material
• Connects via standard 1/4-inch hex shank
• Compatible with most 18V-20V impact driver and drills

User questions & answers

Product features

DWASHRIR Impact Ready Shears Attachment

The DEWALT DWASHRIR Impact Ready Shears Attachment is able to cut up to 18GA material including but not limited to: Sheet metal, corrugated sheet metal, duct, asphalt shingles, steel mesh, vinyl siding, wire, plastics, cardboard and rubber. This tool features a 360 degree swivel head that allows for maneuverability when cutting. Connects via standard 1/4-inch hex shank. This attachment works with most 18V-20V impact driver and drills, regardless of brand.

Product description

The Ingersoll Rand edge EC300 air Nibbler lets you get a bigger bite and better angle cuts. The EC300 holds a tight 1/4 inch radius with great accuracy giving control and cutting power without distorted edges. Air consumption at load: 17 CFM; air inlet size: 1/4 in. Npt; minimum hose size: 3/8 in.

• Cuts up to 18 gauge steel, aluminum, plastic or other metals
• 6 ft. Per minute cutting rate
• At 4200 strokes per minute the EC300 holds a tight 1/4 in. Radius
• Angled head for easy cutting
• Features include an ergonomic grip, low profile throttle lever, and front exhaust

User questions & answers

Product features

Ingersoll Rand Edge Series EC300 Air Nibbler

Get a bigger bite and better angle cuts! The Edge Series EC300 Air Nibbler offers the ability to cut up to 18 gauge steel, aluminum, plastic or other metals in 6' per minute. Even at 4,200 strokes/min the EC300 holds a tight 1/4" radius with great accuracy giving you the control and cutting power you need all without the distorted edges!

True Cutting Power

This tool can deliver. The EC300 cuts up to 18 gauge steel, aluminum, plastic or other metals.

It features a 6 ft. per minute cutting rate. Bring the EC300 anywhere, as it will be ready for the tough jobs.

Elite Accuracy and Control

With its compact design and precision cutting, the Ingersoll Rand EC300 will get the job done right each time. The operator can expect a true cut, no matter the type of task at-hand.

Edge Series Output

Edge Series tools are designed specifically for the personal user or light professional applications. Each tool is durable, powerful and features an ergonomic grip to ease hand fatigue, as well as a convenient exhaust to blow air away from the project. The Edge Series family of tools contains 25 different models for some of the most common consumer uses: bolting, cutting, painting and finishing.

About Ingersoll Rand

Ingersoll Rand has stood at the vanguard of industrial innovation for over 100 years. From air compressor systems to power tools and beyond, the company manufactures products that offer best-in-class quality, reliability, durability, and performance. Ingersoll Rand is also deeply committed to building a better future. At every level of business, the company promotes environmentally sound practices to achieve progress that is truly sustainable. With offices and plants across the globe, Ingersoll Rand strives to meet the world’s growing need for clean and comfortable air, safe and fresh food, energy efficiency, and sustainability.

Product description

The DEWALT DCS491M2 20V max 18 gauge swivel head Shears Kit features a 360 degree tool free swivel head which allows user to access tight quarters while maintaining comfort. Cuts 7/32" strips which continuously curls out of the cutting area providing consistent and accurate cuts. Cordless Shears allows user to take the tool to the work place. Specifications: capacity (stainless steel) - 20 gauge, capacity (mild steel) - 18 gauge, strokes/min - 0-2,300 SPD, min cutting Radius - 5.5 inches. Kit includes: 20V max swivel head Shear, 20V max 4.0Ah batteries, DEWALT charger.

• 360 Degree tool free swivel head which allows user to access tight quarters
• Cuts 7/32" strips which continuously curls out of the cutting area providing consistent and accurate cuts
• Cordless shears allows user to take the tool to the work Place
• Backed by dewalt's 3 year limited Warranty

Product description

Cutting sheet metals will never be the same with REXBETI ultimate nibbler. It's light, compact and sleek. Powered by a standard drill between 1500-3000 RPM, just simply insert the drive shaft in the chuck of your drill and tighten the chuck, exactly like putting in a drill bit. when you start up the drill and the nibbler will be ready to cut. It will be a big time saver for cutting sheet metal and corrugated metal roof sheets. the 360 degree adjustable cutting head allows easy control and has no problem handling any curve or straight you throw to it. Versatile cutting round accessories helps you to easily cut straight and round .Also the iron tool box which holds all parts in helps you no worry to carry them anywhere or lose any.





Features:

Perfect for car repair and house maintenance like metal roof cutting, HVAC vent pipe and other metal sheets

Versatile cutting accessories for ROUND and STRAIGHT cutting

Double cutting heads adjust 360 degree for easy cutting in any space

Different cutting shapes available

Best cutting result without any burrs at the cutting edges

No distortion of material

Cuts any shape to 12 mm radius

Extra nibbler die and punch

Safe to touch, easy to work with

Powered by a Hand Drill - no additional power source needed



Maximum cutting capacities:

- iron/steel plate 1.8mm

- stainless steel plate 1.2mm

- copper/aluminium plate 2mm

- plastic/fibreglass board 2mm



Package included:

1 * metal sheet nibbler cutter

1 * Plastic handle

1 * Cutting round accessories

1 * Extra nibbler cutter die

1 * Nibbler cutter punch

1 * Wrench

1 * Iron tool box

1 * User manual



Notice:

To get the best cutting results, please work it on a corded drill with high RPM ( 1500 - 3000 )

• Easy and fast to cut 14 gauge material and creates a precision, burr free edge
• 360 degree double cutting head to cut straight line, curve line and circles
• HSS cutting blades to cut including but not limited to: Sheet metal, corrugated material, pipes, complex profiles, powder coated material, stainless steel, copper, aluminium, formica, plastic, fibreglass
• Fits any drill that works between 1500-3000 RPM, More easy and powerful than normal shears and snips
• REXBETI versatile sheet metal nibbler, perfect for car repair and house maintenance like metal roof cutting, HVAC vent pipe and other metal sheets

User questions & answers

Product features

Drill a starting hole

4-12 MM step drill bit helps you to drill a starting hole for the nibbler before cutting a perfect circle with it.

Circle-cutting with ease

The circle cutting accessories will helps you to cut a perfect circle,the maximum diameter can be 11-2/5 inch.

360 degree cutting head

The 360 degree cutting head allows easy control and has no problem to cut straight curve and circles.

It will be a big time saver for cutting sheet metal.

• Cut through up to 17-Gauge Cold Rolled Steel without Deformation of Edges.
• Powerful 0.5 HP Motor and 3500 RPM Free Speed Help Get Job Done Quicker and Easier.
• Lever Throttle for Precise Control and Low-Speed Start.
• Durable Composite Over-Molded Light Weight Aluminum Body for Grip Comfort and Cold Air Insulation.
• Heavy Duty Yet Very Low Air Consumption 2 cfm.

User questions & answers

Product features

PRODUCT DESCRIPTION

BERKLING TOOLS BT 7300 AIR NIBBLER MAIN FEATURES

• Professional grade air nibbler is designed for long term service and low maintenance.
• Cut through up to 17-Guage cold rolled steel without deformation of edges.
• Powerful 0.5HP motor get job done quicker and easier.
• 3500RPM free speed, speed is adjustable with built-in air regulator.
• Air regulator is on the top of handle for easy access.
• Composite rubber over-molded light weight aluminum handle for grip comfort and cold air insulation.
• Very low air consumption 2 cfm.
• 1/4" air inlet. 3/8" air hose recommended.
• Product length 7.7" / 195mm. Weight 1.78 lbs / 0.81kgs.

CARE AND MAINTENANCE

• Always check the lubricant oil before each use or after using long period of time to prevent motor from damaging and it will help prolong the life of the air nibbler.
• To open the black cap just use plier to rotate counter clockwise with light force. To close it use plier to rotate the cap clockwise until it is tightly closed but not overly tight.
• Use only high quality lubricant oil specifically for pneumatic tools.

HELPFUL TIPS

• Before connect the plug to the air tools, it is always a good practice to apply few layers of sealant tape on the thread of the plug which will help prevent air leakage and improve the performance of the air tools.
• Do not overly tighten the plug which may cause damages to the air inlet then potentially introduce air leakage as well.
• All our air tools are design to work with 90 psi air pressure. If you have an extra long air hose then increase the air pressure from the air compressor will help compensate the pressure drop when air travel long distance before reach the air tools.

Product description

The DEWALT DCS494B 20V MAX* 14ga Swivel Head Double Cut Shears, Bare tool is a 360 degree tool with a free swivel head which allows user to access tight quarters while maintaining comfort. These shears can cut a 7/32" strip which continuously curls out of the cutting area providing consistent and accurate cuts. They also features an LED work light which illuminates surface areas. Cordless shears allows user to take the tool to the workplace. Capacity (stainless steel): 16ga, Capacity (mild steel): 14ga, Speed: 2,450 spm, Min cutting radius: 5 Inches. This is a bare tool times, battery sold separately. Includes: DCS494 shears, Hex wrench.

• 360 degree tool with a free swivel head which allows user to access tight quarters
• Cuts 7/32" strip which continuously curls out of the cutting area providing accurate cuts
• LED work light illuminates surface
• Cordless shears allows user to take the tool to the workplace
• Battery sold separately
• Battery & Charger Sold Separately

User questions & answers

Product description

Eastwood's Heavy-Duty Air Shears makes clean cuts in metal up to 18-gauge Our air shears is built to match the quality and features of national brands, so it's built for everyday use in auto body shops, sheet metal shops, machine shops...and your shop. 4,500 strokes per minute to aggressively cut through most metals and plastics Slices through up to 18-gauge metal, without chips Cutting head rotates for precise contoured cuts Needs just 4 cfm at 90 psi, so you can use a DIY compressor

• Eastwood'S Heavy-Duty Air Shears Makes Clean Cuts In Metal Up To 18-Gauge.
• 4,500 Strokes Per Minute To Aggressively Cut Through Most Metals And Plastics
• Slices Through Up To 18-Gauge Metal, Without Chips
• Cutting Head Rotates For Precise Contoured Cuts
• Needs Just 4 Cfm At 90 Psi, So You Can Use A Diy Compressor

Product description

The Genesis GES40 swivel head electric metal sheer tool cuts through various metals with ease with a 4.0 amp motor.

- 4.0 Amp Motor

-360° Swivel Head for cutting curves in sheet metal

-Quickly cuts metal roofing, flashing, and other sheet metal up to 14 gauge

-Three blades work to reduce metal deformation

-Cut 14 Gauge aluminum, 20 gauge stainless steel, or 18 gauge Steel

Genesis' two year warranty means you buy with confidence. Cord Length- 72 inches.

• Quickly cuts metal roofing, flashing, and other sheet metal up to 14 gauge | Compare the Genesis metal shear to other drill attachment Shears that can only cut 20 gauge Sheet metal!
• Powerful 4.0 amp motor
• 360° swiveling head for cutting control and convenience |cut circles and curves with the Genesis electric metal shear
• Variable speed (0-2500) SPM for versatility in cutting a variety of materials | cuts through sheet metal up to 14 gauge in thickness!
• Three blade cutting system reduces metal deformation | experience smooth cuts EVERYTIME!

User questions & answers

Product features

Genesis GES40 4.0 Amp Corded Swivel Head Variable Speed Electric Power Metal Shear

Features:

• Quickly Cuts Metal Roofing, Flashing, and other Sheet Metal up to 14 Gauge
• Powerful 4.0 Amp Motor
• 360° Swiveling Head for Cutting Control and Convenience
• Variable Speed (0-2500) SPM for Versatility in Cutting a Variety of Materials
• Three-Blade Cutting System Reduces Metal Deformation
• Cutting Radius of 5-1/2″ and Larger
• Lock-On Switch for Extended Use
• Built-in Belt Clip
• Includes: Hex-Key for Easy Blade Replacement

Product description

Never compromised on quality, fully equipped with state-of-the-art technology - Designed with the user optimal experience in mind. International Renown, constantly modernizing powerful devices to meet the demands of the modern user.

• For professional grade applications
• Works on up to 17-gauge cold rolled steel
• Eat through sheet-metal without deformation of edges
• Cut over an inch a second with unmatched balance

User questions & answers

Product description

Remember when you could cut through metal? Glide through 20 gauge stainless steel or 18 gauge sheet metal with the WEN Variable Speed Electric Metal Shear. The lightweight 4.7-pound design limits fatigue during operation while the powerful 4-amp motor makes easy work out of a variety of metals. The pressure sensitive switch adjusts the speeds of the cut anywhere from 0 to 2500 strokes per minute depending on the force applied. The pivoting head rotates a full 360 degrees to allow for cutting at any angle or direction without having to have an awkward or uncomfortable hold on the shear’s handle. And, because it’s a WEN Product, your purchase comes backed by a two-year warranty, a nationwide network of skilled service technicians and a friendly customer phone line all to make sure you remember WEN.

• Pressure sensitive trigger cuts anywhere from 0 to 2500 strokes per minute
• Attack up to 20 gauge stainless steel and 18 gauge sheet metal
• Lightweight design limits fatigue during operation
• Utilizes a powerful 4-amp motor, curling the metal as it cuts
• Swiveling head rotates a full 360 degrees to meet the needs of any project

User questions & answers

Product features

Shear Metal. Sheer Power.

Remember when you could cut through metal? Glide through 20 gauge stainless steel or 18 gauge sheet metal with the WEN Variable Speed Electric Metal Shear. The lightweight 4.7-pound design limits fatigue during operation while the powerful 4-amp motor makes easy work out of a variety of metals. The pressure sensitive switch adjusts the speeds of the cut anywhere from 0 to 2500 strokes per minute depending on the force applied. The pivoting head rotates a full 360 degrees to allow for cutting at any angle or direction without having to have an awkward or uncomfortable hold on the shear’s handle. And, because it’s a WEN Product, your purchase comes backed by a two-year warranty, a nationwide network of skilled service technicians and a friendly customer phone line all to make sure you remember WEN.

360-Degree Swivel Head

Pivot the head 360° to help accommodate comfortable cuts from any angle or direction.

Cut up to 18-Gauge Metal

The powerful 4-amp motor slices through 18-gauge sheet metal and 20-gauge stainless steel.

Variable Speed Operation

The pressure-sensitive trigger varies the strokes per minute from 0 to 2500 SPM depending on the pressure applied.

Double Cut Design

The double-cut blade configuration creates a 1/4-inch ribbon of curled metal during operation.

Lightweight Design

The lightweight ergonomic design weighs in at a mere 4.7 pounds, limiting fatigue during operation.

3-Inch Turning Radius

Cut circles with radiuses of 3 inches and up to help take on projects with a lot of turns and curves.

Product description

The DEWALT DCS494M2 20V MAX* 14ga Swivel Head Shear Kit is a 360 degree tool with a free swivel head which allows user to access tight quarters while maintaining comfort. These shears can cut a 7/32" strip which continuously curls out of the cutting area providing consistent and accurate cuts. They also features an LED work light which illuminates surface areas. Cordless shears allows user to take the tool to the workplace. Capacity (stainless steel): 16ga, Capacity (mild steel): 14ga, Speed: 2,450 spm, Min cutting radius: 5 Inches. Includes: DCS494 shears, 20v Max* Battery, Hex wrench.

• 360 degree tool with a free swivel head which allows user to access tight quarters
• Cuts 7/32" strip which continuously curls out of the cutting area providing accurate cuts
• LED work light illuminates surface
• Cordless shears allows user to take the tool to the workplace

User questions & answers